Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Metrological instrument )
Total Standards : 367
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10216 : 1988/ISO 228-2 : 1987 (1 Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Verification by means of limit gauges (First Revision) | 0 | Jan, 2020 | Buy | |
| 2 | IS 10236 : Part 2 : 1982 |
Procedure for climatic and durability tests for optical instruments: Part 2 dry heat test | 0 | Mar, 2022 | Download | |
| 3 | IS 10236 : Part 3 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 3 cold test | 0 | Mar, 2022 | Download | |
| 4 | IS 10236 : Part 4 : 1982 |
Procedure for basic climatic and durability for optical instruments: Part 4 damp heat test | 0 | Mar, 2022 | Download | |
| 5 | IS 10236 : Part 5 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 5 damp heat (Cyclic) test | 0 | Mar, 2022 | Download | |
| 6 | IS 10236 : Part 6 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 6 salt mist test | 0 | Mar, 2022 | Download | |
| 7 | IS 10236 : Part 7 : 1983 |
Procedure for basic climatic and durability tests for optical instruments .: Part 7 mould growth test | 0 | Mar, 2022 | Download | |
| 8 | IS 10236 : Part 8 : 1983 |
Procedure for basic climatic and durability tests for optical instruments: Part 8 thermal shock (Rapid Change Of Temperature) test | 0 | Mar, 2022 | Download | |
| 9 | IS 10236 : Part 9 : 1983 |
Procedure for basic climatic and durability tests for. optical instruments: Part 9 low air pressure (Altitude) test | 0 | Mar, 2022 | Download | |
| 10 | IS 10236 : Part 10 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 10 bump test | 0 | Mar, 2022 | Download | |
| 11 | IS 10236 : Part 11 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 11 vibration test | 0 | Mar, 2022 | Download | |
| 12 | IS 10236 : Part 12 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 12 shock test | 0 | Mar, 2022 | Download | |
| 13 | IS 10236 : Part 13 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 13 dust test | 0 | Mar, 2022 | Download | |
| 14 | IS 10236 : Part 14 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 14 driving rain test | 0 | Mar, 2022 | Download | |
| 15 | IS 10236 : Part 15 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 15 drop test | 0 | Mar, 2019 | Download | |
| 16 | IS 10236 : Part 16 : 1988 |
Procedure for basic climatic and durability tests for optical instruments part 16 solar radiation test | 0 | Mar, 2019 | Download | |
| 17 | IS 10236 : Part 17 : 1988 |
Procedure for basic climatic and durability tests for optical instruments: Part 17 acceleration (Steady - State) test | 0 | Mar, 2019 | Download | |
| 18 | IS 10236 : Part 18 : 1988 |
Procedure for basic climatic and durability tests for optical instruments: Part 18 sealing test | 0 | Mar, 2019 | Download | |
| 19 | IS 10275 : 1982 |
Methods For Assessment of circularity Error From Polar Graphs Obtained By Using Stylus-Type Form-Measuring Instrument | 0 | Mar, 2022 | Download | |
| 20 | IS 1057 : 2004 (3 Revision) |
Commercial carat weights - Specification (Third Revision) | 0 | Apr, 2021 | Download | |
| 21 | IS 1058 : 1993 (2 Revision) |
Legal metrology - Commercial capacity measures - Specification (Second Revision) | 0 | Apr, 2024 | Download | |
| 22 | IS 10587 : 1983 |
Terminology for screw threads | 0 | Feb, 2021 | Download | |
| 23 | IS 1059 : 1994 (1 Revision) |
Legal metrology - Commercial length measures (Non - Flexible) - Specification (First Revision) | 0 | Apr, 2024 | Download | |
| 24 | IS 10679 : 1983 |
Specificati - On for photoelectric spectrophotometer (Single Beam Type) | 0 | Mar, 2019 | Download | |
| 25 | IS 10685 : 1983 |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200) | 0 | Feb, 2019 | Download | |
| 26 | IS 10695 : 1983 |
Specification for pocket stereoscope | 0 | Mar, 2019 | Download | |
| 27 | IS 10714 : Part 15 : 2019/ISO 128-71:2010 |
Technical Product Documentation (TPD) -- General principles of presentation: Part 15 Presentation of shipbuilding drawings | 0 | Aug, 2023 | Buy | |
| 28 | IS 10714 : Part 71 : 2019/ISO 128-15:2013 |
Technical product documentation (TPD) -- General principles of presentation: Part 71 Simplified representation for mechanical engineering drawings | 0 | Aug, 2023 | Buy | |
| 29 | IS 1076 : Part 1 : 1985/ISO 3 : 1973 (2 Revision) |
Preferred numbers: Part 1 series of preferred numbers (Second Revision) | 0 | Oct, 2021 | Buy | |
| 30 | IS 1076 : Part 2 : 1985/ISO 17 : 1973 (2 Revision) |
Preferred numbers: Part 2 guide to the use of preferred numbers and series of preferred numbers | 0 | Oct, 2021 | Buy | |
| 31 | IS 1076 : Part 3 : 1985/ISO 497 : 1973 (2 Revision) |
Preferred numbers: Part 3 guide to the choice of series of preferred numbers and of series containlng more rounded values of preferred numbers (Second Revision) | 0 | Oct, 2021 | Buy | |
| 32 | IS 10995 : 1984 |
Specification for tuning fork | 0 | Mar, 2021 | Download | |
| 33 | IS 11103 : 1984 |
Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm) | 0 | Jan, 2020 | Download | |
| 34 | IS 11152 : 1984 |
Specification for laboratory stands (Metallic) | 0 | Mar, 2021 | Download | |
| 35 | IS 11444 : 1985 |
Specification for grinding and polishing materials for optical components | 0 | Mar, 2022 | Download | |
| 36 | IS 1177 : 2022/ISO 16610-40 : 2015 (3 Revision) |
OIL OF VETIVER CULTIVATED AND KHUS SPECIFICATION | 0 | ---- | Buy | |
| 37 | IS/ISO/IEC 11770 : Part 7 : 2021/12123 |
Information security Key management Part 7: Cross-domain password-based authenticated key exchange | 0 | ---- | Buy | |
| 38 | IS 11961 : 1986 |
Specification for 4 - Metre levelling staff (Telescopic) | 0 | Mar, 2021 | Download | |
| 39 | IS 11999 : 2022/ISO 9186-3 : 2014 (2 Revision) |
METALLIC MATERIALS SHEET AND STRIP DETERMINATION OF PLASTIC STRAIN RATIO (Second Revision) | 0 | ---- | Buy | |
| 40 | IS 12186 : 1987 |
Tolerances for ISO - vietric trapezoidal screw threads for lead and feed screw assemblies | 0 | Dec, 2019 | Download | |
| 41 | IS 12257 : Part 1 : 1987 |
Specification for pneumatic length measurement comparators: Part 1 general information on principles and methods | 1 | Mar, 2022 | Download | |
| 42 | IS 12257 : Part 2 : 1992 |
Pneumatic measurement: Part 2 design features of instruments working in high pressure range | 0 | Mar, 2022 | Download | |
| 43 | IS 12257 : Part 3 : 1992 |
