1
IS 1885 : Part 58 : 2022
ELECTRO TECHNICAL VOCABULARY PART 58 TELECOMMUNICATION CHANNELS AND NETWORKS
LITD 13
1
Terminology
2
IS 9000 : Part 4 : 2020
Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision )
LITD 1
2
Methods of tests
3
IS 9000 : Part 7 : Sec 1 : 2018
Basic environmental testing procedures for electronic and electrical items: Part 7 impact test: Sec 1 shock (Test Ea) (Second Revision)
LITD 1
2
Methods of tests
4
IS 9000 : Part 7 : Sec 7 : 2020
Environmental Testing Part 7 Tests Section 7 Test Eh: Hammer tests ( First Revision )
LITD 1
1
Methods of tests
5
IS/IEC 62341 : Part 2 : Sec 1 : 2015
Organic Light Emitting Diode OLED displays- Part 2-1: Essential ratings and characteristics of OLED display modules
LITD 4
Product Specification
6
IS/IEC 62341 : Part 5 : 2009
Organic Light Emitting Diode OLED displays- Part 5: Environmental testing methods
LITD 4
Methods of tests
7
IS 9000 : Part 11 : 1983
Basic environmental testing procedures for electronic and electrical items: Part 11 salt mist test
LITD 1
Methods of tests
8
IS 9000 : Part 19 : Sec 1 to 5 : 1986
Basic environmental testing procedures for electronic and electrical items: Part 19 test u: robustness of terminations and integral mounting devices (First Revision)
LITD 5
1
Methods of tests
9
IS 9000 : Part 22 : 1983
Basic environmental testing procedures for electronic and electrical items: Part 22 fine mist test
LITD 1
Methods of tests
10
IS 9001 : Part 19 : 2006
Guidance for environmental testing: Part 19 salt mist test
LITD 1
Methods of tests
11
IS 9001 : PART 20 : 2010
Guidance for environmental testing: Part 20 calculation of uncertainty of conditions in climatic test chambers
LITD 1
Methods of tests
12
IS 9002 : Part 3 : 1979
Specification for Equipment for environmental tests for electronic and electrical items: Part 3 humidity chamber
LITD 1
Methods of tests
13
IS 9002 : Part 6 : 1980
Specification for equipment for environmental tests for electronic and electrical items: Part 6 constant relative humidity chamber (Non - Injection Type)
LITD 1
Methods of tests
14
IS 13736 : Part 1 : 2018
Classification of environmental conditions: Part 1 environmental parameters and their severities (First Revision)
LITD 1
1
Code of Practice
15
IS 1885 : Part 45 : 1977
Electrotechnical vocabulary: Part 45 capacitors
LITD 5
Terminology
16
IS 13736 : Part 2 : Sec 1 : 2020
Classification of Environmental Conditions Part 2 Environmental Conditions Appearing in Nature Section 1 Temperature and humidity ( First Revision )
LITD 1
1
Terminology
17
IS 13736 : Part 2 : Sec 3 : 2020
Classification of Environmental Conditions Part 2 Environmental Conditions Appearing in Nature Section 3 Air pressure ( First Revision )
LITD 1
1
Terminology
18
IS/IEC 60695 : Part 11 : Sec 5 : 2016
Fire Hazard Testing Part 11 Test Flames Section 5 Needle - Flame test method - Apparatus, confirmatory test arrangement and guidance ( First Revision )
LITD 1
Methods of tests
19
IS 13736 : Part 3 : Sec 6 : 1993
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 6 ship environment
LITD 1
Code of Practice
20
IS 824 : 2021
Preferred number series for Resistors and Capacitors
LITD 5
1
Code of Practice
21
IS 5001 : Part 1 : 1969
Guide for Preparation of Drawings of Semiconductor Devices
LITD 5
Code of Practice
22
IS 16125 : Part 1 : 2014
Information technology - Multimedia content description interface: Part 1 systems
LITD 23
Others
23
IS/ISO/IEC 30107 : Part 1 : 2016
Information technology Biometric presentation attack detection Part 1: Framework
LITD 32
Others
24
IS 7354 : Part 3 : 2011
Guide on reliability of electronic and electrical items: Part 3 presentation and specification of reliability data for electronic components (Second Revision)
LITD 2
2
Code of Practice
25
IS 8161 : Part 4 : 2018
Equipment reliability testing: Part 4 statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals (First Revision)
LITD 2
1
Code of Practice
26
IS 15037 : 2020
Reliability Block Diagrams ( Second Revision )
LITD 2
2
Code of Practice
27
IS 15038 : 2011
Reliability growth - Statistical test and estimation methods (First Revision)
LITD 2
1
Methods of tests
28
IS 15444 : Part 1 : 2012
Reliability stress screening: Part 1 repairable assemblies Manufactured in lots (First Revision)
LITD 2
1
Methods of tests
29
IS 15444 : Part 2 : 2020
Reliability Stress Screening Part 2 Components ( First Revision )
LITD 2
1
Code of Practice
30
IS/ISO/IEC 10373 : Part 8 : 2011
Identification cards Test methods Part 8: USB-ICC
LITD 16
Methods of tests
31
IS 11413 : 1986
Character structure for start/stop and synchronous transmission for information processing
LITD 13
Code of Practice
32
IS/ISO/IEC 11801 : Part 2 : 2017
Water Reuse in Urban Areas Guidelines for Centralized Water Reuse System Part 1 Design Principle of a Centralized Water Reuse System
LITD 13
Product Specification
33
IS 17192 : Part 2 : 2020
Robotics — Performance Criteria and Related Test Methods for Service Robots Part 2 Navigation
PGD 18
Methods of tests
34
IS 10437 : 2019
Safety requirements for radio transmitting equipment - General requirements and terminology (Second Revision)
LITD 12
2
Others
35
IS/ISO/IEC 9796 : PART 2 : 2010
Information technology - Security techniques - Digital signature schemes g4ing message recovery: Part 2 integer factorization based mechanisms (First Revision)
LITD 17
1
Others
36
IS/ISO/IEC 19794 : Part 4 : 2011
Information Technology - Biometric Data Interchange Formats Part 4 Finger Image Data
LITD 32
Others
37
IS/ISO/IEC 9796 : Part 3 : 2006
Information technology - Security techniques - Digital signature schemes giving message recovery: Part 3 discrete logarithm based mechanisms
LITD 17
Others
38
IS 15580 : 2012
Information technology - Security techniques - Systems: Security engineering - Capability maturity model® (SSE - CMM®) (First Revision)
LITD 17
1
Others
39
IS/ISO/IEC 27000 : 2018
Information technology - Security techniques - information: Security management systems - Overview and vocabulary (First Revision)
LITD 17
1
Terminology
40
IS/ISO/IEC 27034 : Part 2 : 2015
Information technology - Security techniques - Application Security: Part 2 organization normat4e framework
LITD 17
Others
41
IS/ISO/IEC 27034 : Part 5 : 2017
Information technology - Security techniques - Application Security: Part 5 protocols and application Security controls data structure
LITD 17
Others
42
IS/ISO/IEC 27001 : 2022
Information security cybersecurity and privacy protection Information security management systems Requirements
LITD 17
2
System Standard
43
IS/ISO/IEC 27003 : 2017
Information technology - Security techniques - Information: Security management systems - Guidance (First Revision)
LITD 17
1
Others
44
IS/ISO/IEC 27004 : 2016
Information technology - Security techniques - Information: Security management - Monitoring, measurement, analysis and evaluation (First Revision)
LITD 17
1
Others
45
IS/ISO/IEC 27005 : 2023
Information security cybersecurity and privacy protection Guidance on managing information security risks
LITD 17
3
Methods of tests
46
IS/ISO/IEC 27033 : Part 1 : 2015
Information Technology - Security Techniques - Network Security Part 1 Overview and Concepts (First Revision)
LITD 17
1
Others
47
IS/ISO/IEC 29100 : 2011
Information Technology - Security Techniques - Privacy Framework
LITD 17
Others
48
IS/ISO/IEC 19796 : PART 3 : 2009
Information technology - Learning, education and training - Quality management, assurance and metrics: Part 3 reference methods and metrics
LITD 19
Code of Practice
49
IS/ISO/IEC 23988 : 2007
Information technology - A code of practice for the use of information technology (IT) in the delivery of assessments
LITD 19
Code of Practice
50
IS/ISO/IEC 24751 : PART 1 : 2008
Information Technology Individualized--Adaptability And Accessibility In--E-learning, Education And Training--Part 1 Framework And Reference Model
LITD 19
Code of Practice
51
IS/ISO/IEC 24751 : PART 2 : 2008
Information technology - Individualized adaptability and accessibility in E-Learning, education and training: Part 2 Access for all personal needs and preferences for digital delivery
LITD 19
Code of Practice
52
IS/ISO/IEC 24751 : PART 3 : 2008
Information technology - Individualized adaptability and accessibility in E - Learning, education and training: Part 3 "Access for all" digital resource description
LITD 19
Code of Practice
53
IS/ISO/IEC/TR 29163 : Part 1 : 2009
Information Technology — Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition Part 1 Overview Version 1.1
LITD 19
Code of Practice
54
IS/ISO/IEC/TR 29163 : Part 4 : 2009
Information Technology — Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition Part 4 Sequencing and Navigation Version 1.1
LITD 19
Code of Practice
55
IS 16125 : Part 2 : 2013
Information technology - Multimedia content description interface: Part 2 description definition language
LITD 23
Others
56
IS 1885 : Part 85 : 2003
Electrotechnical vocabulary: Part 85 electromagnetic compatibility
LITD 9
Code of Practice
57
IS 6873 : Part 1 : 2010
Limits and methods of measurements of radio disturbance characteristics: Part 1 vehicles, boats and internal combustion engines (Third Revision)
LITD 9
3
Methods of tests
58
IS 6873 : PART 2 : SEC 1 : 2024
Limits and Methods of Measurement of Radio Disturbance Characteristics PART 2 Electromagnetic Compatibility (EMC) � Requirements for Household Appliances, Electric Tools and Similar Apparatus Section 1 Emission ( Fourth Revision)
LITD 9
4
Product Specification
59
IS 6873 : PART 2 : SEC 2 : 2024
Limits and Methods of Measurement of Radio Disturbance Characteristics Part 2 Electromagnetic Compatibility (EMC) — Requirements for Household Appliances, Electric Tools and Similar Apparatus Section 2 Immunity — Product Family Standard (Fifth Revision)
LITD 9
5
Product Specification
60
IS 6873 : Part 5 : 2019
Limits and Methods of Measurement of Radio Disturbance Characteristics Part 5 Electrical Lighting and Similar Equipment ( Third Revision )
LITD 9
3
Product Specification
61
IS 12233 : Part 3 : 2019
Radio Interference Characteristics of Overhead Power Lines and High-Voltage Equipment Part 3 Code of Practice for Minimizing the Generation of Radio Noise ( Second Revision)
LITD 9
2
Code of Practice
62
IS 3544 : 1966
General requirements and tests for tag strips (First Revision)
LITD 3
1
Dimensions
63
IS 3720 : 1983
Dimensions of plugs for hearing aids (First Revision)
LITD 7
1
Dimensions
64
IS 17041 : 2018
Software Quality Engineering — Development Process — Software Development Management System ( SDMS ) — Requirements
LITD 14
Others
65
IS 18010 : Part 1 : 2020
Unified Digital Infrastructure - Unified Last Mile Communication Protocols Stack Part 1 Reference Architecture ( UDI - ULMCPS - RA )
LITD 28
Code of Practice
66
IS/ISO/IEC 13863 : 1998
Information Technology - Telecommunications and Information Exchange Between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows - Path Replacement Additional Network Feature
LITD 13
Code of Practice
67
IS/ISO/IEC 27034 : Part 7 : 2018
Information Technology - Application Security Part 7 Assurance Prediction Framework
LITD 17
Others
68
IS/ISO/IEC/TR 27103 : 2018
Information Technology - Security Techniques - Cybersecurity and ISO and IEC Standards
LITD 17
Others
69
IS/IEC 60706 : Part 2 : 2006
Maintainability of equipment Part 2 Maintainability requirements and studies during the design and development phase
LITD 2
Code of Practice
70
IS 5054 : Part 1 : Sec 1 : 1995
Radio frequency connectors: Part 1 general requirements and measuring methods: Sec 1 general (Second Revision)
LITD 6
2
Product Specification
71
IS 5054 : Part 1 : Sec 2 : 1995
Radio frequency connectors:Pt 1 General requirements and measuring methods:Sec 2 Electrical tests and measuring procedures: Reflection factor
LITD 6
2
Methods of tests
72
IS 5054 : Part 1 : Sec 3 : 1995
Radio frequency connectors : Part 1 General requirements and measuring methods: Sec 3 Electrical tests and measuring procedures : Screening effectiveness
LITD 6
2
Methods of tests
73
IS/ISO/IEC/IEEE 42020 : 2019
Software systems and enterprise Architecture processes
LITD 14
Process Specification
74
IS 5054 : Part 8 : 2013
Radio Frequency Connectors Part 8 Sectional Specification - RF Coaxial Connectors with Inner Diameter of Outer Conductor 6.5 mm (0.256 in) with Bayonet Lock - Characteristic Impedance 50 ohm (Type BNC)
LITD 6
Methods of tests
75
IS 5054 : Part 24 : 2007
Radio frequency connectors: Part 24 radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
LITD 6
Product Specification
76
IS/ISO/IEC 24779 : Part 5 : 2020
Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use with biometric systems Part 5: Face applications
LITD 32
Others
77
IS 16180 : Part 13 : 2018
Fibre optic connector interfaces: Part 13 type fc - Pc connector
LITD 11
Code of Practice
78
IS 418 : 2004
Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)
ETD 23
4
Product Specification
79
IS 15111 : Part 1 : 2002
Self ballasted lamps for general lighting services: Part 1 safety requirements
ETD 23
Safety Standard
80
IS 1885 : Part 59 : 1986
Electrotechnical vocabulary: Part 69 educational or training equipment and systems
LITD 36
Terminology
81
IS 11404 : Part 1 : 2018
Information processing - Data interchange on 130 mm (5.25 In) flexible disk cartridges using twoFrequency recording at 7 958 ftprad, 1.9 tpmm (48 Tpi), on one side: Part 1 dimensional, physical and magnetic characteristics (First Revision)
LITD 36
1
Others
82
IS 11406 : 1986
File structure and lABelling of flexible disk cartridges for information interchange
LITD 36
Product Specification
83
IS 11409 : 2006
Information processing - 9 - Track, 12.7 mm (0.5 In) wide magnetic tape for information interchange using NRZI at 32 ftpmm (800 Ftpi) - 32 cpmm (800 Cpi) (First Revision)
LITD 36
1
Product Specification
84
IS 11410 : 2006
Information processing - 9 - Track, 12.7 mm (0.5 In) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3 200 Ftpi) - 63 cpmm (1 600 Cpi) (First Revision)
LITD 36
1
Product Specification
85
IS 11853 : Part 3 : 1986
Data Interchange on 130 mm, Double Sided, 3.8 tpmm, Flexible Disk Cartridge Using Modified Frequency Recording - Part 3 : Track Format B
LITD 36
Product Specification
86
IS 12660 : 1989
Information processing - Magnetic tape cassette and cartridge labelling and file structure for information interchange
LITD 36
Product Specification
87
IS 12922 : Part 1 : 1989
Specification for 90 mm flexible disk cartridge using 3 - Frequency recording at 7 958 ftprad on 80 tracks on each side: Part 1 dimensional, physical and magnetic characteristics
LITD 36
Product Specification
88
IS 12922 : Part 2 : 1989
Specification for 90 mm flexible disk cartridge using 3 frequency r - Ecording at 7 958 ftprad on 80 tracks on each side: Part 2 track format
LITD 36
Product Specification
89
IS 13384 : Part 2 : 1997
Cathode ray tube based data display monitor - Specificaiton: Part 2 monochrome
LITD 4
Product Specification
90
IS 13737 : 1993
Information technology - 130 mm rewritABle optical disk cartridge for information interchange
LITD 36
Product Specification
91
IS 13738 : Part 2 : 1993
Information processing systems - Data interchange on 90 mm flexible disk cartridges using 3 frequency modulation recording at 15 916 ftprad, on 80 tracks on each side: Part 2 track - Format
LITD 36
Product Specification
92
IS 14147 : Part 2 : 2021
Identification cards Recording technique part 2 Magnetic stripe Low coercivity
LITD 16
3
Product Specification
93
IS/ISO/IEC 10373 : Part 5 : 2014
Identification Cards - Test Methods Part 5 Optical Memory Cards
LITD 16
Methods of tests
94
IS 14174 : 2013
Information technology - Identification cards - Financial transaction cards (First Revision)
LITD 16
1
Product Specification
95
IS 14176 : 1994
Information processing - Volume and file structure of CD - ROM for information interchange
LITD 36
Product Specification
96
IS 14202 : Part 1 : 2014
Identification cards - Integrated circuit cards: Part 1 cards with contacts - Physical characteristics (Second Revision)
LITD 16
2
Product Specification
97
IS 14202 : Part 3 : 2013
Identification cards - Integrated circuit cards: Part 3 cards with contacts - Electrical interface and transmission protocols (First Revision)
LITD 16
1
Product Specification
98
IS 14202 : Part 4 : 2021
Identification cards Integrated circuit cards Part 4: Organization security and commands for interchange First Revision
LITD 16
1
Product Specification
99
IS 14202 : Part 5 : 2013
Identification cards - Integrated circuit cards: Part 5 registration of application providers (First Revision)
LITD 16
1
Product Specification
100
IS 16791 : 2018
Digital Set Top Box for IPTV Specification
LITD 7
Product Specification
101
IS 14202 : Part 7 : 2013
Identification cards - Integrated circuit cards: Part 7 interindustry commands for structured card query language (SCQL)
LITD 16
Code of Practice
102
IS 14202 : Part 10 : 2013
Identification cards - Integrated circuit cards: Part 10 electronic signals and answer to reset for synchronous cards
LITD 16
Product Specification
103
IS 14202 : Part 13 : 2013
Identification cards - Integrated circuit cards: Part 13 commands for application management in a multi - Application environment
LITD 16
Product Specification
104
IS 14441 : 1997
Specification for keyboard
LITD 36
Product Specification
105
IS 14701 : 1999
Information technology - 90 mm optical disk cartridges, rewritable and read only, for data interchange
LITD 36
Product Specification
106
IS 14886 : 2000
Switch mode power supply - Specificaiton
LITD 36
Product Specification
107
IS 14896 : 2001
Personal computer - Specificaiton
LITD 36
Product Specification
108
IS 15189 : 2002
Information technology - Data interchange on read - Only 120 mm optical data disks (Cd - Rom)
LITD 36
Product Specification
109
IS/IEC 60990 : 2016
Methods of measurement of touch current and protective conductor current (First Revision)
LITD 7
1
Methods of tests
110
IS/IEC 60318 : Part 5 : 2006
