| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 802 : Part 1 : Sec 1 : 2015 |
Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision) |
CED 7 |
| 2 |
IS 10987 : 1992 |
Code of Practice for Design, Fabrication, Testing and Installation of Under - Ground/Above - Ground Horizontal CylindricalSteel Storage Tanks for Petroleum Products (First Revision) |
CED 7 |
| 3 |
IS 800 : 2007 |
General construction in steel - Code of practice (Third Revision) |
CED 7 |
| 4 |
IS 6533 : Part 2 : 1989 |
Code of Practice for Design and Construction of Steel Chimneys: Part 2 Structural Aspects (First Revision) |
CED 38 |
| 5 |
IS 801 : 1975 |
Code of practice for use of cold - Formed light gauge steel structural members in general building construction (First Revision) |
CED 7 |
| 6 |
IS 803 : 1976 |
Code of Practice for Design, Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks (First Revision) |
CED 7 |
| 7 |
IS 807 : 2006 |
Design, erection and testing (Structural Portion) of cranes and hoists - Code of practice (Second Revision) |
MED 14 |
| 8 |
IS 3938 : 1983 |
Specification for electric wire rope hoists (Second Revision) |
MED 14 |
| 9 |
IS 4137 : 2015 |
Heavy duty electric overhead travelling cranes including special service machines for use in steel work - Code of practice (Second Revision) |
MED 14 |
| 10 |
IS 4009 : Part 1 : 1981 |
Specification for grease nipples: Part 1 button head grease nipples (First Revision) |
PGD 19 |
| 11 |
IS 4009 : Part 2 : 1981 |
Specification for grease nlpples: Part 2 conical head grease nipples (First Revision) |
PGD 19 |
| 12 |
IS 4038 : 1986 |
Specification for foot valves for water works purposes (second revision) |
CED 3 |
| 13 |
IS 2015 : 1977 |
Specification for t - Nuts (First Revision) |
PGD 35 |
| 14 |
IS 14418 : 1996 |
Bulk handling equipment - Ship loader - Rail mounted - Design, manufacture and erection - Code of practice |
MED 7 |
| 15 |
IS 14417 : 1996 |
Bulk handling equipment - Single boom slewable stacker - Rail mounted - Design, manufacture and erection - Code of practice |
MED 7 |
| 16 |
IS 14416 : 1996 |
Bulk handling equipment - Boom type bucket wheel reclaimer - Rail mounted - Design, manufacture and erection - Code of practice |
MED 7 |
| 17 |
IS 13082 : Part 1 : 1991 |
Bulk handling equipment - Ship unloader - Gantry mounted grab type - Code of practice for design, manufacture and erection:: Part 1 mechanical and structural requirements |
MED 7 |
| 18 |
IS 13065 : 1991 |
Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements |
MED 7 |
| 19 |
IS 6843 : 1984 |
Technical Supply Condition For Pipe Cutters (First Revision) |
PGD 34 |
| 20 |
IS 9999 : 1981 |
Specification for diesel locomotives for use in mines |
MED 8 |
| 21 |
IS 2361 : 2002 |
Bulldog grips - Specification (Third Revision) |
MED 10 |
| 22 |
IS 1367 : Part 1 : 2014 |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) |
PGD 37 |
| 23 |
IS 1367 : Part 7 : 1980 |
Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision) |
PGD 37 |
| 24 |
IS 1367 : Part 10 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision) |
PGD 37 |
| 25 |
IS 1367 : Part 18 : 1996 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision) |
PGD 37 |
| 26 |
IS 1367 : Part 19 : 1997 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs |
PGD 37 |
| 27 |
IS 14394 : 1996 |
Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36) |
PGD 37 |
| 28 |
IS 14962 : Part 5 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing |
PGD 37 |
| 29 |
IS 15568 : 2005 |
Cone proof load test on nuts |
PGD 37 |
| 30 |
IS 15569 : 2005 |
Widening test on nuts |
PGD 37 |
| 31 |
IS 2585 : 2006 |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) |
PGD 37 |
| 32 |
IS 2687 : 1991 |
Capnuts - Specification (Second Revision) |
PGD 37 |
| 33 |
IS 7795 : 2004 |
Hexagon nuts with collar - Specification (First Revision) |
PGD 37 |
| 34 |
IS/ISO 3449 : 2005 |
Earth - Moving machinery - Falling - Opject protective structures - Laboratory tests and performance requirements |
MED 7 |
| 35 |
IS/ISO3471 : 2008 |
Earth-Moving Machinery - Roll-Over Protective Structures-Laboratory Tests and Performance Requirements |
MED 7 |
| 36 |
IS 2486 : Part 1 : 1993 |
Metal fittings of insulators for overhead power lines with nominal voltage greater than 1 000 V - Specification: Part 1 general requirements and tests (Second Revision) |
ETD 6 |
| 37 |
IS 12405 : 1988 |
Specification for gear type flexible couplings |
PGD 33 |
| 38 |
IS 6623 : 2004 |
High Strength Structural Nuts |
PGD 37 |
| 39 |
IS 6204 : 1971 |
Specification for cast open roller fairleads |
TED 17 |
| 40 |
IS 6195 : 1971 |
Specification for cast open chocks |
TED 17 |
| 41 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 42 |
IS 13723 : 2018 |
Hexagon High Nuts (Style 2) With Metric Fine Pitch Thread - Product Grades A and B (Second Revision) |
PGD 37 |
| 43 |
IS 7002 : 2018 |
Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision) |
PGD 37 |
| 44 |
IS 13722 : 2002 |
Hexagon regular nuts (Style 1) with metric fine pitch thread - Product grades A and B (Second Revision) |
PGD 37 |
| 45 |
IS 13724 : 2018 |
Hexagon thin nuts chamfered (Style 0) with metric fine pitch thread - Product grades A and B (Second Revision) |
PGD 37 |
| 46 |
IS 15581 : 2018 |
Hexagon nuts with flange, style 2 - Coarse thread (First Revision) |
PGD 37 |
| 47 |
IS 1364 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) |
PGD 37 |
| 48 |
IS 1364 : Part 4 : 2003 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision) |
PGD 37 |
| 49 |
IS 1364 : Part 6 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision ) |
PGD 37 |
| 50 |
IS 1367 : Part 6 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
| 51 |
IS 1367 : Part 8 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision ) |
PGD 37 |
| 52 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
| 53 |
IS 6392 : 2020 |
Steel Pipes Flanges — Specification ( First Revision ) |
MTD 19 |
| 54 |
IS/IEC 60110 : Part 1 : 1998 |
Power Capacitors for Induction Heating Installations Part 1 General (First Revision) |
ETD 29 |
| 55 |
IS 10613 : 2014 |
Cycles - Safety requirements for bicycles (Second Revision) |
TED 16 |
| 56 |
IS 14106 : 2018 |
Direct action hand pumps - Specification (First Revision) |
MED 27 |
| 57 |
IS 4351 : 2003 |
Steel Door Frames -Specification ( Second Revision) |
CED 11 |
