Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 242
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 10102 : 1982 Reviewed In : 2021 |
Technical supply conditions for rivets | 1 | Feb, 2021 | Download | |
| 2 |
IS 10238 : 2001 Reviewed In : 2021 (First Revision) |
Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 3 |
IS 10248 (Part 1) : 2011 ISO 8733 : 1997 Reviewed In : 2021 ISO 8733 : 1997 (First Revision) |
Parallel pins with internal thread: Part 1 unhardened steel and austenitic stainless steel (First Revision) | 0 | Feb, 2021 | Buy | |
| 4 |
IS 10248 (Part 2) : 2011 ISO 8735 : 1997 Reviewed In : 2021 ISO 8735 : 1997 (First Revision) |
Parallel pins with internal thread: Part 2 hardened steel and martensitic stainless steel (First Revision) | 0 | Feb, 2021 | Buy | |
| 5 |
IS 10587 : 1983 Reviewed In : 2021 |
Terminology for screw threads | 0 | Feb, 2021 | Download | |
| 6 |
IS/ISO 10683 : 2018 ISO 10683 : 2018 |
Fasteners - Non-Electrolytically Applied Zinc Flake Coating Systems | 0 | ---- | Buy | |
| 7 |
IS 1120 : 1975 Reviewed In : 2021 (First Revision) |
Specification for coach screws (First Revision) | 0 | Feb, 2021 | Download | |
| 8 |
IS 11362 : 1985 ISO 7721-l 983 Reviewed In : 2021 ISO 7721-l 983 |
Head configuration and gauging of countersunk head screws | 0 | Feb, 2021 | Buy | |
| 9 |
IS 12186 : 1987 Reviewed In : 2019 |
Tolerances for ISO - vietric trapezoidal screw threads for lead and feed screw assemblies | 0 | Dec, 2019 | Download | |
| 10 |
IS 12427 : 2001 Reviewed In : 2021 (First Revision) |
Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 11 |
IS 12952 : 2005 ISO 8740:1997 Reviewed In : 2021 ISO 8740:1997 (First Revision) |
Grooved pins - Full - Length parallel grooved, with chamfer (First Revision) | 0 | Feb, 2021 | Buy | |
| 12 |
IS 12982 : 1991 ISO 8749 : 1986 Reviewed In : 2021 ISO 8749 : 1986 |
Pins and grooved pins - Shear test | 0 | Feb, 2021 | Buy | |
| 13 |
IS 1363 (Part 1) : 2023 (Sixth Revision) |
Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision) | 0 | ---- | Buy | |
| 14 |
IS 1363 (Part 2) : 2023 (Sixth Revision) |
Hexagon head bolts, screws and nuts of product grade C Part 2 Hexagon head screws (Size range M5 to M64) (sixth revision) | 0 | ---- | Buy | |
| 15 |
IS 1363 (Part 3) : 2018 ISO 4034 : 2012 Reviewed In : 2024 ISO 4034 : 2012 (Fifth Revision) |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision ) | 0 | Apr, 2024 | Buy | |
| 16 |
IS 1364 (Part 1) : 2023 (Sixth Revision) |
Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision) | 0 | ---- | Buy | |
| 17 |
IS 1364 (Part 2) : 2023 (Fifth Revision) |
Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2)) | 0 | ---- | Buy | |
| 18 |
IS 1364 (Part 2) : 2018 ISO 4017 : 2022 Reviewed In : 2018 ISO 4017 : 2022 (Fourth Revision) |
Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision) | 0 | Mar, 2018 | Buy | |
| 19 |
IS 1364 (Part 3) : 2018 ISO 4032 Reviewed In : 2023 ISO 4032 (Fifth Revision) |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) | 0 | Apr, 2023 | Buy | |
| 20 |
IS 1364 (Part 4) : 2003 ISO 4035 Reviewed In : 2023 ISO 4035 (Fourth Revision) |
Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision) | 0 | Apr, 2023 | Buy | |
| 21 |
IS 1364 (Part 5) : 2002 ISO 4036:1999 Reviewed In : 2023 ISO 4036:1999 (Fourth Revision) |
Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision) | 0 | Apr, 2023 | Buy | |
| 22 |
IS 1364 (Part 6) : 2018 ISO 4033 Reviewed In : 2023 ISO 4033 (First Revision) |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision ) | 0 | Apr, 2023 | Buy | |
| 23 |
IS 1365 : 2022 ISO 19880-1 : 2020 ISO 19880-1 : 2020 (Sixth Revision) |
Slotted countersunk flat head screws Product grade A Fifth Revision of IS 1365 | 0 | ---- | Buy | |
| 24 |
IS 1366 : 2022 ISO 11199-1: 2021 ISO 11199-1: 2021 (Fourth Revision) |
Slotted Cheese Head Screws � Product Grade A (Fourth Revision of IS 1366) | 0 | ---- | Buy | |
| 25 |
IS 1367 (Part 1) : 2014 ISO 8992 : 2005 Reviewed In : 2024 ISO 8992 : 2005 (Fourth Revision) |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) | 0 | Apr, 2024 | Buy | |
| 26 |
IS 1367 (Part 2) : 2002 ISO 4759-1:2000 Reviewed In : 2023 ISO 4759-1:2000 (Third Revision) |
Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision) | 0 | Apr, 2023 | Buy | |
| 27 |
IS 1367 (Part 3) : 2017 ISO 898-1 : 2013 Reviewed In : 2024 ISO 898-1 : 2013 (Fifth Revision) |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) | 0 | Sep, 2024 | Buy | |
| 28 |
IS 1367 (Part 5) : 2018 IS 1367 Part 5 Reviewed In : 2023 IS 1367 Part 5 (Fourth Revision) |
Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision) | 0 | Oct, 2023 | Buy | |
| 29 |
IS 1367 (Part 6) : 2018 ISO 898-2 : 2012 Reviewed In : 2024 ISO 898-2 : 2012 (Fourth Revision) |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) | 0 | Apr, 2024 | Buy | |
| 30 |
IS 1367 (Part 7) : 1980 Reviewed In : 2023 (Second Revision) |
Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision) | 1 | Apr, 2023 | Buy | |
| 31 |
IS 1367 (Part 8) : 2020 ISO 2320 : 2015 Reviewed In : 2024 ISO 2320 : 2015 (Fifth Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision ) | 0 | Apr, 2024 | Buy | |
| 32 |
IS 1367 (Part 9/Sec 1) : 1993 ISO 6157-1 :1988 Reviewed In : 2024 ISO 6157-1 :1988 (Third Revision) |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 1 bolts, screws and studs for general applications (Third Revision) | 1 | Apr, 2024 | Buy | |
| 33 |
IS 1367 (Part 9/Sec 2) : 1993 ISO 6167-3 : 1988 Reviewed In : 2024 ISO 6167-3 : 1988 (Third Revision) |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 2 bolts, screws and studs for special applications (Third Revision) | 1 | Apr, 2024 | Buy | |
| 34 |
IS 1367 (Part 10) : 2002 ISO 6157-2:1995 Reviewed In : 2023 ISO 6157-2:1995 (Third Revision) |
Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision) | 0 | Apr, 2023 | Buy | |
| 35 |
IS 1367 (Part 11) : 2020 ISO 4042 : 2018 ISO 4042 : 2018 (Fourth Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision ) | 0 | ---- | Buy | |
| 36 |
IS 1367 (Part 12) : 1981 Reviewed In : 2024 (Second Revision) |
Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision) | 0 | Apr, 2024 | Buy | |
| 37 |
IS 1367 (Part 13) : 2020 ISO 10684 : 2004 Reviewed In : 2024 ISO 10684 : 2004 (Third Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) | 0 | Apr, 2024 | Buy | |
| 38 |
IS 1367 (Part 14/Sec 1) : 2023 (Fifth Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless Steel Fasteners Section 1 Bolts screws and studs with specified grades and property classes (Fifth Revision of IS 1367(Part 14 Sec 1)) | 0 | ---- | Buy | |
| 39 |
IS 1367 (Part 14/Sec 2) : 2023 (Fifth Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts with specified grades and property classes | 0 | ---- | Buy | |
| 40 |
IS 1367 (Part 14/Sec 3) : 2018 ISO 3506-3 : 2009 Reviewed In : 2023 ISO 3506-3 : 2009 (Fourth Revision) |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision | 0 | Oct, 2023 | Buy | |
| 41 |
IS 1367 (Part 14/Sec 4) : 2023 |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion Resistant Stainless Steel Fasteners Section 4 Tapping Screws | 0 | ---- | Buy | |
| 42 |
IS 1367 (Part 16) : 2002 ISO 8991:1986 Reviewed In : 2023 ISO 8991:1986 (Third Revision) |
Technical supply conditions for threaded steel fasteners: Part 16 designation system for fasteners (Third Revision) | 0 | Apr, 2023 | Buy | |
| 43 |
IS 1367 (Part 17) : 2023 (Fifth Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 17 Inspections Sampling and Acceptance Procedure Fifth Revision of IS 1367 Part 17 | 0 | ---- | Buy | |
| 44 |
IS 1367 (Part 18) : 1996 Reviewed In : 2021 (Third Revision) |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision) | 0 | Feb, 2021 | Download | |
| 45 |
IS 1367 (Part 19) : 1997 ISO 3800 : 1993 Reviewed In : 2024 ISO 3800 : 1993 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs | 0 | Apr, 2024 | Buy | |
| 46 |
IS 1367 (Part 20) : 1996 ISO 896-7 : 1992 Reviewed In : 2021 ISO 896-7 : 1992 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions - Mechanical properties: Part 20 torsional - Test and mlnimum torques for bolts and screws with nominal diameters 1 mm to 10 mm | 0 | Feb, 2021 | Buy | |
| 47 |
IS 1368 : 2018 ISO 4753 : 2011 Reviewed In : 2023 ISO 4753 : 2011 (Fourth Revision) |
Dimensions for ends of parts with external ISO metric threads (Fourth Revision) | 0 | Apr, 2023 | Buy | |
| 48 |
IS 1369 (Part 1) : 1993 IS0 3508 : 1976 Reviewed In : 2024 IS0 3508 : 1976 (Third Revision) |
Fasteners - Thread run - Outs and under - cuts: Part 1 dimensions for screw thread run - Outs for external ISO metric threads (Third Revision) | 0 | Apr, 2024 | Buy | |
| 49 |
IS 1369 (Part 2) : 1993 ISO 4755 : 1983 Reviewed In : 2024 ISO 4755 : 1983 (Third Revision) |
Fasteners - Thread run - Outs and undercuts: Part 2 dimensions for screw thread undercuts for external ISO metric threads (Third Revision ; | 0 | Apr, 2024 | Buy | |
| 50 |
IS 1369 (Part 3) : 2021 ISO/IEC TR 18121:2015 (Fourth Revision) |
Fasteners - Thread Run-Outs and Undercuts - Part 3 : Dimensions for Screw Thread Run-Outs and Undercuts for Internal Threads Blind Tapped Holes Third Revision | 0 | ---- | Buy | |
| 51 |
IS 13722 : 2002 ISO 8673 : 2012 Reviewed In : 2023 ISO 8673 : 2012 (Second Revision) |
Hexagon regular nuts (Style 1) with metric fine pitch thread - Product grades A and B (Second Revision) | 0 | Apr, 2023 | Buy | |
| 52 |
IS 13723 : 2018 ISO 8674 : 1999 Reviewed In : 2024 ISO 8674 : 1999 (Second Revision) |
Hexagon High Nuts (Style 2) With Metric Fine Pitch Thread - Product Grades A and B (Second Revision) | 0 | Apr, 2024 | Buy | |
| 53 |
IS 13724 : 2018 ISO 8675 : 1999 Reviewed In : 2024 ISO 8675 : 1999 (Second Revision) |
Hexagon thin nuts chamfered (Style 0) with metric fine pitch thread - Product grades A and B (Second Revision) | 0 | Apr, 2024 | Buy | |
