Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Transmission, conveyer and elevator Belting )
Total Standards : 157
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10022 : 1981 |
Specification for open ended cogged V - Belting | 0 | Feb, 2021 | Download | |
| 2 | IS 10213 : 1982 |
Specification for sandwich belting | 0 | Mar, 2018 | Download | |
| 3 | IS 10229 : 1982 |
Specification for open end V - Belts | 0 | Mar, 2018 | Download | |
| 4 | IS 10288 : 1982 |
Specification for belt - Fasteners, plate type | 1 | Mar, 2018 | Download | |
| 5 | IS 10686 : 1983 |
Specification for mechanical multi - Disc clutches (Wet Type) | 0 | Mar, 2018 | Download | |
| 6 | IS 11038 : 1984 |
Specification for endless hexagonal belts for agricultural machinery and groove section of corresponding pulley | 0 | Feb, 2021 | Download | |
| 7 | IS 1120 : 1975 (1 Revision) |
Specification for coach screws (First Revision) | 0 | Feb, 2021 | Download | |
| 8 | IS 11507 : 2015/ISO 5294 (2 Revision) |
Synchronous belt drives - Pulleys (Second Revision) | 0 | Jan, 2020 | Buy | |
| 9 | IS 11842 : 1986 |
Specification for pvc/plastic hygienic belting | 1 | Feb, 2021 | Download | |
| 10 | IS 12091 : 1987 |
Specification for belt fasteners, hook type | 0 | Mar, 2018 | Download | |
| 11 | IS 12854 : 1989 |
Power Transmission - Belts, endless flat (Used in lenix drive systems specification) | 0 | Feb, 2021 | Download | |
| 12 | IS 1364 : Part 5 : 2002/ISO 4036:1999 (4 Revision) |
Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision) | 0 | Apr, 2023 | Buy | |
| 13 | IS 1367 : Part 1 : 2014/ISO 8992 : 2005 (4 Revision) |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) | 0 | Apr, 2024 | Buy | |
| 14 | IS 1367 : Part 2 : 2002/ISO 4759-1:2000 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision) | 0 | Apr, 2023 | Buy | |
| 15 | IS 1367 : Part 7 : 1980 (2 Revision) |
Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision) | 1 | Apr, 2023 | Buy | |
| 16 | IS 1367 : Part 9 : Sec 1 : 1993/ISO 6157-1 :1988 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 1 bolts, screws and studs for general applications (Third Revision) | 1 | Apr, 2024 | Buy | |
| 17 | IS 1367 : Part 9 : Sec 2 : 1993/ISO 6167-3 : 1988 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 2 bolts, screws and studs for special applications (Third Revision) | 1 | Apr, 2024 | Buy | |
| 18 | IS 1367 : Part 10 : 2002/ISO 6157-2:1995 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision) | 0 | Apr, 2023 | Buy | |
| 19 | IS 1367 : Part 12 : 1981 (2 Revision) |
Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision) | 0 | Apr, 2024 | Buy | |
| 20 | IS 1367 : Part 16 : 2002/ISO 8991:1986 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 16 designation system for fasteners (Third Revision) | 0 | Apr, 2023 | Buy | |
| 21 | IS 1367 : Part 18 : 1996 (3 Revision) |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision) | 0 | Feb, 2021 | Download | |
| 22 | IS 1367 : Part 19 : 1997/ISO 3800 : 1993 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs | 0 | Apr, 2024 | Buy | |
| 23 | IS 1367 : Part 20 : 1996/ISO 896-7 : 1992 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions - Mechanical properties: Part 20 torsional - Test and mlnimum torques for bolts and screws with nominal diameters 1 mm to 10 mm | 0 | Feb, 2021 | Buy | |
