1
IS 7192 : 2022
Citrus Fruits - Guide for Storage (First Revision)
FAD 10
1
Code of Practice
2
IS 609 : 2020
Improvement of Existing Structures Used or Intended to be Used for Food Grain Storage — Code of Practice ( First Revision )
FAD 16
1
Code of Practice
3
IS 1009 : 2023
Maida - Specification(Third Revision of IS 1009)
FAD 16
3
Product Specification
4
IS 1010 : 2021
SEMOLINA (SUJI OR RAWA) - SPECIFICATION(SECOND REVISION OF IS 1010)
FAD 16
2
Product Specification
5
IS 5503 : Part 2 : 2020
General Requirements for Silos for Grain Storage Part 2 Grain Handling Equipment and Accessories ( First Revision )
FAD 16
1
Code of Practice
6
IS 6151 : Part 1 : 2020
Storage Management Code Part 1 Terminology ( First Revision )
FAD 16
1
Terminology
7
IS 13863 : 1993
Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph
FAD 16
Methods of tests
8
IS 13864 : 2015
Wheat - Determination of the sedimentation index - Zeleny test (First Revision)
FAD 16
1
Methods of tests
9
IS 1518 : 1980
Method for gauging of petroleum and liquid petroleum products (First Revision)
PGD 26
1
Methods of tests
10
IS 303 : 2024
Plywood for General Purposes — Specification (Fourth Revision)
CED 20
4
Product Specification
11
IS 4841 : 2022
Impermeable sintered metal materials and hardmetals Determination of density
MTD 25
2
Methods of tests
12
IS/ISO 7507 : Part 3 : 2006
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 3 Optical-Triangulation Method
PGD 26
Methods of tests
13
IS 7438 : 2022
Metallic powders Determination of acid-insoluble content in iron copper tin and bronze powders
MTD 25
2
Methods of tests
14
IS/ISO 17584 : 2022
Refrigerant properties (First Revision)
MED 3
1
Others
15
IS 15574 : 2022
Sintered metal materials excluding hardmetals Unnotched impact test piece
MTD 25
1
Methods of tests
16
IS 17585 : 2021
Beta (Outflow) valves for gravity type flushing cisterns - Specification
CED 3
Product Specification
17
IS 17453 : 2020
Food Safety and Hygiene - Code of Practice for Food Businesses during Epidemic/Pandemic Situations with Specific Reference to COVID-19
FAD 15
Code of Practice
18
IS/ISO/IEC/TS 17021 : Part 12 : 2021
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 12 : Competence requirements for auditing and certification of collaborative business relationship management systems
MSD 14
Others
19
IS 15900 : 2010
Guidance on fraud and corruption control by an organization
MSD 10
Others
20
IS 17141 : Part 5 : 2021
Hardened concrete - Methods of test: Part 2 Properties of hardened concrete other than strength: Section 4 Determination of the carbonation resistance by accelerated carbonation method (first revision)
PGD 26
Methods of tests
21
IS 6299 : 2024
Handling, Testing and Storage of Monochrome Photographic Prints — Guide (First Revision)
MSD 5
1
Process Specification
22
IS 15820 : 2024
Establishment and Operation of Assaying and Hallmarking Centres — General Requirements (First Revision)
MTD 10
1
Code of Practice
23
IS 655 : 2006
Air ducts - Specification (Second Revision)
MED 3
2
Product Specification
24
IS 1474 : 1959
Specification for commercial refrigerators
MED 3
Product Specification
25
IS 2370 : 2014
Walk - In cold rooms - Specification (First Revision)
MED 3
1
Product Specification
26
IS 5111 : 1993
Testing of refrigerant compressors (First Revision)
MED 3
1
Methods of tests
27
IS 7613 : 1975
Method of testing panel type air filters for air - Conditioning and ventilation purposes
MED 3
Methods of tests
28
IS 11327 : 2022
Requirements for Refrigerants Condensing Units (Second Revision)
MED 3
2
Product Specification
29
IS 11330 : 2021
Refrigeration Oil Separator General Specification Construction Requirements and Testing
MED 3
1
Product Specification
30
IS 12249 : 2021
Specification for Desiccant Driers
MED 3
1
Product Specification
31
IS/ISO 4708 : 2017
Solid biofuels - Determination of bulk density
MED 30
Methods of tests
32
IS 14625 : 2015
Plastics Feeding Bottles (First Revision)
PCD 21
1
Product Specification
33
IS/ISO 10993 : Part 18 : 2020
Biological evaluation of medical devices Part 18 Chemical characterization of medical device materials within a risk management process
MHD 19
Methods of tests
34
IS 5193 : 1998
Rubber sealing rings for domestic fruit and vegetable preserving jars specification (First Revision)
PCD 13
1
Product Specification
35
IS 10840 : 1994
Blow moulded HDPE containers for packing of vanaspati - Specification (Second Revision)
PCD 21
2
Product Specification
36
IS 12887 : 1989
Polyethylene terephthalate (PET) bottles for packaging of edible oils - Specification
PCD 21
Product Specification
37
IS 14129 : 1994
Flexible packaging materials for the packing of vanaspati in 10 kg and 15 kg packs - Specificaiton
PCD 21
Product Specification
38
IS 14537 : 1998
Polyethylene terephthalate (PET) bottles for packaging of alcoholic liquors - Specification
PCD 21
Product Specification
39
IS 14636 : 1998
Flexible packaging materials for packaging of edible oils, ghee and vanaspati
PCD 21
Product Specification
40
IS 15410 : 2003
Containers for packaging of natural mineral water and packaged drinking water - Specification
PCD 21
Product Specification
41
IS 15473 : 2004
Blow moulded HDPE containers for packaging of edible oils - Specification
PCD 21
Product Specification
42
IS 15532 : 2004
Plastics crates for fruits and vegetables - Specification
PCD 21
Product Specification
43
IS 15749 : 2007
Fluorinated HDPE bottles and containers - Specification
PCD 21
Product Specification
44
IS 10171 : 1999
Guide on suitability of plastics for food packaging (Second Revision)
PCD 21
2
Code of Practice
45
IS/ISO/IEC/TS 17021 : Part 11 : 2018
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 11: Competence requirements for auditing and certification of facility management FM management systems
MSD 14
Others
46
IS 17772 : Part 2 : 2022
Ophthalmic optics Semi-finished spectacle lens blanks Part 2: Specifications for progressive-power and degressive-power lens blanks
MHD 5
Product Specification
47
IS 13649 : 1993
Textiles - polyethylene lined jute bags for packing tea - specification
TXD 3
Product Specification
48
IS 15138 : 2010
Textiles – Jute bags for packing 50 kg sugar – Specification (first revision)
TXD 3
Product Specification
49
IS 1943 : 1995
Textiles - A-twill jute bags - specification (second revision)
TXD 3
2
Product Specification
50
IS 2566 : 1993
Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)
TXD 3
3
Product Specification
51
IS 9846 : 1981
Grading of uncut Indian MESTA
TXD 3
Others
52
IS 17550 : Part 1 : 2021
HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements
MED 3
Product Specification
53
IS 17772 : Part 1 : 2022
Ophthalmic optics Semi-finished spectacle lens blanks Part 1: Specifications for single-vision and multifocal lens blanks
MHD 5
Product Specification
54
IS 14618 : 2022
Automotive vehicles Air-conditioning and heating systems thermal performance Method of measurement (Second Revision)
MED 3
2
Methods of tests
55
IS 302 : Part 2 : Sec 13 : 1994
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 13 frying pans, deep fat fryers and similar appliances
ETD 32
Product Specification
56
IS 17693 : 2022
Non-electric Cooling Cabinet Made of Clay
MED 3
Product Specification
57
IS 2556 : Part 8 : 2021
Vitreous China sanitary appliances - Specification: Part 8 Specific requirements of close coupled and one-piece, pedestal washdown and syphonic water closets (sixth revision)
CED 3
6
Product Specification
58
IS 1199 : Part 4 : 2018
Fresh Concrete - Methods of Sampling, Testing and Analysis: Part 4 Determination of Air Content of Fresh Concrete ( First Revision )
CED 2
Methods of tests
59
IS 774 : 2021
Ceramic (Vitreous China) flushing cisterns for water closets and urinals - Specification (sixth revision)
CED 3
6
Product Specification
60
IS 2191 : Part 2 : 2022
WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)
CED 11
4
Product Specification
61
IS 1296 : 2024
HOUSEHOLD SEWING MACHINE — PRESSER FOOT — SPECIFICATION
MED 29
4
Product Specification
62
IS 1297 : 2024
HOUSEHOLD SEWING MACHINE � PRESSER BAR � SPECIFICATION
MED 29
4
Product Specification
63
IS 9152 : 2023
Industrial Sewing Machines � Glossary of Terms and Identification Symbols
MED 29
1
Terminology
64
IS 14883 : 2022
Mechanical Vibration and Shock Mechanical Mounting of Accelerometers First Revision
MED 28
1
Code of Practice
65
IS 15545 : Part 2 : 2021
Rotary shaft lip - Type seals incorporating thermoplastic sealing elements: Part 2 vocabulary
MED 30
1
Terminology
66
IS 1160 : 1993
Metric dispensing measures - Specification (First Revision)
PGD 26
1
Product Specification
67
IS 1105 : 1957
Method for precise conversion of inch and metric dimensions to ensure interchangeability
PGD 1
Methods of tests
68
IS 1056 : 2004
COMMERCIAL WEIGHTS — SPECIFICATION (Third Revision)
PGD 26
3
Product Specification
69
IS 1057 : 2004
Commercial carat weights - Specification (Third Revision)
PGD 26
3
Product Specification
70
IS 1058 : 1993
Legal metrology - Commercial capacity measures - Specification (Second Revision)
PGD 26
2
Product Specification
71
IS 1059 : 1994
Legal metrology - Commercial length measures (Non - Flexible) - Specification (First Revision)
PGD 26
1
Product Specification
72
IS 1269 : Part 1 : 1997
Leagal metrology - Material measures of length: Part 1 woven metallic and glass fiber tape measures (Second Revision)
PGD 26
2
Product Specification
73
IS 1269 : Part 2 : 1997
Legal metrology - Material measures of length: Part 2 steel tape measures
PGD 26
Product Specification
74
IS 1433 : 1990
Beam scales - Specification (Second Revision)
PGD 26
2
Product Specification
75
IS 1434 : 1959
Specification for counter machines
PGD 26
Product Specification
76
IS 14439 : Part 1 : 1997
Legal metrology - Gas volume meters: Part 1 general requirements
PGD 26
Product Specification
77
IS 14439 : Part 2 : 1998
Leagal metrology - Gas volume meters: Part 2 diaphagm gas meters
PGD 26
Product Specification