| 54 |
IS 13725 : 2023 (Third Revision) |
Hexagon Head Screws With Metric Fine Pitch Thread Product Grades A and B Third Revision of 13275 | 0 | ---- | Buy | |
| 55 |
IS 13726 : 2023 (Third Revision) |
Hexagon head bolts with metric fine pitch thread � Product grades A and B (third revision) | 0 | ---- | Buy | |
| 56 |
IS 14394 : 1996 Reviewed In : 2021 |
Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36) | 0 | Feb, 2021 | Buy | |
| 57 |
IS 14894 : 2023 (First Revision) |
Fasteners � Hexagon head bolts of product grade B � Reduced shank (shank diameter ? pitch diameter) � Specification | 0 | ---- | Buy | |
| 58 |
IS 14962 (Part 1) : 2018 ISO 965-1 : 2013 Reviewed In : 2023 ISO 965-1 : 2013 (First Revision) |
ISO general purpose metric screw threads - Tolerances: Part 1 principles and basic data (First Revision) | 0 | Oct, 2023 | Buy | |
| 59 |
IS 14962 (Part 2) : 2001 ISO 965-2:1998 Reviewed In : 2023 ISO 965-2:1998 |
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality | 1 | Apr, 2023 | Buy | |
| 60 |
IS 14962 (Part 3) : 2022 ISO 11199-3:2005 ISO 11199-3:2005 (First Revision) |
ISO general purpose metric screw threads � Tolerances � Part 3: Limit deviations for screw threads | 0 | ---- | Buy | |
| 61 |
IS 14962 (Part 4) : 2023 (First Revision) |
ISO General purpose metric screw threads - Tolerances Part 4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (First revision of IS 14962( Part 4 ) ) | 0 | ---- | Buy | |
| 62 |
IS 14962 (Part 5) : 2001 ISO 965-5:1998 Reviewed In : 2023 ISO 965-5:1998 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing | 1 | Apr, 2023 | Buy | |
| 63 |
IS/ISO 1501 : 2009 Reviewed In : 2024 ISO 1501:2009 |
ISO miniature screw threads | 1 | Apr, 2024 | Buy | |
| 64 |
IS 15274 : 2021 IEC 61189-5:2006 (First Revision) |
Tolerances for fasteners Washers for bolts screws and nuts Product grades A C and F First Revision of IS 15274 ISO 4759-3 : 2016 ICS 2106030 | 0 | ---- | Buy | |
| 65 |
IS 15568 : 2005 ISO 10485:1991 Reviewed In : 2021 ISO 10485:1991 |
Cone proof load test on nuts | 0 | Feb, 2021 | Buy | |
| 66 |
IS 15569 : 2005 ISO 10484:1997 Reviewed In : 2021 ISO 10484:1997 |
Widening test on nuts | 0 | Feb, 2021 | Buy | |
| 67 |
IS 15581 : 2018 ISO 4161 : 2012 Reviewed In : 2023 ISO 4161 : 2012 (First Revision) |
Hexagon nuts with flange, style 2 - Coarse thread (First Revision) | 0 | Oct, 2023 | Buy | |
| 68 |
IS 15582 : 2018 ISO 4162 : 2012 Reviewed In : 2023 ISO 4162 : 2012 (First Revision) |
Hexagon Bolts with Flange - Small Series - Product Grade A with Driving Feature of Product Grade B ( First Revision) | 0 | Oct, 2023 | Buy | |
| 69 |
IS 15628 : 2022 IEC 62508 : 2010 (Second Revision) |
Slotted set screws with flat point - Specification First Revision of IS 15628 ICS 2106010 | 0 | ---- | Buy | |
| 70 |
IS 15629 : 2005 ISO 7434 : 1983 Reviewed In : 2021 ISO 7434 : 1983 |
Slotted set screws with cone point | 0 | Feb, 2021 | Buy | |
| 71 |
IS 15630 : 2005 ISO 7435 : 1983 Reviewed In : 2021 ISO 7435 : 1983 |
Slotted set screws with long dog point | 0 | Feb, 2021 | Buy | |
| 72 |
IS 15631 : 2005 ISO 7436 : 1983 Reviewed In : 2021 ISO 7436 : 1983 |
Slotted set screws with cup point | 0 | Feb, 2021 | Buy | |
| 73 |
IS 15705 : 2006 ISO 23429:2004 Reviewed In : 2024 ISO 23429:2004 |
Gauging of hexagon sockets | 0 | Apr, 2024 | Buy | |
| 74 |
IS/ISO 16426 : 2002 ISO 16426 Reviewed In : 2021 ISO 16426 |
Fasteners - Quality assurance system | 0 | Feb, 2021 | Buy | |
| 75 |
IS 17445 : 2020 ISO 15330 : 1999 Reviewed In : 2024 ISO 15330 : 1999 |
Fasteners — Preloading Test for the Detection of Hydrogen Embrittlement — Parallel Bearing Surface Method | 0 | Apr, 2024 | Buy | |
| 76 |
IS 17894 : 2022 ISO 7711-1:2021 ISO 7711-1:2021 |
Geometrical product specifications GPS - Geometrical tolerancing - General geometrical specifications and general size specifications | 0 | ---- | Buy | |
| 77 |
IS 1821 : 1987 ISO 273-1979 Reviewed In : 2024 ISO 273-1979 (Third Revision) |
Dimensions for clearance holes for bolts and screws (Third Revision) | 0 | Apr, 2024 | Buy | |
| 78 |
IS 18471 (Part 1) : 2023 |
Fasteners � Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head | 0 | ---- | Buy | |
| 79 |
IS 18471 (Part 2) : 2023 |
Fasteners � Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head | 0 | ---- | Buy | |
| 80 |
IS 18471 (Part 3) : 2023 |
Fasteners � Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head | 0 | ---- | Buy | |
| 81 |
IS 18476 : 2023 |
Fasteners � Hexagon Washer Head Drilling Screws with Tapping Screw Thread | 0 | ---- | Buy | |
| 82 |
IS 18480 (Part 1) : 2023 |
Cross Recessed Tapping Screws: Part 1 Pan Head | 0 | ---- | Buy | |
| 83 |
IS 18480 (Part 2) : 2023 |
Cross Recessed Tapping Screws Part 2 Countersunk Flat Head | 0 | ---- | Buy | |
| 84 |
IS 18480 (Part 3) : 2023 |
Cross Recessed Tapping Screw Part 3 Raised Countersunk Oval Head | 0 | ---- | Buy | |
| 85 |
IS 18507 : 2024 |