Pneumatic measurement: Part 3 parameters of instruments working on high pressure | 0 | Mar, 2022 | Download | |
| 44 | IS 12257 : Part 4 : 1992 |
Pneumatic measurement - Specification: Part 4 general information and examples of application | 0 | Mar, 2022 | Download | |
| 45 | IS 12257 : Part 5 : 1996 |
Pneumatic measurement: Part 5 glossary of terms and definition | 0 | Mar, 2022 | Download | |
| 46 | IS 12586 : 2021/ISO 128-2:2022 (1 Revision) |
Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity Specification | 0 | ---- | Buy | |
| 47 | IS 12713 : 1989 |
Optical instruments - Permissible cosmetic defects and inspection of optical components | 0 | Mar, 2019 | Download | |
| 48 | IS 12874 : 1989 |
Optical and mathematical instruments - Telescopic alidade - specification | 0 | Mar, 2019 | Download | |
| 49 | IS 12888 : 1989 |
Optical and mathematical instruments - Short range infrared distance measuring instruments specification | 0 | Mar, 2019 | Download | |
| 50 | IS 12937 : 1990 |
Engineering metrology - Methods of testing straightness, flatness and perpendicularity | 1 | Nov, 2024 | Download | |
| 51 | IS 13099 : 2001/ISO 5458 : 2018 (1 Revision) |
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Positional tolerancing (First Revision) | 0 | Mar, 2023 | Buy | |
| 52 | IS 13360 : Part 6 : Sec 3 : 2022/ISO 16016 : 2016 (3 Revision) |
PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD | 0 | ---- | Buy | |
| 53 | IS 13907 : 1994/ISO 7863 : 1984 |
Height setting micrometers and rising blocks - Specification | 0 | Jan, 2020 | Buy | |
| 54 | IS 1399 : 1959 |
Glossary of terms used in optical technology | 2 | Mar, 2022 | Download | |
| 55 | IS 1400 : 1960 |
Specification for optical glass | 1 | Mar, 2022 | Download | |
| 56 | IS 14260 : 1995/ISO 9385 |
Glass and glass - Ceramics - Knoop hardness test | 0 | Jun, 2023 | Buy | |
| 57 | IS 14271 : 1995 |
Engineering metrology - Dial snap gauges - Specification | 0 | Jan, 2020 | Download | |
| 58 | IS 14355 : 2022/ISO 17450-3:2016 (1 Revision) |
Zinc dust pigment for paints - Specification (First Revision) | 0 | ---- | Buy | |
| 59 | IS 14439 : Part 1 : 1997 |
Legal metrology - Gas volume meters: Part 1 general requirements | 1 | Apr, 2024 | Download | |
| 60 | IS 14439 : Part 2 : 1998 |
Leagal metrology - Gas volume meters: Part 2 diaphagm gas meters | 3 | Nov, 2019 | Download | |
| 61 | IS 1444 : 1989 (2 Revision) |
Engineers Pattern Drawing Boards - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 62 | IS 14633 : 1999 |
Blackboards for class rooms - Specification | 0 | Mar, 2019 | Download | |
| 63 | IS 1480 : 1970 (1 Revision) |
Specification metric scales for general purposes (First Revision) | 2 | Mar, 2021 | Download | |
| 64 | IS 1481 : 1970 (1 Revision) |
Specification for metric steel scales for engineers (First Revision) | 2 | Mar, 2019 | Download | |
| 65 | IS 14820 : Part 1 : 2016/ISO 11146-1 : 2021 (1 Revision) |
Lasers and laser - Related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios: Part 1 stigmatic and simple astigmatic beams (First Revision) | 0 | Mar, 2022 | Buy | |
| 66 | IS 14820 : Part 3 : 2016/ISO/TR 11146-3 : 2004 |
Lasers and laser - Related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios: Part 3 intrinsic and geometrical laser beam classification, propagation and details of test methods (First Revision) | 0 | Mar, 2022 | Buy | |
| 67 | IS 14859 : 2000 |
Specification for hindi (Devnagri) stencil templates and pen tips | 0 | Mar, 2021 | Download | |
| 68 | IS 1492 : 1970 (1 Revision) |
Specification for metric surveying chains (First Revision) | 2 | Mar, 2019 | Download | |
| 69 | IS 14929 : 2022/ISO 16610-29 : 2020 (1 Revision) |
Mixed polyolefin fibre ropes (first revision) | 2 | ---- | Buy | |
| 70 | IS 1493 : Part 10 : 2022/ISO 128-3:2022 |
Methods of chemical analysis of iron ores – Part 10 Determination of Zinc Content — Flame Atomic Absorption Spectrometric Method | 0 | ---- | Buy | |
| 71 | IS 14962 : Part 2 : 2001/ISO 965-2:1998 |
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality | 1 | Apr, 2023 | Buy | |
| 72 | IS 14962 : Part 5 : 2001/ISO 965-5:1998 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing | 1 | Apr, 2023 | Buy | |
| 73 | IS 14964 : 2001/ISO 12844 |
Raw optical glass - Grindability with diamond pellets - Test method and classification | 0 | Mar, 2022 | Buy | |
| 74 | IS/ISO 1501 : 2009/ISO 1501:2009 |
ISO miniature screw threads | 1 | Apr, 2024 | Buy | |
| 75 | IS 15044 : 2019/ISO 10579 : 2010 (1 Revision) |
Geometrical Product Specifications (GPS) -- Dimensioning and Tolerancing -- Non-rigid parts (First Revision) | 0 | Aug, 2023 | Buy | |
| 76 | IS 15084 : 2002 |
Spring balance - Tension type (For Use In Schools) - Specification | 0 | Oct, 2022 | Download | |
| 77 | IS 15085 : 2001 |
Decimeter cube (For Use In Schools) - Specification | 0 | Oct, 2022 | Download | |
| 78 | IS 15085 : 2001 |
Decimeter Cubes for Use in Schools | 0 | Oct, 2022 | Download | |
| 79 | IS 15197 : 2002 |
Kerosene heating lamp for use in school and college laboratories - Specification | 0 | Oct, 2022 | Download | |
| 80 | IS 15242 : 2002 |
Magnets (For Use In Schools And Colleges) - Specification | 0 | Oct, 2022 | Download | |
| 81 | IS 15242 : 2002 |
Magnets (for Use In Schools And--Colleges) — Specification | 0 | Oct, 2022 | Download | |
| 82 | IS 15261 : 2002/ISO 3274 : 1996 |
Geometrical product specifications (GPS) - surface texture : profile method - Nominal characteristics of contact (Stylus) instruments | 0 | Aug, 2023 | Buy | |
| 83 | IS 15264 : 2002/ISO 8785 : 1998 |
Geometrical product specification (GPS) - surface imperfections - Terms, definitions and parameters | 0 | Aug, 2023 | Buy | |
| 84 | IS 15371 : Part 2 : 2018/ISO 14253-2:2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 2 guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (First Revision) | 1 | Mar, 2023 | Buy | |
| 85 | IS 15371 : Part 3 : 2018/ISO 14253-3 : 2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 3 guidelines for achieving agreements on measurement uncertainty statements (First Revision) | 0 | Mar, 2023 | Buy | |
| 86 | IS 15371 : Part 4 : 2018/ISO/TS 14253-4 ; 2010 |
Geometrical Product Specifications (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment Part 4 Background on functional Limits and Specification Limits in Decision Rules | 0 | Mar, 2023 | Buy | |
| 87 | IS 15371 : Part 6 : 2018/14253-6 : 2012 |
