| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 6303 : Part 4 : 2013 |
Primary batteries: Part 4 safety of lithium batteries (Second Revision) |
ETD 10 |
|
2 |
IS 16081 : 2013 |
Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
ETD 3 |
|
3 |
IS 13252 : Part 1 : 2010 |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
LITD 7 |
|
4 |
IS 13730 : Part 43 : 2013 |
Specification for particular types of winding wires: Part 43 aromatic polyimide tape wrapped round copper wire, class 240 (First Revision) |
ETD 33 |
|
5 |
IS 11000 : Part 2 : Sec 2 : 2008 |
Fire hazard testing: Part 2 test methods: Sec 2 needle - Flame test method - Apparatus, cofirmatory test arrangement and guidance (First Revision) |
LITD 1 |
|
6 |
IS 11534 : Part 1 : 1985 |
Specification for directly heated positive step - Function temperature coefficient thermistors: Part 1 general requirements and methods of tests |
LITD 5 |
|
7 |
IS 1271 : 2012 |
Electrical insulation - Thermal evaluation and designation (Second Revision) |
ETD 2 |
|
8 |
IS 1293 : 2005 |
Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision) |
ETD 14 |
|
9 |
IS 13360 : Part 5 : Sec 5 : 2017 |
Plastics - Methods of testing: Part 5 mechanical properties section 5 determination of charpy impact properties - Non - Instrumented impact test (First Revision) |
PCD 27 |
|
10 |
IS 13360 : Part 5 : Sec 7 : 2017 |
Plastics - Methods of testing: Part 5 mechanical properties section 7 determination of flexural properties (First Revision) |
PCD 27 |
|
11 |
IS 13360 : Part 6 : Sec 21 : 2004 |
Plastics - Methods of testing: Part 6 thermal properties section 21 determination of ignition temperature using a hot - Air furnace |
PCD 27 |
|
12 |
IS 13360 : Part 6 : Sec 23 : 2006 |
Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source |
PCD 27 |
|
13 |
IS 13503 : 2013 |
Classification of insulating liquids (First Revision) |
ETD 3 |
|
14 |
IS 13778 : Part 3 : 2012 |
Winding wires - Test methods: Part 3 mechanical properties (First Revision) |
ETD 33 |
|
15 |
IS 13778 : Part 5 : 2012 |
Winding wires - Test methods: Part 5 electrical properties (First Revision) |
ETD 33 |
|
16 |
IS 13886 : 1993 |
Specification for bimetallic thermostats and thermal cutouts for use with electric iron |
ETD 32 |
|
17 |
IS 1448 : Part 21 : 2019 |
Methods of test for petroleum and its products [P : 21] determination of flash point - Pensky - Martens closed cup method (Fourth Revision) |
PCD 1 |
|
18 |
IS 14624 : Part 2 : 2012 |
Safety of laser products: Part 2 safety of optical fibre communication systems (OFCS) (First Revision) |
LITD 11 |
|
19 |
IS 14901 : Part 1 : 2010 |
Semiconductor devices - Discrete devices and integrated circuits: Part 1 general (First Revision) |
LITD 5 |
|
20 |
IS 15382 : Part 1 : 2014 |
Insulation coordination for equipment within low - Voltage systems: Part 1 principles, requirements and tests (First Revision) |
ETD 19 |
|
21 |
IS 15382 : Part 3 : 2019 |
Insulation coordination for equipment within low-voltage systems : Part 3 use of coating potting or moulding for protection against pollution |
ETD 19 |
|
22 |
IS 2824 : 2007 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Second Revision) |
ETD 2 |
|
23 |
IS 3400 : Part 1 : 2012 |
Methods of test for vulcanized rubber: Part 1 determination of tensile stress - Strain properties (Third Revision) |
PCD 29 |
|
24 |
IS 3400 : Part 6 : 2018 |
Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids (Fourth Revision) |
PCD 29 |
|
25 |
IS 3722 : Part 1 : 1983 |
Letter symbols and signs used in electrical technology: Part 1 general guidance on symbols and subscripts (First Revision) |
