SNo |
IS Number |
Title |
Technical Committee |
1 |
IS 3470 : 2017 |
Hexane, food grade - Specification (Second Revision) |
PCD 3 |
2 |
IS 253 : 2014 |
Specification for common salt (Fourth Revision) |
FAD 8 |
3 |
IS 4684 : 1975 |
Specification for edible groundnut flour (Expeller Pressed) (First Revision) |
FAD 16 |
4 |
IS 1942 : 1968 |
Specification for bone - Meal as Poultry feed supplement (First Revision) |
FAD 5 |
5 |
IS 1675 : 1971 |
Specification for stearic acid, technical (First Revision) |
FAD 13 |
6 |
IS 612 : 1992 |
Roasted chicory powder - Specification (Third Revision) |
FAD 6 |
7 |
IS 10523 : 2014 |
Baby toilet soap - Specification (First Revision) |
CHD 25 |
8 |
IS 1090 : 2002 |
Compressed Hydrogen - Specification (Third Revision) |
CHD 6 |
9 |
IS 5510 : 1969 |
Guide for soil surveys for river valley projects |
WRD 6 |
10 |
IS 6932 : Part 2 : 1973 |
Method of test for building limes Determination of carbon dioxide content |
CED 4 |
11 |
IS 4032 : 1985 |
Method of Chemical Analysis of Hydraulic Cement (First Revision) |
CED 2 |
12 |
IS 6932 : Part 1 : 1973 |
Method of test for building limes Part 1 Determination of insoluble residue, loss on ignition, insoluble matter, silicone dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide |
CED 4 |
13 |
IS 15698 : 2006 |
Dehydwted bamboo shoots - Specification |
FAD 10 |
14 |
IS 1448 : Part 58 : 1991 |
Methods of test for petroleum and its products [P: 58] determination of insolubles in greases (First Revision) |
PCD 1 |
15 |
IS 1448 : Part 106 : 1981 |
Methods of test for petroleum and its products [p:106] determination of oxidation characteristics of inhibited steam - Turbine oils |
PCD 1 |
16 |
IS 650 : 1991 |
Standard sand for testing cement - Specification (Second Revision) |
CED 2 |
17 |
IS 11153 : 1996 |
Manganese dioxide for dry batteries - Specification (First Revision) |
CHD 1 |
18 |
IS 14781 : 2000 |
Sodium thiosulphate - Specification |
CHD 1 |
19 |
IS 14932 : 2001 |
Sulfamic acid - Specification |
CHD 1 |
20 |
IS 11673 : 1992 |
Sodium hypochlorite solution - Specification (First Revision) |
CHD 1 |
21 |
IS 12612 : 1988 |
Method for Colorimetric - determinatxon of tungsten |
CHD 1 |
22 |
IS 12491 : 1988 |
Method for determination of magnesium by atomic absorption spectrophotometry |
CHD 1 |
23 |
IS 12478 : 1988 |
Specification for ammonium sulphate,technical |
CHD 1 |
24 |
IS 13318 : 1992 |
Spectrophotometric determination of nickel test |
CHD 1 |
25 |
IS 13320 : 1992 |
Determination of iron by atomic absorption spectrophotometry - Test method |
CHD 1 |
26 |
IS 14212 : 1995 |
Sodium and potassium silicates - Method of test |
CHD 1 |
27 |
IS 14780 : 2000 |
Zinc naphthenate - Specification |
CHD 1 |
28 |
IS 9497 : 1980 |
Method for determination of sodium and potassium (Flame Photometric) |
CHD 1 |
29 |
IS 9506 : 1980 |
Method for determination of sulphate (volumetric) |
CHD 1 |
30 |
IS 10125 : 1982 |
Specification for copper carbonate |
CHD 1 |
31 |
IS 10535 : 1983 |
Specification for manganese sulphate, monohydrate |
CHD 1 |
32 |
IS 10895 : 1984 |
Specification for copper nitrate |
CHD 1 |
33 |
IS 11123 : 1984 |
Method for determination of copper by atomic absorption spectrophotometry |
CHD 1 |
34 |
IS 11124 : 1984 |
Method for atomic absorption spectrophotometric determination of arsenic |
CHD 1 |
35 |
IS 11305 : 1985 |
Specification for thionyl chloride |
CHD 1 |
36 |
IS 12041 : 1987 |
Method for the determination of mercury by atomic absorption spectrophotometer |
CHD 1 |
37 |
IS 12042 : 1987 |
Method for determination of molybdenum by atomic absorption spectrophotometer |
CHD 1 |
38 |
IS 12074 : 1987 |
Method for determination of lead by atomic absorption spectrophotometer |
CHD 1 |
39 |
IS 2960 : 1964 |
Specification for bookbinding leather |
CHD 17 |
40 |
IS 11224 : 1985 |
Specification for rock phosphate for chemical industries |
CHD 1 |
41 |
IS 11236 : 1985 |
Specification for manganese acetate |
CHD 1 |
42 |
IS 11237 : 1985 |
Specification for manganese carbonate |
CHD 1 |
43 |
IS 9398 : 1987 |
Specification for silicon tetrachloride, technical (First Revision) |
CHD 1 |
44 |
IS 7130 : 1994 |
Chlorosulphontc acid,technical - Specification |
CHD 1 |
45 |
IS 7163 : 1989 |
Potassium iodide, pure and analytical reagent - Specification (First Revision) |
CHD 1 |
46 |
IS 8325 : 1983 |
Specification for nickel formate for nickel catalyst (First Revision) |
CHD 1 |
47 |
IS 8768 : 2000 |