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment Part 6 Generalized Decision Rules for the Acceptance and Rejection of Instruments and Workpieces | 0 | Mar, 2023 | Buy | |
| 88 | IS 15373 : 2003/ISO 4291 : 1985 |
Method for the assessment of departure from roundness - Measurement of variations in radius | 0 | Aug, 2023 | Buy | |
| 89 | IS 15374 : 2003/ISO 4292 : 1985 |
Methods for the assessment of departure from roundness - Measurement by twoand three - Point methods | 0 | Feb, 2019 | Buy | |
| 90 | IS 15421 : Part 1 : 2003/ISO 13565-1 : 1996 |
Geometrical product specifications (GPS) - Surface texture: profile method - surfaces having stratified functional properties: Part 1 filtering and general measurement conditions | 0 | Aug, 2023 | Buy | |
| 91 | IS 15422 : 2003/ISO 12085 : 1996 |
Geoivietrical product specifications (GPS) - Surface texture: profile method - motif parameters | 0 | Aug, 2023 | Buy | |
| 92 | IS 15423 : Part 1 : 2003/ISO 5436-1 : 2000 |
Geometrical product specifications (GPS) - Surface texture: profile method measurement standards: Part 1 material measures | 0 | Aug, 2023 | Buy | |
| 93 | IS 15423 : Part 2 : 2003/ISO 5436-2:2012 |
Geometrical product specifications (GPS) - Surface texture: profile method; measurement standards Part 2 software measurement standards | 0 | Feb, 2019 | Buy | |
| 94 | IS 15503 : Part 2 : 2014/ISO 9186-2 : 2008 |
Graphical symbols - Test methods: Part 2 method for testing perceptual quality (First Revision) | 0 | Aug, 2024 | Buy | |
| 95 | IS 15635 : Part 1 : 2006/ISO 10360-1 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 1 vocabulary | 0 | Mar, 2022 | Buy | |
| 96 | IS 15635 : Part 2 : 2014/ISO 10360-2 : 2009 (1 Revision) |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 2 CMMs used for measuring linear dimensions (First Revision) | 0 | Mar, 2021 | Buy | |
| 97 | IS 15635 : Part 3 : 2006/ISO 10360-3 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 3 CMMs with the axis of a rotary table as the fourth axis | 0 | Mar, 2022 | Buy | |
| 98 | IS 15635 : Part 6 : 2006/ISO 10360-6 : 2001 |
Geometrical product specifications (GPS) - acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 estimation of errors in computing gaussian associated features | 1 | Mar, 2021 | Buy | |
| 99 | IS 15635 : Part 7 : 2019/ISO 10360-7 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 7 CMMs equipped with imaging probing systems | 0 | Aug, 2023 | Buy | |
| 100 | IS 15635 : Part 8 : 2019/ISO 10360-8 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 8 CMMs equipped with optical distance sensors | 0 | Aug, 2023 | Buy | |
| 101 | IS 15635 : Part 9 : 2019/ISO 10360-9 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 9 CMMs with multiple probing systems | 0 | Aug, 2023 | Buy | |
| 102 | IS 15672 : 2006 |
Flow measurement of natural gas and fluids by coriolis meters | 0 | Mar, 2022 | Download | |
| 103 | IS 15673 : 2006 |
Folow mesasurment of natural gas by rotary piston meters | 1 | Mar, 2022 | Download | |
| 104 | IS 15674 : 2006 |
Flow measurement of natural gas by ultrasonic meter | 1 | Mar, 2022 | Download | |
| 105 | IS 15675 : 2006 |
Flow measurement of natural gas and fluids by orifice plate meters | 1 | Mar, 2022 | Download | |
| 106 | IS 15677 : 2006 |
Metering of natural gas - Code of practice | 1 | Mar, 2022 | Download | |
| 107 | IS 15934 : Part 3 : 2022/ISO 14405-2:2018 (1 Revision) |
LIQUID CRYSTAL DISPLAY DEVICES PART 3: LIQUID CRYSTAL DISPLAY LCD CELLS SECTIONAL SPECIFICATION | 0 | ---- | Buy | |
| 108 | IS 16150 : Part 1 : 2023/ISO 10110-8:2019 (1 Revision) |
Fish feed - Specification Part 1 Carp feed | 0 | ---- | Buy | |
| 109 | IS 16224 : Part 1 : 2014/ISO 12780-1 : 2011 |
Geometrical Product Specifications (GPS) - Straightness Part 1 Vocabulary and Parameters of Straightness | 0 | Jul, 2024 | Buy | |
| 110 | IS 16224 : Part 2 : 2014/ISO 12780-2 : 2011 |
Geometrical product specifications (GPS) - Straightness: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 111 | IS 16225 : Part 1 : 2014/ISO 12180-1 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 1 vocabulary and parameters of cylindrical form | 0 | Jul, 2024 | Buy | |
| 112 | IS 16225 : Part 2 : 2014/ISO 12180-2 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 113 | IS 16226 : Part 1 : 2014/ISO 12181-1 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 1 vocabulary and parameters of roundness | 0 | Jul, 2024 | Buy | |
| 114 | IS 16226 : Part 2 : 2014/ISO 12181-2 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 115 | IS 16294 : Part 2 : 2016/ISO 12781-2:2011 |
Geometrical product specifications (GPS) - Flatness: Part 2 specification operators | 0 | Mar, 2021 | Buy | |
| 116 | IS 16300 : 2014/ISO/TR 16015 : 2003 |
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence | 0 | Jul, 2024 | Buy | |
| 117 | IS 1632 : 1993 (1 Revision) |
Optical instruments - Bubbles - Specification (First Revision) | 0 | Mar, 2019 | Download | |
| 118 | IS 16324 : 2014/ISO 558 : 1980 |
Conditioning and Testing - Standard Atmospheres - Definitions | 0 | Aug, 2024 | Buy | |
| 119 | IS 16491 : Part 1 : 2016/ISO 13385-1:2019 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics | 0 | Mar, 2021 | Buy | |
| 120 | IS 16491 : Part 2 : 2016/ISO 13385-2 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics | 0 | Mar, 2021 | Buy | |
| 121 | IS 16531 : 2022/ISO 14405-3:2016 (1 Revision) |
Biodiesel Diesel Fuel Blend B8 to B20 Specification First Revision of IS 16531 | 0 | ---- | Buy | |
| 122 | IS 16561 : Part 6 : 2022/ISO/TS 17863:2013 |
ERGONOMIC DESIGN OF CONTROL CENTRES — PART 6: ENVIRONMENTAL REQUIREMENTS FOR CONTROL ROOMS | 0 | ---- | Buy | |
| 123 | IS 16748 : 2018/ISO 13102 : 2012 |
Geometrical Product Specifications (GPS)-Dimensional Measuring Equipment Electronic Digital-Indicator Gauge-Design and Metrological Characteristics | 0 | Mar, 2023 | Buy | |
| 124 | IS 17083 : Part 1 : 2019/ISO 14617-1:2005 |
Graphical symbols for diagrams: Part 1 General information and indexes | 0 | Aug, 2023 | Buy | |
| 125 | IS 17083 : Part 2 : 2019/ISO 14617-2 : 2002 |
Graphical symbols for diagrams: Part 2 Symbols having general application | 0 | Aug, 2023 | Buy | |
| 126 | IS 17083 : Part 3 : 2019/ISO 14617-3:2002 |
Graphical symbols for diagrams: Part 3 Connections and related devices | 0 | Aug, 2023 | Buy | |
| 127 | IS 17083 : Part 4 : 2019/ISO 14617-4:2002 |
