| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS/IEC 60947 : Part 4 : Sec 2 : 2011 |
Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 2 a.c semiconductor motor controllers and starters (First Revision) |
ETD 7 |
| 2 |
IS 14700 : Part 4 : Sec 24 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 24 test methods for protective devices for HEMP conducted disturbance (First Revision) |
LITD 9 |
| 3 |
IS 14700 : Part 4 : Sec 7 : 2017 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 7 general guide on harmonic and interharmonics measurements and instrumentation, for power supply systems and equipment eonnected thereto (First Revision) |
LITD 9 |
| 4 |
IS 6873 : Part 3 : 2015 |
Limits and methods of measurement of radio disturbance characteristics: Part 3 sound and television broadcast receivers and associated equipment (Third Revision) |
LITD 9 |
| 5 |
IS 14700 : Part 4 : Sec 4 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 4 electrical fast transient / burst immunity test (Second Revision) |
LITD 9 |
| 6 |
IS 14700 : Part 4 : Sec 2 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 2 electrostatic discharge immunity test (Second Revision) |
LITD 9 |
| 7 |
IS 14700 : Part 4 : Sec 25 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 25 HEMP immunity test methods for equipment and systems |
LITD 9 |
| 8 |
IS 14700 : Part 4 : Sec 14 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 14 voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
LITD 9 |
| 9 |
IS 14700 : Part 4 : Sec 33 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 33 measurement methods for high - Power transient parameters |
LITD 9 |
| 10 |
IS 10052 : Part 1 : Sec 3 : 2018 |
Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 3 Ancillary equipment — Disturbance power |
LITD 9 |
| 11 |
IS 10052 : Part 4 : Sec 4 : 2018 |
Radio disturbance and immunity measuring apparatus and methods - Specificaiton: Part 4 uncertainties, statistics and limit modelling: Sec 4 statistics of complaints and a model for the calculation of limits for the protection of radio services |
LITD 9 |
| 12 |
IS 10052 : Part 1 : Sec 5 : 2018 |
Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 5 Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
LITD 9 |
| 13 |
IS 15039 : 2018 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement (First Revision) |
LITD 9 |
| 14 |
IS 10052 : Part 2 : Sec 1 : 2018 |
Specification for radio disturbance and immunity measuring apparatus and methods: Part 2 methods of measurement of disturbances and immunity: Sec 1 conducted disturbance measurements (Second Revision) |
LITD 9 |
| 15 |
IS 12233 : Part 1 : 2018 |
Radio interference characteristics of overhead power lines and high - Voltage equipment: Part 1 description of phenomena |
LITD 9 |
| 16 |
IS 12233 : Part 3 : 2019 |
Radio Interference Characteristics of Overhead Power Lines and High-Voltage Equipment Part 3 Code of Practice for Minimizing the Generation of Radio Noise ( Second Revision) |
LITD 9 |
| 17 |
IS 14700 : Part 6 : Sec 1 : 2019 |
Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 1 Immunity standard for residential, commercial and light-industrial environments ( First Revision ) |
LITD 9 |
| 18 |
IS 14700 : Part 6 : Sec 2 : 2019 |
Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 2 Immunity standard for industrial environments ( First Revision ) |
LITD 9 |
| 19 |
IS 6873 : Part 5 : 2019 |
Limits and Methods of Measurement of Radio Disturbance Characteristics Part 5 Electrical Lighting and Similar Equipment ( Third Revision ) |
LITD 9 |
| 20 |
IS/IEC 61204 : Part 3 : 2016 |
Low-Voltage Switch Mode Power Supplies Part 3 Electromagnetic Compatibility ( EMC ) |
ETD 31 |
| 21 |
IS 15040 : 2020 |
Radio Disturbance Characteristics for Protection of Receivers used on Board Vehicles, Boats and Internal Combustion Engines — Limits and Methods of Measurement ( Second Revision ) |