Drywall Screws � Specification | 0 | ---- | Buy | |
| 86 |
IS 18508 : 2024 |
Chipboard Screws � Specification | 0 | ---- | Buy | |
| 87 |
IS 18509 : 2024 |
Cross-recessed Countersunk Head Wood Screws � Specification | 0 | ---- | Buy | |
| 88 |
IS 1862 : 1975 Reviewed In : 2021 (Second Revision) |
Specification for studs (Second Revision) | 1 | Feb, 2021 | Download | |
| 89 |
IS 18741 : 2024 |
Concrete Nails � Specification | 0 | ---- | Buy | |
| 90 |
IS 1928 : 1961 Reviewed In : 2021 |
Specification for boiler rivets (12 To 48 Mm Diameter) | 0 | Feb, 2021 | Download | |
| 91 |
IS 1929 : 1982 Reviewed In : 2021 (First Revision) |
Specification for hot forged steel rivets for hot closing (12 To 36 Mm Diameter) | 4 | Feb, 2021 | Download | |
| 92 |
IS 2016 : 1967 Reviewed In : 2021 (First Revision) |
Specification for plain washers (First Revision) | 4 | Feb, 2021 | Download | |
| 93 |
IS 207 : 1964 Reviewed In : 2021 (First Revision) |
Specification for gate and shutter hooks and eyes (Revised) | 2 | Feb, 2021 | Download | |
| 94 |
IS 2102 (Part 1) : 1993 ISO 2768-1 : 1989 Reviewed In : 2024 ISO 2768-1 : 1989 (Third Revision) |
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) | 0 | Apr, 2024 | Buy | |
| 95 |
IS 2155 : 1982 Reviewed In : 2021 (First Revision) |
Specification for cold forged solid steel rivets for hot closing (6 To 16 Mm Diameter) (First Revision) | 1 | Feb, 2021 | Download | |
| 96 |
IS 2186 : 1985 Reviewed In : 2021 (First Revision) |
ISO metric external screw threads for interference fit applications (First Revision) | 0 | Feb, 2021 | Download | |
| 97 |
IS 2232 : 1967 Reviewed In : 2021 (First Revision) |
Specification for slotted and castle nuts (First Revision) | 3 | Feb, 2021 | Download | |
| 98 |
IS 2269 : 2006 ISO 4762:2004 Reviewed In : 2021 ISO 4762:2004 (Fifth Revision) |
Hexagon socket head cap screws (Fifth Revision) | 0 | Feb, 2021 | Buy | |
| 99 |
IS 2393 : 2010 ISO 2338 : 1997 Reviewed In : 2021 ISO 2338 : 1997 (Fifth Revision) |
Parallel pins, of unhardened steel and austenitic stainless steel (Third Revision) | 0 | Feb, 2021 | Buy | |
| 100 |
IS 2473 : 1975 Reviewed In : 2024 (First Revision) |
Dimensions for centre holes (First Revision) | 2 | Sep, 2024 | Download | |
| 101 |
IS 2540 : 2008 Reviewed In : 2019 (First Revision) |
Dimensions for threaded centre holes (First Revision) | 0 | Dec, 2019 | Download | |
| 102 |
IS 2585 : 2006 Reviewed In : 2021 (First Revision) |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 103 |
IS 2609 : 1972 Reviewed In : 2024 (First Revision) |
Specification for coach bolts (First Revision) | 3 | Apr, 2024 | Download | |
| 104 |
IS 2636 : 1972 Reviewed In : 2021 (First Revision) |
Specification for wing nuts (First Revision) | 0 | Feb, 2021 | Download | |
| 105 |
IS 2638 : 1974 Reviewed In : 2021 (First Revision) |
Specification for flat split cotters (First Revision) | 0 | Feb, 2021 | Download | |
| 106 |
IS 2643 : 2005 ISO 228-1:2000 Reviewed In : 2021 ISO 228-1:2000 (Third Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) | 0 | Feb, 2021 | Buy | |
| 107 |
IS 2687 : 1991 Reviewed In : 2021 (Second Revision) |
Capnuts - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 108 |
IS 2769 : 1969 Reviewed In : 2024 (First Revision) |
Sizes for squares and square holes for general engineering purposes (First Revision | 0 | Sep, 2024 | Download | |
| 109 |
IS 2907 : 1998 Reviewed In : 2019 (First Revision) |
Non - Ferrous rivets - Specification (First Revision) | 0 | Dec, 2019 | Download | |
| 110 |
IS 2998 : 1982 Reviewed In : 2019 (First Revision) |
Specification for cold forged steel rivets for cold closing (1 To 16 mm Diameter) (First Revision) | 3 | Dec, 2019 | Download | |
| 111 |
IS 3063 : 1994 Reviewed In : 2021 (Second Revision) |
Fasteners - Single coil rectangular section spring lock washers specification (Second Revision) | 1 | Feb, 2021 | Download | |
| 112 |
IS 3403 : 1981 Reviewed In : 2024 |
Dimensions for knurls (First Revision) | 0 | Sep, 2024 | Download | |
| 113 |
IS 3406 (Part 1) : 1986 Reviewed In : 2024 (Second Revision) |
Dimensions for countersinks and counterbores: Part 1 countersinks (Second Revision) | 0 | Sep, 2024 | Download | |
| 114 |
IS 3406 (Part 2) : 2014 Reviewed In : 2019 (Third Revision) |
Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision) | 0 | Dec, 2019 | Download | |
| 115 |
IS 3428 : 2009 Reviewed In : 2019 (Second Revision) |
Dimensions for relief grooves (Second Revision) | 0 | Dec, 2019 | Download | |
| 116 |
IS 3457 : 2009 Reviewed In : 2024 (First Revision) |
Radii for rounding for general engineering purposes (Second Revision) | 0 | Apr, 2024 | Download | |
| 117 |
IS 3458 : 2018 ISO 1119 : 2011 Reviewed In : 2023 ISO 1119 : 2011 (Third Revision) |
Conical tapers and taper angles for general engineering purposes (Third Revision) | 0 | Apr, 2023 | Buy | |
| 118 |
IS 3460 : 1991 Reviewed In : 2021 (Second Revision) |
