1
IS 10238 : 2001 Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)
1
Product Specification
2
IS 10248 : PART 1 : 2011 Parallel pins with internal thread: Part 1 unhardened steel and austenitic stainless steel (First Revision)
1
Product Specification
3
IS 10248 : PART 2 : 2011 Parallel pins with internal thread: Part 2 hardened steel and martensitic stainless steel (First Revision)
1
Product Specification
4
IS 1120 : 1975 Specification for coach screws (First Revision)
1
Product Specification
5
IS 12427 : 2001 Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision)
1
Product Specification
6
IS 12952 : 2005 Grooved pins - Full - Length parallel grooved, with chamfer (First Revision)
1
Product Specification
7
IS 1363 : Part 1 : 2023 Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)
6
------
8
IS 1363 : Part 1 : 2019 Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision )
5
Product Specification
9
IS 1363 : Part 1 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grade `C (Fourth Revision)
4
Product Specification
10
IS 1363 : Part 2 : 2023 Hexagon head bolts, screws and nuts of product grade C Part 2 Hexagon head screws (Size range M5 to M64) (sixth revision)
6
------
11
IS 1363 : Part 3 : 2018 Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )
5
Product Specification
12
IS 1364 : Part 1 : 2023 Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)
6
------
13
IS 1364 : Part 1 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 1 : Hexagon Head Bolts (Size Range M 1.6 to M 64) (Fourth Revision)
4
Product Specification
14
IS 1364 : Part 1 : 2018 Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision)
5
Product Specification
15
IS 1364 : Part 2 : 2023 Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))
5
------
16
IS 1364 : Part 2 : 2018 Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision)
4
Product Specification
17
IS 1364 : Part 3 : 2018 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 )
5
Product Specification
18
IS 1364 : Part 4 : 2003 Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision)
4
Product Specification
19
IS 1364 : Part 5 : 2002 Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision)
4
Others
20
IS 1364 : Part 6 : 2018 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision )
1
Product Specification
21
IS 1365 : 2022 Slotted countersunk flat head screws Product grade A Fifth Revision of IS 1365
6
Others
22
IS 1366 : 2022 Slotted Cheese Head Screws � Product Grade A (Fourth Revision of IS 1366)
4
------
23
IS 1367 : Part 1 : 2014 Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision)
4
Others
24
IS 1367 : Part 2 : 2002 Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision)
3
Others
25
IS 1367 : Part 3 : 2017 Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)
5
Product Specification
26
IS 1367 : Part 5 : 2018 Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision)
4
Product Specification
27
IS 1367 : Part 6 : 2018 Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)
4
Product Specification
28
IS 1367 : Part 7 : 1980 Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision)
2
Product Specification
29
IS 1367 : Part 8 : 2020 Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision )
5
Product Specification
30
IS 1367 : Part 9 : Sec 1 : 1993 Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 1 bolts, screws and studs for general applications (Third Revision)
3
Others
31
IS 1367 : Part 9 : Sec 2 : 1993 Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 2 bolts, screws and studs for special applications (Third Revision)
3
Others
32
IS 1367 : Part 10 : 2002 Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision)
3
Others
33
IS 1367 : Part 11 : 2020 Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision )
4
Dimensions
34
IS 1367 : Part 12 : 1981 Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision)
