| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 902 : 1992 |
Suction hose couplings for fire fighting purposes - Specification (Third Revision) |
CED 22 |
| 2 |
IS 4947 : 2006 |
GAS CARTRIDGES FOR USE IN FIRE EXTINGUISHERS - SPECIFICATION (Third Revision) |
CED 22 |
| 3 |
IS 1703 : 2000 |
Water fittings - copper alloy float valves (horizontal plunger type) - Specification (fourth revision) |
CED 3 |
| 4 |
IS 11931 : 1987 |
Specification for Sewer Cleaning Metal Rods |
CED 24 |
| 5 |
IS 9798 : 2013 |
Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision) |
MED 16 |
| 6 |
IS 1361 : 1978 |
Specification for Steel Windows for Industrial Buildings |
CED 11 |
| 7 |
IS 1038 : 1983 |
Specification For Steel Doors, Windows And Ventilators |
CED 11 |
| 8 |
IS 12665 : Part 3 : 1989 |
Press Working Tools - Shanks:part 3 Shanks with Screwed Shaft |
PGD 4 |
| 9 |
IS 2670 : 1991 |
Thread milling cutter shell type specification (first revision) |
PGD 32 |
| 10 |
IS 6171 : 1992 |
Screwing taps - Technical supply conditions (Second Revision) |
PGD 32 |
| 11 |
IS 6173 : Part 1 : 1992 |
Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision) |
PGD 32 |
| 12 |
IS 6175 : Part 1 : 1992 |
Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision) |
PGD 32 |
| 13 |
IS 6175 : Part 2 : 1992 |
Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision) |
PGD 32 |
| 14 |
IS 6175 : Part 3 : 1992 |
Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision) |
PGD 32 |
| 15 |
IS 6175 : Part 4 : 1991 |
Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification |
PGD 32 |
| 16 |
IS 6175 : Part 5 : 1991 |
Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification |
PGD 32 |
| 17 |
IS 10952 : 1984 |
Recommendations for drills for use prior to tapping screw threads |
PGD 32 |
| 18 |
IS 10749 : 1983 |
Specification for swivel head nut for screw type mounts in pusher legs |
PGD 8 |
| 19 |
IS 2692 : 1989 |
Ferrules for water services - specification (second revision) |
CED 3 |
| 20 |
IS 4009 : Part 2 : 1981 |
Specification for grease nlpples: Part 2 conical head grease nipples (First Revision) |
PGD 19 |
| 21 |
IS 3311 : 1979 |
Waste Plug And Its Accessories For Sinks And Wash-basins |
CED 3 |
| 22 |
IS 9762 : 1994 |
Specification for polyethylene floats (Spherical) for float valves (first revision) |
CED 3 |
| 23 |
IS 10131 : 1992 |
Link chain ends and chain bows for bucket elevators - Specification (First Revision) |
MED 14 |
| 24 |
IS 7285 : Part 1 : 2018 |
Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision) |
MED 16 |
| 25 |
IS 13065 : 1991 |
Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements |
MED 7 |
| 26 |
IS 5740 : 1996 |
Household sewing machines - Memorandum on screw threads for sewing machine components (First Revision) |
MED 29 |
| 27 |
IS 13219 : 1992 |
Rock bolts for mines (Cement Grouted) - General requirements |
MED 8 |
| 28 |
IS 6680 : 1992 |
Railway carriagefans - Specification (First Revision) |
ETD 32 |
| 29 |
IS 7587 : Part 6 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 6 safety detaching hooks (4 Plates Type) 80 and 100 kN capacity (First Revision) |
MED 8 |
| 30 |
IS 7587 : Part 3 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 3 shackles and pins (First Revision) |
MED 8 |
| 31 |
IS 7587 : Part 2 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 2 cappels (First Revision) |
MED 8 |
| 32 |
IS 10238 : 2001 |
Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision) |
PGD 37 |
| 33 |
IS 10288 : 1982 |
Specification for belt - Fasteners, plate type |
PGD 40 |
| 34 |
IS 12427 : 2001 |
Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision) |