Electroacoustics Simulators of Human Head and Ear Part 5 2 cm3 Coupler for the Measurement of Hearing Aids and Earphones Coupled to the Ear by Means of Ear Inserts
LITD 7
Product Specification
111
IS 10315 : 1997
7 Bit coded character set for information interchange (First Revision)
LITD 20
1
Code of Practice
112
IS 10401 : 1998
8 Bit coded character set for information interchange (First Revision)
LITD 20
1
Code of Practice
113
IS 11407 : 1986
Implementation of the 7 - Bit coded character set and its 7 - Bit and 8 - Bit extensions on 9 - Track 12.7mm magnetic tape
LITD 20
Code of Practice
114
IS 12877 : 1989
Implementation of the 7 - Bit coded character set and its 7 - Bit extensions on 3.81 mm ,for 0 , 0 magnetic tape cassette data interchange
LITD 20
Code of Practice
115
IS 16561 : Part 2 : 2017
Ergonomic design of control centres Part 2 Principles for the Arrangement of Control Suites
PGD 15
Code of Practice
116
IS 9859 : Part 2 : 2023
Installation and Maintenance of Outdoor Power Line Carrier Equipment � Code of Practice Part 2 Coupling Devices ( First Revision )
LITD 10
1
Code of Practice
117
IS 9859 : Part 3 : 2023
Installation and Maintenance of Outdoor Power Line Carrier Equipment � Code of Practice Part 3 Coupling Capacitors/Capacitor Voltage Transformers ( First Revision )
LITD 10
1
Code of Practice
118
IS 15654 : 2006
Supervisory Control and Data Acquisition (SCADA) System for Oil and Gas Pipeline
LITD 10
Code of Practice
119
IS 15953 : 2011
Supervisory control and data acquisition (SCADA) system for power system applications
LITD 10
Methods of tests
120
IS 7616 : 2021
CALCULATION OF THE EFFECTIVE PARAMETERS OF MAGNETIC PIECE PARTS First Revision
LITD 24
1
Product Specification
121
IS 10370 : Part 1 : 1982
Dimensions of mounting accessories of pot cores for wired circuits: Part 1 for pot cores of size 26 x 16 mm
LITD 24
Dimensions
122
IS 10370 : Part 3 : 1982
Dimensions of mounting accessories of pot cores for wired circuits: Part 3 for pot cores of size 18 x 14 mm
LITD 24
Dimensions
123
IS 11392 : Part 2 : Sec 1 : 1985
Dimensions of mounting accessories of pot cores for printed circuit board mountings: Part 2 for pot cores of size 26 x 16 (Mm): Sec 1 type 1
LITD 24
Dimensions
124
IS/ISO/IEC/TS 27034 : Part 5 : Sec 1 : 2018
Information Technology - Application Security Part 5-1 Protocols and Application Security Controls Data Structure, XML Schemas
LITD 17
Others
125
IS 15414 : 2018
Identification cards - Financial transaction cards - Magnetic stripe data content for track 3 (First Revision)
LITD 16
1
Product Specification
126
IS/ISO/IEC 11801 : Part 1 : 2017
Information technology Generic cabling for customer premises Part 1: General requirements
LITD 13
Product Specification
127
IS/ISO/IEC/TR 29196 : 2018
Information Technology - Guidance for Biometric Enrolment
LITD 32
Methods of tests
128
IS 17437 : 2020
Mobile Robots — Vocabulary
PGD 18
Terminology
129
IS/ISO/IEC 19752 : 2017
Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
LITD 36
Methods of tests
130
IS/ISO/IEC 14888 : Part 1 : 2008
Information technology - Security techniques - Digital signatures with appendix: Part 1 general
LITD 17
Others
131
IS/ISO/IEC 14888 : Part 2 : 2008
Information technology - Security techniques - digital signatures with appendix: Part 2 integer factorization based mechanisms
LITD 17
Others
132
IS/ISO/IEC/TR 20000 : Part 5 : 2022
Information technology Service management Part 5: Implementation guidance for IS/ISO/IEC 20000-1 (First Revision)
LITD 14
1
Others
133
IS/ISO/IEC 19086 : Part 1 : 2016
Information Technology Cloud Computing Service Level Agreement SLA Framework Part 1 : Overview and Concepts
SSD 10
Service Specification
134
IS/ISO/IEC 27034 : Part 3 : 2018
Information Technology - Application Security Part 3 Application Security Management Process
LITD 17
Others
135
IS 15474 : Part 3 : Sec 15 : 2021
Cranes — Monitoring for Crane Design Working Period
LITD 2
Code of Practice
136
IS/IEC 60068 : Part 2 : Sec 13 : 2021
Environmental Testing Part 2 Tests Section 13 Test M: Low air pressure
LITD 1
Methods of tests
137
IS/ISO/IEC 29101 : 2018
Information Technology — Security Techniques — Privacy Architecture Framework
LITD 17
Others
138
IS 16242 : Part 3 : 2014
Uninterruptible power systems (UPS): Part 3 method of specifying the performance and test requirements
ETD 31
Methods of tests
139
IS 16242 : Part 2 : 2020
Uninterruptible Power Systems UPS Part 2 Electromagnetic Compatibility EMC Requirements ( First Revision )
ETD 31
1
Methods of tests
140
IS 16419 : Part 2 : 2022
Information technology Software asset management Part 2: Software identification tag
LITD 14
Others
141
SP 7 : 2016
National building code of India: Part 0 integrated approach - Prerequisite for applying provisions of the code
CED 46
3
Others
142
IS 12897 : 2001
Filaments for general service lamps - Guide (First Revision)
ETD 23
1
Others
143
IS 15967 : Part 1 : 2013
Capacitors for use in tubular fluorescent and other discharge lamp circuits: Part 1 safety requirements
ETD 23
Safety Standard
144
IS 15967 : Part 2 : 2013
Capacitors for use in tubular fluorescent and other discharge lamp circuits: Part 2 performance requirements
ETD 23
Product Specification
145
IS 16049 : 2013
Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Sealed nickel - Cadmium prismatic rechargeable single cells
ETD 11
Product Specification
146
IS 4804 : Part 1 : 1968
Specification for resistance welding equipment: Part 1 single - Phase transformers
ETD 21
Product Specification
147
IS 10894 : 1984
Code of practice for lighting of educational institutions
ETD 49
Code of Practice
148
IS 10947 : 1984
Code of practice for lighting for ports and harbours
ETD 49
Code of Practice
149
IS 11116 : 1984
Code of practice for lighting for airport aprons
ETD 49
Code of Practice
150
IS 12309 : Part 1 : 1988
Code of practice for installation and maintenance of aerodrome lighting fittings
ETD 49
Code of Practice
151
IS 12309 : Part 2 : 1988
Code of practice for installation and maintenance of aerodrome lighting fittings: Part 2 maintenance
ETD 49
Code of Practice
152
IS 1944 : Part 5 : 1981
Code of practice for lighting of public thoroughfares: Part 5 lighting for grade separated junctions, bridges and elevated road (Group D)
ETD 49
Code of Practice
153
IS 1944 : Part 6 : 1981
Code of practice for lighting of public thoroughfares: Part 6 lighting for town and city centres and areas of civic importance (Group E)
ETD 49
Code of Practice
154
IS 1944 : Part 7 : 1981
Code of practice for lighting of public thoroughfares: Part 7 lighting for roads with special requirements (Group F)
ETD 49
Code of Practice
155
IS 2672 : 1966
Code of practice for library lighting
ETD 49
Code of Practice
156
IS 3646 : Part 1 : 1992
Code of practice for interior illumination: Part 1 general requirements and recommendations for working interiors (First Revision)
ETD 49
1
Code of Practice
157
SP 72 : 2010
National lighting code 2010
ETD 49
Code of Practice
158
IS 4347 : 1967
Code of practice for hospital lighting
ETD 49
Code of Practice
159
IS 6665 : 1972
Code of practice for industrial lighting
ETD 49
Code of Practice
160
IS 1944 : Part 1 and 2 : 1970
Code of practice for lighting of public thoroughfares (First Revision)
ETD 49
1
Code of Practice
161
IS 10322 : Part 1 : 2014
Luminaires: Part 1 general requirements and tests (First Revision)
ETD 49
Product Specification
162
IS 7537 : 1974
Specification for road traffic signals
ETD 49
Product Specification
163
IS 10322 : Part 5 : Sec 5 : 2013
Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)
ETD 49
1
Product Specification
164
IS 10322 : Part 5 : Sec 1 : 2012
Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)
ETD 49
1
Product Specification
165
IS 10322 : Part 5 : Sec 2 : 2012
Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)
ETD 49
1
Product Specification
166
IS 10322 : PART 5 : SEC 3 : 2012
Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)
ETD 49
1
Product Specification
167
IS 10322 : Part 5 : Sec 6 : 2013
Luminaires: Part 5 particular requirements: Sec 6 handlamps
ETD 49
Product Specification
168
IS 10322 : Part 5 : Sec 8 : 2013
Luminaires: Part 5 particular requirements: Sec 8 emergency lighting
ETD 49
Product Specification
169
IS/ISO/IEC/IEEE 42010 : 2022
Software, Systems and Enterprise � Architecture Description (First Revision)
LITD 14
1
Others
170
IS 16107 : Part 1 : 2012
Luminaires performance: Part 1 general requirements
ETD 49
Product Specification
171
IS 16107 : Part 2 : Sec 1 : 2012
Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire
ETD 49
Product Specification
172
IS 10322 : Part 5 : Sec 4 : 1987
Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires
ETD 49
Product Specification
173
IS 16106 : 2012
Method of electrical and photometric measurements of solid state lighting (Led) products
ETD 23
Methods of tests
174
IS 16105 : 2012
Method of measurement of lumen maintenance of solid state light (Led) sources
ETD 23
Methods of tests
175
IS 16101 : 2012
General lighting - Leds and led modules - Terms and definitions
ETD 23
Terminology
176
IS 15111 : Part 2 : 2002
Self ballasted lamps for general lighting services: Part 2 performance requirements
ETD 23
Product Specification
177
IS/ISO/IEC 20000 : Part 10 : 2018
Information Technology Service Management Part 10 Concepts and Vocabulary (First Revision)
LITD 14
1
Terminology
178
IS/ISO/IEC 12785 : Part 2 : 2011
Information technology - Learning, education and training - Content packaging: Part 2 XML binding
LITD 19
Code of Practice
179
IS/ISO/IEC/TR 27039 : 2015
Information Technology - Security Techniques - Selection, Deployment and Operations of Intrusion Detection Systems ( IDPS )
LITD 17
Code of Practice
180
IS/ISO/IEC/TS 20540 : 2018
Information Technology - Security Techniques - Testing Cryptographic Modules in their Operational Environment
LITD 17
Methods of tests
181
IS/ISO/IEC 19794 : Part 3 : 2006
Information Technology - Biometric Data Interchange Formats Part 3 Finger Pattern Spectral Data
LITD 32
Others
182
IS/ISO/IEC 19794 : Part 15 : 2017
Information Technology - Biometric Data Interchange Format Part 15 Palm Crease Image Data
LITD 32
Others
183
IS 15474 : Part 1 : 2019
Dependability Management Part 1 Guidance for Management and Application
LITD 2
Code of Practice
184
IS 15474 : Part 3 : Sec 14 : 2019
Dependability Management Part 3 Application Guide Section 14 Maintenance and maintenance support
LITD 2
Code of Practice
185
IS 9000 : Part 7 : Sec 3 : 2019
Environmental testing: Part 7 tests :: Sec 3 test Ec: rough handling shocks, primarily for equipment - Types specimens (First Revision)
LITD 1
Methods of tests
186
IS 13247 : Part 1 : 2021
Passive filter units for electromagnetic interference suppression Part 1 Generic specification First Revision and Superseding 1 IS 3723Part 1:1978 2 IS 3723Part 2:1983 and 3 IS 3723Part 3:1983
LITD 5
1
Product Specification
187
IS 13247 : Part 2 : 2021
Passive filter units for electromagnetic interference suppression Part 2 Sectional specification Passive filter units for which safety tests are appropriate Test methods and general requirements First Revision of IS 13247 Part 2
LITD 5
1
Product Specification
188
IS/IEC/TR 62351 : Part 13 : 2016
Power systems management and associated information exchange - Data and communications security Part 13: Guidelines on security topics to be covered in standards and specifications
LITD 10
Code of Practice
189
IS/ISO/IEC 29109 : Part 8 : 2011
Information technology - Conformance Testing Methodology For Biometric Data Interchange Formats Defined in ISO/IEC 19794 Part 8 Finger Pattern Skeletal Data
LITD 32
Methods of tests
190
IS/ISO/IEC 29109 : Part 9 : 2011
Information Technology - Conformance Testing Methodology for Biometric Data Interchange Formats Defined in ISO/IEC 19794 Part 9 vascular image Data
LITD 17
Methods of tests
191
IS/ISO/IEC 12785 : Part 1 : 2009
Information technology - Learning, education and training - Content packaging: Part 1 information model
LITD 19
Code of Practice
192
IS 14700 : Part 3 : Sec 2 : 2020
Electromagnetic Compatibility (EMC) Part 3 Limits Section 2 Limits for harmonic current emissions ( equipment input current ? 16 A per phase ) ( Third Revision )
LITD 9
3
Methods of tests
193
IS 14700 : Part 4 : Sec 17 : 2018
Electromagnetic Compatiblity (EMC) Part 4 Testing & Measurement Techniques Section 17 Ripple on d.c input Power Port Immunity Test
LITD 9
Methods of tests
194
IS 14700 : Part 4 : Sec 1 : 2019
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 1 overview of the IEC 61000 - 4 series (Second Revision)
LITD 9
2
Methods of tests
195
IS 14700 : Part 4 : Sec 12 : 2019
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 12 ring wave immunity test (Second Revision)
LITD 9
1
Methods of tests
196
IS/ISO/IEC 27050 : Part 1 : 2019
Information technology Electronic discovery Part 1: Overview and concepts
LITD 17
1
Others
197
IS/ISO/IEC 27050 : Part 3 : 2020
Information technology Electronic discovery Part 3: Code of practice for electronic discovery
LITD 17
1
Code of Practice
198
IS 14700 : Part 4 : Sec 16 : 2019
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 16 test for immunity to conducted, common mode disturbances in the frequency range 0 hz to 150 kHz (Second Revision)
LITD 9
1
Methods of tests
199
IS/ISO/IEC 27034 : Part 6 : 2016
Information technology - Security techniques - Application Security: Part 6 case studies
LITD 17
Others
200
IS 14700 : Part 4 : Sec 3 : 2023
Electromagnetic compatibility EMC Part 4 Testing and Measurement Techniques Section 3 Radiated radio-frequency electromagnetic field immunity test Second Revision
LITD 9
4
Methods of tests
201
IS 14700 : Part 4 : Sec 9 : 2019
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 9 impulse magnetic field immunity test (Second Revision)
LITD 9
2
Methods of tests
202
IS 10249 : Part 1 : 1982
Specification for voltage dependent resistors (Varistors): Part 1 general requirements and methods of tests
LITD 5
Methods of tests
203
IS 14700 : Part 6 : Sec 2 : 2019
Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 2 Immunity standard for industrial environments ( First Revision )
LITD 9
1
Methods of tests
204
IS 14700 : Part 4 : Sec 5 : 2019
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 5 surge immunity test (First Revision)
LITD 9
1
Methods of tests
205
IS/IEC/TR 62283 : 2010
Optical Fibres — Guidance for Nuclear Radiation Test
LITD 11
Methods of tests
206
IS 15040 : 2020
Radio Disturbance Characteristics for Protection of Receivers used on Board Vehicles, Boats and Internal Combustion Engines — Limits and Methods of Measurement ( Second Revision )
LITD 9
2
Product Specification
207
IS/IEC 60139 : 2000
Preparation of outline drawings for cathode - Ray tubes, their components, connections and gauges
LITD 4
Code of Practice
208
IS 11534 : Part 1 : 1985
Specification for directly heated positive step - Function temperature coefficient thermistors: Part 1 general requirements and methods of tests
LITD 5
Methods of tests
209
IS 11658 : 1986
General requirements and methods of tests of piezoelectric ceramic pressure transducers - Dynamic type
LITD 24
Methods of tests
210
IS 11880 : 1986
Specification for piezoelectric ceramic trilaminate elements used in phonograph pick - Ups, ultrasonic transducers and similar devices
LITD 24
Product Specification
211
IS 10071 : 1981
Methods of measurement for hot cathode gas - Filled tube
LITD 4
Methods of tests
212
IS 10503 : 1983
Methods of measurement of colour television picture tubes
LITD 4
Methods of tests
213
IS 10467 : 1983
Listening test on loudspeaker
LITD 7
Methods of tests
214
IS 1885 : Part 4 : Sec 2 : 1973
Electrotechnical vocabulary: Part 4 electron tubes: Sec 2 X - Ray tubes (First Revision)
LITD 4
1
Terminology
215
IS 12970 : Part 2 : 2021
Semiconductor devices - Integrated circuits : Part 2 Digital integrated circuits essential ratings and characteristics Sec 1 General
LITD 5
0
Product Specification
216
IS 4697 : 1968
Methods of measurements on geiger - Muller counter tubes
LITD 4
Methods of tests
217
IS 5323 : 1969
LETTER SYMBOLS AND ABBREVIATIONS FOR ELECTRON TUBES
LITD 4
Terminology
218
IS 5627 : 1987
Methods of measurement of radar and oscilloscope cathode - Ray tubes (First Revision)
LITD 4
1
Methods of tests
219
IS 5840 : Part 1 : 1970
Dimensions of cathode - Ray tubes: Part 1 tube outlines
LITD 4
Dimensions
220
IS 5840 : Part 2 : 1970
Dimensions of cathode - Ray tubes: Part 2 bases
LITD 4
Dimensions
221
IS 13554 : 2020
Measurement of the Dimensions of a Cylindrical Component with Axial Terminations ( First Revision )
LITD 5
1
Methods of tests
222
IS 5840 : Part 3 : 1970
Dimensions of cathode - Ray tubes: Part 3 EHT terminals
LITD 4
Dimensions
223
IS 6134 : Part 1 : 1978
Methods of measurements of electrical characteristics of microwave tubes: Part 1 common to all microwave tubes (First Revision)
LITD 4
Methods of tests
224
IS 6134 : Part 2 : 1973
Methods of measurements on microwave tubes: Part 2 oscillator tubes
LITD 4
Methods of tests
225
IS 10557 : 1983
Specification for Paper Tape Rolls for Data Processing
CHD 15
Product Specification
226
IS 6134 : Part 9 : 1981
Methods of measurement of electrical characteristics of microwave tubes: Part 9 Backward-wave oscillator tube '0' type
LITD 4
Methods of tests
227
IS 6214 : 1971
Specification for phosphors for cathode ray tubes
LITD 4
Product Specification
228
IS 6757 : 1972
Dimensions for high tension cable terminations for X - Ray tubes
LITD 4
Dimensions
229
IS 7144 : 1973
Methods of measurements on camera tubes
LITD 4
Methods of tests
230
IS 7146 : Part 2 : 1974
Methods of measurements on photosensitive devices: Part 2 phototubes
LITD 4
Methods of tests
231
IS 7146 : Part 3 : 1974
Methods of measurements on photosensitive devices: Part 3 photo-conductive cells for use in the visible spectrum
LITD 4
Methods of tests
232
IS 7146 : Part 4 : 1974
Methods of measurements on photosensitive devices: Part 4 photomultipliers
LITD 4
Methods of tests
233
IS 8441 : 1977