Method of measurement of colour in liquid chemical products platinum - Cobalt scale (Second Revision) |
CHD 1 |
48 |
IS 8814 : 1978 |
Specification for sodium metal |
CHD 1 |
49 |
IS 5759 : 2006 |
Antifreeze coolant - Specification (Second Revision) |
PCD 25 |
50 |
IS 13271 : 2013 |
Phenolic syntans - Methods of test (First Revision) |
CHD 17 |
51 |
IS 5466 : 2013 |
Vegetable tanning materials - Methods of test (First Revision) |
CHD 17 |
52 |
IS 2317 : 1975 |
Method for gravimetric determination of sulphates (First Revision) |
CHD 1 |
53 |
IS 7223 : 1986 |
Specification for potassium chloride, analytical reagent (First Revision) |
CHD 1 |
54 |
IS 5301 : 1987 |
Sodium Chlorate |
CHD 1 |
55 |
IS 9252 : 1979 |
Method for determination of zinc (Volumetric) |
CHD 1 |
56 |
IS 1514 : 1990 |
Methods of sampling and test for quicklime and hydrated lime (First Revision) |
CHD 1 |
57 |
IS 9825 : 2003 |
Chlorine tablets - Specification (Second Revision) |
CHD 1 |
58 |
IS 13524 : 1992 |
Potassium Perchlorate for Explosives and Pyrotechnic Compositions specification |
CHD 26 |
59 |
IS 7886 : 1997 |
Barium chromate for explosives and pyrotechnic industry - Specification (First Revision) |
CHD 26 |
60 |
IS 7588 : 1992 |
Barytes for explosives and pyrotechnic compositions - Specification (First Revision) |
CHD 26 |
61 |
IS 7602 : 1975 |
Specification for lead chromate for explosive and pyrotechnic compositions |
CHD 26 |
62 |
IS 7633 : 1982 |
Specification for calcium carbonate for explosive and pyrotechnic industry (First Revision) |
CHD 26 |
63 |
IS 8063 : 1976 |
Specification for red lead for explosive and pyrotechnic industry |
CHD 26 |
64 |
IS 4396 : 1981 |
Specification for barium nitrate for explosive and pyrotechnic compositions (First Revision) |
CHD 26 |
65 |
IS 2012 : 2006 |
Red phosphorus - Specification (First Revision) |
CHD 26 |
66 |
IS 2307 : 2004 |
Magnesium powder for explosive and pyrotechnic compositions - Specification (Second Revision) |
CHD 26 |
67 |
IS 438 : 2006 |
Aluminium powder for explosives and pyrotechnic compositions - Specification (Second Revision) |
CHD 26 |
68 |
IS 708 : 1987 |
Specification for potassium chlorate for explosive and pyrotechnic industry (Second Revision) |
CHD 26 |
69 |
IS 1091 : 1985 |
Specification for Nitrocellulose |
CHD 26 |
70 |
IS 6609 : Part 1 : 1972 |
Methods of test for commercial blasting explosives and accessories: Part 1 gun powder |
CHD 26 |
71 |
IS 5671 : 1984 |
Specification for strontium nitrate for pyrotechnic compositions (First Revision) |
CHD 26 |
72 |
IS 3692 : 1975 |
Specification for rubber closures, pharmaceutical (First Revision) |
PCD 13 |
73 |
IS 5731 : 1970 |
Specification for antimony sulphide for explosive and pyrotechnic compositions |
CHD 26 |
74 |
IS 3399 : 2013 |
Zinc oxide for rubber industry - Specification (Third Revision) |
PCD 13 |
75 |
IS 11491 : 1985 |
Specification for blasting soluble nitrocellulose for explosives industry |
CHD 26 |
76 |
IS 11783 : 1986 |
Specification for ferrosilicon for explosive and pyrotechnic industry |
CHD 26 |
77 |
IS 11803 : 1986 |
Specification for magnesium oxide for explosive ammunition protective compositions and pyrotechnic industry |
CHD 26 |
78 |
IS 1741 : 2019 |
Latex foam rubber products - Specification (First Revision) |
PCD 13 |
79 |
IS 1684 : 1994 |
Red oxide of iron for rubber industry - Specification (Second Revision) |
PCD 13 |
80 |
IS 301 : 1982 |
Specification for potassium nitrate for explosive and pyrotechnic compositions (Second Revision) |
CHD 26 |
81 |
IS 5598 : 1986 |
Code of practice for bale coating, packing and marking of natural rubber (First Revision) |
PCD 13 |
82 |
IS 5193 : 1998 |
Rubber sealing rings for domestic fruit and vegetable preserving jars specification (First Revision) |
PCD 13 |
83 |
IS 8862 : 1978 |
Specification for titanium dioxide (Anatase Type) for rubber industry |
PCD 13 |
84 |
IS 4611 : 1991 |
Metallic zinc powder (Zinc Dust) - Specification (Second Revision) |
CHD 1 |
85 |
IS 9407 : 1980 |
Specification for light magnesium oxide for rubber industry |
PCD 13 |
86 |
IS 12551 : 1988 |
Specification for potassium pyrophosphate for electroplating |
CHD 5 |
87 |
IS 12557 : 1988 |
Specification for sodium pyrophosphate for electroplating |
CHD 5 |
88 |
IS 12865 : 1989 |
Potassium persulphate, photographic grade - Specification |
CHD 5 |
89 |
IS 13651 : 1993 |
1 - 1 - 1 trichloroethane (Methyl Chloroform) for electroplating - Specification |