78
IS 15672 : 2006
Flow measurement of natural gas and fluids by coriolis meters
PGD 26
Product Specification
79
IS 15673 : 2006
Folow mesasurment of natural gas by rotary piston meters
PGD 26
Product Specification
80
IS 15674 : 2006
Flow measurement of natural gas by ultrasonic meter
PGD 26
Product Specification
81
IS 15675 : 2006
Flow measurement of natural gas and fluids by orifice plate meters
PGD 26
Product Specification
82
IS 3515 : 1966
Specification For Tapes For Use In Measurement Of Oil Quantities
PGD 26
Product Specification
83
IS 11526 : 2013
Pliers and nippers - Nomenclature (First Revision)
PGD 34
1
Product Specification
84
IS 10372 : 1982
Specification for lock - Grip pliers
PGD 34
Product Specification
85
IS 11847 : 1987
Specification for spoke wrenches for bicycle and moped
PGD 34
Product Specification
86
IS 11848 : 1987
Specification for crowfoot spanners
PGD 34
Product Specification
87
IS 11874 : 1986
Specification for . hexagonal socket offset wrenches
PGD 34
Product Specification
88
IS 12153 : 1987
Specification for adapters for hexagonal insert bits for use with ratchet screw drivers
PGD 34
Product Specification
89
IS 12166 : 1987
Specification for ratchet screwdrivers
PGD 34
Product Specification
90
IS 12167 : 1987
Specification for spiral ratchet screw drivers
PGD 34
Product Specification
91
IS 12168 : Part 1 : 1987
Specification for screwdriver bits for use with ratchet screwdrivers: Part 1 for slotted head screws
PGD 34
Product Specification
92
IS 12168 : Part 2 : 1987
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws
PGD 34
Product Specification
93
IS 12403 : 1988
Specification for spanners for conveyor belt - Fasteners
PGD 34
Product Specification
94
IS 12453 : 1988
Specification for nut drivers
PGD 34
Product Specification
95
IS 12470 : 1988
Specification for square drive extension for hexagon insert bits for power socket wrenches
PGD 34
Product Specification
96
IS 12476 : 1988
Specification for hexagon drive extensions (Adaptors) for hexagon insert bits for power socket wrenches
PGD 34
Product Specification
97
IS 12480 : 1988
Specification for spiral tapered screw extractors
PGD 34
Product Specification
98
IS 12481 : 1988
Specification for hexagonal insert bits for hexagon socket head cap screws and hexagon socket set screws for power tools
PGD 34
Product Specification
99
IS 12577 : 1989
Sealing pliers - Specification
PGD 34
Product Specification
100
IS 12985 : 1990
Nippers, end - Cutting - Toggle lever assisted - Specification
PGD 34
Product Specification
101
IS 13636 : 1993
Pliers and nippers for electronics - Technical supply conditions
PGD 34
Terminology
102
IS 13761 : 1993
Pliers and nippers for electronics - Single purpose nippers - End cutting nippers - Specification
PGD 34
Product Specification
103
IS 13762 : 1993
Pliers and nippers for electronics - Single purpose nippers - Diagonal cutting nippers - Specification
PGD 34
Product Specification
104
IS 13763 : 1993
Pliers and nippers for electronics - Single purpose nippers - Oblique cutting nippers - Specification
PGD 34
Product Specification
105
IS 13764 : 1993
Pliers and nippers for electronics - Single purpose pliers - Round nose pliers - Specification
PGD 34
Product Specification
106
IS 13765 : 1993
Pliers and nippers for electronics - Single purpose pliers - Flat nose pliers - Specification
PGD 34
Product Specification
107
IS 13766 : 1993
Pliers and nippers for electronics - Single purpose pliers - Snipe nose pliers - Specification
PGD 34
Product Specification
108
IS 13887 : 1993
Nippers - Lever assisted - Diagonal cutting - Specification
PGD 34
Product Specification
109
IS 13888 : 1993
Nippers - Lever assisted - End cutting - Specification
PGD 34
Product Specification
110
IS 1931 : 2000
ENGINEER’S FILES — SPECIFICATION ( Third Revision)
PGD 34
3
Product Specification
111
IS 2028 : 2004
Open jaw wrenches (Spanners) - Specification (Fijih Revision)
PGD 34
5
Product Specification
112
IS 2029 : 1998
Ring wrenches (Spanners) - Specification (Fourth Revision)
PGD 34
4
Product Specification
113
IS 2030 : 1989
Box spanners - Specification (Second Revision)
PGD 34
2
Product Specification
114
IS 3082 : 2008
Assembly tools for screws and nuts - hexagon socket screw keys (Third Revision)
PGD 34
3
Product Specification
115
IS 3152 : 1980
Specification for needle files (First Revision)
PGD 34
1
Product Specification
116
IS 3529 : 1966
Specification for eyelet pliers
PGD 34
Product Specification
117
IS 3568 : 1990
Round nose pliers - Specification (First Revision)
PGD 34
1
Product Specification
118
IS 3569 : 1966
Specification for burner pliers
PGD 34
Product Specification
119
IS 3650 : 1981
Specification for combination side cutting pliers (Second Revision)
PGD 34
2
Product Specification
120
IS 4003 : Part 1 : 1978
Specification for pipe wrenches: Part 1 general purpose (First Revision)
PGD 34
1
Product Specification
121
IS 4003 : Part 2 : 1986
Specification for pipe wrenches: Part 2 heavy duty (First Revision)
PGD 34
1
Product Specification
122
IS 4095 : 1991
Pincers - Specification (Second Revision)
PGD 34
2
Product Specification
123
IS 4123 : 1982
Specification for chain pipe wrenches (First Revision)
PGD 34
1
Product Specification
124
IS 4481 : 1988
Specification for duck - Bill pliers (First Revision)
PGD 34
1
Product Specification
125
IS 4485 : 1968
Specification for track spanners for railways
PGD 34
Product Specification
126
IS 4508 : 1992
Open ended slugging wrenches (Spanners) - specification (First Revision)
PGD 34
1
Product Specification
127
IS 4509 : 1992
Ring slugging wrenches (Spanners) - specification (First Revision)
PGD 34
1
Product Specification
128
IS 4806 : 1968
Specification For Heat Coil Pliers
PGD 34
Product Specification
129
IS 5006 : 1968
Specification for battery terminal pliers
PGD 34
Product Specification
130
IS 5066 : 1969
Specification for glass pliers
PGD 34
Product Specification
131
IS 5067 : 1969
SpecificatfOn for fencing pliers
PGD 34
Product Specification
132
IS 5068 : 1969
Specification for grab hook
PGD 34
Product Specification
133
IS 5087 : 1969
Specification for wire stripping pliers
PGD 34
Product Specification
134
IS 5122 : 1969
Specification for tyre levers
PGD 34
Product Specification
135
IS 5200 : 1998
Bolt clippers - Specification (First Revision)
PGD 34
1
Product Specification
136
IS 5658 : 1990
Snipe nose pliers - Specification (First Revision)
PGD 34
1
Product Specification
137
IS 5995 : 1971
Specification for pipe grip pliers
PGD 34
Product Specification
138
IS 6002 : 1992
Tommy bars for box spanners - Specification (First Revision)
PGD 34
1
Product Specification
139
IS 6086 : 2016
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values (Second Revision)
PGD 34
2
Product Specification
140
IS 6129 : 1971
Specification for square box wrenches (Spanners)
PGD 34
Product Specification
141
IS 6130 : 1989
Single square socket tee wrenches (Spanners) - Specification
PGD 34
1
Product Specification
142
IS 6131 : 1980
Technical requirements for, hand operated wrenches (Spanners) and sockets (First Revision)
PGD 34
1
Product Specification
143
IS 6149 : 1984
Specification for single - Ended open - Jaw adjustable wrenches (First Revision)
PGD 34
1
Product Specification
144
IS 6374 : 1971
Specification for hexagonal box wrenches (Spanners)
PGD 34
Product Specification
145
IS 6379 : 1989
Single ended ring wrenches (Spanners) - Specification (First Revision)
PGD 34
1
Product Specification
146
IS 6389 : 1998
Combination wrenches with equal openings - Specification (Second Revision)
PGD 34
1
Product Specification
147
IS 7214 : 1974
Specification for driving squares for hand socket wrenches
PGD 34
Product Specification
148
IS 7381 : 1986
Specification for hand operated square drive socket wrenches (First Revision)
PGD 34
1
Product Specification
149
IS 7663 : 1975
Specification for box spanners for rail screws
PGD 34
Product Specification
150
IS 7939 : 1976
Specification for flare nut wrench, double ended, flat
PGD 34
Product Specification
151
IS 1199 : Part 1 : 2018
Fresh Concrete - Methods of Sampling, Testing and Analysis Part 1 Sampling of Fresh Concrete ( First Revision )
CED 2
Methods of tests
152
IS/ISO 4709 : 2017
Solid biofuels - Determination of length and diameter of pellets
MED 30
Product Specification
153
IS 1199 : Part 2 : 2018
Fresh Concrete - Methods of Sampling, Testing and Analysis: Part 2 Determination of Consistency of Fresh Concrete ( First Revision )
CED 2
Methods of tests
154
IS 1199 : Part 3 : 2018
Fresh Concrete - Methods of Sampling, Testing and Analysis: Part 3 Determination of Density of Fresh Concrete ( First Revision )
CED 2
Methods of tests
155
IS/ISO 603 Part 1 : 1999
Bonded abrasive products - Dimensions: Part 1 grinding wheels for external cylindrical grinding between centres
PGD 9
Dimensions
156
IS 6595 : Part 1 : 2018
Horizontal centrifugal pumps for clear, cold water - Specification: Part 1 agricultural and rural water supply purposes (Fourth Revision)
MED 20
4
Product Specification
157
IS 4595 : 1969
GENERAL REQUIREMENTS FOR NON-SPARKING TOOLS
PGD 34
Product Specification
158
IS 7990 : 1976
Specification for pliers for external circlips
PGD 34
Product Specification
159
IS 7991 : 2016
Attachment for hand operated square drive socket wrenches - Specification (Second Revision)
PGD 34
2
Product Specification
160
IS 7993 : 1988
Specification for power operated square drive socket wrenches (Impact) (First Revision)
PGD 34
1
Product Specification
161
IS 7996 : 1976
Specification for driving squares for power socket wrenches
PGD 34
Product Specification
162
IS 844 : Part 2 : 1979
Specification for screwdrivers: Part 2 dimensions (Second Revision)
PGD 34
2
Product Specification
163
IS 844 : Part 3 : 1979
Specification for screw drivers: Part 3 dimensions for screw drivers for recessed head screws (Second Revision)
PGD 34
2
Product Specification
164
IS 844 : Part 1 : 1979
Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn)
