Total Standards : 55
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10124 : Part 13 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 ½o BENDS | 0 | Apr, 2019 | Buy | |
| 2 | IS 7834 : Part 6 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 6 Specific Requirements for Sockets (First Revision) | 0 | May, 2018 | Buy | |
| 3 | IS 16462 : 2016/ISO 9080 : 2012 |
Plastic Piping and Ducting Systems - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials in Pipe Form by Extrapolation | 0 | Mar, 2021 | Buy | |
| 4 | IS 12231 : 1987 |
Specification for Unplasticized PVC Pipes for Use in Suction and Delivery Lines of Agricultural Pump Sets | 1 | May, 2018 | Buy | |
| 5 | IS 15265 : 2003 |
Flexible PVC Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines of Agricultural Pumps - Specification | 2 | May, 2018 | Download | |
| 6 | IS 16098 Part 2 : 2013 |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage – Specification: Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B | 2 | Jun, 2022 | Buy | |
| 7 | IS 7834 : Part 1 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 1 General requirements (First Revision) | 1 | May, 2018 | Buy | |
| 8 | IS 10124 : Part 5 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 5 Specific Requirements for Equal Tees (Second Revision) | 0 | Apr, 2019 | Buy | |
| 9 | SP 57 (QAWSM) : 1993 |
Handbook on pipes and fittings for drinking water supply | 0 | Mar, 2016 | Download | |
| 10 | IS 17544 : 2022 |
Multilayer PE-AL-PE Plastic Piping Systems for Indoor Gas Installations with a Maximum Operating Pressure up to and Including 500 KPA 5 bar - Specificaiton | 0 | ---- | Buy | |
| 11 | IS 13593 : 1992 |
UPVC Pipe Fittings for Use with the UPVC Pipes in the Suction and Delivery Lines of Agricultural Pumps -Specification | 1 | Jun, 2022 | Buy | |
| 12 | IS 4984 : 2016 (5 Revision) |
Polyethylene Pipes for Water Supply - Specification (Fifth Revision) | 2 | Jul, 2021 | Buy | |
| 13 | IS 10124 : Part 12 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 12 Specific Requirements for 22½ Degree Bends (Second Revision) | 0 | Apr, 2019 | Buy | |
| 14 | IS 7834 : Part 5 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies : Part 5 Specific Requirements for 45 degree Tees (First Revision) | 0 | May, 2018 | Buy | |
| 15 | IS 10124 : Part 9 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 9 Specific Requirements for 60 Degree Bends (Second Revision) | 0 | Apr, 2019 | Buy | |
| 16 | IS 16130 : 2014/ISO 12162 : 2009 |
Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification, Designation and Design Coefficient | 0 | Buy | ||
| 17 | IS 14787 : 2000 |
Unplasticized PVC Pipes (Ducts) and Fittings for Underground Telecommunications Cable Installation - Specification | 1 | Mar, 2020 | Download | |
| 18 | IS 16098 Part 1 : 2013 |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage - Specification: Part 1 Pipes and Fittings with Smooth External Surface, Type A | 2 | Jun, 2022 | Buy | |
| 19 | IS 7634 : Part 2 : 2012 (1 Revision) |
Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice: Part 2 Laying and Jointing of Polyethylene (PE) Pipes (First Revision) | 0 | Jun, 2022 | Buy | |
| 20 | IS 10124 : Part 4 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 4 Specific Requirements for Caps (Second Revision) | 0 | Apr, 2019 | Buy | |
| 21 | IS 9271 : 2004 (1 Revision) |
Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage - Specification (First Revision) | 3 | Apr, 2019 | Download | |
| 22 | IS 17546 : 2021 |
Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification | 0 | ---- | Buy | |
| 23 | IS 12818 : 2010 (2 Revision) |
Unplasticized Polyvinyl Chloride (PVC-U) Screen and Casing Pipes for Bore/Tubewells - Specification (Second Revision) | 3 | Mar, 2021 | Download | |
| 24 | IS 15801 : 2008 |
Polypropylene - Random Copolymer Pipes for Hot and Cold Water Supplies - Specification | 1 | Jun, 2022 | Buy | |
| 25 | IS 10124 : Part 11 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 11 Specific Requirements for 30 Degree Bends (Second Revision) | 0 | Apr, 2019 | Buy | |
| 26 | IS 7834 : Part 4 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 4 Specific Requirements for 90 Degree Tees (First Revision) | 0 | May, 2018 | Buy | |
| 27 | IS 10124 : Part 8 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 8 Specific Requirements for 90 Degree Bends (Second Revision) | 0 | Apr, 2019 | Buy | |