Graphical symbols for diagrams: Part 4 Actuators and related devices | 0 | Aug, 2023 | Buy | |
| 128 | IS 17083 : Part 5 : 2019/ISO 14617-15:2002 |
Graphical symbols for diagrams: Part 5 Measurement and control devices | 0 | Aug, 2023 | Buy | |
| 129 | IS 17083 : Part 6 : 2019/ISO 14617-6:2002 |
Graphical symbols for diagrams: Part 6 Measurement and control functions | 0 | Aug, 2023 | Buy | |
| 130 | IS 17083 : Part 7 : 2019/ISO 14617-7:2002 |
Graphical symbols for diagrams: Part 7 Basic mechanical components | 0 | Aug, 2023 | Buy | |
| 131 | IS 17083 : Part 8 : 2019/ISO 14617-8:2002 |
Graphical symbols for diagrams: Part 8 Valves and dampers | 0 | Aug, 2023 | Buy | |
| 132 | IS 17083 : Part 9 : 2019/ISO 14617-9:2002 |
Graphical symbols for diagrams: Part 9 Pumps, compressors and fans | 0 | Aug, 2023 | Buy | |
| 133 | IS 17083 : Part 10 : 2019/ISO 14617-10:2002 |
Graphical symbols for diagrams: Part 10 Fluid power converters | 0 | Aug, 2023 | Buy | |
| 134 | IS 17083 : Part 11 : 2019/ISO 14617-11:2002 |
Graphical symbols for diagrams: Part 11 Devices for heat transfer and heat engines | 0 | Aug, 2023 | Buy | |
| 135 | IS 17083 : Part 12 : 2019/ISO 14617-12:2002 |
Graphical symbols for diagrams: Part 12 Devices for separating, purification and mixing | 0 | Aug, 2023 | Buy | |
| 136 | IS 17083 : Part 13 : 2019/ISO 14617-13:2004 |
Graphical symbols for diagrams: Part 13 Devices for material processing | 0 | Aug, 2023 | Buy | |
| 137 | IS 17083 : Part 14 : 2019/ISO 14617-14:2004 |
Graphical symbols for diagrams: Part 14 Devices for transport and handling of material | 0 | Aug, 2023 | Buy | |
| 138 | IS 17083 : Part 15 : 2019/ISO 14617-15:2002 |
Graphical symbols for diagrams: Part 15 Installation diagrams and network map | 0 | Aug, 2023 | Buy | |
| 139 | IS 17166 : 2019/ISO 15787:2016 |
Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications | 0 | Aug, 2023 | Buy | |
| 140 | IS 17167 : 2019/ISO 15226:1999 |
Technical product documentation -- Life cycle model and allocation of documents | 0 | Aug, 2023 | Buy | |
| 141 | IS 17170 : Part 1 : 2019/ISO 10628-1:2014 |
Diagrams for the chemical and petrochemical industry: Part 1 Specification of diagrams | 0 | Aug, 2023 | Buy | |
| 142 | IS 17170 : Part 2 : 2019/ISO 10628-2:2012 |
Diagrams for the chemical and petrochemical industry: Part 2 Graphical symbols | 0 | Aug, 2023 | Buy | |
| 143 | IS 17171 : 2019/ISO 3766:2003 |
Construction drawings -- Simplified representation of concrete reinforcement | 0 | Aug, 2024 | Buy | |
| 144 | IS 17173 : 2019/ISO 11091:1994 |
Construction drawings -- Landscape drawing practice | 0 | Aug, 2023 | Buy | |
| 145 | IS 17614 : Part 23 : 2021/ISO 10360-10:2021 |
Water Quality Sampling Part 23 Guidance on Passive Sampling in Surface Waters | 0 | ---- | Buy | |
| 146 | IS 1764 : 1961 |
Specification for trough compass | 0 | Mar, 2021 | Download | |
| 147 | IS 17661 : Part 3 : 2022/ISO 10209:2022 |
Ships and marine technology Marine NOX Reduction Agent AUS 40 Part 3: Handling transportation and storage | 0 | ---- | Buy | |
| 148 | IS 17734 : 2022/ISO/TS 17865:2016 |
PVC/Latex Tufted Coir Mats - Specification | 0 | ---- | Buy | |
| 149 | IS 17740 : 2022/ISO 16610-41: 2015 |
Isolated Towers, Masts and Poles using Structural Steel - Code of Practice | 0 | ---- | Buy | |
| 150 | IS 17753 : 2021/ISO 14253-5:2015 |
Paperbased Multilayer Laminated/Extruded Composite Cartons (Aseptic and Non-Aseptic) for Processed Liquid Food Products and Beverages — Specification | 2 | ---- | Buy | |
| 151 | IS 1779 : 1961 |
Specification for 4 - Metre, levelling staff, folding type | 0 | Mar, 2021 | Download | |
| 152 | IS 1781 : 2022/ISO 16610-61 : 2015 (2 Revision) |
Urea , technical - Specification (Second Revision) | 1 | ---- | Buy | |
| 153 | IS 17867 : Part 3 : 2022/ISO 16610-31:2016 |
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 3: Dimensions for connecting and interconnection cables | 0 | ---- | Buy | |
| 154 | IS 17868 : 2022/ISO 25178-73:2019 |
Spinning preparatory spinning and doubling twisting machinery Tubes for ring-spinning doubling and twisting spindles taper 1:38 and 1:64 | 0 | ---- | Buy | |
| 155 | IS 17907 : 2022/ISO 21920-3:2021 |
DOMESTIC METHANOL COOKSTOVE-CANISTER TYPE | 0 | ---- | Buy | |
| 156 | IS 17991 : 2022/ISO 16610-49 : 2015 |
Fine ceramics advanced ceramics advanced technical ceramics � Test method for hardness of monolithic ceramics at room temperature | 0 | ---- | Buy | |
| 157 | IS/ISO/IEC/TR 18121 : 2015/ISO 16610-60 : 2015 |
Information technology-Learning education and training- Virtual experiment framework | 0 | ---- | Buy | |
| 158 | IS 18143 : 2023/ISO 10110-19:2015 |
Animal feeding stuffs � Determination of aflatoxin B1 | 0 | ---- | Buy | |
| 159 | IS 1842 : 1961 |
Specification for surveying chain pins (Arrows) | 0 | Mar, 2021 | Download | |
| 160 | SP 19 : 1980 |
Guidelines for classification of quality of scraped surfaces | 0 | Mar, 2021 | Download | |
| 161 | IS 19012 : 2022/ISO 21920-1 : 2021 |
Nonanol - Specification | 0 | ---- | Buy | |
| 162 | IS 1932 : 2022/ISO 16610-22:2015 (3 Revision) |
Mustard and Rapeseed Oilcake as Livestock Feed Ingredient � Specification | 0 | ---- | Buy | |
| 163 | IS 1955 : 1961 |
Specification for prismatic compass, liquid | 0 | Mar, 2021 | Download | |
| 164 | IS 1957 : 1961 |
Specification for prismatic compasses, non - Liquid | 1 | Mar, 2021 | Download | |
| 165 | IS 196 : 1966 |
Atmospheric conditions for testing (Revised) | 1 | Mar, 2022 | Download | |
| 166 | IS B196 : 1966 |
Atmospheric Conditions for Testing (Revised)(BI-LINGUAL) | 0 | Dec, 2016 | Download | |
| 167 | IS 1966 : Part 2 : 2022/ISO 16610-21:2011 (3 Revision) |
Textiles - Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension (third revision) | 0 | ---- | Buy | |
| 168 | IS 2092 : 1983 (1 Revision) |
Specification for plunger type dial gauges (First Revision) | 1 | Feb, 2019 | Download | |
| 169 | IS 2102 : Part 1 : 1993/ISO 2768-1 : 1989 (3 Revision) |
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) | 0 | Apr, 2024 | Buy | |
| 170 | IS 2103 : 1980 (2 Revision) |
SPECIFICATION FOR ENGINEER - SQUARES ( Second Revision ) | 0 | Mar, 2022 | Download | |
| 171 | IS 2186 : 1985 (1 Revision) |
ISO metric external screw threads for interference fit applications (First Revision) | 0 | Feb, 2021 | Download | |
| 172 | IS 2202 : Part 1 : 2023/ISO 16610-62 : 2023 (7 Revision) |
