Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Group : Heat treatment, metallography and testing )
Total Standards : 323
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10052 : Part 1 : Sec 1 : 2021/ISO 23156 : 2021 (4 Revision) |
Radio Disturbance and Immunity Measuring Apparatus and Methods Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 1 Measuring apparatus Third Revision | 0 | Mar, 2023 | Buy | |
| 2 | IS 10138 : 2010 (2 Revision) |
Macroscopic methods for determination of non-metallic inclusion content in wrought steels (Second Revision) | 0 | Mar, 2022 | Download | |
| 3 | IS 10166 : 1982 |
Method for calibration of standardized test block for verification of scleroscope hardness testing equipments | 0 | Mar, 2022 | Download | |
| 4 | IS 10167 : 1982 |
Method for upsetting test on metallic materials | 0 | Mar, 2022 | Download | |
| 5 | IS 10175 : 2018/ISO 20482 : 2013 (1 Revision) |
Metallic materials - Sheet and strip - Erichsen cupping test (Third Revision) | 0 | Aug, 2023 | Buy | |
| 6 | IS 10180 : 1982 |
Method for plane strain fracture toughness testing of metals | 0 | Mar, 2022 | Download | |
| 7 | IS 10181 : 1982 |
Method for determination of magnetic permeability of iron and steel | 0 | Mar, 2022 | Download | |
| 8 | IS 1047 : 1965 |
Methods of chemical analysis of antimony (Revised) | 0 | Mar, 2021 | Download | |
| 9 | IS 10543 : 1983 |
Method for dry powder magnetic particle testing | 0 | Feb, 2020 | Download | |
| 10 | IS 10636 : Part 1 : 1983 |
Methods for measurement of abrasive wear properties of metallic material: Part 1 test method for gouging abrasion resistance (Jaw Crusher Test) | 0 | Mar, 2022 | Download | |
| 11 | IS 10636 : Part 2 : 1983 |
Method for measurement of abrasive wear properties of metalliC material: Part 2 test method for high stress abrasion | 0 | Mar, 2022 | Download | |
| 12 | IS 10636 : Part 3 : 1983 |
Methods for measurement of abrasive wear properties of metallic material: Part 3 test methods for low stress abrasion | 0 | Mar, 2022 | Download | |
| 13 | IS 10801 : 1984 |
Recommended procedure for heat treatment of welded fabrication | 0 | Mar, 2021 | Download | |
| 14 | IS 11083 : 1984 |
Method for evaluation of friction and wear properties of materials against steel surface | 0 | Mar, 2022 | Download | |
| 15 | IS 11240 : 1985 |
Method for falling weight test on metallic materials | 0 | Mar, 2022 | Download | |
| 16 | IS 11284 : 1985 |
Rotary tube test for iron bearing materials for the manufacture of sponge iron/direct reduced iron(DRI) | 1 | Mar, 2021 | Download | |
| 17 | IS 11612 : 2004 (1 Revision) |
Code of practice for eddy current testing of non-ferrous seamless pipes and tubes (First Revision) | 0 | Feb, 2020 | Download | |
| 18 | IS 11626 : 2005 |
Recommended practice for ultrasonic testing and acceptance for plain carbon and low alloy forging quality steel blooms (First Revision) | 0 | Feb, 2020 | Download | |
| 19 | IS 11630 : 2005 |
Method for ultrasonic testing of steel plates for pressure vessels and special applications (First Revision) | 0 | Feb, 2020 | Download | |
| 20 | IS 11655 : 1986 |
Procedure for stray flux testing of ferrous magnetic seamless steel tubular products | 0 | Feb, 2020 | Download | |
| 21 | IS 1182 : 1983 (2 Revision) |
Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision) | 0 | Feb, 2020 | Download | |
| 22 | IS 12147 : 2013 (1 Revision) |
Recommended practice for wet magnetic particle examination (First Revision) | 0 | Feb, 2020 | Download | |
| 23 | IS 12148 : 1987 |
Guidelines for requirements of non-destructive testing agencies | 0 | Feb, 2020 | Download | |
| 24 | IS 12260 : 2018/ISO 8495 : 2013 (1 Revision) |
Metallic Materials - Tube - Ring - Expanding test (First Revision) | 0 | Aug, 2023 | Buy | |
| 25 | IS 12261 : 1987 |
Method for reverse torsion test for metallic wire | 0 | Feb, 2020 | Download | |
| 26 | IS 12278 : 2018/ISO 8496 : 2013 (2 Revision) |
Metallic Materials - Tube - Ring tensile test (Second Revision) | 0 | Aug, 2023 | Buy | |
| 27 | IS 12308 : Part 1 : 1987 |
Methods for chemical analysis of cast iron and pig iron: Part 1 determination of total carbon by thermal conductivity method (For Carbon 1.00 To 4.50 Percent) | 0 | Mar, 2023 | Download | |
| 28 | IS 12308 : Part 2 : 1987 |
Methods for chemical analysis of cast iron and pig iron: Part 2 determination of sulphur by iodimetric titration after combustion (For Sulphur 0.005 To 0.25 Percent) | 0 | Mar, 2023 | Download | |
| 29 | IS 12308 : Part 3 : 1987 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 3 Determination of manganese by periodic spectrophotometric method (for manganese 0.1 to 2.5 percent) | 0 | Mar, 2023 | Download | |
| 30 | IS 12308 : Part 4 : 1988 |
Methods for chemical analysis of cast iron and pig iron: Part 4 determination of total carbon, graphitic carbon and combined carbon by gravimetric method | 0 | Dec, 2023 | Download | |
| 31 | IS 12308 : Part 5 : 1991 |
Methods of chemical analysis of cast iron and pigiron: Part 5 determination of phosphorus (0.01 To 0.50 Percent) by alkalimetric method | 0 | Mar, 2023 | Download | |
| 32 | IS 12308 : Part 6 : 1991 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 6 Determination of silicon by gravimetric method (for silicon 0.1 to 6.0 percent) | 0 | Mar, 2023 | Download | |
| 33 | IS 12308 : Part 7 : 1991 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 7 Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent) | 0 | Mar, 2023 | Download | |
| 34 | IS 12308 : Part 8 : 1997 |
Method for chemical analysis of cast iron and pig iron: Part 8 determination of chromium by persulphate oxidation method (For Chromium 0.1 To 28 Percent) | 0 | Mar, 2023 | Download | |
| 35 | IS 12308 : Part 9 : 1993 |
Methods for chemical analysis of cast iron and pig iron: Part 9 determination of molybdenum by thiocyanate (Spectrometric) method (For Molybdenum 0.01 To 1.0 Percent) | 0 | Dec, 2023 | Download | |
| 36 | IS 12308 : Part 10 : 1991 |
Methods of chemical analysis of cast iron and pig iron: Part 10 determination of manganese (Up To 7.0 Percent) by arsenite (Volumetric) method | 0 | Mar, 2023 | Download | |
| 37 | IS 12308 : Part 11 : 1991 |
Methods for chemical analysis of castir on and pigiron: Part 11 determination of total carbon by the direct combustion volumetric method (For Carbon 1.50 To 4.50 Percent) | 0 | Mar, 2023 | Download | |
| 38 | IS 12308 : Part 12 : 1992 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 12 Determination of copper by atomic absorption spectrometric method (for copper 0.01 to 0.5 percent) | 0 | Mar, 2023 | Download | |
| 39 | IS 12308 : Part 13 : 1992 |
Methods of chemical analysis of castiron and pigiron: Part 13 determination of magnesium by atomic absorption spectrometric method (For Magnesium Upto 0.1 Percent) | 0 | Mar, 2023 | Download | |
