Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 104
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 10166 : 1982 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Method for calibration of standardized test block for verification of scleroscope hardness testing equipments | 0 | Mar, 2022 | Download | |
| 2 |
IS 10167 : 1982 Reviewed In : 2022 |
Method for upsetting test on metallic materials | 0 | Mar, 2022 | Download | |
| 3 |
IS 10175 : 2018 ISO 20482 : 2013 Reviewed In : 2023 ISO 20482 : 2013 (First Revision) |
Metallic materials - Sheet and strip - Erichsen cupping test (Third Revision) | 0 | Aug, 2023 | Buy | |
| 4 |
IS 10180 : 1982 Reviewed In : 2022 |
Method for plane strain fracture toughness testing of metals | 0 | Mar, 2022 | Download | |
| 5 |
IS 10623 : 2023 (First Revision) |
Drop Weight Tear Test on Ferritic Steels and Line Pipe ? Method of Test | 0 | ---- | Buy | |
| 6 |
IS 10636 (Part 1) : 1983 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Methods for measurement of abrasive wear properties of metallic material: Part 1 test method for gouging abrasion resistance (Jaw Crusher Test) | 0 | Mar, 2022 | Download | |
| 7 |
IS 10636 (Part 2) : 1983 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Method for measurement of abrasive wear properties of metalliC material: Part 2 test method for high stress abrasion | 0 | Mar, 2022 | Download | |
| 8 |
IS 10636 (Part 3) : 1983 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Methods for measurement of abrasive wear properties of metallic material: Part 3 test methods for low stress abrasion | 0 | Mar, 2022 | Download | |
| 9 |
IS 11083 : 1984 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Method for evaluation of friction and wear properties of materials against steel surface | 0 | Mar, 2022 | Download | |
| 10 |
IS 11240 : 1985 Reviewed In : 2022 |
Method for falling weight test on metallic materials | 0 | Mar, 2022 | Download | |
| 11 |
IS 11999 : 2022 ISO 9186-3 : 2014 ISO 9186-3 : 2014 (Second Revision) |
METALLIC MATERIALS SHEET AND STRIP DETERMINATION OF PLASTIC STRAIN RATIO (Second Revision) | 0 | ---- | Buy | |
| 12 |
IS 12260 : 2018 ISO 8495 : 2013 Reviewed In : 2023 ISO 8495 : 2013 (First Revision) |
Metallic Materials - Tube - Ring - Expanding test (First Revision) | 0 | Aug, 2023 | Buy | |
| 13 |
IS 12261 : 1987 Reviewed In : 2020 |
Method for reverse torsion test for metallic wire | 0 | Feb, 2020 | Buy | |
| 14 |
IS 12278 : 2018 ISO 8496 : 2013 Reviewed In : 2023 ISO 8496 : 2013 (Second Revision) |
Metallic Materials - Tube - Ring tensile test (Second Revision) | 0 | Aug, 2023 | Buy | |
| 15 |
12872 : 2021 ISO 16890-3:2016 ISO 16890-3:2016 (Second Revision) |
Metallic Materials - Calibration of Extensometer Systems Used in Uniaxial Testing ( Second Revision ) | 0 | ---- | Buy | |
| 16 |
IS 13237 : 1991 Reviewed In : 2020 |
Metallic foil - Tension testing | 0 | Feb, 2020 | Download | |
| 17 |
IS 13838 : 2023 (First Revision) |
MECHANICAL TESTING OF METALS- DETERMINATION OF POISSONS RATIO | 0 | ---- | Buy | |
| 18 |
IS 1403 (Part 1) : 1993 ISO 7799:1985 Reviewed In : 2020 ISO 7799:1985 (Second Revision) |
Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test | 1 | Feb, 2020 | Buy | |
| 19 |
IS 1500 (Part 1) : 2019 ISO 6506-1 : 2014 Reviewed In : 2024 ISO 6506-1 : 2014 (Fifth Revision) |
Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision) | 0 | Jan, 2024 | Buy | |
| 20 |
IS 1500 (Part 2) : 2021 ISO/TR 11636:2009 ISO/TR 11636:2009 (Fifth Revision) |
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines | 0 | ---- | Buy | |
| 21 |
IS 1500 (Part 3) : 2019 ISO 6506-3 : 2014 Reviewed In : 2024 ISO 6506-3 : 2014 (Fifth Revision) |
Metallic materials - Brinell hardness test: Part 3 calibration of reference blocks (Fifth Revision) | 0 | Jan, 2024 | Buy | |
| 22 |
IS 1500 (Part 4) : 2019 ISO 6506-4 : 2014 Reviewed In : 2024 ISO 6506-4 : 2014 (Fifth Revision) |
Metallic materials - Brinell hardness test: Part 4 table of hardness values (Fifth Revision) | 0 | Jan, 2024 | Buy | |
| 23 |
IS 1501 (Part 1) : 2020 ISO 6507-1:2018 ISO 6507-1:2018 (Fifth Revision) |
Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision ) | 0 | ---- | Buy | |
| 24 |
IS 1501 (Part 2) : 2020 ISO 6507-2 : 2018 ISO 6507-2 : 2018 (Fifth Revision) |
Metallic Materials — Vickers Hardness Test Part 2 Verification and Calibration of Testing Machines ( Fifth Revision ) | 0 | ---- | Buy | |
| 25 |
IS 1501 (Part 3) : 2020 ISO 6507-3 : 2018 ISO 6507-3 : 2018 (Fifth Revision) |
Metallic Materials — Vickers Hardness Test Part 3 Calibration of Reference Blocks ( Fifth Revision ) | 0 | ---- | Buy | |
| 26 |
IS 1501 (Part 4) : 2020 ISO 6507-4 : 2018 ISO 6507-4 : 2018 (Fifth Revision) |
Metallic Materials — Vickers Hardness Test Part 4 Tables of Hardness Values ( Fifth Revision ) | 0 | ---- | Buy | |
| 27 |
IS 15420 : 2003 Reviewed In : 2021 |
Metallic materials - Charpy pendulum impact test - Preparation and characterization of charpy V reference test pieces for verification of test machines | 0 | Mar, 2021 | Download | |
| 28 |
IS 15756 : 2022 ISO/IEC 15408-5:2022 ISO/IEC 15408-5:2022 (First Revision) |
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent | 0 | ---- | Buy | |
| 29 |
IS 1586 (Part 1) : 2018 ISO 6508-1 : 2016 Reviewed In : 2023 ISO 6508-1 : 2016 (Fifth Revision) |
Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision) | 0 | May, 2023 | Buy | |
| 30 |
IS 1586 (Part 2) : 2018 ISO 6508-2:2015 Reviewed In : 2023 ISO 6508-2:2015 (Fifth Revision) |
Metallic materials - Rockwell hardness test: Part 2 verification and calibration of testing machines and indenters (Fifth Revision) | 0 | May, 2023 | Buy | |
| 31 |
IS 1586 : 2018 ISO 18738-1 : 2012 Reviewed In : 2023 ISO 18738-1 : 2012 (Fifth Revision) |
METALLIC MATERIALS - ROCKWELL HARDNESS TEST PART 3 CALIBRATION OF REFERENCE BLOCKS | 0 | Jun, 2023 | Buy | |
| 32 |
IS 1598 : 1977 Reviewed In : 2020 (First Revision) |
Method for izod impact test of metals (First Revision) | 0 | Feb, 2020 | Download | |
| 33 |
IS 1599 : 2023 (Fifth Revision) |
Metallic materials Bend test | 0 | ---- | Buy | |
| 34 |
IS 1608 (Part 1) : 2022 (First Revision) |
Metallic materials - Tensile testing - Part 1 : Method of test at room temperature | 0 | ---- | Download | |
| 35 |
IS 1608 (Part 2) : 2020 ISO 6892-2:2018 ISO 6892-2:2018 |