Methods of measurements on incidental X - Radiation from electron tubes
LITD 4
Methods of tests
234
IS 9883 : 1981
Photometric and colorimetric methods of measurement of the light emitted by a cathoderay tube screen
LITD 4
Methods of tests
235
IS 2032 : Part 14 : 1971
Graphical symbols used in electrotechnology: Part 14 microwave technology
LITD 4
Terminology
236
IS 7146 : Part 1 : 1973
Methods of measurements on photosensitive devices: Part 1 basic considerations
LITD 4
Methods of tests
237
IS 6134 : Part 3 : 1973
Methods of measurements on microwave tubes: Part 3 amplifier tubes
LITD 4
Methods of tests
238
IS 6134 : Part 4 : 1977
Methods of measurement of electrical characteristics of microwave tubes: Part 4 magnetrons
LITD 4
Methods of tests
239
IS 6134 : Part 7 : 1981
Methods of measurement of electrical characteristics of microwave tubes: Part 7 high - Power klystrons
LITD 4
Methods of tests
240
IS 15934 : PART 5 : 2011
Liquid crystal and solid - State display devices: Part 5 environmental, endurance and mechanical test methods
LITD 4
Methods of tests
241
IS 15934 : Part 2 : 2022
Liquid Crystal And Solid-State Display Devices Part 2 Liquid Crystal Display Modules Sectional Specification
LITD 4
1
Product Specification
242
IS 2032 : Part 13 : 1971
Graphical symbols used in electrotechnology: Part 13 microwave tubes
LITD 4
Terminology
243
IS 2032 : Part 9 : 1969
Graphical symbols used in electrotechnology: Part 9 electron tubes (Other Than Microwave Tubes)
LITD 4
Terminology
244
IS 2597 : Part 2 : 1967
Code of practice for the use of electron tubes: Part 2 special quality rece4ing tubes
LITD 4
Code of Practice
245
IS 2597 : Part 1 : 1964
Code of practice for the use of electronic valves: Part 1 commercial rece4ing valves
LITD 4
Code of Practice
246
IS 4147 : 1981
Methods of measurements for electron tubes - Rece4ing and transmitting tubes (First Revision)
LITD 4
1
Methods of tests
247
IS 6134 : Part 8 : 1981
Methods of measurembnt of electrical chara - Cteristics of microwave tubes: Part 8 gas - Filled microwave switching devices
LITD 4
Methods of tests
248
IS 15934 : Part 1 : Sec 1 : 2021
Liquid Crystal Display Devices Part 1-1: Generic Specification
LITD 4
1
System Standard
249
IS 16419 : Part 3 : 2021
Concrete Structures for Retaining Aqueous Liquids - Code of Practice: Part 4 Design Tables: Section 3 Circular tanks (First Revision)
LITD 14
Others
250
IS 6134 : Part 10 : 1981
Methods of measurement of electrical characteristics of microwave tubes: Part 10 crossed - Field amplifier tubes
LITD 4
Methods of tests
251
IS 13252 : Part 1 : 2010
Information technology equipment - Safety: Part 1 general requirements (Second Revision)
LITD 7
2
Safety Standard
252
IS 12327 : Part 3 : 1989
Specification for data interchange on 130 mm double sided 3.8 tpmm high density flexible disk cartridge using 3 frequency modulation recording at 13 262 ftprad (Part 3 Track Format B For 80 Tracks)
LITD 36
Product Specification
253
IS 13384 : Part 1 : 1992
Cathode ray tube based data display monitor - Specificaiton: Part 1 colour
LITD 4
Product Specification
254
IS 14202 : Part 2 : 2014
Identification cards - Integrated circuit cards: Part 2 cards with contacts - Dimensions and location of the contacts (Second Revision)
LITD 16
2
Product Specification
255
IS 14486 : 1997
General purpose dot matrix printer - Specificaiton
LITD 36
Product Specification
256
IS 12970 : Part 1 : 2010
Semiconductor devices integrated circuits: Part 1 general
LITD 5
1
Product Specification
257
IS 12970 : Part 3 : 2021
Semiconductor devices Integrated circuits Part 3 Analogue integrated circuits Superseding 1 IS 12970Part 5Sec 1:1991 2 IS 12970Part 5Sec 2:1992 3 IS 12970Part 5Sec 3:1992 4 IS 12970Part 5Sec 4:1992 5 IS 12970Part 5Sec 5:1993 6 IS 12970Part 5Sec
LITD 5
1
Product Specification
258
IS 13562 : 1992
Terminology related to microprocessors
LITD 5
Terminology
259
IS 14901 : Part 2 : 2020
Semiconductor Devices Part 2 Discrete Devices — Rectifier Diodes ( First Revision )
LITD 5
1
Product Specification
260
IS 14901 : Part 5 : 2004
Semiconductor devices - Discrete devices and integrated circuits: Part 5 optoelectronic devices
LITD 5
Product Specification
261
IS 14901 : Part 7 : 2020
Semiconductor Devices — Discrete Devices Part 7 Bipolar Transistors ( First Revision )
LITD 5
1
Product Specification
262
IS 14901 : Part 8 : 2020
Semiconductor Devices — Discrete Devices Part 8 Field-Effect Transistors ( Second Revision )
LITD 5
2
Product Specification
263
IS 15544 : 2004
Guide to the measurement of equivalent electrical parameters of quartz crystal units
LITD 24
Product Specification
264
IS 8186 : 2020
Marking Codes for Resistors and Capacitors ( First Revision )
LITD 5
1
Terminology
265
IS/ISO/IEC 20563 : 2001
Information Technology — 80 mm ( 1,23 Gbytes per Side ) and 120 mm ( 3,95 Gbytes per Side ) DVD-Recordable Disk ( DVD-R )
LITD 36
Product Specification
266
IS 10775 : 1984
Specification for body level hearing aids
LITD 7
Product Specification
267
IS 15968 : 2013
Ballasts for tubular fluorescent lamps - Performance requirements
ETD 23
Product Specification
268
IS 15974 : 2013
Auxiliaries for lamps starting devices (Other Than Glow Starters) - Performance requirements
ETD 23
Product Specification
269
IS 11980 : 1987
Specification for lamp (Bulb) for cycle dynamo
ETD 23
Product Specification
270
IS 12948 : 1990
Tungsten halogen lamps (Non - Vehicle) - Specification
ETD 23
Product Specification
271
IS 13021 : Part 2 : 1991
AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 2 performance requirements
ETD 23
Product Specification
272
IS 15518 : Part 1 : 2004
Safety requirements for incandescent lamps: Part 1 tungsten filament lamps for domestic and similar general lighting purposes
ETD 23
Safety Standard
273
IS 15687 : Part 1 : 2006
Single - Capped fluorescent lamps: Part 1 safety requirements
ETD 23
Safety Standard
274
IS 1569 : 1976
Specification for capacitors for use in tubular fluorescent, high pressure mercury and low pressure sodium vapour discharge lamp circuits (First Revision)
ETD 23
1
Product Specification
275
IS 2215 : 2006
Starters for fluorescent lamps (Third Revision)
ETD 23
3
Product Specification
276
IS 2262 : 1963
Specification for transformers for high voltage luminous discharge tubes
ETD 23
Product Specification
277
IS 2407 : 1963
Specification for photometric integrators
ETD 23
Product Specification
278
IS 2418 : Part 4 : 1977
Specification for tubular fluorescent lamps for general lighting service: Part 4 go and no - Go gauges for g - 5 and g - 13 bi-pin caps (First Revision)
ETD 23
1
Dimensions
279
IS 2592 : 1980
Specification for lamps for lighting on board ships (First Revision)
ETD 23
1
Product Specification
280
IS 2596 : 2004
Bulbs (Lamps) for Miners' Cap-Lamps
ETD 23
2
Product Specification
281
IS 6701 : 1985
Specification for tungsten filament miscellaneous electric lamps (First Revision)
ETD 23
1
Product Specification
282
IS 8685 : 1977
Specification for aircraft lamps
ETD 23
Product Specification
283
IS 8913 : 1978
Method of measurement of lamp cap temperature rise
ETD 23
Methods of tests
284
IS 8901 : 1978
Specification for lamps for aerodrome lighting fittings
ETD 23
Product Specification
285
IS 16103 : Part 2 : 2012
Led modules for general lighting: Part 2 performance requirements
ETD 23
Product Specification
286
IS 16104 : 2012
D.C. or A.C. supplied electronic control gear for led modules - Performance requirements
ETD 23
Product Specification
287
IS 16102 : Part 1 : 2012
Self - Ballasted led lamps for general lighting services: Part 1 safety requirements
ETD 23
Product Specification
288
IS 16103 : Part 1 : 2012
Led modules for general lighting: Part 1 safety requirements
ETD 23
Product Specification
289
IS 15885 : Part 2 : Sec 13 : 2012
Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules
ETD 23
Product Specification
290
IS 15906 : 2010
Measurement of mercury level in fluorescent lamps
ETD 23
Methods of tests
291
IS 2418 : Part 3 : 1977
Specification for tubular fluorescent lamps for general lighting service: Part 3 dimensions of g - 5 and g - 13 bi - Pin cpas (First Revision)
ETD 23
1
Dimensions
292
IS 15882 : 2009
Ballasts for discharge lamps (Excluding Tubular Fluorescent Lamps) - Performance requirements
ETD 23
Product Specification
293
IS 15885 : PART 1 : 2011
Safety of lamp controlgear: Part 1 general requirements
ETD 23
Product Specification
294
IS 15885 : PART 2 : SEC 1 : 2011
Safety of lamp control gear: Part 2 particular requirements: Sec 1 starting devices (Other Than Glow Starters)
ETD 23
Safety Standard
295
IS 15885 : PART 2 : SEC 3 : 2011
Safety of lamp control gear: Part 2 particular requirements: Sec 3 ac supplied electronic ballasts for fluorescent lamps
ETD 23
Safety Standard
296
IS 15885 : PART 2 : SEC 8 : 2011
Safety of lamp control gear: Part 2 particular requirements: Sec 8 ballasts for fluorescent lamps
ETD 23
Safety Standard
297
IS 15885 : PART 2 : SEC 9 : 2011
Safety of lamp control gear: Part 2 particular requirements: Sec 9 ballasts for discharge lamps (Excluding Fluorescent Lamps)
ETD 23
Safety Standard
298
IS 16108 : 2012
Photobiological safety of lamps and lamp systems
ETD 23
Others
299
IS 9974 : Part 1 : 1981
Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests
ETD 23
Product Specification
300
IS 9974 : Part 2 : 1981
Specification for high pressure sodium vapour lamps: Part 2 standard lamp data sheets
ETD 23
Product Specification
301
IS 9900 : Part 1 : 1981
Specification for high pressure mercury vapour lamps: Part 1 requirements and tests
ETD 23
Product Specification
302
IS 9900 : Part 2 : 1981
Specification for high pressure mercury vapour lamps: Part 2 standard lamp data sheets
ETD 23
Product Specification
303
IS 9900 : Part 3 : 1981
Specification for high pressure mercury vapour lamps: Part 3 dimensions of lamp caps
ETD 23
Dimensions
304
IS 9900 : Part 4 : 1981
High pressure mercury vapour lamps : Part 4 Go and no-go gauges of lamp caps. (Superseding IS : 2183 and IS: 7023)
ETD 23
Dimensions
305
IS 897 : 1982
Specification for tungsten filament electric lamps for railway rolling stock (Second Revision)
ETD 23
2
Product Specification
306
IS 9206 : 1979
Dimensions of caps for tungsten filament general service electric lamps
ETD 23
Dimensions
307
IS 9589 : 1980
Specification for electric lamps for railway signalling
ETD 23
Product Specification
308
IS/IEC 60862 : PART 2 : 2002
Surface acoustic wave (SAW) filters of assessed quality: Part 2 guidance on use
LITD 24
Product Specification
309
IS/QC 001002 : PART 2 : 2000
IEC quality assessment system for electronic components (IECQ) - Rules of procedure: Part 2 Documentation (First Revision)
LITD 5
1
Product Specification
310
IS/QC 001001 : 2000
IEC quality assessment system for electronic components (IECQ) - Basic rules (First Revision)
LITD 5
1
Product Specification
311
IS 11071 : Part 1 : 1984
Specification for inset type aerodrome lighting fittings: Part 1 general requirements and tests
ETD 49
Product Specification
312
IS 11071 : Part 2 : 1984
Specification for inset type aerodrome lighting fittings: Part 2 runway centre line lighting fittings
ETD 49
Product Specification
313
IS/QC 302400 : 1994
Fixed capacitors for use in electronic equipment: Sectional specification for fixed capacitors for electromagnetic interference suppression and connection to the supply mains
LITD 5
Product Specification
314
IS/QC 400100 : 1988
Fixed resistors for use in electronic equipment: Sectional specification fixed low - Power non - Wire wound resistors
LITD 5
Product Specification
315
IS/QC 300701 : 1993
Fixed Capacitors for Use in Electronic Equipment Sectional Fixed Capacitors of Ceramic Dielectric, Class 2
LITD 5
Product Specification
316
IS 17428 : Part 2 : 2020
Data Privacy Assurance Part 2 Engineering and Management Guidelines
LITD 17
Others
317
IS 8271 : Part 6 : Sec 5 : 1991
Quartz crystal units used for frequency control and selection specification: Part 8 series BF for oscillators: Sec 5 quarp crystal unit type BF - 05
LITD 24
Product Specification
318
IS/ISO/IEC 19794 : Part 11 : 2013
Information Technology - Biometric Data Interchange Formats Part 11 Signature/Sign Processed Dynamic Data
LITD 32
Others
319
IS/ISO/IEC 29109 : Part 1 : 2009
Information Technology - Conformance testing Methodology for Biometric Data Interchange Formats Defined in ISO/IEC 19794 Part 1 Generalized Conformance Testing Methodology
LITD 32
Methods of tests
320
IS/ISO/IEC 19794 : Part 10 : 2007
Information Technology - Biometric Data Interchange Formats Part 10 hand Geometry Silhouette Data
LITD 32
Others
321
IS/IEC 61508 : PART 0 : 2005
Functional safety of electrical electronic/programmable electronic safety - Related systems: Part 0 functional safety and IEC 61508
ETD 18
Others
322
IS 11071 : Part 3 : 1984
Specification for inset type aerodrome lighting fittings: Part 3 approach lighting fittings
ETD 49
Product Specification
323
IS 11071 : Part 4 : 1984
Specification for ikset type aerodrome lighting fittings: Part 4 touch down zone lighting fittings
ETD 49
Product Specification
324
IS 11472 : Part 1 : 1985
Specification for artificial daylight for the assessment of colour: Part 1 illuminant for colour matching and colour appraisal
ETD 23
Code of Practice
325
IS 11472 : Part 2 : 1985
Specification for artificial daylight for the assessment of colour: Part 2 viewing conditions for graphic arts industry
ETD 23
Code of Practice
326
IS 12290 : 1987
Specification for isolating transformers for airport lighting systems
ETD 23
Product Specification
327
IS 12291 : 1987
Specification for constant current regulators for airport lighting systems
ETD 23
Product Specification
328
IS 13383 : Part 1 : 1992
Photometry of luminaires - Method of measurement: Part 1 luminaires for use in interior lighting
ETD 49
Methods of tests
329
IS 13383 : Part 2 : 1992
Photometry of luminaires - Method of measurement: Part 2 luminaires for road and street lighting
ETD 49
Methods of tests
330
IS 13383 : Part 3 : 1992
Photometry of luminaires - Methods of measurement: Part 3 luminaires for floodlighting
ETD 49
Methods of tests
331
IS 15934 : Part 10 : Sec 1 : 2016
Liquid crystal display devices: Part 10 environmental, endurance and mechanical test methods: Sec 1 mechanical
LITD 4
Methods of tests
332
IS 7785 : Part 1 : 1975
Specification for elevated type aerodrome lighting fittings: Part 1 general requirements
ETD 49
Product Specification
333
IS 16457 : 2024
Systems and software engineering- System life cycle processes (Second Revision)
LITD 14
2
Others
334
IS 7785 : Part 2 : 1976
Specification for elevated typei aerodrome lighting fittings: Part 2 fixed focus high intensity biqireectional runway edge lighting fittings
ETD 49
Product Specification
335
IS 16448 : 2021
Systems and software engineering — Systems and software quality requirements and evaluation (SQuaRE) — Quality requirements framework (First Revision)
LITD 14
1
Process Specification
336
IS 7785 : Part 3 : 1976
Specification for elevated type aerodrome lighting fittings: Part 3 low intensity runway edge lighting - Fittings
ETD 49
Product Specification
337
IS 16446 : 2021
Systems and software engineering Systems and software Quality Requirements and Evaluation SQuaRE Quality measurement framework First Revision
LITD 14
1
Code of Practice
338
IS 16447 : 2016
Systems and software engineering - Systems and software quality requirements and evaluation (Square) - Quality measure elements
LITD 14
Others
339
IS 7785 : Part 5 : Sec 1 : 1981
Specification for elevated type aerodrome lighttNg fittings: Part 5 approach lighting fittings: Sec 1 high intensity elevated approach lighting fittings
ETD 49
Product Specification
340
IS 16445 : 2016
Software engineering - Software product quality requirements and evaluation (Square) - Data quality model
LITD 14
Others
341
IS 7785 : Part 6 : Sec 1 : 1981
Specification for elevated type aerodrome lighting fittings: Part 6 taxiway lights: Sec 1 low intensity omni - Directional elevated taxiway lighting fittings
ETD 49
Product Specification
342
IS 16419 : Part 1 : 2020
Information Technology — IT Asset Management Part 1 IT Asset Management Systems - Requirements ( First Revision )
LITD 14
1
System Standard
343
IS 13706 : Part 2 : 2016
Information technology - Open systems interconnection - Protocol specification for the association control service element: protocol implementation conformance statement (PICS) performa
LITD 14
Others
344
IS 14700 : Part 4 : Sec 13 : 2016
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 13 harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity test
LITD 9
Methods of tests
345
IS 14700 : Part 4 : Sec 6 : 2016
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 6 immunity to conducted disturbances, induced by radio - Frequency fields
LITD 9
Methods of tests
346
IS/IEC 62479 : 2010
Assessment of the Compliance of Low-Power Electronic and Electrical Equipment with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (10 MHz to 300 GHz)
LITD 9
Code of Practice
347
IS/IEC 62577 : 2009
Evaluation of Human Exposure to Electromagnetic Fields from a Stand-Alone Broadcast Transmitter ( 30 MHz - 40 GHz )
LITD 9
Code of Practice
348
IS/ISO/IEC 27037 : 2012
Information Technology - Security Techniques - Guidelines for Identification,Collection,Acquisition and Preservation of Digital Evidence
LITD 17
Code of Practice
349
IS 29109 : Part 2 : 2010
Information Technology - Conformance Testing Methodology for Biometric Data Interchange Formats Defined in ISO/IEC 19794 Part 2 Finger Minutiae Data
LITD 32
Methods of tests
350
IS/IEC 61124 : 2012
Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity
LITD 2
Methods of tests
351
IS/ISO/IEC 14496 : Part 6 : 2000
Information Technology - Coding of Audio-Visual Objects Part 6 Delivery Multimedia Integration Framework ( DMIF )
LITD 23
Others
352
IS 16464 : Part 4 : 2015
Information technology - Biometric application programming interface: Part 4 biometric sensor function provider interface
LITD 32
Others
353
