| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 2878 : 2004 |
Fire Extinguisher, Carbon Dioxide Type (Portable and Trolley Mounted) -Specification |
CED 22 |
| 2 |
IS 5290 : 1993 |
Landing valves - Specification (Third Revision) |
CED 22 |
| 3 |
IS 11833 : 1986 |
Specification For Dry Powder Fire Extinguisher For Metal Fires |
CED 22 |
| 4 |
IS 13386 : 1992 |
Specification for Fire Extinguisher 50 Litre Capacity , Mechanical Foam Type |
CED 22 |
| 5 |
IS 10658 : 1999 |
Specification for Higher Capacity Dry Powder Fire Extinguisher (Trolley Mounted) |
CED 22 |
| 6 |
IS 11108 : 1984 |
Specification for portable fire extinguishers - Halon 1211 type |
CED 22 |
| 7 |
IS 14951 : 2001 |
Fire extinguisher - 135 litres capacity mechanical foam type - Specification |
CED 22 |
| 8 |
IS 15811 : 2008 |
Long - Range water - Cum - Foam monitor with self - Inducting, aspirating and non - Aspirating jetand spray/fog nozzle for fire fighting - Specification |
CED 22 |
| 9 |
IS 908 : 1975 |
Specification for fire hydrant, stand post type (Second Revision) |
CED 22 |
| 10 |
IS 909 : 1992 |
Underground fire hydrant, sluice valve type - Specification (Third Revision) |
CED 22 |
| 11 |
IS 942 : 1982 |
Functional requirements for 275 1/min portable pump set for fire fighting (Second Revision) |
CED 22 |
| 12 |
IS 943 : 1979 |
Functional Requirements for 680-1/Min Trailer Pump For Fire Brigade Use (Second Revision) |
CED 22 |
| 13 |
IS 4928 : 1986 |
Specification for delivery valve for centrifugal fire pump outlets (First Revision) |
CED 22 |
| 14 |
IS 4862 : Part 1 : 1986 |
Specification for portable fire extinguisher for aircraft: Part 1 halon 1211 type (First Revision) |
CED 22 |
| 15 |
IS 5714 : 1981 |
Specification for hydrant stand - Pipe for fire fighting (First Revision) |
CED 22 |
| 16 |
IS 7278 : 1993 |
Methyl Chloride - Specification (First Revision) |
CHD 6 |
| 17 |
IS 947 : 1985 |
Specification for washers for water fittings for fire fighting purposes (Second Reuision) |
CED 22 |
| 18 |
IS 948 : 1983 |
Functional Requirements for Water Tender Type `A' for Fire Brigade Use (Second Revision) |
CED 22 |
| 19 |
IS 949 : 2012 |
Specification for snatch block for use with fibre rope for fire brigade use (First Revision) |
CED 22 |
| 20 |
IS 950 : 2012 |
Functional requirements for water tender, type B for fire brigade use (Third Revision) |
CED 22 |
| 21 |
IS 957 : 1967 |
Specification for control van for fire brigade use |
CED 22 |
| 22 |
IS 2930 : 1980 |
Functional requirements for hose laying tender for fire brigade use (First Revision) |
CED 22 |
| 23 |
IS 6067 : 1983 |
Functional Requirements for Water Tender Type `X' for Fire Brigade Use (First Revision) |
CED 22 |
| 24 |
IS 6026 : 1985 |
Specification for hand - Operated sirens (First Revision) |
CED 22 |
| 25 |
IS 15528 : 2004 |
Gaseous fire extinguishing systems - Carbon dioxide total flooding and local application (Sub - Floor And In - Cabinet), high and low pressure (Refrigerated) systems |
CED 22 |
| 26 |
IS 2888 : 2004 |
Toilet soap - Specification (Third Revision) |
CHD 25 |
| 27 |
IS 3196 : Part 1 : 2013 |
Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision) |
MED 16 |
| 28 |
IS 13258 : 2014 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision) |
MED 16 |
| 29 |
IS 3844 : 1989 |
Code of practice for installation and maintenance of internal fire hydrants and hose reels on premises (First Revision) |
CED 22 |
| 30 |
IS 941 : 1985 |
Specification for blower and exhauster - For fire fighting (Second Revision) |
CED 22 |
| 31 |
IS 944 : 1979 |
Functional requirements of 1800-1/min trailer pump for fire brigade use (Second Revision) |
CED 22 |
| 32 |
IS 955 : 1980 |
