1
IS 101 : Part 10 : Sec 4 : 2018
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 4 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Processing and analysis of data from dummy cells
CHD 20
Methods of tests
2
IS 1802 : 2005
Ionone - Specification (Third Revision)
PCD 18
3
Product Specification
3
IS 3926 : 2024
Methyl Cinnamate — Specification (Second Revision)
PCD 18
2
Product Specification
4
IS 4272 : 2024
Vanillin — Specification (Second Revision)
PCD 18
2
Product Specification
5
IS 4056 : 1966
Specification for fish oil for leather industry
CHD 17
Product Specification
6
IS 101 : Part 10 : Sec 5 : 2018
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 5 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Examples of spectra of polymer - Coated and uncoated specimens
CHD 20
Methods of tests
7
IS 104 : 2017
Specification for ready mixed paint, brushing, zinc chrome, priming (Third Revision)
CHD 20
3
Product Specification
8
IS 16984 : 2018
Folding box board for general consumer product packaging - Specification
CHD 16
Product Specification
9
IS 16985 : 2018
Duplex board/coated duplex board - Specification
CHD 16
Product Specification
10
IS 101 : Part 1 : Sec 8 : 2022
Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical): Sec 8 Pigments and extenders - determination of pH value of an aqueous suspension (First Revision)
CHD 20
1
Methods of tests
11
IS 4054 : 1966
Specification for neatsfoot oil
CHD 17
Product Specification
12
IS 230 : 1972
Specification for normal butyl acetate (Second Revision)
PCD 9
2
Product Specification
13
IS 231 : 1957
Specification for amyl acetate
PCD 9
Product Specification
14
IS 501 : 1976
Specification for oxalic acid, technical and analytical reagent (Second Revision)
PCD 9
2
Product Specification
15
IS 717 : 1998
Carbon disulphide, technical - Specification (Second Revision)
PCD 9
2
Product Specification
16
IS 880 : 1956
Specification for tartaric acid
PCD 9
Product Specification
17
IS 2979 : 1964
Specification for fusel oil
PCD 9
Product Specification
18
IS 15133 : 2002
2,6 - Dichloro - 4 - Nitroaniline - Specification
PCD 26
Product Specification
19
IS 15132 : 2002
Ortho - Chloro para - Nitro aniline - Specification
PCD 26
Product Specification
20
IS 15131 : 2020
2,6 Dibromo-4-Nitroaniline — Specification ( First Revision )
PCD 26
1
Product Specification
21
IS 15079 : 2001
2:4 - Dinitroroaniline, technical - Specification
PCD 26
Product Specification
22
IS 12019 : 1987
Specification for 2'-Chloro-(4'-Sulphophenyl)-3-Methyl-5-Pyrazolone
PCD 26
Product Specification
23
IS 12706 : 1989
Dye intermediates - Naphthol AS - E - Specification
PCD 26
Product Specification
24
IS 12707 : 1989
Dye intermediates Naphthol AS - D - Specification
PCD 26
Product Specification
25
IS 13590 : 1992
acetoacet - 2 - anisidide - Specification
PCD 26
Product Specification
26
IS 13841 : 1993
5 - Sulfoanthranilic acid, technical - Specification
PCD 26
Product Specification
27
IS 13843 : 1993
Acetoacet - 3 - Xylidide - Specification
PCD 26
Product Specification
28
IS 4306 : 1987
Specification for hexamethylenetetramine (hexamine)(Second Revision)
PCD 9
2
Product Specification
29
IS 5158 : 1987
Specification for phthalic anhydride, technical (Second Revision)
PCD 9
2
Product Specification
30
IS 5254 : 1980
Specification for acetanllide, technical (First Revision)
PCD 9
1
Product Specification
31
IS 5271 : 1984
Specification for paraformaldehyde (First Revision)
PCD 9
1
Product Specification
32
IS 5297 : 1977
Specification for perchloroethylene (tetrachloroethylene), technical (First Revision)
PCD 9
1
Product Specification
33
IS 5341 : 1980
Specification for benzyl chloride, technical (First Revision)
PCD 9
1
Product Specification
34
IS 5573 : 1984
Specification for ethylene oxide (First Revision)
PCD 9
1
Product Specification
35
IS 5591 : 2003
Chlorobenzene - Specification (First Revision)
PCD 9
1
Product Specification
36
IS 5992 : 1970
Specification for p - Dichlorobenzene, technical
PCD 9
Product Specification
37
IS 6393 : 1987
Specification for phenylacetamide (First Revision)
PCD 9
1
Product Specification
38
IS 6412 : 1971
Specification for benzoyl chloride, technical
PCD 9
Product Specification
39
IS 6515 : 1999
Sodium pentachlorophenate - Specification (First Revision)
PCD 9
1
Product Specification
40
IS 6712 : 2003
o - Dichlorobenzene - Specification (First Revision)
PCD 9
1
Product Specification
41
IS 6716 : 1981
Specification for benzoic acid, technical (First Revision)
PCD 9
1
Product Specification
42
IS 6718 : 1972
Specification for phenoxyacetic acid
PCD 9
Product Specification
43
IS 6768 : 1973
Specification for m - Aminophenol
PCD 26
Product Specification
44
IS 6775 : 1973
Specification for ethyl chloride, technical
PCD 9
Product Specification
45
IS 6971 : 1998
2 - Ethyl hexan - 1 - Ol - Specification (First Revision)
PCD 9
1
Product Specification
46
IS 6972 : 1973
Specification for benzotrichloride, technical
PCD 9
Product Specification
47
IS 7134 : 1973
Specification for diphenyl
PCD 9
Product Specification
48
IS 7135 : 1987
Specification for dimethyl sulphate, technical (First Revision)
PCD 9
1
Product Specification
49
IS 7220 : 1974
Specification for ethylenediaminetetra - Acetic acid, pure and technical
PCD 9
Product Specification
50
IS 7559 : 1992
Salicylic acid, technical - Specification (First Revision)
PCD 9
1
Product Specification
51
IS 7618 : 1974
Specification for hexachloroethane
PCD 9
Product Specification
52
IS 7619 : 1987
Specification for pentaerythritol (First Revision)
PCD 9
1
Product Specification
53
IS 7642 : 1975
Specification for 4 - Aminophenol
PCD 26
Product Specification
54
IS 7729 : 1975
Specification for sodium monochloroacetate
PCD 9
Product Specification
55
IS 7901 : 1975
Specification for triethanolamine, technical
PCD 9
Product Specification
56
IS 7910 : 2003
Monoethanolamine - Specification (First Revision)
PCD 9
1
Product Specification
57
IS 7911 : 2000
Diethanolamine - Specification (First Revision)
PCD 9
1
Product Specification
58
IS 7918 : 2001
Diethylene glycol - Specification (First Revision)
PCD 9
1
Product Specification
59
IS 8233 : 1987
Specification for phenyl peri acid, technical (First Revision)
PCD 26
1
Product Specification
60
IS 8278 : 1976
Specification for diphenylamine
PCD 9
Product Specification
61
IS 8796 : 1977
Specification for trimethylamine, technical
PCD 9
Product Specification
62
IS 8873 : 1977
Specification for monomethylamine, technical
PCD 9
Product Specification
63
IS 8874 : 1977
Specification for dimethylamine, technical
PCD 9
Product Specification
64
IS 9207 : 1979
Specification for Di - tet - butyl - para - cresol, tecnical
PCD 9
Product Specification
65
IS 9250 : 1979
Specification for p - Nitrophenol
PCD 9
Product Specification
66
IS 9850 : 2004
Methyl iso - Butyl ketone - Specification (First Revision)
PCD 9
1
Product Specification
67
IS 9986 : 1999
Benzaldehyde - Specification (First Revision)
PCD 9
1
Product Specification
68
IS 13322 : 1992
Furfural, technical - Specification
PCD 9
Product Specification
69
IS 14375 : 1996
Cyclohexanone - Specification
PCD 9
Product Specification
70
IS 14502 : 1998
n - Dibutyl ether - Specification
PCD 9
Product Specification
71
IS 14707 : 1999
Methyl acrylate - Specification
PCD 9
Product Specification
72
IS 14708 : 1999
Ethyl acrylate - Specification
PCD 9
Product Specification
73
IS 14709 : 1999
n - Butyl acrylate - Specification
PCD 9
Product Specification
74
IS 15356 : 2003
Acetaldehyde - Specification
PCD 9
Product Specification
75
IS 15773 : 2008
Sodium dichloroisocyanurate - Specification
PCD 9
Product Specification
76
IS 321 : 1964
Specification for absolute alcohol (First Revision)
PCD 9
Product Specification
77
IS 323 : 2009
Rectified spirit for industrial use - Specification (Second Revision)
PCD 9
2
Product Specification
78
IS 360 : 1964
Specification for amyl alcohol (First Revision)
PCD 9
Product Specification
79
IS 361 : 2009
Normal butyl alcohol, technical - Specification (Third Revision)
PCD 9
3
Product Specification
80
IS 1049 : 1962
Specification for Alcohol, Perfumery Grade
PCD 18
Product Specification
81
IS 9834 : 2004
Specification for iso - Butyl alcohol
PCD 9
Product Specification
82
IS 13359 : 1992
Polyethylene glycol 200 - Specification
PCD 9
Product Specification
83
IS 13475 : 1992
Sodium formate - Specification
PCD 9
Product Specification
84
IS 14310 : 1995
Glyoxal (40 percent solution) - Specification
PCD 9
Product Specification
85
IS 3229 : 2020
Naphthionic Acid ( Sodium Salt ) - Specification ( Third Revision )
PCD 26
3
Product Specification
86
IS 3242 : 1989
Oxynaphthoic acid (Bon Acid) - Specification (First Revision)
PCD 26
1
Product Specification
87
IS 4265 : 1975
4,4-Diaminostilbene-2,2-Disulphonic Acid(first revision)
PCD 26
1
Product Specification
88
IS 4334 : 1985
Specification for 2 - Chloroaniline (First Revision)
PCD 26
1
Product Specification
89
IS 4335 : 1985
Specification for 3 - Chloroaniline (First Revision)
PCD 26
1
Product Specification
90
IS 4336 : 1985
Specification for 4 - Chloroaniline (First Revision)
PCD 26
1
Product Specification
91
IS 4425 : 1967
Specification for p - Nitrotoluene o - Sulphonic acid
PCD 26
Product Specification
92
IS 4523 : 1989
Acetoacetanilide - Specification (First Revision)
PCD 26
1
Product Specification
93
IS 4524 : 1989
Acetoacet - O - Chloroanilide - Specification (First Revision)
PCD 26
1
Product Specification
94
IS 4525 : 1994
4-aminoacetanilide, technical - Specification (First Revision)
PCD 26
Product Specification
95
IS 4526 : 1976
Specification for 2, 5 - Dichloroaniline (First Revision)
PCD 26
1
Product Specification
96
IS 4527 : 1968