CHD 5 |
90 |
IS 15304 : 2003 |
Dipotassium hydrogen phosphate for electroplating - Specification |
CHD 5 |
91 |
IS 2211 : 1993 |
Anhydrous sodium thiosulphate, photographic grade - Specification . (Second Revision) |
CHD 5 |
92 |
IS 6655 : 1972 |
Methods of test for sulphur |
CHD 1 |
93 |
IS 3660 : Part 4 : 2017 |
Methods of test for natural rubber: Part 4 determination of total copper - Photometric method [ nr : 4 ] (Third Revision) |
PCD 29 |
94 |
IS 5305 : 1969 |
Method for volumetric determination of phosphorus |
CHD 1 |
95 |
IS 5877 : 1971 |
Specification for barium sulphide, technical (Black Ash) |
CHD 1 |
96 |
IS 6015 : 1984 |
Specification for barium hydroxide (First Revision) |
CHD 1 |
97 |
IS 9316 : Part 7 : 1987 |
Methods of test for rubber latex: Part 7 determination of total copper [rl:7] |
PCD 29 |
98 |
IS 10158 : 1982 |
Methods of analysis of solid wastes (Excluding Industrial Solid Wastes) |
EED 8 |
99 |
IS 5288 : 1980 |
Barium Chloride |
CHD 1 |
100 |
IS 4285 : 1967 |
Method for volumetric determination of calcium |
CHD 1 |
101 |
IS 4518 : Part 1 : 1967 |
Methods of tests for styrene - Butadiene rubbers (Sbr): Part 1 determlNatlOn of volatile matter, total ash, organic acid, soap, antioxidants, bound styrene and mooney viscosity |
PCD 29 |
102 |
IS 1448 : Part 1 : 1971 |
Neutralization Number by Potentiometric Titration - Part I |
PCD 1 |
103 |
IS 1448 : Part 55 : 2004 |
Methods of test for petroleum and its products: Part 55 Saponification value, saponifiable and unsaponifiable matter |
PCD 1 |
104 |
IS 10614 : 1983 |
Method for atomic absorption spectrophotometric determination of sodium and potassium |
CHD 1 |
105 |
IS 10896 : 1984 |
Specification for aluminium hydroxide, technical |
CHD 1 |
106 |
IS 1288 : 1982 |
Methods of test for mineral gypsum (Second Revision) |
CHD 1 |
107 |
IS 9958 : 1981 |
Atomic absorption spectrophotometric method - For determination of zinc |
CHD 1 |
108 |
IS 8587 : 1993 |
Acid grade fluorspar for chemical industry - Specification (First Revision) |
CHD 1 |
109 |
IS 6361 : 1971 |
Methods of colorimetric determination of phosphorus |
CHD 1 |
110 |
IS 6507 : 1991 |
Sodium chromate,tetrahydrate specification (Second Revision) |
CHD 1 |
111 |
IS 6135 : 1981 |
Specification for soda ash, fused, technical (First Revision) |
CHD 1 |
112 |
IS 5316 : 1998 |
Ammonium carbonate - Specification (First Revision) |
CHD 1 |
113 |
IS 299 : 2012 |
Alumino - Ferric - Specification (Fifth Revision) |
CHD 1 |
114 |
IS 264 : 2005 |
Nitric acid - Specification (Third Revision) |
CHD 1 |
115 |
IS 7402 : 2011 |
Ceramic water purifier filter candles - Specification (Second Revision) |
FAD 30 |
116 |
IS 1612 : 1976 |
Specification for iron powder (Reduction Grade) (First Revision) |
CHD 1 |
117 |
IS 252 : 2013 |
Caustic soda - Specification (Fourth Revision) |
CHD 1 |
118 |
IS 500 : 1999 |
Potassium metabisulphite, photographic grade - Specification (Fourth Revision) |
CHD 5 |
119 |
IS 13965 : 1994 |
Coconut monoethanolamide for cosmetic industry - Specification |
PCD 19 |
120 |
IS 14137 : 1994 |
Cetyl alcohol for cosmetic industry - Specification |
PCD 19 |
121 |
IS 15154 : 2002 |
Kajal - Specification |
PCD 19 |
122 |
IS 2323 : 2011 |
Spices and condiments - Mustard, whole and ground - Specification (Second Revision) |
FAD 9 |
123 |
IS 263 : 1990 |
Boric acid for cosmetic industry specification (Fifth Revision) |
PCD 19 |
124 |
IS 3987 : 2006 |
Sorbitol solution (70 Percent) for cosmetic industry - Specification (Third Revision) |
PCD 19 |
125 |
IS 4236 : 1999 |
Glyceryl monostearbte for cosmetic industry - Specification (Third Revision) |
PCD 19 |
126 |
IS 6608 : 2004 |
Skin creams - Specification (Second Revision) |
PCD 19 |
127 |
IS 7101 : 1994 |
Coconut diethanolamide for cosmetic industry - Specification (Second Revision) |
PCD 19 |
128 |
IS 3968 : 2013 |
Wattle bark - Specification (First Revision) |
CHD 17 |
129 |
IS 7087 : 1979 |
Specification for ceramic tower packings (First Revision) |
CHD 9 |
130 |
IS 10429 : 2011 |
Powdered talc for ceramic industry - Specification (First Revision) |
CHD 9 |
131 |
IS 5761 : Part 2 : 1984 |
Specification for gold cyanide and gold potassium cyanide for electroplating: Part 2 for special applications (First Revision) |
CHD 5 |
132 |
IS 15752 : 2007 |
Sericite for ceramic industry - Specification |
CHD 9 |
133 |
IS 11477 : 2011 |