2
Code of Practice
35
IS 1367 : Part 13 : 2020 Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )
3
Methods of tests
36
IS 1367 : Part 14 : Sec 1 : 2023 Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless Steel Fasteners Section 1 Bolts screws and studs with specified grades and property classes (Fifth Revision of IS 1367(Part 14 Sec 1))
5
------
37
IS 1367 : Part 14 : Sec 2 : 2023 Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts with specified grades and property classes
5
------
38
IS 1367 : Part 14 : Sec 3 : 2018 Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision
4
Product Specification
39
IS 1367 : Part 16 : 2002 Technical supply conditions for threaded steel fasteners: Part 16 designation system for fasteners (Third Revision)
3
Others
40
IS 1367 : Part 17 : 2023 Technical Supply Conditions for Threaded Steel Fasteners Part 17 Inspections Sampling and Acceptance Procedure Fifth Revision of IS 1367 Part 17
5
------
41
IS 1367 : Part 18 : 1996 Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision)
3
Others
42
IS 1368 : 2018 Dimensions for ends of parts with external ISO metric threads (Fourth Revision)
4
Product Specification
43
IS 1369 : Part 1 : 1993 Fasteners - Thread run - Outs and under - cuts: Part 1 dimensions for screw thread run - Outs for external ISO metric threads (Third Revision)
3
Dimensions
44
IS 1369 : Part 2 : 1993 Fasteners - Thread run - Outs and undercuts: Part 2 dimensions for screw thread undercuts for external ISO metric threads (Third Revision ;
3
Dimensions
45
IS 1369 : Part 3 : 2021 Fasteners - Thread Run-Outs and Undercuts - Part 3 : Dimensions for Screw Thread Run-Outs and Undercuts for Internal Threads Blind Tapped Holes Third Revision
4
Code of Practice
46
IS 13722 : 2002 Hexagon regular nuts (Style 1) with metric fine pitch thread - Product grades A and B (Second Revision)
2
Product Specification
47
IS 13723 : 2018 Hexagon High Nuts (Style 2) With Metric Fine Pitch Thread - Product Grades A and B (Second Revision)
2
Product Specification
48
IS 13724 : 2018 Hexagon thin nuts chamfered (Style 0) with metric fine pitch thread - Product grades A and B (Second Revision)
2
Product Specification
49
IS 13725 : 2023 Hexagon Head Screws With Metric Fine Pitch Thread Product Grades A and B Third Revision of 13275
3
------
50
IS 13726 : 2023 Hexagon head bolts with metric fine pitch thread � Product grades A and B (third revision)
3
------
51
IS 14894 : 2023 Fasteners � Hexagon head bolts of product grade B � Reduced shank (shank diameter ? pitch diameter) � Specification
1
------
52
IS 14962 : Part 1 : 2018 ISO general purpose metric screw threads - Tolerances: Part 1 principles and basic data (First Revision)
1
Dimensions
53
IS 14962 : Part 3 : 2022 ISO general purpose metric screw threads � Tolerances � Part 3: Limit deviations for screw threads
1
------
54
IS 14962 : Part 4 : 2023 ISO General purpose metric screw threads - Tolerances Part 4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (First revision of IS 14962( Part 4 ) )
1
------
55
IS 15274 : 2021 Tolerances for fasteners Washers for bolts screws and nuts Product grades A C and F First Revision of IS 15274 ISO 4759-3 : 2016 ICS 2106030
1
Methods of tests
56
IS 15581 : 2018 Hexagon nuts with flange, style 2 - Coarse thread (First Revision)
1
Product Specification
57
IS 15582 : 2018 Hexagon Bolts with Flange - Small Series - Product Grade A with Driving Feature of Product Grade B ( First Revision)
1
Product Specification
58
IS 15628 : 2022 Slotted set screws with flat point - Specification First Revision of IS 15628 ICS 2106010
2
Code of Practice
59
IS 1821 : 1987 Dimensions for clearance holes for bolts and screws (Third Revision)
3
Others
60
IS 1862 : 1975 Specification for studs (Second Revision)
2
Others
61