| 28 | IS 15927 : Part 1 : 2012 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 1 Fittings for Socket Fusion Using Heated Tools | 0 | Jan, 2022 | Buy | |
| 29 | IS 14735 : 1999 |
Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - Specification | 5 | Apr, 2019 | Buy | |
| 30 | IS 13592 : 2013 (1 Revision) |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buildings Including Ventilation and Rain Water System - Specification (First Revision) | 2 | May, 2018 | Buy | |
| 31 | IS 7634 : Part 3 : 2003 (1 Revision) |
Plastics Pipe Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice: Part 3 Laying and Jointing of UPVC Pipes (First Revision) | 0 | May, 2018 | Buy | |
| 32 | IS 10124 : Part 3 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 3 Specific Requirements for Straight Reducers (Second Revision) | 0 | Apr, 2019 | Buy | |
| 33 | IS 7834 : Part 8 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 8 Specific Requirements for Caps (First Revision) | 0 | May, 2018 | Buy | |
| 34 | IS 16647 : 2017 |
Oriented Unplasticized Polyvinyl Chloride (PVC-O) Pipes for Water Supply - Specification | 1 | Jun, 2022 | Buy | |
| 35 | IS 12709 : 1994 (1 Revision) |
Glass-Fibre Reinforced Plastics (GRP) Pipes, Joints and Fittings for Use for Potable Water Supply - Specification (First Revision) | 5 | Apr, 2019 | Buy | |
| 36 | IS 15778 : 2007 |
Chlorinated Polyvinyl Chloride (CPVC) Pipes for Potable Hot and Cold Water Distribution Supplies - Specification | 4 | Jun, 2022 | Buy | |
| 37 | IS 10124 : Part 10 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 10 Specific Requirements for 45 Degree Bends (Second Revision) | 0 | Apr, 2019 | Buy | |
| 38 | IS 7834 : Part 3 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 3 Specific Requirements for 90 Degree elbows (First revision) | 0 | May, 2018 | Buy | |
| 39 | IS 10124 : Part 7 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 7 Specific Requirements for Threaded Adaptors (Second Revision) | 0 | Apr, 2019 | Buy | |
| 40 | IS 15927 : PART 2 : 2012 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 2 Spigot Fittings for Butt Fusion for Socket Fusion Using Heated Tools and for Use with Electro Fusion Fittings | 0 | Jan, 2022 | Buy | |
| 41 | IS 8360 : 2022 |
Fabricated Polyethylene Fittings for Water Supply � Specification (First Revision) | 0 | ---- | Buy | |
| 42 | IS 14402 : 1996 |
Glass Fibre Reinforced Plastics (GRP) Pipes, Joints and Fittings for Use for Sewerage, Industrial Waste and Water (Other than Potable) - Specification | 2 | Jan, 2022 | Buy | |
| 43 | IS 7634 : Part 1 : 1975 |
Code of Practice for Plastics Pipe Work for Potable Water Supplies: Part 1 Choice of Materials and General Recommendations | 2 | Jun, 2022 | Buy | |
| 44 | IS 10124 : Part 2 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 2 Specific Requirements for Sockets (Second Revision) | 0 | Apr, 2019 | Buy | |
| 45 | IS 7834 : Part 7 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 7 Specific Requirements for Unions (First Revision) | 0 | May, 2018 | Buy | |
| 46 | IS 16268 : 2017/ISO/TR 10358 : 1993 |
Plastic Pipes and Fittings - Combined Chemical-Resistance Classification Table | 0 | Mar, 2022 | Buy | |
| 47 | IS 12235 : Part 1 to 19 : 2004 (1 Revision) |
Thermoplastics Pipes and Fittings - Methods of Test (First Revision) | 0 | Apr, 2019 | Buy | |
| 48 | IS 15328 : 2003 |
Unplasticized Non-Pressure Polyvinyl Chloride (PVC-U) Pipes for Use in Underground Drainage and Sewerage Systems - Specification | 7 | May, 2018 | Buy | |
| 49 | IS 10124 : Part 1 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 1 General Requirements (Second Revision) | 2 | Apr, 2019 | Buy | |
| 50 | IS 7834 : Part 2 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 2 Specific Requirements for 45 Degrees Elbows (First Revision) | 0 | May, 2018 | Buy | |
| 51 | IS 10124 : Part 6 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 6 Specific Requirements for Flanged Tail Pieces with Metallic Flanges (Second Revision) | 0 | Apr, 2019 | Buy | |
| 52 | IS 15927 : PART 3 : 2011 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 3 Electro Fusion Fittings | 0 | Mar, 2021 | Buy | |
| 53 | IS 8008 : 2022 |
Injection Moulded/Machined Polyethylene Fittings for Water Supply � Specification ( Second Revision ) | 0 | ---- | Buy | |
| 54 | IS 13916 : 1994 |
Installation of Glassfibre Reinforced Plastic (GRP) Piping System - Code Of Practice | 0 | Apr, 2019 | Buy | |
| 55 | IS 4985 : 2021 (4 Revision) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision | 1 | ---- | Buy |