Pyrophyllite for ceramic industry - Specification (First Revision) |
CHD 9 |
134 |
IS 11643 : 1985 |
Specification for silicon carbide for bonded abrasive products |
PGD 9 |
135 |
IS 11751 : 1986 |
Specification for sodium sulphite, anhydrous, photographic grade |
CHD 5 |
136 |
IS 10438 : 1983 |
Specification for potassium sulphite, 650 g/l aqueous solution for photographic industry |
CHD 5 |
137 |
IS 10472 : 1983 |
Specification for filter aid powder for use in electroplating |
CHD 5 |
138 |
IS 246 : 1986 |
Specification for sodium thiosulphate, crystalline, photographic grade (Fourth Revision) |
CHD 5 |
139 |
IS 9341 : 1979 |
Specification for sulphamic acid for electroplating |
CHD 5 |
140 |
IS 9342 : 1987 |
Specification for sodium hypophosphite for electroless plating (First Revision) |
CHD 5 |
141 |
IS 3584 : 2007 |
Camphor - Specification (Second Revision) |
PCD 18 |
142 |
IS 326 : Part 14 : 1985 |
Methods of sampling and test for natural and synthetic perfumery materials: Part 14 determination of heavy metals (Second Revision) |
PCD 18 |
143 |
IS 526 : 2007 |
Oil of palmarosa - Specification (Third Revision) |
PCD 18 |
144 |
IS 6947 : Part 1 : 1973 |
Methods of estimation of composite pigments in oil pastes and ready mixed paints: Part 1 estimation of lead, zinc oxide, titanium dioxide, calcium compounds and zinc sulphide |
CHD 20 |
145 |
IS 6947 : Part 2 : 1975 |
Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 2 estimation of zinc chromes, ferric oxide and aluminium |
CHD 20 |
146 |
IS 9245 : 1994 |
Nail polish (Nail Enamel) - Specificaiton (First Revision) |
PCD 19 |
147 |
IS 9157 : 1979 |
Specification for sodium nitrate and potassium nitrate for glass compositions |
CHD 10 |
148 |
IS 9425 : 1980 |
Specification for selenium for glass compositions |
CHD 10 |
149 |
IS 997 : 1973 |
Specification for limestone and dolomite for glass industry (First Revision) |
CHD 10 |
150 |
IS 1922 : 1961 |
Specification for liquid gold, bright |
CHD 10 |
151 |
IS 1355 : 1984 |
Methods of determination of the chemical composition of ash of coal and coke (First Revision) |
PCD 7 |
152 |
IS 1158 : 1973 |
Specification for corn flakes (First Revision) |
FAD 16 |
153 |
IS 12569 : 1989 |
Potato french fries - Specification |
FAD 16 |
154 |
IS 10982 : 1984 |
Specification for strontium sulphate for electroplating |
CHD 5 |
155 |
IS 12925 : 1990 |
Ferric ammonium edta solution photographic grade - Specification |
CHD 5 |
156 |
IS 1880 : 1977 |
Specification for zinc oxide and zinc salts for electroplating (First Revision) |
CHD 5 |
157 |
IS 394 : 1985 |
Specification for ink, cloth marking (Second Revision) |
CHD 14 |
158 |
IS 5410 : 2013 |
Cement paint - Specification (Second Revision) |
CHD 20 |
159 |
IS 63 : 2006 |
Whiting for paint and putty - Specification (Third Revision) |
CHD 21 |
160 |
IS 74 : 1979 |
Methods of sampling and test for drying oils for paints (Second Revision) |
CHD 21 |
161 |
IS 220 : 1988 |
Fountain pen ink - Ferro - Gallo tannate (0.1 Percent Iron Content) specification (Third Revision) |
CHD 14 |
162 |
IS 5011 : 1968 |
Specification for gooch crucibles |
CHD 10 |
163 |
IS 15271 : 2003 |
Namkeen - Specification |
FAD 16 |
164 |
IS 50 : 1980 |
Withdrawl |
CHD 21 |
165 |
IS 54 : 1988 |
Specification for green oxide of chromium for paints (Second Revision) |
CHD 21 |
166 |
IS 15621 : 2005 |
Tetrabromobisphenol-a - Specification |
PCD 12 |
167 |
IS 15623 : 2005 |
Melamine (2, 4, 6 triamino 1, 3, 5 triazine) - Specification |
PCD 12 |
168 |
IS 8766 : 1978 |
Specification for driers for paints |
CHD 21 |
169 |
IS 2650 : 1975 |
Specification for bombay halwa (First Revision) |
FAD 16 |
170 |
IS 1485 : 1993 |
Macaroni, spaghetti, vermicelli and egg noodles - Specification (Second Revision) |
FAD 16 |
171 |
IS 3155 : 1965 |
Specification for makhanna products |
FAD 16 |
172 |
IS 3838 : 1966 |
Specification for self - Raising flour |
FAD 16 |
173 |
IS 3574 : Part 2 : 2000 |
Organic pigments for paints - Specification: Part 2 phthalocyanines (First Revision) |
CHD 21 |
174 |
IS 6287 : 1985 |
Methods of sampling and analysis for sugar confectionery (First Revision) |
FAD 16 |
175 |
IS 3493 : 1978 |
Methods of sampling and test for organic pigments for paints (First Revision) |
CHD 21 |
176 |
IS 840 : 1986 |
Cashewnut shell liquid (CNSL) (Second Revision) |
CHD 21 |
177 |
IS 13262 : 1992 |
Pressure sensitive adhesive tapes with plastic base - Specification |
PCD 12 |
178 |
IS 361 : 2009 |