Specification for 2 - Nitro - 4 - Chlorotoluene
PCD 26
Product Specification
97
IS 4528 : 1977
4, 4-dinitrostilbene-2, 2-disulphonic Acid (Disodium Salt)(first revision)
PCD 26
1
Product Specification
98
IS 5042 : 1976
Specification for 1 - Aminoanthraquinone (First Revision)
PCD 26
1
Product Specification
99
IS 5043 : 1992
2 - Aminoanthraquinone - Specification (Second Revision)
PCD 26
2
Product Specification
100
IS 5044 : 1969
Specification for benzanthrone
PCD 26
Product Specification
101
IS 5045 : 1989
Dye intermediates - Metanilic acid, technical - Specification (Second Revision)
PCD 26
2
Product Specification
102
IS 5438 : 1977
Specification for nitrobenzene - 3 - Sulphonic acid, sodium salt (First Revision)
PCD 26
1
Product Specification
103
IS 5646 : 1970
Specification for p - Anisidine
PCD 26
Product Specification
104
IS 5647 : 2003
P - Toluidine - Specification (First Revision)
PCD 26
1
Product Specification
105
IS 5648 : 2003
O - Anisidine - Specification (First Revision)
PCD 26
1
Product Specification
106
IS 5649 : 2003
O - Toluidine - Specification (Second Revision)
PCD 26
2
Product Specification
107
IS 6258 : 2003
O - Nitroanisole - Specification (First Revision)
PCD 26
1
Product Specification
108
IS 6259 : 1971
Specification for anthraquinone, technical
PCD 26
Product Specification
109
IS 6260 : 1971
Specification for p - Nitroanisole
PCD 26
Product Specification
110
IS 6264 : 1994
J - acid, technical - Specification (First Revision)
PCD 26
1
Product Specification
111
IS 6265 : 1971
Specification for quinizarine, technical
PCD 26
Product Specification
112
IS 6266 : 1983
Specification for 1,4 - Diaminoanthraquinone, technical (First Revision)
PCD 26
1
Product Specification
113
IS 6962 : 1991
3,9 - Dibromobenzanthrone, technical - Specification (First Revision)
PCD 26
1
Product Specification
114
IS 6961 : 1984
Specification for 3 - Bromobenzanthrone (First Revision)
PCD 26
1
Product Specification
115
IS 6977 : 1973
Specification for 1,5 - Diaminoanthraquinone, technical
PCD 26
Product Specification
116
IS 7359 : 1992
1 - Chloroanthraquinone, technical specification (First Revision)
PCD 26
1
Product Specification
117
IS 7360 : 1992
1, 5 - Dichloroanthraquinone, technical - Specification (First Revision)
PCD 26
1
Product Specification
118
IS 7362 : 1986
Specification for tobias acid (First Revision)
PCD 26
1
Product Specification
119
IS 7364 : 1986
Specification for 3 - Nitro - 4 - Aminotoluene (First Revision)
PCD 26
1
Product Specification
120
IS 7635 : 1992
2 - Nitroaniline - Specification (Second Revision)
PCD 26
1
Product Specification
121
IS 7636 : 1992
4 - Chloro - 2 - Toluidine - Specification (Second Revision)
PCD 26
1
Product Specification
122
IS 7637 : 1992
5 - Chloro - 2 - Toluidine - Specification (First Revision)
PCD 26
1
Product Specification
123
IS 7641 : 1975
Specification for 4 - Chloro - 2 - Anisidine
PCD 26
Product Specification
124
IS 7643 : 2003
4 - Chloro - 2 - Nitroaniline - Specification (First Revision)
PCD 26
1
Product Specification
125
IS 7644 : 2003
3 - Nitroaniline - Specification (First Revision)
PCD 26
1
Product Specification
126
IS 101 : Part 2 : Sec 3 : 2015
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 3 determination of volatile organic compound (VOC) content - Difference method
CHD 20
Methods of tests
127
IS 1013 : 1972
Specification for triple superphosphate (First Revision)
FAD 7
1
Product Specification
128
IS 2409 : 2019
Calcium ammonium nitrate - Specification (Third Revision)
FAD 7
3
Product Specification
129
IS 5409 : Part 2 : 1985
Specification for agricultural liming materials as soil amendments: Part 2 limestone and dolomite (First Revision)
FAD 7
1
Product Specification
130
IS 7863 : 1975
Specification for fbrtilizer physical mixtures
FAD 7
Product Specification
131
IS 17054 : Part 1 : 2019
Surface active agents - Detergents - Determination of cationic - Active matter content: Part 1 high - Molecular - Mass cationic - Active matter
CHD 25
Methods of tests
132
IS 8558 : 1977
Specification for neem cake for manuring
FAD 7
Product Specification
133
IS 9024 : 1978
Specification for granulated fertilizer mixtures
FAD 7
Product Specification
134
IS 10170 : 1982
Specification for byproduct gypsum
FAD 7
Product Specification
135
IS 13921 : 1994
Chemed zinc (Zn - EDTA) agricultural grade - Specification
FAD 7
Product Specification
136
IS 13922 : 1994
Chelated iron (Fe - EDTA), agricultural grade - Specification
FAD 7
Product Specification
137
IS 14403 : 1996
Agriculture grade iron pyrites as soil amendment - Specification
FAD 7
Product Specification
138
IS 341 : 2016
Black japan, types a, b and c - Specification (Second Revision)
CHD 20
2
Product Specification
139
IS 2075 : 2017
Ready mixed paint, stoving, red oxide zinc chrome, priming - Specification (Third Revision)
CHD 20
3
Product Specification
140
IS 15848 : 2009
Zinc sulphate, monohydrate, agricultural grade - Specification
FAD 7
Product Specification
141
IS 15849 : 2009
Phosphate solubilizing fungal inoculants - Aspergillus awamori specification
FAD 7
Product Specification
142
IS 101 : Part 10 : Sec 2 : 2018
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 2 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Terms and definitions
CHD 20
Methods of tests
143
IS 101 : Part 10 : Sec 3 : 2018
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 3 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Collection of data
CHD 20
Methods of tests
144
IS 9755 : 2021
Textiles - High density polyethylene (HDPE)/polypropylene(pp)woven sacks for packing fertilizers - Specification (sixth revision)
TXD 23
6
Product Specification
145
IS 137 : 2017
Ready mixed paint, brushing, matt or eggshell flat, finishing, interior to indian standard colour as required - Specification (Second Revision)
CHD 20
2
Product Specification
146
IS 539 : 1974
Specification for naphthalene (Second Revision)
PCD 9
2
Product Specification
147
IS 540 : 1968
Specification for refined cresylic acid (First Revision)
PCD 9
1
Product Specification
148
IS 5592 : 1981
Specification for monochloroacetic acid (First Revision)
PCD 9
1
Product Specification
149
IS 7330 : 1988
Methods of sampling and test for ion - Exchange resins (First Revision)
PCD 9
1
Methods of tests
150
IS 14710 : 1999
Meta - Cresol - Specification
PCD 9
Product Specification
151
IS 16112 : 2013
Beta picoline - Specification
PCD 9
Product Specification
152
IS 16114 : 2013
3 - Cyanopyridine - Specification
PCD 9
Product Specification
153
IS 7646 : 1994
Benzoyl j - Acid, technical - Specification (First Revision)
PCD 26
1
Product Specification
154
IS 7647 : 2003
Acetoacet - 2 - Toluidide - Specification (First Revision)
PCD 26
1
Product Specification
155
IS 8059 : 1993
2 - Chloro - 5 - Aminotoluene - 4 - Sulphonic acid, technical - Specification (First Revision)
PCD 26
1
Product Specification
156
IS 8111 : 1986
Specification for N, N - Dimethylaniline (First Revision)
PCD 26
1
Product Specification
157
IS 8120 : 1989
Schaeffer's Acid (Sodium Salt), Technical - Specification (First Revision)
PCD 26
1
Product Specification
158
IS 8193 : 1976
Specification for 2 - Nitro chlorobenzene
PCD 26
Product Specification
159
IS 8194 : 1976
Specification for 3 - Nitro chlorobenzene
PCD 26
Product Specification
160
IS 8195 : 1976
Specification for 4 - Nitro chlorobenzene
PCD 26
Product Specification
161
IS 8196 : 1976
Specification for 2, 4 - Dinitrotoluene
PCD 26
Product Specification
162
IS 8232 : 1976
Specification for 2,6 - Diaminoanthraquinone, technical
PCD 26
Product Specification
163
IS 8397 : 1976
Specification for 2 - Nitrotoluene
PCD 26
Product Specification
164
IS 8398 : 1976
Specification for 3 - Nitrotoluene
PCD 26
Product Specification
165
IS 8399 : 1976
Specification for 1, 3 - Dinitrobenzene
PCD 26
Product Specification
166
IS 8400 : 1976
Specification for 2, 4 - Dinitro chlorobenzene
PCD 26
Product Specification
167
IS 14625 : 2015
Plastics Feeding Bottles (First Revision)
PCD 21
1
Product Specification
168
IS 8626 : 1987
Specification for r salt, technical (First Revision)
PCD 26
1
Product Specification
169
IS 8627 : 1986
Specification for gamma acid (First Revision)
PCD 26
1
Product Specification
170
IS 8634 : 1987
Specification for nitrodiazo acid (First Revision)
PCD 26
1
Product Specification
171
IS 8861 : 1978
Specification for 1, 4 - Dichloro - 2 - Nitrobenzene
PCD 26
Product Specification
172
IS 8878 : 1978
Specification for bromamine acid, technical
PCD 26
Product Specification
173
IS 8893 : 1978
Specification for 1-(3- Chlorophenyl) - 3 - Methyl - 5 - Pyrazolone
PCD 26
Product Specification
174
IS 9270 : 1979
Specification for 1, 4 - Diethoxy benzene
PCD 26
Product Specification
175
IS 9274 : 1979
Specification for β - Chloroethylamine hydrochloride solution
PCD 26
Product Specification
176
IS 9288 : 1979
Specification for cyanuric chloride
PCD 26
Product Specification
177
IS 11126 : 1984
Specification for 3 - Toluidine
PCD 26
Product Specification
178
IS 11176 : 1985
Specification for 3,3 -dichlorobenzidine Salts
PCD 26
Product Specification
179
IS 11177 : 1985
Specification for 4 - Nitro - 2 - Toluidine
PCD 26
Product Specification
180
IS 11181 : 1985
Specification for sulphotobias acid
PCD 26
Product Specification
181
IS 11540 : 1986
Specification for Michler's Ketone
PCD 26
Product Specification
182
IS 11557 : 1986
Specification for 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic acid, technical
PCD 26
Product Specification
183
IS 1867 : 2023
Rubber Hot Water Bottles � Specification ( Second Revision)
PCD 13
2
Product Specification
184
IS 4588 : 1986
Specification for rubber, raw, natural (Third Revision)
PCD 13
3
Product Specification