Metallic Materials - Tensile Testing Part 2 Method of Test at Elevated Temperature ( Fourth Revision ) | 0 | ---- | Buy | |
| 36 |
IS 1608 (Part 3) : 2018 6892-3:2015 Reviewed In : 2023 6892-3:2015 |
Metallic materials - Tensile testing: Part 3 method of test at low temperature | 0 | Aug, 2023 | Buy | |
| 37 |
IS 16842 : 2022 (First Revision) |
Metallic materials - Fatigue testing - Fatigue crack growth method | 0 | ---- | Download | |
| 38 |
IS 16843 : 2018 ISO 12111:2011 Reviewed In : 2023 ISO 12111:2011 |
Metallic materials - Fatigue testing - Strain - Controlled thermomechanical fatigue testing method | 0 | Nov, 2023 | Buy | |
| 39 |
IS 17143 : 2023 (First Revision) |
Metallic materials Torque-controlled fatigue testing | 0 | ---- | Buy | |
| 40 |
IS 17144 (Part 1) : 2019 ISO 14577-1 : 2015 Reviewed In : 2024 ISO 14577-1 : 2015 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 1 test method | 0 | Jan, 2024 | Buy | |
| 41 |
IS 17144 (Part 2) : 2019 ISO 14577-2 : 2015 Reviewed In : 2024 ISO 14577-2 : 2015 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 2 verification and calibration of testing machines | 0 | Jan, 2024 | Buy | |
| 42 |
IS 17144 (Part 3) : 2019 ISO 14577-3 : 2015 Reviewed In : 2024 ISO 14577-3 : 2015 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 3 calibration of reference blocks | 0 | Jan, 2024 | Buy | |
| 43 |
IS 17144 (Part 4) : 2019 ISO 14577-4 : 2016 Reviewed In : 2024 ISO 14577-4 : 2016 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 4 test method for metallic and Non - Metallic coatings | 0 | Jan, 2024 | Buy | |
| 44 |
IS 17145 (Part 1) : 2019 ISO 12110-1 : 2013 Reviewed In : 2024 ISO 12110-1 : 2013 |
Metallic materials - Fatigue testing - Variable amplitude fatigue testing: Part 1 general principles, test method and reporting requirements | 0 | Jan, 2024 | Buy | |
| 45 |
IS 17145 (Part 2) : 2019 ISO 12110-2 : 2013 Reviewed In : 2024 ISO 12110-2 : 2013 |
Metallic materials - Fatigue testing - Variable amplitude fatigue testing: Part 2 cycle counting and related data reduction methods | 0 | Jan, 2024 | Buy | |
| 46 |
IS 17146 (Part 1) : 2023 (First Revision) |
Metallic materials Determination of forming-limit curves for sheet and strip Part 1: Measurement and application of forming-limit diagrams in the press shop | 0 | ---- | Buy | |
| 47 |
IS 17146 (Part 2) : 2022 ISO 23401-1:2023 ISO 23401-1:2023 (First Revision) |
Metallic materials Determination of forming-limit curves for sheet and strip Part 2: Determination of forming-limit curves in the laboratory | 0 | ---- | Buy | |
| 48 |
IS 17147 : 2019 ISO 12107 : 2012 Reviewed In : 2024 ISO 12107 : 2012 |
Metallic materials - Fatigue testing - Statistical planning and analysis of data | 0 | Jan, 2024 | Buy | |
| 49 |
IS 17149 (Part 1) : 2019 ISO 16859-1 : 2015 Reviewed In : 2024 ISO 16859-1 : 2015 |
Metallic materials - Leeb hardness test: Part 1 test method | 0 | Jan, 2024 | Buy | |
| 50 |
IS 17149 (Part 2) : 2019 ISO 16859-2 : 2015 Reviewed In : 2024 ISO 16859-2 : 2015 |
Metallic materials - Leeb hardness test: Part 2 verification and calibration of the testing devices | 0 | Jan, 2024 | Buy | |
| 51 |
