| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 902 : 1992 |
Suction hose couplings for fire fighting purposes - Specification (Third Revision) |
CED 22 |
| 2 |
IS 778 : 1984 |
Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
CED 3 |
| 3 |
IS 1703 : 2000 |
Water fittings - copper alloy float valves (horizontal plunger type) - Specification (fourth revision) |
CED 3 |
| 4 |
IS 11931 : 1987 |
Specification for Sewer Cleaning Metal Rods |
CED 24 |
| 5 |
IS 9798 : 2013 |
Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision) |
MED 16 |
| 6 |
IS 1361 : 1978 |
Specification for Steel Windows for Industrial Buildings |
CED 11 |
| 7 |
IS 1038 : 1983 |
Specification For Steel Doors, Windows And Ventilators |
CED 11 |
| 8 |
IS 12665 : Part 3 : 1989 |
Press Working Tools - Shanks:part 3 Shanks with Screwed Shaft |
PGD 4 |
| 9 |
IS 2995 : 1988 |
Specification for set collars (First Revision) |
PGD 35 |
| 10 |
IS 2670 : 1991 |
Thread milling cutter shell type specification (first revision) |
PGD 32 |
| 11 |
IS 5702 : 1970 |
Specification for flat thread rolling dies |
PGD 32 |
| 12 |
IS 6171 : 1992 |
Screwing taps - Technical supply conditions (Second Revision) |
PGD 32 |
| 13 |
IS 6173 : Part 1 : 1992 |
Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision) |
PGD 32 |
| 14 |
IS 6175 : Part 1 : 1992 |
Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision) |
PGD 32 |
| 15 |
IS 6175 : Part 2 : 1992 |
Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision) |
PGD 32 |
| 16 |
IS 6175 : Part 3 : 1992 |
Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision) |
PGD 32 |
| 17 |
IS 6175 : Part 4 : 1991 |
Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification |
PGD 32 |
| 18 |
IS 6175 : Part 5 : 1991 |
Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification |
PGD 32 |
| 19 |
IS 12321 : 1988 |
Specification for circular screwing dies for ISO metric threads |
PGD 32 |
| 20 |
IS 12325 : 1988 |
Specification for circular screwing dies for ISO metric conduit pipe threads |
PGD 32 |
| 21 |
IS 13114 : 1991 |
Forged brass gate, globe and check valves for water works purposes - Specification |
CED 3 |
| 22 |
IS 10749 : 1983 |
Specification for swivel head nut for screw type mounts in pusher legs |
PGD 8 |
| 23 |
IS 2692 : 1989 |
Ferrules for water services - specification (second revision) |
CED 3 |
| 24 |
IS 4009 : Part 2 : 1981 |
Specification for grease nlpples: Part 2 conical head grease nipples (First Revision) |
PGD 19 |
| 25 |
IS 9762 : 1994 |
Specification for polyethylene floats (Spherical) for float valves (first revision) |
CED 3 |
| 26 |
IS 10131 : 1992 |
Link chain ends and chain bows for bucket elevators - Specification (First Revision) |
MED 14 |
| 27 |
IS 2693 : 1989 |
Power transmissionbush type flexible coupling (Second Revision) |
PGD 33 |
| 28 |
IS 7285 : Part 1 : 2018 |
Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision) |
MED 16 |
| 29 |
IS 4786 : 2014 |
Variable high pressure regulators (VHPR) for use with liquefied petroleum gases - Specification (First Revision) |
MED 16 |
| 30 |
IS 13065 : 1991 |
Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements |
MED 7 |
| 31 |
IS 5740 : 1996 |
Household sewing machines - Memorandum on screw threads for sewing machine components (First Revision) |
MED 29 |
| 32 |
IS 13219 : 1992 |
Rock bolts for mines (Cement Grouted) - General requirements |
MED 8 |
| 33 |
IS 6680 : 1992 |
Railway carriagefans - Specification (First Revision) |
ETD 32 |
| 34 |
IS 10238 : 2001 |
Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision) |
PGD 37 |
| 35 |
IS 10288 : 1982 |
Specification for belt - Fasteners, plate type |
PGD 40 |
| 36 |
IS 12427 : 2001 |
Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision) |
PGD 37 |
| 37 |
IS 13096 : 2000 |
Fasteners - Hexagon nuts with specified proof load values - Fine pitch thread - Mechanical properties (First Revision) |
PGD 37 |
| 38 |
IS 14394 : 1996 |
Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36) |
PGD 37 |
| 39 |
IS 14962 : Part 2 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality |
PGD 37 |
| 40 |
IS 14962 : Part 5 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing |
PGD 37 |
| 41 |
IS 15100 : 2018 |
Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) |
MED 16 |
| 42 |
IS 2585 : 2006 |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) |
PGD 37 |
| 43 |
IS 9705 : Part 1 : 1980 |
Specification for quick release coupling for vacuum pipe lines: Part 1 screwed couplings type b |
MED 17 |
| 44 |
IS 3524 : Part 1 : 1982 |
Specification for threaded taper pins: Part 1 with internal threads (First Revision) |
PGD 37 |
| 45 |
IS 3726 : 2003 |
Thumb screws - Specification (Second Revision) |
PGD 37 |
| 46 |
IS 13432 : Part 1 : 1992 |
Gas leak detector for use with low pressure liquefied petroleum gas burning appliances : Part 1 mechanical type |
MED 23 |
| 47 |
IS 14612 : 1999 |
Commercial burners using LPG at inlet pressure up to 147.1 kN/m2 (1 500 gf/cm2) - Specification |
MED 23 |
| 48 |
IS 7795 : 2004 |
Hexagon nuts with collar - Specification (First Revision) |