185
IS 4810 : 1968
Specification for Fumigation Sheets and Covers, Rubberized
TXD 33
Product Specification
186
IS 5192 : Part 1 : 1994
Natural rubber compounds specification: Part 1 for moulded products (Second Revision)
PCD 13
2
Product Specification
187
IS 5192 : Part 2 : 1994
Natural rubber compoundsspecification: Part 2 for extruded products (Second Revision)
PCD 13
2
Product Specification
188
IS 6713 : 2016
Rubber products - Guidelines for storage (Second Revision)
PCD 13
2
Code of Practice
189
IS 7069 : 2001
Benzothiazyl - 2 - Cyclohexyl sulphenamide (Cbs) - Specification (Second Revision)
PCD 13
2
Product Specification
190
IS 7351 : 1985
Specification for styrenated phenol (First Revision)
PCD 13
1
Product Specification
191
IS 8483 : 1989
Specification for dibenzothiazyl disulphide (First Revision)
PCD 13
1
Product Specification
192
IS 8851 : 1994
Sulphur for rubber industry - Specification (First Revision)
PCD 13
1
Product Specification
193
IS 9406 : 2024
CALCIUM SILICATE FOR RUBBER INDUSTRY — SPECIFICATION First Revision of IS 9406
PCD 13
1
Product Specification
194
IS 9407 : 1980
Specification for light magnesium oxide for rubber industry
PCD 13
Product Specification
195
IS 10357 : 1990
General purpose furnace [GPF (N - 660)] Carbon black - Specification (First Revision)
PCD 13
1
Product Specification
196
IS 10358 : 1991
Carbon black, super abrasion furnace [SAF (N - 110)] - Specification (First Revision)
PCD 13
1
Product Specification
197
IS 13978 : 1994
Zinc diethyl dithio carbamate (ZDEC) - Specification
PCD 13
Product Specification
198
IS 13981 : 1994
Benzothiazyl - N - Morpholinyl sulphenamide (MBS) - Specification
PCD 13
Product Specification
199
IS 14127 : 1995
Insoluble(Amorphous) sulphur for rubber industry - Specification
PCD 13
Product Specification
200
IS 14128 : 1994
N-(1,3 Dimethylbutyl)-N-Phenyl paraphenylenediamine (6PPD)- Specification
PCD 13
Product Specification
201
IS 867 : 1963
Methods of test for phenolic moulding materials (Revised)
PCD 27
Methods of tests
202
IS 1998 : 1962
Methods of test for thermosetting synthetic resin bonded laminated sheets
PCD 27
Methods of tests
203
IS 2221 : 1962
Methods of test for aminoplastic moulding materials
PCD 27
Methods of tests
204
IS 2530 : 1963
Methods of test for polyethylene moulding materials and polyethylene compounds
PCD 27
Methods of tests
205
IS 4669 : 1968
Methods of test for polyvinyl chloride resins
PCD 27
Methods of tests
206
IS 7188 : 1974
Methods of test for cellulose acetate flakes
PCD 27
Methods of tests
207
IS 7437 : 1974
Methods of sampling and test for vegetable adhesives
PCD 27
Methods of tests
208
IS 8402 : 1987
Methods of sampling and test for pressure sensitive adhesive tapes (First Revision)
PCD 27
1
Methods of tests
209
IS 8543 : Part 1 : Sec 1 : 1978
Methods of testing plastics: Part 1 characterization of polymer structure and size section 1 determination of molecular mass from viscosity
PCD 27
Methods of tests
210
IS 8543 : Part 13 : Sec 1 : 1977
Methods of testing plastics: Part 13 tests for specific products section 1 buttons (Thermosetting)
PCD 27
Methods of tests
211
IS 9845 : 1998
Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision)
PCD 27
2
Methods of tests
212
IS 11022 : 1984
Methods of sampling and test for glues (bone, skin/fleshings and fish glues)
PCD 27
Methods of tests
213
IS 13360 : Part 1 : 1992
Plastics - Methods of testing: Part 1 introduction
PCD 27
Methods of tests
214
IS 13360 : Part 2 : Sec 1 : 2016
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 1 plastics - Compression moulding of test specimens of thermoplastic materials (First Revision)
PCD 27
1
Methods of tests
215
IS 13360 : Part 2 : Sec 2 : 2013
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 2 compression moulding of test specimens of thermosetting materials (First Revision)
PCD 27
1
Methods of tests
216
IS 13360 : Part 2 : Sec 3 : 2019
Plastics ? Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 3 Injection moulding of test specimens of thermoplastic materials - General principles and moulding of multipurpose and bar test specimens ( First Revision )
PCD 27
1
Methods of tests
217
IS 13360 : Part 2 : Sec 10 : 2006
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 10 injection moulding of test specimens of thermosetting powder moulding compounds (Pmcs) - General principles and moulding of multipurpose test specimens
PCD 27
Methods of tests
218
IS 13360 : Part 2 : Sec 11 : 2006
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 11 injection moulding offest specimens of thermosetting powder moulding compounds (Pmcs) - Small plates
PCD 27
Methods of tests
219
IS 13360 : Part 3 : Sec 2 : 1997
Plastics - Methods of testing: Part 3 physical and dimensional properties section 2 determination of apparent density of material that can be poured from a specified funnel
PCD 27
Methods of tests
220
IS 13360 : Part 3 : Sec 3 : 1997
Plastics - Methods of testing: Part 3 physical and dimensional properties section 3 determination of apparent density of moulding material that cannot be poured from a specified funnel
PCD 27
Methods of tests
221
IS 13360 : Part 3 : Sec 4 : 1995
Plastics - Methods of testing: Part 3 physical and dimensional properties section 4 determination of bulk factor of moulding materials
PCD 27
Methods of tests
222
IS 13360 : Part 3 : Sec 5 : 2013
Plastics - Methods of testing: Part 3 physical and dimensional properties section 5 thermosetting moulding materials - Determination of shrinkage (First Revision)
PCD 27
1
Methods of tests
223
IS 13360 : Part 3 : Sec 6 : 2000
Plastics - Methods of testing: Part 3 physical and dimensional properties section 6 film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll by gravimetric techniques (Gravimetric Thickness)
PCD 27
Methods of tests
224
IS 13360 : Part 3 : Sec 7 : 1999
Plastics - Methods of testing: Part 3 physical and dimensional properties section 7 liquid resins - Determination of density by the pyknometer method
PCD 27
Methods of tests
225
IS 13360 : Part 3 : Sec 9 : 1999
Plastics - Methods of testing: Part 3 physical and dimensional properties section 9 determination of moisture in plastics by coulometric regeneration of phosphorus pentoxide
PCD 27
Methods of tests
226
IS 13360 : Part 4 : Sec 2 : 1999
Plastics - Methods of testing: Part 4 theological properties section 2 cup flow of phenolic and alkyd moulding materials
PCD 27
Methods of tests
227
IS 13360 : Part 4 : Sec 3 : 2004
Plastics - Methods of testing: Part 4 rhelogical properties section 3 determination of spiral flow of low - Pressure thermosetting moulding compounds
PCD 27
Methods of tests
228
IS 13360 : Part 4 : Sec 4 : 1999
Plastics - Methods of testing: Part 4 rheological properties section 4 determination of properties of polymeric materials by means of a capillary rheometer
PCD 27
Methods of tests
229
IS 13360 : Part 5 : Sec 5 : 2017
Plastics - Methods of testing: Part 5 mechanical properties section 5 determination of charpy impact properties - Non - Instrumented impact test (First Revision)
PCD 27
1
Methods of tests
230
IS 13360 : Part 5 : Sec 6 : 1999
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of impact resistance by the free - Falling dart method - Staircase methods
PCD 27
Methods of tests
231
IS 13360 : Part 5 : Sec 8 : 2013
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of compressive properties (First Revision)
PCD 27
Methods of tests
232
IS 13360 : Part 5 : Sec 10 : 2018
Plastics - Methods of testing: Part 5 mechanical properties section 10 determination of tear resistance of plastics films and sheeting - Trouser tear method (First Revision)
PCD 27
1
Methods of tests
233
IS 1012 : 2002
Turbine lubricating oils - Specification (Third Revision)
PCD 25
3
Product Specification
234
IS 1758 : 1986
Specification for jute batching oil (Second Revision)
PCD 25
2
Product Specification
235
IS 13360 : Part 4 : Sec 1 : 2000
Plastics - Methods of testing: Part 4 rheological properties section 1 determination of the melt mass - Flow rate (Mfj3)And the melt volume - Flow rate (Mvr) of thermoplastics (First Revision)
PCD 27
1
Methods of tests
236
IS 13360 : Part 5 : Sec 11 : 2013
Plastics - Methods of testing: Part 5 mechanical properties section 11 determination of indentation hardness by means of durometer (Shore Hardness) (First Revision)
PCD 27
1
Methods of tests
237
IS 13360 : Part 5 : Sec 13 : 1992
Plastics - Methods of testing: Part 5 mechanical properties section 13 determination of rockwell hardness
PCD 27
Methods of tests
238
IS 13360 : Part 5 : Sec 19 : 1999
Plastics - Methods of testing: Part 5 mechanical properties section 19 determination of resistance of plastic materials to abrasion
PCD 27
Methods of tests
239
IS 13360 : Part 5 : Sec 22 : 2017
Plastics - Methods of testing: Part 5 mechanical properties section 22 determination of resistance to wear by abrasive wheels (First Revision)
PCD 27
1
Methods of tests
240
IS 13360 : Part 5 : Sec 23 : 1996
Plastics - Methods of testing: Part 5 mechanical properties section 23 determination of tear resistance of plastics film and sheeting - Elmendorf method
PCD 27
Methods of tests
241
IS 13360 : Part 5 : Sec 24 : 1999
Plastics - Methods of testing: Part 5 mechanical properties section 24 determination of impact resistance by the free - Failing dart method - Instrumented punctureTest
PCD 27
Methods of tests
242
IS 13360 : Part 5 : Sec 25 : 2004
Plastics - Methods of testing: Part 5 mechanical properties section 25 determination of tensile properties - Test conditions for isotropic and orthotropic fibre - Reinforced plastic composites
PCD 27
Methods of tests
243
IS 6552 : 1987
