| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 7587 : Part 6 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 6 safety detaching hooks (4 Plates Type) 80 and 100 kN capacity (First Revision) |
MED 8 |
| 2 |
IS 7587 : Part 3 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 3 shackles and pins (First Revision) |
MED 8 |
| 3 |
IS 7587 : Part 2 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 2 cappels (First Revision) |
MED 8 |
| 4 |
IS 1367 : Part 1 : 2014 |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) |
PGD 37 |
| 5 |
IS 2269 : 2006 |
Hexagon socket head cap screws (Fifth Revision) |
PGD 37 |
| 6 |
IS 2585 : 2006 |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) |
PGD 37 |
| 7 |
IS 3726 : 2003 |
Thumb screws - Specification (Second Revision) |
PGD 37 |
| 8 |
IS 6094 : Part 1 : 2006 |
Hexagon socket set screws: Part 1 with flat point (Third Revision) |
PGD 37 |
| 9 |
IS 6094 : Part 2 : 2006 |
Hexagon socket set screws: Part 2 with cone point (Third Revision) |
PGD 37 |
| 10 |
IS 6094 : Part 3 : 2006 |
Hexagon socket set screws: Part 3 with dog point (Third Revision) |
PGD 37 |
| 11 |
IS 6094 : Part 4 : 2006 |
Hexagon socket set screws: Part 4 with cup point (Third Revision) |
PGD 37 |
| 12 |
IS 7795 : 2004 |
Hexagon nuts with collar - Specification (First Revision) |
PGD 37 |
| 13 |
IS 8788 : 2002 |
Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision) |
PGD 37 |
| 14 |
IS/ISO 17292 : 2004 |
Metal ball valves for petroleum, petrochemical and allied industries |
MED 17 |
| 15 |
IS 10433 : Part 2 : 2002 |
Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 16 |
IS/IEC 61241 : PART 0 : 2004 |
Electrical apoparatus for use in the presence of compustible dust : Part 0 General requirements |
ETD 22 |
| 17 |
IS 10248 : PART 1 : 2011 |
Parallel pins with internal thread: Part 1 unhardened steel and austenitic stainless steel (First Revision) |
PGD 37 |
| 18 |
IS 10248 : PART 2 : 2011 |
Parallel pins with internal thread: Part 2 hardened steel and martensitic stainless steel (First Revision) |
PGD 37 |
| 19 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 20 |
IS 7002 : 2018 |
Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision) |
PGD 37 |
| 21 |
IS 8911 : 2018 |
Slotted raised countersunk head screws - Product grade A (Second Revision) |
PGD 37 |
| 22 |
IS 15582 : 2018 |
Hexagon Bolts with Flange - Small Series - Product Grade A with Driving Feature of Product Grade B ( First Revision) |
PGD 37 |
| 23 |
IS 15581 : 2018 |
Hexagon nuts with flange, style 2 - Coarse thread (First Revision) |
PGD 37 |
| 24 |
IS 7483 : 2018 |
Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision) |
PGD 37 |
| 25 |
IS 7486 : 2018 |
Raised countersunk head screws (Common Head Style) with type H or type Z cross recess - Product grade A (Third Revision) |
PGD 37 |
| 26 |
IS 7485 : Part 2 : 2018 |
Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision) |
PGD 37 |
| 27 |
IS 7485 : Part 1 : 2018 |
Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision) |
PGD 37 |
| 28 |
IS 6101 : 2018 |
Slotted pan head screws - Product grade a (Third Revision) |
PGD 37 |
| 29 |
IS 1367 : Part 8 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision ) |
PGD 37 |
| 30 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
| 31 |
IS 15657 : 2006 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
MED 20 |
| 32 |
IS 15628 : 2005 |
Slotted set screws with flat point |
PGD 37 |
| 33 |
IS 1365 : 2005 |
Slotted countersunk flat head screws (Common Head Style) - product grade a (Fourth Revision) |
PGD 37 |
| 34 |
IS 1366 : 2002 |
Slotted cheese head screws - Product grade A (Third Revision) |
PGD 37 |
| 35 |
IS 5988 : 1970 |
Specification for spring dowel sleeves (Light And Heavy Patterns) for use in foundries |
MTD 14 |
| 36 |
IS 9746 : Part 1 : 1983 |
Specification for equal cross body for oil - Hydraulic coupling: Part 1 made from forgings |
PGD 36 |
| 37 |
IS 10453 : Part 2 : 1983 |
Specification for taper male stud tee body (Stud Run) for oil - Hydraulic couplings - Part 2 : made from bar stock |
PGD 36 |
| 38 |
IS 10433 : Part 1 : 1983 |
Specification for male stud tee body (Stud Run) for oil - Hydraulic coupling: Part 1 made from forgings |
PGD 36 |
| 39 |
IS 10453 : Part 1 : 1983 |
Specification for taper male stud tee body (Stud Run) for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 40 |
IS 9757 : Part 1 : 1981 |
Specification for bulkhead elbow body for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 41 |
IS 10956 : 1984 |
Specification for welding coupling body for oil hydraulic couplings |
PGD 36 |
| 42 |
IS 9725 : Part 2 : 1981 |
Specification for male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 43 |
IS 9768 : 1995 |
Bulkhead straight body for oil - Hydraulic couplings - Specification (first revision) |
PGD 36 |