Normal butyl alcohol, technical - Specification (Third Revision) |
PCD 9 |
179 |
IS 501 : 1976 |
Specification for oxalic acid, technical and analytical reagent (Second Revision) |
PCD 9 |
180 |
IS 880 : 1956 |
Specification for tartaric acid |
PCD 9 |
181 |
IS 4306 : 1987 |
Specification for hexamethylenetetramine (hexamine)(Second Revision) |
PCD 9 |
182 |
IS 5158 : 1987 |
Specification for phthalic anhydride, technical (Second Revision) |
PCD 9 |
183 |
IS 5254 : 1980 |
Specification for acetanllide, technical (First Revision) |
PCD 9 |
184 |
IS 5573 : 1984 |
Specification for ethylene oxide (First Revision) |
PCD 9 |
185 |
IS 5592 : 1981 |
Specification for monochloroacetic acid (First Revision) |
PCD 9 |
186 |
IS 6971 : 1998 |
2 - Ethyl hexan - 1 - Ol - Specification (First Revision) |
PCD 9 |
187 |
IS 7220 : 1974 |
Specification for ethylenediaminetetra - Acetic acid, pure and technical |
PCD 9 |
188 |
IS 7729 : 1975 |
Specification for sodium monochloroacetate |
PCD 9 |
189 |
IS 7901 : 1975 |
Specification for triethanolamine, technical |
PCD 9 |
190 |
IS 7910 : 2003 |
Monoethanolamine - Specification (First Revision) |
PCD 9 |
191 |
IS 9250 : 1979 |
Specification for p - Nitrophenol |
PCD 9 |
192 |
IS 12277 : 1988 |
Specification for polyethylene glycol 400 |
PCD 9 |
193 |
IS 12438 : 1988 |
Specification for dimethyl terephthalate |
PCD 9 |
194 |
IS 13359 : 1992 |
Polyethylene glycol 200 - Specification |
PCD 9 |
195 |
IS 14310 : 1995 |
Glyoxal (40 percent solution) - Specification |
PCD 9 |
196 |
IS 14707 : 1999 |
Methyl acrylate - Specification |
PCD 9 |
197 |
IS 14708 : 1999 |
Ethyl acrylate - Specification |
PCD 9 |
198 |
IS 14709 : 1999 |
n - Butyl acrylate - Specification |
PCD 9 |
199 |
IS 539 : 1974 |
Specification for naphthalene (Second Revision) |
PCD 9 |
200 |
IS 7619 : 1987 |
Specification for pentaerythritol (First Revision) |
PCD 9 |
201 |
IS 9834 : 1981 |
Specification for iso - Butyl alcohol |
PCD 9 |
202 |
IS 10468 : 1983 |
Specification for 1, 3 - Phenylenediamine - 4 - Sulphonic acid |
PCD 26 |
203 |
IS 10475 : 1983 |
Specification for J - Acid urea |
PCD 26 |
204 |
IS 11126 : 1984 |
Specification for 3 - Toluidine |
PCD 26 |
205 |
IS 11176 : 1985 |
Specification for 3,3 -dichlorobenzidine Salts |
PCD 26 |
206 |
IS 11177 : 1985 |
Specification for 4 - Nitro - 2 - Toluidine |
PCD 26 |
207 |
IS 11181 : 1985 |
Specification for sulphotobias acid |
PCD 26 |
208 |
IS 553 : 1984 |
Specification for rosin (Gum Rosin) (Second Revision) |
CHD 21 |
209 |
IS 4265 : 1975 |
4,4-Diaminostilbene-2,2-Disulphonic Acid(first revision) |
PCD 26 |
210 |
IS 4334 : 1985 |
Specification for 2 - Chloroaniline (First Revision) |
PCD 26 |
211 |
IS 4425 : 1967 |
Specification for p - Nitrotoluene o - Sulphonic acid |
PCD 26 |
212 |
IS 4336 : 1985 |
Specification for 4 - Chloroaniline (First Revision) |
PCD 26 |
213 |
IS 4527 : 1968 |
Specification for 2 - Nitro - 4 - Chlorotoluene |
PCD 26 |
214 |
IS 5045 : 1989 |
Dye intermediates - Metanilic acid, technical - Specification (Second Revision) |
PCD 26 |
215 |
IS 5299 : 2001 |
Methods of sampling and tests for dye intermediates (First Revision) |
PCD 26 |
216 |
IS 7362 : 1986 |
Specification for tobias acid (First Revision) |
PCD 26 |
217 |
IS 4526 : 1976 |
Specification for 2, 5 - Dichloroaniline (First Revision) |
PCD 26 |
218 |
IS 7661 : 1975 |
4-aminoazobenzene |
PCD 26 |
219 |
IS 3543 : 1966 |
Specification for papain |
FAD 10 |
220 |
IS 3336 : 1965 |
Specification for shark liver oil for veterinary use |
FAD 12 |
221 |
IS 548 : Part 2 : 1976 |
Methods of sampling and test for oils and fats: Part 2 purity test (Third Revision) |
FAD 13 |
222 |
IS 4627 : 1968 |
Specification for dehydrated cabbage |
FAD 10 |
223 |
IS 6921 : 1973 |
Methods of sampling and test for lac and lac products |
CHD 23 |
224 |
IS 4753 : 2008 |
Potassium nitrate, food grade - Specification (Second Revision) |
FAD 8 |
225 |
IS 3752 : 2005 |
Alcoholic drinks - Methods of test (Second Revision) |
FAD 29 |
226 |
IS 2720 : Part 27 : 1977 |
Methods of test for soils: Part 27 determination of total soluble sulphates (First Revision) |
CED 43 |
227 |
IS 3550 : 1965 |
Methods of test for routine control for water used in industry |
CHD 36 |
228 |
IS 10085 : 2003 |
Chemical analysis of zircon (First Revision) flour or sand |
MTD 34 |
229 |
IS 12308 : Part 13 : 1992 |