Wooden Flush Door Shutters (Solid Core Type) — Specification Part 1 Plywood Face Panels ( Seventh Revision ) | 1 | ---- | Buy | |
| 173 | IS 2220 : 1990 (1 Revision) |
Engineering metrology - Steel straightedges - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 174 | IS/ISO 22319 : 2017/ISO 129-4 : 2013 |
Security and Resilience � Community resilience � Guidelines for planning the involvement of spontaneous volunteers | 0 | Mar, 2024 | Buy | |
| 175 | IS 2233 : 1962 |
Specification for straightedges for drawing office use | 0 | Mar, 2021 | Download | |
| 176 | IS 2288 : 1963 |
Specification for ranging rods | 0 | Mar, 2021 | Download | |
| 177 | IS 2383 : 1963 |
Code of practice for calibration of vehicle tanks for petroleum products and other liquids | 0 | Mar, 2022 | Download | |
| 178 | IS 2466 : 1963 |
Specification for beam compasses | 0 | Mar, 2021 | Download | |
| 179 | IS 2473 : 1975 (1 Revision) |
Dimensions for centre holes (First Revision) | 2 | Sep, 2024 | Download | |
| 180 | IS 2533 : 1978 (1 Revision) |
Specification for geometry boxes (First Revision) | 3 | Oct, 2022 | Download | |
| 181 | IS 2539 : 1963 |
Specification for plane tables | 1 | Mar, 2021 | Download | |
| 182 | IS 2540 : 2008 (1 Revision) |
Dimensions for threaded centre holes (First Revision) | 0 | Dec, 2019 | Download | |
| 183 | IS 2556 : Part 1 : 2021/ISO 17450-2:2012 (4 Revision) |
Vitreous China sanitary appliances - Specification: Part 1 General requirements (fourth revision) | 0 | ---- | Buy | |
| 184 | IS 2643 : 2005/ISO 228-1:2000 (3 Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) | 0 | Feb, 2021 | Buy | |
| 185 | IS 2747 : 1990 (1 Revision) |
Taximeters - performance requirements (First Revision) | 2 | Mar, 2022 | Download | |
| 186 | IS 2754 : 1964 |
Genral requirements for optical instruments | 2 | Mar, 2022 | Download | |
| 187 | IS 2769 : 1969 (1 Revision) |
Sizes for squares and square holes for general engineering purposes (First Revision | 0 | Sep, 2024 | Download | |
| 188 | IS 2911 : Part 3 : 2021/ISO 14978:2018 (2 Revision) |
Design and construction of pile foundations - Code of practice: Part 3 Under-reamed piles (second revision) | 0 | ---- | Buy | |
| 189 | IS 2921 : 2016/ISO 13225 (2 Revision) |
Geometrical product specifications (GPS) - Dimensional measuring equipment; height gauges - Design and metrological characteristics (Second Revision) | 0 | Mar, 2021 | Buy | |
| 190 | IS 2966 : 1964 |
Specification for internal micrometers (Including Stick Micrometers) | 1 | Feb, 2019 | Download | |
| 191 | IS 2976 : 1964 |
Specification for optical theodolite | 0 | Mar, 2022 | Download | |
| 192 | IS 2988 : 1995 (1 Revision) |
Vernier theodolite - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 193 | IS 3025 : Part 24 : Sec 2 : 2021/ISO 17450-4:2017 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 24 Sulphates Section 2 Method by Continuous Flow Analysis | 0 | ---- | Buy | |
| 194 | IS 3032 : 1965 |
General requirements for testing the accuracy of commercial measuring instruments used in petroleum trade | 0 | Mar, 2022 | Download | |
| 195 | IS 3081 : 1994 (1 Revision) |
Microscopes - General purposes - Dimensions and marking (First Revision) | 0 | Mar, 2019 | Download | |
| 196 | IS 3099 : Part 1 AND 2 : 1992 (1 Revision) |
Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision) | 4 | Mar, 2019 | Download | |
| 197 | IS 3113 : 1965 |
Specification for prismatic binoculars for common use | 1 | Mar, 2021 | Download | |
| 198 | IS 3135 : 1965 |
Specieication for cathetometer | 0 | Mar, 2021 | Download | |
| 199 | IS 3179 : 1990 (2 Revision) |
Engineering metrology - Feeler gauges (second revision) | 0 | Jan, 2020 | Download | |
| 200 | IS 3206 : 1989 (1 Revision) |
Engineers Drawing Instruments - Dividers - Specification ( First Revision ) | 0 | Mar, 2019 | Download | |
| 201 | IS 3207 : 1989 (1 Revision) |
Engineers' Drawing Instruments - Rotating Compasses | 0 | Mar, 2019 | Download | |
| 202 | IS 3208 : 1989 (1 Revision) |
Engineers drawing instruments - Half set of compasses - Specification (First Revision) | 0 | Mar, 2019 | Download | |
| 203 | IS 3209 : 1989 (1 Revision) |
Engineers Drawing Instruments - Spring Bow Compasses - Specification ( First Revision ) | 0 | Mar, 2019 | Download | |
| 204 | IS 3210 : 1989 (1 Revision) |
Engineers' Drawing Instruments - Drawing Pens | 0 | Mar, 2019 | Download | |
| 205 | IS 3211 : 1991 (1 Revision) |
Engineers Drawing Instruments, Pen Points (First Revision) | 0 | Mar, 2021 | Download | |
| 206 | IS 3213 : 1991 (1 Revision) |
Engineers Drawing Instruments - Handles - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 207 | IS 3214 : 1991 (1 Revision) |
Engineers Drawing Instruments, Pencil Points - Specification ( First Revision ) | 0 | Mar, 2021 | Download | |
| 208 | IS 3215 : 1991 (1 Revision) |
Engineers Drawing Instruments - Needle Points - Specification ( First Revision ) | 1 | Mar, 2021 | Download | |
| 209 | IS 3216 : 1989 (1 Revision) |
Engineers Drawing Instruments, Needles - Specification ( First Revision ) | 0 | Mar, 2019 | Download | |
| 210 | IS 3217 : 1991 (1 Revision) |
Engineers Drawing Instruments, Prickers - Specification ( First Revision ) | 0 | Mar, 2021 | Download | |
| 211 | IS 3218 : 1968 |
Specification for parallel rulers, 150 mm (Link Type) | 0 | Mar, 2019 | Download | |
| 212 | IS 3219 : 1966 |
Specification For Engineers Drawing Instruments, Boxes for Leads and Needles | 0 | Mar, 2021 | Download | |
| 213 | IS 3220 : 1966 |
Specification For Engineers Drawing Instruments, Screw Drivers | 0 | Mar, 2021 | Download | |
| 214 | IS 3221 : 1966 |
Sets for drawing instruments | 0 | Mar, 2021 | Download | |
| 215 | IS 3222 : Part 1 : 1989 (1 Revision) |
Instrument screws - Specification: Part 1 fasteners for drawing instruments (First Revision) | 0 | Mar, 2019 | Download | |
| 216 | IS 3403 : 1981 |
Dimensions for knurls (First Revision) | 0 | Sep, 2024 | Download | |
| 217 | IS 3406 : Part 1 : 1986 (2 Revision) |
Dimensions for countersinks and counterbores: Part 1 countersinks (Second Revision) | 0 | Sep, 2024 | Download | |
| 218 | IS 3406 : Part 2 : 2014 (3 Revision) |
Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision) | 0 | Dec, 2019 | Download | |
| 219 | IS 3428 : 2009 (2 Revision) |
Dimensions for relief grooves (Second Revision) | 0 | Dec, 2019 | Download | |
| 220 | IS 3455 : Part 1 : 1985 (1 Revision) |
