| S.No. | Project Code | Title of The Project | Terms of Reference | Committee | Department | No Of Proposal |
|---|---|---|---|---|---|---|
| 1 | TED 0285 | Study of Windscreen Wiping and Washing Systems and their Components | View | TED(11) | Transport Engineering Department | 2 |
| 2 | WRD 0284 | Study on Installation, Commissioning, and Observations of Stress Measuring Devices in Concrete and Masonry Dams | View | WRD(16) | Water Resources Department | 6 |
| 3 | WRD 0283 | Study of Performance Monitoring and Surveillance of Hydraulic Structures | View | WRD(16) | Water Resources Department | 8 |
| 4 | WRD 0282 | Study of Structural Design of Stoplogs | View | WRD(12) | Water Resources Department | 3 |
| 5 | WRD 0281 | Study of Automation of Radial Gates | View | WRD(12) | Water Resources Department | 4 |
| 6 | SSD 0280 | Study of operations, best practices and services parameters to establish framework for requirements of services for packers and movers service providers. | View | SSD(1) | Service Sector Department | 1 |
| 7 | SSD 0279 | Study of the E-commerce Logistics operations and services parameters to frame guidelines and requirements for e-logistics service providers | View | SSD(18) | Service Sector Department | 3 |
| 8 | LITD 0278 | Study of requirements and test methods for Fixed surface mount resistors for use in electronic equipment | View | LITD(5) | Electronics and Information Technology Department | 2 |
| 9 | MED 0277 | Maximum service life of LPG cylinders (as per IS 3196-1) and reconditioned cylinders (as per IS 13258) | View | MED(16) | Mechanical Engineering Department | 8 |
| 10 | TXD 0276 | Study on effect of constructional parameters on performance of cotton tapes for Aeronautical Applications. | View | TXD(13) | Textiles Department | 2 |
| 11 | TXD 0275 | Study of Constructional particulars and performance requirements for handloom cotton voile | View | TXD(8) | Textiles Department | 2 |
| 12 | TXD 0274 | Study of Constructional particulars and performance requirements for scoured cotton khadi Mazri. | View | TXD(8) | Textiles Department | 2 |
| 13 | TXD 0273 | Study of the constructional and performance requirements for jute geotextiles used in rainwater erosion control in road and railway embankment and hill slopes | View | TXD(30) | Textiles Department | 3 |
| 14 | TXD 0272 | Study to develop a standard test method for determination of lint and trash content of cotton | View | TXD(1) | Textiles Department | 3 |
| 15 | TXD 0271 | Study construction, performance and safety requirements of prevailing varieties of Elastic Narrow Tapes. | View | TXD(39) | Textiles Department | 2 |
| 16 | WRD 0270 | Study of Water-stops Used at Transverse Contraction Joints in Masonry and Concrete Dams | View | WRD(9) | Water Resources Department | 2 |
| 17 | LITD 0269 | Study of criteria for symmetric-key ciphers for possible inclusion in IS/ISO/IEC 18033 series | View | LITD(17) | Electronics and Information Technology Department | 11 |
| 18 | LITD 0268 | Validation of ‘Operating life test’ for Television (TV) as given in IS 18112 | View | LITD(7) | Electronics and Information Technology Department | 1 |
| 19 | LITD 0267 | Study for determination of optimal operating life of Television Sets (TVs) and collection of data related to Manufacturing of Televisions | View | LITD(7) | Electronics and Information Technology Department | 2 |
| 20 | LITD 0266 | Analysis of the standards ISO/IEC 15944-8:2012 Business Operational view – Part 8 Identification of privacy protection requirements as external constraints on business transactions, and their suitability for adoption as Indian Standards as per National Industrial Ecosystem. | View | LITD(15) | Electronics and Information Technology Department | 2 |
| 21 | LITD 0265 | Repository of Brain Computer Interfaces (BCI) - Use Cases | View | LITD(37) | Electronics and Information Technology Department | 7 |
| 22 | LITD 0264 | Study & comparative analysis of Tokenization schemes for North East (NE) Indian Languages | View | LITD(20) | Electronics and Information Technology Department | 5 |
| 23 | SSD 0263 | A comprehensive study on the management of mobile toilets. | View | SSD(14) | Service Sector Department | 5 |
| 24 | LITD 0262 | Study & comparative analysis of Part-of-Speech (PoS) Tagsetting schemes for Northeast Indian Languages | View | LITD(20) | Electronics and Information Technology Department | 3 |
| 25 | LITD 0261 | Study of Learning Record Store Interoperability Augmented by Blockchain | View | LITD(19) | Electronics and Information Technology Department | 12 |