PGD 34
2
Code of Practice
165
IS 8668 : 1984
Dimensions for spiral ratchet screw driver shanks (First Revision)
PGD 34
1
Dimensions
166
IS 8669 : 2014
Assembly tools for screws and nuts - Drive ends for hand - And machine - Operated screwdriver bits and connecting parts - Dimensions, torque testing (Second Revision)
PGD 34
2
Dimensions
167
IS 8670 : 1977
Specification for screwdrivers for hexagon insert bits
PGD 34
Product Specification
168
IS 8672 : 1989
Pliers - Flat nose without cutter, short - Specification (First Revision)
PGD 34
1
Product Specification
169
IS 9063 : 1986
Specification for hook spanners (First Revision)
PGD 34
1
Product Specification
170
IS 7975 : Part 1 : 1976
Specification for driving parts for hand - Operated square drive socket wrenches: Part 1 technical supply conditions
PGD 34
Product Specification
171
IS 10198 : 1982
Specification for carbon steel, safety razor blades
PGD 14
Product Specification
172
IS 10375 : 1982
Specification for poker
PGD 34
Product Specification
173
IS 10826 : 1984
Specification for pad saw
PGD 34
Product Specification
174
IS 10827 : 1984
Specification for roving punches
PGD 34
Product Specification
175
IS 10838 : 1984
Specification for nylon faced hammers
PGD 34
Product Specification
176
IS 10839 : 1984
Jewellers' Saw
PGD 34
Product Specification
177
IS 10860 : 1984
Carpenters' Wooden Bodied Bead Planes
PGD 34
Product Specification
178
IS 10883 : 1984
Specification for single wheel type pipe cutters
PGD 34
Product Specification
179
IS 10886 : 1984
Carpenters' Vice
PGD 34
Product Specification
180
IS 11250 : 1985
Specification for bow saw frames
PGD 34
Product Specification
181
IS 11251 : 1985
Specification for bow saw blades
PGD 34
Product Specification
182
IS 11381 : 1985
Specification for extractor cotter pin
PGD 34
Product Specification
183
IS 11458 : 1985
Specification For Parallel Clamps
PGD 34
Product Specification
184
IS 11828 : 1987
Specification for miniature hand hacksaw frames
PGD 34
Product Specification
185
IS 11940 : 1987
Specification for hide - Faced hammers
PGD 34
Product Specification
186
IS 11941 : 1987
Specification For Hand Burnishers
PGD 34
Product Specification
187
IS 12127 : 1987
Specification for two - Men cross cut saws
PGD 34
Product Specification
188
IS 12128 : 1987
Specification for reversible handles for cross cut saws
PGD 34
Product Specification
189
IS 12412 : 1988
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws
PGD 34
Product Specification
190
IS 12413 : 1988
Specification for wooden jointer for two - Men cross cut saws
PGD 34
Product Specification
191
IS 12515 : 1988
Specification for wooden setting cat for two - Men cross cut saws
PGD 34
Product Specification
192
IS 12522 : 1988
Specification for rubber mallets
PGD 34
Product Specification
193
IS 12578 : 1989
Watch Maker's Hammer, Flat Face
PGD 34
Product Specification
194
IS 12858 : 1989
Belt punches for conveyor belt fasteners (Plate type) - Specification
PGD 34
Product Specification
195
IS 13040 : 1991
Dolly blocks for use in steel body repairs - General requirements
PGD 34
Product Specification
196
IS 13093 : 2002
Sheet metal body repair steel hammers - General requirements (First Revision)
PGD 34
1
Product Specification
197
IS 13189 : 1991
Lead hammers - Specification
PGD 34
Product Specification
198
IS 13345 : 1992
Carpenter’s Bevels - Specification
PGD 34
Product Specification
199
IS 15385 : 2003
Wood working tools - Metal - Bodied bench planes, plane cutters and cap irons
PGD 34
Product Specification
200
IS 1759 : 1986
Specification for powrahs (Second Revision)
PGD 34
2
Product Specification
201
IS 1930 : 2003
Woodworking tools - Chisels and gouges (Third Revision)
PGD 34
3
Product Specification
202
IS 2586 : 1986
Specification for bench vices (Second Revision)
PGD 34
2
Product Specification
203
IS 2587 : 1975
Specification for pipe vices (Open Side Type And Fixed Sides Type) (First Revisicn)
PGD 34
1
Product Specification
204
IS 2588 : 1975
Specification for Blacksmiths vice ( First Revision )
PGD 34
1
Product Specification
205
IS 273 : 1990
Picks and beaters - specification (Fourth Revision)
PGD 34
4
Product Specification
206
IS 2852 : 1998
CARPENTERS’ AUGERS - SPECIFICATION ( First Revision )
PGD 34
1
Product Specification
207
IS 2989 : 1980
Specification for keys for lathe chucks (First Revision)
PGD 34
1
Product Specification
208
IS 4017 : 1992
CARPENTERS SQUARES - SPECIFICATION ( First Revision )
PGD 34
1
Product Specification
209
IS 402 : 1990
Cold chisels - Specification (Third Revision)
PGD 34
3
Product Specification
210
IS 413 : 1974
Specification for round punches (Second Revision)
PGD 34
2
Product Specification
211
IS 510 : 1986
Specification for Blacksmiths anvil (Third Revision)
PGD 34
3
Product Specification
212
IS 552 : 1965
Specification for smith bits (Revised)
PGD 34
Product Specification
213
IS 663 : 1980
Specification for adzes (Second Revision)
PGD 34
2
Product Specification
214
IS 11189 : 2020
Methods of Tubewell Development ( First Revision )
MED 21
1
Code of Practice
215
IS 11632 : 2020
Code of Practice of Rehabilitation of Tubewells ( First Revision )
MED 21
1
Code of Practice
216
IS 9439 : 2022
Glossary of Terms Used in Water-well Drilling Technology
MED 21
2
Terminology
217
IS 10236 : Part 1 : 1989
Procedure for basic climatic and durability tests for optical instruments: Part 1 general
PGD 39
Methods of tests
218
IS 10236 : Part 10 : 1985
Procedure for basic climatic and durability tests for optical instruments: Part 10 bump test
PGD 39
Methods of tests
219
IS 10236 : Part 13 : 1986
Procedure for basic climatic and durability tests for optical instruments: Part 13 dust test
PGD 39
Methods of tests
220
IS 10236 : Part 12 : 1985
Procedure for basic climatic and durability tests for optical instruments: Part 12 shock test
PGD 39
Methods of tests
221
IS 703 : 1999
Axes - Specification (Second Revision)
PGD 34
2
Product Specification
222
IS 704 : 1984
Specification for crow - Bars and claw - Bars (Second Revision)
PGD 34
2
Product Specification
223
IS 842 : 1968
Smith's Swages
PGD 34
1
Product Specification
224
IS 843 : 1968
SPECIFICATION FOR SMITH’S TONGS (First Revision)
PGD 34
1
Product Specification
225
IS 845 : 1974
Specification for swage blocks and stands (Firsf Revision)
PGD 34
1
Product Specification
226
IS 846 : 1968
Specification for Smith flatters (First Revision)
PGD 34
1
Product Specification
227
IS 847 : 1968
Specification for Smith Fullers (First Revision)
PGD 34
1
Product Specification
228
IS 4506 : 1989
Hand tools - Fork & general purpose - Specification (First Revision)
PGD 34
1
Product Specification
229
IS 4915 : 1968
Specification for welders chipping hammer
PGD 34
Product Specification
230
IS 5098 : 1969
Specification for cross - Cut and rip saws
PGD 34
Product Specification
231
IS 5123 : 1969
Specification for tenon and dovetail saws
PGD 34
Product Specification
232
IS 6541 : 2024
Code for Hygienic Conditions Required for Preparation and Supply of FoodsMeals in Schools (First revision)
FAD 15
1
Code of Practice
233
IS 5169 : 1986
Specification for hacksaw frames (First Revision)
PGD 34
1
Product Specification
234
IS 5657 : 1970
Specification for jim crows
PGD 34
Product Specification
235
IS 5663 : 1970
Specification for Brick and Mason
PGD 34
Product Specification
236
IS 5684 : 1970
Specification for pipe vices (Chain Type)
PGD 34
Product Specification
237
IS 5697 : 1970
Specification for ripping chisels
PGD 34
Product Specification
238
IS 5991 : 1971
Specification for ballast rakes
PGD 34
Product Specification
239
IS 6000 : 1971
Specification for rail tongs for railways
PGD 34
Product Specification
240
IS 6007 : 1971
Specification for pipe vices (Hinged Type)
PGD 34
Product Specification
241
IS 6087 : 1971
Specification for metal cutting shears
PGD 34
Product Specification
242
IS 6375 : 1991
Wood splitting wedges - Specification (First Revision)
PGD 34
1
Product Specification
243
IS 6546 : 1989
Claw hammers - Specification (First Revision)
PGD 34
1
Product Specification
244
IS 6835 : 1973
Specification for drifts
PGD 34
Product Specification
245
IS 6836 : 1973
Specification for hand snaps and set - Ups for solid rivets
PGD 34
Product Specification
246
IS 6837 : 1973
Specification for three wheel type pipe cutter
PGD 34
Product Specification
247
IS 6841 : 1973
Specification for wrecking bars
PGD 34
Product Specification
248
IS 6843 : 1984
Technical Supply Condition For Pipe Cutters (First Revision)
PGD 34
1
Code of Practice
249
IS 6844 : 1984
Specification - For wood and leather marking punches (First Revision)
PGD 34
1
Product Specification
250
IS 6845 : 1973
Specification for wire basket for screening ballast
PGD 34
Product Specification
251
IS 6860 : 1973
Specification for pin punches
PGD 34
Product Specification
252
IS 6861 : 1973
Specification for engineers scrapers
PGD 34
Product Specification
253
IS 6864 : 1984
Specification for metal marking punches (First Revision)
PGD 34
1
Product Specification
254
IS 6881 : 1973
Specification for link type pipe cutters
PGD 34
Product Specification
255
IS 6883 : 1973
Specification for ballast screen
PGD 34
Product Specification
256
IS 6891 : 1973
Carpenters' Auger Bits
PGD 34
Product Specification
257
IS 6892 : 1973
Specification for Blacksmiths bick iron
PGD 34
Product Specification
258
IS 7040 : 1973
Specification for Smiths anvil cutters
PGD 34
Product Specification
259
IS 7041 : 1973
Specification for carpenters plain brace
PGD 34
Product Specification
260
IS 7042 : 1973
Carpenters' Ratchet Brace
PGD 34
Product Specification
261
IS 7077 : 1973
Specification for bending bars
PGD 34
Product Specification
262
IS 7125 : 1974
Technical supply conditions for carpenters' braces
PGD 34
Others
263
IS 7177 : 1974
Specification for centre punches
PGD 34
1
Product Specification
264
IS 7958 : 1976
Specification for hand vices
PGD 34
Product Specification
265
IS 8177 : 1976
Specification for pin vices
PGD 34
Product Specification
266