| 40 | IS 12308 : Part 14 : 1993 |
Methods of chemical analysis of cast iron and pig iron: Part 14 determination of titanium by hydrogen peroxide (Spectrophotometric) method (For Titanium Up To 0.25 Percent) | 0 | Dec, 2023 | Download | |
| 41 | IS 12366 : 1988 |
Recommended practice for heat treatment of titanium and titanium alloys | 0 | Mar, 2023 | Download | |
| 42 | IS 12378 : 1988 |
Method for macroetch test for titanium alloys | 0 | Mar, 2023 | Download | |
| 43 | IS 1248 : Part 3 : 2021/ISO 13314 : 2011 (4 Revision) |
Direct Acting Indicating Analogue Electrical Measuring Instruments and their Accessories Part 3 Special Requirements for Wattmeters and Varmeters ( Fourth Revision ) | 0 | ---- | Buy | |
| 44 | IS 12573 : 2010 (1 Revision) |
Method for macroetch test for wrought aluminium and aluminium alloy products (First Revision) | 0 | Mar, 2022 | Download | |
| 45 | IS 12614 : Part 1 : 1988 |
Methods of chemical analysis of ferromolybdenum: Part 1determination of molybdenum | 0 | Dec, 2023 | Download | |
| 46 | IS 12614 : Part 2 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 2 determination of total carbon | 0 | Dec, 2023 | Download | |
| 47 | IS 12614 : Part 3 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 3 determination of silicon | 0 | Dec, 2023 | Download | |
| 48 | IS 12614 : Part 4 : 1988 |
Methods of chemical analysisof ferro-molybdenum: Part 4 determination of sulphur | 0 | Dec, 2023 | Download | |
| 49 | IS 12614 : Part 5 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 5 determination of phosphorus | 0 | Dec, 2023 | Download | |
| 50 | IS 12614 : Part 6 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 6 determination of copper | 0 | Dec, 2023 | Download | |
| 51 | IS 12614 : Part 7 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 7 determination of aluminium | 0 | Dec, 2023 | Download | |
| 52 | IS/ISO 12619 : Part 10 : 2017/ISO 15653:2018 |
ROAD VEHICLES COMPRESSED GASEOUS HYDROGEN CGH2 AND HYDROGEN NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS PRESSURE RELIEF DEVICE PRD | 0 | ---- | Buy | |
| 53 | IS 12666 : 2018 (1 Revision) |
Performance assessment of ultrasonic flaw detection equipment (First Revision) | 0 | Mar, 2024 | Download | |
| 54 | IS 12710 : 1989 |
Acoustic emission testing - Glossary of terms | 0 | Feb, 2020 | Download | |
| 55 | IS 12782 : 1989 |
Guidelines for using thermography for monitoring of industrial components | 0 | Feb, 2020 | Download | |
| 56 | IS 12860 : 1989 |
Metallic coating thickness by X-ray fluorescence technique method - Determination | 0 | Feb, 2020 | Download | |
| 57 | IS 12889 : 2018 (1 Revision) |
Performance evaluation of materials used for liquid penetrant test (First Revision) | 0 | Mar, 2024 | Download | |
| 58 | IS 12965 : 1990 |
Glossary of terms used in electro magnetic (Eddy Current) testing | 0 | Feb, 2020 | Download | |
| 59 | IS 13190 : 1991 |
Recommended practice for eddy current examination by rotating probe method of round steel bars | 0 | Feb, 2020 | Download | |
| 60 | IS 13237 : 1991 |
Metallic foil - Tension testing | 0 | Feb, 2020 | Download | |
| 61 | IS 13452 : 2019 |
Methods of chemical analysis of ferrochromium (First Revision) | 0 | Feb, 2024 | Download | |
| 62 | IS 13605 : 1992 |
Method for macroetch test for zinc and zinc alloys | 0 | Feb, 2023 | Download | |
| 63 | IS 13655 : 1993 |
Guidelines for heat treatment of cast iron | 0 | Mar, 2023 | Download | |
| 64 | IS 13691 : 1993/ISO 4970:1979 |
Steel - Determination of total or effective thickness of thin surface - Hardened layers | 0 | Mar, 2023 | Buy | |
| 65 | IS 13805 : 2004 (1 Revision) |
General standard for qualification and certification of non - Destructive testing personnel - Specification (First Revision) | 1 | Feb, 2020 | Download | |
| 66 | IS 13938 : Part 1 : 1994 |
Chemical analysis of ferromanganese: Part 1 determination of silicon by gravimetric method | 0 | Dec, 2023 | Download | |
| 67 | IS 13938 : Part 3 : 1993 |
Chemical analysis of ferromanganese: Part 3 determination of phosphorus by (Alkalimetric) method | 0 | Dec, 2023 | Download | |
| 68 | IS 13938 : Part 4 : 1994 |
Chemical analysis of ferromanganese: Part 4 determination of total sulphur by direct combustion method | 0 | Dec, 2023 | Download | |
| 69 | IS 13963 : Part 1 : 1994 |
Chemical analysis of cadmium metal: Part 1 determination of copper, zinc, lead and iron | 0 | Mar, 2019 | Download | |
| 70 | IS 13963 : Part 2 : 1994 |
Chemical analysis of cadmium metal: Part 2 determination of nickel, arsenic antimony and thallium by spectrophotometric methods | 0 | Mar, 2019 | Download | |
| 71 | IS 1403 : Part 1 : 1993/ISO 7799:1985 (2 Revision) |
Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test | 1 | Feb, 2020 | Buy | |
| 72 | IS 1409 : 1959 |
Methods of chemical analysis of antifriction bearing alloys | 0 | Mar, 2021 | Download | |
| 73 | IS 14245 : 1995 |
Protective atmosphere for heat treatment furnaces - Recommendations | 0 | Mar, 2023 | Download | |
| 74 | IS 1448 : Part 183 : 2021/ISO 20032 : 2013 |
Methods of test for petroleum and its part 183 Petroleum and related Products -Determination of wick flame persistence of fire-resistant Fluids | 0 | ---- | Buy | |
| 75 | IS 14529 : 2004 |
Chemical analysis of ferrosilicon - Magnesium alloy (First Revision) | 0 | Mar, 2022 | Download | |
| 76 | IS 14598 : 1998 |
Heat treatment of maraging steel - Code of practice | 0 | Feb, 2023 | Download | |
| 77 | IS 14644 : Part 1 : 2020/ISO 7530-1-1:1990 (1 Revision) |
Nickel Alloys — Flame Atomic Absorption Sepctrometric Analysis Part 1 Determination of Cobalt, Chromium, Copper, Iron and Manganese ( First Revision ) | 0 | ---- | Buy | |
| 78 | IS 14644 : Part 7 : 2000/ISO 7530 -7:1992 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 7 determination of aluminium content | 0 | Mar, 2022 | Buy | |
| 79 | IS 14644 : Part 8 : 2000/ISO 7530-8:1992 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 8 determination of silicon content | 0 | Mar, 2022 | Buy | |
| 80 | IS 14644 : Part 9 : 2000/ISO 7530-9:1993 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 9 determination of vanadium content | 0 | Mar, 2022 | Buy | |
| 81 | IS 14669 : 1999 |
Thermal neutron radiography - Recommended practices | 0 | Feb, 2020 | Download | |
| 82 | IS 14670 : 1999 |
Recommended practice for acoustic emission inspection during hydrostatic pressure testing of system | 0 | Feb, 2020 | Download | |
| 83 | IS 14719 : 1999 |
Density of hot briquetted iron (HBI) - Method for determination | 1 | Mar, 2021 | Download | |
| 84 | IS 1473 : 2004 (1 Revision) |
Methods of chemical analysis of manganese ores (First Revision) | 0 | Mar, 2021 | Download | |
| 85 | IS 14800 : 2000 |
Recommended practice for sorting of ferrous/non - Ferrous materials using electromagnetic (Eddy Current) technique | 0 | Feb, 2020 | Download | |