ETD 1 |
|
26 |
IS 3722 : Part 2 : 1983 |
Letter symbols and signs used in electrical technology: Part 2 reference tables for symbols and subscripts (First Revision) |
ETD 1 |
|
27 |
IS 4545 : Part 1 : 2008 |
Methods of measurement on receivers for television broadcast transmissions: Part 1 general considerations (Second Revision) |
LITD 7 |
|
28 |
IS 616 : 2017 |
Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) |
LITD 7 |
|
29 |
IS 694 : 2010 |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision) |
ETD 9 |
|
30 |
IS 9000 : Part 11 : 1983 |
Basic environmental testing procedures for electronic and electrical items: Part 11 salt mist test |
LITD 1 |
|
31 |
IS 9000 : Part 4 : 2020 |
Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision ) |
LITD 1 |
|
32 |
IS 9457 : 2005 |
Safety colours and safety signs - Code of practice (First Revision) |
CHD 8 |
|
33 |
IS 9968 : Part 1 : 1988 |
Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision) |
ETD 9 |
|
34 |
IS/QC 302400 : 1994 |
Fixed capacitors for use in electronic equipment: Sectional specification for fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
LITD 5 |
|
35 |
IS/QC 420000 : 1994 |
Varistors for use in electronic equipment - Generic specification |
LITD 5 |
|
36 |
IS/QC 420100 : 1994 |
Varistors for use in electronic equipment. -Sectional specification for surge suppression varistors |
LITD 5 |
|
37 |
IS/IEC 60990 : 2016 |
Methods of measurement of touch current and protective conductor current (First Revision) |
LITD 7 |
|
38 |
IS/IEC 60309 : Part 1 : 2002 |
Plugs, socket - Outlets and couplers for industrial purposes: Part 1 general requirements (First Revision) |
ETD 14 |
|
39 |
IS/IEC 60320 : Part 2 : Sec 2 : 1998 |
Appliance couplers for household and similar general purposes: Part 2: Sec 2 interconnection couplers for household and similar equipment |
ETD 14 |
|
40 |
IS/IEC 691 : 1993 |
Thermal Links - Requirements and Application Guide |
ETD 39 |
|
41 |
IS 2032 : Part 2 : 1962 |
Graphical symbols used in electrotechnology: Part 2 Kind of current distribution systems and methods of connection |
ETD 1 |
|
42 |
IS 9001 : Part 13 : 1981 |
Guidance for environmental testing: Part 13 vibration (Sinusoidal) test |
LITD 1 |
|
43 |
IS/IEC 60127 : PART 1 : 2006 |
Miniature fuses: Part 1 definitions for miniature fuses and general requirements for miniature fuse - Links (First Revision) |
ETD 39 |
|
44 |
IS/IEC 60309 : PART 2 : 2002 |
Plugs, socket - Outlets and couplers or industrial purposes: Part 2 dimensional interchangeability requirements for pin and contact - Tube accessories (First Revision) |
ETD 14 |
|
45 |
IS/IEC 60320 : PART 1 : 2001 |
Appliance couplers for household and similar general purposes: Part 1 general requirements |
ETD 14 |
|
46 |
IS/IEC 60320 : PART 2 : Sec 3 : 1998 |
Appliance couplers for household and similar general purposes: Part 2 - 3 appliance couplers with a degree of protection higher than ipxo |
ETD 14 |
|
47 |
IS/IEC 60730 : PART 1 : 1999 |
Automatic electrical controls for household and similar use : part 1 General Requirements |
ETD 32 |
|
48 |
IS/IEC 60947 : PART 1 : 2007 |
Low - Voltage switchgear and controlgear: Part 1 general rules (First Revision) |
ETD 7 |
|
49 |
IS/IEC 61058 : PART 1 : 2000 |
Switches for appliances: Part 1 general requirements |
ETD 14 |
|
50 |
IS/IEC 61558 : PART 1 : 1997 |
Safety of power transformers, power supply units and similar: Part 1 general requirements and tests |
ETD 16 |
|
51 |
IS/IEC 60127 : PART 2 : 2003 |
Miniature Fuses Part 2 Cartridge Fuse - Links (First Revision) |
ETD 39 |
|
52 |
IS/IEC 60529 : 2001 |