Methods of chemical analysis of castiron and pigiron: Part 13 determination of magnesium by atomic absorption spectrometric method (For Magnesium Upto 0.1 Percent) |
MTD 34 |
230 |
IS 12308 : Part 14 : 1993 |
Methods of chemical analysis of cast iron and pig iron: Part 14 determination of titanium by hydrogen peroxide (Spectrophotometric) method (For Titanium Up To 0.25 Percent) |
MTD 34 |
231 |
IS 12308 : Part 7 : 1991 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 7 Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent) |
MTD 34 |
232 |
IS 12614 : Part 5 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 5 determination of phosphorus |
MTD 34 |
233 |
IS 12614 : Part 6 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 6 determination of copper |
MTD 34 |
234 |
IS 12667 : Part 4 : 1989 |
Chromite sand for foundries methods of chemical analysis: Part 4 determination of calcium |
MTD 34 |
235 |
IS 13452 : Part 1 : 1992 |
Chemical analysis of ferrochromium: Part 1 determination of silicon in high carbon ferrochromium by gravimetric method |
MTD 34 |
236 |
IS 13452 : Part 2 : 1992 |
Chemical analysis of ferrochromtum: Part 2 determination of silicon in low carbon ferrochromium by gravimetric method |
MTD 34 |
237 |
IS 13452 : Part 3 : 1992 |
Chemical Analysis of Ferro Chromium - Part-3 Determination of Phosphorous in low carbon Ferro chromium by Spectrophotometric method . |
MTD 34 |
238 |
IS 13452 : Part 7 : 2003 |
Chemical analysis of ferrochromium: Part 7 determination of phosphorus in ferrocliRomium/ chargechrome by alkalimetric method |
MTD 34 |
239 |
IS 13938 : Part 1 : 1994 |
Chemical analysis of ferromanganese: Part 1 determination of silicon by gravimetric method |
MTD 34 |
240 |
IS 13938 : Part 3 : 1993 |
Chemical analysis of ferromanganese: Part 3 determination of phosphorus by (Alkalimetric) method |
MTD 34 |
241 |
IS 13963 : Part 1 : 1994 |
Chemical analysis of cadmium metal: Part 1 determination of copper, zinc, lead and iron |
MTD 34 |
242 |
IS 13963 : Part 2 : 1994 |
Chemical analysis of cadmium metal: Part 2 determination of nickel, arsenic antimony and thallium by spectrophotometric methods |
MTD 34 |
243 |
IS 14529 : 2004 |
Chemical analysis of ferrosilicon - Magnesium alloy (First Revision) |
MTD 34 |
244 |
IS 1559 : Part 7 : 1982 |
Methods of chemical analysis of ferrosilicon: Part 7 determination of manganese (First Revision) |
MTD 34 |
245 |
IS 1559 : Part 5 : 2003 |
Chemical analysis of ferrosilicon: Part 5 determination of aluminium in ferrosilicon (Aluminnjm 0.05 To 1.75 Percent) (Second Revision) |
MTD 34 |
246 |
IS 1559 : Part 3 : 1982 |
Methods of chemical analysis of ferrosilicon: Part 3 determination of sulphur (First Revision) |
MTD 34 |
247 |
IS 1559 : Part 1 : 1988 |
Methods of chemical analysis of ferro - Silicon: Part 1 determination of silicon (Second Revision) |
MTD 34 |
248 |
IS 1559 : 1961 |
Methods of chemical analysis of ferro - Alloys |
MTD 34 |
249 |
IS 1473 : 2004 |
Methods of chemical analysis of manganese ores (First Revision) |
MTD 34 |
250 |
IS 14852 : 2000 |
Flaky graphite for refractory industry - Specification |
MTD 15 |
251 |
IS 1493 : Part 3 : 1987 |
Methods of chemical analysis of iron ores: Part 3 determination of titanium, chromium, vanadium, calcium and magnesium by atomic absorption spectrophotometry |
MTD 34 |
252 |
IS 1527 : 1972 |
Methods for chemical analysis of high silica refractory materials (First Revision) |
MTD 34 |
253 |
IS 15396 : 2003 |
Chemical analysis of ferro - Silicon zirconium alloys |
MTD 34 |
254 |
IS 999 : 1959 |
Methods of chemical analysis of brazing solder |
MTD 34 |
255 |
IS 998 : Part 2 : 1983 |
Methods of chemical analysis of solders (Soft And I&in Cored) determi tion of iron, copper and arsensc (First Revision) |
MTD 34 |
256 |
IS 2000 : Part 2 : 1985 |
Methods of chemical analysis of bauxite: Part 2 determination of silica (First Revision) |
MTD 34 |
257 |
IS 2000 : Part 8 : 1989 |
Chemical analysis of bauxite: Part 8 determination of manganese by atomic absorption spectrophotometric method (First Revision) |
MTD 34 |
258 |
IS 2000 : Part 9 : 1989 |
Chemical analysis of bauxite: Part 9 determination of magnesium and calcium by atomic absorption spectrophotometric method (First Revision) |
MTD 34 |
259 |
IS 228 : Part 10 : 1989 |
Methods for chemical analysis of steels: Part 10 determination of molybdenum by thiocyanate (Photometric) method in low and high alloy steels (For Molybdenum 0.01 To 1.50 Percent) (First Revision) |
MTD 34 |