Specification for straight mineral high demulsibility oils (First Revision)
PCD 25
1
Product Specification
244
IS 13360 : Part 6 : Sec 6 : 2019
Plastics ? Methods of Testing Part 6 Thermal Properties Section 6 Flammability by oxygen index ? General requirements ( Second Revision )
PCD 27
2
Methods of tests
245
IS 13360 : Part 6 : Sec 9 : 2001
Plastics - Methods of testing: Part 6 thermal properties section 9 determination of density of smoke from the burning or decomposition of plastics
PCD 27
Methods of tests
246
IS 13360 : Part 6 : Sec 11 : 2004
Plastics - Methods of testing: Part 6 thermal properties section 11 determination of the brittleness temperature by impact
PCD 27
Methods of tests
247
IS 13360 : Part 6 : Sec 14 : 2004
Plastics - Methods of testing: Part 6 thermal properties section 14 standard test method for coefficient of linear thermal expansion of plastics between - 30°C and 30°C with a vitreous silica dilatometer
PCD 27
Methods of tests
248
IS 13360 : Part 6 : Sec 19 : 2019
Plastics ? Methods of Testing Part 6 Thermal Properties Section 19 Flammability by oxygen index ? Ambient temperature test ( First Revision )
PCD 27
1
Methods of tests
249
IS 13360 : Part 6 : Sec 20 : 2019
Plastics ? Methods of Testing Part 6 Thermal Properties Section 20 Flammability by oxygen index ? Elevated temperature test ( First Revision )
PCD 27
1
Methods of tests
250
IS 13360 : Part 6 : Sec 22 : 2006
Plastics - Methods of testing: Part 6 thermal properties section 22 determination of time - Temperature limits after prolonged exposure to heat
PCD 27
Methods of tests
251
IS 13360 : Part 8 : Sec 3 : 2018
Plastics - Methods of testing: Part 8 permanence / chemical properties section 3 determination of the effects of the immersion in liquid chemicals (First Revision)
PCD 27
1
Methods of tests
252
IS 13360 : Part 8 : Sec 4 : 2018
Plastics - Methods of testing: Part 8 permanece/chemical properties section 4 determination of loss of plasticizers - Activated carbon method (First Revision)
PCD 27
1
Methods of tests
253
IS 13360 : Part 8 : Sec 5 : 2019
Plastics — Methods of testing Part 8 Permanence / Chemical Properties Section 5 Determination of migration of plasticizers ( First Revision )
PCD 27
1
Methods of tests
254
IS 13360 : Part 8 : Sec 6 : 1997
Plastics - Methods of testing: Part 8 permanence/chemical properties section 6 determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method
PCD 27
Methods of tests
255
IS 13360 : Part 9 : Sec 1 : 2004
Plastics - Methods of testing: Part 9 optical properties section 1 determination of refractive index
PCD 27
Methods of tests
256
IS 13360 : Part 9 : Sec 5 : 1999
Plastics - Methods of testing: Part 9 optical properties section 5 determination of haze and luminous transmittance of transparent plastics
PCD 27
Methods of tests
257
IS 13360 : Part 9 : Sec 9 : 2001
Plastics - Methods of testing: Part 9 optical properties section 9 determination of yellow index of plastics
PCD 27
Methods of tests
258
IS 13360 : Part 10 : Sec 4 : 2001
Plastics - Methods of testing: Part 10 thermosetting properties section 4 determination of gel time and peak exothermic temperature of reacting thermosetting resins
PCD 27
Methods of tests
259
IS 13360 : Part 10 : Sec 7 : 2004
Plastics - Methods of testing: Part 10 resin (ThermosettlNg Properties) section 7 phenol - Formaldehyde mouldings - Determination of acetone - Soluble matter (Apparent Resin Content Of Material In The Unmoulded State)
PCD 27
Methods of tests
260
IS 13360 : Part 11 : Sec 1 : 1999
Plastics - Methods of testing part 11 special properties se&on 1 film and sheeting - Determination of coefficients of friction
PCD 27
Methods of tests
261
IS 13360 : Part 11 : Sec 4 : 1999
Plastics - Methods of testing: Part 11 special properties section 4 determination of gel count of plastics film
PCD 27
Methods of tests
262
IS 13360 : Part 11 : Sec 5 : 2001
Plastics - Methods of testing: Part 11 special properties - Section 5 determination of white point temperature and minimum film - Forming temperature
PCD 27
Methods of tests
263
IS 13360 : Part 11 : Sec 13 : 2006
Plastics - Methods of testing: Part 11 special properties section 13 film and sheeting - Determination of cold - Crack temperature
PCD 27
Methods of tests
264
IS 13360 : Part 11 : Sec 14 : 2006
Plastics - Methods of: Part 11 special properties testing section 14 film and sheeting - Determination of dimensional change on heating
PCD 27
Methods of tests
265
IS 13360 : Part 5 : Sec 12 : 2017
Plastics - Methods of testing: Part 5 mechanical properties section 12 determination of hardness - Ball indentation method (First Revision)
PCD 27
1
Methods of tests
266
IS 13360 : Part 10 : Sec 5 : 2004
Plastics - Methods of testing: Part 10 resin (Thermoseiting Properties) section 5 phenol - Formaldehyde mouldings - Determination of free phenols - Iodometric method
PCD 27
Methods of tests
267
IS 13360 : Part 10 : Sec 6 : 2004
Plastics - Methods of testing: Part 10 resin (Thermosetting Properties) section 6 phenol - Formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Calorimetric comparison method
PCD 27
Methods of tests
268
IS 6312 : 1994
Polyethylene containers for the transport of materials - Specification (Second Revision)
PCD 21
2
Product Specification
269
IS 7019 : 1998
Glossary of terms in plastics and flexible packaging, excluding paper (Second Revision)
PCD 21
2
Terminology
270
IS/ISO 14853 : 2016
Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
PCD 27
1
Methods of tests
271
IS/ISO 20200 : 2015
Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory - Scale test (First Revision)
PCD 27
1
Methods of tests
272
IS 13360 : Part 5 : Sec 14 : 2001
Plastics - Methods of testing: Part 5 mechanical properties section 14 determination of indentation hardness of rigid plastic by means of barcol impressor
PCD 27
Methods of tests
273
IS 7408 : Part 1 : 2000
Blow moulded polyolefin containers - Specification: Part 1 : up to 5 litres capacity (Second Revision)
PCD 21
2
Product Specification
274
IS 7408 : Part 2 : 2000
Blow moulded polyolefin containers - Specification: Part 2 : over 5 litres, up to and including 60 litres capacity (First Revision)
PCD 21
1
Product Specification
275
IS 7408 : Part 3 : 2000
Blow moulded polyolefin containers - Specification: Part 3 : closed head containers over 60 litres, up to and including 250 litres capacity (First Revision)
PCD 21
1
Product Specification
276
IS 7803 : Part 1 : 1975
Specification for plastic containers for pharmaceutical use - Part 1 : other than parenteral and ophthalmic preparations
PCD 21
Product Specification
277
IS 7803 : Part 2 : 1975
Specification for plastic containers for pharmaceutical use - Part II : parenteral and ophthalmic preparations
PCD 21
Product Specification
278
IS 8747 : 1977
Methods of test for environmental stress - crack resistance of blow - Moulded polyethylene containers
PCD 21
Methods of tests
279
IS 9754 : 1981
Specification for high density polyethylene containers for packing of liquid pesticides (Up To 1 Litre Capacity)
PCD 21
Product Specification
280
IS 11584 : 1986
Specification for high density polyethylene (HDPE) crates for milk satchets
PCD 21
Product Specification
281
IS 11805 : 2007
Polyethylene pouches for packaging liquid milk - Specification (Second Revision)
PCD 21
2
Product Specification
282
IS 12007 : 1987
Specification for laminated collapsible tubes
PCD 21
Product Specification
283
IS 12395 : 1988
Specification for disposable trash bags of plastics
PCD 21
Product Specification
284
IS 12512 : 1989
HDPE containers - For liquid pesticides - Capacity over 1 and up to 5 litres - Specification
PCD 21
Product Specification
285
IS 12887 : 1989
Polyethylene terephthalate (PET) bottles for packaging of edible oils - Specification
PCD 21
Product Specification
286
IS 12883 : 1989
Polyvinyl chloride (PVC) bottles for edible oils - Specification
PCD 21
Product Specification
287
IS 13123 : 2000
Packing of liquid pesticides - Polyethylene terephthalate (PET) bottles (Up To 5 Litres Capacity) - Specification (First Revision)
PCD 21
1
Product Specification
288
IS 14129 : 1994
Flexible packaging materials for the packing of vanaspati in 10 kg and 15 kg packs - Specificaiton
PCD 21
Product Specification
289
IS 14537 : 1998
Polyethylene terephthalate (PET) bottles for packaging of alcoholic liquors - Specification
PCD 21
Product Specification
290
IS 14636 : 1998
Flexible packaging materials for packaging of edible oils, ghee and vanaspati
PCD 21
Product Specification
291
IS 14764 : 2000
Polyethylene terephthalate (PET) containers for packaging of vanaspati - specification
PCD 21
Product Specification
292
IS 15473 : 2004
Blow moulded HDPE containers for packaging of edible oils - Specification
PCD 21
Product Specification
293
IS 15532 : 2004
Plastics crates for fruits and vegetables - Specification
PCD 21
Product Specification
294
IS 15749 : 2007
Fluorinated HDPE bottles and containers - Specification
PCD 21
Product Specification
295
IS 8694 : 1978
Specification for latex bladders, seamless, valve type
PGD 41
Product Specification
296
IS 10171 : 1999
Guide on suitability of plastics for food packaging (Second Revision)
PCD 21
2
Code of Practice
297
IS 13360 : Part 5 : Sec 2 : 2017
Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision)
PCD 27
1
Methods of tests
298
IS 13360 : Part 6 : Sec 18 : 2013
Plastics - Methods of testing: Part 6 thermal properties section 18 determination of temperature of deflection under load - High - Strength thermosetting laminates and long - Fibre - Reinforced plastics (First Revision)
PCD 27
1
Methods of tests
299
IS 13360 : Part 6 : Sec 23 : 2006
Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source