| 26 | SSD 0260 | A comprehensive study on decentralized wastewater management systems. | View | SSD(14) | Service Sector Department | 6 |
| 27 | LITD 0259 | Implementation of the 2-D Assessment System in Confidence Based Learning (CBL) | View | LITD(19) | Electronics and Information Technology Department | 5 |
| 28 | SSD 0258 | Comprehensive study of the principles, processes, and procedures to conduct a water audit in water utility to evaluate water use efficiency | View | SSD(14) | Service Sector Department | 8 |
| 29 | PCD 0256 | Study on Pyrolysis Oil for Determination of Correlation Amongst Feedstock Composition, Manufacturing Technology, and Performance Characteristic | View | PCD(3) | Petroleum, Coal and Related Products Department | 8 |
| 30 | SSD 0255 | Research on Human Resources in Services | View | SSD(19) | Service Sector Department | 1 |
| 31 | TED 0254 | Study for reviewing Performance requirements for Constant Speed Compression Ignition (CI) Internal combustion engines | View | TED(2) | Transport Engineering Department | 6 |
| 32 | SSD 0253 | Study of usage and implementation of published Indian standards in Banking and Financial Services Sector | View | SSD(3) | Service Sector Department | 1 |
| 33 | SSD 0252 | Study of the cloud services ecosystem and map against existing standards, and identify the gap areas for Standardization | View | SSD(10) | Service Sector Department | 7 |
| 34 | SSD 0251 | Study of tourism destinations to establish framework & model guidelines for tourism destinations of different verticals which can be effectively practiced by Destination Management Organization | View | SSD(2) | Service Sector Department | 2 |
| 35 | AYD 0250 | Development of the Performance parameters for commercial Potentizer in Homoeopathy. | View | AYD(7) | Ayush Department | 1 |
| 36 | SSD 0249 | Study of Greenbelt Development and Management for Projects and Activities. | View | SSD(7) | Service Sector Department | 5 |
| 37 | MTD 0248 | Study of grades and chemical and mechanical properties of seamless ferritic alloy steel pipes and fittings for high-temperature steam service | View | MTD(19) | Metallurgical Engineering Department | 2 |
| 38 | MTD 0247 | Study of grades and properties of seamless and welded pipes and fittings for sub-zero temperature service | View | MTD(19) | Metallurgical Engineering Department | 2 |
| 39 | MTD 0246 | Study the grades, chemical and physical properties, and various shapes and sizes of stainless steel pipe fittings | View | MTD(19) | Metallurgical Engineering Department | 3 |
| 40 | AYD 0241 | Development of Specifications for Therapeutic equipments used in Ayurveda | View | AYD(1) | Ayush Department | 1 |
| 41 | AYD 0240 | Analysis of Safety and Quality parameters for Kudineer Tablet (Tablet from Decoction). | View | AYD(5) | Ayush Department | 2 |
| 42 | CED 0237 | Study on physical and uniformity test requirements of chemical admixtures used in making cement concrete. | View | CED(2) | Civil Engineering Department | 16 |
| 43 | PGD 0236 | Study of safety, performance and constructional requirement for cricket ball used in the game of cricket. | View | PGD(41) | Production and General Engineering Department | 4 |
| 44 | PGD 0235 | Study of different grades and different types of Abdomen Guards used in sports | View | PGD(41) | Production and General Engineering Department | 4 |
| 45 | PCD 0234 | Study on Safety and quality aspects of Positive List of Constituents for Polymers in contact with foodstuffs, pharmaceuticals and drinking water | View | PCD(12) | Petroleum, Coal and Related Products Department | 2 |
| 46 | PCD 0233 | Study on Safety and quality aspects of Acrylic Acid copolymer, its various applications and testing methodologies. | View | PCD(12) | Petroleum, Coal and Related Products Department | 3 |
| 47 | PCD 0232 | Study of inter-conversion data of units used in the estimation of percentages of ethanol in ethanol-water mixtures. | View | PCD(9) | Petroleum, Coal and Related Products Department | 4 |
| 48 | PCD 0231 | Study on Safety and quality aspects of Ethylene methacrylic acid (EMAA), its various applications and testing methodologies. | View | PCD(12) | Petroleum, Coal and Related Products Department | 1 |
| 49 | CHD 0226 | Study on the various testing methods used for determination of the determination of particulate matter in a moving gas stream in confined space i.e Stationary source such as ducts, chimneys and flues for qualitative and quantitative measurements. | View | CHD(35) | Chemical Department | 4 |
| 50 | FAD 0224 | Optimization of Recovery Efficiency of Reverse Osmosis-Based Point-Of-Use Water Treatment Systems | View | FAD(30) | Food and Agriculture Department | 3 |