IS 8202 : 1999
Carpenter's Wooden Bodies Planes
PGD 34
1
Product Specification
267
IS 8671 : 1977
Specification for nail puller
PGD 34
Product Specification
268
IS 8673 : 1977
Specification for Farrier
PGD 34
Product Specification
269
IS 9064 : 1979
Specification for copper hammers
PGD 34
Product Specification
270
IS 9065 : 1979
Specification for aluminium hammers
PGD 34
Product Specification
271
IS 9181 : 1988
Specification for C - Clamps (First Revision)
PGD 34
1
Product Specification
272
IS 9193 : 1988
Specification for bearing pullers (First Revision)
PGD 34
1
Product Specification
273
IS 274 : Part 1 and 2 : 1981
Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision)
PGD 34
3
Product Specification
274
IS 7222 : 1974
Specification for engineers ratchet braces
PGD 34
Product Specification
275
IS 516 : Part 2 : Sec 2 : 2020
Hardened Concrete - Methods of Test: Part 2 Properties of Hardened Concrete other than Strength: Section 2 Initial surface absorption ( First Revision )
CED 2
Methods of tests
276
IS 2383 : 1963
Code of practice for calibration of vehicle tanks for petroleum products and other liquids
PGD 26
Code of Practice
277
IS 4670 : 1993
Legal Metrology - Liquor Measures - Specification (First Revision)
PGD 26
1
Product Specification
278
IS 1715 : 2002
Self-holding tapers -- Dimensions (third revision)
PGD 32
3
Dimensions
279
IS 1850 : 1961
Dimensions for shank diameters and driving squares for rotating tools
PGD 32
Dimensions
280
IS 1983 : 2004
Shank for turning and planing tools -- Shapes and dimensions of the section (second revision)
PGD 32
2
Dimensions
281
IS 2340 : 1972
Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision)
PGD 32
1
Dimensions
282
IS 2428 : 2007
Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application (second revision)
PGD 32
2
Others
283
IS/ISO/IEC/TR 17032 : 2019
Conformity assessment Guidelines and examples of a scheme for the certification of processes
MSD 14
Others
284
IS 554 : 1999
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision)
PGD 37
4
Dimensions
285
SP 42 : 2008
Survey of screw threads (First Revision)
PGD 37
1
Code of Practice
286
IS 919 : Part 1 : 2014
Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision)
PGD 20
Dimensions
287
IS 919 : Part 2 : 2014
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision)
PGD 37
1
Dimensions
288
IS/ISO 1501 : 2009
ISO miniature screw threads
PGD 37
Dimensions
289
IS 2102 : Part 1 : 1993
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision)
PGD 37
3
Dimensions
290
IS 2473 : 1975
Dimensions for centre holes (First Revision)
PGD 37
1
Dimensions
291
IS 2540 : 2008
Dimensions for threaded centre holes (First Revision)
PGD 37
1
Dimensions
292
IS 4218 : Part 1 : 2001
ISO general purpose metric screw threads: Part 1 basic profile - second revision)
PGD 37
2
Dimensions
293
IS 4218 : Part 2 : 2001
ISO general purpose metric screw threads: Part 2 general plan (Second Revision)
PGD 37
2
Dimensions
294
IS 4218 : Part 4 : 2001
ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision)
PGD 37
2
Dimensions
295
IS 16144 : 2014
Foodgrain storage godowns - Code of practice
FAD 16
Code of Practice
296
IS 4695 : Part 1 : 2003
General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision)
PGD 37
2
Dimensions
297
IS 4696 : Part 2 : 2004
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 2 PITCH DIAMETER COMBINATIONS (Second Revision)
PGD 37
1
Dimensions
298
IS 4696 : Part 3 : 2004
Dimensions for metric buttress threads: Part 3 basic dimensions (Second Revision)
PGD 37
2
Dimensions
299
IS 2818 : 2015
Textiles � Hessian � Specification (third revision)
TXD 3
Product Specification
300
IS 2186 : 1985
ISO metric external screw threads for interference fit applications (First Revision)
PGD 37
1
Dimensions
301
IS 2643 : 2005
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision)
PGD 37
3
Dimensions
302
IS 2769 : 1969
Sizes for squares and square holes for general engineering purposes (First Revision
PGD 37
1
Dimensions
303
IS 3403 : 1981
Dimensions for knurls (First Revision)
PGD 37
Dimensions
304
IS 3406 : Part 1 : 1986
Dimensions for countersinks and counterbores: Part 1 countersinks (Second Revision)
PGD 37
2
Dimensions
305
IS 3406 : Part 2 : 2014
Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision)
PGD 37
3
Dimensions
306
IS 2594 : 2003
Hacksaw blades -- Specification (second revision)
PGD 32
2
Product Specification
307
IS 4218 : Part 3 : 1999
ISO general purpose metric screw threads: Part 3 basic dimensions (Second Revision)
PGD 37
2
Dimensions
308
IS 4695 : Part 2 : 2003
General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision)
PGD 37
2
Dimensions
309
IS 4696 : Part 1 : 2004
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 1 THREAD PROFILES (Second Revision)
PGD 37
1
Dimensions
310
IS 3428 : 2009
Dimensions for relief grooves (Second Revision)
PGD 37
2
Dimensions
311
IS 3457 : 2009
Radii for rounding for general engineering purposes (Second Revision)
PGD 37
1
Dimensions
312
IS 4696 : Part 4 : 2005
Dimensions for metric buttress threads: Part 4 tolerancing system (Second Revision)
PGD 37
1
Dimensions
313
IS 7615 : 2003
System of cone tolerance for conical workpiece from c = 1:3 to 1:500 and lengths from 6 to 630 mm (Second Revision)
PGD 37
2
Dimensions
314
IS 7684 : 1975
LIMITS OF SIZES FOR ISO METRIC TRAPEZOIDAL NUT THREADS DIAMETER RANGE 8 TO 100 mm
PGD 37
Dimensions
315
IS 2668 : 2004
T-slot cutters with cylindrical shanks and with morse taper shanks having tapped hole (second revision)
PGD 32
1
Dimensions
316
IS 7685 : 1975
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 8 To 100 Mm)
PGD 37
Dimensions
317
IS 2669 : 1971
Specification for woodruff keyslot milling cutters with parallel shank (first revision)
PGD 32
1
Product Specification
318
IS 7726 : 1975
Limits of sizes for ISO metric trapezoidal nut threads (Diameter Range 105 To 300 Mm)
PGD 37
Dimensions
319
IS 2670 : 1991
Thread milling cutter shell type specification (first revision)
PGD 32
Product Specification
320
IS 2671 : 1964
Specification for interlocked milling cutters
PGD 32
Product Specification
321
IS 3019 : 1973
Specification for high speed steel butt -- Welded single point turning tools (first revision)
PGD 32
1
Product Specification
322
IS 7727 : 1975
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 105 To 300 Mm)
PGD 37
Dimensions
323
IS 3239 : 1994
Die stock for circular screwing dies -- Specification (second revision)
PGD 32
2
Product Specification
324
IS 8788 : 2002
Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision)
PGD 37
2
Dimensions
325
IS 4022 : 1996
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions (second revision)
PGD 32
2
Dimensions
326
IS 4914 : 1983
Specification for tap wrenches adjustable (first revision)
PGD 32
1
Product Specification
327
IS 10587 : 1983
Terminology for screw threads
PGD 37
Terminology
328
IS 4921 : 1968
Specification for extension bars
PGD 32
Product Specification
329
IS 8841 : 1978
Recommendations for limits and flTs for sizes above 3 i50 mm up to io 000 mm
PGD 37
Dimensions
330
IS 5030 : Part 2 : 2016
Metal cutting band saw blades: Part 2 Characteristics and dimensions (second revision)
PGD 32
2
Dimensions
331
IS 5030 : Part 3 : 2005
Metal cutting bandsaw blade -- Specification: Part 3 Dimensions and other requirements (second revision)
PGD 32
1
Product Specification
332
IS 5031 : 1992
Saws -- Metal slitting -- Specification (second revision)
PGD 32
2
Product Specification
333
IS 12186 : 1987
Tolerances for ISO - vietric trapezoidal screw threads for lead and feed screw assemblies
PGD 37
Dimensions
334
IS 5100 : 1969
Specification for twist drills, parallel shanks, stub series for right hand cutting
PGD 32
Product Specification
335
IS 14962 : Part 2 : 2001
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality
PGD 37
Dimensions
336
IS 5101 : 1991
Twist drills, parallel shank, jobber series -- Specification (first revision)
PGD 32
1
Product Specification
337
IS 5102 : 1969
Specification for twist drills, parallel shank, long series
PGD 32
Product Specification
338
IS 5360 : 1969
Dimensions for driving tenons
PGD 32
Dimensions
339
IS 5103 : 1969
Specification for twist drills, morse taper shanks
PGD 32
Product Specification
340
IS 14962 : Part 5 : 2001
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing
PGD 37
Dimensions
341
IS/ISO/TS 22003 : 2013
Food safety management systems - Requirements for bodies providing audit and certification of food safety management systems (First Revision)
FAD 15
1
System Standard
342
IS/ISO 8980 : Part 2 : 2017
Ophthalmic optics Uncut finished spectacle lenses Part 2: Specifications for power-variation lenses
MHD 5
Product Specification
343
IS 5104 : 1969
Specification for twist drills, oversize morse taper shank
PGD 32
Product Specification
344
IS 5105 : 1969
Specification for twist drills, taper square shanks for ratchet braces
PGD 32
Product Specification
345
IS 5106 : 1969
Specification for twist drills, taper square shanks for carpenters braces
PGD 32
Product Specification
346
IS 5362 : 1969
Specification for twist drills, parallel shanks, stub series, left hand cutting tor automatics
PGD 32
Product Specification
347
IS 5364 : 1969
Specification for twist drills for taper pin holes with taper 1 : 50
PGD 32
Product Specification
348
IS 5365 : 1991
Core drills, parallel shanks -- Specification (second revision )
PGD 32
2
Product Specification
349
IS 5366 : 1978
Specification for core drills, morse taper shanks (first revision)
PGD 32
1
Product Specification
350
IS 5444 : 1978
Specification for parallel hand reamers with parallel shanks (first revision)
PGD 32
1
Product Specification
351
IS 5445 : 1978
Specification for long fluted machine reamers with morse taper shanks (first revision)
PGD 32
1
Product Specification
352
IS 5568 : 1978
Dimensions for tenons and cross -- Slots with taper bore 1 : 30 (first revision)
PGD 32
1
Dimensions
353
IS 5693 : 1988