| 24 | IS 1369 : Part 1 : 1993/IS0 3508 : 1976 (3 Revision) |
Fasteners - Thread run - Outs and under - cuts: Part 1 dimensions for screw thread run - Outs for external ISO metric threads (Third Revision) | 0 | Apr, 2024 | Buy | |
| 25 | IS 1369 : Part 2 : 1993/ISO 4755 : 1983 (3 Revision) |
Fasteners - Thread run - Outs and undercuts: Part 2 dimensions for screw thread undercuts for external ISO metric threads (Third Revision ; | 0 | Apr, 2024 | Buy | |
| 26 | IS 1370 : 1993 (3 Revision) |
Transmission belting - Friction surface rubber belting specification (Third Revision) | 0 | Mar, 2018 | Download | |
| 27 | IS 13775 : Part 1 : 1993 |
Conveyor belting - Solid woven cotton/synthetic impregnated and unimpregnated - Specification: Part 1 aeroslide belting for air gravity conveyor | 1 | Apr, 2021 | Download | |
| 28 | IS 14206 : Part 1 : 1995 |
On - Sitenon - Mechanical jointing of plied textile reinforced rubber conveyor belting - Code of practice: Part 1 hot vulcanizing | 0 | Mar, 2018 | Download | |
| 29 | IS 14206 : Part 2 : 2001 |
On - Site non - Mechanical jointing of plied textile reinforced rubber conveyor belting - Code of practice: Part 2 cold vulcanizing | 0 | Mar, 2021 | Download | |
| 30 | IS 14261 : 1995 |
Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification | 0 | Feb, 2021 | Download | |
| 31 | IS 15143 : 2002 |
Conveyor belting of elastomeric and steel cord construction for underground mines and such other hazardous applications - Specification | 0 | Mar, 2018 | Download | |
| 32 | IS 15149 : 2002/ISO 9981 |
Belt drives - Pulleys and V - Ribbed belts for the automotive industry - Pk profile : dimensions | 0 | Mar, 2018 | Buy | |
| 33 | IS 15151 : 2002/ISO 9982 |
Belt drives - Pulleys and V - Ribbed belts for industrial applications - PH, PJ, PK, PL and PM profiles : dimensions | 0 | Mar, 2018 | Buy | |
| 34 | IS 15427 : 2004/ISO 15143 |
Conveyor belting of elastomeric and steel cord construction for general material handling - Specification | 0 | Apr, 2021 | Buy | |
| 35 | IS 15427 : Part 4 : 2015/ISO 15143 |
Steel cord conveyor belts: Part 4 vulcanized belt joints (First Revision) | 0 | Jan, 2020 | Buy | |
| 36 | IS 15509 : 2017/ISO 1275 : 2006 (1 Revision) |
Double - Pitch precision roller chains - Attachments and associated chain sprockets for transmission and conveyors (First Revision) | 0 | Mar, 2022 | Buy | |
| 37 | IS 15658 : 2021/ISO 283 :2015 (1 Revision) |
Concrete Paving Blocks - Specification ( First Revision ) | 1 | ---- | Buy | |
| 38 | IS 16365 : 2015/ISO 21182 |
Light conveyor belts - Determination of the coefficient of friction | 0 | Jan, 2020 | Buy | |
| 39 | IS 16370 : 2015/ISO 8419:2003 |
Belt drives - Narrow V - Belts - Sections 9n/j, 15n/j and 25n/j (Lengths In The Effective System) | 0 | Jan, 2020 | Buy | |
| 40 | IS 16376 : 2017/ISO 9010 : 1997 |
Synchronous belt drives - Automotive belts | 0 | ---- | Buy | |
| 41 | IS 16377 : 2017/ISO 9011:2007 |
Synchronous belt drives - Automotive pulleys | 0 | ---- | Buy | |
| 42 | IS 16378 : 2017/ISO 9563:1990 |
Belt drives - Electrical conductivity of antistatic endless synchronous belts - Characteristics and test method | 0 | ---- | Buy | |
| 43 | IS 16379 : 2017/ISO 9608:1994 |
V - Belts - Uniformity of belts - Test method for determination of centre distance variation | 0 | ---- | Buy | |