PCD 27
Methods of tests
300
IS 13360 : Part 11 : Sec 11 : 1999
Plastics - Methods of testing: Part 11 special properties section 11 polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate
PCD 27
Methods of tests
301
IS 6749 : 1972
Glossary of terms relating to alcohol (ethyl) industry and trade
PCD 9
Terminology
302
IS 2302 : 1989
Tables for alcoholometry by hydrometer method (First Revision)
PCD 9
1
Others
303
IS 3506 : 1989
Tables for alcoholometry (pyknometer method) (First Revision)
PCD 9
1
Others
304
IS 5860 : 1970
Table and inter - Conversion charts for ethanol - Water mixtures
PCD 9
Others
305
IS 5299 : 2001
Methods of sampling and tests for dye intermediates (First Revision)
PCD 26
1
Methods of tests
306
IS 2978 : 2024
By-Products of Lac — Specification (Second Revision)
CHD 23
2
Product Specification
307
IS 3015 : 2024
Brush, Scrubbing — Specification (Second Revision)
CHD 23
2
Product Specification
308
IS 265 : 2021
HYDROCHLORIC ACID SPECIFICATION Fifth Revision
CHD 1
5
Product Specification
309
IS 646 : 2020
Liquid Chlorine, Technical ? Specification ( Third Revision )
CHD 1
3
Product Specification
310
IS 17402 : 2021
Cupric Oxide for Explosives and Pyrotechnic Composition - Specification
CHD 26
Product Specification
311
IS 1375 : 2021
Indian Standard FOR BLACK LEAD PENCILS SPECIFICATION Second Revision of IS 1375
CHD 14
2
Product Specification
312
IS 8075 : 2021
BACK COATED CARBON PAPERS FOR TYPEWRITER SPECIFICATION First Revision
CHD 14
1
Product Specification
313
IS 11657 : 2020
PHOSPHORUS OXYCHLORIDE TECHNICAL SPECIFICATION First Revision
CHD 1
1
Product Specification
314
IS 4955 : 2020
Household Laundry Detergent Powders — Specification ( Fifth Revision )
CHD 25
5
Product Specification
315
IS 4956 : 2020
Synthetic Detergents for Industrial Purposes — Specification ( Third Revision )
CHD 25
3
Product Specification
316
IS 9873 : Part 8 : 2019
Safety of toys: Part 8 age determination guidelines
PCD 30
Safety Standard
317
IS 9458 : 2020
Synthetic Detergents for Washing Woollen and Silk Fabrics — Specification ( Second Revision )
CHD 25
2
Product Specification
318
IS 4200 : 2020
Sodium Aluminate — Specification ( Second Revision )
CHD 1
2
Product Specification
319
IS 11479 : Part 2 : 2020
Antibacterial Toilet Soap — Specification Part 2 Liquid ( Second Revision )
CHD 25
2
Product Specification
320
IS 13760 : 2024
Toilet Cleaner, Acid-Based, Powder — Specification (First Revision)
CHD 25
1
Product Specification
321
IS 10821 : 1984
Specification for calcium nitrate for explosive industry
CHD 26
Product Specification
322
IS 1091 : 1985
Specification for Nitrocellulose
CHD 26
3
Product Specification
323
IS 10977 : 1984
Specification for pentarythritol for explosive industry
CHD 26
Product Specification
324
IS 11491 : 1985
Specification for blasting soluble nitrocellulose for explosives industry
CHD 26
Product Specification
325
IS 11783 : 1986
Specification for ferrosilicon for explosive and pyrotechnic industry
CHD 26
Product Specification
326
IS 11803 : 1986
Specification for magnesium oxide for explosive ammunition protective compositions and pyrotechnic industry
CHD 26
Product Specification
327
IS 12276 : 1988
Specification for dextrin for explosive and pyrotechnic industry
CHD 26
Product Specification
328
IS 12437 : 1988
Specification for zirconium powder for use in explosive and pyrotechnic industry
CHD 26
Product Specification
329
IS 12684 : 1989
Calcium stearate for explosives and - Pyrotechnic industry - Specification
CHD 26
Product Specification
330
IS 13522 : 1992
Charcoal for explosives and pyrotechnic compositions - Specification
CHD 26
Product Specification
331
IS 13524 : 1992
Potassium Perchlorate for Explosives and Pyrotechnic Compositions specification
CHD 26
Product Specification
332
IS 13526 : 1992
Sodium perchlorate solution for explosives and pyrotechnic compositions - Specification
CHD 26
Product Specification
333
IS 2012 : 2006
Red phosphorus - Specification (First Revision)
CHD 26
1
Product Specification
334
IS 2307 : 2004
Magnesium powder for explosive and pyrotechnic compositions - Specification (Second Revision)
CHD 26
2
Product Specification
335
IS 301 : 1982
Specification for potassium nitrate for explosive and pyrotechnic compositions (Second Revision)
CHD 26
2
Product Specification
336
IS 438 : 2006
Aluminium powder for explosives and pyrotechnic compositions - Specification (Second Revision)
CHD 26
2
Product Specification
337
IS 4396 : 1981
Specification for barium nitrate for explosive and pyrotechnic compositions (First Revision)
CHD 26
1
Product Specification
338
IS 4668 : 1985
Specification for ammonium nitrate for explosives (First Revision)
CHD 26
1
Product Specification
339
IS 5670 : 1984
Specification for lead thiocyanate for explosive and pyrotechnic compositions (First Revision)
CHD 26
1
Product Specification
340
IS 5671 : 1984
Specification for strontium nitrate for pyrotechnic compositions (First Revision)
CHD 26
1
Product Specification
341
IS 5713 : 1981
Specification for manganese dioxide for explosive and pyrotechnic compositions (First Revision)
CHD 26
1
Product Specification
342
IS 5731 : 1970
Specification for antimony sulphide for explosive and pyrotechnic compositions
CHD 26
Product Specification
343
IS 708 : 1987
Specification for potassium chlorate for explosive and pyrotechnic industry (Second Revision)
CHD 26
2
Product Specification
344
IS 7401 : 1987
Specification for paraffin wax for explosive and pyrotechnic industry (First Revision)
CHD 26
1
Product Specification
345
IS 7588 : 1992
Barytes for explosives and pyrotechnic compositions - Specification (First Revision)
CHD 26
1
Product Specification
346
IS 7602 : 1975
Specification for lead chromate for explosive and pyrotechnic compositions
CHD 26
Product Specification
347
IS 7633 : 1982
Specification for calcium carbonate for explosive and pyrotechnic industry (First Revision)
CHD 26
1
Product Specification
348
IS 8063 : 1976
Specification for red lead for explosive and pyrotechnic industry
CHD 26
Product Specification
349
IS 12084 : 2018
Morpholine - Specification (First Revision)
CHD 13
1
Product Specification
350
IS 1069 : 2021
QUALITY TOLERANCES FOR WATER FOR STORAGE BATTERIES - SPECIFICATION
CHD 13
3
Product Specification
351
IS 12085 : 2020
Cyclohexylamine for Boiler Water Treatment - Specification ( First Revision )
CHD 13
1
Product Specification
352
IS 12086 : 2020
Hydrazine Hydrate - Specification ( First Revision )
CHD 13
1
Product Specification
353
IS 13024 : 2013
Syntans for prevention of sludge formation in vegetable tan liquor - Specification (First Revision)
CHD 17
1
Product Specification
354
IS 6301 : 2013
Basic chromium sulphate (For Tanning) - Specification (First Revision)
CHD 17
1
Product Specification
355
IS 6199 : 2013
Wattle extract - Specification (First Revision)
CHD 17
1
Product Specification
356
IS 13528 : 2013
Pretanning syntans - Specification (First Revision)
CHD 17
1
Product Specification
357
IS 13625 : 2013
Retanning syntans including acrylic and related syntans - Specification (First Revision)
CHD 17
1
Product Specification
358
IS 6657 : 2013
Sal bark - Specification (First Revision)
CHD 17
1
Product Specification
359
IS 6658 : 2013
Cashew testa - Specification (First Revision)
CHD 17
1
Product Specification
360
IS 13606 : 2013
Synthetic sulphochlorinated fatliquors for leather processing - Specification (First Revision)
CHD 17
1
Product Specification
361
IS 14488 : 2013
Sulphited fatliquors for leather - Specification (First Revision)
CHD 17
1
Product Specification
362
IS 3969 : 2013
Goran bark - Specification (Second Revision)
CHD 17
2
Product Specification
363
IS 7742 : 2013
Synthetic emulsion resin binders - Specification (First Revision)
CHD 17
1
Product Specification
364
IS 5128 : 2013
Avaram bark - Specification (First Revision)
CHD 17
1
Product Specification
365
IS 5465 : 2013
Sonali bark - Specification (First Revision)
CHD 17
1
Product Specification
366
IS 10286 : 2013
BLEACHING SYNTANS — SPECIFICATION
CHD 17
3
Product Specification
367
IS 11987 : 2013
Wax - Emulsion for leather finishing - Specification (First Revision)
CHD 17
1
Product Specification
368
IS 13527 : 2013
Replacement syntans - Specification (First Revision)
CHD 17
1
Product Specification
369
IS 13023 : 1991
Enzyme bates (Acidic) - Specification
CHD 17
Product Specification
370
IS 13022 : 1991
Enzyme bates (Alkaline) - specification
CHD 17
Product Specification
371
IS 2716 : 2013
Myrobalan extract - Specification (Second Revision)
CHD 17
2
Product Specification
372
IS 3967 : 2013
Cutch - Specification (Second Revision)
CHD 17
2
Product Specification
373
IS 11744 : 2020
Phosphorous Pentachloride, Technical - Specification ( First Revision )
CHD 1
1
Product Specification
374
IS 3968 : 2013
Wattle bark - Specification (First Revision)
CHD 17
1
Product Specification
375
IS 3999 : 2015
Casein based aqueous pigments and finishes - Specification (First Revision)
CHD 17
1
Product Specification
376
IS 5127 : 2013
Babul bark - Specification (First Revision)
CHD 17
1
Product Specification
377
IS 6357 : 2013
Sulphated oil for leather fatliquoring - Specification (First Revision)
CHD 17
1
Product Specification
378
IS 8601 : 2013
Myrobalan nuts (Whole And Crushed) for tanning industry - Specification (First Revision)
CHD 17
1
Product Specification
379
IS 9004 : 2013
Tamarind seed testa - Specification (First Revision)
CHD 17
1
Product Specification
380
IS 4441 : 1980
Code of practice for use of silicate type chemical resistant mortars (First Revision)
CED 5
1
Code of Practice
381
IS 294 : 2018
Single superphosphate - Specification (Third Revision)