Specification for countersinks 90°, with parallel shanks and solid pilots (first revision)
PGD 32
1
Product Specification
354
IS 5698 : 1970
Specification for rotary form - relieved gear cutters for spur and helical gears
PGD 32
Product Specification
355
IS 5702 : 1970
Specification for flat thread rolling dies
PGD 32
Product Specification
356
IS 5703 : 1988
Specification for countersinks 90° with morse taper shanks and detachable pilots (first revision)
PGD 32
1
Product Specification
357
IS 5704 : 1988
Specification for counterbores with parallel shanks and solid pilots (first revision)
PGD 32
1
Product Specification
358
IS 5705 : 1988
Specification for detachable pilots for use with counterbores and countersink 90 degree (first revision)
PGD 32
1
Product Specification
359
IS 5710 : 1988
Specification for counterbores with morse taper shanks and detachable pilots (first revision)
PGD 32
1
Product Specification
360
IS 5881 : 1984
Specification for taper pin hand reamers (first revision)
PGD 32
1
Product Specification
361
IS 5882 : 1970
Specification for socket reamers with parallel shanks
PGD 32
Product Specification
362
IS 5907 : 1970
Specification for socket reamers with morse taper shanks
PGD 32
Product Specification
363
IS 5918 : 1984
Specification for taper pin, machine reamers with morse taper shanks (first revision)
PGD 32
1
Product Specification
364
IS 5926 : 1970
Specification for shell reamers
PGD 32
Product Specification
365
IS 5927 : 1981
Specification for reduction sleeves 7/24 tapers to morse tapers (first revision)
PGD 32
1
Product Specification
366
IS 5936 : 1981
Specification for arbors with morse taper shanks for shell tools (first revision)
PGD 32
1
Product Specification
367
IS 5989 : 1998
Hole mills -- Specification (second revision)
PGD 32
2
Product Specification
368
IS 6173 : Part 1 : 1992
Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision)
PGD 32
1
Dimensions
369
IS 6173 : Part 2 : 1992
Screwing taps -- Dimensions and tolerances of threaded portion: Part 2 For pipe screw threads G, Rp and Rc series
PGD 32
1
Dimensions
370
IS 6175 : Part 1 : 1992
Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision)
PGD 32
2
Product Specification
371
IS 6175 : Part 2 : 1992
Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision)
PGD 32
2
Product Specification
372
IS 6175 : Part 3 : 1992
Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision)
PGD 32
2
Product Specification
373
IS 6175 : Part 4 : 1991
Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification
PGD 32
Product Specification
374
IS 6175 : Part 5 : 1991
Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification
PGD 32
Product Specification
375
IS 6175 : Part 6 : 1992
Screwing taps: Part 6 Screwing taps for pipe threads parallel g series -- Specification
PGD 32
Product Specification
376
IS 6175 : Part 7 : 1992
Screwing taps: Part 7 Screwing taps for pipe threads parallel rc series -- Specification
PGD 32
Product Specification
377
IS 6175 : Part 8 : 1992
Screwing taps: Part 8 Screwing taps for pipe threads taper rc series -- Specification
PGD 32
Product Specification
378
IS 6255 : 2013
Inverse dovetail cutters and dovetail cutters with cylindrical shanks (third revision)
PGD 32
3
Product Specification
379
IS 6256 : 1995
Shell end single angle milling cutters -- Specification (first revision)
PGD 32
1
Product Specification
380
IS 6257 : 1982
Specification for shell end mills (first revision)
PGD 32
1
Product Specification
381
IS 6285 : 1971
Dimensions for interchangeability of milling cutters and milling arbors with key drive
PGD 32
Dimensions
382
IS 6308 : 1982
Specification for side and face milling cutters (first revision)
PGD 32
1
Product Specification
383
IS 6309 : 1982
Specification for cylindrical milling cutters (first revision)
PGD 32
1
Product Specification
384
IS 6310 : 1971
Dimensions for interchangeability of milling cutters and milling arbors with tenon drive
PGD 32
Dimensions
385
IS 888 : 1983
Specification for hollow - Ground razors, open type (Second Revision)
PGD 14
2
Product Specification
386
IS 6314 : 1982
Specification for single corner rounding milling cutters (first revision)
PGD 32
1
Product Specification
387
IS 6322 : 1982
Specification for concave milling cutters (first revision)
PGD 32
1
Product Specification
388
IS 6323 : 1982
Specification for convex milling cutters (first revision)
PGD 32
1
Product Specification
389
IS 6324 : 1971
Specification for single angle milling cutters
PGD 32
Product Specification
390
IS 6325 : 1971
Specification for double angle milling cutters
PGD 32
Product Specification
391
IS 13031 : 1990
Shaving systems - Twin blades cartridges - Specification
PGD 14
Product Specification
392
IS 6326 : 1996
Equal angle milling cutters -- Specification (first revision)
PGD 32
1
Product Specification
393
IS 6353 : 2014
End mills with parallel shank -- Specification (second revision)
PGD 32
2
Product Specification
394
IS 13777 : 1993
Shaving systems - Twin blade razor handles - Specification
PGD 14
Product Specification
395
IS 6355 : 1982
Specification for keyway milling cutters (first revision)
PGD 32
1
Product Specification
396
IS 13973 : 1994
Shaving systems - Disposable razors -- Specification
PGD 14
Product Specification
397
IS 989 : 1982
Specification for scissors for general purposes (Second Revision)
PGD 14
2
Product Specification
398
IS 6550 : 1992
Thread milling cutter with parallel shank -- Specification (first revision)
PGD 32
1
Product Specification
399
IS 6551 : 1992
Thread milling cutters with morse taper shanks -- Specification (first revision)
PGD 32
1
Product Specification
400
IS 988 : 1959
General requirements for optical components
PGD 39
Others
401
IS 6681 : 1972
Dimensions for self-release 7/24 tapers for spindle noses for milling machines
PGD 32
Dimensions
402
IS 6682 : 1991
Morse taper extension sockets -- Specification (first revision)
PGD 32
1
Product Specification
403
IS 2917 : 1981
Specificationfor umbrella ribs (First Revision)
PGD 14
1
Product Specification
404
IS 6702 : 1991
Morse taper reduction sleeves specification (first revision)
PGD 32
1
Product Specification
405
IS 6708 : 1977
Specification for centre drills type A (first revision)
PGD 32
1
Product Specification
406
IS 6709 : 1977
Specification for center drills type B (first revision)
PGD 32
1
Product Specification
407
IS 6710 : 1977
Specification for centre drills type R (first revision)
PGD 32
1
Product Specification
408
IS 1399 : 1959
Glossary of terms used in optical technology
PGD 39
Terminology
409
IS 6776 : 1980
Specification for knurling wheels (first revision)
PGD 32
1
Product Specification
410
IS 7766 : 1975
Specification for twist drills for jig boring machines
PGD 32
Product Specification
411
IS 7772 : 1975
Specification for shell core drills
PGD 32
Product Specification
412
IS 7773 : 1975
Holding dimensions for broaching tools
PGD 32
Dimensions
413
IS 1480 : 1970
Specification metric scales for general purposes (First Revision)
PGD 22
1
Product Specification
414
IS 7778 : Part 1 : 2003
Small tools sampling inspection procedures: Part 1 Twist drills, countersink and counterbores (first revision)
PGD 32
1
Others
415
IS 7778 : Part 2 : 2003
Small tools sampling inspection procedures: Part 2 Reamers (first revision)
PGD 32
1
Others
416
IS 7778 : Part 3 : 2003
Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision)
PGD 32
1
Others
417
IS 1481 : 1970
Specification for metric steel scales for engineers (First Revision)
PGD 22
1
Product Specification
418
IS 7778 : Part 4 : 2003
Small tools sampling inspection procedures: Part 4 Screwing taps, dies and knurling tools (first revision)
PGD 32
1
Others
419
IS 4798 : 1968
Specification for safety pins
PGD 14
Product Specification
420
IS 7778 : Part 5 : 2003
Small tools sampling inspection procedures: Part 5 Milling cutters (first revision)
PGD 32
1
Others
421
IS 7778 : Part 6 : 2003
Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision)
PGD 32
1
Others
422
IS 5348 : 1981
Specification for staples (First Revision)
PGD 14
1
Product Specification
423
IS 7778 : Part 7 : 2003
Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision)
PGD 32
1
Others
424
IS 7778 : Part 8 : 2003
Small tools sampling inspection procedures: Part 8 Saws (first revision)
PGD 32
1
Others
425
IS 5653 : 1988
Specification for pins, paper, straight (First Revision)
PGD 14
1
Product Specification
426
IS 7778 : Part 9 : 2003
Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision)
PGD 32
1
Others
427
IS 7778 : Part 10 : 2003
Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision)
PGD 32
1
Others
428
IS 7778 : Part 11 : 2003
Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision)
PGD 32
1
Others
429
IS 5650 : 1988
Specification for clips, paper (First Revision)
PGD 14
1
Product Specification
430
IS 1492 : 1970
Specification for metric surveying chains (First Revision)
PGD 22
1
Product Specification
431
IS 7371 : 1982
Specification for stainless steel, safety razor blades (Second Revision)
PGD 14
2
Product Specification
432
IS 6421 : 1972
Specification for perforators, paper, double hole
PGD 14
Product Specification
433
IS 4066 : 1967
Specification for metal hooks, clips and eyes
PGD 14
Product Specification
434
IS 5041 : 1978
Specification for footwear and stationery eyelets (First Revision)
PGD 14
1
Product Specification
435
IS 6422 : 1972
Specification for perforator, ,paper, single hole (Docket Punch)
PGD 14
Product Specification
436
IS 1632 : 1993
Optical instruments - Bubbles - Specification (First Revision)
PGD 39
1
Product Specification
437
IS 7822 : 2005
Twist drills -- Extra-long morse taper shank -- Specification (second revision)
PGD 32
2
Product Specification
438
IS 7823 : 2005
Twist drills -- Extra-long parallel shank -- Specification (second revision)
PGD 32
2
Product Specification
439
IS 8305 : 1976
Specification for twist drills, morse taper shank, long series
PGD 32
Product Specification
440
IS 8306 : 1976
