| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS/ISO 7240 : Part11 : 2011 |
Fire detection and alarm systems: Part 11 manual call points |
CED 22 |
| 2 |
IS 14686 : Part 4 : 2012 |
Radio frequency and coaxial cable assemblies: Part 4: Sectional specification for semi - Rigid coaxial cable assemblies |
LITD 6 |
| 3 |
IS 15934 : PART 5 : 2011 |
Liquid crystal and solid - State display devices: Part 5 environmental, endurance and mechanical test methods |
LITD 4 |
| 4 |
IS 14231 : Part 4 : 1995 |
Cabled distribution systems for television and sound signals - Specificaiton: Part 4 passive coaxial wideband distribution components |
LITD 7 |
| 5 |
IS 15244 : 2002 |
Analog set top box - Specificaiton |
LITD 7 |
| 6 |
IS 15245 : 2002 |
Digital set top box - Specificaiton |
LITD 7 |
| 7 |
IS 15377 : 2003 |
Digital set top box for direct - To - Home (DTH) services - Specificaiton |
LITD 7 |
| 8 |
IS 11182 : Part 5 : 1993 |
Guide for evaluation of insulation systems of electrical equipment: Part 5 mechanical endurance functional tests |
ETD 2 |
| 9 |
IS/IEC 60947 : PART 1 : 2007 |
Low - Voltage switchgear and controlgear: Part 1 general rules (First Revision) |
ETD 7 |
| 10 |
IS 13875 : Part 1 : 1993 |
Digital measuring instruments for measurement and control: Part 1 general specifications concerning terms Tests and data sheet details |
LITD 8 |
| 11 |
IS 12448 : Part 4 : 1989 |
Basic testing procedures and measuring methods for Electromechanical components for electronic equipment: Part 4 dynamic stress tests |
LITD 3 |
| 12 |
IS 13409 : 1992 |
High frequency transreceTVers specification |
LITD 12 |
| 13 |
IS/IEC 691 : 1993 |
Thermal Links - Requirements and Application Guide |
ETD 39 |
| 14 |
IS/IEC 127 : PART 6 : 1994 |
Miniature fuses: Part 6 fuse holders for miniature cartridge fuse links - Specification |
ETD 39 |
| 15 |
IS 13010 : 2002 |
AC watthour meters, class 0.5, 1 and 2 - Specification (First Revision) |
ETD 13 |
| 16 |
IS 1766 : 1998 |
Time switches for metering and load control (Second Revision) |
ETD 13 |
| 17 |
IS/IEC 60079 : Part 15 : 2010 |
Explosive atmospheres: Part 15 equipment protection by type of protection "N" (First Revision) |
ETD 22 |
| 18 |
IS 12508 : 2013 |
Electric Tachometer for Automotive Vehicles — Specification |
TED 11 |
| 19 |
IS 302 : Part 2 : Sec 25 : 2014 |
Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens |
ETD 32 |
| 20 |
IS 7305 : 2018 |
Fixed capacitors for use in electronic equipment - Generic specification (Second Revision) |
LITD 5 |
| 21 |
IS 13558 : Part 1 : 2018 |
Cranes - Control layout and characteristics: Part 1 general principles (First Revision) |
MED 14 |
| 22 |
IS 12761 : Part 4 : 2018 |
Equipment for continuously monitoring radioactivity in gaseous effluents: Part 4 specific requirements for Radioactive Iodine Monitors ( First Revision ) |
LITD 8 |
| 23 |
IS 12761 : Part 2 : 2018 |
Equipment for continuous monitoring of radioactivity in gaseous effluents: Part 2 specific requirements for radioactive aerosol monitors including transuranic aerosols (First Revision) |
LITD 8 |
| 24 |
IS 16835 : Part 3 : 2018 |
Safety of machinery - Pressure - Sensitive protective devices: Part 3 general principles for design and testing of pressure - Sensitive bumpers, plates, wires and similar devices |
MED 40 |
| 25 |
IS 17066 : Part 1 : 2018 |
Reed switches: Part 1 generic specification |
ETD 35 |
| 26 |
IS 16835 : Part 2 : 2018 |
Safety of machinery - Pressure - Sensitive protective devices: Part 2 general principles for design and testing of pressure - Sensitive edges and pressure - Sensitive bars |
MED 40 |
| 27 |
IS/IEC 60947 : Part 5 : Sec 5 : 2016 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 5 electrical emergency stop devices with mechanical latching function |