PGD 37 |
| 35 |
IS 13096 : 2000 |
Fasteners - Hexagon nuts with specified proof load values - Fine pitch thread - Mechanical properties (First Revision) |
PGD 37 |
| 36 |
IS 6832 : 1985 |
Specification for fixing screws and fixing washers for buckets for bucket elevators (First Revision) |
MED 6 |
| 37 |
IS 1369 : Part 1 : 1993 |
Fasteners - Thread run - Outs and under - cuts: Part 1 dimensions for screw thread run - Outs for external ISO metric threads (Third Revision) |
PGD 37 |
| 38 |
IS 14394 : 1996 |
Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36) |
PGD 37 |
| 39 |
IS 4190 : 1984 |
Specification for eye bolts with collars (First Revision) |
MED 14 |
| 40 |
IS 15100 : 2018 |
Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) |
MED 16 |
| 41 |
IS 15629 : 2005 |
Slotted set screws with cone point |
PGD 37 |
| 42 |
IS 15630 : 2005 |
Slotted set screws with long dog point |
PGD 37 |
| 43 |
IS 15631 : 2005 |
Slotted set screws with cup point |
PGD 37 |
| 44 |
IS 2269 : 2006 |
Hexagon socket head cap screws (Fifth Revision) |
PGD 37 |
| 45 |
IS 2585 : 2006 |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) |
PGD 37 |
| 46 |
IS 3726 : 2003 |
Thumb screws - Specification (Second Revision) |
PGD 37 |
| 47 |
IS 13432 : Part 1 : 1992 |
Gas leak detector for use with low pressure liquefied petroleum gas burning appliances : Part 1 mechanical type |
MED 23 |
| 48 |
IS 14612 : 1999 |
Commercial burners using LPG at inlet pressure up to 147.1 k - N/m2 (1500 Gf/cm2) - Specification |
MED 23 |
| 49 |
IS 6094 : Part 1 : 2006 |
Hexagon socket set screws: Part 1 with flat point (Third Revision) |
PGD 37 |
| 50 |
IS/ISO 2415 : 2004 |
Forged shackles for general lifting purposes - Dee shackles and bow shackles |
MED 14 |
| 51 |
IS 7795 : 2004 |
Hexagon nuts with collar - Specification (First Revision) |
PGD 37 |
| 52 |
IS 13902 : Part 3 : 1993 |
Sockets for wire ropes for general purposes: Part 3 special requirements for sockets produced by casting |
MED 10 |
| 53 |
IS/ISO 17292 : 2004 |
Metal ball valves for petroleum, petrochemical and allied industries |
MED 17 |
| 54 |
IS 15137 : 2002 |
Metal connecting lugs for porcelain transformer bushings - Specification |
ETD 6 |
| 55 |
IS 2486 : Part 2 : 1989 |
Insulator fittings for overhead power lines with nominal voltage greater than 1000 v - Specification: Part 2 dimensional requirements (Second Revision) |
ETD 6 |
| 56 |
IS 3347 : Part 8 : Sec 2 : 1992 |
Dtmensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 kV bushings: Sec 2 metal parts |
ETD 6 |
| 57 |
IS 4318 : 1993 |
Solid core porcelain insulators for overhead traction lines - Specification (First Revision) |
ETD 6 |
| 58 |
IS 7624 : 1990 |
Lead - Acid starter batteries for diesel - locomotives and rail cars - Specification (First Revision) |
ETD 11 |
| 59 |
IS 13547 : Part 1 : 2010 |
Manipulating industrial robots -- Mechanical interfaces: Part 1 Plates (second revision) |
PGD 18 |
| 60 |
IS 6137 : 1983 |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision) |
PGD 25 |
| 61 |
IS 7018 : Part 2 : 1983 |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision) |
PGD 25 |
| 62 |
IS 9610 : 1985 |
Specification for go and no go screw ring gauges for ISO metric screw threads (Size range from M1 up to and including M100) (First Revision) |
PGD 25 |
| 63 |
IS 2254 : 1985 |
Dimensions of vertical shaft motors for pumps (Second Revision) |
ETD 15 |
| 64 |
IS 10129 : 2004 |
Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors (Second Revision) |
PGD 36 |
| 65 |
IS 10433 : Part 2 : 2002 |
Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 66 |
IS 14740 : 1999 |
