| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 1875 : 1992 |
Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision) |
MTD 4 |
| 2 |
IS 4432 : 1988 |
Specification for case hardening steels (First Revision) |
MTD 16 |
| 3 |
IS 11714 : Part 1 to 5 : 1986 |
Specification for steel tubes for heat exchangers |
MTD 19 |
| 4 |
IS 963 : 1958 |
Specification for chrome molybdenum steel bars and rods for aircraft purposes |
MTD 16 |
| 5 |
IS 11952 : 1986 |
Specification for steels for piston pins (Gudgeon Pins) |
MTD 16 |
| 6 |
IS 7291 : 1981 |
Specification for high speed tool steels (First Revision) |
MTD 16 |
| 7 |
IS 15703 : 2018 |
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (First Revision) |
MTD 25 |
| 8 |
IS 1135 : 2018 |
Springs - Leaf springs assembly for automobiles - Specification (Sixth Revision) |
TED 34 |
| 9 |
IS 7016 : Part 15 : 2019 |
Methods of Test for Coated and Treated Fabrics Part 15 Determination of Abrasion Resistance Using Taber Abrader |
TXD 33 |
| 10 |
IS/IEC 61439 : Part 5 : 2014 |
Low-Voltage Switchgear and Controlgear Assemblies Part 5 Assemblies for Power Distribution in Public Networks |
ETD 7 |
| 11 |
IS 17166 : 2019 |
Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications |
PGD 24 |
| 12 |
IS 1367 : Part 5 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
| 13 |
IS 1367 : Part 6 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
| 14 |
IS 1367 : Part 14 : Sec 3 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision |
PGD 37 |
| 15 |
IS 15935 : 2011 |
Composite cylinders for on - Board storage of compressed natural gas (CNG) as a fuel for automotive vehicle - Specification |
MED 16 |
| 16 |
IS 3769 : 1993 |
Textiles - Pugree cloth, cotton khadi,bleached or dyed |
TXD 8 |
| 17 |
IS 5489 : 1975 |
Specification for carburizing steels for use in bearing industry (First Revision) |
MTD 16 |
| 18 |
IS 12146 : 1987 |
Specification for carbon manganese steel forgings for pressure vessels |
MTD 16 |
| 19 |
IS 9516 : 1980 |
Specification for heat resisting steels |
MTD 16 |
| 20 |
IS 1500 : Part 2 : 2013 |
Matallic Materials - Brinell Hardness Test Part 2 Verification and Calibration Testing Machines |
MTD 3 |
| 21 |
IS 17676 : Part 1 : 2021 |
Guidelines for the management of assets of water supply and wastewater systems Part 1:Drinking water distribution networks |
EED 4 |
| 22 |
IS 17677 : 2021 |
Guidelines for Health Risk Assessment and Management for Non-Potable Water Reuse |
EED 2 |
| 23 |
IS 1060 : Part 5 : Sec 12 : 2021 |
Method of Sampling and Test for Paper and Allied Products Part 5 Method of Test for Paper and Board Section 12 Measurement of specular gloss 75 degree gloss with a converging beam TAPPI method |
CHD 15 |
| 24 |
IS 11169 : Part 1 : 1984 |
Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels |
MTD 16 |
| 25 |
IS 3748 : 1990 |
Tool and die steels - Specification (Second Revision) |
MTD 16 |
| 26 |
IS 1367 : Part 14 : Sec 1 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision) |
PGD 37 |
| 27 |
IS 13316 : 1992 |
Welded austenitic stainless steel tubes for heat exchangers for the sugar industry - Specification |
FAD 2 |
| 28 |
IS/ISO 29995 : 2021 |
Education and learning services Vocabulary |
SSD 4 |
| 29 |
IS 1367 : Part 14 : Sec 2 : 2018 |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision) |
PGD 37 |
| 30 |
IS 1536 : 2001 |
Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision) |