| 51 | FAD 0223 | Study of Good Agricultural Practices for Flue-cured Virginia [FCV] Tobacco and Bidi tobacco | View | FAD(4) | Food and Agriculture Department | 1 |
| 52 | FAD 0222 | Development of the LC based test method for determination of active ingredient in technical grade triallate and its formulation and validation of newly developed test method. | View | FAD(1) | Food and Agriculture Department | 1 |
| 53 | FAD 0221 | Development of LC based method for determination of active ingredient in malathion and its validation. | View | FAD(1) | Food and Agriculture Department | 2 |
| 54 | FAD 0220 | Comparative study for the measurement of colour of vegetable oils, fats and fatty acids by manual and automatic tintometer. | View | FAD(13) | Food and Agriculture Department | 3 |
| 55 | FAD 0218 | Development of test method(s) for determination of degree of milling of rice | View | FAD(16) | Food and Agriculture Department | 4 |
| 56 | FAD 0217 | Study of Fish Feed for ornamental fisheries, for determining its Quality and Safety Parameters. | View | FAD(12) | Food and Agriculture Department | 2 |
| 57 | FAD 0216 | Study on Performance and Safety Requirements of Tractor-Operated Potato Digger Shaker | View | FAD(11) | Food and Agriculture Department | 3 |
| 58 | FAD 0214 | Study of Asafoetida for determining its quality and safety parameters. | View | FAD(9) | Food and Agriculture Department | 5 |
| 59 | MTD 0213 | Study of quality requirements of grades of Hot-rolled and cold-rolled Stainless Steels used for structural purposes | View | MTD(16) | Metallurgical Engineering Department | 9 |
| 60 | MTD 0212 | Study of quality requirements of carbon steel forgings for shipbuilding industry | View | MTD(16) | Metallurgical Engineering Department | 3 |
| 61 | MTD 0211 | Study of quality requirements of grades of steel billets, bars and sections for boilers | View | MTD(4) | Metallurgical Engineering Department | 2 |
| 62 | MTD 0210 | Study of quality requirements of grades of Hot-rolled medium and high carbon steel sheet, plate and strip used for general engineering purposes | View | MTD(4) | Metallurgical Engineering Department | 6 |
| 63 | MTD 0209 | Study of various methods used for determining the thickness of centrifugally cast (Spun) ductile iron pressure pipes for water, and sewage, and suggest the thickness of pipes along with relevant internal and external protection systems, joints and performance test(s) best suited for Indian conditions | View | MTD(6) | Metallurgical Engineering Department | 1 |
| 64 | LITD 0183 | Survey of Standards on Environmental Testing Procedures | View | LITD(1) | Electronics and Information Technology Department | 8 |
| 65 | MTD 0181 | Study of methods of test for phosphate coatings for determination of characteristics of phosphate coatings on metallic substrate. | View | MTD(24) | Metallurgical Engineering Department | 3 |
| 66 | MTD 0179 | Study on the classification, recommended practices, requirements and test methods for chromate conversion coatings on aluminium and aluminium alloys. | View | MTD(24) | Metallurgical Engineering Department | 11 |
| 67 | MED 0177 | Determine the technical requirements of industrial oil-fired burners | View | MED(26) | Mechanical Engineering Department | 4 |
| 68 | LITD 0176 | Development and Validation of test method for Hardware Security Assessment of Electronic products / Field Equipment used in the Power System SCADA | View | LITD(10) | Electronics and Information Technology Department | 2 |
| 69 | TXD 0175 | Study for determining the cutoff grade and sampling plan for Mulberry Raw Silk. | View | TXD(28) | Textiles Department | 1 |
| 70 | TXD 0174 | Study of construction and performance requirements of 1 kg, 2 kg and 5 kg leno woven sacks. | View | TXD(23) | Textiles Department | 1 |
| 71 | TXD 0173 | Study of fibre characteristics requirement for grading of uncut Indian Mesta and uncut Indian Bimli by hand and eye method; and instrumental method. | View | TXD(3) | Textiles Department | 1 |
| 72 | TXD 0172 | To study the packaging practices of jute and jute products for internal and exports trades. | View | TXD(3) | Textiles Department | 2 |
| 73 | TXD 0171 | Study of constructional and performance requirement of synthetic tarpaulins (heavy duty protective covers) made from nylon or polyester coated fabrics | View | TXD(33) | Textiles Department | 1 |
| 74 | TXD 0170 | Study of safety and performance requirements of fire hoods for firefighter. | View | TXD(32) | Textiles Department | 1 |