Pneumatic fluid power - Components using compressible fluids - Determination of flow - Rate characteristics |
PGD 36 |
| 67 |
IS 15577 : Part 1 : 2005 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 1 threaded ports |
PGD 36 |
| 68 |
IS 15577 : Part 2 : 2005 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 2 stud ends with elastomeric sealing (Type E) |
PGD 36 |
| 69 |
IS 15577 : Part 3 : 2005 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 3 stud ends with metal - To - Metal sealing (Type B) |
PGD 36 |
| 70 |
IS 4218 : Part 2 : 2001 |
ISO general purpose metric screw threads: Part 2 general plan (Second Revision) |
PGD 37 |
| 71 |
IS 4218 : Part 2 : 2001 |
ISO general purpose metric screw threads: Part 2 general plan (Second Revision) |
PGD 37 |
| 72 |
SP 42 : 2008 |
Survey of screw threads (First Revision) |
PGD 37 |
| 73 |
IS 6623 : 2004 |
High Strength Structural Nuts |
PGD 37 |
| 74 |
IS 12943 : 1990 |
Brass glands for PVC cables - Specification |
ETD 9 |
| 75 |
IS 3175 : 2013 |
Internal combustion engine - Sealing washers for pipe unions - Specification (Second Revision) |
TED 2 |
| 76 |
IS 1063 : 1997 |
Automotive vehicles - Ml4 x 1.25 spark plugs with flat seating and their cylinder head housing - Specification (Second Revision) |
TED 11 |
| 77 |
IS 5474 : 2012 |
ShipBuilding – Ships’ Side Scuttles |
TED 17 |
| 78 |
IS 8886 : Part 1 : 2012 |
Ships’ Ordinary Rectangular Windows —--Specification--Part 1 Classification, Dimensions, Materials, Marking And Designation |
TED 17 |
| 79 |
IS 10610 : 1983 |
Aircraft pressure cabin ground test connections |
TED 14 |
| 80 |
IS 6148 : 1971 |
Specification for head fittings and round nuts used with ships blocks |
TED 17 |
| 81 |
IS 6176 : 1971 |
Steel Ladders for Ship's Use |
TED 17 |
| 82 |
IS 8261 : Part 3 : 1976 |
Specification for pins and wires, skeletal, traction Part 3 pins and wires, fixation and threaded |
MHD 2 |
| 83 |
IS 3323 : 1980 |
Specification for bi-pin landholders for tubular fluorescent lamps (First Revision) |
ETD 14 |
| 84 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 85 |
IS 10735 : 2017 |
Information technology - Data communication - 15 - Pole DTE/DCE interface connector and contact number assignments (First Revision) |
LITD 13 |
| 86 |
IS 10737 : 2017 |
Information technology - Data communication - 15 - Pole DTE/DCE interface connector and contact number assignments (First Revision) |
LITD 13 |
| 87 |
IS 7002 : 2018 |
Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision) |
PGD 37 |
| 88 |
IS 8911 : 2018 |
Slotted raised countersunk head screws - Product grade A (Second Revision) |
PGD 37 |
| 89 |
IS 15582 : 2018 |
Hexagon Bolts with Flange - Small Series - Product Grade A with Driving Feature of Product Grade B ( First Revision) |
PGD 37 |
| 90 |
IS 15581 : 2018 |
Hexagon nuts with flange, style 2 - Coarse thread (First Revision) |
PGD 37 |
| 91 |
IS 7483 : 2018 |
Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision) |
PGD 37 |
| 92 |
IS 7486 : 2018 |
Raised countersunk head screws (Common Head Style) with type H or type Z cross recess - Product grade A (Third Revision) |
PGD 37 |
| 93 |
IS 7485 : Part 2 : 2018 |
Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision) |
PGD 37 |
| 94 |
IS 7485 : Part 1 : 2018 |
Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision) |
PGD 37 |
| 95 |
IS 6101 : 2018 |
Slotted pan head screws - Product grade a (Third Revision) |
PGD 37 |
| 96 |
IS 9388 : Part 2 : 2019 |
Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 97 |
IS 10651 : 2019 |
Hub axle, front for moped - Specification (First Revision) |
TED 2 |
| 98 |
IS 10653 : 2019 |