Functional requirements for dry powder tender for fire brigade use (First Revision) |
CED 22 |
| 33 |
IS 13045 : 1991 |
Code of Practice for Fire Safety of Industrial Buildings : Flour Mills |
CED 36 |
| 34 |
IS 6893 : Part 1 : 1988 |
Proforma for purchase Specification for machine tools: Part 1 general purpose parallel lathes and precision lathes (First Revision) |
PGD 35 |
| 35 |
IS 6893 : Part 3 : 1988 |
Proforma for purchase Specification for machine tools: Part 3 radial drilling machines (First Revision) |
PGD 35 |
| 36 |
IS 6893 : Part 4 : 1987 |
Proforma for purchase Specification for machine tools: Part 4 vertical turning and boring lathes (First Revision) |
PGD 35 |
| 37 |
IS 6893 : Part 5 : 1987 |
Proforma for purchase Specification for machine tools: Part 5 milling machine with table of variable height with vertical spindle (First Revision) |
PGD 35 |
| 38 |
IS 6893 : Part 6 : 1985 |
Proforma for purchase Specification for machine tools: Part 6 bench/pillar type drilling machines |
PGD 35 |
| 39 |
IS 6893 : Part 10 : 1992 |
Proforma for purchase Specification for machine tools: Part 10 copying lathes |
PGD 35 |
| 40 |
IS 6893 : Part 12 : 1992 |
Proforma for purchase Specification for machine tools: Part 12 horizontal boring and milling machines (Table Type) |
PGD 35 |
| 41 |
IS 10949 : 1984 |
Code of practice for painting procedure for machine tools |
PGD 35 |
| 42 |
IS 11372 : 1985 |
Proforma for purchase specification and technical features for belt drop hammers |
PGD 4 |
| 43 |
IS 12984 : 1990 |
Proforma for puruchase specification for plate bending machines |
PGD 4 |
| 44 |
IS 16175 : 2014 |
Periodic inspection and requalification - Liquefied petroleum gas (LPG) cylinders for automotive use - Code of practice |
MED 16 |
| 45 |
IS 9457 : 2005 |
Safety colours and safety signs - Code of practice (First Revision) |
CHD 8 |
| 46 |
IS 14947 : 2001 |
Enamel synthetic, oil resistant, air drying - Specification |
CHD 20 |
| 47 |
IS 140 : 2015 |
Ready mixed paint, exterior, petrol resisting, air drying - Specification (Second Revision) |
CHD 20 |
| 48 |
IS 151 : 2017 |
Ready mixed paint, spraying, finishing, stoving, enamel for general purposes, colour as required - Specification (Second Revision) |
CHD 20 |
| 49 |
IS 133 : 2004 |
Enamel, Interior : (a) Undercoating (b) Finishing |
CHD 20 |
| 50 |
IS 9034 : 2018 |
Enamel, synthetic, exterior, air drying, for use on primed surfaces of motor vehicles and other equipment - Specification (First Revision) |
CHD 20 |
| 51 |
IS 2933 : 2013 |
Enamel exterior (a) undercoating, (b) finishing |
CHD 20 |
| 52 |
IS 2933 : Part 1 : 2013 |
Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision) |
CHD 20 |
| 53 |
IS 2932 : 2003 |
Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing |
CHD 20 |
| 54 |
IS 2932 : 2013 |
Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification : Part 1 For domestic and decorative applcations (Fourth Revision) |
CHD 20 |
| 55 |
IS 6680 : 1992 |
Railway carriagefans - Specification (First Revision) |
ETD 32 |
| 56 |
IS 50 : 1980 |
Withdrawl |
CHD 21 |
| 57 |
IS 12349 : 1988 |
Fire protection-safety signs |
CED 36 |
| 58 |
IS 9404 : 2002 |
Identification of pipeline used in thermal power plants - Colour code (First Revision) |
MED 1 |
| 59 |
IS 11496 : 1985 |
General and performance test requirements of pallet truck and stillage truck |
MED 7 |
| 60 |
IS 1260 : Part 1 : 1973 |
Pictorial Marking for Handling and Labelling of Goods: Part 1 Dangerous Goods (First Revision) |
TED 24 |
| 61 |
IS 14578 : 1999 |
Three - Phase induction motors for use in nuclear power plants - Specification |
ETD 15 |
| 62 |
IS 8150 : 1997 |
