SNo |
IS Number |
Title |
Technical Committee |
1 |
IS 4558 : 1995 |
Under - Drainage of lined canals - Code of practice (Second Revision) |
WRD 13 |
2 |
IS 6295 : 1986 |
Code of practice for water supply and drainage in high altitudes and/or sub - Zero temperature regions (First Revision) |
CED 24 |
3 |
IS 8419 : Part 2 : 1984 |
Requirements for rapid sand gravity filtration equipment: Part 2 underdrainage system |
CED 24 |
4 |
IS 10553 : Part 2 : 1983 |
Requirements for chlorination equipment: Part 2 Vacuum feed type chlorinators |
CED 24 |
5 |
IS 10553 : Part 4 : 1983 |
Requirements for chlorination equipment: Part 4 Gravity feed type gaseous chlorinators |
CED 24 |
6 |
IS 1742 : 1983 |
Code of practice for building drainage (second revision) |
CED 24 |
7 |
IS 2065 : 1983 |
Code of practice for water supply in buildings (Second Revision) |
CED 24 |
8 |
IS 9758 : 1981 |
Specification for flush valves and fittings for water closets and urinals |
CED 3 |
9 |
SP 62 : 1997 |
Handbook on causes and prevention of cracks in buildings |
CED 13 |
10 |
IS 14536 : 2018 |
Selection, installation, operation and maintenance of submersible pumpset - Code of practice (First Revision) |
MED 20 |
11 |
IS 10804 : Part 1 : 2018 |
Recommended pumping systems for agricultural purposes: Part 1 surface pumps (Third Revision) |
MED 20 |
12 |
SP 35 (S&T) : 1987 |
Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing) |
CED 24 |
13 |
SP 7 : 2016 |
National building code of India: Part 0 integrated approach - Prerequisite for applying provisions of the code |
CED 46 |
14 |
IS 10124 : Part 2 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 2 Specific Requirements for Sockets (Second Revision) |
CED 50 |
15 |
IS 10124 : Part 3 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 3 Specific Requirements for Straight Reducers (Second Revision) |
CED 50 |
16 |
IS 10124 : Part 4 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 4 Specific Requirements for Caps (Second Revision) |
CED 50 |
17 |
IS 10124 : Part 5 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 5 Specific Requirements for Equal Tees (Second Revision) |
CED 50 |
18 |
IS 10124 : Part 6 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 6 Specific Requirements for Flanged Tail Pieces with Metallic Flanges (Second Revision) |
CED 50 |
19 |
IS 10124 : Part 7 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 7 Specific Requirements for Threaded Adaptors (Second Revision) |
CED 50 |
20 |
IS 10124 : Part 8 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 8 Specific Requirements for 90 Degree Bends (Second Revision) |
CED 50 |
21 |
IS 10124 : Part 9 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 9 Specific Requirements for 60 Degree Bends (Second Revision) |
CED 50 |
22 |
IS 10124 : Part 10 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 10 Specific Requirements for 45 Degree Bends (Second Revision) |
CED 50 |
23 |
IS 10124 : Part 11 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 11 Specific Requirements for 30 Degree Bends (Second Revision) |
CED 50 |
24 |
IS 10124 : Part 12 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 12 Specific Requirements for 22½ Degree Bends (Second Revision) |
CED 50 |
25 |
IS 10124 : Part 13 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 ½o BENDS |
CED 50 |
26 |
IS 13592 : 2013 |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buildings Including Ventilation and Rain Water System - Specification (First Revision) |
CED 50 |
27 |
IS 13593 : 1992 |
UPVC Pipe Fittings for Use with the UPVC Pipes in the Suction and Delivery Lines of Agricultural Pumps -Specification |
CED 50 |
28 |
IS 15328 : 2003 |
Unplasticized Non-Pressure Polyvinyl Chloride (PVC-U) Pipes for Use in Underground Drainage and Sewerage Systems - Specification |
CED 50 |
29 |
IS 15778 : 2007 |
Chlorinated Polyvinyl Chloride (CPVC) Pipes for Potable Hot and Cold Water Distribution Supplies - Specification |
CED 50 |
30 |
IS 7634 : Part 1 : 1975 |
Code of Practice for Plastics Pipe Work for Potable Water Supplies: Part 1 Choice of Materials and General Recommendations |
CED 50 |
31 |
IS 7634 : Part 3 : 2003 |
Plastics Pipe Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice: Part 3 Laying and Jointing of UPVC Pipes (First Revision) |
CED 50 |
32 |
IS 7834 : Part 1 : 1987 |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 1 General requirements (First Revision) |
CED 50 |
33 |
IS 9271 : 2004 |
Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage - Specification (First Revision) |
CED 50 |
34 |
SP 57 (QAWSM) : 1993 |
Handbook on pipes and fittings for drinking water supply |
CED 50 |
35 |
IS 3342 : 1998 |
Soil Working Equipment - Cultivators, Animal Drawn - Specification (Second Revision) |
FAD 11 |
36 |
IS 10804 : Part 2 : 2018 |
Recommended pumping systems for agricultural purposes: Part 2 submersible pump sets (Third Revision) |
MED 20 |
37 |
IS 16647 : 2017 |
Oriented Unplasticized Polyvinyl Chloride (PVC-O) Pipes for Water Supply - Specification |
CED 50 |
38 |
IS 8472 : 2019 |
Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision) |
MED 20 |
39 |
IS 5758 : 1984 |
Precast Concrete Kerbs, Channels, Edgings, Quadrants and Gutter Aprons |
CED 53 |
40 |
IS 774 : 2004 |
Flushing cisterns for water closets and urinals (Other Than Plastic Cisterns) - Specification (Fifth Revision) |
CED 3 |
41 |
IS 7231 : 1994 |
plastic flushing cisterns for waterclosets and urinals |
CED 3 |