FAD 7
3
Product Specification
382
IS 1060 : Part 2 : 1960
Methods of sampling and test for paper and allied products: Part 2
CHD 15
Methods of tests
383
IS 1060 : Part 3 : 1969
Methods of sampling and test for paper and allied products: Part 3
CHD 15
Methods of tests
384
IS 12765 : 2021
PRINTING PAPER MAP - SPECIFICATION FIRST REVISION OF IS 12765
CHD 15
1
Product Specification
385
IS 1397 : 2020
Kraft Paper for Packing and Wrapping — Specification ( Third Revision )
CHD 16
3
Product Specification
386
IS 3562 : 1997
P - Nitrotoluene, technical - Specification (First Revision)
PCD 26
Product Specification
387
IS 6613 : 2002
Neutral spirit for alcoholic drinks - Specification (First Revision)
FAD 29
1
Product Specification
388
IS 4658 : 2019
Specification for coated paper and board (Art And Chromo) (Second Revision)
CHD 15
2
Product Specification
389
IS 10666 : 2018
Tobacco and tobacco products - Cigarette filters - Specification (Second Revision)
FAD 4
2
Product Specification
390
IS 101 : Part 1 : Sec 3 : 1986
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 3 preparation of panels
CHD 20
3
Methods of tests
391
IS 101 : Part 1 : Sec 4 : 1987
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 4 brushing test (Third Revision)
CHD 20
3
Methods of tests
392
IS 101 : Part 1 : Sec 5 : 2024
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 5 consistency (Third Revision)
CHD 20
4
Methods of tests
393
IS 101 : Part 1 : Sec 6 : 1987
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 6 flash point (Third Revision)
CHD 20
3
Methods of tests
394
IS 101 : Part 1 : Sec 7 : 2020
Methods of sampling and test for paints, varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 7 mass per 10 litres - determination of density - pycnometer method (Fourth Revision)
CHD 20
4
Methods of tests
395
IS 11883 : 2017
Ready mixed paint, brushing, red oxide, priming for metals specification (First Revision)
CHD 20
1
Product Specification
396
IS 13213 : 2018
Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)
CHD 20
1
Product Specification
397
IS 16361 : 2015
Thermoplastic polymer based coatings: (A) undercoating (B) finishing - Specification
CHD 20
Product Specification
398
IS 101 : Part 2 : Sec 2 : 1986
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 2 volatile matter (Third Revision)
CHD 20
3
Methods of tests
399
IS 101 : Part 3 : Sec 1 : 1986
Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 1 drying time (Third Revision)
CHD 20
3
Methods of tests
400
IS 101 : Part 3 : Sec 2 : 1989
Methods of sampling and tes for paints,varnishes and related products: Part 3 tests on paint film formation: Sec 2 film thickness (Third Revision)
CHD 20
3
Methods of tests
401
IS 101 : Part 3 : Sec 4 : 1987
Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 4 finish (Third Revision)
CHD 20
3
Methods of tests
402
IS 101 : Part 3 : Sec 5 : 2022
Method of sampling and test of paints varnishes and related products Part 3 Test on paint film formation Section 5 Determination of fineness of grind Fifth Revision
CHD 20
5
Methods of tests
403
IS 101 : Part 4 : Sec 1 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 4 optical test: Sec 1 opacity (Third Revision)
CHD 20
3
Methods of tests
404
IS 101 : Part 4 : Sec 2 : 2021
Methods of sampling and test for paints varnishes and related products: Part 4 Optical tests: Sec 2 Colour-visual comparison of colour of paints (Fourth Revision )
CHD 20
4
Methods of tests
405
IS 101 : Part 4 : Sec 4 : 2020
Methods of Sampling and Test for Paints, Varnishes and Related Products : Part 4 optical test : Sec 4 gloss - determination of gloss value at 20�, 60� and 85� ( Fourth Revision )
CHD 20
4
Methods of tests
406
IS 101 : Part 5 : Sec 1 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical test on paint films: Sec 1 hardness tests (Third Revision)
CHD 20
3
Methods of tests
407
IS 101 : Part 5 : Sec 2 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 2 flexibility and adhesion (Third Revision)
CHD 20
3
Methods of tests
408
IS 101 : Part 5 : Sec 3 : 2019
Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 3 impact resistance - falling - weight test, large - Area indenter (Fifth Revision)
CHD 20
5
Methods of tests
409
IS 101 : Part 5 : Sec 4 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 4 Print free test (Third Revision)
CHD 20
3
Methods of tests
410
IS 101 : Part 6 : Sec 1 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests: Sec 1 resistance to humidity under conditions of condensation (Third Revision)
CHD 20
3
Methods of tests
411
IS 101 : Part 6 : Sec 2 : 1989
Methods of sampling and test for varnishes and related products: Part 6 durability test on paint films: Sec 2 keeping properties (Third Revision)
CHD 20
3
Methods of tests
412
IS 101 : Part 6 : Sec 3 : 1990
Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests on paint films: Sec 3 moisture vapour permeability (Third Revision)
CHD 20
3
Methods of tests
413
IS 101 : Part 6 : Sec 4 : 1991
Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests on paint films: Sec 4 degradation of coatings (pictorial aids for evaluation) (Third Revision)
CHD 20
Methods of tests
414
IS 101 : Part 6 : Sec 5 : 1997
Method of sampling and test for paints, varnishes and related products: Part 6 durability test on Paint films: Sec 5 accelerated weathering test
CHD 20
Methods of tests
415
IS 101 : Part 7 : Sec 1 : 1989
Methodsof sampling and test for paints, varnishes and related produdTs: Part 7 environmental tests on paint films: Sec 1 resistance to water (Third Revision)
CHD 20
3
Methods of tests
416
IS 101 : Part 7 : Sec 2 : 1990
Methods of sampling and test for paints,varnishes and related products: Part 7 environmental tests on paint films: Sec 2 resistance to liquids (Third Revision)
CHD 20
3
Methods of tests
417
IS 101 : Part 7 : Sec 3 : 2020
Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 3 determination of the effect of heat ( Fourth Revision )
CHD 20
4
Methods of tests
418
IS 101 : Part 7 : Sec 4 : 1990
Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 4 resistance to bleeding of pigments (Third Revision)
CHD 20
3
Methods of tests
419
IS 101 : Part 8 : Sec 1 : 1989
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 1 residue on sieve (Third Revision)
CHD 20
3
Methods of tests
420
IS 101 : Part 8 : Sec 2 : 1990
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 2 pigments and non - volatile matter (Third Revision)
CHD 20
3
Methods of tests
421
IS 101 : Part 8 : Sec 3 : 1993
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 3 ash content (Third Revision)
CHD 20
Methods of tests
422
IS 101 : Part 8 : Sec 4 : 2015
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 4 phthalic anhydride (Fourth Revision)
CHD 20
4
Methods of tests
423
IS 101 : Part 8 : Sec 6 : 1993
Methods of sampling and test for paints,varnishes and related products: Part 8 tests for pigments and other solids: Sec 6 volume solids
CHD 20
Methods of tests
424
IS 101 : Part 9 : Sec 1 : 1993
Methods of sampling and test for paints, varnishes and related products: Part 9 tests for lacquers and varnish: Sec 1 acid value (Third Revision)
CHD 20
3
Methods of tests
425
IS 101 : Part 9 : Sec 2 : 1993
Methods of sampling and test for paints, varnishes and products: Part 9 tests for lacquers and varnish: Sec 2 rosin test (Third Revision)
CHD 20
3
Methods of tests
426
IS 354 : Part 3 : 2024
Methods of sampling and test for resins for paints Part 3 Special test methods for phenolic resins (Third Revision)
CHD 21
3
Methods of tests
427
IS 354 : Part 4 : 2024
Resins for Paints — Methods of Sampling and Test Part 4 Special Test Methods for Epoxy Resins (Third Revision)
CHD 21
3
Methods of tests
428
IS 354 : Part 5 : 2024
Resins for Paints — Methods of Sampling and Test Part 5 Special Test Methods for Polyamide Resins (Third Revision)
CHD 21
3
Methods of tests
429
IS 3574 : Part 2 : 2000
Organic pigments for paints - Specification: Part 2 phthalocyanines (First Revision)
CHD 21
1
Product Specification
430
IS 6947 : Part 1 : 1973
Methods of estimation of composite pigments in oil pastes and ready mixed paints: Part 1 estimation of lead, zinc oxide, titanium dioxide, calcium compounds and zinc sulphide
CHD 20
Methods of tests
431
IS 6947 : Part 3 : 1975
Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 3 Estimation of lead chromes, iron blues and zinc compounds
CHD 20
Methods of tests
432
IS 6947 : Part 2 : 1975
Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 2 estimation of zinc chromes, ferric oxide and aluminium
CHD 20
Methods of tests
433
IS 1303 : 1983
Glossary of terms relating to paints (Second Revision)
CHD 20
2
Terminology
434
IS 33 : 1992
Inorganic pigments and extenders for paints - Methods of sampling and test (Third Revision)
CHD 21
3
Methods of tests
435
IS 10018 : 1981
Specification for lacquer, cellulose nitrate, clear, finishing, glossy for wood
CHD 20
Product Specification
436
IS 11811 : 2021
Specification for alkyd resin (First Revision)
CHD 21
1
Product Specification
437
IS 10897 : 1984
Specification for zinc phosphate pigment for paints
CHD 21
Product Specification
438
IS 13467 : 1992
Chlorinated rubber for paints - Specification
CHD 21
Product Specification
439
IS 13966 : 1994
Sodium carboxymethyl cellulose for use in oil industry - Specification
CHD 21
Product Specification
440
IS 14314 : 1995
Thinner, general purpose, for synthetic paints and varnishes - Specification
CHD 20
Product Specification
441
IS 14355 : 2022
Zinc Dust Pigment for Paints — Specification (First Revision)
CHD 21
1
Product Specification
442
IS 14499 : 2021
Strontium Chromate for Paints-Specification (First Revision)
CHD 21