Knurled nuts - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 119 |
IS 3468 : 1991 Reviewed In : 2021 (Second Revision) |
Pipe nuts - Specification (Second Revision) | 1 | Feb, 2021 | Download | |
| 120 |
IS 3524 (Part 1) : 1982 Reviewed In : 2021 (First Revision) |
Specification for threaded taper pins: Part 1 with internal threads (First Revision) | 0 | Feb, 2021 | Download | |
| 121 |
IS 3524 (Part 2) : 1982 Reviewed In : 2021 (First Revision) |
Specification for threaded taper pins: Part 2 with external threads (First Revision) | 0 | Feb, 2021 | Download | |
| 122 |
IS 3640 : 1982 Reviewed In : 2021 (First Revision) |
Specification for hexagon fit bolts (First Revision) | 1 | Feb, 2021 | Download | |
| 123 |
IS 3726 : 2003 Reviewed In : 2024 (Second Revision) |
Thumb screws - Specification (Second Revision) | 0 | Apr, 2024 | Download | |
| 124 |
IS 3727 : 1966 Reviewed In : 2021 |
Specification for wing screws | 0 | Feb, 2021 | Download | |
| 125 |
IS 3757 : 1985 Reviewed In : 2019 (Second Revision) |
Specification for high strength structural bolts (Second Revision) | 2 | Dec, 2019 | Download | |
| 126 |
IS 3974 : 1967 Reviewed In : 2021 |
Specification for bifurcated rivets for general purposes | 0 | Feb, 2021 | Download | |
| 127 |
IS 4040 : 1998 Reviewed In : 2024 (First Revision) |
Fasteners - Solid drilled tubular and semi - Tubular rivets - Specification (First Revision) | 2 | Apr, 2024 | Download | |
| 128 |
IS 4172 : 2005 ISO 885:2000 Reviewed In : 2021 ISO 885:2000 (First Revision) |
General purpose bolts and screws - Metric series - Radii under the head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 129 |
SP 42 : 2008 Reviewed In : 2021 (First Revision) |
Survey of screw threads (First Revision) | 0 | Feb, 2021 | Download | |
| 130 |
IS 4206 : 2012 ISO 888 : 2012 Reviewed In : 2024 ISO 888 : 2012 (Second Revision) |
Dimensions for nominal lengths and thread lengths for bolts, screws and studs (Second Revision) | 0 | Apr, 2024 | Buy | |
| 131 |
IS 4218 (Part 1) : 2001 ISO 68-1:1998 Reviewed In : 2023 ISO 68-1:1998 (Second Revision) |
ISO general purpose metric screw threads: Part 1 basic profile - second revision) | 1 | Apr, 2023 | Buy | |
| 132 |
IS 4218 (Part 2) : 2001 ISO 261:1998 Reviewed In : 2023 ISO 261:1998 (Second Revision) |
ISO general purpose metric screw threads: Part 2 general plan (Second Revision) | 0 | Apr, 2023 | Buy | |
| 133 |
IS 4218 (Part 3) : 1999 ISO 724 : 1993 Reviewed In : 2021 ISO 724 : 1993 (Second Revision) |
ISO general purpose metric screw threads: Part 3 basic dimensions (Second Revision) | 1 | Feb, 2021 | Buy | |
| 134 |
IS 4218 (Part 4) : 2001 ISO 262:1998 Reviewed In : 2023 ISO 262:1998 (Second Revision) |
ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision) | 0 | Apr, 2023 | Buy | |
| 135 |
IS 4499 : 1968 Reviewed In : 2021 |
Dimensions for depth of holes for studs | 1 | Feb, 2021 | Download | |
| 136 |
IS 451 : 1999 Reviewed In : 2021 (Third Revision) |
Technical supply conditions for wood screws (Third Revision) | 0 | Feb, 2021 | Download | |
| 137 |
IS 4695 (Part 1) : 2003 Reviewed In : 2021 (Second Revision) |
General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision) | 0 | Feb, 2021 | Download | |
| 138 |
IS 4695 (Part 2) : 2003 Reviewed In : 2021 (Second Revision) |
General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision) | 0 | Feb, 2021 | Download | |
| 139 |
IS 4696 (Part 1) : 2004 Reviewed In : 2019 (First Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 1 THREAD PROFILES (Second Revision) | 0 | Dec, 2019 | Download | |
| 140 |
IS 4696 (Part 2) : 2004 Reviewed In : 2019 (First Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 2 PITCH DIAMETER COMBINATIONS (Second Revision) | 0 | Dec, 2019 | Download | |
| 141 |
IS 4696 (Part 3) : 2004 Reviewed In : 2019 (Second Revision) |
Dimensions for metric buttress threads: Part 3 basic dimensions (Second Revision) | 0 | Dec, 2019 | Download | |
| 142 |
IS 4696 (Part 4) : 2005 Reviewed In : 2021 (First Revision) |
Dimensions for metric buttress threads: Part 4 tolerancing system (Second Revision) | 0 | Feb, 2021 | Download | |
| 143 |
IS 4732 : 1968 Reviewed In : 2021 |
Specification for rivets for shipbuilding | 0 | Feb, 2021 | Download | |
| 144 |
IS 4762 : 2002 Reviewed In : 2021 (First Revision) |
FASTENERS — WORM DRIVE HOSE CLAMPS FOR GENERAL PURPOSES — SPECIFICATION ( Second Revision ) | 4 | Feb, 2021 | Download | |
| 145 |
IS 5368 : 1969 Reviewed In : 2021 |
Specification for thin slotted and castle nuts (Dia Range 6 To 52 Mm) | 1 | Feb, 2021 | Download | |
| 146 |
IS 5370 : 1969 Reviewed In : 2021 |
Specification for plain washers with outside diameter 3 x inside diameter | 1 | Feb, 2021 | Download | |
| 147 |
IS 5371 : 1982 Reviewed In : 2021 (First Revision) |
Specification for multi - Tooth lock washers (First Revision) | 0 | Feb, 2021 | Download | |
| 148 |
IS 5372 : 1975 Reviewed In : 2021 (First Revision) |