| 44 | IS 16381 : 2017/ISO 21178:2013 |
Light conveyor belts - Determination of electrical resistances | 0 | Mar, 2022 | Buy | |
| 45 | IS 16382 : 2017/ISO 21179 : 2013 |
Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt | 0 | Mar, 2022 | Buy | |
| 46 | IS 16383 : 2017/ISO 21180 : 2013 |
Light conveyor belts - Determination of the maximum tensile strength | 0 | Mar, 2022 | Buy | |
| 47 | IS 16384 : 2017/ISO 21181 : 2013 |
Light conveyor belts - Determination of the relaxed elastic modulus | 0 | Mar, 2022 | Buy | |
| 48 | IS 16385 : Part 1 : 2017/ISO 21183-1 : 2005 |
Light conveyor belts: Part 1 principal characteristics and applications | 0 | Mar, 2022 | Buy | |
| 49 | IS 16387 : 2017/ISO 24035 : 2014 |
Belt drives - V - Belts and the corresponding pulleys for agricultural machineries - Dimensions | 0 | ---- | Buy | |
| 50 | IS 16558 : 2017/ISO 2790:2004 |
Belt drives - V - Belts for the automotive industry and corresponding pulleys - Dimensions | 0 | ---- | Buy | |
| 51 | IS 16755 : 2018/ISO 16851:2012 |
Textiles conveyor belts - Determination of the net length of an endless (Spliced) conveyor belt | 0 | ---- | Buy | |
| 52 | IS 16756 : 2018/ISO 10247 : 1990 |
Conveyor Belts - Characteristics of Covers - Classification | 0 | Aug, 2023 | Buy | |
| 53 | IS 16758 : 2018/ISO 3684 |
Conveyor belts - Determination of minimum pulley diameter | 0 | ---- | Buy | |
| 54 | IS 16765 : 2019/ISO 14890-2013 |
Conveyor belts - Specification for rubber - Or plastics - Covered conveyor belts of textile construction for general use | 0 | ---- | Buy | |
| 55 | IS 1691 : 1980 (2 Revision) |
Specification for cast iron and mild steel flat pulleys (Second Revision) | 0 | Mar, 2018 | Download | |
| 56 | IS 17056 : 2019/ISO 282 : 1992 |
Conveyor Belts — Sampling | 0 | ---- | Buy | |
| 57 | IS 17071 : 2019/ISO 252 |
Conveyor Belts — Adhesion Between Constitutive Elements — Test Methods | 0 | ---- | Buy | |
| 58 | IS 17089 : 2019/ISO 433 : 2017 |
Conveyor Belts — Markings | 0 | ---- | Buy | |
| 59 | IS 17114 : 2019/ISO 251 |
Conveyor belts with textile carcass - Widths and lengths | 0 | ---- | Buy | |
| 60 | IS 1821 : 1987/ISO 273-1979 (3 Revision) |
Dimensions for clearance holes for bolts and screws (Third Revision) | 0 | Apr, 2024 | Buy | |
| 61 | IS 1862 : 1975 (2 Revision) |
Specification for studs (Second Revision) | 1 | Feb, 2021 | Download | |
| 62 | IS 1891 : Part 2 : 1993 (3 Revision) |
Conveyor and elevator textile belting - Specificaton: Part 2 heat resistant belting (Third Revision) | 3 | Mar, 2018 | Download | |
| 63 | IS 1891 : Part 3 : 1988 (2 Revision) |
Specification for rubber conveyor and elevator textile belting: Part 3 oil resistant belting (Second Revision) | 3 | Mar, 2018 | Download | |
| 64 | IS 1891 : Part 4 : 1978 (1 Revision) |
Specification for rubber conveyor and elevator belting: Part 4 hygienic belting (First Revision) | 2 | Mar, 2018 | Download | |
| 65 | IS 1891 : Part 5 : 1993 |
Conveyor and elevator textile belting - Specification: Part 5 fire resistant belting for surface application | 1 | Mar, 2018 | Download | |
| 66 | IS 1928 : 1961 |
Specification for boiler rivets (12 To 48 Mm Diameter) | 0 | Feb, 2021 | Download | |
| 67 | IS 1929 : 1982 (1 Revision) |
Specification for hot forged steel rivets for hot closing (12 To 36 Mm Diameter) | 4 | Feb, 2021 | Download | |
| 68 | IS 2016 : 1967 (1 Revision) |