1
Product Specification
443
IS 14925 : 2001
Epoxy resin for paints - Specification
CHD 21
Product Specification
444
IS 15366 : 2003
Dolomite for paint industry - Specification
CHD 21
Product Specification
445
IS 289 : 2021
Aluminium Paste for Paints Specification (Second Revision)
CHD 21
1
Product Specification
446
IS 35 : 2021
Zinc Oxide for Paints — Specification ( Second Revision )
CHD 21
2
Product Specification
447
IS 3520 : 1992
Water-soluble sodium carboxymethyl cellulose - Specification (Second Revision)
CHD 21
2
Product Specification
448
IS 15489 : 2013
Paint, plastic emulsion - Specification (First Revision)
CHD 20
1
Product Specification
449
IS 427 : 2013
Distemper, dry, colour as required - Specification (Third Revision)
CHD 20
3
Product Specification
450
IS 428 : 2013
Washable distemper - Specification (Third Revision)
CHD 20
3
Product Specification
451
IS 5410 : 2013
Cement paint - Specification (Second Revision)
CHD 20
2
Product Specification
452
IS 12744 : 2013
Ready mixed paint, air drying, red oxide - zinc phosphate, priming - Specification : Part 1 for domestic and decoratvie applications (First Revision)
CHD 20
1
Product Specification
453
IS 2932 : Part 1 : 2013
Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification : Part 1 For domestic and decorative applcations (Fourth Revision)
CHD 20
4
Product Specification
454
IS 2933 : Part 1 : 2013
Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision)
CHD 20
2
Product Specification
455
IS 13183 : 1991
Aluminium paint, heat resistant - Specification
CHD 20
Product Specification
456
IS 13184 : 1991
Mastic filler, epoxy based - Specification
CHD 20
Product Specification
457
IS 13239 : 2016
Epoxy surfacer (Two Pack) - Specification (First Revision)
CHD 20
1
Product Specification
458
IS 13607 : 1992
Heady mixed paint, finishing, general purposes, synthetic - Specification
CHD 20
Product Specification
459
IS 13871 : 2021
Powder Coating - Specification
CHD 20
1
Product Specification
460
IS 139 : 2018
Ready mixed paint, marking, quick drying, for marking with rubber stamps - Specification (Third Revision)
CHD 20
3
Product Specification
461
IS 140 : 2015
Ready mixed paint, exterior, petrol resisting, air drying - Specification (Second Revision)
CHD 20
2
Product Specification
462
IS 1419 : 1989
Antifouling paint, brushing, for ships bottom and hulls - Specification (Second Revision)
CHD 20
2
Product Specification
463
IS 14209 : 2016
Epoxy enamel, two component, glossy - Specification (First Revision)
CHD 20
1
Product Specification
464
IS 144 : 1950
Specification for ready mixed paint, brushing, petrol resisting, air - Drying, for interior painting of tanks and container & red oxide (Colour Unspecified)
CHD 20
Product Specification
465
IS 145 : 1950
Specification for ready mixed paint, slushing, petrol resisting, air - Drying, for interior painting of tanks and - Containers, red oxide, (Colour Unspecified)
CHD 20
Product Specification
466
IS 14506 : 1998
Epoxy redoxide zinc phosphate weldable primer,two component - Specification
CHD 20
Product Specification
467
IS 14589 : 1999
Zinc priming paint, epoxy based, two - Pack - Specification
CHD 20
Product Specification
468
IS 146 : 1950
Specification for ready mixed paint, brushing, petrol resisting, stoving, for interior painting of tanks and containers, red oxide (Colour Unspecified)
CHD 20
Product Specification
469
IS 147 : 1950
Specification for ready mixed paint, slushing, petrol resisting, stoving for interior painting of tanks and containers, red oxide (Colour Unspecified)
CHD 20
Product Specification
470
IS 142 : 2017
Specification for ready mixed paint, exterior, petrol resisting, stoving (Second Revision)
CHD 20
2
Product Specification
471
IS 17072 : 2019
Non plastic, biodegradable polymer based paper coating chemical
CHD 20
Product Specification
472
IS 13159 : Part 1 : 1993
Pipe flanges and flanged fittings specification: Part 1 dimensions
MED 17
Dimensions
473
IS 15729 : 2007
Natural gas pressure regulating and metering terminal - Code of practice
MED 17
Code of Practice
474
IS 2379 : 1990
Pipelines - Identification - Colour code (First Revision)
MED 17
1
Code of Practice
475
IS 3133 : 1989
Manhole and inspection openings for chemical equipment - General requirements (First Revision)
MED 17
1
Methods of tests
476
IS 4049 : Part 2 : 1996
Formed ends for tanks and pressure vessels - Specification: Part 2 inside diameter basis (First Revision)
MED 1
1
Dimensions
477
IS 4092 : Part 1 : 1992
Centrifuges of the basket and bowl and vibrating type for use in industrial and commercial applications: Part 1 general requirements (Second Revision)
MED 17
2
Product Specification
478
IS 4682 : Part 1 : 1994
Code of practice for lining of vessels and equipment for chemical processes: Part 1 rubber lining (First Revision)
MED 17
1
Code of Practice
479
IS 4682 : Part 4 : 1998
Code of practice for lining of vessels and equipment for chemical processes: Part 4 lining with sheet thermoplastics (First Revision)
MED 17
1
Code of Practice
480
IS 5036 : 1969
Specification for filter presses, recessed plate type, and plate and frame type
MED 17
Product Specification
481
IS 6034 : 1989
Insulating oil conditioning plants - Specification (First Revision)
MED 17
1
Product Specification
482
IS 4682 : Part 9 : 1974
Code of practice for lining of vessels and equipment for chemical processes: Part 9 titanium
MED 17
Code of Practice
483
IS 109 : 2017
Specification for ready mixed paint, finishing, priming, plaster, to indian standard colour no. 361 light stone and no. 631 light grey, white and off - White (Second Revision)
CHD 20
2
Product Specification
484
IS 110 : 2017
Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)
CHD 20
3
Product Specification
485
IS 3537 : 2017
Ready mixed paint, finishing, interior, for general purposes, to indian standard colours - Specification (First Revision)
CHD 20
1
Product Specification
486
IS 3585 : 2018
Ready mixed paint, aluminium, brushing, priming, water resistant for woodwork - Specification (First Revision)
CHD 20
1
Product Specification
487
IS 101 : Part 5 : Sec 5 : 2019
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 5 Impact resistance - Falling - weight test, small - area indenter
CHD 20
Methods of tests
488
IS 2074 : 2023
Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)
CHD 20
4
Product Specification
489
IS 5 : 2007
Colours for ready mixed paints and enamels (Sixth Revision)
CHD 20
6
Code of Practice
490
IS 38 : 1976
Specification for antimony oxide for paints (First Revision)
CHD 21
1
Product Specification
491
IS 40 : 2021
Carbon Black for Paints — Specification ( Second Revision )
CHD 21
2
Product Specification
492
IS 44 : 1991
Iron oxide pigments for paints - Specification (Second Revision)
CHD 21
2
Product Specification
493
IS 51 : 1998
Zinc chrome for paints - Specification (Fourth Revision)
CHD 21
4
Product Specification
494
IS 54 : 1988
Specification for green oxide of chromium for paints (Second Revision)
CHD 21
2
Product Specification
495
IS 55 : 1970
Specification for ultramarine blue for paints (First Revision)
CHD 21
1
Product Specification
496
IS 56 : 1993
Prussian blue (Iron blue) for paints - Specification (Second Revision)
CHD 21
2
Product Specification
497
IS 62 : 2006
Graphite for Paints-Specification
CHD 21
1
Product Specification
498
IS 63 : 2006
Whiting for paint and putty - Specification (Third Revision)
CHD 21
3
Product Specification
499
IS 66 : 2024
Hydrated Magnesium Silicate (Talc) for Paints — Specification (Third Revision)
CHD 21
3
Product Specification
500
IS 67 : 1998
Silica for paints - Specification (Second Revision)
CHD 21
2
Product Specification
501
IS 68 : 2006
China clay (Kaolin) for paints - Specification (Second Revision)
CHD 21
2
Product Specification
502
IS 70 : 1980
Specification for cuprous oxide for paints (First Revision)
CHD 21
1
Product Specification
503
IS 74 : 1979
Methods of sampling and test for drying oils for paints (Second Revision)
CHD 21
2
Methods of tests
504
IS 101 : Part 10 : Sec 1 : 2022
Methods of sampling and test for paints varnishes and related products: Part 10 Instrumental analysis: Sec 1 Particle size analysis - Laser diffraction methods
CHD 20
1
Methods of tests
505
IS 77 : 1976
Specification for linseed oil, boiled, for paints (Second Revision)
CHD 21
2
Product Specification
506
IS 79 : 2021
Specification for linseed stand oil for paints (Second Revision)
CHD 21
2
Product Specification
507
IS 80 : 1991
Tung oil for paints - Specification (Second Revision)
CHD 21
2
Product Specification
508
IS 81 : 1989
Dehydrated castor oil for paints - Specification (Second Revision)
CHD 21
2
Product Specification
509
IS 82 : 1973
Methods of sampling and test for thinners and solvents for paints (First Revision)
CHD 21
1
Methods of tests
510
IS 411 : 2020
Titanium dioxide, anatase, for paints - Specification ( Fourth Revision )
CHD 21
4
Product Specification
511
IS 553 : 1984
Specification for rosin (Gum Rosin) (Second Revision)
CHD 21
2
Product Specification
512
IS 840 : 1986
Cashewnut shell liquid (CNSL) (Second Revision)
CHD 21
2
Product Specification
513
IS 3527 : 1972
Specification for mica for paints (First Revision)
CHD 21
1
Product Specification
514
IS 9788 : 2023
Titanium dioxide rutile for paints- Specification First Revision
CHD 21
1
Product Specification
515
IS 150 : 1950
Specification for ready mixed paint, brushing, finishing, stoving, enamel, colour as required
CHD 20
Product Specification
516
IS 158 : 2015
Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)
CHD 20
4
Product Specification
517
IS 159 : 1981
Specification for ready mixed paint, brushing, acid resisting (First Revision)