Shipbuilding - 45 Litre Capacity Chemical Foam Type Fire Engine, for Marine Use |
TED 19 |
| 63 |
IS 3947 : 1994 |
Shipbuilding - Testing, installation and maintenance of marine portable fire appliances - Code of practice (First Revision) |
TED 19 |
| 64 |
IS 10858 : 1984 |
Identification painting and inscription code for pilot craft |
TED 18 |
| 65 |
IS 6190 : 1971 |
Specification for anaesthetic face masks |
MHD 11 |
| 66 |
IS 6207 : 1971 |
Specification for trolleys for oxygen cylinders |
MHD 11 |
| 67 |
IS 13313 : 1991 |
Automotive vehicles - Electrical wiring - Colour coding |
TED 11 |
| 68 |
IS 9423 : 1980 |
Identification colours for schemes for ships' ventilation systems |
TED 17 |
| 69 |
IS 9204 : 1979 |
Marking of servicing, maint - Enance, ground handling and safety/hazard points on aircraft |
TED 14 |
| 70 |
IS 8983 : 2018 |
Ready mixed paint, finishing, stoving for war equipment - Specification (First Revision) |
CHD 20 |
| 71 |
IS 8982 : 2019 |
Ready mixed paint, finishing, air-drying for war equipment - Specification (Second Revision) |
CHD 20 |
| 72 |
IS 17082 : 2019 |
Guidelines for Design and Construction of Continuous Pusher Type Oil / Gas Top Fired Reheating Furnaces |
MTD 26 |
| 73 |
IS 4989 : 2018 |
Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision) |
CED 22 |
| 74 |
IS 3933 : 1966 |
Colour identification of gas cylinders and related equipment intended for medical use |
MED 16 |
| 75 |
IS 139 : 2018 |
Ready mixed paint, marking, quick drying, for marking with rubber stamps - Specification (Third Revision) |
CHD 20 |
| 76 |
IS 4379 : 1981 |
Identification of the contents of industrial gas cylinders (First Revision) |
MED 16 |
| 77 |
IS 13673 : Part 2 : 2021 |
Expression of Performance of Electrochemical Analyzers Part 2 pH Value ( First Revision ) |
ETD 18 |
| 78 |
IS 17741 : 2021 |
Minimizing the risk of human DNA contamination in products used to collect store and analyze biological material for forensic purposes Requirements |
MHD 23 |
| 79 |
IS 164 : 2015 |
Ready mixed paint for road marking - Specification (Second Revision) |
CHD 20 |
| 80 |
IS 13811 : 1993 |
Air cargo (Bulk) trolley - Specification |
MED 7 |
| 81 |
IS 8016 : 1996 |
Hand trolley for gas cylinders (Oxygen And Dissolved Acetylene) for industrial use - Specification (First Revision) |
MED 7 |
| 82 |
IS 8049 : 1988 |
Specification for platform trucks |
MED 7 |
| 83 |
IS 14130 : 1994 |
Hydraulic lifting table - Specification |
MED 7 |
| 84 |
IS 11054 : 1984 |
Specification for nylon blue airmail bags |
TXD 20 |
| 85 |
IS 133 : Part 1 : 2013 |
Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision) |
CHD 20 |
| 86 |
IS 5324 : 1996 |
Hand - Operated stillage truck - Lifting truck (Hand Elevating) - Specification (Second Revision) |
MED 7 |
| 87 |
IS 11954 : 1987 |
Guide for colour coding of electrical mimic diagrams |
ETD 1 |
| 88 |
IS 8662 : 2004 |
Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision) |
CHD 20 |
| 89 |
IS 1513 : 1980 |
Specification for wooden pattern equipment for foundries (Second Revision) |
MTD 14 |
| 90 |
IS 701 : 1966 |
Specification for zinc chloride (Revised) |
CHD 1 |
| 91 |
IS 159 : 1981 |
Specification for ready mixed paint, brushing, acid resisting (First Revision) |
CHD 20 |
| 92 |
IS 168 : 2016 |
Ready mixed paint, air drying for general purpose - Specification (Fourth Revision) |
CHD 20 |
| 93 |
IS 5691 : 1970 |
Specification for lacquer, cellulose nitrate, pigmented, finishing, glossy |
CHD 20 |
| 94 |
IS 8442 : 2008 |
Stand post type water and foam monitor for fire fighting - Specification (First Revision) |
CED 22 |
| 95 |
IS 2379 : 1990 |
Pipelines - Identification - Colour code (First Revision) |
MED 17 |