| 86 | IS 1500 : Part 1 : 2019/ISO 6506-1 : 2014 (5 Revision) |
Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision) | 0 | Jan, 2024 | Buy | |
| 87 | IS 1500 : Part 3 : 2019/ISO 6506-3 : 2014 (5 Revision) |
Metallic materials - Brinell hardness test: Part 3 calibration of reference blocks (Fifth Revision) | 0 | Jan, 2024 | Buy | |
| 88 | IS 1500 : Part 4 : 2019/ISO 6506-4 : 2014 (5 Revision) |
Metallic materials - Brinell hardness test: Part 4 table of hardness values (Fifth Revision) | 0 | Jan, 2024 | Buy | |
| 89 | IS 1501 : Part 1 : 2020/ISO 6507-1:2018 (5 Revision) |
Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision ) | 0 | ---- | Buy | |
| 90 | IS 1501 : Part 2 : 2020/ISO 6507-2 : 2018 (5 Revision) |
Metallic Materials — Vickers Hardness Test Part 2 Verification and Calibration of Testing Machines ( Fifth Revision ) | 0 | ---- | Buy | |
| 91 | IS 1501 : Part 3 : 2020/ISO 6507-3 : 2018 (5 Revision) |
Metallic Materials — Vickers Hardness Test Part 3 Calibration of Reference Blocks ( Fifth Revision ) | 0 | ---- | Buy | |
| 92 | IS 1501 : Part 4 : 2020/ISO 6507-4 : 2018 (5 Revision) |
Metallic Materials — Vickers Hardness Test Part 4 Tables of Hardness Values ( Fifth Revision ) | 0 | ---- | Buy | |
| 93 | IS 15326 : Part 3 : 2022/ISO 11531 : 2022 (2 Revision) |
Quality requirements for fusion welding of metallic materials: Part 3 standard quality requirements Second Revision | 0 | ---- | Buy | |
| 94 | IS 15338 : 2003 |
Spectrometric analysis of cast iron by direct reading optical emission vacuum spectrometer - Point to plane technique | 0 | Mar, 2023 | Download | |
| 95 | IS 15396 : 2003 |
Chemical analysis of ferro - Silicon zirconium alloys | 0 | Mar, 2022 | Download | |
| 96 | IS 15404 : 2003 |
Recommended practice for measuring ultrasonic velocity in materials | 0 | Feb, 2020 | Download | |
| 97 | IS 15420 : 2003 |
Metallic materials - Charpy pendulum impact test - Preparation and characterization of charpy V reference test pieces for verification of test machines | 0 | Mar, 2021 | Download | |
| 98 | IS 15426 : 2004/ISO 14250:2000 |
Steel - Metallographic characterization of duplex grain size and distributions | 0 | Mar, 2022 | Buy | |
| 99 | IS 15435 : 2003 |
Recommended practice for measuring thickness using ultrasonic method | 0 | Feb, 2020 | Download | |
| 100 | IS 15452 : 2004 |
Recommended practice for flaw sizing by ultrasonic DGS method | 0 | Feb, 2020 | Download | |
| 101 | IS 15468 : 2004 |
Performance evaluation of ultrasonic thickness gauges | 0 | Feb, 2020 | Download | |
| 102 | IS 15531 : 2004 |
Recommended practice for ultrasonic testing of weld fillets of non-linear joints | 0 | Feb, 2020 | Download | |
| 103 | IS 15539 : 2004 |
Recommended practice for magnetic particle examination of steam turbine rotor blades | 0 | Feb, 2020 | Download | |
| 104 | IS 15540 : 2004 |
Recommended practice for eddy current testing of installed non-ferromagnetic heat exchanger tubing using dual frequency method | 0 | Feb, 2020 | Download | |
| 105 | IS 1559 : 1961 |
Methods of chemical analysis of ferro - Alloys | 0 | Mar, 2023 | Download | |
| 106 | IS 1559 : Part 1 : 1988 (2 Revision) |
Methods of chemical analysis of ferro - Silicon: Part 1 determination of silicon (Second Revision) | 0 | Mar, 2024 | Download | |
| 107 | IS 1559 : Part 2 : 1982 (1 Revision) |
Methods of chemical analysis of ferrosilicon: Part 2 determination of carbon (First Revision | 0 | Mar, 2023 | Download | |
| 108 | IS 1559 : Part 3 : 1982 (1 Revision) |
Methods of chemical analysis of ferrosilicon: Part 3 determination of sulphur (First Revision) | 0 | Mar, 2023 | Download | |
| 109 | IS 1559 : Part 4 : 1982 (1 Revision) |
Methods of chemical analysis of ferrosilicon: Part 4 determination of phosphorus (First Revision) | 0 | Mar, 2023 | Download | |
| 110 | IS 1559 : Part 5 : 2003 (2 Revision) |
Chemical analysis of ferrosilicon: Part 5 determination of aluminium in ferrosilicon (Aluminnjm 0.05 To 1.75 Percent) (Second Revision) | 0 | Feb, 2024 | Download | |
| 111 | IS 1559 : Part 6 : 1982 (1 Revision) |
Methods of chemical analysis of ferrosilicon: Part 6 determination of calcium (First Rivision) | 0 | Mar, 2023 | Download | |
| 112 | IS 1559 : Part 7 : 1982 (1 Revision) |
Methods of chemical analysis of ferrosilicon: Part 7 determination of manganese (First Revision) | 0 | Mar, 2023 | Download | |
| 113 | IS 15643 : 2006 |
Non - Destructive examination of polymer based composite materials - Code of practice | 0 | Feb, 2020 | Download | |
| 114 | IS 15775 : 2008 |
Glossary of terms for signal analysis related to non-destructive testing | 0 | Feb, 2020 | Download | |
| 115 | IS 1586 : Part 1 : 2018/ISO 6508-1 : 2016 (5 Revision) |
Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision) | 0 | May, 2023 | Buy | |
| 116 | IS 1586 : Part 2 : 2018/ISO 6508-2:2015 (5 Revision) |
Metallic materials - Rockwell hardness test: Part 2 verification and calibration of testing machines and indenters (Fifth Revision) | 0 | May, 2023 | Buy | |
| 117 | IS 1598 : 1977 (1 Revision) |
Method for izod impact test of metals (First Revision) | 0 | Feb, 2020 | Download | |
| 118 | IS 15987 : 2013 |
Non - Destructive testing of concrete structures using impact - Echo technique - Recommended practice | 0 | Feb, 2020 | Download | |
| 119 | IS 1608 : Part 2 : 2020/ISO 6892-2:2018 |
Metallic Materials - Tensile Testing Part 2 Method of Test at Elevated Temperature ( Fourth Revision ) | 0 | ---- | Buy | |
| 120 | IS 1608 : Part 3 : 2018/6892-3:2015 |
Metallic materials - Tensile testing: Part 3 method of test at low temperature | 0 | Aug, 2023 | Buy | |
| 121 | IS 16168 : 2014 |
Guidelines for infrared thermography inspection of electrical installations | 0 | Feb, 2020 | Download | |
| 122 | IS 16843 : 2018/ISO 12111:2011 |
Metallic materials - Fatigue testing - Strain - Controlled thermomechanical fatigue testing method | 0 | Nov, 2023 | Buy | |
| 123 | IS 17069 : Part 1 : 2019/ISO 14096-1:2005 |
Non - Destructive testing - Qualification of radiographic film digitization systems: Part 1 definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control | 0 | Mar, 2024 | Buy | |
| 124 | IS 17069 : Part 2 : 2019/ISO 14096-2 : 2005 |
Non - Destructive testing - Qualification of radiographic film digitization systems: Part 2 minimum requirements | 0 | Mar, 2024 | Buy | |
| 125 | IS 17144 : Part 1 : 2019/ISO 14577-1 : 2015 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 1 test method | 0 | Jan, 2024 | Buy | |
| 126 | IS 17144 : Part 2 : 2019/ISO 14577-2 : 2015 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 2 verification and calibration of testing machines | 0 | Jan, 2024 | Buy | |
| 127 | IS 17144 : Part 3 : 2019/ISO 14577-3 : 2015 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 3 calibration of reference blocks | 0 | Jan, 2024 | Buy | |