IS 17149 (Part 3) : 2019 ISO 16859-3 : 2015 Reviewed In : 2024 ISO 16859-3 : 2015 |
Metallic materials - Leeb hardness test: Part 3 calibration of reference test blocks | 0 | Jan, 2024 | Buy | |
| 52 |
IS 17151 : 2023 (First Revision) |
Metallic materials Unified method of test for the determination of quasistatic fracture toughness | 0 | ---- | Buy | |
| 53 |
IS 1716 : 2023 ISO 10781:2023 ISO 10781:2023 (Third Revision) |
Metallic materials Wire Reverse bend test | 0 | ---- | Buy | |
| 54 |
IS 1717 : 2018 ISO 7800 : 2012 Reviewed In : 2023 ISO 7800 : 2012 (Fourth Revision) |
Metallic materials - Wire - Simple torsion test (Fourth Revision) | 0 | Aug, 2023 | Buy | |
| 55 |
IS 17413 (Part 1) : 2020 ISO 26203-1:2018 ISO 26203-1:2018 |
Metallic Materials - Tensile Testing at High Strain Rates Part 1 Elastic-Bar-Type Systems | 0 | ---- | Buy | |
| 56 |
IS 17413 (Part 2) : 2020 26203-2:2011 26203-2:2011 |
Metallic Materials - Tensile Testing at High Strain Rates Part 2 Servo-Hydraulic and Other Systems | 0 | ---- | Buy | |
| 57 |
IS 17414 : 2020 ISO 16630:2017 ISO 16630:2017 |
Metallic Materials — Sheet and Strip — Hole Expanding Test | 0 | ---- | Buy | |
| 58 |
IS 17415 : 2023 (First Revision) |
Metallic materials Torsion test at room temperature | 0 | ---- | Buy | |
| 59 |
IS 17416 : 2024 (First Revision) |
Metallic Materials — Charpy V-Notch Pendulum Impact Test — Instrumented Test Method (First Revision) | 0 | ---- | Buy | |
| 60 |
IS 17417 (Part 1) : 2020 ISO 4965-1:2012 ISO 4965-1:2012 |
Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 1 Testing Systems | 0 | ---- | Buy | |
| 61 |
IS 17417 (Part 2) : 2020 ISO 4965-2:2012 ISO 4965-2:2012 |
Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 2 Dynamic Calibration Device ( DCD ) Instrumentation | 0 | ---- | Buy | |
| 62 |
IS 17418 : 2020 ISO 16842 : 2014 ISO 16842 : 2014 |
Metallic Materials - Sheet and Strip - Biaxial Tensile Testing Method Using a Cruciform Test Piece | 0 | ---- | Buy | |
| 63 |
IS 17419 : 2020 ISO 17340:2014 ISO 17340:2014 |
Metallic Materials - Ductility Testing - High Speed Compression Test for Porous and Cellular Metals | 0 | ---- | Buy | |
| 64 |
IS 1755 : 2018 ISO 7802:2013 Reviewed In : 2023 ISO 7802:2013 (Second Revision) |
Metallic Materials - Wire - Wrapping test (Second Revision) | 0 | Aug, 2023 | Buy | |
| 65 |
IS 1757 (Part 1) : 2020 ISO 148-1:2016 Reviewed In : 2020 ISO 148-1:2016 (Fourth Revision) |
Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision ) | 0 | Feb, 2020 | Buy | |
| 66 |
IS 1757 (Part 2) : 2020 ISO 148-2 : 2016 ISO 148-2 : 2016 |
Metallic Materials - Charpy Pendulum Impact Test Part 2 Verification of Testing Machines ( Fourth Revision ) | 0 | ---- | Buy | |
| 67 |
IS 1757 (Part 3) : 2020 ISO 148-3:2016 ISO 148-3:2016 |
Metallic Materials - Charpy Pendulum Impact Test Part 3 Preparation and Characterization of Charpy V-notch Test Pieces for Indirect Verification of Pendulum Impact Machines ( Fourth Revision ) | 0 | ---- | Buy | |
| 68 |
IS 17679 : 2021 ISO/IEC 19752:2017 |
Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds | 0 | ---- | Buy | |
| 69 |
IS 17795 : 2022 ISO 17697 : 2016 ISO 17697 : 2016 |