| 75 | TXD 0169 | Study construction, performance and safety requirements of prevailing varieties of Woven Ground Covers for Horticulture Application. | View | TXD(35) | Textiles Department | 1 |
| 76 | MSD 0168 | Study and Critical Analysis of Different Preparation Methods of Flexographic plates | View | MSD(6) | Management and Systems Department | 1 |
| 77 | MSD 0167 | Study on Production Control activity | View | MSD(4) | Management and Systems Department | 3 |
| 78 | MSD 0166 | Development of impact assessment framework/matrix aimed at evaluating the effectiveness of sustainable finance activities concerning ESG and SDG factors. | View | MSD(18) | Management and Systems Department | 3 |
| 79 | MSD 0165 | Study of Service Quality provided by Public Service Organizations | View | MSD(2) | Management and Systems Department | 7 |
| 80 | MSD 0164 | Study of Social Accountability at the Work Place | View | MSD(10) | Management and Systems Department | 5 |
| 81 | MSD 0163 | Study of Prevention and Control of Fraud and Corruption by an Organization | View | MSD(10) | Management and Systems Department | 3 |
| 82 | MHD 0162 | Study of Vortex Mixer specifications | View | MHD(10) | Medical Equipment and Hospital Planning Department | 2 |
| 83 | MHD 0160 | Study of the general and functional requirements of High Tech – Repetitive Transcranial Magnetic Stimulator (RTMS) | View | MHD(7) | Medical Equipment and Hospital Planning Department | 1 |
| 84 | MHD 0159 | Methodology for performance evaluation of HIV Diagnostic Test Kit | View | MHD(19) | Medical Equipment and Hospital Planning Department | 1 |
| 85 | MHD 0158 | Methodology for performance evaluation of Laparoscopic Devices | View | MHD(1) | Medical Equipment and Hospital Planning Department | 1 |
| 86 | MED 0157 | Development of Test Method for Bisphenol A (BPA) analysis in PTFE coating used on Utensils and Polymer used in Bottles | View | MED(33) | Mechanical Engineering Department | 2 |
| 87 | MED 0156 | A Comprehensive Study on Computer to Plate (CTP) Offset Printing Machines | View | MED(25) | Mechanical Engineering Department | 1 |
| 88 | MHD 0155 | Study and comparative analysis of functional and safety requirements of ophthalmic surgical instruments. | View | MHD(5) | Medical Equipment and Hospital Planning Department | 1 |
| 89 | MHD 0154 | Study and comparative analysis of functional and safety requirements of ocular prosthesis. | View | MHD(5) | Medical Equipment and Hospital Planning Department | 2 |
| 90 | MED 0153 | Study of latest technological developments and practices in the life cycle of Non-Calibrated round steel link lifting chains and chain slings. | View | MED(14) | Mechanical Engineering Department | 1 |
| 91 | MHD 0152 | Study and comparative analysis of functional and safety requirements of Lacrimal intubation stent. | View | MHD(5) | Medical Equipment and Hospital Planning Department | 2 |
| 92 | MED 0151 | Study of latest technological developments and practices in the life cycle of portal and semi-Portal wharf cranes. | View | MED(14) | Mechanical Engineering Department | 2 |
| 93 | MED 0150 | Study of latest technological developments and practices in the life cycle of shell and tube type heat exchangers. | View | MED(1) | Mechanical Engineering Department | 5 |
| 94 | MHD 0149 | Study and comparative analysis of functional and safety requirements of Minimally-Invasive Glaucoma Surgical (MIGS) Devices. | View | MHD(5) | Medical Equipment and Hospital Planning Department | 3 |
| 95 | MED 0148 | Study of latest technological developments and practices in the life cycle of Eyenut with Collar for lifting purposes. | View | MED(14) | Mechanical Engineering Department | 3 |
| 96 | MED 0147 | Study of latest technological developments and practices in the life cycle of Unfired Pressure Vessels. | View | MED(1) | Mechanical Engineering Department | 4 |
| 97 | MHD 0146 | Study of general and functional requirements concerning safety and performance of Arthroscopy Systems including the methods of tests. | View | MHD(2) | Medical Equipment and Hospital Planning Department | 1 |
| 98 | MHD 0145 | Exploring and Analyzing Safety and Quality Standards for Positioners and Restrainers used during Sample Collection, Surgeries, and Radiological Procedures of both Large and Small Animals. | View | MHD(13) | Medical Equipment and Hospital Planning Department | 1 |
| 99 | MTD 0144 | Study of the requirements for Solid resins for preparation of resin coated sand (RCS) by hot coating technique for use in foundries | View | MTD(14) | Metallurgical Engineering Department | 2 |
| 100 | MTD 0143 | Study of the requirements of Iron oxide powder for use in foundries | View | MTD(14) | Metallurgical Engineering Department | 1 |