| 128 | IS 17144 : Part 4 : 2019/ISO 14577-4 : 2016 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 4 test method for metallic and Non - Metallic coatings | 0 | Jan, 2024 | Buy | |
| 129 | IS 17145 : Part 1 : 2019/ISO 12110-1 : 2013 |
Metallic materials - Fatigue testing - Variable amplitude fatigue testing: Part 1 general principles, test method and reporting requirements | 0 | Jan, 2024 | Buy | |
| 130 | IS 17145 : Part 2 : 2019/ISO 12110-2 : 2013 |
Metallic materials - Fatigue testing - Variable amplitude fatigue testing: Part 2 cycle counting and related data reduction methods | 0 | Jan, 2024 | Buy | |
| 131 | IS 17147 : 2019/ISO 12107 : 2012 |
Metallic materials - Fatigue testing - Statistical planning and analysis of data | 0 | Jan, 2024 | Buy | |
| 132 | IS 17149 : Part 1 : 2019/ISO 16859-1 : 2015 |
Metallic materials - Leeb hardness test: Part 1 test method | 0 | Jan, 2024 | Buy | |
| 133 | IS 17149 : Part 2 : 2019/ISO 16859-2 : 2015 |
Metallic materials - Leeb hardness test: Part 2 verification and calibration of the testing devices | 0 | Jan, 2024 | Buy | |
| 134 | IS 17149 : Part 3 : 2019/ISO 16859-3 : 2015 |
Metallic materials - Leeb hardness test: Part 3 calibration of reference test blocks | 0 | Jan, 2024 | Buy | |
| 135 | IS 1717 : 2018/ISO 7800 : 2012 (4 Revision) |
Metallic materials - Wire - Simple torsion test (Fourth Revision) | 0 | Aug, 2023 | Buy | |
| 136 | IS 17174 : 2020/ISO 16574:2015 |
Determination of Percentage of Resolvable Pearlite in High Carbon Steel Wire Rod | 0 | ---- | Buy | |
| 137 | IS 17175 : 2020/ISO 16573:2015 |
Steel — Measurement Method for the Evaluation of Hydrogen Embrittlement Resistance of High Strength Steels | 0 | ---- | Buy | |
| 138 | IS 17181 : 2020 |
Remote Field Eddy Current Testing of Steam Generator and Heat Exchanger Tubes | 0 | ---- | Download | |
| 139 | IS 17319 : 2020/ISO 6352 : 1985 |
Ferronickel — Determination of Nickel Content — Dimethylglyoxime Gravimetric Method | 0 | ---- | Buy | |
| 140 | IS 17320 : 2020/ISO 11400 |
Nickel, Ferronickel and Nickel Alloys — Determination of Phosphorus Content — Phosphovanadomolybdate Molecular Absorption Spectrometric Method | 0 | ---- | Buy | |
| 141 | IS 17321 : 2020/ISO 8343 : 1985 |
Ferronickel — Determination of Silicon Content — Gravimetric Method | 0 | ---- | Buy | |
| 142 | IS 17322 : 2020/ISO 7527 : 1985 |
Nickel, Ferronickel and Nickel Alloys — Determination of Sulfur Content — Iodimetric Titration Method after Induction Furnace Combustion | 0 | ---- | Buy | |
| 143 | IS 17323 : 2020/ISO 7526 : 1985 |
Nickel, Ferronickel and Nickel Alloys — Determination of Sulfur Content — Infra-Red Absorption Method After Induction Furnace Combustion | 0 | ---- | Buy | |
| 144 | IS 17324 : 2020/ISO 7524 : 1985 |
Nickel, Ferronickel and Nickel Alloys — Determination of Carbon Content — Infra-Red Absorption Method after Induction Furnace Combustion | 0 | ---- | Buy | |
| 145 | IS 17325 : 2020/ISO 7520 |
Ferronickel — Determination of Cobalt Content — Flame Atomic Absorption Spectrometric Method | 0 | ---- | Buy | |
| 146 | IS 17413 : Part 1 : 2020/ISO 26203-1:2018 |
Metallic Materials - Tensile Testing at High Strain Rates Part 1 Elastic-Bar-Type Systems | 0 | ---- | Buy | |
| 147 | IS 17413 : Part 2 : 2020/ 26203-2:2011 |
Metallic Materials - Tensile Testing at High Strain Rates Part 2 Servo-Hydraulic and Other Systems | 0 | ---- | Buy | |
| 148 | IS 17414 : 2020/ISO 16630:2017 |
Metallic Materials — Sheet and Strip — Hole Expanding Test | 0 | ---- | Buy | |
| 149 | IS 17417 : Part 1 : 2020/ISO 4965-1:2012 |
Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 1 Testing Systems | 0 | ---- | Buy | |
| 150 | IS 17417 : Part 2 : 2020/ISO 4965-2:2012 |
Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 2 Dynamic Calibration Device ( DCD ) Instrumentation | 0 | ---- | Buy | |
| 151 | IS 17418 : 2020/ISO 16842 : 2014 |
Metallic Materials - Sheet and Strip - Biaxial Tensile Testing Method Using a Cruciform Test Piece | 0 | ---- | Buy | |
| 152 | IS 17419 : 2020/ISO 17340:2014 |
Metallic Materials - Ductility Testing - High Speed Compression Test for Porous and Cellular Metals | 0 | ---- | Buy | |
| 153 | IS 1755 : 2018/ISO 7802:2013 (2 Revision) |
Metallic Materials - Wire - Wrapping test (Second Revision) | 0 | Aug, 2023 | Buy | |
| 154 | IS 1757 Part 1 : 2020/ISO 148-1:2016 (4 Revision) |
Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision ) | 0 | Feb, 2020 | Buy | |
| 155 | IS 1757 : Part 2 : 2020/ISO 148-2 : 2016 |
Metallic Materials - Charpy Pendulum Impact Test Part 2 Verification of Testing Machines ( Fourth Revision ) | 0 | ---- | Buy | |
| 156 | IS 1757 : Part 3 : 2020/ISO 148-3:2016 |
Metallic Materials - Charpy Pendulum Impact Test Part 3 Preparation and Characterization of Charpy V-notch Test Pieces for Indirect Verification of Pendulum Impact Machines ( Fourth Revision ) | 0 | ---- | Buy | |
| 157 | IS 1760 : Part 1 : 1991 (1 Revision) |
Chemical analysis of limestone, dolomite and allied materials: Part 1 determination of loss on ignition (First Revision) | 0 | Mar, 2022 | Download | |
| 158 | IS 1760 : Part 2 : 1991 (1 Revision) |
Chemical analysis of dolomite and allied: Part 2 determination of limestone, materials silica (First Revision) | 0 | Mar, 2022 | Download | |
| 159 | IS 1760 : Part 3 : 1992 (1 Revision) |
Chemical analysis of limestone, dolomite and allied materials: Part 3 determination of iron oxide, alumina, calcium oxide and magnesia (First Revision) | 0 | Mar, 2022 | Download | |
| 160 | IS 1760 : Part 4 : 1991 (1 Revision) |
Chemical analysis of limestone, dolomite and allied materials: Part 4 determination of carbon dioxide (First Revision) | 0 | Mar, 2022 | Download | |
| 161 | IS 1760 : Part 5 : 1991 (1 Revision) |
Chemical analysis of limestone, dolomite and allied materials: Part 5 determination of chlorides (First Revision) | 0 | Mar, 2022 | Download | |
| 162 | IS 1760 : Part 6 : 2001 (1 Revision) |
Chemical analysis of limestone, dolomite and allied materials: Part 6 determination of free silica (First Revision) | 0 | Mar, 2022 | Download | |
| 163 | IS 17737 : Part 2 : 2021/ISO 16827 : 2012 |
Mobile Device Security Part 2 Security Requirements | 0 | ---- | Buy | |
| 164 | IS 17885 : Part 3 : 2022/ISO 9042:1988 |
Automation systems and integration Digital twin framework for manufacturing Part 3: Digital representation of manufacturing elements | 0 | ---- | Buy | |
| 165 | IS 1828 : Part 2 : 2015/ISO 7500-2:2006 (1 Revision) |
Metallic materials - Verification of static uniaxial testing machines: Part 2 tension creep testing machines - Verification of the applied force (First Revision) | 0 | Feb, 2020 | Buy | |
| 166 | IS 1917 : Part 1 : 1991 (1 Revision) |
