| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 801 : 1975 |
Code of practice for use of cold - Formed light gauge steel structural members in general building construction (First Revision) |
CED 7 |
| 2 |
IS 803 : 1976 |
Code of Practice for Design, Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks (First Revision) |
CED 7 |
| 3 |
IS 807 : 2006 |
Design, erection and testing (Structural Portion) of cranes and hoists - Code of practice (Second Revision) |
MED 14 |
| 4 |
IS 4009 : Part 1 : 1981 |
Specification for grease nipples: Part 1 button head grease nipples (First Revision) |
PGD 19 |
| 5 |
IS 4009 : Part 2 : 1981 |
Specification for grease nlpples: Part 2 conical head grease nipples (First Revision) |
PGD 19 |
| 6 |
IS 5548 : 1970 |
SpeciftCation for lubricating nipple adaptors |
PGD 19 |
| 7 |
IS 2015 : 1977 |
Specification for t - Nuts (First Revision) |
PGD 35 |
| 8 |
IS 1364 : Part 5 : 2002 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision) |
PGD 37 |
| 9 |
IS 1367 : Part 19 : 1997 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs |
PGD 37 |
| 10 |
IS 1821 : 1987 |
Dimensions for clearance holes for bolts and screws (Third Revision) |
PGD 37 |
| 11 |
IS 2269 : 2006 |
Hexagon socket head cap screws (Fifth Revision) |
PGD 37 |
| 12 |
IS 2393 : 2010 |
Parallel pins, of unhardened steel and austenitic stainless steel (Third Revision) |
PGD 37 |
| 13 |
IS 2687 : 1991 |
Capnuts - Specification (Second Revision) |
PGD 37 |
| 14 |
IS 3726 : 2003 |
Thumb screws - Specification (Second Revision) |
PGD 37 |
| 15 |
IS 549 : 2005 |
Split pins - Specification (Third Revision) |
PGD 37 |
| 16 |
IS 6094 : Part 1 : 2006 |
Hexagon socket set screws: Part 1 with flat point (Third Revision) |
PGD 37 |
| 17 |
IS 6094 : Part 2 : 2006 |
Hexagon socket set screws: Part 2 with cone point (Third Revision) |
PGD 37 |
| 18 |
IS 6094 : Part 3 : 2006 |
Hexagon socket set screws: Part 3 with dog point (Third Revision) |
PGD 37 |
| 19 |
IS 6094 : Part 4 : 2006 |
Hexagon socket set screws: Part 4 with cup point (Third Revision) |
PGD 37 |
| 20 |
IS 6689 : 2003 |
Parallel pins of hardened steel and martensitic stainless steel (Dowel Pins) (First Revision) |
PGD 37 |
| 21 |
IS 7368 : 2005 |
Grooved pins - Full - Length taper grooved (Second Revision) |
PGD 37 |
| 22 |
IS 7383 : 2005 |
Grooved puns - One - Third - Length centre grooved (Second Revision) |
PGD 37 |
| 23 |
IS 7384 : 2005 |
Grooved pins - Full - Length parallel grooved, with pilot (Second Revision) |
PGD 37 |
| 24 |
IS 7385 : 2005 |
Grooved pins - Half - Length taper grooved (Second Revision) |
PGD 37 |
| 25 |
IS 7386 : 2005 |
Grooved pins - Half - Length reverse taper grooved (Second Revision) |
PGD 37 |
| 26 |
IS 7790 : 1991 |
Domed cap nuts - Specification (First Revision) |
PGD 37 |
| 27 |
IS 15084 : 2002 |
Spring balance - Tension type (For Use In Schools) - Specification |
PGD 22 |
| 28 |
IS 10248 : PART 1 : 2011 |
Parallel pins with internal thread: Part 1 unhardened steel and austenitic stainless steel (First Revision) |
PGD 37 |
| 29 |
IS 10248 : PART 2 : 2011 |
Parallel pins with internal thread: Part 2 hardened steel and martensitic stainless steel (First Revision) |
PGD 37 |
| 30 |
IS 6148 : 1971 |
Specification for head fittings and round nuts used with ships blocks |
TED 17 |
| 31 |
IS 6204 : 1971 |
Specification for cast open roller fairleads |
TED 17 |
| 32 |
IS 6195 : 1971 |
Specification for cast open chocks |
TED 17 |
| 33 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 34 |
IS 13723 : 2018 |
Hexagon High Nuts (Style 2) With Metric Fine Pitch Thread - Product Grades A and B (Second Revision) |
PGD 37 |
| 35 |
IS 7170 : 2018 |
Slotted countersunk (Flat) head tapping screws (Second Revision) |