Degrees of protection provided by enclosures (IP Code) |
ETD 1 |
|
53 |
IS/IEC 60127 : Part 4 : 2005 |
Miniature fuses Part 4 universal modular fuse - Links (Umf) - Through - Hole and surface mount types |
ETD 39 |
|
54 |
IS 16108 : 2012 |
Photobiological safety of lamps and lamp systems |
ETD 23 |
|
55 |
IS 16270 : 2014 |
Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test |
ETD 11 |
|
56 |
IS 16220 : Part 1 : 2015 |
General purpose lead - Acid batteries (Valve - Regulated Types): Part 1 general requirements, functional characteristics - Methods of test |
ETD 11 |
|
57 |
IS 16449 : Part 2 : 2015 |
Graphical symbols - Safety colours and safety signs: Part 2 design principles for product safety labels |
PGD 1 |
|
58 |
IS 16463 : Part 11 : 2016 |
Low - Voltage surge protective devices: Part 11 surge protective devices connected to low - Voltage power systems - Requirements and test methods |
ETD 7 |
|
59 |
IS 16220 : Part 2 : 2017 |
General Purpose Lead-Acid Batteries (Valve-Regulated Types) Part 2 Dimensions, Terminals and Marking |
ETD 11 |
|
60 |
IS 16450 : 2017 |
Graphical symbols for use on equipment - Registered symbols |
PGD 1 |
|
61 |
IS 16449 : Part 3 : 2018 |
Graphical Symbols- Safety Colours and Safety Signs Part 3 Design Principles for Graphical Symbols for Use in Safety Signs |
PGD 1 |
|
62 |
IS 16451 : 2018 |
Graphical Symbols- Safety Colours and Safety Signs- Registered Safety Signs |
PGD 1 |
|
63 |
IS 2026 : Part 14 : 2018 |
Power transformers: Part 14 liquid - Immersed power transformers using high - Temperature insulation materials |
ETD 16 |
|
64 |
IS 16449 : Part 1 : 2018 |
Graphical symbols - Safety colours and safety signs: Part 1 design principles for safety signs and safety markings |
PGD 1 |
|
65 |
IS 16046 : Part 1 : 2018 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision ) |
ETD 11 |
|
66 |
IS 16046 : Part 2 : 2018 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision ) |
ETD 11 |
|
67 |
IS 13360 : Part 6 : Sec 24 : 2018 |
Plastic - Method of testing: Part 6 thermal properties section 24 cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame of cellular plastic |
PCD 27 |
|
68 |
IS 16894 : Part 2 : 2018 |
Safety requirements for secondary batteries and battery installations: Part 2 stationary batteries |
ETD 11 |
|
69 |
IS 16805 : 2018 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications |
ETD 11 |
|
70 |
IS 16838 : 2018 |
Specifications for unused silicone insulating liquids for electrotechnical purposes |
ETD 3 |
|
71 |
IS 17064 : Part 1 : 2018 |
Electromechanical elementary relays: Part 1 general and safety requirements |
ETD 35 |
|
72 |
IS/IEC 60947 : Part 5 : Sec 5 : 2016 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 5 electrical emergency stop devices with mechanical latching function |
ETD 7 |
|
73 |
IS/IEC 60695 : Part 2 : Sec 11 : 2014 |
Fire Hazard Testing Part 2-11 Glowing / Hot-Wire Based Test Methods Glow-Wire Flammability Test Method for End-Products ( GWEPT ) |
LITD 1 |
|
74 |
IS/IEC 60695 : Part 10 : Sec 2 : 2014 |
Fire hazard testing: Part 10 Abnormal heat: Sec 2 ball pressure test method |
LITD 1 |
|
75 |
IS/IEC 60695 : Part 11 : Sec 10 : 2013 |
Fire hazard testing: Part 11 test flames :: Sec 10 50 w horizontal and vertical flame test methods |
LITD 1 |
|
76 |
IS/IEC 60998 : Part 1 : 2002 |
Connecting Devices for Low-Voltage Circuits for Household and Similar Purposes Part 1 General Requirements |
ETD 14 |
|
77 |
IS/IEC 61204 : Part 7 : 2016 |
Low-Voltage Power Supplies, d.c. Output Part 7 Safety Requirements |
ETD 31 |
|
78 |
IS 7444 : 1974 |
Code of Safety for Methanol |
CHD 7 |