| 101 | MTD 0142 | Study of grades, chemical and mechanical properties of ‘High strength steel castings for general engineering and structural purposes’. | View | MTD(14) | Metallurgical Engineering Department | 2 |
| 102 | MTD 0141 | Study of grades, chemical and mechanical properties of ‘Austenitic- Manganese steel castings’. | View | MTD(14) | Metallurgical Engineering Department | 3 |
| 103 | MTD 0140 | Study and Identification of critical parameters for classification of refractory insulating bricks/shaped insulating products | View | MTD(15) | Metallurgical Engineering Department | 6 |
| 104 | MTD 0139 | Study of grades, chemical, mechanical and physical properties and applications of Pure Molybdenum and Molybdenum alloy plate, sheet, strip, and foil | View | MTD(9) | Metallurgical Engineering Department | 3 |
| 105 | MTD 0138 | Study of chemical composition of various Aluminium Utensils available in Indian Market | View | MTD(7) | Metallurgical Engineering Department | 1 |
| 106 | MTD 0137 | Study the Gravimetric (fire assay) test method for analyzing refined bullion containing gold content above 999.5 up to and including 999.9 fineness | View | MTD(10) | Metallurgical Engineering Department | 2 |
| 107 | ETD 0136 | Calculation of thermally permissible short-circuit currents in low voltage, direct current electrical installations. | View | ETD(50) | Electrotechnical Department | 8 |
| 108 | ETD 0135 | To define environmental friendliness rating for electrotechnical products. | View | ETD(43) | Electrotechnical Department | 5 |
| 109 | ETD 0134 | Study of Methodology of Endurance Testing of Electric Food – Mixers (Liquidizers And Grinders) & Centrifugal Juicers” and its various components. | View | ETD(32) | Electrotechnical Department | 1 |
| 110 | ETD 0131 | Study of advanced testing methods used in India for testing of single - Phase AC and universal motors. | View | ETD(15) | Electrotechnical Department | 1 |
| 111 | CED 0128 | Study of durability properties of composite cement (a type of hydraulic cement) currently being manufactured by the cement industry in India. | View | CED(2) | Civil Engineering Department | 5 |
| 112 | TED 0127 | Study of marine heat exchangers for use on-board ships | View | TED(19) | Transport Engineering Department | 2 |
| 113 | TXD 0126 | Development and validation of test method for determination of index ingredient of textiles dyed with tectona grandis, terminalia arjuna, canna indica, impatiens balsamina | View | TXD(7) | Textiles Department | 1 |
| 114 | TXD 0125 | Development and validation of test method for determination of index ingredient from plant-based indigo and textiles dyed with plant-based indigo by using Carbon-14 (C-14) analysis. | View | TXD(7) | Textiles Department | 2 |
| 115 | CED 0124 | Literature review, market and industry survey, and performance assessment of different type of tower bolts used in doors and windows (a builder’s hardware) manufactured and/or available in Indian market. | View | CED(15) | Civil Engineering Department | 3 |
| 116 | CED 0123 | Study on the Performance and Construction Requirements of Small, Single-Use, Fire Extinguishers of Disposable Type | View | CED(22) | Civil Engineering Department | 1 |
| 117 | CED 0122 | Study for the Design, Construction, and Performance Requirements of Nitrogen Injection Fire Prevention and Extinguishing System (NIFPES) for Oil-Filled Transformers | View | CED(22) | Civil Engineering Department | 2 |
| 118 | CED 0121 | Study of the different types and grades and performance parameters of rubber floor tiles and sheets manufactured and/or available in Indian market. | View | CED(5) | Civil Engineering Department | 3 |
| 119 | CED 0120 | Study of the different types/varieties and performance parameters of flexible polyvinyl chloride (PVC) floorings manufactured and/or available in Indian market. | View | CED(5) | Civil Engineering Department | 3 |
| 120 | CED 0118 | Literature review, market and industry survey, and performance assessment of different type of sliding door bolts for doors and windows (a builder’s hardware) manufactured and/or available in Indian market. | View | CED(15) | Civil Engineering Department | 1 |
| 121 | CED 0117 | Study of the technological advancements in the manufacture and market trends in the utilization of lime-based blocks used as building material. | View | CED(4) | Civil Engineering Department | 6 |
| 122 | CED 0116 | Study of the technological advancements in the manufacture and market trends in the utilization of calcium silicate bricks used as building material. | View | CED(4) | Civil Engineering Department | 8 |