CHD 20
1
Product Specification
518
IS 168 : 2016
Ready mixed paint, air drying for general purpose - Specification (Fourth Revision)
CHD 20
4
Product Specification
519
IS 198 : 1978
Specification for varnish, gold size (First Revision)
CHD 20
1
Product Specification
520
IS 337 : 1975
Specification for varnish, finishing, interior (First Revision)
CHD 20
1
Product Specification
521
IS 356 : 1991
Ester gum - Specification (Second Revision)
CHD 21
2
Product Specification
522
IS 419 : 2023
Putty for use on window frames - specification
CHD 20
2
Product Specification
523
IS 430 : 1972
Specification for paint remover, solvent type, non - Flammable (Second Revision)
CHD 20
2
Product Specification
524
IS 431 : 1972
Specification for paint remover, solvent type, flammable (Second Revision)
CHD 20
2
Product Specification
525
IS 524 : 1983
Specification for varnish, finishing, exterior, synthetic, air - drying (Second Revision)
CHD 20
2
Product Specification
526
IS 525 : 1968
Specification for varnish, finishing, exterior and general purposes (First Revision)
CHD 20
1
Product Specification
527
IS 9508 : 1980
Guide for Treatment and Disposal of Effluents of Cotton and Synthetic Textile Industry
CHD 32
Code of Practice
528
IS 9509 : 1980
Guide for Treatment and Disposal of Effluents of Viscose Rayon Industry
CHD 32
Code of Practice
529
IS 3539 : 1966
Specification for ready mixed paint, undercoating, for use under oil finishes, to indian standard colours, as required
CHD 20
Product Specification
530
IS 3678 : 2016
Ready mixed paint, thick white, for lettering - Specification (First Revision)
CHD 20
1
Product Specification
531
IS 3709 : 1966
Specification for mastic cement for bedding of metal windows
CHD 20
Product Specification
532
IS 5666 : 1970
Specification for etch (Pretreatment) primer
CHD 20
Product Specification
533
IS 5667 : 1970
Specification for thinner for cellulose nitrate based paints and lacquers
CHD 20
Product Specification
534
IS 6125 : 2017
Enamel, synthetic, stoving, for automobiles - Specification (First Revision)
CHD 20
1
Product Specification
535
IS 6126 : 1971
Specification for nitrocellulose surfacer
CHD 20
Product Specification
536
IS 6714 : 1989
Ready mixed paint, finishing, non - slip, deck - Specification (First Revision)
CHD 20
1
Product Specification
537
IS 6948 : 1973
Specification for ready mixed paint, undercoat, synthetic for ships
CHD 20
Product Specification
538
IS 6951 : 1973
Specification for ready mixed paint, finishing, exterior, for ships
CHD 20
Product Specification
539
IS 7164 : 1973
Specification for stopper
CHD 20
Product Specification
540
IS 5691 : 1970
Specification for lacquer, cellulose nitrate, pigmented, finishing, glossy
CHD 20
Product Specification
541
IS 8766 : 1978
Specification for driers for paints
CHD 21
Product Specification
542
IS 8982 : 2019
Ready mixed paint, finishing, air-drying for war equipment - Specification (Second Revision)
CHD 20
2
Product Specification
543
IS 9862 : 2017
Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)
CHD 20
1
Product Specification
544
IS 14946 : 2001
Zinc ethyl silicate primer, two components - Specification
CHD 20
Product Specification
545
IS 14947 : 2001
Enamel synthetic, oil resistant, air drying - Specification
CHD 20
Product Specification
546
IS 14948 : 2001
Paint coal tar epoxy, two pack, black and brown (Base and Hardner) - Specification
CHD 20
Product Specification
547
IS 5688 : 2018
Methods of Test for Preformed Block-Type and Pipe-Covering Type Thermal Insulation (Second Revision)
CHD 27
2
Methods of tests
548
IS 17680 : Part 1 : 2021
Hard coal and coke - Mechanical sampling : Part 7 methods for determining the precision of sampling, sample preparation and testing (First Revision)
CHD 21
Methods of tests
549
IS 17546 : 2021
Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification
CED 50
Product Specification
550
IS 1065 : Part 1 : 2019
Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)
CHD 1
Methods of tests
551
IS 1065 : Part 2 : 2019
Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking
CHD 1
Methods of tests
552
IS 1060 : Part 4 : Sec 1 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 1 standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
CHD 15
Methods of tests
553
IS 1060 : Part 4 : Sec 4 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 4 measurement of diffuse radiance factor
CHD 15
Methods of tests
554
IS 1060 : Part 4 : Sec 8 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 8 determination of water soluble chlorides
CHD 15
Methods of tests
555
IS 1060 : Part 4 : Sec 9 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 9 determination of water soluble sulfates
CHD 15
Methods of tests
556
IS 1060 : Part 4 : Sec 10 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 10 determination of total chlorine and organically bound chlorine
CHD 15
Methods of tests
557
IS 423 : 1961
Specification for Plastic wood for joiners filler (Revised)
CHD 20
Product Specification
558
IS 6667 : 1972
Glossary of terms used in synthetic resin industry
CHD 20
Terminology
559
IS 3526 : 1981
Specification for barium chromate for paints (First Revision)
CHD 21
1
Product Specification
560
IS 9873 : Part 5 : 2017
Safety of toys: Part 5 determination of total concentration of certain elements in toys
PCD 30
Methods of tests
561
IS 6213 : Part 8 : Sec 1 : 2017
Methods of test for pulp: Part 8 preparation of laboratory sheets for physical testing: Sec 1 conventional sheet - Former method (First Revision)
CHD 15
Methods of tests
562
IS 9873 : Part 2 : 2017
Safety of toys: Part 2 flammability (Third Revision)
PCD 30
3
Safety Standard
563
IS 9873 : Part 4 : 2017
Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use
PCD 30
Product Specification
564
IS 101 : Part 2 : Sec 5 : 2017
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 5 determination of volatile organic compound content of low-VOC emulsion paints (In-Can VOC)
CHD 20
Methods of tests
565
IS 3536 : 2016
Ready mixed paint, brushing, wood primer - Specification (Second Revision)
CHD 20
2
Product Specification
566
IS 16556 : 2016
Municipal solid waste compost, manure grade - Specification
FAD 7
Product Specification
567
IS 9873 : Part 9 : 2017
Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products
PCD 30
Safety Standard
568
IS 15573 : 2018
Polyaluminium Chloride (First Revision)
CHD 13
1
Product Specification
569
IS 16676 : 2017
Solventless liquid epoxy system for application on interior and exterior surfaces of steel water pipeline - Specification
CHD 20
Product Specification
570
IS 13360 : Part 8 : Sec 14 : 2018
Plastics - Methods of testing: Part 8 performance/chemical properties section 14 determination of the effects of exposure to damp heat, water spray and salt mist (First Revision)
PCD 27
1
Methods of tests
571
IS 789 : 2018
Ink, drawing, waterproof, black ? specification (Second Revision)
CHD 14
2
Product Specification
572
IS 16983 : 2018
Solid bleached sulphate board - Specification
CHD 16
Product Specification
573
IS 7063 : Part 2 : 2018
Method of test for corrugated fibreboard: Part 2 determination of edgewise crush resistance (Unwaxed Edge Method) (First Revision)
CHD 16
1
Methods of tests
574
IS 6448 : 2018
Diammonium phosphate - Specification (Third Revision)
FAD 7
3
Product Specification
575
IS 8983 : 2018
Ready mixed paint, finishing, stoving for war equipment - Specification (First Revision)
CHD 20
1
Product Specification
576
IS 2252 : 2018
Diacetone alcohol - Specification (Fourth Revision)
PCD 9
4
Product Specification
577
IS 5724 : 2018
Thermal insulating cements - Methods of test (First Revision)
CHD 27
1
Methods of tests
578
IS 826 : 2018
Ammonium sulphate, fertilizer grade - Specification (Third Revision)
FAD 7
3
Product Specification
579
IS 101 : Part 2 : Sec 1 : 2018
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 1 water content (Fourth Revision)
CHD 20
4
Methods of tests
580
IS 17054 : Part 2 : 2019
Surface active agents - Detergents - Determination of cationic - Active matter content: Part 2 cationic - Active matter of low molecular mass (Between 200 And 500)
CHD 25
Methods of tests
581
IS 17218 : 2019
Solar Thermo-Reflective Exterior Coating for Cooling of Roof Top
CHD 20
Product Specification
582
IS 16603 : 2018
Solid Waste Management in the Fertilizer Industry Code of Practice
CHD 33
Code of Practice
583
IS 17268 : Part 1 : 2019
Method of Tests for Soap Part 1 Determination of Chloride Content — Potentiometric Method
CHD 25
Methods of tests
584
IS 1060 : Part 4 : Sec 13 : 2020
Methods of Sampling and Test for Paper and Allied Products Part 4 Methods of Test for Paper, Board and Pulps Section 13 Measurement of diffuse blue reflectance factor — Indoor daylight conditions ( ISO brightness ) ( First Revision )
CHD 15
Methods of tests
585
IS 17443 : 2020
Tabular Alumina - Specification
CHD 1
Product Specification
586
IS 16268 : 2017
Plastic Pipes and Fittings - Combined Chemical-Resistance Classification Table
CED 50
Others
587
IS 17545 : 2021
White cement based polymeric putty
CHD 20
Product Specification
588
IS 17568 : 2021
THERMAL PAPER SPECIFICATION
CHD 15
Product Specification
589
IS 17659 : 2021
SPECIFICATION FOR POLYESTER POLYOL
PCD 12
Product Specification
590
IS 17727 : 2021
Water-Soluble Sodium Carboxymethyl Cellulose for Paints - Specification
CHD 21
Product Specification
591
IS 8008 : 2022
Injection Moulded/Machined Polyethylene Fittings for Water Supply � Specification ( Second Revision )
CED 50
Product Specification
592
IS 8360 : 2022
Fabricated Polyethylene Fittings for Water Supply � Specification (First Revision)
CED 50
Product Specification