Gauging practice for plain workpieces: Part 1 inspection of plain workpieces with indicative measuring instruments | 1 | Jan, 2020 | Download | |
| 221 | IS 3457 : 2009 (1 Revision) |
Radii for rounding for general engineering purposes (Second Revision) | 0 | Apr, 2024 | Download | |
| 222 | IS 3512 : 1966 |
Specification for Toolmakers Straightedges | 1 | Feb, 2019 | Download | |
| 223 | IS 3686 : 1966 |
Specification for student - Type microscope | 2 | Mar, 2021 | Download | |
| 224 | IS 3708 : Part 5 : 2022/ISO 16610-71 : 2014 (4 Revision) |
METHODS OF TEST FOR NATURAL RUBBER LATEX PART 5 DETERMINATION OF KOH NUMBER Fourth Revision | 0 | ---- | Buy | |
| 225 | SP 42 : 2008 (1 Revision) |
Survey of screw threads (First Revision) | 0 | Feb, 2021 | Download | |
| 226 | IS 4210 : 1967 |
Specification for strip feeler gauges for electrical purposes | 1 | Nov, 2024 | Download | |
| 227 | IS 4211 : 1993 (1 Revision) |
Gauges - Thread pitch gauges for ISO metric screw threads (Pitch Range 0.4 To 6 Mm) - Specification (First Revision) | 0 | Feb, 2019 | Download | |
| 228 | IS 4218 : Part 1 : 2001/ISO 68-1:1998 (2 Revision) |
ISO general purpose metric screw threads: Part 1 basic profile - second revision) | 1 | Apr, 2023 | Buy | |
| 229 | IS 4218 : Part 2 : 2001/ISO 261:1998 (2 Revision) |
ISO general purpose metric screw threads: Part 2 general plan (Second Revision) | 0 | Apr, 2023 | Buy | |
| 230 | IS 4218 : Part 3 : 1999/ISO 724 : 1993 (2 Revision) |
ISO general purpose metric screw threads: Part 3 basic dimensions (Second Revision) | 1 | Feb, 2021 | Buy | |
| 231 | IS 4218 : Part 4 : 2001/ISO 262:1998 (2 Revision) |
ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision) | 0 | Apr, 2023 | Buy | |
| 232 | IS 4241 : 1990 (1 Revision) |
Engineering metrology - Engineer Parallels - Specification ( First Revision ) | 0 | Jan, 2020 | Download | |
| 233 | IS/ISO 4301 : Part 2 : 2022/ISO 16610-20:2015 (1 Revision) |
Cranes Classification Part 2 Mobile Cranes (First Revision) | 0 | ---- | Buy | |
| 234 | IS 4328 : 1967 |
Specification for monocular dissecting microscope | 2 | Mar, 2021 | Download | |
| 235 | IS 4329 : 1967 |
Specification for measuring (Travelling) microscope | 2 | Mar, 2021 | Download | |
| 236 | IS 4349 : 1987 (1 Revision) |
Specification for cylindrical setting masters (First Revision) | 0 | Nov, 2024 | Download | |
| 237 | IS 4380 : 1967 |
Specification for abney level | 1 | Mar, 2021 | Download | |
| 238 | IS 4440 : 1996 (1 Revision) |
Engineering metrology - Precision equipment - Slip gauge accessories (First Revision) | 0 | Feb, 2019 | Download | |
| 239 | IS 4492 : 1968 |
Specification for welded V - Blocks (Diameter Range 300 To 2000 Mm) | 1 | Feb, 2019 | Download | |
| 240 | IS 4590 : 1980 (1 Revision) |
Specification for secondary level (First Revision) | 1 | Mar, 2021 | Download | |
| 241 | IS 4695 : Part 1 : 2003 (2 Revision) |
General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision) | 0 | Feb, 2021 | Download | |
| 242 | IS 4695 : Part 2 : 2003 (2 Revision) |
General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision) | 0 | Feb, 2021 | Download | |
| 243 | IS 4696 : Part 1 : 2004 (1 Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 1 THREAD PROFILES (Second Revision) | 0 | Dec, 2019 | Download | |
| 244 | IS 4696 : Part 2 : 2004 (1 Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 2 PITCH DIAMETER COMBINATIONS (Second Revision) | 0 | Dec, 2019 | Download | |
| 245 | IS 4696 : Part 3 : 2004 (2 Revision) |
Dimensions for metric buttress threads: Part 3 basic dimensions (Second Revision) | 0 | Dec, 2019 | Download | |
| 246 | IS 4696 : Part 4 : 2005 (1 Revision) |
Dimensions for metric buttress threads: Part 4 tolerancing system (Second Revision) | 0 | Feb, 2021 | Download | |
| 247 | IS/ISO 4708 : 2017/ISO 21920-2:2021 |
Composition cork— Gasket material — Test methods | 0 | ---- | Buy | |
| 248 | IS 4838 : 1990 (2 Revision) |
Anthropometric dimensions for school children age group 5 - 17 years (Second Revision) | 0 | May, 2020 | Download | |
| 249 | IS 4960 : 1968 |
Specification for universal and elongated type V - Blocks | 0 | Jan, 2020 | Download | |
| 250 | IS 4966 : Part 1 : 1969 |
Specification for gauges for serrations: Part 1 for gauging external serrations | 0 | Feb, 2019 | Download | |
| 251 | IS 4966 : Part 2 : 1969 |
Specification for gauges for serrations: Part 2 for gauging internal serrations | 0 | Feb, 2019 | Download | |
| 252 | IS 5146 : 1969 |
Specification for sounding sextant | 0 | Mar, 2021 | Download | |
| 253 | IS 5148 : 1969 |
Specification for hand magnifiers (Circular) - 50, 75 and 100 mm | 0 | Mar, 2021 | Download | |
| 254 | IS 5153 : 1969 |
Specification for proportional compasses - 150, 200 and 300 mm | 1 | Mar, 2019 | Download | |
| 255 | IS 5204 : 1969 |
Specifiction for research microscope | 3 | Mar, 2021 | Download | |
| 256 | IS 5205 : 1969 |
Specification for drawing pins | 0 | Mar, 2019 | Download | |
| 257 | IS 5268 : Part 1 : 1991 (1 Revision) |
Engineering metrology - Straightedges: Part 1 cast iron straightedges (bow shaped or camel back type and 1-Section or parallel type) (First Revision) | 1 | Mar, 2022 | Download | |
| 258 | IS 5273 : 1969 |
Specification for radius gauges | 2 | Feb, 2019 | Download | |
| 259 | IS 5359 : 1987 (1 Revision) |
Specification for sine bars (First Revision) | 0 | Feb, 2019 | Download | |
| 260 | IS 5388 : 1983 (2 Revision) |
Specification for hexagon handles for plain and threaded plug gauges (Second Revision) | 1 | Feb, 2019 | Download | |
| 261 | IS 5415 : 1969 |
Code of practice for packing and packaging of optical and mathematical instruments and components | 0 | Mar, 2019 | Download | |
| 262 | IS 5440 : 1969 |
Specification for optical flats | 1 | Jan, 2020 | Download | |
| 263 | IS/ISO 55002 : 2018/ISO 10360-12:2016 (1 Revision) |
Asset Management Management Systems Guidelines for the application of ISO 55001 | 0 | ---- | Buy | |
| 264 | IS 554 : 1999/ISO 7-11 : 1994 (4 Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) | 1 | Apr, 2024 | Buy | |
| 265 | IS 5694 : 1970 |
Specification For Engineers, Drawing Instruments, Dotting Pens | 1 | Mar, 2019 | Download | |
| 266 | IS 5706 : 1993 (1 Revision) |
Optical instruments - Spirit levels for use in precision engineering - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 267 | IS 5726 : 1970 |