PGD 37 |
| 49 |
IS 9965 : 1981 |
Limits of sizes for ISO metric external screw threads for high temperature applications |
PGD 37 |
| 50 |
IS 11164 : 1992 |
Photography - Front Lens Barrels Up To 127 Mm Dimensions Important To The Connection Of Auxiliaries |
MED 32 |
| 51 |
IS 13902 : Part 3 : 1993 |
Sockets for wire ropes for general purposes: Part 3 special requirements for sockets produced by casting |
MED 10 |
| 52 |
IS 15137 : 2002 |
Metal connecting lugs for porcelain transformer bushings - Specification |
ETD 6 |
| 53 |
IS 3347 : Part 8 : Sec 2 : 1992 |
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 : 52 kV bushings: Sec 2 metal parts |
ETD 6 |
| 54 |
IS 4318 : 1993 |
Solid core porcelain insulators for overhead traction lines - Specification (First Revision) |
ETD 6 |
| 55 |
IS 7624 : 1990 |
Lead - Acid starter batteries for diesel - locomotives and rail cars - Specification (First Revision) |
ETD 11 |
| 56 |
IS 10685 : 1983 |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200) |
PGD 25 |
| 57 |
IS 6137 : 1983 |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision) |
PGD 25 |
| 58 |
IS 6244 : 1980 |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision) |
PGD 25 |
| 59 |
IS 7018 : Part 2 : 1983 |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision) |
PGD 25 |
| 60 |
IS 2254 : 1985 |
Dimensions of vertical shaft motors for pumps (Second Revision) |
ETD 15 |
| 61 |
IS 10433 : Part 2 : 2002 |
Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 62 |
IS/IEC 60079 : PART 0 : 2017 |
Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision ) |
ETD 22 |
| 63 |
IS/IEC 61241 : PART 0 : 2004 |
Electrical apoparatus for use in the presence of compustible dust : Part 0 General requirements |
ETD 22 |
| 64 |
SP 42 : 2008 |
Survey of screw threads (First Revision) |
PGD 37 |
| 65 |
IS 6623 : 2004 |
High Strength Structural Nuts |
PGD 37 |
| 66 |
IS 12943 : 1990 |
Brass glands for PVC cables - Specification |
ETD 9 |
| 67 |
IS 3175 : 2013 |
Internal combustion engine - Sealing washers for pipe unions - Specification (Second Revision) |
TED 2 |
| 68 |
IS 1063 : 1997 |
Automotive vehicles - Ml4 x 1.25 spark plugs with flat seating and their cylinder head housing - Specification (Second Revision) |
TED 11 |
| 69 |
IS 6148 : 1971 |
Specification for head fittings and round nuts used with ships blocks |
TED 17 |
| 70 |
IS 6176 : 1971 |
Steel Ladders for Ship's Use |
TED 17 |
| 71 |
IS 3323 : 1980 |
Specification for bi-pin landholders for tubular fluorescent lamps (First Revision) |
ETD 14 |
| 72 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 73 |
IS 616 : 2017 |
Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) |
LITD 7 |
| 74 |
IS 9388 : Part 2 : 2019 |
Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 75 |
IS 9388 : Part 1 : 1979 |
Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 76 |
IS 9389 : Part 1 : 2018 |
Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings |
PGD 36 |
| 77 |
IS 9390 : 2018 |
Specification for straight coupling body for oil - Hydraulic couplings |
PGD 36 |
| 78 |
IS 9389 : Part 2 : 2018 |
Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 79 |
IS 1367 : Part 14 : Sec 3 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision |
PGD 37 |
| 80 |
IS 9387 : Part 1 : 2018 |
Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw |
PGD 36 |
| 81 |
IS 9387 : Part 2 : 2018 |
Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 82 |
IS 9229 : 1979 |
Specification for inductors for electromagnetic interference suppression |
LITD 24 |
| 83 |
IS 6297 : Part 1 : 1971 |
Specification for transformers and inductors (Power, Audio, Pulse And Switching) for electronic equipment: Part 1 general requirements and tests |
LITD 24 |
| 84 |
IS 16280 : 2014 |
Unreduced pressure adaptors for use with liquefied petroleum gas (LPG) - Specification |
MED 16 |
| 85 |
IS 15657 : 2006 |
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
MED 20 |
| 86 |
IS 13252 : Part 1 : 2010 |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
LITD 7 |
| 87 |
IS 5624 : 1993 |
Foundation bolts - Specification (First Revision) |
PGD 37 |
| 88 |
IS/ISO 12812 : Part 1 : 2017 |
Core banking- Mobile financial services- Part 1: General framework |
SSD 3 |
| 89 |
IS 13252 : Part 1 : 2010 |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
LITD 7 |
| 90 |
IS 11563 : 1986 |
Technical supply conditions for dynamic compressors |
MED 22 |
| 91 |
IS 778 : 1984 |
Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
CED 3 |
| 92 |
IS 11228 : 1985 |
Recommendations for design of screw hoists for hydraulic gates |
WRD 12 |
| 93 |
IS 2699 : 1982 |
Specification for flats and flats' screws (first revision) |
TXD 14 |
| 94 |
IS 2531 : 1979 |
Specification for crank shaft for cotton looms (first revision) |
TXD 14 |
| 95 |
IS 835 : 1978 |
Specification for bottom shaft for cotton looms (first revision) |
TXD 14 |
| 96 |
IS 10786 : 1984 |
Mirror, Rhinoscopic, ST. Clair Thomson's Pattern |
MHD 4 |
| 97 |
IS 3279 : 1966 |
General requirements for mushroom ventiliators |
TED 17 |