Specification for carbide tipped twist drills, morse taper shank
PGD 32
Product Specification
441
IS 8307 : 1976
Specification for carbide tipped, twist drills, parallel shank
PGD 32
Product Specification
442
IS 8405 : 2005
Thread rolling cylindrical dies -- Specification (first revision)
PGD 32
Product Specification
443
IS 8616 : 1993
Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision)
PGD 32
1
Product Specification
444
IS 8618 : 1977
Specification for spacing collars for milling arbors
PGD 32
Product Specification
445
IS 8619 : 1977
Specification for bearing collars for milling arbors
PGD 32
Product Specification
446
IS 8620 : 1993
Clamping nuts for milling arbors specification (first revision)
PGD 32
1
Product Specification
447
IS 8621 : 1977
Specification for retaining screw for milling arbors
PGD 32
Product Specification
448
IS 8692 : Part 1 : 2004
Cylindrical shanks for milling cutters: Part 1 Dimensional characteristics of plain cylindrical shanks (first revision)
PGD 32
1
Dimensions
449
IS 8692 Part 2 : 2013
Cylindrical shanks for milling cutters: Part 2 Dimensional characteristics of flatted cylindrical shanks(first revision)
PGD 32
2
Dimensions
450
IS 8692 : Part 3 : 2007
Cylindrical shanks for milling cutters: Part 3 Dimensional characteristics of threaded shanks
PGD 32
Dimensions
451
IS 8732 : 2003
Single -- Start solid (Monobloc) gear nobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions (first revision)
PGD 32
1
Dimensions
452
IS 8842 : 1978
Specification for high speed steel butt - Welded single point planing tools
PGD 32
Product Specification
453
IS 8918 : 1978
Dimensions for spindle noses for adjustable adaptors
PGD 32
Dimensions
454
IS 8919 : 2007
Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi spindle heads (first revision)
PGD 32
1
Others
455
IS 9323 : 1991
Carbide tipped end mills with parallel shanks -- specification (first revision)
PGD 32
1
Product Specification
456
IS 9324 : 1991
Carbide tipped end mlls with morse taper shanks -- Specification (first revision)
PGD 32
1
Product Specification
457
IS 9325 : 1996
Carbide tipped slot drills with parallel shanks -- Specification (first Revision)
PGD 32
1
Product Specification
458
IS 9326 : 1996
Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision)
PGD 32
1
Product Specification
459
IS 9771 : 1981
Specification for carbide tipped core drills with morse taper shanks
PGD 32
Product Specification
460
IS 9775 : 2000
Carbide flats, squares and rounds -- Dimensions (first revision)
PGD 32
1
Dimensions
461
IS 9897 : 2013
Indexable inserts for cutting tools -- Designation (third revision)
PGD 32
3
Others
462
IS 10140 : 1982
Specification for bandsaw blades for woodworking
PGD 32
Product Specification
463
IS 10255 : 1982
Specification for tapered die-sinking cutters with parallel shanks
PGD 32
Product Specification
464
IS 10293 : 1982
Dimensions for optional recess on morse taper shanks for tools
PGD 32
Dimensions
465
IS 10412 : 1983
System of designation and marking of single point cutting tools with carbide tips
PGD 32
Others
466
IS 10465 : 1983
Specification for chain wheel rotary tooth form milling cutter
PGD 32
Product Specification
467
IS 10514 : 1983
Specification for split taper socket for tools with parallel shank and driving tenon
PGD 32
Product Specification
468
IS 10571 : 1983
Specification for split taper sockets for tools with parallel shank, driving square and driving tenon
PGD 32
Product Specification
469
IS 10591 : 1983
Specification for segmental saws for cold sawing
PGD 32
Product Specification
470
IS 10608 : 1998
Spline hobs -- Straight sided specification (first revision)
PGD 32
1
Product Specification
471
IS 10851 : 1984
Specification for taper pin machine reamers with parallel shanks
PGD 32
Product Specification
472
IS 10884 : 1984
Specification for carbide tipped chucking reamers with parallel shanks
PGD 32
Product Specification
473
IS 10885 : 1984
Specification for carbide tipped chucking reamers with morse taper shanks with short cutting edge
PGD 32
Product Specification
474
IS 10915 : 1984
Terms, definitions and types of twist drills
PGD 32
Terminology
475
IS 10952 : 1984
Recommendations for drills for use prior to tapping screw threads
PGD 32
Others
476
IS 11002 : 1984
Specification for machine jig reamers morse taper shank
PGD 32
Product Specification
477
IS 11127 : 1984
Specification for holders for knurling wheels
PGD 32
Product Specification
478
IS 11143 : 1984
Specification for ground high speed steel tool bits
PGD 32
Product Specification
479
IS 11351 : 2005
Stub self-holding tapers -- Dimensions (first revision)
PGD 32
1
Dimensions
480
IS 11441 : 1985
Dimensions for ground carbide rounds
PGD 32
Dimensions
481
IS 11522 : Part 1 : 1986
Recommendations for basic quantities in cutting and grinding: Part 1 Geometry of the active part of cutting tools, general terms, reference systems, tool and working angles and chip breakers
PGD 32
Others
482
IS 11523 : 1998
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (first revision)
PGD 32
1
Dimensions
483
IS 11677 : 2004
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions (first revision)
PGD 32
1
Others
484
IS 11741 : 1986
Specification for circular saws for wood working
PGD 32
Product Specification
485
IS 11829 : 1986
Specification for miniature hand hacksaw blades
PGD 32
Product Specification
486
IS 11835 : Part 1 : 2005
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 1 Dimensions of the driving system of tool shanks (first revision)
PGD 32
Dimensions
487
IS 11835 : Part 2 : 2004
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 2 Connecting dimensions of chucks and designation (first revision)
PGD 32
1
Dimensions
488
IS 11934 : 1987
Specification for carbide tipped shell reamers
PGD 32
Product Specification
489
IS 11935 : 1987
Specification for carbide tipped chucking reamers with morse taper shank with long cutting edge
PGD 32
Product Specification
490
IS 11936 : 1987
Specification for carbide tipped long fluted machine reamer with morse taper shank
PGD 32
Product Specification
491
IS 11937 : 1987
Specification for carbide tipped machine jig reamer with morse taper shank
PGD 32
Product Specification
492
IS 11938 : 1987
Specification for tool adaptors for numerically controlled machine tools (Tool rotating type)
PGD 32
Product Specification
493
IS 11943 : Part 2 : 1987
Specification for hard metal burrs: Part 2 Cylindrical burrs (Type A)
PGD 32
Product Specification
494
IS 11943 : Part 3 : 1987
Specification for hard metal burrs: Part 3 Cylindrical round -- (Ball - ) nose burrs (Type C)
PGD 32
Product Specification
495
IS 11943 : Part 4 : 1987
Specification for hard metal burrs: Part 4 Spherical burrs (Type D)
PGD 32
Product Specification
496
IS 11943 : Part 5 : 1987
Specification for hard metal burrs: Part 5 Oval burrs (Type E)
PGD 32
Product Specification
497
IS 11943 : Part 6 : 1987
Specification for hard metal burrs: Part 6 Arch round - (Ball - ) nose burrs (Type F)
PGD 32
Product Specification
498
IS 11943 : Part 7 : 1987
Specification for hard metal burrs: Part 7 Arch pointed nose burrs (Type G)
PGD 32
Product Specification
499
IS 11943 : Part 8 : 1987
Specification for hard metal burrs: Part 8 Flame burrs (Type H)
PGD 32
Product Specification
500
IS 11943 : Part 9 : 1987
Specification for hard metal burrs: Part 9 60 and 90 cone burrs (Type J and K)
PGD 32
Product Specification
501
IS 11943 : Part 10 : 1987
Specification for hard metal burrs: Part 10 Conical round -- (Ball) nose burrs (Type L)
PGD 32
Product Specification
502
IS 11943 : Part 11 : 1987
Specification for hard metal burrs: Part 11 Conical pointed -- Nose burrs (Type M)
PGD 32
Product Specification
503
IS 11943 : Part 12 : 1987
Specification for hard metal burrs: Part 12 Inverted cone burrs (Type N)
PGD 32
Product Specification
504
IS 11949 : 1987
Specification for turret sockets
PGD 32
Product Specification
505
IS 11950 : 1987
Specification for tool adaptors for numerically controlled machine tools (Tool stationary type)
PGD 32
Product Specification
506
IS 12319 : 1988
Circular screwing dies -- General table of dimensions
PGD 32
Dimensions
507
IS 12321 : 1988
Specification for circular screwing dies for ISO metric threads
PGD 32
Product Specification
508
IS 12322 : 1988
Specification for circular screwing dies for taper pipe threads, R - Series
PGD 32
Product Specification
509
IS 12324 : 1988
Specification for hexagonal die nuts
PGD 32
Product Specification
510
IS 12325 : 1988
Specification for circular screwing dies for ISO metric conduit pipe threads
PGD 32
Product Specification
511
IS 12354 : 2002
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (first revision)
PGD 32
1
Dimensions
512
IS 12536 : 1989
Small tools -- Disc type gear shaper cutters -- Specification
PGD 32
Product Specification
513
IS 12537 : 1989
Small tools -- Shank type gear shaper cutter -- Specification
PGD 32
Product Specification
514
IS 12538 : 1989
Small tools -- Shank type gear shaper cutter -- Specification
PGD 32
Product Specification
515
IS 12687 : 1989
Small tools -- Subland twist drills with morse taper shank for holes prior to tapping screw threads -- Specification
PGD 32
Product Specification
516
IS 12688 : 1989
Small tools -- Subland twist drills with parallel morse taper shank for clearance holes and countersinks head screws -- Specification
PGD 32
Product Specification
517
IS 12689 : 1989
Small tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification
PGD 32
Product Specification
518
IS 12690 : 1989
Small Tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification
PGD 32
Product Specification
519
IS 12692 : 1989
Small tools -- Subland twist drills with parallel shanks for clearance holes and countersinks for countersunk head screws -- Specification
PGD 32
Product Specification
520
IS 12716 : 2002
End mills with indexable specification (first revision)
PGD 32
1
Product Specification
521
IS 12728 : 1989
Carbide tips for dead centres -- Specification