ETD 7 |
| 28 |
IS/IEC 61439 : Part 4 : 2012 |
Low - Voltage switchgear and controlgear assemblies: Part 4 particular requirements for assemblies for construction sites (Acs) |
ETD 7 |
| 29 |
IS 17120 : 2019 |
In - Cable control and protection device for mode 2 charging of electric road vehicles (Ic - Cpd) |
ETD 7 |
| 30 |
IS 8872 : Part 1 : 2018 |
Potentiometers for use in electronic equipment: Part 1 generic specification (First Revision) |
LITD 5 |
| 31 |
IS 12761 : Part 1 : 2018 |
Equipment for continuous monitoring of radioactivity in gaseous effluents: Part 1 general requirements (First Revision) |
LITD 8 |
| 32 |
IS/ISO 19014 : Part 3 : 2018 |
Earth-Moving Machinery - Functional Safety Part 3 Environmental Performance and Test Requirements of Electronic and Electrical Components Used in Safety-Related Parts of the Control System |
MED 7 |
| 33 |
IS 17270 : 2019 |
Intelligent Transport Systems ( ITS ) : Reverse Parking Alert System ( RPAS ) |
TED 28 |
| 34 |
IS/IEC 61800 : Part 2 : 2015 |
Adjustable Speed Electrical Power Drive Systems Part 2 General Requirements — Rating Specifications for Low Voltage Adjustable Speed a.c. Power Drive Systems |
ETD 31 |
| 35 |
IS/IEC 61204 : 2001 |
Low-Voltage Power Supply Devices DC Output — Performance Characteristics |
ETD 31 |
| 36 |
IS/IEC 60255 : Part 21 : Sec 2 : 1988 |
Electrical Relays Part 21 Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 2 Shock and bump tests |
ETD 35 |
| 37 |
IS/IEC 62421 : 2007 |
Electronics Assembly Technology-Electronic Modules |
LITD 5 |
| 38 |
IS/IEC 61757 : 2018 |
Fibre Optic Sensors - Generic Specification |
LITD 11 |
| 39 |
IS 15474 : Part 3 : Sec 5 : 2018 |
Dependability Management Part 3 Application Guide Section 5 Reliability Test Conditions and Statistical Test Principles |
LITD 2 |
| 40 |
IS 15934 : Part 10 : Sec 1 : 2016 |
Liquid crystal display devices: Part 10 environmental, endurance and mechanical test methods: Sec 1 mechanical |
LITD 4 |
| 41 |
IS/ISO 7240 : Part 8 : 2014 |
Fire Detection and Alarm Systems Part 8 Point-Type Fire Detectors Using a Carbon Monoxide Sensor in Combination with a Heat Sensor |
CED 22 |
| 42 |
IS 15500 : PART 4 : 2004 |
DEEPWELL HANDPUMPS, COMPONENTS AND SPECIAL TOOLS SPECIFICATION PART 4 STEEL COMPONENTS |
MED 27 |
| 43 |
IS/ISO 7240 : Part 18 : 2017 |
Fire Detection and Alarm Systems Part 18 Input/Output Devices |
CED 22 |
| 44 |
IS/IEC 60079 : PART 11 : 2006 |
Explosive Atmospheres Part 11 Equipment Protection by Intrinsic Safety “i” (First Revision) |
ETD 22 |
| 45 |
IS 12444 : 1988 |
Copper Wire Rods for Electrical Applications — Specification ( First Revision ) |
MTD 8 |
| 46 |
IS 517 : 1986 |
Specification for Methanol ( Methyl Alcohol ) ( Third Revision ) |
PCD 9 |
| 47 |
IS 15909 : 2015 |
PVC Geomembranes for Lining - Specification ( Second Revision ) |
TXD 30 |
| 48 |
IS 14254 : Part 2 : 2006 |
Programmable controllers: Part 2 equipment requirements and tests (First Revision) |
ETD 18 |
| 49 |
IS 13779 : 1999 |
AC static watihour meters, class 1 and 2 - Specification (First Revision) |
ETD 13 |
| 50 |
IS 3470 : 2002 |
Hexane, Food Grade |
PCD 3 |
| 51 |
IS 10337 : 1982 |
32.768 Khz Quartz Crystal Units for Wrist Watches |
LITD 24 |
| 52 |
IS 11334 : 1984 |
Method of measurement for piezoelectric ceramic resonators and resonator units for frequency control and selection |
LITD 24 |
| 53 |
IS 14697 : 1999 |
AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification |
ETD 13 |
| 54 |
IS 1117 : 1975 |
One-mark pipettes |
CHD 10 |
| 55 |
IS 14686 : Part 1 : 2006 |
Radio frequency and coaxial cable assemblies: Part 1 generic specification - General requirements and test methods (First Revision) |