Specification For Engineers Drawing Instruments, Bordering Pens | 1 | Mar, 2019 | Download | |
| 268 | IS 5737 : 1970 |
Specification For Engineers Drawing Instruments, Curve Pens | 0 | Mar, 2019 | Download | |
| 269 | IS 5920 : 1970 |
Recommendation for preparation of drawings for optical elements and systms | 1 | Mar, 2019 | Download | |
| 270 | IS 5928 : 1970 |
Specification for tangent clinometer | 0 | Mar, 2021 | Download | |
| 271 | IS 5939 : 1970 |
Specification for single angle sine tables | 0 | Mar, 2022 | Download | |
| 272 | IS 5943 : 1970 |
Specification for compound angle sine tables | 0 | Mar, 2022 | Download | |
| 273 | IS 5947 : 1970 |
Charts for recording meteorological instruments | 1 | Feb, 2019 | Download | |
| 274 | IS 5979 : 1981 (1 Revision) |
Specification for sine centres (First Revision) | 0 | Mar, 2022 | Download | |
| 275 | IS 5980 : 1978 (1 Revision) |
Specification for bench centres (Firsf Revision) | 0 | Jan, 2020 | Download | |
| 276 | IS 5994 : 2022/16610-85 : 2013 (4 Revision) |
Agricultural Tractors - Test Code (Fourth Revision) | 0 | ---- | Buy | |
| 277 | IS/IEC 60834 : Part 1 : 1999/14880-4:2006 |
Teleprotection equipment of power systems Performance and testing Part 1: Command systems | 0 | ---- | Buy | |
| 278 | IS 6137 : 1983 (2 Revision) |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision) | 0 | Feb, 2019 | Download | |
| 279 | IS 6150 : 1971 |
Specification for ISO metric screw thread measuring prisms | 1 | Feb, 2019 | Download | |
| 280 | IS 6231 : 1971 |
Specification for prismatic angle gauges | 0 | Feb, 2019 | Download | |
| 281 | IS 6239 : 2021/ISO 129-1:2018 (3 Revision) |
Textiles - Man-made Fibres - Generic Names (Third Revision) | 0 | ---- | Buy | |
| 282 | IS 6244 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision) | 1 | Mar, 2022 | Download | |
| 283 | IS 6246 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 120 Up To And Including 250 mm) (First Revision) | 1 | Mar, 2022 | Download | |
| 284 | IS/IEC 62680 : Part 1 : Sec 1 : 2015/ISO 16610-28 : 2016 |
Universal serial bus interfaces for data and power - Part 1-1: Common components - USB Battery Charging Specification | 0 | ---- | Buy | |
| 285 | IS/IEC 62680 : Part 1 : Sec 2 : 2022/ISO 16610-30 : 2015 |
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER PART 1-2: COMMON COMPONENTS USB POWER DELIVERY SPECIFICATION | 0 | ---- | Buy | |
| 286 | IS 6311 : 1978 (1 Revision) |
Specification for ISO metric screwthread measuring cylinders (First Revision) | 1 | Jan, 2020 | Download | |
| 287 | IS 6425 : 1971 |
Specification for dioptometer (Lensometer) | 2 | Mar, 2019 | Download | |
| 288 | IS 6471 : 1971 |
Specification for spectrometer (Student Type) | 1 | Mar, 2019 | Download | |
| 289 | IS 6590 : 2023/ISO 10110-17:2004 (1 Revision) |
ROPES FOR MOUNTAINEERING � SPECIFICATIONS | 0 | ---- | Buy | |
| 290 | IS 6952 : 1990 (1 Revision) |
Engineering metrology - Cylindrical squares - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 291 | IS 6973 : 1973 |
Specification for precision angle plates | 0 | Jan, 2020 | Download | |
| 292 | IS 6985 : 1973 |
Specification for precision box angle plates | 0 | Jan, 2020 | Download | |
| 293 | IS 6987 : 1973 |
Specification for steel precision polygons | 0 | Jan, 2020 | Download | |
| 294 | IS 7009 : 1973 |
Specification for optical square (For Surveying) | 0 | Mar, 2019 | Download | |
| 295 | IS 7010 : 1973 |
Specification for pivots for magnetic compasses | 1 | Mar, 2021 | Download | |
| 296 | IS 7014 : 1973 |
Specification for length bars | 1 | Jan, 2020 | Download | |
| 297 | IS 7018 : Part 2 : 1983 (1 Revision) |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision) | 0 | Feb, 2019 | Download | |
| 298 | IS 7047 : 1973 |
Timbers used in instrument industry | 0 | Mar, 2021 | Download | |
| 299 | IS 7078 : 1973 |
Plastics used in instrument industry | 0 | Mar, 2021 | Download | |
| 300 | IS 7265 : 1973 |
Coating materials (Metals, Alloys And Dielectrics) used in optical instrument industry | 0 | Mar, 2022 | Download | |
| 301 | IS 7327 : 2003/ISO 8512-2 : 1990 (2 Revision) |
Engineering metrology - Measuring equipment - Granite surface plates - Specification (Second Revision) | 0 | Aug, 2023 | Buy | |
| 302 | IS 746 : 2021/ISO 14405-1:2016 (2 Revision) |
Textiles Handloom cotton blankets grey or coloured Specification | 0 | ---- | Buy | |
| 303 | IS 7543 : 1975 |
Specification for planimeters | 0 | Mar, 2019 | Download | |
| 304 | IS 7544 : 1975 |
Specification For Parallel Ruler ( Roller Type ) | 0 | Mar, 2019 | Download | |
| 305 | IS 7545 : 1975 |
Specification for optical bench (Advanced Type) | 0 | Mar, 2019 | Download | |
| 306 | IS 7599 : Part 2 : 1975 |
General Requirements for Engineer's Comparators With Stand - Part II : Comparator Standard | 0 | Mar, 2022 | Download | |
| 307 | IS 7604 : 1975 |
Specification for length bar accessories | 0 | Mar, 2022 | Download | |
| 308 | IS 7606 : 1982 (1 Revision) |
Specification for plain adjustable snap gauges (First Revision) | 0 | Mar, 2022 | Download | |
| 309 | IS 7615 : 2003 (2 Revision) |
System of cone tolerance for conical workpiece from c = 1:3 to 1:500 and lengths from 6 to 630 mm (Second Revision) | 0 | Apr, 2024 | Download | |
| 310 | IS 7684 : 1975 |
LIMITS OF SIZES FOR ISO METRIC TRAPEZOIDAL NUT THREADS DIAMETER RANGE 8 TO 100 mm | 1 | Feb, 2021 | Download | |
| 311 | IS 7685 : 1975 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 8 To 100 Mm) | 1 | Feb, 2021 | Download | |
| 312 | IS 7726 : 1975 |
Limits of sizes for ISO metric trapezoidal nut threads (Diameter Range 105 To 300 Mm) | 1 | Sep, 2024 | Download | |
| 313 | IS 7727 : 1975 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 105 To 300 Mm) | 1 | Sep, 2024 | Download | |
| 314 | IS 774 : 2021/ISO 17450-1:2011 (6 Revision) |
Ceramic (Vitreous China) flushing cisterns for water closets and urinals - Specification (sixth revision) | 0 | ---- | Buy | |
| 315 | IS 7859 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for inside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
| 316 | IS B786 : 1967 (1 Revision) |
Guide for inter - Conversion of values from one system of units to another | 1 | Mar, 2022 | Download | |
| 317 | IS B786 (Supplement) : 1967 (1 Revision) |
Conversion factors and conversion tables (First Revision) | 0 | Mar, 2022 | Download | |
| 318 | IS 787 : 1956 |