IS 1929 : 1982 Specification for hot forged steel rivets for hot closing (12 To 36 Mm Diameter)
1
Product Specification
62
IS 2016 : 1967 Specification for plain washers (First Revision)
1
Product Specification
63
IS 207 : 1964 Specification for gate and shutter hooks and eyes (Revised)
1
Product Specification
64
IS 2102 : Part 1 : 1993 General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision)
3
Dimensions
65
IS 2155 : 1982 Specification for cold forged solid steel rivets for hot closing (6 To 16 Mm Diameter) (First Revision)
1
Product Specification
66
IS 2186 : 1985 ISO metric external screw threads for interference fit applications (First Revision)
1
Dimensions
67
IS 2232 : 1967 Specification for slotted and castle nuts (First Revision)
1
Product Specification
68
IS 2269 : 2006 Hexagon socket head cap screws (Fifth Revision)
5
Product Specification
69
IS 2393 : 2010 Parallel pins, of unhardened steel and austenitic stainless steel (Third Revision)
5
Others
70
IS 2473 : 1975 Dimensions for centre holes (First Revision)
1
Dimensions
71
IS 2540 : 2008 Dimensions for threaded centre holes (First Revision)
1
Dimensions
72
IS 2585 : 2006 Square head bolts, screws and square nuts of product grade C - Specification (Second Revision)
1
Product Specification
73
IS 2609 : 1972 Specification for coach bolts (First Revision)
1
Product Specification
74
IS 2636 : 1972 Specification for wing nuts (First Revision)
1
Product Specification
75
IS 2638 : 1974 Specification for flat split cotters (First Revision)
1
Product Specification
76
IS 2643 : 2005 Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision)
3
Dimensions
77
IS 2687 : 1991 Capnuts - Specification (Second Revision)
2
Product Specification
78
IS 2769 : 1969 Sizes for squares and square holes for general engineering purposes (First Revision
1
Dimensions
79
IS 2907 : 1998 Non - Ferrous rivets - Specification (First Revision)
1
Product Specification
80
IS 2998 : 1982 Specification for cold forged steel rivets for cold closing (1 To 16 mm Diameter) (First Revision)
1
Others
81
IS 3063 : 1994 Fasteners - Single coil rectangular section spring lock washers specification (Second Revision)
2
Product Specification
82
IS 3406 : Part 1 : 1986 Dimensions for countersinks and counterbores: Part 1 countersinks (Second Revision)
2
Dimensions
83
IS 3406 : Part 2 : 2014 Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision)
3
Dimensions
84
IS 3428 : 2009 Dimensions for relief grooves (Second Revision)
2
Dimensions
85
IS 3457 : 2009 Radii for rounding for general engineering purposes (Second Revision)
1
Dimensions
86
IS 3458 : 2018 Conical tapers and taper angles for general engineering purposes (Third Revision)
3
Product Specification
87
IS 3460 : 1991 Knurled nuts - Specification (Second Revision)
2
Product Specification
88
IS 3468 : 1991 Pipe nuts - Specification (Second Revision)
2
Product Specification
89
IS 3524 : Part 1 : 1982 Specification for threaded taper pins: Part 1 with internal threads (First Revision)
1
Product Specification
90
IS 3524 : Part 2 : 1982 Specification for threaded taper pins: Part 2 with external threads (First Revision)
1
Product Specification
91
IS 3640 : 1982 Specification for hexagon fit bolts (First Revision)
1
Product Specification
92
IS 3726 : 2003 Thumb screws - Specification (Second Revision)
2
Product Specification
93
IS 3757 : 1985 Specification for high strength structural bolts (Second Revision)
2
Product Specification
94
IS 4040 : 1998 Fasteners - Solid drilled tubular and semi - Tubular rivets - Specification (First Revision)
1
Product Specification
95
IS 4172 : 2005 General purpose bolts and screws - Metric series - Radii under the head (Second Revision)
1
Dimensions
96
SP 42 : 2008 Survey of screw threads (First Revision)
1
Code of Practice
97
IS 4206 : 2012 Dimensions for nominal lengths and thread lengths for bolts, screws and studs (Second Revision)