| 123 | CED 0113 | Study on the Design, Construction, and Performance Requirements of Gravity Fire Sprinkler System for Old Buildings/Buildings in Congested Areas | View | CED(22) | Civil Engineering Department | 2 |
| 124 | CED 0112 | Literature review, market and industry survey, and performance assessment of different type of door closers (a builder’s hardware) manufactured and/or available in Indian market. | View | CED(15) | Civil Engineering Department | 4 |
| 125 | CED 0111 | Literature review, market and industry survey, and performance assessment of different type of hinges used in doors and windows (a builder’s hardware) manufactured and/or available in Indian market. | View | CED(15) | Civil Engineering Department | 3 |
| 126 | LITD 0110 | Use case compilation for Smart manufacturing in India. | View | LITD(34) | Electronics and Information Technology Department | 3 |
| 127 | ETD 0108 | Collection and analysis of Dissolved Gas Analysis (DGA) Data for Ester based Transformer fluids and conclude method for interpretation of DGA for fault identifications of ester fluid filled transformers. | View | ETD(3) | Electrotechnical Department | 3 |
| 128 | PGD 0107 | Calibration of horizontal and tilted oil storage tanks in India | View | PGD(26) | Production and General Engineering Department | 2 |
| 129 | PGD 0106 | Calibration of vertical oil storage tanks in India. | View | PGD(26) | Production and General Engineering Department | 1 |
| 130 | PGD 0105 | Technological gap analysis for Commercial scales (Non-flexible length measures). | View | PGD(26) | Production and General Engineering Department | 1 |
| 131 | PGD 0104 | Technological gap analysis for Steel tapes used in measurement. | View | PGD(26) | Production and General Engineering Department | 2 |
| 132 | PGD 0103 | Technological gap analysis for woven metallic and glass fibre measuring tapes. | View | PGD(26) | Production and General Engineering Department | 1 |
| 133 | PGD 0102 | Impurities in domestic supply of compressed biogas blended PNG in India and their effects on metrological performance of gas meters | View | PGD(26) | Production and General Engineering Department | 1 |
| 134 | PGD 0099 | Study of effects of gas flow oscillations on the performance of domestic gas meters. | View | PGD(26) | Production and General Engineering Department | 1 |
| 135 | ETD 0098 | Study of Safety and Performance parameters of electric fans and regulators for use in ships | View | ETD(32) | Electrotechnical Department | 7 |
| 136 | ETD 0096 | Study of Safety and Performance parameters of mains operated electric shavers | View | ETD(32) | Electrotechnical Department | 2 |
| 137 | PCD 0094 | Study of Toxicological effect of colourants and pigments in plastics feeding bottle on infant health. | View | PCD(21) | Petroleum, Coal and Related Products Department | 1 |
| 138 | PCD 0093 | Study of material properties of Silicone for use in Silicone gadgets for kitchen. | View | PCD(13) | Petroleum, Coal and Related Products Department | 2 |
| 139 | PCD 0092 | Development of procedure for Determination of Polycyclic Aromatic Hydrocarbons (PAHs) — Gas Chromatography With Mass Spectrometric Detection (GC-MS) Method. | View | PCD(29) | Petroleum, Coal and Related Products Department | 5 |
| 140 | ETD 0088 | Study of Lightning accidents and Early warning systems in India to assess Lightning Safety Measures. | View | ETD(20) | Electrotechnical Department | 9 |
| 141 | ETD 0087 | Study of Fire initiation and spread due to defects in electrical installations. | View | ETD(20) | Electrotechnical Department | 1 |
| 142 | ETD 0086 | Study of Chemical/ Maintenance Free Earthing System used in India. | View | ETD(20) | Electrotechnical Department | 1 |
| 143 | LITD 0084 | Use-case testing for Cloud interoperability and portability | View | LITD(31) | Electronics and Information Technology Department | 5 |
| 144 | TXD 0083 | Study of constructional and performance requirements for handmade wool blended carpet used in floor covering applications and packaging practices of carpets. | View | TXD(4) | Textiles Department | 1 |
| 145 | CHD 0078 | Study the assessment and usage of polyelectrolyte in water and wastewater. | View | CHD(36) | Chemical Department | 5 |
| 146 | ETD 0077 | Comprehensive study on ‘Intelligent & Connected LED Lighting Systems’ | View | ETD(49) | Electrotechnical Department | 9 |
| 147 | ETD 0076 | Comprehensive Study of advanced road traffic signal systems in India | View | ETD(49) | Electrotechnical Department | 4 |