260 |
IS 228 : Part 16 : 1992 |
Methods for chemical analysis of steels: Part 16 determination of tungsten by spectrophotometric method (For Tungsten 0.1 To 2 Percent) (Second Revision) |
MTD 34 |
261 |
IS 228 : Part 21 : 2003 |
Methods for chemical analysis of steels: Part 21 determination of copper by spectrophotometric method (For Copper 0.02 To 0.50 Percent) (Second Revision) |
MTD 34 |
262 |
IS 228 : Part 7 : 1990 |
Methods for chemical analysis of steels: Part 7 determination of molybdenum by alpha - Benzoinoxime method in alloy steels (For molybdenum 1 percent and not containing tungsten) (Third Revision) |
MTD 34 |
263 |
IS 8097 : 1976 |
Methods of chemical analysis of soft solders for jointing alumtnium and aluminium alloys |
MTD 34 |
264 |
IS 2600 : Part 3 : 1993 |
Methods of chemical analysis of zinc and zinc base alloys for die castings: Part 3 determination of indium by atomic absorption spectrometric method (First Revision) |
MTD 34 |
265 |
IS 3200 : 2001 |
Chemical analysis of cryolite (Second Revision) |
MTD 34 |
266 |
IS 4027 : Part 7 : 1990 |
Methods of chemical analysis of bronzes: Part 7 determination of antimony by rhodamine B spectrophotometric method (First Revision) |
MTD 34 |
267 |
IS 4027 : Part 8 : 1991 |
Methods of chemical analysis of bronzes: Part 8 determination of iron (First Revision) |
MTD 34 |
268 |
IS 4027 : Part 9 : 1991 |
Methods of chemical analysis of bronzes: Part 9 determination of aluminium by atomic absorption spectrometric method (First Revision) |
MTD 34 |
269 |
IS 504 : Part 1 To 12 : 2002 |
Chemical analysis of aluminium and its alloys parts 1 to 12 (Second Revision) |
MTD 34 |
270 |
IS 15774 : 2018 |
Sponge iron/direct reduced iron (DRI) hot briquette iron (HBI) and cold briquette iron (CBI) for steel making - Specification |
MTD 13 |
271 |
IS 7143 : 1973 |
Specification for crab meat canned in brine |
FAD 12 |
272 |
IS 1682 : 1973 |
Specification for cuprous oxide, technical (Fungicidal Grade) (First Revision) |
FAD 1 |
273 |
IS 1327 : 1988 |
Methods of determination of mass of tin coating on tinplate (Third Revision) |
MTD 24 |
274 |
IS 1359 : 1992 |
Electroplated coatings of tin - Specification (Third Revision) |
MTD 24 |
275 |
IS 2602 : 1989 |
Cadmium anodes for electroplating specification (First Revision) |
MTD 24 |
276 |
IS 13600 : 1992 |
Chemical analysis of silver palladium alloys |
MTD 10 |
277 |
IS 6890 : Part 1 : 1989 |
Chemical analysis of gold alloys dental: Part 1 determination of gold, silver, palladium and platinum (First Revision) |
MTD 10 |
278 |
IS 2113 : 2014 |
Assaying silver in silver and silver alloys - Methods (Third Revision) |
MTD 10 |
279 |
IS 10170 : 1982 |
Specification for byproduct gypsum |
FAD 7 |
280 |
IS 6773 : 2008 |
Sodium silicate for use in foundries - Specification (Second Revision) |
MTD 14 |
281 |
IS 6092 : Part 3 : 1985 |
Methods of sampling and test for fertilizers: Part 3 determination of phosphorus (First Revision) |
FAD 7 |
282 |
IS 6092 : Part 3 : Sec 2 : 2004 |
Methods of sampling and test for fertilizers: Part 3 determination of phosphorus: Sec 2 test methods not covered under dual number standards (Second Revision) |
FAD 7 |
283 |
IS 15733 : 2006 |
Portable kit for quick detection of adulterants/contaminants in common food products - Specification |
FAD 28 |
284 |
IS 8071 : 1976 |
Specification for propanil, technical |
FAD 1 |
285 |
IS 10116 : 2015 |
Boric acid - Specification (First Revision) |
CHD 1 |
286 |
IS 4505 : 2015 |
Sodium formaldehyde sulphoxylate - Specification (First Revision) |
CHD 1 |
287 |
IS 582 : 1970 |
Methods of chemical testing of leather (First Revision) |
CHD 17 |
288 |
IS 15906 : 2010 |
Measurement of mercury level in fluorescent lamps |
ETD 23 |
289 |
IS 5182 : Part 25 : 2018 |
Methods for measurement of air pollution: Part 25 ammonia |
CHD 35 |
290 |
IS 9875 : 2018 |
Lipstick - Specification (Second Revision) |
PCD 19 |
291 |
IS 286 : 2018 |
Methods of sampling and test for soaps (Third Revision) |
CHD 25 |
292 |
IS 16913 : 2018 |
Methods of test for cosmetics - Determination of heavy metals (Arsenic, Cadmium, Lead And Mercury) by atomic absorption spectrometry (Aas) |
PCD 19 |
293 |
IS 11673 : Part 1 : 2019 |
Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
CHD 1 |
294 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
295 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
296 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