Chemical analysis of quartzite and high silica sand: Part 1 determination of loss on ignition (First Revision) | 0 | Mar, 2022 | Download | |
| 167 | IS 1917 : Part 2 : 1991 (1 Revision) |
Chemical analysis of quartzite and high stlica sand: Part 2 determination of sodium and potassium by flame photometry (First Revision) | 0 | Mar, 2022 | Download | |
| 168 | IS 1917 : Part 3 : 1992 (1 Revision) |
Chemical analysis of quartzite and high silica sand: Part 3 determination of silica (First Revision) | 1 | Mar, 2022 | Download | |
| 169 | IS 1917 : Part 4 : 1991 (1 Revision) |
Chemical analysis of quartzite and high silica sand: Part 4 determination of aluminium by atomic absorption spectrometric method (First Revision) | 0 | Mar, 2022 | Download | |
| 170 | IS 1917 : Part 5 : 1992 (1 Revision) |
Chemical analysis of quartzite and high silica sand: Part 5 determination of iron by atomic absorption spectrometric method (First Revision) | 0 | Mar, 2022 | Download | |
| 171 | IS 1917 : Part 6 : 1992 (1 Revision) |
Chemical analysis of quartzite and high silica sand: Part 6 determination of calcium and magnesium by atomic absorption spectrometric method (First Revision) | 0 | Mar, 2022 | Download | |
| 172 | IS 1917 : Part 7 : 2001 (1 Revision) |
Chemical analysis of quartzite and high silica sand: Part 7 determination of titania by spectrophotometric method (First Revision) | 0 | Mar, 2022 | Download | |
| 173 | IS 1940 : 1969 (1 Revision) |
Methods of chemical analysis of tin ingot (First Revision) | 0 | Mar, 2022 | Download | |
| 174 | IS 1952 : 1963 |
Methods of chemical analysis of nickel anodes | 1 | Mar, 2022 | Download | |
| 175 | IS/ISO 1984 : Part 1 : 2001/ISO 15363 : 2017 |
Test conditions for manually controlled milling machines with table of fixed height- Testing of the accuracy – Part 1: Machines with horizontal spindle (Adoption of ISO 1984-1:2001) (Superseding IS 13640:1993) | 0 | Buy | ||
| 176 | IS 2020 : Part 1 : 1968 |
Methods of chemical analysis of silico - Chromium: Part 1 analysis of silicon and chromium | 0 | Mar, 2023 | Download | |
| 177 | IS 2277 : 1964 |
Methods of chemical analysis of metallic silicon | 0 | Mar, 2023 | Download | |
| 178 | IS 228 : Part 1 : 1987 (3 Revision) |
Methods for chemical analysis ofsteels: Part 1 determination ofcarbon by volumetric method (For Carbon 0.05to 2.50 Percent) (Third Revision) | 1 | Mar, 2023 | Download | |
| 179 | IS 228 : Part 4 : 1987 (3 Revision) |
Method for chemical analysis of steels: Part 4 determination of total carbon by gravimetric method (For Carbon R 0.1 Percent) (Third Revision) | 0 | Mar, 2023 | Download | |
| 180 | IS 228 : Part 5 : 1987 (3 Revision) |
Methods for chemical analysis of steels: Part 5 determination of nickel by dimethylglyoxime (Gravimetric) method (For Nickel)O - l percent) (Third Revision) | 0 | Dec, 2023 | Download | |
| 181 | IS 228 : Part 6 : 1987 (3 Revision) |
Methods for chemical analysis of steels: Part 6 determination of - Chromium by persulphate oxidation method (For Chromium)04 percent) (Third Revision) | 0 | Mar, 2023 | Download | |
| 182 | IS 228 : Part 7 : 1990 (3 Revision) |
Methods for chemical analysis of steels: Part 7 determination of molybdenum by alpha - Benzoinoxime method in alloy steels (For molybdenum 1 percent and not containing tungsten) (Third Revision) | 0 | Mar, 2023 | Download | |
| 183 | IS 228 : Part 8 : 1989 (3 Revision) |
Methods for chemicalanalysisofsteels: Part 8 determination of silicon by the gravimetric method (For Silicon 0.05 To 5.00 Percent) (Third Revision) | 0 | Dec, 2023 | Download | |
| 184 | IS 228 : Part 9 : 1989 (3 Revision) |
Methods for chemical analysis of steels : Part 9 determination of sulphur by evolution method (For Sulphur 0.01 To 0.25 Percent) (Third Revision) | 0 | Dec, 2023 | Download | |
| 185 | IS 228 : Part 10 : 1989 (3 Revision) |
Methods for chemical analysis of steels: Part 10 determination of molybdenum by thiocyanate (Photometric) method in low and high alloy steels (For Molybdenum 0.01 To 1.50 Percent) (First Revision) | 0 | Dec, 2023 | Download | |
| 186 | IS 228 : Part 11 : 1990 (3 Revision) |
Methods for chemical analysis of steels : Part 11 determination of total silicon by reduced molybdosilicate spectrophotometric method in carbon steels and low alloy steels (For Silicon 0.01 To 0.05 Percent) (Third Revision) | 0 | Mar, 2024 | Download | |
| 187 | IS 228 : Part 12 : 2001 (4 Revision) |
Methods for chemical of steels analysis: Part 12 determination of manganese by periodate spectrophotometric method in plain carbon, low alloy and high alloy steels (For Manganese 0.01 To 5.0 Percent) (Fourth Revision) | 0 | Jun, 2023 | Download | |
| 188 | IS 228 : Part 13 : 1982 |
Methods for chemical analysis of steels: Part 13 determination of arsenic | 0 | Mar, 2024 | Download | |
| 189 | IS 228 : Part 14 : 1988 |
Methods for chemical analysis of steels: Part 14 determination of carbon by thermal conductivity method (For Carbon 0.005 To 2.000 Percent | 0 | Dec, 2023 | Download | |
| 190 | IS 228 : Part 15 : 1992 (2 Revision) |
Methods for chemical analysis of steels: Part 15 determination of copper by thiosulphate iodide method (For Copper 0.05 To 5 Percent) (Second Revision) | 0 | Dec, 2023 | Download | |
| 191 | IS 228 : Part 16 : 1992 (2 Revision) |
Methods for chemical analysis of steels: Part 16 determination of tungsten by spectrophotometric method (For Tungsten 0.1 To 2 Percent) (Second Revision) | 0 | Dec, 2023 | Download | |
| 192 | IS 228 : Part 17 : 1998 (2 Revision) |
Methods for chemical analysis of steels: Part 17 determination of nitrogen by thermal conductivity method (For Nitrogen Up To 0.04 Percent) (Second Revision) | 0 | Mar, 2021 | Download | |
| 193 | IS 228 : Part 18 : 1998 (2 Revision) |
Methodsofchemicalanalysis ofsteels: Part 18 determination of oxygen by instrumental method (For Oxygen 0.001 To 0.1000 Percent) (Second Revision) | 0 | Mar, 2023 | Download | |
| 194 | IS 228 : Part 19 : 1998 (2 Revision) |
Methods of chemical analysis of steels: Part 19 determination of nitrogen by steam distillation method (For Nitrogen 0.002 To 0.50 Percent) (Second Revision) | 0 | Mar, 2021 | Download | |
| 195 | IS 228 : Part 21 : 2003 |
Methods for chemical analysis of steels: Part 21 determination of copper by spectrophotometric method (For Copper 0.02 To 0.50 Percent) (Second Revision) | 0 | Jun, 2023 | Download | |
| 196 | IS 228 : Part 22 : 2003 |
Methods of chemical analysis of steels: Part 22 determination of total hydrogen in steel by thermal conductivity method (Hydrogen 0.1 Ppm To 50 Ppm) | 0 | Jun, 2023 | Download | |
| 197 | IS 228 : Part 23 : 2003 |
Methods of chemical analysis of steels: Part 23 determination of total nitrogen in steel by optical emission spectrometer (Nitrogen 0.002 To 1.0 Percent) | 0 | Jun, 2023 | Download | |
| 198 | IS 228 : Part 24 : 2003 |