Metallic materials- Uniaxial creep testing in tension - Method of test | 0 | ---- | Buy | |
| 70 |
IS 17915 : 2022 IEC 61400-50-3:2022 |
Method for evaluation of tensile properties of metallic superplastic materials | 0 | ---- | Buy | |
| 71 |
IS 17937 : 2022 |
Mechanical testing of metals Ductility testing Compression test for porous and cellular metals | 0 | ---- | Buy | |
| 72 |
IS 1828 (Part 1) : 2022 (Fifth Revision) |
METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM | 0 | ---- | Download | |
| 73 |
IS 1828 (Part 2) : 2015 ISO 7500-2:2006 Reviewed In : 2020 ISO 7500-2:2006 (First Revision) |
Metallic materials - Verification of static uniaxial testing machines: Part 2 tension creep testing machines - Verification of the applied force (First Revision) | 0 | Feb, 2020 | Buy | |
| 74 |
IS 18733 : 2024 |
Metallic materials � Sheet and strip � Earing test | 0 | ---- | Buy | |
| 75 |
IS 19024 : 2022 IEC 61557 –15 : 2014 |
Metallic materials Tube ring hydraulic pressure test | 0 | ---- | Buy | |
| 76 |
IS 2328 : 2018 ISO 8492:2013 Reviewed In : 2023 ISO 8492:2013 (Third Revision) |
Metallic materials - Tube - Flattening test (Third Revision) | 0 | Aug, 2023 | Buy | |
| 77 |
IS 2329 : 2005 ISO 8491:1998 Reviewed In : 2022 ISO 8491:1998 (Second Revision) |
Metallic materials - Tube (In Full Section) - Bend test (Second Revision) | 0 | Jan, 2022 | Buy | |
| 78 |
IS 2330 : 2018 Reviewed In : 2023 (Third Revision) |
METALLIC MATERIALS - TUBE - FLANGING TEST | 0 | Aug, 2023 | Download | |
| 79 |
IS 2335 : 2005 ISO 8493:1998 Reviewed In : 2022 ISO 8493:1998 (Second Revision) |
Metallic Materials - Tube - Drift expanding test (Second Revision) | 0 | Feb, 2022 | Buy | |
| 80 |
IS 2854 : 1990 Reviewed In : 2022 (First Revision) |
Determination of young's modulus,tangent modulus and chord modulus - Test method | 0 | Mar, 2022 | Download | |
| 81 |
IS 2855 : 1991 Reviewed In : 2020 (First Revision) |
Thermostat metals - Determinantion of flexivity (First Revision) | 0 | Feb, 2020 | Download | |
| 82 |
IS 3394 : 2024 (Second Revision) |
Electrical Resistance Alloys for Heating Elements �Accelerated Life Test ? Method of Test | 0 | ---- | Buy | |
| 83 |
IS 3394 : 1985 Reviewed In : 2022 (First Revision) |
Method for accelerated life test of electrical resistance alloys for heating elements (First Revision) | 0 | Mar, 2022 | Download | |
| 84 |
IS 3407 (Part 1) : 1983 Reviewed In : 2022 (First Revision) |
Method for creep testing of steel at elevated temperatures: Part 1 tensile creep testing (First Revision) | 0 | Mar, 2022 | Download | |
| 85 |
IS 3407 (Part 2) : 1983 Reviewed In : 2022 (First Revision) |
Method for creep testing of steel at elevated temperatures: Part 2 tensile creep stress rupture testing (First Revision) | 0 | Mar, 2022 | Download | |
| 86 |
IS 3410 : 1993 Reviewed In : 2020 (First Revision) |
Metallic materials - Determination of linear thermal expansion (First Revision) | 0 | Feb, 2020 | Download | |
| 87 |
IS 3711 : 2020 ISO 377:2017 ISO 377:2017 (Third Revision) |
Steel and Steel Products — Location and Preparation of Samples and Test Pieces for Mechanical Testing ( Third Revision ) | 0 | ---- | Buy | |