PGD 32
Product Specification
522
IS 13167 : 1991
Side and face milling cutters with indexable inserts -- Specification
PGD 32
Product Specification
523
IS 13303 : 1992
Countersinks 60-degree, 90-degree and 120-degree with morse taper shank -- Specification
PGD 32
Product Specification
524
IS 13304 : 1992
Countersinks 60°,90° and 120° with parallel shank -- Specification
PGD 32
Product Specification
525
IS 13741 : Part 2 : 1993
Carbide tips: Part 2 Carbide tips for single point tools for light cutting operations -- Specification
PGD 32
Product Specification
526
IS 13741 : Part 3 : 1993
Carbide tips: Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification
PGD 32
Product Specification
527
IS 13741 : Part 4 : 1993
Carbide tips: Part 4 Carbide tips for multi point tools -- Specification
PGD 32
Product Specification
528
IS 13741 : Part 5 : 1993
Carbide tips: Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification
PGD 32
Product Specification
529
IS 13741 : Part 6 : 1993
Carbide tips: Part 6 Carbide tips for single point threading tools -- Specification
PGD 32
Product Specification
530
IS 13741 : Part 7 : 1993
Carbide tips: Part 7 Carbide tips for single point round nose turning tools -- Speciification
PGD 32
Product Specification
531
IS 13742 : Part 1 : 1993
Carbide tipped single point tools ISO series: Part 1 Straight turning tool (ISO 1 ) -- Specification
PGD 32
Product Specification
532
IS 13742 : Part 2 : 1993
Carbide tipped single point tools -- ISO series: Part 2 Cranked turning and facing tool (ISO 2) -- Specification
PGD 32
Product Specification
533
IS 13742 : Part 3 : 1993
Carbide tipped single point tools -- ISO series: Part 3 Cranked finishing tool (ISO 3) -- Specification
PGD 32
Product Specification
534
IS 13742 : Part 4 : 1993
Carbide tipped single point tools -- ISO series: Part 4 Broad turning tool (ISO 4) -- Specification
PGD 32
Product Specification
535
IS 13742 : Part 5 : 1993
Carbide tips: Part 5 Carbide tips twist drills with point angle 115 degree -- Specification
PGD 32
Product Specification
536
IS 13742 : Part 6 : 1993
Carbide tipped single point tool ISO series: Part 6 Cranked turning tool (ISO 6) -- Specification
PGD 32
Product Specification
537
IS 13742 : Part 7 : 1993
Carbide tipped single point tools ISO series: Part 7 Parting off tool (ISO 7) -- Specification
PGD 32
Product Specification
538
IS 13742 : Part 8 : 1993
Carbide tipped single point tools -- ISO series: Part 8 boring tool (ISO 8) -- Specification
PGD 32
Product Specification
539
IS 13742 : Part 9 : 1993
Carbide tipped single point tools -- ISO series: Part 9 Boring and facing tool (ISO 9) -- Specification
PGD 32
Product Specification
540
IS 13743 : Part 1 to 10 : 1997
Carbide tipped single point tools -- Ind series -- Specification
PGD 32
Product Specification
541
IS 13744 : Part 1 to 8 : 1995
Carbide tipped single point planing tools -- specification
PGD 32
Product Specification
542
IS 13776 : 1993
Machine tools morse taper shanks -- Cotter slots taper keys
PGD 32
Product Specification
543
IS 14532 : 1998
Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions
PGD 32
Dimensions
544
IS 14585 : 1998
Spline hobs -- Involute sided -- Specification
PGD 32
Product Specification
545
IS 14586 : 1998
Serration hobs -- Straight sided -- Specification
PGD 32
Product Specification
546
IS 14775 : 2000
Spot drills -- Dimensions
PGD 32
Dimensions
547
IS 14865 : 2001
Boring bars for indexable inserts -- Dimensions
PGD 32
Dimensions
548
IS 14867 : 2000
Cartridges, type A, for indexable inserts -- Dimensions
PGD 32
Dimensions
549
IS 15067 : 2001
End mills with brazed helical hard metal tips -- Dimensions
PGD 32
Dimensions
550
IS 15075 : 2001
Rotary and rotary impact masonry drill bits with hard metal tips -- Dimensions
PGD 32
Dimensions
551
IS 15091 : Part 1 : 2002
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 1 Dimensions of inserts without fixing hole
PGD 32
Dimensions
552
IS 15091 : Part 2 : 2004
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 2 dimensions of inserts with cylindrical fixing hole
PGD 32
Dimensions
553
IS 15092 : 2002
Single point cutting tools -- Corner radii
PGD 32
Dimensions
554
IS 15094 : 2002
Classification and designation of approximate chip control zones for indexable inserts with chip breakers
PGD 32
Others
555
IS 15144 : 2002
Indexable hardmetal (Carbide) inserts with rounded corners with partly cylindrical fixing hole -- Dimensions of inserts with 7° normal clearance for light alloy and plastic components turning
PGD 32
Dimensions
556
IS 15762 : 2007
Machine tools -- Positive drive of morse tapers
PGD 32
Dimensions
557
IS 15777 : 2008
Selection of hacksaw tooth for metal cutting -- Recommendations
PGD 32
Others
558
IS 16060 : 2013
Solid carbide parallel shank twist drills stub series -- Specification
PGD 32
Product Specification
559
IS 16136 : 2013
Solid carbide end mills with continuous parallel shank -- Specification
PGD 32
Product Specification
560
IS/ISO 7388 : Part 1 : 2007
Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF
PGD 32
Dimensions
561
IS/ISO 7388 : Part 2 : 2007
Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF
PGD 32
Dimensions
562
IS/ISO 7388 : Part 3 : 2007
Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
PGD 32
Product Specification
563
IS/ISO 6462 : 2011
Face milling cutters with indexable inserts -- Dimensions
PGD 32
1
Dimensions
564
IS 207 : 1964
Specification for gate and shutter hooks and eyes (Revised)
PGD 37
1
Product Specification
565
IS 451 : 1999
Technical supply conditions for wood screws (Third Revision)
PGD 37
3
Others
566
IS 530 : 1976
Specification for solid - Woven impregnated hair belting for power transmission (Second Revision)
PGD 40
2
Product Specification
567
IS 549 : 2005
Split pins - Specification (Third Revision)
PGD 37
2
Product Specification
568
IS 16901 : 2022
Jewellery and precious metals Determination of high purity gold platinum and palladium - Difference method using ICP-OES
MTD 10
1
Methods of tests
569
IS 7543 : 1975
Specification for planimeters
PGD 22
Product Specification
570
IS 9440 : 1979
Specification for laboratory balances
PGD 22
Product Specification
571
IS 9865 : 1981
Specification for laboratory weights
PGD 22
Product Specification
572
IS/ISO 7507 : Part 5 : 2000
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 5 External Electro-Optical Distance-Ranging Method
PGD 26
Methods of tests
573
IS/ISO 7507 : Part 4 : 2010
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 4 Internal Electro-Optical Distance-Ranging Method
PGD 26
Methods of tests
574
IS/ISO/IEC 17000 : 2020
Conformity assessment - Vocabulary and general principles ( First Revision )
MSD 14
1
Others
575
IS/ISO/IEC 17029 : 2019
Conformity assessment - General Principles and Requirements for Validation and Verification Bodies
MSD 14
Others
576
IS 11596 : 1986
Specification for grading of uncut Indian Bimli
TXD 3
Others
577
IS 16372 : 2015
Textiles - Jute bags for packing up to 30 kg foodgrains - Specification
TXD 3
Product Specification
578
IS 710 : 2024
MARINE PLYWOOD - SPECIFICATION (Third Revision)
CED 20
3
Product Specification
579
IS 4990 : 2024
PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)
CED 20
4
Product Specification
580
IS 9007 : 2023
Zircon Sand for Use in Foundries- Specification (First Revision)
MTD 14
1
Product Specification
581
IS 11951 : 2024
PUMPSET FOR DIRECT EVAPORATIVE AIR COOLER — SPECIFICATION (Second Revision)
MED 3
3
Product Specification
582
IS 13713 : 2021
Plastic chairs for general office purposes-
CED 35
1
Product Specification
583
IS/ISO 8066 : Part 2 : 2001
Rubber and Plastics Hoses and Hose Assemblies for Automotive Air Conditioning Specification Part 2 Refrigerant 134a Adoption of ISO 8066-2:2001
MED 3
Product Specification
584
IS/ISO/IEC GUIDE 46 : 2017
Comparative Testing Of Consumer Products And Related Services - General Principles
MSD 15
1
Code of Practice
585
IS/ISO 55000 : 2014
Asset management - Overview, principles and terminology
MSD 12
Terminology
586
IS 2009 : 1975
Method for calibration of horizontal and tilted oil storage tanks (First Revimn)
PGD 26
1
Methods of tests
587
IS 2827 : 1976
Methods for calibration of pressurized storage tanks (First Revision)
PGD 26
1
Methods of tests
588
IS 2808 : 1964
Method for computation of capacity tables for pressurized storage tanks
PGD 26
Methods of tests
589
IS 2166 : 1963
Method for computation of capavity tables for horizontal and tilted oil storage tanks
PGD 26
Methods of tests
590
IS 16186 : 2014
Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification
TXD 3
Product Specification
591
IS 2919 : 1979
Specification for umbrella fittings (First Revision)
PGD 14
1
Product Specification
592
IS 3743 : 1966
Specification for hair clippers (Hand - Operated)
PGD 14
Product Specification
593
IS 4084 : 1978
Specification for eyelets and washers (SAIL) (First Revision)
PGD 14
1
Product Specification
594
IS 4108 : 1984
Specification for snap fasteners for dresses (First Revision)
PGD 14
1
Product Specification
595
IS 4274 : 1981
Specification for buckles (First Revision)
PGD 14
1
Product Specification
596
IS 4741 : 1968
Snap fasteners (Four Pieces)
PGD 14
Product Specification
597
IS 5048 : 1969
Specification for equipment fasteners (Web Equipment Pattern)
PGD 14
Product Specification
598
IS 2920 : 1981
Specification for umbrellas (First Revision)
PGD 14
1
Product Specification
599
IS 7370 : 1974
Specification for razors, safety
PGD 14
Product Specification
600
IS 7671 : 1975
Specification for fastener, file, flexible - Prong type
PGD 14
Product Specification
601
IS 6021 : 1978
Specification for web - Equipment and 66 mm eyelets, rim painted with or without washers (First Revision)
PGD 14
1
Product Specification
602
IS 6321 : 1971
Specification for needles, hand sewing
PGD 14
Product Specification
603
IS 7672 : 1975
Specification for fastener, file, loose - Leaf, ring type
PGD 14
Product Specification
