| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 16227 : Part 6 : 2018 |
Instrument transformers: Part 6 additional general requirements for low - Power instrument transformers |
ETD 34 |
| 2 |
IS 16855 : Part 1 : 2018 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes: Part 1 general principles and requirements |
ETD 34 |
| 3 |
IS 14481 : Part 1 : 2018 |
Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post - Accident conditions: Part 1 general requirements |
LITD 8 |
| 4 |
IS 12761 : Part 2 : 2018 |
Equipment for continuous monitoring of radioactivity in gaseous effluents: Part 2 specific requirements for radioactive aerosol monitors including transuranic aerosols (First Revision) |
LITD 8 |
| 5 |
IS 16835 : Part 3 : 2018 |
Safety of machinery - Pressure - Sensitive protective devices: Part 3 general principles for design and testing of pressure - Sensitive bumpers, plates, wires and similar devices |
MED 40 |
| 6 |
IS 16835 : Part 2 : 2018 |
Safety of machinery - Pressure - Sensitive protective devices: Part 2 general principles for design and testing of pressure - Sensitive edges and pressure - Sensitive bars |
MED 40 |
| 7 |
IS 11866 : 2018 |
Radiation protection instrumentation - Alpha, beta and alpha/beta (Beta Energy > 60 KeV) contamination meters and monitors (First Revision) |
LITD 8 |
| 8 |
IS 14700 : Part 6 : Sec 1 : 2019 |
Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 1 Immunity standard for residential, commercial and light-industrial environments ( First Revision ) |
LITD 9 |
| 9 |
IS 14700 : Part 6 : Sec 2 : 2019 |
Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 2 Immunity standard for industrial environments ( First Revision ) |
LITD 9 |
| 10 |
IS 17017 : Part 21 : Sec 2 : 2019 |
Electric Vehicle Conductive Charging System Part 21 Electromagnetic Compatibility ( EMC ) Requirements Section 2 Off-board chargers |
ETD 51 |
| 11 |
IS/CISPR 32 : 2015 |
Electromagnetic Compatibility of Multimedia Equipment Emission Requirements |
LITD 9 |
| 12 |
IS/IEC 61204 : Part 3 : 2016 |
Low-Voltage Switch Mode Power Supplies Part 3 Electromagnetic Compatibility ( EMC ) |
ETD 31 |
| 13 |
IS/IEC 61800 : Part 3 : 2017 |
Adjustable Speed Electrical Power Drive Systems Part 3 EMC Requirements and Specific Test Methods |
ETD 31 |
| 14 |
IS/IEC 60255 : Part 26 : 2013 |
Measuring Relays and Protection Equipment Part 26 Electromagnetic Compatibility Requirements ( First Revision ) |
ETD 35 |
| 15 |
IS 16242 : Part 2 : 2020 |
Uninterruptible Power Systems UPS Part 2 Electromagnetic Compatibility EMC Requirements ( First Revision ) |
ETD 31 |
| 16 |
IS/ISO 8041 : Part 1 : 2017 |
Human Response to Vibration Measuring Instrumentation Part 1 General Purpose Vibration Meters ( First Revision ) |
MED 28 |
| 17 |
IS/IEC 61800 : Part 5 : Sec 2 : 2020 |
Adjustable Speed Electrical Power Drive Systems Part 5 Safety Requirements Section 2 Functional |
ETD 31 |
| 18 |
IS/IEC 60947 : Part 2 : 2016 |
Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision) |
ETD 7 |
| 19 |
IS 12552 : 2020 |
Sound and Television Broadcast Receivers and Associated Equipment — Immunity Characteristics — Limits and Methods of Measurement ( Second Revision ) |
LITD 9 |
| 20 |
IS 1180 : Part 3 : 2021 |
Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed |
ETD 16 |
| 21 |
IS/ISO/IEC/IEEE 8802 : Part 11 : 2018 |
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 11: Wireless Lan Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications |
LITD 28 |
| 22 |
IS 17691 : Part 2 : 2021 |
ROBOTICS SAFETY DESIGN FOR INDUSTRIAL ROBOT SYSTEMS PART 2: MANUAL LOADUNLOAD STATIONS |
PGD 18 |
| 23 |
IS 13883 : 1993 |
Thermoluminescence dosimetry systems for personal and environmental monitoring |
LITD 8 |
| 24 |
IS 15596 : Part 4 : 2016 |
Sound system equipment: Part 4 microphones |
LITD 7 |
| 25 |
IS 12746 : Part 2 : 1989 |
Telecontrol equipment and systems: Part 2 environmental conditions and power supplies |
LITD 10 |
| 26 |
IS/IEC 60947 : PART 3 : 2012 |
Low - Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse - Combination units (First Revision) |
ETD 7 |
| 27 |
IS/IEC 60947 : Part 5 : Sec 1 : 2009 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision) |
ETD 7 |
| 28 |
IS/IEC 60947 : Part 5 : Sec 2 : 2007 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 2 proximity switches |
ETD 7 |
| 29 |
IS/IEC 60669 : Part 2 : Sec 1 : 2008 |
Switches for Household and Similar Fixed Electrical Installations Part 2 Particular Requirements Section 1 Electronic Switches |
ETD 14 |
| 30 |
IS 14614 : 1998 |
Residual current - Operated protective devices (Rcds) for household and similar use - Electromagnetic compatibility |
ETD 7 |
| 31 |
IS/IEC 61439 : Part 1 : 2011 |
Low-Voltage Switchgear and Controlgear Assemblies Part 1 General Rules |
ETD 7 |
| 32 |
IS 14433 : 2022 |
INFANT MILK SUBSTITUTES - SPECIFICATION (Second Revision of IS 14433) |
FAD 19 |
| 33 |
IS 17706 : 2022 |
PULL HANDLES SPECIFICATION |
CED 15 |
| 34 |
IS 3160 : 2022 |
Tur Chuni as Livestock Feed Ingredient � Specification |
FAD 5 |
| 35 |
IS 13450 : Part 1 : SEC 2 : 2018 |
Medical electrical equipment: Part 1 general requirements for the basic safety and essential performance: Sec 2 collateral standard: electromagnetic disturbances - Requirements and tests (First Revision) |
MHD 15 |
| 36 |
IS 6873 : PART 2 : SEC 2 : 2019 |
Limits and Methods of Measurement of Radio Disturbance Characteristics Part 2 Electromagnetic Compatibility (EMC) — Requirements for Household Appliances, Electric Tools and Similar Apparatus Section 2 Emission — Product family standard ( Forth Revision ) |
LITD 9 |
| 37 |
IS 302 : Part 1 : 2008 |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
ETD 32 |
| 38 |
IS 302 : Part 1 : 2008 |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
ETD 32 |