Guide for inter - Conversion of values from one system of units to another | 0 | Mar, 2022 | Download | |
| 319 | IS 7876 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
| 320 | IS 7919 : 1975 |
Specification for refractometer - abbe type | 0 | Mar, 2019 | Download | |
| 321 | SP 8 : 1970 |
Mathematical physical, chemical and engineering tables | 1 | Mar, 2022 | Download | |
| 322 | IS 8000 : Part 1 : 2019/ISO 1101:2017 (2 Revision) |
Geometrical product specifications (GPS) -- Geometrical tolerancing: Part 1 Tolerances of form, orientation, location and run-out (Second Revision) | 0 | Aug, 2023 | Buy | |
| 323 | IS 8023 : 1991 (1 Revision) |
Gauges - Single ended progressive type plate snap gauges (Up to 160 mm) - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 324 | IS 8189 : 2023/ISO 10110-5:2015 (2 Revision) |
SPECIFICATION FOR RUBBER HOSE AND HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE | 0 | ---- | Buy | |
| 325 | IS 8248 : 1976 |
Specification for antireflection coating on glass optical components | 0 | Mar, 2022 | Download | |
| 326 | IS 8275 : 1976 |
Specification for binocular eyepication for microscope | 1 | Mar, 2019 | Download | |
| 327 | IS 828 : Part 1 : 2023/ISO 10110-11:2016 (3 Revision) |
Cricket Bats - Specification Part 1 for Leather Ball use | 0 | ---- | Buy | |
| 328 | IS 8311 : 1976 |
Specification for instrument jewels | 1 | Mar, 2019 | Download | |
| 329 | IS 8330 : 2004 (2 Revision) |
Tripods for surveying instruments - Fixed leg type - Specification (Second Revision) | 0 | Mar, 2019 | Download | |
| 330 | IS 8390 : 1977 |
Specification for are combs | 0 | Mar, 2019 | Download | |
| 331 | IS 8622 : 1999 (1 Revision) |
Wire wound sliding contact rheostats for use in educational institutions - Specification (First Revision) | 0 | Mar, 2019 | Download | |
| 332 | IS 8630 : 1977 |
Specification For Engineers Drawing Instruments, Double Line Pens | 1 | Mar, 2021 | Download | |
| 333 | IS 8651 : 1977 |
Specification for flame photometer | 0 | Mar, 2019 | Download | |
| 334 | IS 8661 : 1977 |
Specification for polarimeter and saccharimeter (Optical) | 0 | Mar, 2019 | Download | |
| 335 | IS 8679 : 1978 |
Specification for triangular scales | 0 | Mar, 2021 | Download | |
| 336 | IS 8680 : 1978 |
Specification For Engineers Drawing Instruments, Compass, Bow Pen, Double Knee Jointed with Sector Head Joints | 0 | Mar, 2021 | Download | |
| 337 | IS 8681 : 1978 |
Specification For Engineers Drawing - Instruments, Compass, Bow Pencil, Double Knee Jointed with Sector Head Joints | 0 | Mar, 2021 | Download | |
| 338 | IS 8691 : 1986 (1 Revision) |
Specification for mirror stereoscope (First Revision) | 0 | Mar, 2021 | Download | |
| 339 | IS 8788 : 2002 (2 Revision) |
Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision) | 0 | Sep, 2024 | Download | |
| 340 | IS 8823 : 1978 |
Specification for triangular straightedges | 0 | Jan, 2020 | Download | |
| 341 | IS 8841 : 1978 |
Recommendations for limits and flTs for sizes above 3 i50 mm up to io 000 mm | 0 | Apr, 2024 | Download | |
| 342 | IS 8916 : 1978 |
Specification for spherometbr | 0 | Oct, 2022 | Download | |
| 343 | IS 8999 : 2003/ISO 7-2 : 2000 (1 Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Verification by means of limit gauges (First Revision) | 0 | Aug, 2023 | Buy | |
| 344 | IS 9107 : 1979 |
Specification for autocollimator | 2 | Mar, 2019 | Download | |
| 345 | IS/ISO 9176 : 1988/ISO 9176 : 1988 |
Tubular technical pens - Adaptor for compasses | 0 | Mar, 2021 | Buy | |
| 346 | IS/ISO 9179 : PART 1 : 1988/ISO 9179 : PART 1 : 1988 |
Technical drawings - Numerically controlled draughting machines | 0 | Mar, 2021 | Buy | |
| 347 | IS/ISO 9180 : 1998/ISO 9180 : 1998 (1 Revision) |
Black leads for wood - Cased pencils - Classification and diameters | 0 | Mar, 2021 | Buy | |
| 348 | IS 919 : Part 1 : 2014/ISO 286-1 : 2010 |
Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision) | 1 | Apr, 2024 | Buy | |
| 349 | IS 9246 : 2022/ISO 16792 : 2021 (1 Revision) |
Chapati Machine - Specification | 0 | ---- | Buy | |
| 350 | IS 9441 : 1979 |
Specification for sextant | 0 | Oct, 2022 | Download | |
| 351 | IS 9475 : 1986 (1 Revision) |
Specification for plug and ring gauges for self release 7/24 tapers (First Revision) | 0 | Mar, 2022 | Download | |
| 352 | IS 9514 : 1980 |
Specification for front surface aluminized mirrors | 0 | Mar, 2021 | Download | |
| 353 | IS 9529 : 1980 |
Specification for taper plug gauges and taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members | 0 | Mar, 2022 | Download | |
| 354 | IS 9571 : 1980 |
Specification for photoelectric colorimeter (Single Beam) | 0 | Mar, 2021 | Download | |
| 355 | IS 9607 : 1980 |
Specification for tertiary level | 1 | Mar, 2021 | Download | |
| 356 | IS 9608 : 1985 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size range above M40 up to and Including M120) (First Revision) | 0 | Jan, 2020 | Download | |
| 357 | IS 9610 : 1985 (1 Revision) |
Specification for go and no go screw ring gauges for ISO metric screw threads (Size range from M1 up to and including M100) (First Revision) | 0 | Jan, 2020 | Download | |
| 358 | IS 9613 : 1980 |
Specification for primary level | 0 | Mar, 2021 | Download | |
| 359 | IS 9631 : 1983 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range From M1 up to and Including M40) (First Revision) | 1 | Feb, 2019 | Download | |
| 360 | IS 9680 : 1980 |
Materials for light duty springs for instrument industry | 0 | Mar, 2019 | Download | |
| 361 | IS/ISO 9849 : 1991/ ISO 984 |
Optics and optical instruments - Geodetic instruments - Vocabulary | 0 | Mar, 2022 | Buy | |
| 362 | IS 988 : 1959 |
General requirements for optical components | 0 | Mar, 2022 | Download | |
| 363 | IS 9892 : 1981 |
Specification for subtense bar | 0 | Mar, 2019 | Download | |
| 364 | IS 9898 : 1981 |
Specification for heliotrope, surveying | 0 | Mar, 2019 | Download | |
| 365 | IS/ISO 9960 : PART 1 : 1992/ISO 9960 : PART 1 : 1992 |
Draughting instruments with or without graduation: Part 1 draughting scale rules | 0 | Nov, 2022 | Buy | |
| 366 | IS/ISO 9962 : PART 3 : 1994/ISO 9962 : PART 3 : 1994 |
Manually orerated draughting machines: Part 3 dimensions of scale rule chuck plates | 0 | Nov, 2022 | Buy | |
| 367 | IS 9972 : 2023/ISO 10110-12:2019 (2 Revision) |
Automatic Sprinkler Heads for Fire Protection Service - Specification (Second Revision) | 0 | ---- | Buy |