Methods of chemical analysis of steels: Part 24 determination of nitrogen in steel by inert gas fusion - Thermal conductivity method (Nitrogen 0.001 To 0.2 Percent) | 0 | Jun, 2023 | Download | |
| 199 | IS 2305 : 1988 (1 Revision) |
Method for mercurous nitrate test for copper and copper alloys (First Revision) | 0 | Mar, 2021 | Download | |
| 200 | IS 2328 : 2018/ISO 8492:2013 (3 Revision) |
Metallic materials - Tube - Flattening test (Third Revision) | 0 | Aug, 2023 | Buy | |
| 201 | IS 2329 : 2005/ISO 8491:1998 (2 Revision) |
Metallic materials - Tube (In Full Section) - Bend test (Second Revision) | 0 | Jan, 2022 | Buy | |
| 202 | IS 2335 : 2005/ISO 8493:1998 (2 Revision) |
Metallic Materials - Tube - Drift expanding test (Second Revision) | 0 | Feb, 2022 | Buy | |
| 203 | IS 2390 : 1967 |
Methods for chemical analysis of foundry nickel | 0 | Mar, 2022 | Download | |
| 204 | IS 2417 : 2003 (2 Revision) |
Glossary of terms used in ultrasonic non-destructive testing (Second Revision) | 0 | Feb, 2020 | Download | |
| 205 | IS 2478 : 1991 (2 Revision) |
Glossary of terms relating to industrial radiology (Second Revision) | 0 | Feb, 2020 | Download | |
| 206 | IS 2595 : 2008 (2 Revision) |
Industrial radiographic testing - Code of practice (Second Revision) | 0 | Feb, 2020 | Download | |
| 207 | IS 2599 : 1983 (1 Revision) |
Methods for spectrographic analysis purity zinc and zinc base for die castings (First Revision) of high alloys | 0 | Mar, 2022 | Download | |
| 208 | IS 2600 : Part 1 : 1988 (1 Revision) |
Methods of chemical analysis of zinc and zinc base alloys for die castings: Part 1 determination of copper, iron, nickel, tin and thallium by spectrophotometric method (First Revision) | 0 | Dec, 2023 | Download | |
| 209 | IS 2600 : Part 2 : 1988 (1 Revision) |
Methods of chemical analysis of zinc and zinc base alloys for die castings: Part 2 determination of copper, iron, lead and cadmium by atomic absorption spectrophotometric method (First Revision) | 0 | Dec, 2023 | Download | |
| 210 | IS 2600 : Part 3 : 1993 (1 Revision) |
Methods of chemical analysis of zinc and zinc base alloys for die castings: Part 3 determination of indium by atomic absorption spectrometric method (First Revision) | 0 | Dec, 2023 | Download | |
| 211 | IS 2600 : Part 4 : 1993 (1 Revision) |
Methods of chemical analysis of zinc and zinc base alloys for die castings: Part 4 determination of chromium by spectrophotometric method (First Revision J | 0 | Dec, 2023 | Download | |
| 212 | IS 2766 : Part 1 : 1968 |
Methods of chemical analysis of primary nickel: Part 1 | 0 | Mar, 2022 | Download | |
| 213 | IS 2854 : 1990 (1 Revision) |
Determination of young's modulus,tangent modulus and chord modulus - Test method | 0 | Mar, 2022 | Download | |
| 214 | IS 2855 : 1991 (1 Revision) |
Thermostat metals - Determinantion of flexivity (First Revision) | 0 | Feb, 2020 | Download | |
| 215 | IS 2953 : 1985 (1 Revision) |
Glossary of terms used for interpretation of welds and castings radiographs (First Revision) | 0 | Feb, 2020 | Download | |
| 216 | IS/ISO 3057 : 1998/IS0 3057:1998 |
Non - Destructive testing - Metallographic replica techniques of surface examination | 0 | Feb, 2020 | Buy | |
| 217 | IS 3186 : 1965 |
Methods of chemical analysis of cadmium copper | 0 | Mar, 2023 | Download | |
| 218 | IS 3187 : 1965 |
Methods of chemical analysis of Copper - Nickel - Zinc alloys | 0 | Mar, 2023 | Download | |
| 219 | IS 3200 : 2001 (2 Revision) |
Chemical analysis of cryolite (Second Revision) | 1 | Mar, 2023 | Download | |
| 220 | IS 3295 : Part 1 : 1969 |
Methods of chemical analysis of ferro boron: Part 1 analysis for carbon, silicon and aluminium | 0 | Dec, 2023 | Download | |
| 221 | IS 3295 : Part 2 : 1970 |
Method of chemical analysis of ferroboron: Part 2 determination of boron | 1 | Dec, 2023 | Download | |
| 222 | IS 3394 : 1985 (1 Revision) |
Method for accelerated life test of electrical resistance alloys for heating elements (First Revision) | 0 | Mar, 2022 | Download | |
| 223 | IS 3407 : Part 1 : 1983 (1 Revision) |
Method for creep testing of steel at elevated temperatures: Part 1 tensile creep testing (First Revision) | 0 | Mar, 2022 | Download | |
| 224 | IS 3407 : Part 2 : 1983 (1 Revision) |
Method for creep testing of steel at elevated temperatures: Part 2 tensile creep stress rupture testing (First Revision) | 0 | Mar, 2022 | Download | |
| 225 | IS 3410 : 1993 (1 Revision) |
Metallic materials - Determination of linear thermal expansion (First Revision) | 0 | Feb, 2020 | Download | |
| 226 | IS 3415 : 1998 (2 Revision) |
Glossary of terms used in magnetic particle flaw detection (Second Revision) | 0 | Feb, 2020 | Download | |
| 227 | IS 3658 : 1999 (2 Revision) |
Code of practice for liquid penetrant flaw detection (Second Revision) | 0 | Feb, 2020 | Download | |
| 228 | IS 3664 : 1981 (1 Revision) |
Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision) | 0 | Feb, 2020 | Download | |
| 229 | IS 3685 : 1966 |
Methods of chemical analysis of brasses | 0 | Mar, 2023 | Download | |
| 230 | IS 3711 : 2020/ISO 377:2017 (3 Revision) |
Steel and Steel Products — Location and Preparation of Samples and Test Pieces for Mechanical Testing ( Third Revision ) | 0 | ---- | Buy | |
| 231 | IS 4027 : Part 1 : 1987 (1 Revision) |
Methods of chemical analysis of bronzes: Part 1 determination of copper and lead by electrolytic method (First Revision) | 0 | Mar, 2023 | Download | |
| 232 | IS 4027 : Part 3 : 1987 (1 Revision) |
Methods of chemical analysis of bronzes: Part 3 determination of phosphorus by volumetric method (First Revision) | 0 | Mar, 2023 | Download | |
| 233 | IS 4027 : Part 4 : 1987 (1 Revision) |
Methods of chemical analysis of bronzes: Part 4 determination of nickel - Dimethylglyoxime photometirc method (First Revision) | 0 | Mar, 2023 | Download | |
| 234 | IS 4027 : Part 5 : 1987 (1 Revision) |
Methods of chemical analysis of bronzes: Part 5 determination of tin - Iodimetric method (First Revision) | 0 | Mar, 2023 | Download | |
| 235 | IS 4027 : Part 6 : 1987 (1 Revision) |
Methods of chemical analysis of bronzes: Part 6 determination of zinc by complexometric (EDTA) method (First Revision) | 0 | Mar, 2023 | Download | |
| 236 | IS 4027 : Part 7 : 1990 (1 Revision) |
Methods of chemical analysis of bronzes: Part 7 determination of antimony by rhodamine B spectrophotometric method (First Revision) | 0 | Mar, 2023 | Download | |
| 237 | IS 4027 : Part 8 : 1991 (1 Revision) |
Methods of chemical analysis of bronzes: Part 8 determination of iron (First Revision) | 0 | Mar, 2023 | Download | |
| 238 | IS 4027 : Part 9 : 1991 (1 Revision) |
Methods of chemical analysis of bronzes: Part 9 determination of aluminium by atomic absorption spectrometric method (First Revision) | 0 | Mar, 2023 | Download | |