IS 16464 : Part 2 : 2016
Information technology - Biometric application programming interface: Part 2 biometric archive function provider interface
LITD 32
Others
354
IS/ISO/IEC 14496 : Part 33 : 2019
Information Technology - Coding of Audio-Visual Objects Part 33 Internet Video Coding
LITD 23
Others
355
IS/ISO/IEC 9075 : Part 1 : 2016
Information Technology Database Language SQL Part 1 Framework ( SQL / Framework )
LITD 15
Others
356
IS 16350 : 2016
Enhanced inscript keyboard layouts
LITD 20
Code of Practice
357
IS 11075 : Part 1 : 1984
Specification for radio frequency connectors of BNC, TNC and UHF series: Part 1 test schedule and requirements
LITD 6
Methods of tests
358
IS 11075 : Part 2 : Sec 1 : 1984
Specification for radio frequency connectors of BNC, TNC and UHF series - Part 2: BNC series - Sec 1: straight plug, male, cabled, type xxxx IS - 01 - 01 to 04 and 50 to 53
LITD 6
Product Specification
359
IS 11075 : Part 2 : Sec 2 : 1985
Specification for radio frequency connectors of BNC, TNC and UHF series: Part 2 BNC series: Sec 2 cabled socket type 11075 IS - 02 - 01 to 02 and 50 to 51
LITD 6
Product Specification
360
IS 11075 : Part 2 : Sec 3 : 1985
Speciffcation for radio frequency connectors of BNC, TNC and UHF series: Part 2 BNC series: Sec 3 plug, right angle, cabled type 11075 IS - 03 - 01 to 02 and 50 to 51
LITD 6
Product Specification
361
IS 15077 : Part 1 : 2019
Semiconductor Optoelectronic Devices for Fibre Optic System Applications Part 1 Specification Template for Essential Ratings and Characteristics ( Second Revision )
LITD 11
2
Product Specification
362
IS/IEC/TR 62572 : Part 2 : 2008
Fibre Optic Active Components and Devices - Reliability Standards Part 2 Laser Module Degradation
LITD 11
Code of Practice
363
IS 16438 : Part 2 : Sec 1 : 2019
Fibre Optic Interconnecting Devices and Passive Components Performance Standard Part 2 Fibre Optic Connectors Terminated on Single-Mode Fibre for Category U Section 1 Uncontrolled environment
LITD 11
Code of Practice
364
IS 12380 : Part 1 : 1988
Specification for radio frequency connectors of n series: Part 1 test schedule and requirements
LITD 6
Methods of tests
365
IS 12419 : Part 1 : 1988
Specification for radio frequency connectors of SMA, SMB and SMC series: Part 1 test schedule and requirements
LITD 6
Methods of tests
366
IS/IEC 60793 : PART 1 : SEC 1 : 2017
Optical fibres: Part 1 measurement methods and test procedures: Sec 1 general and guidance (First Revision)
LITD 11
1
Methods of tests
367
IS/IEC 60794 : Part 3 : Sec 30 : 2018
Optical Fibre Cables Part 3 Outdoor Cables Section 30 Family specification for optical telecommunication cables for lakes, river crossings and coastal applications
LITD 11
Product Specification
368
IS 12448 : Part 2 : Sec 1 : 1988
Basic testing procedures and measuring methods for electrotechnical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 1 general examination
LITD 3
Methods of tests
369
IS 12448 : Part 5 : Sec 1 : 1989
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 1 impact tests (Free Components)
LITD 3
Methods of tests
370
IS 12448 : Part 5 : Sec 2 : 1989
Basic testing procedure and measuring methods for electromechanical components: Part 5 (Fixed For Electronic Equipment Impact Tests (Free Components), static load tests components), endurance tests and overload tests .: Sec 2 static load tests (Fixed Components)
LITD 3
Methods of tests
371
IS 12448 : Part 5 : Sec 3 : 1989
Basic testing measuring standard procedures and methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 3 endurance tests
LITD 3
Methods of tests
372
IS 12448 : Part 5 : Sec 4 : 1989
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 4 overload tests
LITD 3
Methods of tests
373
IS 12448 : Part 9 : 1992
Basic testing procedures and measuring methods for electromechanical components for electronic equipment:Part 9 Cable-clamping tests, explosion hazard tests,chemical resistance tests,fire hazard tests of
LITD 3
Methods of tests
374
IS 13984 : Part 1 : 1995
Link and Test Connectors:Part 1 Test Schedule and Requirements
LITD 3
Methods of tests
375
IS 13984 : Part 2 : Sec 1 : 1994
Link and test connectors specification: part 2 socket for conventional wiring: Sec 1 two - Way socket link and test connector
LITD 3
Methods of tests
376
IS 13984 : Part 2 : Sec 2 : 1994
Link and test connectors specification: Part 2 socket for conventiqnal wiring: Sec 2 three - Way socket link and test connector
LITD 3
Dimensions
377
IS 13984 : Part 2 : Sec 3 : 1994
Link and test connectors - Specification: Part 2 socket for conventional wiring: Sec 3 four - Way socket link and test connector
LITD 3
Dimensions
378
IS 13984 : Part 2 : Sec 4 : 1995
Link and test connectors - Specificaiton: Part 2 socket for conventional wiring: Sec 4 six - Way socket link and test connector
LITD 3
Dimensions
379
IS 13984 : Part 3 : Sec 1 : 1995
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 1 two - Way flat mounting socket link and test connector
LITD 3
Dimensions
380
IS 13984 : Part 3 : Sec 2 : 1995
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 2 two - Way upright mounting socket link and test connector
LITD 3
Dimensions
381
IS 13984 : Part 3 : Sec 3 : 1995
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 3 three - Way socket link and test connector
LITD 3
Dimensions
382
IS 13984 : Part 3 : Sec 4 : 1995
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 4 four - Way socket link and test connector
LITD 3
Dimensions
383
IS 13984 : Part 3 : Sec 5 : 1995
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 5 six - Way socket link and test connector
LITD 3
Dimensions
384
IS 13984 : Part 4 : Sec 1 : 1995
Ltnk and test connectors specification: Part 4 U - Link plug: Sec 1 U - Link polarized
LITD 3
Dimensions
385
IS 13984 : Part 4 : Sec 2 : 1995
LlNk and test connectors specification: Part 4 u - Link plug: Sec 2 u - Link non - Polarized
LITD 3
Dimensions
386
IS 13984 : Part 4 : Sec 3 : 1995
LlNk and test connectors specification: Part 4 u - Link plug: Sec 3 double u - Link plug polarized
LITD 3
Dimensions
387
IS 13984 : Part 5 : Sec 1 : 1995
Link and test connectors specification: Part 5 cord plug: Sec 1 polarized
LITD 3
Dimensions
388
IS/QC 960201 : Part 4 : Sec 1 : 2005
Electromechanical switches for use in electronic equipment: Part 4: Secal specification for lever (Toggle) switches: Sec 1 blank detail specification
LITD 3
Code of Practice
389
IS/ISO 17115 : 2007
Health informatics - Vocabulary for terminological systems
MHD 17
Terminology
390
IS/ISO 13606-3 : 2009
Health informatics - Electronic health record communication: Part 3 references archetypes and term lists
MHD 17
Others
391
IS/ISO 18308 : 2011
Health informatics - Requirements for an electronic health record architecture
MHD 17
Others
392
IS/IEC 62341 : Part 1 : Sec 2 : 2014
Organic Light Emitting Diode OLED displays- Part 1-2: Terminology and letter symbols
LITD 4
Terminology
393
IS/IEC 62341 : Part 6 : Sec 2 : 2015
Organic Light Emitting Diode OLED displays Part 6-2: Measuring methods of visual quality and ambient performance
LITD 4
Methods of tests
394
IS 8271 : Part 5 : Sec 15 : 1990
Quartz crystal units used for frequency control and selection - Specificaiton: Part 5 ser - Ies CX for oscillators: Sec 15 quartz crystal unit type CX - 15
LITD 24
Product Specification
395
IS 8872 : Part 1 : 2018
Potentiometers for use in electronic equipment: Part 1 generic specification (First Revision)
LITD 5
1
Methods of tests
396
IS 4493 : Part 4 : 1982
Specification for hollow metallic waveguides: Part 4 flat rigid rectangular waveguides
LITD 6
Others
397
IS 9256 : Part 1 : 2019
Fixed capacitors for use in electronic equipment: Part 1 Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (First Revision)
LITD 5
1
Product Specification
398
IS 9333 : 2009
Measuring Methods for Cylinder Cores, Tube Cores and Screw Cores of Magnetic Oxides
LITD 24
1
Code of Practice
399
IS 15034 : 2001
Manipulating industrial robots - Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accordance with is 14533:1998
PGD 18
Code of Practice
400
IS 9567 : 2001
Tin or tin - Lead coated copper wire - Specificaiton (First Revision)
LITD 6
1
Product Specification
401
IS 9817 : 1992
Sealing test for pressurized wave guide tubing and assemblies (First Revision)
LITD 6
1
Methods of tests
402
IS 15292 : 2003
Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (Gui - R)
PGD 18
Code of Practice
403
IS 9638 : Part 1 : 1980
Specification for fixed polyester film dielectric capacitors for direct current: Part 1 general requirements and methods of tests
LITD 5
Product Specification
404
IS 15866 : PART 1 : 2010
Fixed inductors for electromagnetic interference suppression: Part 1 generic specification
LITD 5
Product Specification
405
IS/IEC 60862 : PART 3 : 2003
Surface acoustic wave (SAW) filters of assessed quality: Part 3 standard outlines
LITD 24
Product Specification
406
IS/QC 300000 : 1988
Fixed capacitors for use in electronic equipment generic specification
LITD 5
Product Specification
407
IS/QC 300100 : 1988
Fixed capacitors for use in electronic equipment: Sectional specification: fixed polyethrsylene - Terephthalate film dielectric metal foil DC capacitor
LITD 5
Product Specification
408
IS/QC 300201 : 2000
Fixed capacitors for use in electronic equipment: Part 15 blank detail specification: fixed tantalum capacitors with solid electrolyte and porous anode assessment level E
LITD 5
Product Specification
409
IS/QC 300301 : 1993
Fixed capacitors for use in electronic equipment blank detail specification aluminium electrolytic capacitors with non - Solid electrolyte assessment level E
LITD 5
Product Specification
410
IS 13248 : 1992
Flexible waveguide assembly performance
LITD 6
Code of Practice
411
IS 13667 : 1993
Conductors for electronics and telecommunication applications: tinsel conductors - Specificaiton
LITD 6
Others
412
IS 14521 : 1998
PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination
LITD 6
Code of Practice
413
IS/ISO/IEC 10536 : Part 3 : 1996
Identification Cards - Contactless Integrated Circuit (s) Cards Part 3 Electronic Signals and Reset Procedures
LITD 16
Product Specification
414
IS/ISO/IEC 30105 : Part 3 : 2016
Information Technology - IT Enabled Services - Business Process Outsourcing ( ITES -BPO) Lifeycle Processes Part 3 Measurement Framework (MF) and Organization Maturity Model (OMM)
LITD 14
Others
415
IS/IEC 61196 : PART 1 : SEC 302 : 2005
Coaxial Communication Cables Part 1-302 Mechanical Test Methods - Test for Eccentricity
LITD 6
Methods of tests
416
IS/IEC 61196 : Part 1 : SEC 200 : 2005
Coaxial communication cables: Part 1 - 200 environmental test methods - General requirements
LITD 6
Methods of tests
417
IS/QC 001002 : PART 1 : 2000
IEC quality assessment system for electronic components (IECQ) - Rules of procedure: Part 1 administration (First Revision)
LITD 5
1
Code of Practice
418
IS/QC 001003 : 2000
IEC quality assessment system for electronic components (IECQ) - Guidance documents
LITD 5
1
Code of Practice
419
IS/QC 300600 : 1993
Fixed capacitors for use in electronic equipment - Sectional specification for fixed capacitors of ceramic dielectric, class 1
LITD 5
Product Specification
420
IS/QC 300700 : 1994
Fixed capacitors for use in electronic equipment: Sectional specification for fixed capacitors of ceramic dielectric, class 2
LITD 5
Product Specification
421
IS/QC 300800 : 1994
Fixed capacitors for use in electronic equipment: Sectional specification for fixed tantalum chip capacitors
LITD 5
Product Specification
422
IS/QC 301200 : 1993
Fixed capacitors for use in electronic equipment Sectional specification for fixed metallized polypropylene film dielectric D.C. capacitors
LITD 5
Product Specification
423
IS/QC 301201 : 1993
Fixed capacitors for use in electronic equipment - Blank detail specification for fixed metallized polypropylene film dielectric D. C. capacitors - Assessment level e
LITD 5
Product Specification
424
IS/QC 301301 : 1993
Fixed capacitors for use in electronic equipment, blank detail specification for fixed metallized polypropylene film dielectric A.C. and pulse capacitors,assessment level E
LITD 5
Product Specification
425
IS/QC 301800 : 2001
Fixed capacitors for use in electronic equipment: Part 13 Secal specification fixed polypropylene film dielectric metal foil D.C. capacitors: Sec one - General
LITD 5
Product Specification
426
IS/QC 300401 : 1988
Fixed capacitors for use in electronic equipment blank detail specification fixed metallized polyethylene - Terephthalate film dielectric D C capacitors assessment level e
LITD 5
Product Specification
427
IS/QC 300601 : 1993
Fixed capacitors for use in electronic equipment,blank detail specification for fixed capacitors of ceramic dielectric,class 1,assessment level E
LITD 5
Product Specification
428
IS 12736 : 1989
Printing specifications for optical character recognition
LITD 16
Code of Practice
429
IS 12755 : Part 1 : 1989
Alphanumeric character sets for optical recognition: Part 1 character set OCR - A - Shapes and dimensions of the printed image
LITD 16
Code of Practice
430
IS 12755 : Part 2 : 1989
Alphanumeric character sets for optical - Recognition: Part 2 character set OCR - B - Shapes and dimensions of the printed image
LITD 16
Code of Practice
431
IS/IEC 60793 : Part 1 : Sec 20 : 2014
Optical fibres: Part 1 measurement methods and test procedures: Sec 20 fibre geometry (First Revision)
LITD 11
1
Methods of tests
432
IS 16607 : 2018
Fibre Optics — Launch Condition Requirements for Measuring Multimode Attenuation
LITD 11
Code of Practice
433
IS 1885 : Part 47 : 1977
Electrotechnical vocabulary: Part 47 digital electronic equipment
LITD 8
Terminology
434
IS 1885 : Part 63 : 1985
Electrotechnical vocabulary: Part 63 nuclear instrumentation
LITD 8
Terminology
435
IS 3437 : 1972
General requirements for direct reading pointer indicator type electronic voltmeter (First Revision)
LITD 8
1
Product Specification
436
IS 3886 : 1966
Minimum requirements for general purpose audio frequency signal generators (30 C/s To 30 Kc/s)
LITD 8
Product Specification
437
IS/ISO/IEC 13170 : 2009
Information Technology- 120 mm ( 8,54 Gbytes per Side ) and 80 mm ( 2,66 Gbytes per Side ) DVD Re-recordable Disk for Dual Layer ( DVD-RW for DL )
LITD 36
Product Specification
438
IS 3915 : 1966
Methods of measurements on audio frequency signal generators (30 C/s To 30 Kc/s)
LITD 8
Methods of tests
439
IS/ISO/IEC 16963 : 2015
Information Technology- Digitally Recorded Media for Information Interchange and Storage - Test Method for the Estimation of Lifetime of Optical Disks for Long-Term Data Storage
LITD 36
Methods of tests
440
IS 4755 : 1987
Reference zero for the calibration of pure tone air conduction audiometers (First Revision)
LITD 8
1
Code of Practice
441
IS 6229 : 1980
Method for measurement of real - Ear protection of hearing protectors and physical attenuation of earmuffs (First Revision)
LITD 7
1
Methods of tests
442
IS/ISO/IEC 11770 : Part 6 : 2016
Information Technology - Security Techniques - Key Management Part 6 Key Derivation
LITD 17
Others
443
IS 6700 : 1972
Requirements for general purpose cathode - Ray oscilloscope
LITD 8
Product Specification
444
IS 16625 : Part 1 : 2018
Optical Circuit Boards Part 1 General
LITD 11
Product Specification
445
IS/QC 210000 : 1994
Connectors for Optical Fibres and Cables Generic Specification
LITD 11
Dimensions
446
IS/IEC 62538 : 2008
Categorization of Optical Devices
LITD 11
Terminology
447
IS/ISO 518 : 2006
Photography - Camera Accessory Shoes, with and without Electrical Contacts for Photoflash Lamps and Electronic Photoflash Units - Specification
MED 32
Dimensions
448
IS/ISO/IEC 30105 : Part 1 : 2016
Information Technology - IT Enabled Services - Business Process outsourcing (ITES-BPO) Lifecyle Processes Part 1 Process Reference Model (PRM)
LITD 14
Others
449
IS/ISO/IEC 30105 : Part 2 : 2016
Information Technology - IT Enabled Serives - Business Process Outsouring (ITES - BPO) Lifecyle Process Part 2 Process Assessment Model (PAM)
LITD 14
Others
450
IS 13252 : Part 22 : 2019
Information technology equipment - Safety: Part 22 equipment to be installed outdoors (First Revision)
LITD 7
1
Product Specification
451
IS 13252 : Part 23 : 2014
Information technology equipment - Safety: Part 23 large data storage equipment
LITD 7
Product Specification
452
IS 14202 : Part 12 : 2014
Identification cards - Integrated circuit cards: Part 12 cards with contacts - Usb electrical interface and operating procedures
LITD 16
Product Specification
453
IS/QC 300801 : 1993
Fixed capacitors for use in electronic equipment blank detail specification for fixed tantalum chip capacitors assessment level E
LITD 5
Product Specification
454
IS/QC 301801 : 2001
Fixed capacitors for use in electronic equipment: Part 13 blank detail specification fixed polypropylene film dielectric metal foil D.C. capacitors assessment level E
LITD 5
Product Specification
455
IS/QC 400400 : 1994
Fixed resistors for use in electronic equipment - Sectional specification for fixed resistor networks with individually measurable resistors
LITD 5
Product Specification
456
IS/QC 400200 : 1992
Fixed resistors for use in electronic equipment: Sectional specification: fixed power resistors
LITD 5
Product Specification
457
IS/QC 400501 : 1994
Fixed resistors for use in electronic equipment - Blank detail specification for fixed resistors networks in which not all resistors are individually measurable - Assessment level E
LITD 5
Product Specification
458
IS/QC 410101 : 1992
Potentiometers for Use in Electronic Equipment Blank Detail Specification: Lead-Screw Actuated and Rotary Preset Potentiometers Assessment Level E
LITD 5
Product Specification
459
IS/QC 420000 : 1994
Varistors for use in electronic equipment - Generic specification
LITD 5
Product Specification
460
IS/QC 790202 : 1993
Semiconductor devices - Integrated circuits - Analogue integrated circuits blank detail specification for monolithic integrated operational amplifiers