MTD 6 |
| 31 |
IS 8748 : 1978 |
Specification for forged/rolled CTC segments |
MTD 16 |
| 32 |
IS 17631 : 2022 |
Work Chairs - Specification |
CED 35 |
| 33 |
IS 7494 : 1981 |
Specification for steel for valves for internal combustion engines (First Revision) |
MTD 16 |
| 34 |
IS 1729 : 2002 |
Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision) |
MTD 6 |
| 35 |
IS/IEC 60372 : 1984 |
Locking devices for ball and socket couplings of string insulators units - Dimensions and tests |
ETD 6 |
| 36 |
IS 17902 : 2022 |
Animal feeding stuffs Determination of amylase-treated neutral detergent fibre content ANDF |
FAD 5 |
| 37 |
IS 17903 : 2022 |
Animal feeding stuffs Determination of acid detergent fibre ADF and acid detergent lignin ADL contents |
FAD 5 |
| 38 |
IS 12890 : 1990 |
Bobbin rail for jute spinning frames - Specification |
TXD 14 |
| 39 |
IS 3989 : 2009 |
Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories - Specification (Third Revision) |
MTD 6 |
| 40 |
IS 12658 : 1989 |
Grinding media rolled/forged carbon and Carbon - Chromium steels - Specification |
MTD 16 |
| 41 |
IS 17473 : 2020 |
Laminate Floor Coverings - Determination of Abrasion Resistance |
TXD 4 |
| 42 |
IS 17473 : 2020 |
Laminate Floor Coverings - Determination of Abrasion Resistance |
TXD 4 |
| 43 |
IS 3494 : 1978 |
Specification for Pruning Secateur (First Revision) |
FAD 11 |
| 44 |
IS 6603 : 2001 |
Stainless steel bars and flats - Specification (First Revision) |
MTD 16 |
| 45 |
IS 3122 : 1982 |
Specification for Budding and Grafting Knife Combined (First Revision) |
FAD 11 |
| 46 |
IS 7898 : 2001 |
Manually - Operated Chaff Cutter - Specification (Second Revision) |
FAD 20 |
| 47 |
IS 617 : 1994 |
Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision) |
MTD 7 |
| 48 |
IS 433 : Part 7 : 2022 |
METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 7 RUBBER AND PLASTICS HOSES DETERMINATION OF ADHESION BETWEEN COMPONENTS |
PCD 29 |
| 49 |
IS/ISO 105-G04 : 2016 |
Textiles Tests for colour fastness Part G04 : Colour fastness to nitrogen oxides in the atmosphere at high humidities first revision |
TXD 5 |
| 50 |
IS 328 : 2022 |
OIL OF EUCALYPTUS GLOBULUS - SPECIFICATION |
PCD 18 |
| 51 |
IS 3093 : 1981 |
Specification for Dah, Jungle Cutting (First Revision) |
FAD 11 |
| 52 |
IS 14802 : Part 2 : 2019 |
Plain Bearing — Hardness Testing of Bearing Metals Part 2 Solid Materials ( First Revision ) |
PGD 13 |
| 53 |
IS 11459 : 1985 |
Specification for Power - Operated Chaff Cutter |
FAD 20 |
| 54 |
IS 9397 : 2001 |
Alpine skis and bindings - Binding mounting area - Requirements and test methods (First Revision) |
PGD 27 |
| 55 |
IS 10683 : 1983 |
Specification for Khurpi |
FAD 11 |
| 56 |
IS 2565 : 1979 |
Specification for Ridger, Animal - Drawn (First Revision) |
FAD 11 |
| 57 |
IS 3094 : 1982 |
Specification for Bill - Hook (First Revision) |
FAD 11 |
| 58 |
IS 17003 : Part 3 : 2022 |
Nanotechnologies Vocabulary Part 3: Carbon nano-objects |
MTD 33 |
| 59 |
IS 11286 : 1995 |
Corrosion resistant high alloy steel, nickel base and cobalt base investment castings for severe applications - Specification (First Revision) |
MTD 14 |
| 60 |
IS/ISO 10987 : Part 2 : 2017 |
Earth - Moving Machinery — Sustainability Part 2 Remanufacturing |
MED 7 |
| 61 |
IS 15905 : 2011 |
Hubless centrifugally cast (Spun) iron pipes, fittings and accessories - Spigot series - Specification |
MTD 6 |