Specification for taper washers for channels (ISMC) (First Revision) | 0 | Feb, 2021 | Download | |
| 149 |
IS 5373 : 1969 Reviewed In : 2021 |
Specification for square washers for wood fastenings | 1 | Feb, 2021 | Download | |
| 150 |
IS 5374 : 1975 Reviewed In : 2021 (First Revision) |
Specification for taper washers for I - Beams (Ismb) (First Revision) | 0 | Feb, 2021 | Download | |
| 151 |
IS/ISO 5408 : 2009 Reviewed In : 2024 ISO 5408 : 2009 |
Screw threads - Vocabulary | 0 | Apr, 2024 | Buy | |
| 152 |
IS 549 : 2005 ISO 1234 : 1997 Reviewed In : 2021 ISO 1234 : 1997 (Second Revision) |
Split pins - Specification (Third Revision) | 4 | Feb, 2021 | Buy | |
| 153 |
IS 554 : 1999 ISO 7-11 : 1994 Reviewed In : 2024 ISO 7-11 : 1994 (Fourth Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) | 1 | Apr, 2024 | Buy | |
| 154 |
IS 5554 : 1991 Reviewed In : 2021 (First Revision) |
Lock washers with lug - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 155 |
IS 5556 : 1991 Reviewed In : 2021 (First Revision) |
Serratedlockwashers - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 156 |
IS 5624 : 2021 4671:2022 4671:2022 (Second Revision) |
FOUNDATION BOLTS SPECIFICATION Second Revision | 0 | ---- | Buy | |
| 157 |
IS 5957 : 2003 ISO 1478:1999 Reviewed In : 2023 ISO 1478:1999 (Second Revision) |
Screw threads for thread forming tapping screws dimensions (Second Revision) | 0 | Apr, 2023 | Buy | |
| 158 |
IS 6094 (Part 1) : 2006 ISO 4026:2003 Reviewed In : 2024 ISO 4026:2003 (Third Revision) |
Hexagon socket set screws: Part 1 with flat point (Third Revision) | 0 | Apr, 2024 | Buy | |
| 159 |
IS 6094 (Part 2) : 2006 ISO 4027:2003 Reviewed In : 2021 ISO 4027:2003 |
Hexagon socket set screws: Part 2 with cone point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 160 |
IS 6094 (Part 3) : 2006 ISO 4028:2003 Reviewed In : 2021 ISO 4028:2003 |
Hexagon socket set screws: Part 3 with dog point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 161 |
IS 6094 (Part 4) : 2006 ISO 4029:2003 Reviewed In : 2021 ISO 4029:2003 (Third Revision) |
Hexagon socket set screws: Part 4 with cup point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 162 |
IS 6101 : 2018 ISO 1580 : 2011 Reviewed In : 2023 ISO 1580 : 2011 (Third Revision) |
Slotted pan head screws - Product grade a (Third Revision) | 0 | Oct, 2023 | Buy | |
| 163 |
IS 6113 : 1970 Reviewed In : 2021 |
Specification for aluminium fasteners for buildin - g purposes | 0 | Feb, 2021 | Download | |
| 164 |
IS 6610 : 1972 Reviewed In : 2021 |
Specification for heavy washers for steel structures | 0 | Feb, 2021 | Download | |
| 165 |
IS 6623 : 2004 Reviewed In : 2021 (Second Revision) |
High Strength Structural Nuts | 1 | Feb, 2021 | Download | |
| 166 |
IS 6639 : 1972 Reviewed In : 2021 |
Specification for hexagon bolts for steel structures | 5 | Feb, 2021 | Download | |
| 167 |
IS 6649 : 1985 Reviewed In : 2021 (First Revision) |
Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision) | 1 | Feb, 2021 | Download | |
| 168 |
IS 6688 : 2005 ISO 2339:1986 Reviewed In : 2021 ISO 2339:1986 (First Revision) |
Taper pins, unhardened (Second Revision) | 0 | Feb, 2021 | Buy | |
| 169 |
IS 6689 : 2003 ISO 8734:1997 Reviewed In : 2024 ISO 8734:1997 (First Revision) |
Parallel pins of hardened steel and martensitic stainless steel (Dowel Pins) (First Revision) | 0 | Apr, 2024 | Buy | |
| 170 |
IS 6730 : 1972 Reviewed In : 2021 |
Specification for felt nails | 0 | Feb, 2021 | Download | |
| 171 |
IS 6732 : 1972 Reviewed In : 2021 |
Specification for double point nails | 0 | Feb, 2021 | Download | |
| 172 |
IS 6733 : 1972 Reviewed In : 2021 |
Specification for wall and roofing nails | 1 | Feb, 2021 | Download | |
| 173 |
IS 6734 : 1972 Reviewed In : 2021 |
Specification for cut lath and lath nails | 0 | Feb, 2021 | Download | |
| 174 |
IS 6735 : 1994 Reviewed In : 2019 (First Revision) |
Fasteners - Spring lock wasixers for screws with cylindrical heads - Specification (First Revision) | 1 | Dec, 2019 | Download | |
| 175 |
IS 6736 : 1972 Reviewed In : 2021 |
Specification for slotted raised countersunk head wood screws | 2 | Feb, 2021 | Download | |
| 176 |
IS 6738 : 1972 Reviewed In : 2021 |
Specification for panel pins and lost head nails | 1 | Feb, 2021 | Download | |
| 177 |
IS 6739 : 1972 Reviewed In : 2021 |
Slotted Round Head Wood Screws | 2 | Feb, 2021 | Download | |
| 178 |
IS 6755 : 1980 Reviewed In : 2021 (First Revision) |
Specification for double coil helical spring washers (First Revision) | 0 | Feb, 2021 | Download | |
| 179 |
IS 6760 : 1972 Reviewed In : 2021 |
Specification for slotted countersunk head wood screws | 2 | Feb, 2021 | Download | |
| 180 |
IS 6761 : 2023 (Third Revision) |
Fasteners Hexagon Socket Countersunk Head Screws with Reduced Loadability Third Revision of IS 6761 | 0 | ---- | Buy | |
| 181 |
IS 6821 : 1973 Reviewed In : 2021 |
Methods for sampllNg non - Threaded fasteners | 2 | Feb, 2021 | Download | |