LITD 5
Product Specification
461
IS/QC 760201 : 1995
Semiconductor devices - Integrated circuits - Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures
LITD 5
Product Specification
462
IS/QC 420102 : 1993
Varistors for use in electronic equipment - Blank detail specification for zinc oxide surge suppression varistors - AsiEssment level E
LITD 5
Product Specification
463
IS/QC 760200 : 1995
Semiconductor devices - Integrated circuits - SectlOnal specification for film integrated circuits and hybrid film integrated circuits on the basis of the capablity approval procedures
LITD 5
Product Specification
464
IS/QC 790130 : 1995
Semiconductor devices - Integrated circuits - Digital integrated circuits - Blank detail specification for HCMOS digital integrated circuits (Series 54/74 HC, 54/74 HCT, 54/74 HCU)
LITD 5
Product Specification
465
IS/QC 790132 : 1995
Semiconductor devices - Integrated circuits - Digital integrated circuits - Blank detail specification for bipolar monolithic digital integrated circuit gates (Excluding Uncommitted Logic Arrays)
LITD 5
Product Specification
466
IS/QC 400401 : 1994
Fixed resistors for use in electronic equipment - Blank detail specification - Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation assessment level E
LITD 5
Product Specification
467
IS/QC 400500 : 1993
Fixed resistors for use in electronic equipment - Sectional specification for fixed resistor networks in which not all resistors are individually measurable
LITD 5
Product Specification
468
IS/QC 400601 : 1993
Fixed resistors for use in electronic equipment blank detail specification for fixed chip resistors assessment level E
LITD 5
Product Specification
469
IS/QC 440000 : 1994
Directly heated positive step function temperature coefficient thermistors - Generic specification
LITD 5
Product Specification
470
IS/QC 790131 : 1995
Semiconductor devices - Integrated circuits - Digital integrated circuits - Blank detail specification for complementary MOS digital integrated circuits (Series 4000 Band 4000 Ub)
LITD 5
Product Specification
471
IS/QC 760101 : 1995
Semiconductor devices - Integrated circuits - Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of qualification approval procedure
LITD 5
Product Specification
472
IS/QC 400600 : 1994
Fixed resistors for use in electronic equipment: Sectional specification for fixed chip resistors
LITD 5
Product Specification
473
IS/QC 420100 : 1994
Varistors for use in electronic equipment. -Sectional specification for surge suppression varistors
LITD 5
Product Specification
474
IS/QC 410100 : 1992
Potentiometers for use in electronic equipment Sectional specification lead - Screw actuated and rotary preset potentiometers
LITD 5
Product Specification
475
IS/QC 760000 : 1994
Semiconductor devices - Integrated circuits - Generic specification for film integrated circuits and hybrid film integrated circuits
LITD 5
Product Specification
476
IS/QC 760100 : 1995
Semiconductor devices - Integrated circuits - Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of qualification approval procedure
LITD 5
Product Specification
477
IS/QC 440001 : 1993
Directly heated positive step function temperature coefficient thermistors - Blank detail specification - Assessment level E
LITD 5
Product Specification
478
IS 4330 : 1967
Methods of measurements on cathode - Ray oscilloscope (DC To 10 Mc/s)
LITD 8
Methods of tests
479
IS 6767 : Part 1 : 1972
Specification for direct reading pointer indicator type AC/DC electronic voltmeter: Part 1 methods of measurements
LITD 8
Methods of tests
480
IS 6767 : Part 3 : 1972
Specification for direct reading pointer indicator type AC/DC electronic voltmeter: Part 3 up to 300 MHz
LITD 8
Product Specification
481
IS 6769 : Part 1 : 1972
Specification for direct reading pointer indicator type ac electronic millivoltmeter: Part 1 methods of measurements
LITD 8
Methods of tests
482
IS 6769 : Part 2 : 1972
Specification for direct reading pointer indicator type ac electronic millivoltmeter: Part 2 with a frequency range of 2 Hz to 1 MHz
LITD 8
Product Specification
483
IS 7194 : 2018
Acoustics - Estimation of noise Induced hearing loss (Second Revision)
LITD 7
2
Methods of tests
484
IS 7709 : 1975
Specification for standard hydrophone
LITD 7
Product Specification
485
IS 8146 : 1976
Method of measurement of reverberation time in auditoria
LITD 7
Methods of tests
486
IS 8290 : 1976
Specification for general purpose audio frequency output power meters
LITD 8
Product Specification
487
IS 8573 : 1977
Specification for digital electronic DC voltmeters and dc electronic analogue - To - Digital converters
LITD 8
Product Specification
488
IS 9176 : 2018
Electrical and electronic measurement equipment - Expression of performance (Second Revision)
LITD 8
2
Code of Practice
489
IS 9177 : 1979
Method for specifying the functional performance of stabilized power supply apparatus
LITD 8
Code of Practice
490
IS 9281 : Part 1 : 1979
Specification for electronic weighing systems: Part 1 terms and definitions
LITD 8
Terminology
491
IS 9281 : Part 2 : 1979
Specification for electronic weighing systems: Part 2 methods of measurements
LITD 8
Methods of tests
492
IS 9281 : Part 4 : 1983
Specification for electronic weighing systems: Part 4 code of practice for use and installation
LITD 8
Code of Practice
493
IS 9285 : Part 1 : 1979
Specification for direct reading pointer indicator type AC electronic RF millivoltmeter: Part 1 methods of measurements
LITD 8
Methods of tests
494
IS 9285 : Part 2 : 1979
Specification for direct reading pointer indicator type AC electronic RF millioltmeter: Part 2 requirements
LITD 8
Product Specification
495
IS 9711 : 1980
Specification for synchronizing pulse generator
LITD 8
Product Specification
496
IS 9741 : Part 1 : 1981
Specification for video test signal generator: Part 1 methods of measurements
LITD 8
Methods of tests
497
IS 9989 : 1981
Assessment of noise with respect to community response
LITD 7
Code of Practice
498
IS 10211 : Part 1 : 1982
Specification for standard signal generator in the frequency range 30 MHz to 500 MHz: Part 1 methods of measurements
LITD 8
Methods of tests
499
IS 10211 : Part 2 : 1982
Specification for standard signal generator in the frequency range 30 MHz to 500 MHz: Part 2 performance requirements
LITD 8
Product Specification
500
IS 10656 : 1983
Specification for insulation resistance tester (Electronic Type)
LITD 8
Product Specification
501
IS/ISO/IEC 20000 : PART 1 : 2018
Information Technology - Service Management Part 1 Service Management System Requirements ( Second Revision )
LITD 14
2
System Standard
502
IS 11018 : Part 1 : 1984
Expression of the properties of cathode - Ray oscilloscopes: Part 1 general
LITD 8
Code of Practice
503
IS/ISO/IEC 20000 : PART 2 : 2019
Information technology - Service management - Part 2: Guidance on the application of service management systems (Second Revision)
LITD 14
2
Terminology
504
IS 11018 : Part 2 : 1984
Expression of the properties of cathode - Ray oscilloscopes: Part 2 storage oscilloscopes
LITD 8
Terminology
505
IS 11424 : 2018
Nuclear instrumentation - Portable gamma radiation meters and spectrometers used for prospecting - Definitions, requirements and calibration (First Revision)
LITD 8
1
Methods of tests
506
IS 6964 : 2018
Electroacoustics - Octave - Band and fractional octave band filters - Specificaitons (Second Revision)
LITD 7
2
Product Specification
507
IS/IEC 62368 : Part 1 : 2018
Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision )
LITD 7
1
Safety Standard
508
IS 8225 : 2018
Acoustics - Measurement of sound absorption in a reverberation room (Second Revision)
LITD 7
2
Methods of tests
509
IS 16124 : 2020
Systems and Software Engineering - Software Life Cycle Processes ( First Revision )
LITD 14
1
System Standard
510
IS/ISO/IEC 90003 : 2018
Software engineering Guidelines for the application of ISO 9001:2008 to computer software
LITD 14
2
System Standard
511
IS 11547 : Part 1 : 1985
Specification for electronic weighing - In - Motion systems: Part 1 terminology and design rules
PGD 26
Terminology
512
IS 11547 : Part 2 : 1985
Specification for electronic weighing - In - Motion systems: Part 2 requirements
PGD 26
Product Specification
513
IS 11547 : Part 3 : Sec 1 : 1985
Specification for electronic - Weighing - In - Motion system: Part 3 methods of tests: Sec 1 simulated tests
PGD 26
Methods of tests
514
IS 11547 : Part 3 : Sec 2 : 1985
Specification for electronic weighing - In - Motion systems: Part 3 methods of tests: Sec 2 site tests
PGD 26
Methods of tests
515
IS 11868 : 2018
Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (First Revision)
LITD 8
1
Methods of tests
516
IS 12737 : 1988
Standard test procedures for semiconductor X - Ray energy spectrometers
LITD 8
Methods of tests
517
IS 12857 : 1989
General principles for the creation of graphical symbols for use on equipment
LITD 8
Code of Practice
518
IS 12126 : 1987
Specification for hand held metal detectors (Frisking) for use in weapon detection
LITD 26
Code of Practice
519
IS 12705 : 1989
Expression of performanceof air qualityinfra - Red,analyzers
LITD 8
Code of Practice
520
IS 13109 : Part 2 : 1991
Specification for electronic equipment/systems for use in coal and metal liferrous mines: Part 2 requirements for automatic telephone systems
LITD 8
Product Specification
521
IS 13109 : Part 3 : 1999
Specification for electronic equipment/systems for use in coal and metalliferous mines: Part 3 requirements for battery powered amplifier telephone systems
LITD 8
Product Specification
522
IS 13109 : Part 4 : 1991
Specification for electronic equipment/systems fo ruse in coal and metalliferrousmines: Part 4 requirements for sound powered magneto telephone systems
LITD 8
Product Specification
523
IS 13109 : Part 7 : 1991
Specification for electronic equipment/systems for use in coal and metalliferrous mines: Part 7 requirements for cage communication systems
LITD 8
Product Specification
524
IS 13109 : Part 9 : 2000
Specification for electronic equipment/systems for use in coal and metalliferous mines: Part 9 requirements for insulation resistance testers
LITD 8
Product Specification
525
IS 13875 : Part 1 : 1993
Digital measuring instruments for measurement and control: Part 1 general specifications concerning terms Tests and data sheet details
LITD 8
Terminology
526
IS 13875 : Part 2 : 1993
Digital measurement instruments for measurement and control: Part 2 terms test and data sheet details of instruments for measuring analog quantities
LITD 8
Terminology
527
IS 13875 : Part 3 : 1993
Digital measuring instruments for measurement and control: Part 3 terms, tests and data sheet details of instruments for measuring digital quantities
LITD 8
Terminology
528
IS 14501 : Part 2 : 1998
Pulse techniques and apparatus: Part 2 pulse measurement and analysis, general considerations
LITD 8
Methods of tests
529
IS 14527 : 1998
Expression of performance of pulse generators
LITD 8
Code of Practice
530
IS 13109 : Part 8 : 1999
Specification for electronic equipment/systems for use in coal and metalliferous mines: Part 8 requirements for radio paging systems
LITD 8
Product Specification
531
IS 13109 : Part 11 : 2000
Specification for electronic equipment/ systems for use in coal and metalliferous mines: Part 11 requirements for goaf temperature monitoring systems
LITD 8
Product Specification
532
IS 13109 : Part 21 : 1991
Specification for electronic equipment/systems for use in coal - and metalliferrousmines: Part 21 requirements for mine environmental telemonitoring systems
LITD 8
Product Specification
533
IS 11889 : 2018
Simultaneous interpreting - Permanent booths - Requirements (First Revision)
LITD 7
1
Product Specification
534
IS/IEC 60118 : Part 0 : 2015
Electroacoustics Hearing Aids Part 0 Measurement of the Performance Characteristics of Hearing Aids
LITD 7
Methods of tests
535
IS 13792 : 2018
Information technology - Programming languages - Ada (First Revision)
LITD 15
1
Code of Practice
536
IS 14639 : 2021
Software engineering Systems and software Quality Requirements and Evaluation SQuaRE Requirements for quality of Ready to Use Software Product RUSP and instructions for Testing First Revision
LITD 14
1
Process Specification
537
IS 13987 : Part 2 : 2018
Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band: Part 2 mechanical and environmental tests on ind4idual and collect4e receiving antennas (First Revision)
LITD 7
1
Methods of tests
538
IS 12373 : Part 3 : 2018
Information technology - Open systems interconnection - Basic reference model: Part 3 naming and addressing (First Revision)
LITD 14
1
Others
539
IS 13394 : 2021
Systems and software engineering Requirements for designers and developers of user documentation(First Revision)
LITD 14
1
Others
540
IS 13615 : 2020
Information Technology - Open Systems Interconnection - Service Definition for the Application Service Object Association Control Service Element ( First Revision )
LITD 14
1
Terminology
541
IS 13672 : 2018
Information technology - Open systems interconnection - Application layer structure (First Revision)
LITD 14
1
Others
542
IS 13675 : Part 1 : Sec 1 : 2023
Information Technology Remote Operations Part 1 Section 1 Concepts Model and Notation
LITD 14
1
Terminology
543
IS 13706 : 2020
Information Technology - Open Systems Interconnection - Connection-mode Protocol for the Application Service Object Association Control Service Element ( First Revision )
LITD 14
1
Others
544
IS 16845 : 2019
Systems and software engineering - Systems and software quality requirements and evaluation (Square) - Guide to square
LITD 14
Code of Practice
545
IS/IEC 80000-13 : 2008
Quantities and units: Part 13 information science and technology
PGD 1
Terminology
546
IS/ISO/IEC 19794 : Part 7 : 2014
Information Technology - biometric Data interchange formats part 7 Signature/Sign Time Series Data
LITD 32
Others
547
IS/IEC 60812 : 2018
Failure Modes and Effects Analysis ( FMEA and FMECA )
LITD 2
Code of Practice
548
IS 11770 : Part 2 : 2006
Recommendations for control of emission of asbestos dust in premises manufacturing products contaning asbestos: Part 2 friction materials (First Revision)
CED 53
1
Others
549
IS/ISO/IEC 29187 : Part 1 : 2013
Information Technology — Identification of Privacy Protection Requirements Pertaining to Learning, Education and Training ( LET ) Part 1 Framework and Reference Model
LITD 19
Code of Practice
550
IS 16242 : Part 1 : 2014
Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS
ETD 31
Product Specification
551
IS 16148 : 2014
Metal halide lamps - Performance specification
ETD 23
Product Specification
552
IS 16166 : 2014
Sample preparation for measurement of mercury level in fluorescent lamps
ETD 23
Others
553
IS 11713 : Part 3 : 1986
Guide for physical planning of computer complexes: Part 3 Security considerations
LITD 31
Code of Practice
554
IS/IEC 60068 : Part 2 : Sec 69 : 2017
Solid biofuels - Determination of fines content in samples of pellets
LITD 5
Methods of tests
555
IS/ISO/IEC 10373 : Part 1 : 2020
Cards and security devices for personal identification Test methods Part 1: General characteristics
LITD 16
1
Product Specification
556
IS 15934 : Part 3 : 2022
LIQUID CRYSTAL DISPLAY DEVICES PART 3: LIQUID CRYSTAL DISPLAY LCD CELLS SECTIONAL SPECIFICATION
LITD 4
1
System Standard
557
IS 17428 : Part 1 : 2020
Data Privacy Assurance Part 1 Engineering and Management Requirements
LITD 17
Others
558
IS/ISO/IEC/IEEE 8802 : Part 1X : 2013
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Part 1X: Port-based Network Access Control
LITD 28
Code of Practice
559
IS 16197 : Part 3 : Sec 2 : 2023
Determination of certain substances in electrotechnical products Part 3 Screening Section 2 Fluorine Bromine and Chlorine in Polymer and Electronics by Combustion � Ion Chromatography C-IC ( First Revision )
ETD 43
1
Others
560
IS/IEC 60793 : Part 2 : Sec 60 : 2008
Optical fibres: Part 2 product specifications: Sec 60: Secal specification for category c single - Mode intraconnection fibres
LITD 11
Product Specification
561
IS/ISO/IEC 27033 : Part 3 : 2010
Information technology - Security techniques - Network: Security: Part 3 reference networking scenarios - Threats, design techniques and control issues
LITD 17
Others
562
IS/ISO/IEC/TS 30103 : 2015
Software and Systems Engineering - Lifecycle Processes - Framework for Product Quality Achievement
LITD 14
Others
563
IS/ISO/IEC 11770 : Part 1 : 2010
Information technology - Security techniques - Key management: Part 1 framework
LITD 17
Others
564
IS/ISO/IEC 14888 : Part 3 : 2018
IT Security Techniques — Digital Signatures with Appendix Part 3 Discrete Logarithm Based Mechanisms ( First Revision )
LITD 17
1
Others
565
IS/ISO/IEC 27033 : Part 4 : 2014
Information technology - Security techniques - Network: Security: Part 4 Securing communications between networks using: Security gateways
LITD 17
Others
566
IS/ISO/IEC 30105 : Part 4 : 2016
Information Technology - IT Enabled Serives - Business Process Outsouring (ITES-BPO) Lifecyle Processes Part 4 Terms and Concepts
LITD 14
Terminology
567
IS/IEC/TS 61850 : Part 2 : 2019
Communication Networks and Systems in substations Part 2 Glossary
LITD 10
1
Terminology
568
IS 16577 : 2016
Dc power supply for notebook computers
LITD 7
Product Specification
569
IS/IEC 60695 : Part 1 : Sec 40 : 2013
Fire Hazard Testing Part 1 Guidance for assessing the fire hazard of electro technical products Section 40 Insulating Liquids
LITD 1
Code of Practice
570
IS/IEC 60721 : Part 2 : Sec 4 : 2018
Classification of Environmental Conditions Part 2 Environmental Conditions appearing in nature Section 4 Solar Radiation and Temperature
LITD 1
Code of Practice
571
IS/IEC 61850 : Part 4 : 2020
COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION Part 4: System and project management
LITD 10
1
Code of Practice
572
IS 13109 : Part 12 : 2014
Electronic equipment/systems for use in coal and metalliferous mines - Specificaiton: Part 12 requirements for cable fault locators