LITD 6 |
| 56 |
IS 13247 : Part 1 : 1992 |
Complete filter units for radio interference suppression: Part 1 generic specification |
LITD 5 |
| 57 |
IS 14132 : 1995 |
Walk - through metal detector for usein weapon detection - Specificaiton |
LITD 26 |
| 58 |
IS/ISO 80601 : Part 2 : Sec 61 : 2011 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 61 pulse oximeter equipment |
MHD 15 |
| 59 |
IS 13094 : 2021 |
Selection of ground improvement techniques for foundation in weak soils - Guidelines (first revision) |
CED 43 |
| 60 |
IS/ISO 3826 : Part 1 : 2019 |
Plastics collapsible containers for human blood and blood components Part 1 Conventional containers First Revision |
MHD 12 |
| 61 |
IS 15586 : 2021 |
Securities - Classification of financial instruments CFI code Second Revision |
SSD 3 |
| 62 |
IS 9205 : Part 1 : 1979 |
Specification for directly heated negat4e temperature coefficient thermistors: Part 1 general requirements and methods of tests |
LITD 24 |
| 63 |
IS 17777 : 2021 |
Textiles Dyed knitted or crochet fabric made from synthetic fibres Specification |
TXD 10 |
| 64 |
IS 17754 : Part 1 : 2022 |
Agricultural grain driers - Determination of drying performance-Part1:General |
FAD 20 |
| 65 |
IS/IEC 60079 : PART 7 : 2015 |
Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision) |
ETD 22 |
| 66 |
IS/IEC 60947 : Part 5 : Sec 1 : 2009 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision) |
ETD 7 |
| 67 |
IS/IEC/TS 61439 : Part 7 : 2014 |
Low-Voltage Switchgear and Controlgear Assemblies Part 7 Assemblies for Specific Applications such as Marinas, Camping Sites, Market Squares, Electric Vehicles Charging Stations |
ETD 7 |
| 68 |
IS/IEC 60947 : Part 5 : Sec 2 : 2007 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 2 proximity switches |
ETD 7 |
| 69 |
IS/ISO 10434 : 2020 |
Bolted Bonnet Steel Gate Valves for the Petroleum, Petrochemical and Allied Industries |
MED 17 |
| 70 |
IS 11287 : 1985 |
Specification for bridge insulations testers (Magneto Generator Type) |
ETD 12 |
| 71 |
IS/ISO/IEC/TR 23188 : 2020 |
Information Technology Cloud computing Edge computing landscape |
SSD 10 |
| 72 |
IS 13450 : Part 1 : Sec 11 : 2020 |
Medical Electrical Equipment Part 1 General Requirements for Basic Safety and Essential Performance Section 11 Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
MHD 15 |
| 73 |
IS/ISO 7240 : Part 3 : 2010 |
Fire detection and alarm systems: Part 3 audible alarm devices |
CED 22 |
| 74 |
IS/ISO 7240 : Part 5 : 2012 |
Fire Detection and Alarm Systems Part 5 Point-Type Heat Detectors |
CED 22 |
| 75 |
IS/ISO 7240 : Part 7 : 2011 |
Fire detection and alarm systems: Part 7 point - Type smoke detectors using scattered light, transmitted light or ionization |
CED 22 |
| 76 |
IS/ISO 7240 : Part 17 : 2009 |
Fire detection and alarm systems: Part 17 short - Circuit isolators |
CED 22 |
| 77 |
IS/ISO 7240 : Part 15 : 2004 |
Fire detection and alarm systems: Part 15 point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor |
CED 22 |
| 78 |
IS 7839 : 2022 |
DRIED ICE CREAM MIX - SPECIFICATION (First Revision of IS 7839) |
FAD 19 |
| 79 |
IS 14570 : 2012 |
Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals (First Revision) |
ETD 12 |
| 80 |
IS 15884 : 2010 |
Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification |
ETD 13 |
| 81 |
IS 10423 : 2023 |
Electroacoustics- Specifications For Personal Sound Exposure Meters (First Revision) |
LITD 7 |
| 82 |
IS/ISO 22315 : 2014 |
Societal Security Mass Evacuation Guidelines for planning |
MSD 17 |
| 83 |
IS 10645 : Part 8 : 2023 |
Statistical methods in process management Capability and performance Part 8: Machine performance of a multi-state production process |
MSD 3 |