| 182 |
IS 6862 : 2005 ISO 2340 : 1986 Reviewed In : 2021 ISO 2340 : 1986 (Second Revision) |
Clews pins without head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 183 |
IS 6863 : 2005 ISO 2341:1986 Reviewed In : 2021 ISO 2341:1986 (Second Revision) |
Clevis pins with head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 184 |
IS 7002 : 2018 ISO 7040 : 2012 Reviewed In : 2023 ISO 7040 : 2012 (Third Revision) |
Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision) | 0 | Oct, 2023 | Buy | |
| 185 |
IS 7008 (Part 1) : 2021 ISO 16140-6 : 2019 ISO 16140-6 : 2019 (Third Revision) |
ISO metric trapezoidal screw threads Part 1 Basic and design profile Third Revision IS 7008 Part 1 ISO 2901 : 2016 ICS 2106010 | 0 | ---- | Buy | |
| 186 |
IS 7008 (Part 2) : 2021 (Second Revision) |
ISO metric trapezoidal screw threads Part 2 General plan Second Revision IS 7008 Part 2 ISO 2902 : 2016 ICS 2106010 | 0 | ---- | Download | |
| 187 |
IS 7008 (Part 3) : 2023 (Second Revision) |
ISO METRIC TRAPEZOIDAL SCREW THREADS PART 3 BASIC DIMENSIONS (Second Revision of IS 7008(Part 3)) | 0 | ---- | Buy | |
| 188 |
IS 7008 (Part 4) : 2021 (Third Revision) |
ISO metric trapezoidal screw threads Part 4 Tolerances Third Revision IS 7008 Part 4 ISO 2903 : 2016 ICS 2106010 | 0 | ---- | Download | |
| 189 |
IS 7169 : 2018 ISO 1483 : 2011 Reviewed In : 2023 ISO 1483 : 2011 (Second Revision) |
Slotted raised countersunk (Oval) head tapping screws (Second Revision) | 0 | Oct, 2023 | Buy | |
| 190 |
IS 7170 : 2018 ISO 1482 : 2011 Reviewed In : 2023 ISO 1482 : 2011 (Second Revision) |
Slotted countersunk (Flat) head tapping screws (Second Revision) | 0 | Oct, 2023 | Buy | |
| 191 |
IS 7173 : 2018 ISO 1481 : 2011 Reviewed In : 2023 ISO 1481 : 2011 (Second Revision) |
Slotted pan head tapping screws (Second Revision) | 0 | Oct, 2023 | Buy | |
| 192 |
IS 7178 : 2018 ISO 2702 : 2011 Reviewed In : 2024 ISO 2702 : 2011 (Fourth Revision) |
Heat - Treated steel tapping screws - Mechanical properties (Fourth Revision) | 0 | Apr, 2024 | Buy | |
| 193 |
IS 723 : 1972 Reviewed In : 2021 (First Revision) |
Specification for steel countersunk head wire nails (First Revision) | 3 | Feb, 2021 | Download | |
| 194 |
IS 723 : 2023 (Second Revision) |
Steel Countersunk Head Wire Nails � Specification ( Second Revision ) | 0 | ---- | Buy | |
| 195 |
IS 724 : 2023 (Second Revision) |
Mild Steel and Brass Cup, Ruler and Square Hooks and Screw Eyes � Specification | 0 | ---- | Buy | |
| 196 |
IS 725 : 1961 Reviewed In : 2021 |
Specification for copper wire nails (Revised) | 0 | Feb, 2021 | Download | |
| 197 |
IS 730 : 2021 ISO 22915 Part 9 (Third Revision) |
Specification for Hook Bolts for Corrugated Sheet Roofing | 0 | ---- | Buy | |
| 198 |
IS 7368 : 2005 ISO 8744:1997 Reviewed In : 2021 ISO 8744:1997 (Second Revision) |
Grooved pins - Full - Length taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 199 |
IS 7383 : 2005 ISO 8742:1997 Reviewed In : 2021 ISO 8742:1997 (Second Revision) |
Grooved puns - One - Third - Length centre grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 200 |
IS 7384 : 2005 ISO 8739:1997 Reviewed In : 2021 ISO 8739:1997 (Second Revision) |
Grooved pins - Full - Length parallel grooved, with pilot (Second Revision) | 0 | Feb, 2021 | Buy | |
| 201 |
IS 7385 : 2005 ISO 8745:1997 Reviewed In : 2021 ISO 8745:1997 (Second Revision) |
Grooved pins - Half - Length taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 202 |
IS 7386 : 2005 ISO 8741:1997 Reviewed In : 2021 ISO 8741:1997 (Second Revision) |
Grooved pins - Half - Length reverse taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 203 |
IS 7478 : 2011 ISO 4757 : 1983 Reviewed In : 2021 ISO 4757 : 1983 (Second Revision) |
Cross recesses for screws (Second Revision) | 0 | Feb, 2021 | Buy | |
| 204 |
IS 7483 : 2018 ISO 7045 : 2011 Reviewed In : 2023 ISO 7045 : 2011 (Third Revision) |
Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision) | 0 | Oct, 2023 | Buy | |
| 205 |
IS 7485 (Part 1) : 2018 ISO 7046-1 : 2011 Reviewed In : 2023 ISO 7046-1 : 2011 (Third Revision) |
Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision) | 0 | Oct, 2023 | Buy | |
| 206 |
IS 7485 (Part 2) : 2018 ISO 7046-2 : 2011 Reviewed In : 2023 ISO 7046-2 : 2011 (Third Revision) |
Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision) | 0 | Oct, 2023 | Buy | |
| 207 |
IS 7486 : 2018 ISO 7047 : 2011 Reviewed In : 2023 ISO 7047 : 2011 (Third Revision) |
Raised countersunk head screws (Common Head Style) with type H or type Z cross recess - Product grade A (Third Revision) | 0 | Oct, 2023 | Buy | |
| 208 |
IS 7519 : 1974 Reviewed In : 2021 |
Specification for hammer drive screws | 1 | Feb, 2021 | Download | |
| 209 |
IS 7615 : 2003 Reviewed In : 2024 (Second Revision) |
System of cone tolerance for conical workpiece from c = 1:3 to 1:500 and lengths from 6 to 630 mm (Second Revision) | 0 | Apr, 2024 | Download | |