LITD 8
Product Specification
573
IS 14700 : Part 4 : Sec 34 : 2017
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 34 voltage dips, short interruptions and voltage variations immunity tests for current more than 16 A per phase
LITD 9
Methods of tests
574
IS 16528 : 2017
Determination of RF field strength and SAR in the vicinity of Radiocommunication base stations for the purpose of evaluating human exposure
LITD 9
Methods of tests
575
IS/IEC 61968 : Part 3 : 2021
Application integration at electric utilities System interfaces for distribution management Part 3: Interface for network operations
LITD 10
1
Code of Practice
576
IS 10680 : Part 1 : 2016
Information Technology - Programming Languages - Fortran Part 1 Base Language (First Revision)
LITD 15
1
Code of Practice
577
IS 10680 : Part 2 : 2016
Information technology - Programming languages - Fortran: Part 2 varying length character strings (First Revision)
LITD 15
Code of Practice
578
IS/ISO/IEC 11770-4 : 2017
Information technology - Security techniques - Key management: Part 4 mechanisms based on weak: Secrets (First Revision)
LITD 17
1
Others
579
IS/ISO/IEC 19794 : Part 14 : 2013
Information technology - Biometric data interchange formats: Part 14 dna data
LITD 32
Others
580
IS/ISO/IEC 27011 : 2016
Information Technology — Security Techniques — Code of Practice for Information Security Controls Based on ISO/IEC 27002 for Telecommunications Organizations ( First Revision )
LITD 17
1
Code of Practice
581
IS/ISO/IEC 19794 : Part 2 : 2011
Information Technology - Biometric Data Interchange Formats Part 2 Finger Minutiae Data
LITD 32
Others
582
IS/ISO/IEC 27036 : Part 3 : 2013
Information technology - Security techniques - Information Security for supplier relationships: Part 3 guidelines for information and communication technology supply chain: Security
LITD 17
Others
583
IS/ISO/IEC 29109 : Part 5 : 2019
Information Technology — Conformance Testing Methodology for Biometric Data Interchange Formats Defined in ISO / IEC 19794 Part 5 Face Image Data ( First Revision )
LITD 32
1
Methods of tests
584
IS/ISO/IEC 29109 : Part 7 : 2011
Information Technology - Conformance Testing Methodology for Biometric Data Interchange Formats Defined in ISO/IEC 19794 Part 7 Signature/Sign Time Series Data
LITD 32
Methods of tests
585
IS/ISO/IEC TR 29163 : Part 2 : 2009
Information Technology — Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition Part 2 Content Aggregation Model Version 1.1
LITD 19
Code of Practice
586
IS/ISO/IEC/TR 29163 : Part 3 : 2009
Information Technology Sharable Content Object Reference Model ( SCORM® ) 2004 3rd Edition Part 3 Run-Time Environment Version 1.1
LITD 19
Code of Practice
587
IS/ISO 29990 : 2010
Learning services for non - Formal education and training - Basic requirements for service providers
LITD 19
Service Specification
588
IS/ISO/IEC 14496 : Part 22 : 2019
Information technology - Coding of audio - Visual objects: Part 22 open font format
LITD 23
1
Others
589
IS/ISO 15529 : 2010
Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
PGD 39
Code of Practice
590
IS 16506 : Part 1 : 2016
Optics and photonics - Optical coatings: Part 1 definitions
PGD 39
Terminology
591
IS/IEC 61010 : Part 2-081 : 2009
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-081 Particular Requirements for Automatic and Semi-automatic Laboratory Equipment for Analysis and Other Purposes
MHD 19
Safety Standard
592
IS/ISO/IEC 30105 : Part 5 : 2016
Information Technology - IT Enabled Services Business Process Outsourcing (ITES - BPO) Lifecycle Processes Part 5 Guidelines
LITD 14
Code of Practice
593
IS/ISO/IEC 18014 : Part 3 : 2009
Information technology - Security techniques - Time - Stamping services: Part 3 mechanisms producing linked tokens
LITD 17
Others
594
IS/IEC 61968 : Part 4 : 2019
Application integration at electric utilities System Interfaces for distribution management Part 4: Interfaces for records and asset management
LITD 10
1
Code of Practice
595
IS 15934 : Part 5 : Sec 3 : 2017
Liquid crystal display devices: Part 5 environmental, endurance and mechanical test methods: Sec 3 glass strength and reliability
LITD 4
Methods of tests
596
IS 10322 : Part 5 : Sec 7 : 2017
Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)
ETD 49
1
Product Specification
597
IS 616 : 2017
Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)
LITD 7
5
Product Specification
598
IS/ISO/IEC/TR 22678 : 2020
Treated Wastewater Reuse for Irrigation Guidelines for the Adaptation of Irrigation Systems and Practices to Treated Wastewater
SSD 10
Service Specification
599
IS/ISO 18906 : 2000
Imaging Materials - Photographic Films - Specifications for Safety Film
MED 32
Safety Standard
600
IS/ISO 1793 : 2005
Cinematography-Reels for 16 mm Motion-picture Projectors (Up tp and Including 610 m capacity: 38 cm size)-Dimensions
MED 32
Dimensions
601
IS/ISO 8622 : 1998
Cinematography - Magnetic Sound Records on 70 mm Motion-Pictures Releases Prints with Magnetic Stripes - A-Chain Reproduction Characteristics
MED 32
Dimensions
602
IS/ISO/IEC 11770 : Part 2 : 2018
IT Security Techniques — Key Management Part 2 Mechanisms Using Symmetric Techniques ( First Revision )
LITD 17
1
Others
603
IS 11770 : Part 3 : 1987
Recommendations For Control Of Emission Of Asbestos Dust In Premises Manufacturing Products Containing Asbestos: Part 3 Non-cement Asbestos Products Other Than Friction Materials
CED 53
Others
604
IS 14888 : 2000
VSWR meter - Performance requirements
LITD 8
Product Specification
605
IS 15596 : Part 7 : 2016
Sound system equipment: Part 7 headphones and earphones (First Revision)
LITD 7
1
Product Specification
606
IS/ISO 1230 : 2007
Photography - Determination of Flash Guide Numbers for Electronic Flash Equipment
MED 32
Methods of tests
607
IS/ISO/IEC 27006 : 2015
Information technology - Security techniques - Requirements for bodies providing audit and Certification of Information Security Management systems (First Revision)
LITD 17
1
System Standard
608
IS/ISO 9336 : Part 1 : 2010
Optics and Photonics - Optional Transfer Function - Application Part 1 Interchangeable Lenses for 35 mm Still Cameras
MED 32
Dimensions
609
IS 16102 : Part 2 : 2017
Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)
ETD 23
1
Product Specification
610
IS 16695 : Part 1 : 2022
SCOSTA: Smart Card Operating System Template Architecture Part 1 Basic Command Set
LITD 16
1
Product Specification
611
IS 11770 : Part 1 : 1987
Recommendations for control of emission of asbestos dust in premises manufacturing products containing asbestos: Part 1 asbestos cement products
CED 53
Others
612
IS 16580 : Part 1 : 2017
Battery charging interface for small handheld multimedia devices: Part 1 2mm barrel interface
LITD 7
Product Specification
613
IS 13397 : 2018
Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current (less then) 75 A per phase (First Revision)
LITD 9
1
Dimensions
614
IS 14700 : Part 4 : Sec 4 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 4 electrical fast transient / burst immunity test (Second Revision)
LITD 9
2
Dimensions
615
IS 14700 : Part 4 : Sec 15 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 15 flickermeter - Functional and design specifications (Second Revision)
LITD 9
1
Methods of tests
616
IS 5001 : 2018
Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of discrete devices (First Revision)
LITD 5
Code of Practice
617
IS 7305 : 2018
Fixed capacitors for use in electronic equipment - Generic specification (Second Revision)
LITD 5
2
Product Specification
618
IS 14700 : Part 3 : Sec 3 : 2018
Electromagnetic compatibility (EMC): Part 3 limits section 3 limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply system, for equipment with rated current ? 16 a per phase and not subjected to conditional connection (Second Revision)
LITD 9
2
System Standard
619
IS 14700 : Part 4 : Sec 2 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 2 electrostatic discharge immunity test (Second Revision)
LITD 9
2
Methods of tests
620
IS 14700 : Part 4 : Sec 8 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 8 power frequency magnetic field immunity test (Second Revision)
LITD 9
2
Methods of tests
621
IS 14700 : Part 4 : Sec 25 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 25 HEMP immunity test methods for equipment and systems
LITD 9
Methods of tests
622
IS 14700 : Part 4 : Sec 14 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 14 voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
LITD 9
Methods of tests
623
IS 14700 : Part 4 : Sec 32 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 32 high - Altitude electromagnetic pulse (HEMP) simulator compendium
LITD 9
Methods of tests
624
IS 13611 : Part 5 : 2017
Information technology - Protocol for providing the connectionlessMode network service: provision of the underlying service by ISDN circuit - Switched B - Channels
LITD 13
Code of Practice
625
IS 13611 : Part 4 : 2017
Information technology - Protocol for providing the connectionless Mode network service provision of the underlying service by a subnetwork that provides the OSI data link service
LITD 13
Code of Practice
626
IS 13611 : Part 3 : 2017
Information technology - Protocol for providing the connectionless Mode network service provision of the underlying service by an x.25 subnetwork
LITD 13
Code of Practice
627
IS 13611 : Part 2 : 2017
Information technolgy - Protocol for providing the connectionless - Mode network service: Part 2 provision of the underlying service by an ISO/IEC 8802 subnetwork
LITD 13
Code of Practice
628
IS 16958 : 2018
Obsolescence management - Application guide
LITD 2
Code of Practice
629
IS 16957 : 2018
Hazard and operability studies (Hazop Studies) - Application guide
LITD 2
Code of Practice
630
IS 14700 : Part 4 : Sec 33 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 33 measurement methods for high - Power transient parameters
LITD 9
Methods of tests
631
IS 8161 : Part 2 : 2018
Equipment reliability testing: Part 2 design of test cycles (First Revision)
LITD 2
1
Code of Practice
632
IS 14700 : Part 6 : Sec 3 : 2023
Electromagnetic compatibility EMC Part 6 Generic standards Section 3 Emission standard for equipment in residential environments Second Revision
LITD 9
2
Product Specification
633
IS/ISO/IEC 27033 : Part 5 : 2013
Information technology - Security techniques - Network Security: Part 5 Securing communications across networks using virtual pr4ate networks (VPNs)
LITD 17
Others
634
IS/IEC 61746 : Part 2 : 2010
Calibration of optical time-domain reflectometers (OTDR) Part 2 OTDR for multimode fibres
LITD 11
Methods of tests
635
IS/ISO/IEC 18031 : 2011
Information technology - Security techniques - Random bit generation
LITD 17
Others
636
IS/ISO/IEC 27033 : Part 2 : 2012
Information technology - Security techniques: Part 2 guidelines for the design and implementation of network: Security
LITD 17
Others
637
IS/ISO/IEC 27034 : Part 1 : 2011
Information technology - Security techniques - Application Security: Part 1 overview and concepts
LITD 17
Others
638
IS 10052 : Part 1 : Sec 4 : 2024
Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 4 Antennas and Test Sites for Radiated Disturbance Measurements
LITD 9
1
Product Specification
639
IS 14700 : Part 4 : Sec 24 : 2018
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 24 test methods for protective devices for HEMP conducted disturbance (First Revision)
LITD 9
Methods of tests
640
IS/ISO/IEC 19794 : Part 8 : 2011
Information technology - Biometric data interchange formats: Part 8 finger pattern skeletal data
LITD 32
Others
641
IS 10052 : Part 2 : Sec 1 : 2018
Specification for radio disturbance and immunity measuring apparatus and methods: Part 2 methods of measurement of disturbances and immunity: Sec 1 conducted disturbance measurements (Second Revision)
LITD 9
Product Specification
642
IS 13736 : Part 2 : Sec 2 : 2018
Classification of environmental conditions: Part 2 environmental conditions appearing in nature: Sec 2 precipitation and wind (First Revision)
LITD 1
1
Code of Practice
643
IS/IEC 60876 : Part 1 : 2014
Fibre optic interconnecting devices and pass4e components - Fibre optic spatial switches: Part 1 generic specification (First Revision)
LITD 11
1
Product Specification
644
IS 15116 : 2018
Information technology - Security techniques - Modes of operation for an n - Bit block cipher (Second Revision)
LITD 17
2
Others
645
IS 16744 : Part 1 : 2018
Information technology - Home electronic system (Hes) gateway: Part 1 A residential gateway model for hes
LITD 13
Code of Practice
646
IS 16744 : Part 2 : 2018
Information technology - Home electronic system (HES) gateway: Part 2 modularity and protocol
LITD 13
Code of Practice
647
IS 12373 : Part 1 : 2018
Information technology - Open systems interconnection - Basic reference model: Part 1 the basic model (First Revision)
LITD 14
1
Others
648
IS/ISO/IEC 29109 : Part 4 : 2010
Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794: Part 4 finger image data
LITD 32
Methods of tests
649
IS/ISO/IEC 13252 : 1999
Information technology - Enhanced communications transport service definition
LITD 13
Code of Practice
650
IS 14147 : Part 7 : 2021
Identification Cards Recording Technique Part 7 Magnetic Stripe High Coercivity High Density
LITD 16
2
Product Specification
651
IS 11419 : 2018
Information technology - File structure and labelling of magnetic tapes for information interchange (Second Revision)
LITD 36
2
Others
652
IS 15474 : Part 3 : Sec 1 : 2018
Dependability management: Part 3 application guide: Sec 1 analysis techniques for dependability - Guide on methodology
LITD 2
Methods of tests
653
IS/ISO/IEC 20000 : Part 3 : 2019
Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISOIEC 20000-1 (First Revision)
LITD 14
1
Code of Practice
654
IS/ISO 25 : 1994
Cinematography - Camera Usage of 16 mm Motion-Pictures Film - Specifications
MED 32
Methods of tests
655
IS/ISO 517 : 2008
Photography - Apertures and Related Properties Pertaining to Photographic Lenses - Designations and Measurements
MED 32
Dimensions
656
IS/ISO 516 : 1999
Photography - Camera Shutters - Timing
MED 32
Methods of tests
657
IS/ISO 1222 : 2010
Photography — Tripod Connections
MED 32
Dimensions
658
IS/IEC 60695 : Part 10 : Sec 2 : 2014
Fire hazard testing: Part 10 Abnormal heat: Sec 2 ball pressure test method
LITD 1
Methods of tests
659
IS/IEC 60695 : Part 11 : Sec 10 : 2013
Fire hazard testing: Part 11 test flames :: Sec 10 50 w horizontal and vertical flame test methods
LITD 1
Methods of tests
660
IS/ISO/IEC/TR 15446 : 2017
Information technology - Security techniques - Guidance for the production of protection profiles and Security targets
LITD 17
Others
661
IS/ISO/IEC 18033 : Part 4 : 2011
Information technology - Security techniques - encryption algorithms: Part 4 stream ciphers
LITD 17
Others
662
IS/ISO/IEC 18033 : Part 5 : 2015
Information technology - Security techniques - Encryption algorithms: Part 5 identity - Based ciphers
LITD 17
Others
663
IS/ISO/IEC 27033 : Part 6 : 2016
Information technology - Security techniques - Network Security: Part 6 Securing wireless IP network access
LITD 17
Others
664
IS/ISO/IEC 27007 : 2020
Information security cybersecurity and privacy protection Guidelines for information security management systems auditing
LITD 17
1
Others
665
IS/ISO/IEC 19778 : Part 1 : 2015
Information technology — Learning, education and training — Collaborative technology: Part 1 Collaborative workplace data model
LITD 19
Code of Practice
666
IS/ISO/IEC 19778 : Part 2 : 2015
Information Technology — Learning, Education and Training — Collaborative Technology — Collaborative Workplace Part 2 Collaborative Environment Data Model
LITD 19
Code of Practice
667
IS 16939 : 2018
Optical Fibre Cables for Inside Premises ( FTTx ) Application
LITD 11
Product Specification
668
IS/ISO/IEC 20016 : Part 1 : 2014
Information Technology for Learning, Education and Training — Languages Accessibility and Human Interface Equivalencies (HIEs) in e-Learning Applications Part 1 Framework and Reference Model for Semantic Interoperability
LITD 19
Code of Practice
669
IS/ISO/IEC/TR 20748 : Part 1 : 2016
Information Technology for Learning, Education and Training — Learning Analytics Interoperability Part 1 Reference Model
LITD 19
Code of Practice
670
IS/ISO/IEC/TR 20748 : Part 2 : 2017
Information Technology for Learning, Education and Training — Learning Analytics Interoperability Part 2 System Requirements
LITD 19
Code of Practice
671
IS/ISO/IEC 21778 : 2017
Information Technology The JSON Data Interchange Syntax
LITD 15
Code of Practice
672
IS/ISO/IEC/TS 30135 : Part 7 : 2014
Information Technology — Digital Publishing — EPUB 3 Part 7 EPUB 3 Fixed-Layout Documents
LITD 15
Others
673
IS/ISO/IEC 5218 : 2004
Information Technology Codes for the Representation of Human Sexes
LITD 15
Others
674
IS/ISO/IEC 9075 : Part 13 : 2016
Information Technology Database Languages SQL Part 13 SQL Routines and Types Using the JavaTM Programming Language ( SQL / JRT )
LITD 15
Others
675
IS/ISO/IEC 9075 : Part 14 : 2016
Information Technology Database Languages SQL Part 14 XML Related Specifications ( SQL / XML )
LITD 15
Others
676
IS/ISO/IEC 9579 : 2000
Information Technology Remote Database Access for SQL with Security Enhancement
LITD 15
Others
677
IS 17192 : Part 1 : 2019
Robotics — Performance Criteria and Related Test Methods for Service Robots Part 1 Locomotion for Wheeled Robots
PGD 18
Methods of tests
678
IS/ISO/IEC/TS 30135 : Part 1 : 2014
Information Technology — Digital Publishing — EPUB 3 Part 1 EPUB 3 Overview
LITD 15
Others
679
IS/ISO/IEC/TS 30135 : Part 3 : 2014
Information Technology — Digital Publishing — EPUB 3 Part 3 Content Documents
LITD 15
Others
680
IS/ISO/IEC/TS 30135 : Part 4 : 2014
Information Technology — Digital Publishing — EPUB 3 Part 4 Open Container Format
LITD 15
Others
681
IS/ISO/IEC/TS 30135 : Part 5 : 2014
Information Technology — Digital Publishing — EPUB 3 Part 5 Media Overlay
LITD 15
