| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 7587 : Part 6 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 6 safety detaching hooks (4 Plates Type) 80 and 100 kN capacity (First Revision) |
MED 8 |
| 2 |
IS 7587 : Part 3 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 3 shackles and pins (First Revision) |
MED 8 |
| 3 |
IS 7587 : Part 2 : 2006 |
Cage suspension gear for winding in mines - Specification: Part 2 cappels (First Revision) |
MED 8 |
| 4 |
IS 1364 : Part 5 : 2002 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision) |
PGD 37 |
| 5 |
IS 1367 : Part 1 : 2014 |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) |
PGD 37 |
| 6 |
IS 1367 : Part 2 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision) |
PGD 37 |
| 7 |
IS 14962 : Part 2 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality |
PGD 37 |
| 8 |
IS 14962 : Part 5 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing |
PGD 37 |
| 9 |
IS 2585 : 2006 |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) |
PGD 37 |
| 10 |
IS 3726 : 2003 |
Thumb screws - Specification (Second Revision) |
PGD 37 |
| 11 |
IS 7795 : 2004 |
Hexagon nuts with collar - Specification (First Revision) |
PGD 37 |
| 12 |
IS 8788 : 2002 |
Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision) |
PGD 37 |
| 13 |
IS 10433 : Part 2 : 2002 |
Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 14 |
IS/IEC 60079 : PART 0 : 2017 |
Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision ) |
ETD 22 |
| 15 |
IS/IEC 60079 : Part 1 : 2014 |
Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d" |
ETD 22 |
| 16 |
IS/IEC 61241 : PART 0 : 2004 |
Electrical apoparatus for use in the presence of compustible dust : Part 0 General requirements |
ETD 22 |
| 17 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 18 |
IS 13723 : 2018 |
Hexagon High Nuts (Style 2) With Metric Fine Pitch Thread - Product Grades A and B (Second Revision) |
PGD 37 |
| 19 |
IS 13722 : 2002 |
Hexagon regular nuts (Style 1) with metric fine pitch thread - Product grades A and B (Second Revision) |
PGD 37 |
| 20 |
IS 13724 : 2018 |
Hexagon thin nuts chamfered (Style 0) with metric fine pitch thread - Product grades A and B (Second Revision) |
PGD 37 |
| 21 |
IS 1363 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
| 22 |
IS 1364 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) |
PGD 37 |
| 23 |
IS 1364 : Part 4 : 2003 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision) |
PGD 37 |
| 24 |
IS 1364 : Part 6 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision ) |
PGD 37 |
| 25 |
IS 1367 : Part 5 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
| 26 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
| 27 |
IS 13170 : Part 1 : 1999 |
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O - Ring sealing: Part 1 ports with O - Ring seal in truncated housing (First Revision) |
PGD 36 |
| 28 |
IS 13170 : Part 2 : 1999 |
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O - Ring sealing: Part 2 heavy duty (S Series) stud ends - Dimensions, design, test methods and requirements |
PGD 36 |
| 29 |
IS 13170 : Part 3 : 1999 |
Connections for fluid power and general use - Ports and stud ends withISO 261 threads and o - Ring sealing: Part 3 light duty (L Series) stud ends - Dimensions, design,test methods and requirements |
PGD 36 |
| 30 |
IS 7008 : Part 4 : 1999 |
ISO metric trapezoidal screw threads: Part 4 tolerances (Second Revision) |
PGD 37 |
| 31 |
IS 15657 : 2006 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
MED 20 |
| 32 |
IS 5624 : 1993 |
Foundation bolts - Specification (First Revision) |
PGD 37 |
| 33 |
IS 3521 : Part 5 : 2021 |
Personal fall arrest systems - Specification : Part 5 connectors with self-closing and self-locking gates |
CHD 8 |
| 34 |
IS 13902 : Part 2 : 1993 |
Sockets for wire ropes for general purposes: Part 2 special requirements for sockets produced by forging or machined from the solid |
MED 10 |
| 35 |
IS 6020 : 2003 |
Dental hand instruments - Reusable mirrors and handles (First Revision) |
MHD 8 |
| 36 |
IS 3121 : 1981 |
Specification for rigging screws and stretching screws (First Revision) |
MED 10 |
| 37 |
IS 6761 : 2013 |
Hexagon socket countersunk headscrews (Second Revision) |
PGD 37 |
| 38 |
IS/IEC 60079 : PART 31 : 2013 |
Explosive atmospheres: Part 31 equipment dust ignition protection by enclosure "T" (First Revision) |
ETD 22 |
| 39 |
IS 14962 : Part 4 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 4 limits of sizes for hot - Dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or g after galvanizing |
PGD 37 |
| 40 |
IS 13725 : 2002 |
Hexagon head screws with metric fine pitch thread - Product grades A and B (First Revision) |
PGD 37 |
| 41 |
IS 1363 : Part 2 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 2 Hexagon Head Screws ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
| 42 |
IS 13726 : 2018 |
Hexagon Head Bolts With Metric Fine Pitch Thread — Product Grades A and B ( Second Revision ) |
PGD 37 |
| 43 |
IS 14894 : 2001 |
FASTENERS — HEXAGON HEAD BOLTS OF PRODUCT GRADE B — REDUCED SHANK (SHANK DIAMETER = PITCH DIAMETER) — SPECIFICATION |
PGD 37 |
| 44 |
IS 1364 : Part 1 : 2018 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision) |
PGD 37 |
| 45 |
IS 1364 : Part 2 : 2018 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision) |
PGD 37 |
| 46 |
IS 1363 : Part 1 : 2019 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