604
IS 8156 : 2014
Fastners for consumer goods - Synthetic hook and loop tape - Specification (Third Revision)
TXD 39
3
Product Specification
605
IS 8227 : Part 1 : 1988
Specification for fasteners, arch and clip for files: Part 1 arch fasteners (First Revision)
PGD 14
1
Product Specification
606
IS 8227 : Part 2 : 1988
Specification for fasteners, arch and clip for files: Part 2 clip fasteners (First Revision)
PGD 14
1
Product Specification
607
IS 8231 : 1976
Specification for clips, paper, spring type
PGD 14
Product Specification
608
IS 8247 : 1976
Specification for fastener, paper, prong type, with washer
PGD 14
Product Specification
609
IS 8738 : 1978
Specification for parachute buckles, D - Shaped
PGD 14
Product Specification
610
IS 8739 : 1978
Specification for adaptor, adjustable, buckle waist
PGD 14
Product Specification
611
IS 8740 : 1978
Specification for buckles, pack, outer, ptrm
PGD 14
Product Specification
612
IS 8741 : 1978
Specification for connecting lug, quick release, adjustable, ptrm
PGD 14
Product Specification
613
IS 8742 : 1978
Specification for adaptor, main, ptrm
PGD 14
Product Specification
614
IS 9547 : 1980
Specification for snap hook, with safety device (Ptr - R)
PGD 14
Product Specification
615
IS 9548 : 1980
Specification for snap hook (Static Line)
PGD 14
Product Specification
616
IS 9719 : 1981
Specification for button, press, lift the dot, cloth to metal
PGD 14
Product Specification
617
IS 9720 : 1981
Specification for button, press, lift the dot, cloth to wood
PGD 14
Product Specification
618
IS 9748 : 1981
Specification for metallic slide fasteners (For Aviation Purposes)
PGD 14
Product Specification
619
IS 10675 : 1983
Specification for umbrellas, folding - Manual
PGD 14
Product Specification
620
IS 10844 : 1984
Glossary of terms relating to slide fasteners
PGD 14
Product Specification
621
IS 14181 : Part 1 : 2002
Synthetic (Plastic) slide fasteners - Special purpose: Part 1 specification, selection and ordering guideline of the product (First Revision)
PGD 14
1
Product Specification
622
IS 14181 : Part 2 : 2002
Synthetic (Plastic) slide fasteners - Special purpose: Part 2 test and measurement methods
PGD 14
Product Specification
623
IS 14181 : Part 3 : 2002
Synthetic (Plastic) slide fasteners - Special purpose: Part 3 test report formats
PGD 14
Product Specification
624
IS 14232 : 1995
Shaving systems - Cases for barbers tools - Specification
PGD 14
Product Specification
625
IS/ISO 7507 : Part 1 : 2003
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks: Part 1 strapping method
PGD 26
Methods of tests
626
IS 16491 : Part 1 : 2016
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics
PGD 25
Code of Practice
627
IS 16491 : Part 2 : 2016
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics
PGD 25
Code of Practice
628
IS 16294 : Part 2 : 2016
Geometrical product specifications (GPS) - Flatness: Part 2 specification operators
PGD 25
Code of Practice
629
IS/ISO 2067 : 2019
Granulated cork broken cork and crushed cork Sampling for the determination of moisture content
MED 30
1
Methods of tests
630
IS 16602 : Part 1 : 2018
Information and documentation - RFID in libraries: Part 1 data elements and general guidelines for implementation
MSD 5
Others
631
IS 1391 : Part 2 : 2023
Room Air Conditioners Specification Part 2 Split Air Conditioners Fourth Revision
MED 3
4
Product Specification
632
IS 16753 : Part 5 : 2024
High-Efficiency Filters and Filter Media for Removing Particles in Air Part 5 Test Method for Filter Elements (First Revision)
MED 3
1
Methods of tests
633
IS 7872 : 2020
Deep Freezers - Specification ( Second Revision )
MED 3
2
Product Specification
634
IS 11329 : 2018
Finned type heat exchanger for room air conditioner (First Revision)
MED 3
1
Product Specification
635
IS 15963 : Part 5 : 2018
Graphic Technology – Process Control for the Production of Half-Tone Colour Separations, Proofs and Production Prints Part 5 Screen Printing (First Revision)
MSD 6
1
Code of Practice
636
IS 1275 : 2018
Information and documentation - Guidelines for the content, organization and presentation of indexes (Second Revision)
MSD 5
2
Others
637
IS 16657 : 2018
Information and documentation - Statistics and quality issues for web archiving
MSD 5
Others
638
IS 1610 : 2018
Household sewing machines - General requirements (Fourth Revision)
MED 29
4
Product Specification
639
IS 15995 : 2018
Information and documentation - MarcXchange (First Revision)
MSD 5
1
Others
640
IS 9142 : Part 1 : 2018
Artificial Lightweight Aggregate for Concrete - Specification: Part 1 For Concrete Masonry Blocks and for applications other than for Structural Concrete (First Revision)
CED 2
Product Specification
641
IS 9142 : Part 2 : 2018
Artificial Lightweight Aggregate for Concrete - Specification: Part 2 Sintered Fly ash Coarse Aggregate (First Revision)
CED 2
Product Specification
642
IS 16993 : 2018
Microfine Ordinary Portland Cement - Specification
CED 2
Product Specification
643
IS 16715 : 2018
Ultrafine Ground Granulated Blast Furnace Slag - Specification
CED 2
Product Specification
644
IS 16714 : 2018
Ground Granulated Blast Furnace Slag for Use in Cement, Mortar and Concrete - Specification
CED 2
Product Specification
645
IS 12650 : 2018
Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)
TXD 3
3
Product Specification
646
IS 15994 : Part 3 : 2019
Information and documentation - Records management process - Metadata for records: Part 3 self - Assessment method
MSD 5
Others
647
IS/ISO/TR 17766 : 2005
Centrifugal pumps handling viscous liquids - Performance corrections
MED 20
Others
648
IS 17074 : 2023
Metallic powders Determination of flow rate by means of a calibrated funnel Gustavsson flowmeter
MTD 25
1
Methods of tests
649
IS/ISO 11650 : 1999
Performance of refrigerant recovery and/or recycling equipment
MED 3
Methods of tests
650
IS/ISO 13261 : Part 2 : 1998
Sound power rating of airConditioning and air - Source heat pump equipment: Part 2 non - Ducted indoor equipment
MED 3
Methods of tests
651
IS 16590 : 2023
Liquid Chilling Package Units - Specification (First Revision)
MED 3
1
Product Specification
652
IS 16672 : Part 2 : 2017
Refrigerated display cabinets: Part 2 classification, requirements and test conditions
MED 3
Product Specification
653
IS/ISO 2030 : 2018
Granulated cork Size analysis by mechanical sieving
MED 30
1
Methods of tests
654
IS/ISO 1997 : 2018
Granulated cork and cork powder Classification properties and packing
MED 30
1
Product Specification
655
IS 17141 : Part 4 : 2019
Petroleum and Liquid Petroleum Products — Measurement of Level and Temperature in Storage Tanks by Automatic Methods Part 4 Measurement of Temperature in Atmospheric Tanks
PGD 26
Methods of tests
656
IS 17278 : 2019
Refined Gold and Silver Bars for Good Delivery — Specification
MTD 10
Product Specification
657
IS 516 : Part 2 : Sec 1 : 2018
Hardened Concrete - Methods of Test: Part 2 Properties of Hardened Concrete other than Strength: Section 1 Density of Hardened Concrete and Depth of Water Penetration Under Pressure ( First Revision )
CED 2
Methods of tests
658
IS 516 : Part 5 : Sec 1 : 2018
Hardened Concrete - Methods of Test: Part 5 Non-destructive Testing of Concrete: Section 1 Ultrasonic Pulse Velocity Testing ( First Revision )
CED 2
Methods of tests
659
IS 16514 : Part 1 : 2018
Non-Automatic Weighing Instruments Part 1 Terminology and Definitions
PGD 26
Terminology
660
IS 16656 : 2017
Refrigerants - Designation and safety classification
MED 3
Safety Standard
661
IS/ISO 6070 : 2019
Auxiliary Tables for Vibration Generators — Methods of Describing Equipment Characteristics ( First Revision )
MED 28
Others
662
IS 14587 : 2023
Prelaminated Medium Density Fibre Board - Specification
CED 20
1
Product Specification
663
IS 15622 : 2017
Pressed Ceramic Tiles - Specification (First Revision)
CED 5
1
Product Specification
664
IS 17383 : 2020
Microbiology of Food, Animal Feed and Water - Preparation, Production, Storage and Performance Testing of Culture Media
FAD 31
Methods of tests
665
IS/ISO 8239 : 1987
Sewing Machine Needles - Fitting Dimensions - Tolerances and Combinations
MED 29
Dimensions
666
IS/ISO 10821 : 2005
Industrial Sewing Machines - Safety Requirements for Sewing Machines, Units and Systems
MED 29
Product Specification
667
IS/IEC 60335 : Part 2 : Sec 40 : 2018
Household and similar electrical appliances safety : Particular requirements for electrical heat pumps air-conditioners and dehumidifiers Adoption of IEC 60335-2-40
MED 3
Product Specification
668
IS/ISO/IEC/TS 17021 : Part 8 : 2019
Conformity assessment --Requirements for bodies providing audit and certification of management systems --Part 8: Competence requirements for auditing and certification of management systems for sustainable development in communities
MSD 14
Others
669
IS/ISO/TS 17033 : 2019
Ethical claims and supporting information Principles and requirements
MSD 14
Others
670
IS 17570 : Part 1 : 2021
Air Filters for general ventilation Part 1 Technical specifications requirements and classification system based upon particulate matter efficiency ePM Adoption of ISO 16890-1:2016
MED 3
Product Specification
671
IS 17570 : Part 2 : 2021
Air Filters for general ventilation Part 2 Measurement of fractional efficiency and air flow resistance Modified adoption of ISO 16890-2:2016
MED 3
Methods of tests
672
IS 17570 : Part 4 : 2021
Air Filters for general ventilation Part 4 Conditioning method to determine the minimum fractional test efficiency (adoption of ISO 16890-4:2016)
MED 3
Methods of tests
673
IS/ISO 29991 : 2020
Language-learning services Requirements
SSD 4
Service Specification
674
IS 17681 : 2022
Methods for testing tar and bituminous materials - Ageing of bitumen (RTFO and PAV tests) (First Revision)
MED 3
Product Specification
675
IS 60335 : Part 2 : Sec 34 : 2021
Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors Adoption of IEC 60335-2-34: 2021
MED 3
Product Specification