LITD 9 |
| 22 |
IS/IEC 61800 : Part 5 : Sec 1 : 2016 |
Adjustable Speed Electrical Power Drive Systems Part 5 Safety Requirements Section 1 Electrical, thermal and energy |
ETD 31 |
| 23 |
IS 14700 : Part 4 : Sec 17 : 2018 |
Electromagnetic Compatiblity (EMC) Part 4 Testing & Measurement Techniques Section 17 Ripple on d.c input Power Port Immunity Test |
LITD 9 |
| 24 |
IS 14700 : Part 4 : Sec 5 : 2019 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 5 surge immunity test (First Revision) |
LITD 9 |
| 25 |
IS 12552 : 2020 |
Sound and Television Broadcast Receivers and Associated Equipment — Immunity Characteristics — Limits and Methods of Measurement ( Second Revision ) |
LITD 9 |
| 26 |
IS 14700 : Part 3 : Sec 2 : 2020 |
Electromagnetic Compatibility (EMC) Part 3 Limits Section 2 Limits for harmonic current emissions ( equipment input current ? 16 A per phase ) ( Third Revision ) |
LITD 9 |
| 27 |
IS 14700 : Part 4 : Sec 6 : 2016 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 6 immunity to conducted disturbances, induced by radio - Frequency fields |
LITD 9 |
| 28 |
IS 14700 : Part 4 : Sec 13 : 2016 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 13 harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity test |
LITD 9 |
| 29 |
IS 14700 : Part 4 : Sec 34 : 2017 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 34 voltage dips, short interruptions and voltage variations immunity tests for current more than 16 A per phase |
LITD 9 |
| 30 |
IS 14700 : Part 4 : Sec 35 : 2018 |
Electromagnetic Compatibility (EMC) Part 4 Testing & Measurement Techniques Section 35 HPEM Simulator Compendium |
LITD 9 |
| 31 |
IS 1885 : Part 25 : 1967 |
Electrotechnical vocabulary: Part 25 radiolocation and radio - Navigation |
LITD 12 |
| 32 |
IS 6873 : Part 4 : 1999 |
Limits and Methods of Measurement of Radio Disturbance Characteristics - Part 4 : Industrial, Scientific and Medical (ISM) Radio-frequency Equipment |
LITD 9 |
| 33 |
IS 10052 : Part 1 : Sec 1 : 2019 |
Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 1 Measuring apparatus ( Third Revision ) |
LITD 9 |
| 34 |
IS 12233 : Part 2 : 2017 |
Radio interference characterstics of overhead power lines and high - Voltage equipment: Part 2 methods of measurement and procedure for determining limits (First Revision) |
LITD 9 |
| 35 |
IS/IEC 62311 : 2007 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
LITD 9 |
| 36 |
IS/ISO 50004 : 2020 |
ENERGY MANAGEMENT SYSTEMS GUIDANCE FOR THE IMPLEMENTATION MAINTENANCE AND IMPROVEMENT OF AN ISO 50001 ENERGY MANAGEMENT SYSTEM First Revision |
MED 39 |
| 37 |
IS 17607 : 2021 |
Polyolefin agricultural twines |
TXD 9 |
| 38 |
IS/IEC 60862 : Part 1 : 2003 |
Surface acoustic wave (SAW) filters of assessed quality: Part 1 generic specification |
LITD 24 |
| 39 |
IS 12746 : Part 2 : 1989 |
Telecontrol equipment and systems: Part 2 environmental conditions and power supplies |
LITD 10 |
| 40 |
IS 14700 : Part 4 : Sec 3 : 2018 |
Electromagnetic Compatibility (EMC) Part 4 Testing and Measurement Techniques Section 24 Test methods for protective devices for HEMP conducted disturbance ( First Revision ) |
LITD 9 |
| 41 |
IS 6873 : PART 2 : SEC 2 : 2019 |
Limits and Methods of Measurement of Radio Disturbance Characteristics Part 2 Electromagnetic Compatibility (EMC) — Requirements for Household Appliances, Electric Tools and Similar Apparatus Section 2 Emission — Product family standard ( Forth Revision ) |
LITD 9 |
| 42 |
IS 10052 : Part 1 : Sec 4 : 2018 |
Radio disturbance and immunity measuring apparatus and methods - Specificaiton: Part 1 radio disturbance and immunity measuring apparatus: Sec 4 antennas and test sites for radiated disturbance measurements |
LITD 9 |
| 43 |
IS 6873 : PART 2 : SEC 1 : 2015 |
Withdrawal |
LITD 9 |