| 148 | ETD 0075 | Comprehensive study of interconnection and interoperability of Distributed Energy Resources with associated Electric Power Systems (EPSs) interfaces | View | ETD(46) | Electrotechnical Department | 8 |
| 149 | PCD 0073 | To provide inputs for development of test method for determination of wide-range FAME (C8 & above) as total FAME content in Aviation Turbine Fuels containing synthesized hydrocarbons using High Performance Liquid Chromatography (HPLC) | View | PCD(1) | Petroleum, Coal and Related Products Department | 2 |
| 150 | SSD 0072 | Study on cruise tourism operations and service parameters to establish guidelines and requirements for cruise service providers | View | SSD(2) | Service Sector Department | 3 |
| 151 | SSD 0071 | Study of the warehouse operations and services parameters to frame guidelines and requirements for Non-Agri warehousing service providers | View | SSD(18) | Service Sector Department | 4 |
| 152 | SSD 0070 | Study of the warehouse operations and services parameters to frame guidelines and requirements for agriculture produce warehousing service providers | View | SSD(18) | Service Sector Department | 3 |
| 153 | SSD 0069 | Study of requirements for street and public facility cleaning services | View | SSD(7) | Service Sector Department | 4 |
| 154 | SSD 0068 | Study of specific, operational and safety requirements applicable to Professional Sports Academies | View | SSD(5) | Service Sector Department | 3 |
| 155 | SSD 0067 | An empirical study of medical tourists visiting India for understanding their demographics, preferences, and experiences | View | SSD(16) | Service Sector Department | 8 |
| 156 | TXD 0066 | — Development and validation of test method for determination of Polycyclic Aromatic Hydrocarbons (PAHs) in textiles and textile product | View | TXD(5) | Textiles Department | 3 |
| 157 | TXD 0065 | Development and validation of test method for determination of Chlorinated Organic Carriers in textiles and textile products | View | TXD(5) | Textiles Department | 2 |
| 158 | LITD 0064 | Study of performance and safety parameters of Wearable Compression E-Textile Products used for massaging applications | View | LITD(33) | Electronics and Information Technology Department | 3 |
| 159 | FAD 0063 | Study on Shelf-life assessment of shell eggs. | View | FAD(18) | Food and Agriculture Department | 4 |
| 160 | FAD 0062 | Study on Structural Stability and Design Specifications of Greenhouse Structures for different wind zones of India | View | FAD(22) | Food and Agriculture Department | 2 |
| 161 | FAD 0061 | Study on requirements and operational aspects of small-scale slaughterhouses for hygienic meat production | View | FAD(18) | Food and Agriculture Department | 3 |
| 162 | FAD 0060 | Study on Standardization and Validation of Farm-to-Fork Traceability System in Meat Sector | View | FAD(18) | Food and Agriculture Department | 3 |
| 163 | ETD 0059 | Study of Safety and Performance parameters of Electrical timer relays for industrial purposes - Pneumatic, Motorised and Electronic | View | ETD(35) | Electrotechnical Department | 1 |
| 164 | LITD 0057 | Airborne LiDAR data quality assessment | View | LITD(22) | Electronics and Information Technology Department | 6 |
| 165 | PCD 0056 | Development of test method for determination of triglyceride (vegetable oils and used cooking oils (UCO)) in diesel and diesel-biodiesel blends using High Performance Liquid Chromatography (HPLC) | View | PCD(1) | Petroleum, Coal and Related Products Department | 5 |
| 166 | ETD 0053 | Study of the technological advancement in the thermocouple pyrometers and different types of pyrometers used in the industry | View | ETD(18) | Electrotechnical Department | 3 |
| 167 | ETD 0051 | Study of performance and constructional requirements of covered conductor for voltage rating upto 110KV | View | ETD(9) | Electrotechnical Department | 1 |
| 168 | ETD 0050 | Study of Surge arresters installed in electricity distribution applications and comparison with clause 5.2.5.5.2 of IS 15086: Part 5 : 2020 Surge Arresters Part 5 Selection and Application Recommendations | View | ETD(30) | Electrotechnical Department | 4 |
| 169 | ETD 0048 | Study of Safety and Performance parameters of Electric coffee makers | View | ETD(32) | Electrotechnical Department | 1 |
| 170 | CHD 0046 | Study on performance characteristics of various types of Thermal Paper | View | CHD(15) | Chemical Department | 2 |
| 171 | CHD 0045 | Study on safety practices followed in hexane industry. | View | CHD(7) | Chemical Department | 1 |
| 172 | CHD 0044 | Study of Properties for Environment-Friendly Printing Inks for Food Packaging | View | CHD(14) | Chemical Department | 2 |