Hub axle, rear, for moped - Specification (First Revision) |
TED 2 |
| 99 |
IS 11139 : 2019 |
Adjusters for control cables for moped - Specification (First Revision) |
TED 2 |
| 100 |
IS 9388 : Part 1 : 1979 |
Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 101 |
IS 9389 : Part 1 : 2018 |
Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings |
PGD 36 |
| 102 |
IS 9390 : 2018 |
Specification for straight coupling body for oil - Hydraulic couplings |
PGD 36 |
| 103 |
IS 9389 : Part 2 : 2018 |
Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 104 |
IS 1367 : Part 14 : Sec 3 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision |
PGD 37 |
| 105 |
IS 14962 : Part 1 : 2018 |
ISO general purpose metric screw threads - Tolerances: Part 1 principles and basic data (First Revision) |
PGD 37 |
| 106 |
IS 9387 : Part 1 : 2018 |
Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw |
PGD 36 |
| 107 |
IS 9387 : Part 2 : 2018 |
Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 108 |
IS/IEC 62688 : 2017 |
Concentrator Photovoltaic (CPV) Modules and Assemblies Safety Qualification |
ETD 28 |
| 109 |
IS 10736 : 2016 |
Information technology - Data communication - 37 - Pole DTE/DCE interface connector and contact number assignments (First Revision) |
LITD 13 |
| 110 |
IS 13170 : Part 1 : 1999 |
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O - Ring sealing: Part 1 ports with O - Ring seal in truncated housing (First Revision) |
PGD 36 |
| 111 |
IS 13170 : Part 2 : 1999 |
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O - Ring sealing: Part 2 heavy duty (S Series) stud ends - Dimensions, design, test methods and requirements |
PGD 36 |
| 112 |
IS 13170 : Part 3 : 1999 |
Connections for fluid power and general use - Ports and stud ends withISO 261 threads and o - Ring sealing: Part 3 light duty (L Series) stud ends - Dimensions, design,test methods and requirements |
PGD 36 |
| 113 |
IS 9229 : 1979 |
Specification for inductors for electromagnetic interference suppression |
LITD 24 |
| 114 |
IS 6297 : Part 1 : 1971 |
Specification for transformers and inductors (Power, Audio, Pulse And Switching) for electronic equipment: Part 1 general requirements and tests |
LITD 24 |
| 115 |
IS 16280 : 2014 |
Unreduced pressure adaptors for use with liquefied petroleum gas (LPG) - Specification |
MED 16 |
| 116 |
IS 15657 : 2006 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
MED 20 |
| 117 |
IS 13252 : Part 1 : 2010 |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
LITD 7 |
| 118 |
IS 5624 : 1993 |
Foundation bolts - Specification (First Revision) |
PGD 37 |
| 119 |
IS 3521 : Part 5 : 2021 |
Personal fall arrest systems - Specification : Part 5 connectors with self-closing and self-locking gates |
CHD 8 |
| 120 |
IS 13252 : Part 1 : 2010 |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
LITD 7 |
| 121 |
IS 11563 : 1986 |
Technical supply conditions for dynamic compressors |
MED 22 |
| 122 |
IS 15628 : 2005 |
Slotted set screws with flat point |
PGD 37 |
| 123 |
IS 1365 : 2005 |
Slotted countersunk flat head screws (Common Head Style) - product grade a (Fourth Revision) |
PGD 37 |
| 124 |
IS 13902 : Part 2 : 1993 |
Sockets for wire ropes for general purposes: Part 2 special requirements for sockets produced by forging or machined from the solid |
MED 10 |
| 125 |
IS 1366 : 2002 |
Slotted cheese head screws - Product grade A (Third Revision) |
PGD 37 |
| 126 |
IS 11228 : 1985 |
Recommendations for design of screw hoists for hydraulic gates |
WRD 12 |
| 127 |
IS 13726 : 2018 |
Hexagon Head Bolts With Metric Fine Pitch Thread — Product Grades A and B ( Second Revision ) |
PGD 37 |