| 239 | IS 4027 : Part 10 : 2000 (1 Revision) |
Chemical analysis of bronzes - Methods: Part 10 determination of silicon (First Revision) | 0 | Mar, 2023 | Download | |
| 240 | IS 4027 : Part 11 : 2000 (1 Revision) |
Chemical analysis of bronzes - Methods: Part 11 determination of lead - Ethylenediamine tetraacetic acid (Edta) - Titrimetric - method (First Revision) | 0 | Mar, 2023 | Download | |
| 241 | IS 403 : 1964 |
Methqds of chemical analysis of lead and antimonial lead (Revised) | 0 | Mar, 2021 | Download | |
| 242 | IS 406 : 1964 |
Methods of chemical analysis of slab zinc (Spelter) (Revised) | 0 | Mar, 2021 | Download | |
| 243 | IS 4075 : 1985 (1 Revision) |
Method for macrostreak flaw test for steel (First Revision) | 0 | Feb, 2023 | Download | |
| 244 | IS 4169 : 2014/ISO 376 : 2011 (2 Revision) |
Metallic materials - Calibration of force proving instruments used for the verification of uniaxial testing machines (Second Revision) | 0 | Feb, 2020 | Buy | |
| 245 | IS 4258 : 2018/ISO 18265 : 2013 (3 Revision) |
Metallic materials - Conversion of hardness values (Third Revision) | 0 | Aug, 2023 | Buy | |
| 246 | IS 4260 : 2004 (2 Revision) |
Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision) | 0 | Mar, 2021 | Download | |
| 247 | IS 4354 : Part 1 : 1967 |
Methods of chemical analysis of magnesium - Aluminium brazing alloys: Part 1 analysis .of aluminium, manganese, zinc and silicon | 0 | Mar, 2022 | Download | |
| 248 | IS 440 : 1964 |
Methods of chemical analysis of copper (Revised) | 0 | Mar, 2023 | Download | |
| 249 | IS 4548 : Part 1 : 1967 |
Methods of chemical analysis of copper - Gold brazing alloys: Part 1 analysis of gold and copper | 0 | Mar, 2023 | Download | |
| 250 | IS 4646 : Part 1 : 1968 |
Methods of chemical analysis of copper - Phosphorus brazing alloys: Part 1 analysis for silver and copper | 0 | Mar, 2023 | Download | |
| 251 | IS 4646 : Part 2 : 1976 |
Methods of chemical analysis of copper - Phosphorus brazing alloys: Part 2 determination of phosphorus | 0 | Mar, 2023 | Download | |
| 252 | IS 4667 : Part 1 : 1968 |
Methods of chemical analysis of silver - Copper brazing alloys: Part 1 analysis for silver and copper | 0 | Mar, 2023 | Download | |
| 253 | IS 4667 : Part 2 : 1969 |
Methods of chemical analysis of silver - Copper brazing alloys: Part 2 determination of silver, copper and tin | 0 | Mar, 2023 | Download | |
| 254 | IS 4667 : Part 3 : 2001 |
Chemical analysis of silver - Copper brazing alloys: Part 3 determination of nicke | 0 | Mar, 2023 | Download | |
| 255 | IS 4667 : Part 4 : 2001 |
Chemical analysis of silver - Copper brazing alloys - Part 4 determination of silver, copper, cadmium and zinc - Electolytic method | 1 | Mar, 2023 | Download | |
| 256 | IS 4853 : 1982 (1 Revision) |
Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision) | 0 | Feb, 2020 | Download | |
| 257 | IS 4904 : 2006 (4 Revision) |
Calibration blocks for use in ultrasonic non - Destructive testing - Specification (Fourth Revision) | 0 | Mar, 2023 | Download | |
| 258 | IS 504 : 1963 |
Methods of chemical analysis of aluminium and its alloys (Revised) | 0 | Dec, 2023 | Download | |
| 259 | IS 504 : Part 1 To 12 : 2002 (2 Revision) |
Chemical analysis of aluminium and its alloys parts 1 to 12 (Second Revision) | 0 | Mar, 2023 | Download | |
| 260 | IS 504 : Part 13 to 16 : 2003 (2 Revision) |
Chemical analysis of aluminium and its alloys parts 13 to 16 (Second Revision) | 0 | Mar, 2023 | Download | |
| 261 | IS 5069 : 2018/ISO 23718 (2 Revision) |
Metallic Materials - Mechanical Testing - Vocabulary (Second Revision) | 0 | Aug, 2023 | Buy | |
| 262 | IS 5070 : 1985 (1 Revision) |
Method for beam unnotched impact test for grey cast iron (First Revision) | 0 | Mar, 2022 | Download | |
| 263 | IS 5242 : 1979 (1 Revision) |
Method of test for determining shear strength of metals (First Revision) | 0 | Mar, 2022 | Download | |
| 264 | IS 5334 : 2014 (3 Revision) |
Magnetic particle flaw detection of welds - Code of practice (Third Revision) | 0 | Feb, 2020 | Download | |
| 265 | IS 5425 : Part 1 : 1969 |
Methods of chemical analysis of misch metal: Part 1 determination of cerium | 0 | Mar, 2023 | Download | |
| 266 | IS 5425 : Part 2 : 1984 |
Method of chemical analysis of misch metal: Part 2 determination of total rare earths | 0 | Mar, 2023 | Download | |
| 267 | IS 5425 : Part 3 : 1987 |
Methods of chemical analysis of misch metal: Part 3 determination of iron | 0 | Mar, 2019 | Download | |
| 268 | IS 5425 : Part 4 : 1987 |
Methods of chemical analysis of misch metal: Part 4 determination of aluminium | 0 | Mar, 2019 | Download | |
| 269 | IS 5425 : Part 5 : 1987 |
Method of chemical analysis of misch metal: Part 5 determination of carbon | 0 | Mar, 2019 | Download | |
| 270 | IS 5528 : 1985/ISO 9227 : 2022 (1 Revision) |
Method of testing corrosion resistance of electroplated and anodized aluminium coating by copper accelerated acetic acid salt spray (CASS) test (First Revision) | 0 | Mar, 2021 | Buy | |
| 271 | IS/ISO 5580 : 1985/IS0 5580:1985 |
Non - Destructive testing - Industrial radiographic illuminators - Minimum requirements | 0 | Mar, 2023 | Buy | |
| 272 | IS 5652 : Part 1 : 1993/ISO 3738-1:1982 (2 Revision) |
Hardmetals - Rockwell hardness test (Scale A): Part 1 test method (Second Revision) | 0 | Feb, 2024 | Buy | |
| 273 | IS 5699 : 1970 |
Methods for chill testing of cast iron | 0 | Mar, 2023 | Download | |
| 274 | IS 6012 : 1992 (1 Revision) |
Measurement of coating thickness by eddy current method (First Revision) | 0 | Mar, 2021 | Download | |
| 275 | IS/IEC 60645 : Part 3 : 2020/ISO 2624:1990 |
Electroacoustics Audiometric equipment Part 3: Test signals of short duration | 0 | ---- | Buy | |
| 276 | IS/IEC/TS 61400 : Part 13 : 2015/ISO 204:2018 (1 Revision) |
WIND TURBINES PART 13: MEASUREMENT OF MECHANICAL LOADS | 1 | Sep, 2024 | Buy | |
| 277 | IS 6226 : Part 1 : 1994 (1 Revision) |
Recommendations for apparatus for chemicals analysis of metals: Part 1 apparatus for determination of carbon by direct combustion (First Revision) | 1 | Mar, 2023 | Download | |
| 278 | IS 6226 : Part 2 : 1987 |
Recommendations for apparatus for chemical analysis of metals: Part 2 determination of sulphur by direct combustion | 0 | Dec, 2023 | Download | |
| 279 | IS 6243 : 1985 (1 Revision) |
Method of hydrogen embrittlement test for copper (First Revision) | 0 | Mar, 2022 | Download | |
| 280 | IS 6394 : 2006 (2 Revision) |
Ultrasonic testing of seamless metallic tubular products by contact and immersion methods - Code of practice (Second Revision) | 0 | Mar, 2023 | Download | |
| 281 | IS 6398: Part 2 : 2020/ISO 10893-2:2011 (2 Revision) |
Non-Destructive Testing of Steel Tubes Part 2 Automated Eddy Current Testing of Seamless and Welded ( Except Submerged Arc-Welded ) Steel Tubes for the Detection of imperfections ( Second Revision ) | 1 | ---- | Buy | |