PGD 37 |
| 36 |
IS 7169 : 2018 |
Slotted raised countersunk (Oval) head tapping screws (Second Revision) |
PGD 37 |
| 37 |
IS 7002 : 2018 |
Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision) |
PGD 37 |
| 38 |
IS 8911 : 2018 |
Slotted raised countersunk head screws - Product grade A (Second Revision) |
PGD 37 |
| 39 |
IS 13722 : 2002 |
Hexagon regular nuts (Style 1) with metric fine pitch thread - Product grades A and B (Second Revision) |
PGD 37 |
| 40 |
IS 13724 : 2018 |
Hexagon thin nuts chamfered (Style 0) with metric fine pitch thread - Product grades A and B (Second Revision) |
PGD 37 |
| 41 |
IS 15582 : 2018 |
Hexagon Bolts with Flange - Small Series - Product Grade A with Driving Feature of Product Grade B ( First Revision) |
PGD 37 |
| 42 |
IS 15581 : 2018 |
Hexagon nuts with flange, style 2 - Coarse thread (First Revision) |
PGD 37 |
| 43 |
IS 7483 : 2018 |
Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision) |
PGD 37 |
| 44 |
IS 7486 : 2018 |
Raised countersunk head screws (Common Head Style) with type H or type Z cross recess - Product grade A (Third Revision) |
PGD 37 |
| 45 |
IS 7485 : Part 2 : 2018 |
Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision) |
PGD 37 |
| 46 |
IS 7485 : Part 1 : 2018 |
Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision) |
PGD 37 |
| 47 |
IS 7173 : 2018 |
Slotted pan head tapping screws (Second Revision) |
PGD 37 |
| 48 |
IS 6101 : 2018 |
Slotted pan head screws - Product grade a (Third Revision) |
PGD 37 |
| 49 |
IS 1363 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
| 50 |
IS 9388 : Part 2 : 2019 |
Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 51 |
IS 17215 : 2019 |
Fluid Power System ― Hexagon Socket Screw Plugs with Parallel Screw Threads with Elastomeric Sealing ― Specification |
PGD 36 |
| 52 |
IS 9388 : Part 1 : 1979 |
Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 53 |
IS 9389 : Part 1 : 2018 |
Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings |
PGD 36 |
| 54 |
IS 9390 : 2018 |
Specification for straight coupling body for oil - Hydraulic couplings |
PGD 36 |
| 55 |
IS 9389 : Part 2 : 2018 |
Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 56 |
IS 1364 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) |
PGD 37 |
| 57 |
IS 1364 : Part 4 : 2003 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision) |
PGD 37 |
| 58 |
IS 1364 : Part 6 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision ) |
PGD 37 |
| 59 |
IS 1367 : Part 11 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision ) |
PGD 37 |
| 60 |
IS 6392 : 2020 |
Steel Pipes Flanges — Specification ( First Revision ) |
MTD 19 |
| 61 |
IS 9387 : Part 1 : 2018 |
Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw |
PGD 36 |
| 62 |
IS 9387 : Part 2 : 2018 |
Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 63 |
IS 15500 : Part 1 to 8 : 2004 |
Deepwell handpumps, components and special tools - Specification |
MED 27 |
| 64 |
IS 5624 : 1993 |
Foundation bolts - Specification (First Revision) |
PGD 37 |
| 65 |
IS 16323 : 2017 |
SHIPS AND MARINE TECHNOLOGY - MARINE MAGNETIC COMPASSES, BINNACLES AND AZIMUTH READING DEVICES |
TED 19 |
| 66 |
IS 17382 : 2021 |
Syn Gas Ammonia Turbo Compressor Lubricating Oils Specification |
PCD 25 |
| 67 |
IS 15628 : 2005 |
Slotted set screws with flat point |
PGD 37 |
| 68 |
IS 1365 : 2005 |
Slotted countersunk flat head screws (Common Head Style) - product grade a (Fourth Revision) |
PGD 37 |
| 69 |
IS 8035 : 1999 |
Handpump - Shallow well - Specification (First Revision) |
MED 27 |
| 70 |
IS 11042 : Part 1 : 1984 |
Specification for binding screws for alpine skis: Part 1 general requirements |
PGD 27 |
| 71 |
IS 1366 : 2002 |