Others
682
IS/ISO/IEC/TS 30135 : Part 6 : 2014
Information Technology — Digital Publishing — EPUB 3 Part 6 EPUB Canonical Fragment Identifier
LITD 15
Others
683
IS/CISPR 32 : 2015
Electromagnetic Compatibility of Multimedia Equipment Emission Requirements
LITD 9
Safety Standard
684
IS/ISO/IEC 27010 : 2015
Information Technology - Security Techniques - Information Security Management for Inter-Sector and Inter-Organizational Communications
LITD 17
Others
685
IS/ISO/IEC 27018 : 2019
Information Technology — Security Techniques — Code of Practice for Protection of Personally Identifiable Information ( PII ) in Public Clouds Acting as PII Processors ( First Revision )
LITD 17
1
Others
686
IS/ISO/IEC/TS 27008 : 2019
Information Technology — Security Techniques — Guidelines for the Assessment of Information Security Controls ( First Revision )
LITD 17
1
Others
687
IS/ISO/IEC 27040 : 2015
Information Technology - Security Techniques - Storage Security
LITD 17
Others
688
IS/ISO/IEC 27017 : 2015
Information Technology - Security Techniques - Code of Practice for Information Security Controls Based on ISO/IEC 27002 for Cloud Services
LITD 17
System Standard
689
IS/ISO/IEC 29192 : Part 1 : 2012
Information Technology - Security Techniques - Lightweight Crytography Part 1 General
LITD 17
Others
690
IS/ISO/IEC 29192 : Part 2 : 2019
Information security Lightweight cryptography Part 2: Block ciphers First Revision
LITD 17
1
Others
691
IS/ISO/IEC 29192 : Part 3 : 2012
Information Technology - Security Techniques - Lightweight Cryptography Part 3 Stream Ciphers
LITD 17
Others
692
IS/ISO/IEC 29192 : Part 4 : 2013
Information Technology - Security Techniques - Lightweight Cryptography Part 4 Mechanisms Using Asymmetric Techniques
LITD 17
Others
693
IS/ISO/IEC 15946 : Part 1 : 2016
Information Technology - Security Techniques - Cryptographic Techniques Based on Elliptic Curves Part 1 General
LITD 17
Others
694
IS/ISO/IEC 18033 : Part 2 : 2006
Information Technology - Security Techniques - Encryption Algorithms Part 2 Asymmetric Ciphers
LITD 17
Others
695
IS/ISO/IEC 18033 : Part 3 : 2010
Information Technology-Security Techniques - Encryption Algorithms Part 3 Block Ciphers
LITD 17
Others
696
IS 16628 : 2018
Information Technology - Open Systems Interconnection - Network Layer Security Protocol
LITD 13
Code of Practice
697
IS/ISO/IEC 9899 : 2018
Information Technology — Programming Languages — C
LITD 15
Code of Practice
698
IS/ISO/IEC 11179 : Part 1 : 2015
Information Technology — Metadata Registries ( MDR ) Part 1 Framework
LITD 15
Others
699
IS/ISO/IEC 11179 : Part 5 : 2015
Information Technology — Metadata Registries ( MDR ) Part 5 Naming and Identification Principles
LITD 15
Others
700
IS/ISO/IEC 11179 : Part 6 : 2015
Information Technology — Metadata Registries ( MDR ) Part 6 Registration
LITD 15
Others
701
IS/ISO/IEC/TR 14496 : Part 24 : 2008
Information Technology - Coding of Audio-visual Objects Part 24 Audio and Systems Interaction
LITD 23
Others
702
IS/ISO/IEC 14496 : Part 25 : 2011
Information Technology - Coding of Audio-visual Objects Part 25 3D Graphics Compression Model
LITD 23
Others
703
IS/ISO/IEC/TS 30135 : Part 2 : 2014
Information Technology — Digital Publishing — EPUB 3 Part 2 Publications
LITD 15
Others
704
IS/ISO/IEC 11179 : Part 3 : 2013
Information Technology — Metadata Registries ( MDR ) Part 3 Registry Metamodel and Basic Attributes
LITD 15
Others
705
IS/ISO/IEC 14496 : Part 1 : 2010
Information Technology - Coding of Audio-Visual Objects Part 1 Systems
LITD 23
Others
706
IS/ISO/IEC 14496 : Part 8 : 2004
Information Technology - Coding of Audo-Visual Objects Part 8 Carriage of ISO / IEC 14496 Contents over IP Networks
LITD 23
Others
707
IS/ISO/IEC/TR 14496 : Part 9 : 2009
Information Technology - Coding of Audio-Visual Objects Part 9 Reference Hardware Description
LITD 23
Others
708
IS/ISO/IEC 14496 : Part 10 : 2014
Information Technology - Coding of Audio-Visual Objects Part 10 Advanced Video Coding
LITD 23
Others
709
IS/ISO/IEC 14496 : Part 12 : 2015
Information Technology - Coding of Audio-Visual Objects Part 12 ISO Base Media File Format
LITD 23
Others
710
IS/ISO/IEC 14496 : Part 14 : 2020
INFORMATION TECHNOLOGY CODING OF AUDIO-VISUAL OBJECTS PART 14 MP4 FILE FORMAT (First Revision)
LITD 23
1
Others
711
IS/ISO/IEC 14496 : Part 15 : 2019
INFORMATION TECHNOLOGY CODING OF AUDIO-VISUAL OBJECTS PART 15 CARRIAGE OF NETWORK ABSTRACTION LAYER NAL UNIT STRUCTURED VIDEO IN THE ISO BASE MEDIA FILE FORMAT first revision
LITD 23
1
Others
712
IS/ISO/IEC 14496 : Part 17 : 2006
Information Technology - Coding of Audio-visual Objects Part 17 Streaming Text Format
LITD 23
Others
713
IS/ISO/IEC 14496 : Part 18 : 2004
Information Technology - Coding of Audio-Visual Objects Part 18 Font Compression and Streaming
LITD 23
Others
714
IS/ISO/IEC 14496 : Part 20 : 2008
Information Technology - Coding of Audio-Visual Objects Part 20 Lightweight Application Scene Representation ( LASeR ) and Simple Aggregation Format ( SAF )
LITD 23
Others
715
IS/ISO/IEC 14496 : Part 13 : 2004
Information Technology - Coding of Audio-Visual Objects Part 13 Intellectual Property Management and Protection ( IPMP ) Extensions
LITD 23
Others
716
IS/IEC 60605 : Part 6 : 2007
Equipment Reliability Testing Part 6 Tests for the Validity and Estimation of the Constant Failure Rate and Constant Failure Intensity
LITD 2
Methods of tests
717
IS/ISO/IEC/TR 14496 : Part 7 : 2004
Information Technology - Coding of Audio-Visual Objects Part 7 Optimized Reference Software for Coding of Audio-Visual Objects
LITD 23
Others
718
IS/ISO/IEC 14496 : Part 11 : 2015
Information Technology - Coding of Audio-Visual Objects Part 11 Scene Description and Application Engine
LITD 23
Others
719
IS/ISO/IEC 14496 : Part 19 : 2004
Information Technology - Coding of Audio-Visual Objects Part 19 Synthesized Texture Stream
LITD 23
Others
720
IS/ISO/IEC 14496 : Part 23 : 2008
Information Technology - Coding of Audio-Visual Objects Part 23 Symbolic Music Representation
LITD 23
Others
721
IS/ISO/IEC/TR 22417 : 2017
Information Technology Internet of Things ( IOT ) IOT Use Cases
LITD 27
Code of Practice
722
IS/IEC 60839 : Part 11 : Sec 1 : 2013
Alarm and Electronic Security Systems Part 11 Electronic Access Control Systems Section 1 System and components requirements
LITD 26
Code of Practice
723
IS/IEC 60839 : Part 11 : Sec 2 : 2014
Alarm and Electronic Security Systems Part 11 Electronic Access Control System Section 2 Application guidelines
LITD 26
Code of Practice
724
IS/ISO/IEC 14496 : Part 21 : 2006
Information Technology - Coding of Audio-Visual Objects Part 21 MPEG-J Graphics Framework eXtensions ( GFX )
LITD 23
Others
725
IS/ISO/IEC 14496 : Part 28 : 2012
Information Technology - Coding of Audio-Visual Objects Part 28 Composite Font Representation
LITD 23
Others
726
IS/ISO/IEC 14496 : Part 29 : 2015
Information Technology - Coding of Audio-Visual Objects Part 29 Web Video Coding
LITD 23
Others
727
IS/IEC 62642 : Part 1 : 2010
Alarm Systems — Intrusion and Hold-up Systems Part 1 System Requirements
LITD 26
Code of Practice
728
IS/IEC 62642 : Part 3 : 2010
Alarm Systems — Intrusion and Hold-up Systems Part 3 Control and Indicating Equipment
LITD 26
Code of Practice
729
IS/IEC 62820 : Part 1 : Sec 1 : 2016
Building Intercom Systems Part 1 System Requirements Section 1 General
LITD 26
Code of Practice
730
IS 16046 : Part 1 : 2018
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )
ETD 11
Product Specification
731
IS 16046 : Part 2 : 2018
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )
ETD 11
Product Specification
732
IS 16047 : Part 3 : 2018
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )
ETD 11
Product Specification
733
IS 16614 : Part 1 : 2018
Double- Capped LED Linear Lamps Part1 Safety Specification
ETD 23
Product Specification
734
IS/ISO/IEC 14496 : Part 26 : 2010
Information Technology - Coding of Audio-Visual Objects Part 26 Audio Conformance
LITD 23
Others
735
IS/ISO/IEC 14496 : Part 27 : 2009
Information Technology - Coding of Audio-Visual Objects Part 27 3D Graphics Conformance
LITD 23
Others
736
IS 16464 : Part 1 : 2019
Information Technology - Biometric Application Programming Interface Part 1 BioAPI Specification
LITD 32
Others
737
IS/ISO/IEC 19794 : Part 13 : 2018
Information Technology - Biometric Data Interchange Formats Part 13 Voice Data
LITD 32
Others
738
IS/ISO/IEC 19896 : Part 1 : 2018
IT Security Techniques - Competence Requirements for Information Security Testers and Evaluators Part 1 Introduction, Concepts and General Requirements
LITD 17
Others
739
IS/ISO/IEC 27019 : 2017
Information Technology - Security Techniques - Information Security Controls for the Energy Utility Industry
LITD 17
Others
740
IS/ISO/IEC 27036 : Part 4 : 2016
Information Technology - Security Techniques - Information Security for Supplier Relationships Part 4 Guidelines for Security of Cloud Services
LITD 17
Others
741
IS/ISO/IEC 29192 : Part 5 : 2016
Information Technology - Security Techniques - Lightweight Cryptography Part 5 Hash-Functions
LITD 17
Others
742
IS/ISO/IEC 14496 : Part 2 : 2004
Information Technology - Coding of Audio-Visual Objects Part 2 Visual
LITD 23
Others
743
IS/ISO/IEC 14496 : Part 4 : 2004
Information Technology - Coding of Audio-Visual Objects Part 4 Conformance Testing
LITD 23
Others
744
IS/ISO/IEC 14496 : Part 5 : 2001
Information Technology - Coding of Audio-Visual Objects Part 5 Reference Software
LITD 23
Others
745
IS/ISO/IEC 19896 : Part 2 : 2018
IT Security Techniques - Competence Requirements for Information Security Testers and Evaluators Part 2 Knowledge, Skills and Effectiveness Requirements for ISO / IEC 19790 Testers
LITD 17
Others
746
IS/ISO/IEC 19896 : Part 3 : 2018
IT Security Techniques - Competence Requirements for Information Security Testers and Evaluators Part 3 Knowledge, Skills and Effectiveness Requirements for ISO/IEC 15408 Evaluators
LITD 17
Others
747
IS/ISO/IEC 19794 : Part 5 : 2011
Information Technology - Biometric Data Interchange Formats Part 5 Face Image Data
LITD 32
Others
748
IS/ISO/IEC 19794 : Part 6 : 2011
Information Technology - Biometric Data Interchange Formats Part 6 Iris Image Data
LITD 32
Others
749
IS/ISO/IEC 14496 : Part 3 : 2019
Information technology Coding of audio-visual objects Part 3: Audio First Revision
LITD 23
1
Others
750
IS/ISO/IEC 14496 : Part 16 : 2011
Information Technology Coding of Audio-Visual Objects Part 16 Animation Framework eXtension ( AFX )
LITD 23
Others
751
IS/ISO/IEC 14496 : Part 30 : 2018
Information Technology - Coding of Audio-Visual Objects Part 30 Timed Text and Other Visual Overlays in ISO Base Media File Format
LITD 23
Others
752
IS/ISO/IEC 30134 : Part 1 : 2016
Information Technology Data Centers Key Performance Indicators Part 1 Overview and General Requirements
LITD 31
Product Specification
753
IS/ISO/IEC 30134 : Part 2 : 2016
Information Technology Data Centres Key Performance Indicators Part 2 Power Usage Effectiveness ( PUE )
LITD 31
Others
754
IS/ISO/IEC 30134 : Part 3 : 2016
Information Technology Data Centres Key Performance Indicators Part 3 Renewable Energy Factor ( REF )
LITD 31
Others
755
IS/ISO/IEC 30134 : Part 4 : 2017
Information Technology Data Centres Key Performance Indicators Part 4 IT Equipment Energy Efficiency for Servers ( ITEEsv )
LITD 31
Others
756
IS/ISO/IEC 30134 : Part 5 : 2017
Information Technology Data Centres Key Performance Indicators Part 5 IT Equipment Utilization for Servers ( ITEUsv )
LITD 31
Others
757
IS 14493 : Part 2 : 2018
Multicore and Symmetrical Pair / Quad Cables for Digital Communications Part 2 Symmetrical Pair / Quad Cables with Transmission Characteristics up to 100 MHz Horizontal Floor Wiring Sectional Specification
LITD 6
Methods of tests
758
IS 14686 : Part 3 : 2018
Radio Frequency and Coaxial Cable Assemblies Part 3 Sectional Specification for Semi-Flexible Coaxial Cable Assemblies
LITD 6
Methods of tests
759
IS/IEC 61196 : Part 6 : 2009
Coaxial Communication Cables Part 6 Sectional Specification for CATV Drop Cables
LITD 6
Methods of tests
760
IS/IEC 60194 : 2015
Printed Board Design Manufacture and Assembly-Terms and Definitions
LITD 5
Terminology
761
IS/IEC 62326 : Part 1 : 2002
Printed Boards Part 1 Generic specification
LITD 5
Product Specification
762
IS/IEC 62326 : Part 20 : 2016
Printed Boards Part 20 Printed Circuit Boards for High-Brightness LEDs
LITD 5
Product Specification
763
IS/IEC 62421 : 2007
Electronics Assembly Technology-Electronic Modules
LITD 5
Code of Practice
764
IS 15474 : Part 3 : Sec 10 : 2018
Dependability Management Part 3 Application Guide Section 10 Maintainability
LITD 2
Code of Practice
765
IS 15474 : Part 3 : Sec 2 : 2018
Dependability Management Part 3 Application Guide Selection 2 Collection of Depedability Data from the Field
LITD 2
Code of Practice
766
IS/IEC 60706 : Part 5 : 2007
Maintainability of Equipment Part 5 Testability and Diagnostic Testing
LITD 2
Methods of tests
767
IS/IEC 60706 : Part 3 : 2006
Maintainability of Equipment Part 3 Verification and Collection, Analysis and Presentation of Data
LITD 2
System Standard
768
IS/ISO/IEC 19778 : Part 3 : 2015
Information Technology — Learning, Education and Training — Collaborative Technology — Collaborative Workplace Part 3 Collaborative Group Data Model
LITD 19
Code of Practice
769
IS/ISO/IEC 10373 : Part 6 : 2016
Identification Cards — Test Methods Part 6 Proximity Cards
LITD 16
Methods of tests
770
IS/ISO/IEC 10536 : Part 2 : 1995
Identification Cards - Contactless Integated Circuit (s) Cards Part 2 Dimensions and Location of Coupling Areas
LITD 16
Product Specification
771
IS/IEC/TS 61970 : Part 2 : 2004
Energy Management System Application Programme Interface (EMS-API) Part 2 Glossary
LITD 10
Code of Practice
772
IS 16910 : Part 1 : Sec 2 : 2018
Video Surveillance Systems for Use in Security Applications Part 1 system Requirements Section 2 Performance Requirements for Video Transmission
LITD 26
System Standard
773
IS 16910 : Part 1 : Sec 1 : 2018
Video Surveillance Systems for Use in Security Applications Part 1 System Requirements Section 1 General
LITD 26
Code of Practice
774
IS 16910 : Part 2 : Sec 1 : 2018
Video Surveillance Systems for Use in Security Applications Part 2 Video Transmission Protocols Section 1 General requirements
LITD 26
System Standard
775
IS 16910 : Part 2 : Sec 2 : 2018
Video Surveillance Systems for Use in Security Applications Part 2 Video Transmission Protocols Section 2 IP interoperability implementation based on HTTP and REST services
LITD 26
Code of Practice
776
IS 16910 : Part 3 : 2018
Video Surveillance Systems for Use in Security Applications Part 3 Analog and Digital Video Interfaces
LITD 26
System Standard
777
IS 16910 : Part 4 : 2018
Video Surveillance Systems for Use in Security Applications Part 4 Application Guidelines
LITD 26
System Standard
778
IS/ISO 15531 : Part 1 : 2004
Industrial Automation Systems and Integration- Industrial Manufacturing Management Data Part 1 General Overview
PGD 18
Terminology
779
IS 15934 : Part 3 : Sec 1 : 2021
Liquid Crystal Display Devices Part 3 Liquid Crystal Display LCD Cells Section 1 Blank Detail Specification
LITD 4
1
System Standard
780
IS 15934 : Part 4 : 2021
Liquid Crystal and Solid State Display Devices Part 4 Liquid Crystal Display Modules and Cells Essential Ratings and Characteristics
LITD 4
1
Product Specification
781
IS 15934 : Part 4 : Sec 1 : 2021
Liquid Crystal Display Devices Part 4 Matrix Colour LCD Modules Section 1 Essential ratings and characteristics
LITD 4
1
Product Specification
782
IS 15934 : Part 6 : 2014
Liquid Crystal and Solid State Display Devices Part 6 Measuring Methods for Liquid Crystal Modules — Transmissive Type
LITD 4
Methods of tests
783
IS 16333 : Part 1 : 2015
Mobile Phone Handsets Part 1 Safety Requirements
LITD 13
Product Specification
784
IS 15474 : Part 3 : Sec 11 : 2014
Dependability Management Part 3 Application Guide Section 11 Reliability Centred Maintenance
LITD 2
Code of Practice
785
IS/ISO/IEC 19794 : Part 1 : 2011
Information Technology - biometric Data interchange formats part 1 Framework
LITD 32
Others
786
IS/ISO/IEC 29109 : Part 6 : 2011
Information Technology - Conformance Testing Methodology for Biometric Data Interchange Formats Defined in ISO/IEC 19794 Part 6 Iris Image Data
LITD 32
Methods of tests
787
IS/ISO/IEC 29109 : Part 10 : 2010
Information Technology - Conformance Testing Methodology for Biometric Data Interchange Formats Defined in ISO/IEC 19794 Part 10 Hand Geometry Silhouette Data
LITD 32
Methods of tests
788
IS/ISO/IEC 18014 : Part 1 : 2008
Information Technology- Security Techniques- Time Stamping Services Part 1 Framework
LITD 17
Others
789
IS/ISO/IEC 18014 : Part 4 : 2015
Information Technology - Security Techniques - Time-Stamping Services Part 4 Traceability of Time Sources
LITD 17
Others
790
IS/ISO/IEC 19794 : Part 9 : 2011
Information Technology - biometric Data interchange formats part 9 vascular image Data
LITD 32
Others
791
IS/ISO/IEC 29142 : Part 1 : 2013
Information Technology - Print Cartridge Characterization Part 1 General: Terms, Symbols, Notations and Cartridge Characterization Framework
LITD 36
Product Specification
792
IS/ISO/IEC 29142 : Part 2 : 2013
Information Technology - Print Cartridge Characterization Part 2 Cartridge Characterization Data Reporting
LITD 36
Product Specification
793
IS 18003 : Part 1 : 2020
Unified Data Exchange Part 1 Architecture
LITD 28
Code of Practice
794
IS 16107 : Part 2 : Sec 2 : 2017
Luminaries Performance Part 2 Particular Requirements Section 2 LED Street Lighting Luminarie
ETD 23
Product Specification
795
IS/IEC 62623 : 2012
Desktop and Notebook Computers - Measurement of Energy Consumption
LITD 7
Methods of tests
796
IS/ISO/IEC 29142 : Part 3 : 2013
Information Technology - Print Cartridge Characterization Part 3 Environment
LITD 36
Product Specification
797
IS/ISO/IEC 20546 : 2019
Information Technology - Big Data - Overview and Vocabulary
LITD 30
Terminology
798
IS/ISO/IEC 18004 : 2015