| 282 | IS 6410 : 2013 (2 Revision) |
Magnetic flaw detection inks and powders - Specification (Second Revision) | 0 | Feb, 2020 | Download | |
| 283 | IS 6516 : 1972 |
Methods for chemical analysis of tin in secondary tin and lead | 0 | Mar, 2022 | Download | |
| 284 | IS 6752 : 2014 (2 Revision) |
Code of practice for magnetic particle flaw detection of ferrous pipes and tubes (Second Revision) | 0 | Feb, 2020 | Download | |
| 285 | IS 6885 : PART 1 : 2020/ISO 4545-1:2017 (2 Revision) |
Metallic Materials — Knoop Hardness Test Part 1 Test Method ( Second Revision ) | 0 | ---- | Buy | |
| 286 | IS 6885 : PART 2 : 2020/ISO 4545-2:2017 (2 Revision) |
Metallic Materials — Knoop Hardness Test Part 2 Verification and Calibration of Testing Machines ( Second Revision ) | 0 | ---- | Buy | |
| 287 | IS 6885 : PART 3 : 2020/ISO 4545-3:2017 (2 Revision) |
Metallic Materials — Knoop Hardness Test Part 3 Calibration of Reference Blocks ( Second Revision ) | 0 | ---- | Buy | |
| 288 | IS 6885 : PART 4 : 2020/ISO 4545-4:2017 (2 Revision) |
Metallic Materials — Knoop Hardness Test Part 4 Tables of Hardness Values ( Second Revision ) | 0 | ---- | Buy | |
| 289 | IS 6886 : 1973 |
Method of dynamic force calibration of axial load fatigue testing machines by means of a strain gauge technique | 0 | Mar, 2022 | Download | |
| 290 | IS 7072 : 1973 |
Glossary of terms relating to emission spectroscopy | 0 | Mar, 2022 | Download | |
| 291 | IS 7096 : 1981 (1 Revision) |
Method for scleroscope hardness testing of metallic materials (first Revision) | 0 | Mar, 2022 | Download | |
| 292 | SP 71 : 2012 |
Compendium of method of chemical analysis of steels | 0 | Mar, 2022 | Download | |
| 293 | IS 7172 : 1984 (1 Revision) |
Method for verification of scleroscope hardness testing machines (First Revision) | 0 | Mar, 2022 | Download | |
| 294 | IS 7343 : 1986 (1 Revision) |
Code of practice for ultrasonic testing of ferrous welded pipes and tubular products - (First Revision) | 0 | Feb, 2020 | Download | |
| 295 | IS 7659 : Part 1 : 1975 |
Reagents and standard solutions for use in chemical analysis of metals, ores and minerals: Part 1 volumetric solutions | 0 | Dec, 2023 | Download | |
| 296 | IS 7666 : 1988 (1 Revision) |
Ultrasonic examination of ferritic castings of carbon and low alloy steel - Recommedned procedure (First Revision) | 0 | Feb, 2020 | Download | |
| 297 | IS 7739 : Part 1 : 1975 |
Code of practice for preparation of metallographic specimens: Part 1 general features | 0 | Feb, 2023 | Download | |
| 298 | IS 7739 : Part 2 : 1975 |
Code of practice for preparation of metallographic specimens: Part 2 electrolytic polishing | 0 | Mar, 2023 | Download | |
| 299 | IS 7739 : Part 3 : 1975 |
Code of practice for preparation of metallographic specimens: Part 3 aluminium and its alloys and their examination | 0 | Mar, 2023 | Download | |
| 300 | IS 7739 : Part 4 : 1975 |
Code of practice for preparation of metallographic specimens: Part 4 copper and its alloys and their examination | 0 | Feb, 2023 | Download | |
| 301 | IS 7739 : Part 5 : 1976 |
Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination | 0 | Mar, 2023 | Download | |
| 302 | IS 7739 : Part 6 : 1975 |
Code of practice for preparation of metallographic specimens: Part 6 lead and its alloys and their examination | 0 | Feb, 2023 | Download | |
| 303 | IS 7739 : Part 7 : 1975 |
Code of practice for preparation of metallographic specimens: Part 7 magnesium and its alloys and their examination | 0 | Feb, 2023 | Download | |
| 304 | IS 7739 : Part 8 : 1975 |
Code of practice for preparation of metallographic specimens: Part 8 nickel and its alloys and their examination | 0 | Feb, 2023 | Download | |
| 305 | IS 7739 : Part 9 : 1975 |
Code of practice for preparation of metallographic specimens: Part 9 gold, silver, platinum, palladium and their alloys | 0 | Feb, 2023 | Download | |
| 306 | IS 7739 : Part 10 : 1975 |
Code of practice for preparation of metallographic specimens: Part 10 tin and its alloys and their examination | 0 | Feb, 2023 | Download | |
| 307 | IS 7739 : Part 11 : 1976 |
Code of practice for preparation of metallographic specimens: Part 11 zinc and its alloys and their examination | 0 | Feb, 2023 | Download | |
| 308 | IS 7743 : 2006 (1 Revision) |
Recommended practice for magnetic particle testing and inspection of steel forgings (First Revision) | 0 | Mar, 2023 | Download | |
| 309 | IS 7810 : 1999 (1 Revision) |
Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (First Revision) | 0 | Feb, 2020 | Download | |
| 310 | IS 8097 : 1976 |
Methods of chemical analysis of soft solders for jointing alumtnium and aluminium alloys | 0 | Mar, 2022 | Download | |
| 311 | IS 8780 : 2004 (1 Revision) |
Non - Destructive testing of steel castings - Code of practice (First Revision) | 0 | Feb, 2020 | Download | |
| 312 | IS 8791 : 1978 |
Code of practice for ultrasonic flaw detection of ferritic steel forgings | 0 | Feb, 2020 | Download | |
| 313 | IS 8812 : Part 1 : 1978 |
Methods of chemical analysis of hard solders for jointing aluminium and aluminium alloys: Part 1 determination of silver, copper, zinc, antimony, arsenic, iron and bismuth | 0 | Mar, 2019 | Download | |
| 314 | IS 8812 : Part 2 : 1982 |
Methods of chemical analysis of hard solders for jointing aluminium and aluminium alloys: Part 2 determination of aluminium | 0 | Mar, 2019 | Download | |
| 315 | IS 8816 : 1978 |
Methods for selection and preparation of samples for spectrographic analysis of zinc and zinc alloy ingots | 0 | Mar, 2022 | Download | |
| 316 | IS 8860 : 1978 |
Code of practice for heat treatment of aluminium alloys | 0 | Feb, 2023 | Download | |
| 317 | IS 8973 : 1991 (1 Revision) |
Leak detection techniques glossary (First Revision) | 0 | Feb, 2020 | Download | |
| 318 | IS 9530 : 1980 |
Method of testing microhardness of electroplated coatings | 0 | Mar, 2021 | Download | |
| 319 | IS 9902 : 2004 |
Recommended practice for leak testing (First Revision) | 0 | Feb, 2020 | Download | |
| 320 | IS 998 : Part 1 : 1983 (1 Revision) |
Methods of chemical analysis of solders (Soft And Rosin - Cored): Part 1 determination of tin and antimony (First Revision) | 0 | Mar, 2019 | Download | |
| 321 | IS 998 : Part 2 : 1983 (1 Revision) |
Methods of chemical analysis of solders (Soft And I&in Cored) determi tion of iron, copper and arsensc (First Revision) | 0 | Mar, 2019 | Download | |
| 322 | IS 998 : Part 3 : 1983 (1 Revision) |
Methods of chemical analysis of solders (Soft And Rosin Cored): Part 3 determination of cadmium, zinc, aluminium, bismuth and nickel (First Revision) | 0 | Mar, 2019 | Download | |
| 323 | IS 999 : 1959 |
Methods of chemical analysis of brazing solder | 0 | Mar, 2024 | Download |