Slotted cheese head screws - Product grade A (Third Revision) |
PGD 37 |
| 72 |
IS 6761 : 2013 |
Hexagon socket countersunk headscrews (Second Revision) |
PGD 37 |
| 73 |
IS 13725 : 2002 |
Hexagon head screws with metric fine pitch thread - Product grades A and B (First Revision) |
PGD 37 |
| 74 |
IS 1363 : Part 2 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 2 Hexagon Head Screws ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
| 75 |
IS 13726 : 2018 |
Hexagon Head Bolts With Metric Fine Pitch Thread — Product Grades A and B ( Second Revision ) |
PGD 37 |
| 76 |
IS 9746 : Part 1 : 1983 |
Specification for equal cross body for oil - Hydraulic coupling: Part 1 made from forgings |
PGD 36 |
| 77 |
IS 10453 : Part 2 : 1983 |
Specification for taper male stud tee body (Stud Run) for oil - Hydraulic couplings - Part 2 : made from bar stock |
PGD 36 |
| 78 |
IS 10433 : Part 1 : 1983 |
Specification for male stud tee body (Stud Run) for oil - Hydraulic coupling: Part 1 made from forgings |
PGD 36 |
| 79 |
IS 10453 : Part 1 : 1983 |
Specification for taper male stud tee body (Stud Run) for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 80 |
IS 9757 : Part 1 : 1981 |
Specification for bulkhead elbow body for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 81 |
IS 14894 : 2001 |
FASTENERS — HEXAGON HEAD BOLTS OF PRODUCT GRADE B — REDUCED SHANK (SHANK DIAMETER = PITCH DIAMETER) — SPECIFICATION |
PGD 37 |
| 82 |
IS 1364 : Part 1 : 2018 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision) |
PGD 37 |
| 83 |
IS 1364 : Part 2 : 2018 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision) |
PGD 37 |
| 84 |
IS 10956 : 1984 |
Specification for welding coupling body for oil hydraulic couplings |
PGD 36 |
| 85 |
IS 9725 : Part 2 : 1981 |
Specification for male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 86 |
IS 1363 : Part 1 : 2019 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
| 87 |
IS 15757 : 2022 |
FOLLOW-UP FORMULA-COMPLEMENTARY FOODS - SPECIFICATION (First Revision of IS 15757) |
FAD 19 |
| 88 |
IS 17875 : 2022 |
Stainless Steel seamless pipes and tubes for general service |
MTD 19 |
| 89 |
IS 17876 : 2022 |
Stainless steel welded pipes and tubes for general service |
MTD 19 |
| 90 |
IS 17802 : Part 2 : 2022 |
Accessibility for the ICT Products and Services Part 2: Determination of Conformance |
LITD 35 |
| 91 |
IS/ISO 37002 : 2021 |
Whistleblowing Management Systems - Guidelines |
MSD 10 |
| 92 |
IS 582 : Part 11 : Sec 1 : 2022 |
METHODS OF CHEMICAL TESTING OF LEATHER Part 11 Determination of chromium(VI) content in leather Section 1: Colorimetric method |
CHD 17 |
| 93 |
IS 17003 : Part 13 : 2022 |
Nanotechnologies Vocabulary Part 13: Graphene and related two-dimensional 2D materials |
MTD 33 |
| 94 |
IS 17018 : Part 1 : 2022 |
Solar Photovoltaic Water Pumping Systems Part 1 Centrifugal Pumps Specification |
MED 20 |
| 95 |
IS 802 : Part 6 : 2022 |
Use of Structural Steel in Overhead Transmission Line Towers — Code of Practice Part 6 Tower Erection |
CED 7 |
| 96 |
IS 2079 : 2022 |
GRAPHITE FOR PENCIL SLIPS - SPECIFICATION (Second Revision) |
CHD 14 |
| 97 |
IS 9768 : 1995 |
Bulkhead straight body for oil - Hydraulic couplings - Specification (first revision) |
PGD 36 |
| 98 |
IS 9412 : Part 1 : 1980 |
Specification for male stud elbow body for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 99 |
IS 9757 : Part 2 : 1983 |
Specification for bulkhead elbow body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 100 |
IS 4351 : 2003 |
Steel Door Frames -Specification ( Second Revision) |
CED 11 |
| 101 |
IS 9724 : Part 2 : 1981 |
Specification for taper male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