2
Dimensions
98
IS 4218 : Part 1 : 2001 ISO general purpose metric screw threads: Part 1 basic profile - second revision)
2
Dimensions
99
IS 4218 : Part 2 : 2001 ISO general purpose metric screw threads: Part 2 general plan (Second Revision)
2
Dimensions
100
IS 4218 : Part 3 : 1999 ISO general purpose metric screw threads: Part 3 basic dimensions (Second Revision)
2
Dimensions
101
IS 4218 : Part 4 : 2001 ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision)
2
Dimensions
102
IS 451 : 1999 Technical supply conditions for wood screws (Third Revision)
3
Others
103
IS 4695 : Part 1 : 2003 General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision)
2
Dimensions
104
IS 4695 : Part 2 : 2003 General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision)
2
Dimensions
105
IS 4696 : Part 1 : 2004 DIMENSIONS FOR METRIC BUTTRESS THREADS PART 1 THREAD PROFILES (Second Revision)
1
Dimensions
106
IS 4696 : Part 2 : 2004 DIMENSIONS FOR METRIC BUTTRESS THREADS PART 2 PITCH DIAMETER COMBINATIONS (Second Revision)
1
Dimensions
107
IS 4696 : Part 3 : 2004 Dimensions for metric buttress threads: Part 3 basic dimensions (Second Revision)
2
Dimensions
108
IS 4696 : Part 4 : 2005 Dimensions for metric buttress threads: Part 4 tolerancing system (Second Revision)
1
Dimensions
109
IS 4762 : 2002 FASTENERS — WORM DRIVE HOSE CLAMPS FOR GENERAL PURPOSES — SPECIFICATION ( Second Revision )
1
Others
110
IS 5371 : 1982 Specification for multi - Tooth lock washers (First Revision)
1
Product Specification
111
IS 5372 : 1975 Specification for taper washers for channels (ISMC) (First Revision)
1
Product Specification
112
IS 5374 : 1975 Specification for taper washers for I - Beams (Ismb) (First Revision)
1
Product Specification
113
IS 549 : 2005 Split pins - Specification (Third Revision)
2
Product Specification
114
IS 554 : 1999 Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision)
4
Dimensions
115
IS 5554 : 1991 Lock washers with lug - Specification (First Revision)
1
Product Specification
116
IS 5556 : 1991 Serratedlockwashers - Specification (First Revision)
1
Product Specification
117
IS 5624 : 2021 FOUNDATION BOLTS SPECIFICATION Second Revision
2
Methods of tests
118
IS 5957 : 2003 Screw threads for thread forming tapping screws dimensions (Second Revision)
2
Dimensions
119
IS 6094 : Part 1 : 2006 Hexagon socket set screws: Part 1 with flat point (Third Revision)
3
Others
120
IS 6094 : Part 4 : 2006 Hexagon socket set screws: Part 4 with cup point (Third Revision)
3
Others
121
IS 6101 : 2018 Slotted pan head screws - Product grade a (Third Revision)
3
Product Specification
122
IS 6623 : 2004 High Strength Structural Nuts
2
Product Specification
123
IS 6649 : 1985 Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)
1
Product Specification
124
IS 6688 : 2005 Taper pins, unhardened (Second Revision)
1
Others
125
IS 6689 : 2003 Parallel pins of hardened steel and martensitic stainless steel (Dowel Pins) (First Revision)
1
Others
126
IS 6735 : 1994 Fasteners - Spring lock wasixers for screws with cylindrical heads - Specification (First Revision)
1
Product Specification
127
IS 6755 : 1980 Specification for double coil helical spring washers (First Revision)
1
Product Specification
128
IS 6761 : 2023 Fasteners Hexagon Socket Countersunk Head Screws with Reduced Loadability Third Revision of IS 6761
3
------
129
IS 6862 : 2005 Clews pins without head (Second Revision)
2
Others
130
IS 6863 : 2005 Clevis pins with head (Second Revision)
2
Others
131
IS 7002 : 2018 Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision)
3
Product Specification
132
IS 7008 : Part 1 : 2021 ISO metric trapezoidal screw threads Part 1 Basic and design profile Third Revision IS 7008 Part 1 ISO 2901 : 2016 ICS 2106010
3
Methods of tests
133