| 88 |
IS 3803 (Part 1) : 2023 ISO 10555-4:2023 ISO 10555-4:2023 (Third Revision) |
Steel - Conversion of elongation values: Part 1 carbon and low alloy steels | 0 | ---- | Buy | |
| 89 |
IS 3803 (Part 2) : 2022 ISO 5361:2023 ISO 5361:2023 (Third Revision) |
Steel Conversion of elongation values Part 2: Austenitic steels | 0 | ---- | Buy | |
| 90 |
IS 4169 : 2014 ISO 376 : 2011 Reviewed In : 2020 ISO 376 : 2011 (Second Revision) |
Metallic materials - Calibration of force proving instruments used for the verification of uniaxial testing machines (Second Revision) | 0 | Feb, 2020 | Buy | |
| 91 |
IS 4258 : 2018 ISO 18265 : 2013 Reviewed In : 2023 ISO 18265 : 2013 (Third Revision) |
Metallic materials - Conversion of hardness values (Third Revision) | 0 | Aug, 2023 | Buy | |
| 92 |
IS 5069 : 2018 ISO 23718 Reviewed In : 2023 ISO 23718 (Second Revision) |
Metallic Materials - Mechanical Testing - Vocabulary (Second Revision) | 0 | Aug, 2023 | Buy | |
| 93 |
IS 5070 : 1985 Reviewed In : 2022 (First Revision) |
Method for beam unnotched impact test for grey cast iron (First Revision) | 0 | Mar, 2022 | Download | |
| 94 |
IS 5074 : 2023 ISO 2789:2022 ISO 2789:2022 (First Revision) |
Metallic materials -- Fatigue testing -- Axial force-controlled method | 0 | ---- | Buy | |
| 95 |
IS 5075 : 2023 ISO 21549-7:2024 ISO 21549-7:2024 (Second Revision) |
METALLIC MATERIALS - ROTATING BAR BENDING FATIGUE TESTING | 0 | ---- | Buy | |
| 96 |
IS 5242 : 1979 Reviewed In : 2022 (First Revision) |
Method of test for determining shear strength of metals (First Revision) | 0 | Mar, 2022 | Download | |
| 97 |
IS 6885 (Part 1) : 2020 ISO 4545-1:2017 ISO 4545-1:2017 (Second Revision) |
Metallic Materials — Knoop Hardness Test Part 1 Test Method ( Second Revision ) | 0 | ---- | Buy | |
| 98 |
IS 6885 (Part 2) : 2020 ISO 4545-2:2017 ISO 4545-2:2017 (Second Revision) |
Metallic Materials — Knoop Hardness Test Part 2 Verification and Calibration of Testing Machines ( Second Revision ) | 0 | ---- | Buy | |
| 99 |
IS 6885 (Part 3) : 2020 ISO 4545-3:2017 ISO 4545-3:2017 (Second Revision) |
Metallic Materials — Knoop Hardness Test Part 3 Calibration of Reference Blocks ( Second Revision ) | 0 | ---- | Buy | |
| 100 |
IS 6885 (Part 4) : 2020 ISO 4545-4:2017 ISO 4545-4:2017 (Second Revision) |
Metallic Materials — Knoop Hardness Test Part 4 Tables of Hardness Values ( Second Revision ) | 0 | ---- | Buy | |
| 101 |
IS 6886 : 1973 Reviewed In : 2022 |
Method of dynamic force calibration of axial load fatigue testing machines by means of a strain gauge technique | 0 | Mar, 2022 | Download | |
| 102 |
IS 7096 : 1981 Reviewed In : 2022 Reaffirmed but not taken up for revision (First Revision) |
Method for scleroscope hardness testing of metallic materials (first Revision) | 0 | Mar, 2022 | Download | |
| 103 |
IS 7172 : 1984 Reviewed In : 2022 Reaffirmed but not taken up for revision (First Revision) |
Method for verification of scleroscope hardness testing machines (First Revision) | 0 | Mar, 2022 | Download | |
| 104 |
IS 8632 : 2023 (First Revision) |
Metallic materials Designation of test specimen axes in relation to product texture | 0 | ---- | Buy |