| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 9995 : 1981 |
Specification for visor for non-metal police and firemen's helmets |
CED 22 |
| 2 |
IS 12701 : 1996 |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
CED 3 |
| 3 |
IS 10579 : 1983 |
Specification for polyethylene (PE) insulation and sheath of telecommunication cables |
LITD 6 |
| 4 |
IS 6411 : 1985 |
Specification for gel - Coated glass fibre reinforced polyester resin bath tubs (first revision) |
CED 3 |
| 5 |
IS 6312 : 1994 |
Polyethylene containers for the transport of materials - Specification (Second Revision) |
PCD 21 |
| 6 |
IS 15351 : 2015 |
Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision) |
TXD 35 |
| 7 |
IS 10889 : 2004 |
High density polyethylene films (First Revision) |
PCD 12 |
| 8 |
IS 14535 : 1998 |
Recycled plastics for the manufacturing of products - Designation |
PCD 12 |
| 9 |
IS 2543 : 1995 |
Cellulose secondary acetate materials for moulding and extrusion - Specification (First Revision) |
PCD 12 |
| 10 |
IS 3395 : 1997 |
Low density polyethylene (Ldpe) and linear low density polyethylene (Lldpe) materials for moulding and extrusion - Specification (Second Revision) |
PCD 12 |
| 11 |
IS 3730 : 1988 |
Specification for high density polyethylene bucket (First Revision) |
PCD 12 |
| 12 |
IS 5322 : 1988 |
Specification for high density polyethylene wash-bowls (First Revision) |
PCD 12 |
| 13 |
IS 5378 : 1994 |
Polyethylene cane - Specification (First Revision) |
PCD 12 |
| 14 |
IS 7903 : 2017 |
Textiles - Tarpaulins made from high density polyethylene (HDPE) woven fabrics - Specification (fifth revision) |
TXD 23 |
| 15 |
IS 15801 : 2008 |
Polypropylene - Random Copolymer Pipes for Hot and Cold Water Supplies - Specification |
CED 50 |
| 16 |
IS 15927 : Part 1 : 2012 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 1 Fittings for Socket Fusion Using Heated Tools |
CED 50 |
| 17 |
IS 15927 : PART 2 : 2012 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 2 Spigot Fittings for Butt Fusion for Socket Fusion Using Heated Tools and for Use with Electro Fusion Fittings |
CED 50 |
| 18 |
IS 15927 : PART 3 : 2011 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 3 Electro Fusion Fittings |
CED 50 |
| 19 |
IS 16098 Part 2 : 2013 |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage – Specification: Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
CED 50 |
| 20 |
IS 4984 : 2016 |
Polyethylene Pipes for Water Supply - Specification (Fifth Revision) |
CED 50 |
| 21 |
IS 8008 : Part 1 : 2003 |
Injection moulded/machined high density polyethylene (HDPE) fittings for potable water supplies - Specification: Part 1 general requirements for fittings (First Revision) |
CED 50 |
| 22 |
IS 14151 : Part 1 : 1999 |
Irrigation Equipment - Sprinkler Pipes - Specification : Part 1 Polyethylene Pipes (First Revision) |
FAD 17 |
| 23 |
IS 15828 : 2009 |
Design and Construction of Plastic Lined Farm Ponds - Code of Practice |
FAD 22 |
| 24 |
IS 16627 : 2017 |
Agro textiles – High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system – Specification |
TXD 35 |
| 25 |
IS 17216 : 2019 |
Polyethylene mulch films for agriculture and horticulture - Specification |
PCD 12 |
| 26 |
IS 17371 : 2020 |
Geosynthetics – Geogrids for flexible pavements – Specification |
TXD 30 |
| 27 |
IS 17373 : 2020 |
Geosynthetics - Geogrids used in reinforced soil retaining structures - Specification |
TXD 30 |
| 28 |
IS 17374 : 2020 |
Geosynthetics – Reinforced HDPE membrane for effluents and chemical resistance lining – Specification |
TXD 30 |
| 29 |
IS 16352 : 2020 |
Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision) |
TXD 30 |
| 30 |
IS 7328 : 2020 |
Specification for polyethylene material for moulding and extrusion (Third Revision) |
PCD 12 |
| 31 |
IS 17483 : Part 1 : 2020 |
Geosynthetics - Geocells - Specification (Part 1) Load Bearing Application |
TXD 30 |
| 32 |
IS 17483 : Part 2 : 2020 |
Geosynthetics - Geocells - Specification (Part 2) Slope Erosion Protection Application |
TXD 30 |
| 33 |
IS 17425 : 2020 |
Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification |
FAD 17 |
| 34 |
IS 1885 : Part 62 : 2021 |
Electrotechnical Vocabulary: Part 62 Electrical Insulating Solids Liquids and Gases ( Second Revision ) |
ETD 1 |
| 35 |
IS/ISO 8686 : Part 3 : 2018 |
CRANES DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS PART 3 TOWER CRANES |
MED 14 |
| 36 |
IS 17577 : 2021 |
Reliability and availability evaluation of HVDC systems |
ETD 40 |
| 37 |
IS 15450 : 2004 |
Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification |
CED 50 |
| 38 |
IS 12786 : 1989 |
Irrigation Equipment - Polyethylene Pipes for Irrigation Laterals - Specification |
FAD 17 |
| 39 |
IS 2508 : 2016 |
Polyethylene films and sheets - Specification (Third Revision) |
PCD 12 |
| 40 |
IS 5281 : 2023 |
Fenitrothion Emulsifiable Concentrates - Specification |
FAD 1 |