297 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
298 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
299 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
300 |
IS 9740 : 2018 |
Shaving cream - Specification (First Revision) |
PCD 19 |
301 |
IS 7123 : 2019 |
Hair oils - Specification (Third Revision) |
PCD 19 |
302 |
IS 17117 : 2019 |
Hair shampoo for babies - Specification |
PCD 19 |
303 |
IS 13840 : 2019 |
Methods of chemical analysis of ferrotitanium (First Revision) |
MTD 34 |
304 |
IS 798 : 2020 |
Orthophosphoric Acid — Specification ( Third Revision ) |
CHD 1 |
305 |
IS 695 : 2020 |
Acetic acid - Specification (Fourth Revision) |
PCD 9 |
306 |
IS 4200 : 2020 |
Sodium Aluminate — Specification ( Second Revision ) |
CHD 1 |
307 |
IS 13452 : 2019 |
Methods of chemical analysis of ferrochromium (First Revision) |
MTD 34 |
308 |
IS 538 : 2020 |
Phenol (carbolic acid) - Specification (Third Revision) |
PCD 9 |
309 |
IS 9908 : 2020 |
Specification for formic acid (First Revision) |
PCD 9 |
310 |
IS 4955 : 2020 |
Household Laundry Detergent Powders — Specification ( Fifth Revision ) |
CHD 25 |
311 |
IS 9749 : 2020 |
Potash Feldspar and Soda Feldspar for Glass and Ceramic Industry — Specification ( Second Revision ) |
CHD 9 |
312 |
IS 869 : 2020 |
Specification for ethylene dichloride (Third Revision) |
PCD 9 |
313 |
IS 1263 : 2020 |
Cocoa Butter — Specification ( Fourth Revision ) |
FAD 6 |
314 |
IS 3025 : Part 4 : 1983 |
Methods of sampling and test (Physical And Chemical) for water and waste water: Part 4 colour (First Revision) |
CHD 36 |
315 |
IS 11464 : 2011 |
Quartz for ceramic industry - Specification (First Revision) |
CHD 9 |
316 |
IS/ISO 105 : PART A04 : 2006 |
Textiles - Tests for colour fastness : Part A04 Method for the instrumental assessment of the degree of staining of adjacent fabrics |
TXD 5 |
317 |
IS 517 : 2020 |
Specification for methanol (methyl alcohol) (Third Revision) |
PCD 9 |
318 |
IS 1448 : Part 120 : 1986 |
Methods of test for petroleum and its products (P: 120) zinc in lubricating oil |
PCD 1 |
319 |
IS 1448 : Part 33 : 1991 |
Methods of test for petroleum and its products [p:33] sulphur by bomb method (Second Revision) |
PCD 1 |
320 |
IS 5182 : Part 7 : 1973 |
Methods for measurement of air pollution: Part 7 hydrogen sulphide |
CHD 35 |
321 |
IS 6356 : 2001 |
Toothpaste - Specification (Third Revision) |
PCD 19 |
322 |
IS 4581 : 1978 |
Specification for phosphorus trichloride, pure and analytical reagent (First Revision) |
CHD 1 |
323 |
IS 5383 : 2006 |
Tooth powder - Specification (Second Revision) |
PCD 19 |
324 |
IS 3077 : 1992 |
Roasted and ground coffee specification (Second Revision) |
FAD 6 |
325 |
IS 11923 : 1986 |
Specification for cocoa mass |
FAD 6 |
326 |
IS 15464 : 2004 |
Anhydrous ethanol for use in automotive fuel - Specification |
PCD 3 |
327 |
IS 17595 : 2021 |
Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method |
TXD 40 |
328 |
IS 2350 : 1963 |
Method for estimation of residual chlorine in cotton textile materials |
TXD 5 |
329 |
IS 6100 : 1984 |
Specification for sodium tripolyphosphate, anhydrous, technical (First Revision) |
CHD 1 |
330 |
IS 1155 : 1968 |
Specification for wheat aita (Second Revision) |
FAD 16 |
331 |
IS 101 : Part 8 : Sec 5 : 1993 |
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 5 : lead restriction test (Third Revision) |
CHD 20 |
332 |
IS 262 : 1982 |
SpecificatlOn for ferrous sulphate, heptahydrate (Second Revision) |
CHD 1 |
333 |
IS 14194 : Part 2 : 2013 |
Radionuclides in environmental samples - Methods of estimation: Part 2 gross alpha activity measurement (First Revision) |
CHD 30 |
334 |
IS 249 : 1979 |
Specification for sodium bichromate, technical (Third Revision) |
CHD 1 |
335 |
IS 1164 : 1986 |
Specification for cocoa powder (Third Revision) |
FAD 6 |
336 |
IS 1781 : 1975 |
Specification for urea, technical (First Revision) |
PCD 9 |
337 |
IS 247 : 1987 |
Specification for sodium sulphite, anhydrous (Fourth Revision) |
CHD 1 |
338 |
IS 376 : 1986 |
Specification for sodium hydroxide, analytical reagent (Third Revision) |
CHD 1 |
339 |
IS 248 : 1987 |
Specification for sodium bisulphite, technical (Sodium Metabisulphite) (Fourth Revision) |
CHD 1 |
340 |
IS 2088 : 1983 |
Methods for determination of arsenic (Second Revision) |
CHD 1 |
341 |
IS 6301 : 2013 |
Basic chromium sulphate (For Tanning) - Specification (First Revision) |
CHD 17 |