IS 7008 : Part 2 : 2021 ISO metric trapezoidal screw threads Part 2 General plan Second Revision IS 7008 Part 2 ISO 2902 : 2016 ICS 2106010
2
Product Specification
134
IS 7008 : Part 3 : 2023 ISO METRIC TRAPEZOIDAL SCREW THREADS PART 3 BASIC DIMENSIONS (Second Revision of IS 7008(Part 3))
2
------
135
IS 7008 : Part 4 : 2021 ISO metric trapezoidal screw threads Part 4 Tolerances Third Revision IS 7008 Part 4 ISO 2903 : 2016 ICS 2106010
3
Product Specification
136
IS 7169 : 2018 Slotted raised countersunk (Oval) head tapping screws (Second Revision)
2
Product Specification
137
IS 7170 : 2018 Slotted countersunk (Flat) head tapping screws (Second Revision)
2
Product Specification
138
IS 7173 : 2018 Slotted pan head tapping screws (Second Revision)
2
Product Specification
139
IS 7178 : 2018 Heat - Treated steel tapping screws - Mechanical properties (Fourth Revision)
4
Product Specification
140
IS 723 : 1972 Specification for steel countersunk head wire nails (First Revision)
1
Product Specification
141
IS 723 : 2023 Steel Countersunk Head Wire Nails � Specification ( Second Revision )
2
------
142
IS 724 : 2023 Mild Steel and Brass Cup, Ruler and Square Hooks and Screw Eyes � Specification
2
------
143
IS 730 : 2021 Specification for Hook Bolts for Corrugated Sheet Roofing
3
Methods of tests
144
IS 7368 : 2005 Grooved pins - Full - Length taper grooved (Second Revision)
2
Others
145
IS 7383 : 2005 Grooved puns - One - Third - Length centre grooved (Second Revision)
2
Others
146
IS 7384 : 2005 Grooved pins - Full - Length parallel grooved, with pilot (Second Revision)
2
Others
147
IS 7385 : 2005 Grooved pins - Half - Length taper grooved (Second Revision)
2
Others
148
IS 7386 : 2005 Grooved pins - Half - Length reverse taper grooved (Second Revision)
2
Others
149
IS 7478 : 2011 Cross recesses for screws (Second Revision)
2
Others
150
IS 7483 : 2018 Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision)
3
Product Specification
151
IS 7485 : Part 1 : 2018 Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision)
3
Product Specification
152
IS 7485 : Part 2 : 2018 Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision)
3
Product Specification
153
IS 7486 : 2018 Raised countersunk head screws (Common Head Style) with type H or type Z cross recess - Product grade A (Third Revision)
3
Product Specification
154
IS 7615 : 2003 System of cone tolerance for conical workpiece from c = 1:3 to 1:500 and lengths from 6 to 630 mm (Second Revision)
2
Dimensions
155
IS 7790 : 1991 Domed cap nuts - Specification (First Revision)
1
Product Specification
156
IS 7795 : 2004 Hexagon nuts with collar - Specification (First Revision)
1
Product Specification
157
IS 7800 : 1990 Thread cutting tapping screwsscrew threads and ends - Dimensions (First Revision)
1
Dimensions
158
IS 8070 : 1991 Screws - Slotted capstan (Tommy bolts) - Specification (First Revision)
1
Product Specification
159
IS 8535 : 2020 Fasteners — Terminology ( Second Revision )
2
Terminology
160
IS 8536 : 2021 Fasteners - Bolts screws studs and nuts - Symbols and designation of dimensions First Revision IS 8536
2
Terminology
161
IS 8788 : 2002 Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision)
2
Dimensions
162
IS 8856 : 1991 Hexagon weld nuts - Specification (First Revision)
1
Product Specification
163
IS 8911 : 2018 Slotted raised countersunk head screws - Product grade A (Second Revision)
2
Product Specification
164
IS 919 : Part 2 : 2014 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision)
1
Dimensions
165
IS 9519 : 2005 Fasteners - Hexagon products - Width across flats (First Revision)
1
Product Specification
166
IS 9549 : Part 1 : 2014 Fasteners -- Bolts, screws and studs: Part 1 Split pin holes and wire holes (first revision)
1
Product Specification
167
IS 9549 : Part 2 : 2014 Fasteners - Bolts, screws and studs - Head slots for bolts (First Revision)
1
Product Specification