| 210 |
IS 7684 : 1975 Reviewed In : 2021 |
LIMITS OF SIZES FOR ISO METRIC TRAPEZOIDAL NUT THREADS DIAMETER RANGE 8 TO 100 mm | 1 | Feb, 2021 | Download | |
| 211 |
IS 7685 : 1975 Reviewed In : 2021 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 8 To 100 Mm) | 1 | Feb, 2021 | Download | |
| 212 |
IS 7726 : 1975 Reviewed In : 2024 |
Limits of sizes for ISO metric trapezoidal nut threads (Diameter Range 105 To 300 Mm) | 1 | Sep, 2024 | Download | |
| 213 |
IS 7727 : 1975 Reviewed In : 2024 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 105 To 300 Mm) | 1 | Sep, 2024 | Download | |
| 214 |
IS 7790 : 1991 Reviewed In : 2021 (First Revision) |
Domed cap nuts - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 215 |
IS 7795 : 2004 Reviewed In : 2021 (First Revision) |
Hexagon nuts with collar - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 216 |
IS 7800 : 1990 Reviewed In : 2021 (First Revision) |
Thread cutting tapping screwsscrew threads and ends - Dimensions (First Revision) | 0 | Feb, 2021 | Download | |
| 217 |
IS 8033 : 1976 Reviewed In : 2021 |
Specification for round washers with square hole for wood fastenings | 2 | Feb, 2021 | Download | |
| 218 |
IS 8068 : 1976 Reviewed In : 2021 |
Specification for tab washers | 1 | Feb, 2021 | Download | |
| 219 |
IS 8070 : 1991 Reviewed In : 2021 (First Revision) |
Screws - Slotted capstan (Tommy bolts) - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 220 |
IS 8217 : 1976 Reviewed In : 2021 |
Dimensions of pipe thread runouts and undercuts | 0 | Feb, 2021 | Download | |
| 221 |
IS 8351 : 1977 Reviewed In : 2021 |
Specification for spiral pins (Heavy Duty Type) | 0 | Feb, 2021 | Download | |
| 222 |
IS 8352 : 1977 Reviewed In : 2021 |
Specification for flat countersunk square neck bolts | 0 | Feb, 2021 | Download | |
| 223 |
IS 8353 : 1977 Reviewed In : 2021 |
Specification for flat countersunk nib bolts | 0 | Feb, 2021 | Download | |
| 224 |
IS 8379 : 1977 Reviewed In : 2021 |
Specification for spiral pins (Medium - Duty Type) | 0 | Feb, 2021 | Download | |
| 225 |
IS 8412 : 1977 Reviewed In : 2021 |
Specification for slotted countersunk head bolts for steel structures | 0 | Feb, 2021 | Download | |
| 226 |
IS 8535 : 2020 ISO 1891 : 2009 Reviewed In : 2024 ISO 1891 : 2009 (Second Revision) |
Fasteners — Terminology ( Second Revision ) | 0 | Apr, 2024 | Buy | |
| 227 |
IS 8536 : 2021 (Second Revision) |
Fasteners - Bolts screws studs and nuts - Symbols and designation of dimensions First Revision IS 8536 | 0 | ---- | Download | |
| 228 |
IS 866 : 1957 Reviewed In : 2021 |
Specification forTinmens Rivets | 0 | Feb, 2021 | Download | |
| 229 |
IS 8721 : 1978 Reviewed In : 2021 |
Specification for fish bolts (Cup Oval Neck Bolts) for collieries | 0 | Feb, 2021 | Download | |
| 230 |
IS 8722 : 1978 Reviewed In : 2021 |
Specification for fish bolts with square head | 0 | Feb, 2021 | Download | |
| 231 |
IS 8788 : 2002 Reviewed In : 2024 (Second Revision) |
Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision) | 0 | Sep, 2024 | Download | |
| 232 |
IS 8822 : 1978 Reviewed In : 2021 |
Specification for slotted mushroom head roofing bolts | 0 | Feb, 2021 | Download | |
| 233 |
IS 8841 : 1978 Reviewed In : 2024 |
Recommendations for limits and flTs for sizes above 3 i50 mm up to io 000 mm | 0 | Apr, 2024 | Download | |
| 234 |
IS 8856 : 1991 Reviewed In : 2019 (First Revision) |
Hexagon weld nuts - Specification (First Revision) | 1 | Dec, 2019 | Download | |
| 235 |
IS 8869 : 1978 Reviewed In : 2021 |
Specification for washers for corrugated sheet roofing | 0 | Feb, 2021 | Download | |
| 236 |
IS 8911 : 2018 ISO 2010 : 2011 Reviewed In : 2023 ISO 2010 : 2011 (Second Revision) |
Slotted raised countersunk head screws - Product grade A (Second Revision) | 0 | Oct, 2023 | Buy | |
| 237 |
IS 919 (Part 1) : 2014 ISO 286-1 : 2010 Reviewed In : 2024 ISO 286-1 : 2010 |
Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision) | 1 | Apr, 2024 | Buy | |
| 238 |
IS 919 (Part 2) : 2014 ISO 286-2 : 2010 Reviewed In : 2024 ISO 286-2 : 2010 (First Revision) |
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision) | 1 | Apr, 2024 | Buy | |
| 239 |
IS 9519 : 2005 ISO 272:1982 Reviewed In : 2021 ISO 272:1982 (First Revision) |
Fasteners - Hexagon products - Width across flats (First Revision) | 0 | Feb, 2021 | Buy | |
| 240 |
IS 9549 (Part 1) : 2014 ISO 7378 : 1983 Reviewed In : 2024 ISO 7378 : 1983 (First Revision) |
Fasteners -- Bolts, screws and studs: Part 1 Split pin holes and wire holes (first revision) | 0 | Apr, 2024 | Buy | |
| 241 |
IS 9549 (Part 2) : 2014 Reviewed In : 2024 (First Revision) |
Fasteners - Bolts, screws and studs - Head slots for bolts (First Revision) | 0 | Apr, 2024 | Download | |
| 242 |
IS 9965 : 1981 Reviewed In : 2024 |
Limits of sizes for ISO metric external screw threads for high temperature applications | 0 | Apr, 2024 | Download |