Information technology Automatic identification and data capture techniques QR Code bar code symbology specification
LITD 16
Product Specification
799
IS/ISO/IEC 30130 : 2016
Software engineering Capabilities of software testing tools
LITD 14
Methods of tests
800
IS 16910 : Part 5 : 2020
Video Surveillance Systems for Use in Security Applications Part 5 Data Specifications and Image Quality Performance for Camera Devices
LITD 26
Product Specification
801
IS/IEC 61025 : 2006
Fault Tree Analysis ( FTA )
LITD 2
Code of Practice
802
IS 802.15.9 : 2021
Recommended Practice for Transport of Key Management Protocol KMP Datagrams
LITD 28
Code of Practice
803
IS/ISO/IEC/IEEE 8802 : Part 11 : 2018
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 11: Wireless Lan Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications
LITD 28
Code of Practice
804
IS/IEC 60958 : Part 4 : Sec 1 : 2016
Digital Audio Interface Part 4 Professional Applications Section 1 Audio content
LITD 7
Others
805
IS 1885 : Part 192 : 2021
Electrotechnical Vocabulary Part 192 Dependability (Superseding IS 1885 Part 39 :1999 )
LITD 2
Terminology
806
IS 15474 : Part 3 : Sec 3 : 2021
Dependability management Part 3 Application guide Section 3 Life cycle costing Superseding IS 15474 :2004
LITD 2
Code of Practice
807
IS 17548 : 2021
Software and Systems Engineering – Core Agile Practices
LITD 14
Others
808
IS/ISO/IEC 2382 : 2015
Information Technology- Vocabulary ( First Revision )
LITD 15
Terminology
809
IS 18002 : Part 1 : 2021
Unified Digital Infrastructure - Data Layer Part 1 Reference Architecture
LITD 28
Code of Practice
810
IS 18008 : Part 1 : 2021
Smart Cities- GIS Reference Architecture
LITD 28
Code of Practice
811
IS 18006 : Part 3 : Sec 1 : 2021
Municipal Governance - Part 3 Property Tax - Section 1 Taxonomy
LITD 28
Terminology
812
IS 18004 : Part 1 : 2021
IoT System Part 1 Reference Architecture
LITD 28
Code of Practice
813
IS/IEC 62087 : Part 1 : 2015
Audio video and related equipment Determination of power consumption Part 1 General
LITD 7
Methods of tests
814
IS/IEC 62087 : Part 3 : 2015
Audio video and related equipment Determination of power consumption Part 3: Television sets
LITD 7
Methods of tests
815
IS/ISO 18295 : Part 1 : 2017
Customer Contact Centres - Part 1 : Requirements for Customer Contact Centres
SSD 10
Service Specification
816
IS/ISO/IEC 20547 : Part 3 : 2020
Information technology Big data reference architecture Part 3: Reference architecture
LITD 30
Others
817
IS/IEC 62341 : Part 5 : Sec 2 : 2019
Organic light emitting diode OLED displays Part 5-2: Mechanical endurance test methods
LITD 4
Methods of tests
818
IS/IEC 62341 : Part 5 : Sec 3 : 2019
Organic light emitting diode OLED displays Part 5-3: Measuring methods of image sticking and lifetime
LITD 4
Methods of tests
819
IS/IEC 62341 : Part 6 : Sec 1 : 2017
Plugs and Socket-Outlets for Household and Similar Purposes of Rated Voltage up to and Including 250 V and Rated Current up to and Including 16 A - Specification ( Fourth Revision )
LITD 4
Methods of tests
820
IS/IEC 62341 : Part 6 : Sec 3 : 2017
Organic light emitting diode OLED displays Part 6-3: Measuring methods of image quality
LITD 4
Methods of tests
821
IS/ISO/IEC 19792 : 2009
Information Technology Security techniques Security evaluation of biometrics
LITD 17
Others
822
IS/IEC 62341 : Part 6 : Sec 4 : 2017
Organic light emitting diode OLED displays - Part 6-4: Measuring methods of transparent properties
LITD 4
Methods of tests
823
IS/IEC 62351 : Part 8 : 2020
Power systems management and associated information exchange Data and communications security Part 8: Role-based access control for power system management
LITD 10
Code of Practice
824
IS/IEC/TR 62351 : Part 10 : 2012
Power systems management and associated information exchange - Data and communications security Part 10: Security architecture guidelines
LITD 10
Code of Practice
825
IS/IEC/TS 60839 : Part 7 : Sec 8 : 2019
ALARM SYSTEMS PART 7-8: Message Formats and Protocols for serial data interfaces in alarm transmission systems Requirements for common protocol for alarm transmission using the Internet protocol
LITD 26
Code of Practice
826
IS/IEC/TR 62351 : Part 90 : Sec 2 : 2018
Power systems management and associated information exchange Data and communications security Part 90-2: Deep packet inspection of encrypted communications
LITD 10
Code of Practice
827
IS/IEC/TS 62351 : Part 100 : Sec 1 : 2018
Power systems management and associated information exchange Data and communications security Part 100-1: Conformance test cases for IEC TS 62351-5 and IEC TS 60870-5-7
LITD 10
Code of Practice
828
IS/IEC/TS 62351 : Part 100 : Sec 3 : 2020
Power systems management and associated information exchange Data and communications security Part 100-3: Conformance test cases for IEC 62351-3 the secure communication extension for profiles including TCPIP
LITD 10
Code of Practice
829
IS/CISPR 35 : 2016
Electromagnetic Compatibility of Multimedia Equipment Immunity Requirements
LITD 9
Product Specification
830
IS/ISO/IEC 29192 : Part 6 : 2019
Information technology Lightweight cryptography Part 6: Message authentication codes MACs
LITD 17
Others
831
IS/IEC 62351 : Part 11 : 2016
Power systems management and associated information exchange Data and communications security Part 11: Security for XML documents
LITD 10
Code of Practice
832
IS/ISO/IEC 20543 : 2019
Information technology Security techniques Test and analysis methods for random bit generators within ISOIEC 19790 and ISOIEC 15408
LITD 17
Methods of tests
833
IS/ISO/IEC 24761 : 2019
Information technology Security techniques Authentication context for biometrics
LITD 17
Others
834
IS/ISO/IEC/TR 27550 : 2019
Information technology Security techniques Privacy engineering for system life cycle processes
LITD 17
Others
835
IS/ISO/IEC 29184 : 2020
Information technology Online privacy notices and consent
LITD 17
Process Specification
836
IS/IEC/TR 62351 : Part 12 : 2016
Power systems management and associated information exchange Data and communications security Part 12: Resilience and security recommendations for power systems with distributed energy resources DER cyber-physical systems
LITD 10
Code of Practice
837
IS/ISO/IEC 29192 : Part 7 : 2019
Information security Lightweight cryptography Part 7: Broadcast authentication protocols
LITD 17
Others
838
IS/IEC/TS 60870 : Part 5 : Sec 7 : 2013
Telecontrol equipment and systems Part 5-7: Transmission protocols Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols applying IEC 62351
LITD 10
Code of Practice
839
IS/IEC 60721 : Part 2 : Sec 7 : 2018
Classification of Environmental Conditions Part 2 Environmental Conditions appearing in nature Section 7 Flora and Fauna
LITD 1
Code of Practice
840
IS/IEC 60721 : Part 3 : Sec 0 : 2020
Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 0 Introduction
LITD 1
Code of Practice
841
IS/IEC 60721 : Part 3 : Sec 2 : 2018
Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 1 Transportation and Handling
LITD 1
Code of Practice
842
IS/IEC 60721 : Part 3 : Sec 4 : 2019
Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 4 Stationary use at non- weatherprotected locations
LITD 1
Code of Practice
843
IS/IEC 60721 : Part 3 : Sec 5 : 1997
Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 5 Ground Vehicle Installations
LITD 1
Code of Practice
844
IS/IEC 60721 : Part 3 : Sec 7 : 2002
Photovoltaic System - Design Qualification of Solar Trackers
LITD 1
Code of Practice
845
IS/IEC 60721 : Part 3 : Sec 1 : 2018
Medical Textiles - First Aid Dressings - Specification (first revision)
LITD 1
Code of Practice
846
IS 14172 : 2021
Identification Cards Physical Characteristics
LITD 16
1
Product Specification
847
IS 16910 : Part 2 : Sec 31 : 2020
Video Surveillance Systems for Use in Security Applications Part 2 Video Transmission Protocols Section 31 Live streaming and control based on web services
LITD 26
Code of Practice
848
IS 16910 : Part 2 : Sec 32 : 2020
Video Surveillance Systems for Use in Security Applications Part 2 Video Transmission Protocols Section 32 Recording control and replay based on web services
LITD 26
Code of Practice
849
IS/IEC/TR 62351 : Part 90 : Sec 1 : 2018
Power systems management and associated information exchange -Data and communications security Part 90-1: Guidelines for handling role-based access control in power systems
LITD 10
Code of Practice
850
IS/IEC 61196 : Part 1 : Sec 324 : 2006
Coaxial communication cables Part 1-324 Mechanical Test Methods — Test for Abrasion Resistance of Cable
LITD 6
Methods of tests
851
IS/ISO/IEC 19795 : Part 4 : 2008
Concrete Structures for Retaining Aqueous Liquids - Code of Practice: Part 4 Design Tables: Section 2 Rectangular tanks (First Revision)
LITD 32
Methods of tests
852
IS/ISO/IEC 39794 : Part 5 : 2019
Information technology Extensible biometric data interchange formats Part 5: Face image data
LITD 32
Others
853
IS/IEC 61744 : 2005
Hard coal and coke - Mechanical sampling : Part 5 coke - Sampling from moving streams (First Revision)
LITD 11
Methods of tests
854
IS 17627 : 2021
Linguistic Resources - POS Tag Set for Indian Languages Guidelines for designing Tagsets and Specification
LITD 20
Code of Practice
855
IS/ISO/IEC 19795 : Part 6 : 2012
Information Technology - Biometric performance testing and reporting - part 6: Testing methodologies for operational evaluation
LITD 32
Methods of tests
856
IS/ISO/IEC/IEEE 42030 : 2019
Software systems and enterprise Architecture evaluation framework
LITD 14
Methods of tests
857
IS 17743 : Part 1 : 2021
Systems and software engineering Lifecycle profiles for Very Small Entities VSEs Part 1: Overview
LITD 14
Others
858
IS/ISO/IEC 30107 : Part 2 : 2017
Information technology Biometric presentation attack detection Part 2: Data formats
LITD 32
Others
859
IS/ISO/IEC 30107 : Part 4 : 2020
Information technology Biometric presentation attack detection Part 4: Profile for testing of mobile devices
LITD 32
Others
860
IS 17737 : Part 1 : 2021
Mobile Device Security Part 1 Overview
LITD 17
Terminology
861
IS 17737 : Part 2 : 2021
Mobile Device Security Part 2 Security Requirements
LITD 17
Product Specification
862
IS 17737 : Part 3 : 2021
Mobile Device Security Part 3 Security levels
LITD 17
Product Specification
863
IS 17743 : Part 2 : Sec 1 : 2021
Software Engineering Lifecycle profiles for Very Small Entities VSEs Part 2: Framework and taxonomy
LITD 14
Process Specification
864
IS/ISO/IEC 19795 : Part 2 : 2007
Determination of fusibility of ash from coal, coke and lignite (First Revision)
LITD 32
Methods of tests
865
IS/ISO/IEC 19795 : Part 3 : 2007
INFORMATION TECHNOLOGY BIOMETRIC PERFORMANCE TESTING AND REPORTING PART 3: MODALITY-SPECIFIC TESTING
LITD 32
Methods of tests
866
IS/ISO/IEC 19795 : Part 7 : 2011
Information Technology - Biometric performance testing and reporting - part 7: Testing of on-card biometric comparison algorithms
LITD 32
Methods of tests
867
IS/ISO/IEC 29141 : 2009
Information technology Biometrics Tenprint capture using biometric application programming interface BioAPI
LITD 32
Others
868
IS/ISO/IEC 29197 : 2015
Information technology Evaluation methodology for environmental influence in biometric system performance
LITD 32
Methods of tests
869
IS/ISO/IEC 30106 : Part 1 : 2016
Information technology Object oriented BioAPI Part 1: Architecture
LITD 32
Others
870
IS/ISO/IEC 30106 : Part 2 : 2020
Information technology Object oriented BioAPI Part 2: Java implementation
LITD 32
Others
871
IS/ISO/IEC 30106 : Part 3 : 2020
Information technology Object oriented BioAPI Part 3: C implementation
LITD 32
Others
872
IS/ISO/IEC 30106 : Part 4 : 2019
Information technology Object oriented BioAPI Part 4: C implementation
LITD 32
Others
873
IS/IEC 62153 : Part 4 : Sec 4 : 2015
Personal fall arrest systems - Specification : Part 1 full body harness (Fourth Revision)
LITD 6
Methods of tests
874
IS/ISO 22739 : 2020
Blockchain and distributed ledger technologies Vocabulary
LITD 29
Terminology
875
IS/ISO/IEC/TR 30125 : 2016
Methods of Sampling and Test for Solid Waste Part 2-Determination of Moisture Content (Excluding Industrial Solid Wastes)
LITD 32
Others
876
IS/ISO/IEC 30136 : 2018
Information technology Performance testing of biometric template protection schemes
LITD 32
Methods of tests
877
IS/ISO/IEC 39794 : Part 1 : 2019
Information technology Extensible biometric data interchange formats Part 1: Framework
LITD 32
Others
878
IS/ISO/IEC 39794 : Part 4 : 2019
Information technology Extensible biometric data interchange formats Part 4: Finger image data
LITD 32
Others
879
IS/ISO/IEC 19795 : Part 5 : 2011
Information Technology - Biometric performance testing and reporting - part 5: Access control scenario and grading scheme
LITD 32
Methods of tests
880
IS/ISO/IEC 18745 : Part 1 : 2018
Test methods for machine readable travel documents MRTD and associated devices Part 1: Physical test methods for passport books durability
LITD 16
Product Specification
881
IS/IEC 62642 : Part 2 : Sec 6 : 2010
Alarm systems Intrusion and hold-up systems Part 2 Intrusion detectors Section 6 Opening contacts magnetic
LITD 26
Product Specification
882
IS/IEC 61189 : Part 2 : 2006
Hot Rolled Steel Beam, Column, Channel and Angle Sections — Dimensions and Properties (Fourth Revision)
LITD 5
Methods of tests
883
IS/IEC 61189 : Part 3 : 2007
Test methods for electrical materials printed boards and other interconnection structures and assemblies Part 3 Test methods for interconnection structures printed boards
LITD 5
Methods of tests
884
IS/IEC 61189 : Part 5 : 2006
Test methods for electrical materials interconnection structures and assemblies Part 5 Test methods for printed board assemblies
LITD 5
Methods of tests
885
IS/ISO/IEC/TR 20547 : Part 1 : 2020
Methods of sampling of petroleum and its products: Part 3 method of sampling of semi - Solid and solid petroleum products (Second Revision)
LITD 30
Others
886
IS/ISO/IEC/TR 24028 : 2020
Methods of test for petroleum and its products Part 4/Section 1 Determination of ash
LITD 30
Others
887
IS/ISO/IEC/TR 24030 : 2021
Methods of test for petroleum and its products Part 4/Section 2 ash from grease sulphated ash and water soluble ash Fourth Revision
LITD 30
Others
888
IS/IEC 60740 : Part 1 : 2005
LAMINATIONS FOR TRANSFORMERS AND INDUCTORS PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
LITD 24
Product Specification
889
IS/IEC 62137 : Part 4 : 2014
Electronics assembly technology Part 4 Endurance test methods for solder joint of area array type package surface mount devices
LITD 5
Methods of tests
890
IS/IEC 60068 : Part 1 : 2013
Environmental Testing Part 1 General and Guidance
LITD 1
Methods of tests
891
IS/IEC 60068 : Part 2 : Sec 10 : 2018
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
LITD 1
Methods of tests
892
IS/IEC/TS 63134 : 2020
Active assisted living AAL use cases
LITD 35
Code of Practice
893
IS/ISO/IEC/TR 24029 : Part 1 : 2021
Artificial Intelligence AI Assessment of the robustness of neural networks Part 1: Overview
LITD 30
Others
894
IS/IEC 60695 : Part 1 : Sec 11 : 2014
Fire Hazard Testing Part 1 Guidance for assessing the fire hazard of electrotechnical products Section 11 Fire Hazard Assessment
LITD 1
Methods of tests
895
IS/ISO/IEC 19086 : Part 2 : 2018
Information Technology Cloud Computing Service Level Agreement SLA Framework Part 2 : Metric Model
SSD 10
Service Specification
896
IS/ISO/IEC/TR 23613 : 2020
Information Technology Cloud Computing Cloud Service Metering Elements and Billing Modes
SSD 10
Service Specification
897
IS/IEC 63093 : Part 5 : 2018
FERRITE CORES GUIDELINES ON DIMENSIONS AND THE LIMITS OF SURFACE IRREGULARITIES PART 5: EP-CORES AND ASSOCIATED PARTS FOR USE IN INDUCTORS AND TRANSFORMERS
LITD 24
Product Specification
898
IS/ISO/IEC 19086 : Part 3 : 2017
Carbon black for paints - Specification ( Second Revision )
SSD 10
Service Specification
899
IS/ISO/IEC 19086 : Part 4 : 2019
Information Technology Cloud Computing Service Level Agreement SLA Framework Part 4 : Components of Security and of Protection of PII
SSD 10
Service Specification
900
IS/ISO/IEC/TR 23187 : 2020
Guidelines for Performance Evaluation of Treatment Technologies for Water Reuse Systems Part 2 Methodology to Evaluate Performance of Treatment Systems on the Basis of Greenhouse Gas Emissions
SSD 10
Service Specification
901
IS/IEC 60068 : Part 2 : Sec 5 : 2018
Environmental Testing Part 2 Tests Section 5 Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
LITD 1
Methods of tests
902
IS/IEC 60068 : Part 2 : Sec 17 : 1994
Basic environmental testing procedures Part 2: Tests Section 17: Test Q: Sealing
LITD 1
Methods of tests
903
IS/IEC 60068 : Part 2 : Sec 38 : 2021
Environmental Testing Part 2 Tests Section 5 Test ZAD: Composite TemperatureHumidity Cyclic test
LITD 1
Methods of tests
904
IS/IEC 60068 : Part 2 : Sec 47 : 2005
Environmental Testing Part 2 Tests Section 47 Mounting of specimens for vibration impact and similar dynamic tests
LITD 1
Methods of tests
905
IS/IEC 60068 : Part 3 : Sec 1 : 2023
Environmental testing Part 3 Supporting documentation and guidance section -1: Cold and dry heat tests
LITD 1
1
Methods of tests
906
IS/IEC 60068 : Part 3 : Sec 4 : 2023
Environmental testing Part 3 Supporting documentation and guidance Section - 4: Damp heat tests First Revision
LITD 1
1
Methods of tests
907
IS/IEC 60695 : Part 1 : Sec 30 : 2017
Fire Hazard Testing Part 1 Guidance for assessing the fire hazard of electrotechnical products Section 30 Preselection testing process General guidelines
LITD 1
Code of Practice
908
IS/ISO/IEC 19790 : 2012
INFORMATION TECHNOLOGY SECURITY TECHNIQUES SECURITY REQUIREMENTS FOR CRYPTOGRAPHIC MODULES
LITD 17
Product Specification
909
IS/ISO/IEC/TS 19795 : Part 9 : 2019
Information technology Biometric performance testing and reporting Part 9: Testing on mobile devices
LITD 32
Methods of tests
910
IS/ISO/IEC 19798 : 2017
Information technology Office equipment Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer
LITD 36
Methods of tests