| 173 | CHD 0043 | To study the safety and performance parameters of Fluororesin coatings | View | CHD(20) | Chemical Department | 3 |
| 174 | CHD 0042 | To study the safety and performance parameters of Polysiloxane coatings | View | CHD(20) | Chemical Department | 4 |
| 175 | CHD 0039 | Study on Evaluating the Efficacy of Small Incinerators/Thermal Processors for Incineration of Sanitary Napkins | View | CHD(33) | Chemical Department | 5 |
| 176 | CHD 0038 | Study of properties/specifications and the test methods for Refrigerant Gases | View | CHD(6) | Chemical Department | 1 |
| 177 | TXD 0037 | Study of quality, performance and constructional parameters of ‘Headliners for Automobiles’. | View | TXD(38) | Textiles Department | 1 |
| 178 | TXD 0035 | Study of safety, performance and constructional requirement for surgical sutures (absorbable and non-absorbable) | View | TXD(36) | Textiles Department | 3 |
| 179 | TED 0034 | Study of Cutter Suction Dredge Components | View | TED(18) | Transport Engineering Department | 1 |
| 180 | TED 0033 | Study of thermal and acoustic insulation materials for use on-board ships | View | TED(17) | Transport Engineering Department | 1 |
| 181 | TXD 0031 | A comprehensive study of the constructional and performance requirements of scaffolding nets used in construction activities for high rise buildings/structures. | View | TXD(34) | Textiles Department | 2 |
| 182 | LITD 0030 | Study of Impacts of Artificial Intelligence on Human Psychology | View | LITD(30) | Electronics and Information Technology Department | 13 |
| 183 | MTD 0029 | Study for identification and validation of test method for analysis of Tungsten Concentrate ,Scheelite(CaWO4) and Wolframite [(Fe,Mn)WO4 | View | MTD(34) | Metallurgical Engineering Department | 1 |
| 184 | MTD 0028 | Study of chemical, physical and mechanical properties of stainless steel pipe and tubes made of low nickel stainless steel grades | View | MTD(19) | Metallurgical Engineering Department | 5 |
| 185 | MTD 0027 | Study of Construction, safety requirements and types of Crane- Suspended ladles for iron and steel foundries | View | MTD(14) | Metallurgical Engineering Department | 1 |
| 186 | LITD 0026 | Study for Management of Mobile Applications’ Permissions | View | LITD(17) | Electronics and Information Technology Department | 6 |
| 187 | MTD 0025 | Study of chemical and mechanical properties of grades of aluminium alloys used in manufacturing Internal Combustion Engine Pistons | View | MTD(7) | Metallurgical Engineering Department | 7 |
| 188 | LITD 0024 | Study of Data Centre infrastructure in India | View | LITD(31) | Electronics and Information Technology Department | 10 |
| 189 | LITD 0023 | Study of Reference architecture for Smart Manufacturing in India | View | LITD(34) | Electronics and Information Technology Department | 2 |
| 190 | TED 0019 | Preparation of Test Method for Vertical Fatigue Testing of Suspension Fork for Bicycles | View | TED(16) | Transport Engineering Department | 4 |
| 191 | FAD 0018 | Development of smart sensor probe-based method for rapid detection of freshness of dressed chicken | View | FAD(18) | Food and Agriculture Department | 3 |
| 192 | TED 0017 | Requirements of Bottom Bracket (BB) Cartridge | View | TED(16) | Transport Engineering Department | 1 |
| 193 | FAD 0015 | Study of Neutral Spirits for Alcoholic Drinks for their Quality and Safety Parameters | View | FAD(29) | Food and Agriculture Department | 2 |
| 194 | FAD 0011 | Development of test method for determination of chicory content in coffee-chicory powder | View | FAD(6) | Food and Agriculture Department | 6 |
| 195 | FAD 0009 | Validation of method of test for detection of Buffalo DNA in foodstuff and feedstuffs by real-time PCR | View | FAD(23) | Food and Agriculture Department | 3 |
| 196 | FAD 0008 | Development of lateral flow immunoassay integrated smartphone device-based test method for in-situ meat authentication | View | FAD(18) | Food and Agriculture Department | 3 |
| 197 | FAD 0007 | Development of protein biomarker-based test method for authentication of cold-slaughtered chicken in fresh and cooked meat | View | FAD(18) | Food and Agriculture Department | 2 |
| 198 | PCD 0006 | To study the performance requirement of ageing resistance test in PP feeding bottle | View | PCD(21) | Petroleum, Coal and Related Products Department | 3 |
| 199 | LITD 0004 | Study of performance and safety parameters of Wearable E-Textile for Heating Application | View | LITD(33) | Electronics and Information Technology Department | 6 |