Specification for plain washers (First Revision) | 4 | Feb, 2021 | Download | |
| 69 | IS 2122 : Part 1 : 1973 (1 Revision) |
Code of practice for selection, storage, installation and maintenance of belting for power transmission: Part 1 flat belt drives (First Revision) | 1 | Mar, 2018 | Download | |
| 70 | IS 2122 : Part 2 : 1991 (1 Revision) |
Power transmission - Belts - Code of practice for selection, storage, installation and maintenance of belting for power transmission: Part 2 V - Belt drives (First Revision) | 0 | Mar, 2018 | Download | |
| 71 | IS 2155 : 1982 (1 Revision) |
Specification for cold forged solid steel rivets for hot closing (6 To 16 Mm Diameter) (First Revision) | 1 | Feb, 2021 | Download | |
| 72 | IS 2232 : 1967 (1 Revision) |
Specification for slotted and castle nuts (First Revision) | 3 | Feb, 2021 | Download | |
| 73 | IS 2241 : 1976 (1 Revision) |
Specification for round leather belting for small machines (First Revision) | 0 | Mar, 2018 | Download | |
| 74 | IS 2269 : 2006/ISO 4762:2004 (5 Revision) |
Hexagon socket head cap screws (Fifth Revision) | 0 | Feb, 2021 | Buy | |
| 75 | IS 2292 : 1974 (1 Revision) |
Specification for taper keys and keyways (First Revision) | 0 | Mar, 2018 | Download | |
| 76 | IS 2293 : 1974 (1 Revision) |
Specification for gib - Head - Keys and keyways (First Revision) | 0 | Mar, 2018 | Download | |
| 77 | IS 2294 : 1986 (2 Revision) |
Specifi - Cation for woodruff keys and keyways (Second Revision) | 2 | Mar, 2018 | Download | |
| 78 | IS 2393 : 2010/ISO 2338 : 1997 (5 Revision) |
Parallel pins, of unhardened steel and austenitic stainless steel (Third Revision) | 0 | Feb, 2021 | Buy | |
| 79 | IS 2494 : Part 1 : 1994 (2 Revision) |
V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision) | 1 | Jan, 2020 | Download | |
| 80 | IS 2494 : Part 2 : 1993 (2 Revision) |
V - Belts - Endless V - Belts for industrial purposes: Part 2 fire resistant and antistatic V - Belts - Specification | 3 | Jan, 2020 | Download | |
| 81 | IS 2585 : 2006 (1 Revision) |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 82 | IS 2636 : 1972 (1 Revision) |
Specification for wing nuts (First Revision) | 0 | Feb, 2021 | Download | |
| 83 | IS 2638 : 1974 (1 Revision) |
Specification for flat split cotters (First Revision) | 0 | Feb, 2021 | Download | |
| 84 | IS 2687 : 1991 (2 Revision) |
Capnuts - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 85 | IS 2907 : 1998 (1 Revision) |
Non - Ferrous rivets - Specification (First Revision) | 0 | Dec, 2019 | Download | |
| 86 | IS 2998 : 1982 (1 Revision) |
Specification for cold forged steel rivets for cold closing (1 To 16 mm Diameter) (First Revision) | 3 | Dec, 2019 | Download | |
| 87 | IS 3063 : 1994 (2 Revision) |
Fasteners - Single coil rectangular section spring lock washers specification (Second Revision) | 1 | Feb, 2021 | Download | |
| 88 | IS 3181 : 1992 (2 Revision) |
Conveyor belts - Fire resistant conveyor belting for underground mines and such other hazardous applications - Specification (Second Revision) | 1 | Mar, 2018 | Download | |
| 89 | IS 3460 : 1991 (2 Revision) |
Knurled nuts - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 90 | IS 3468 : 1991 (2 Revision) |
Pipe nuts - Specification (Second Revision) | 1 | Feb, 2021 | Download | |
| 91 | IS 3524 : Part 1 : 1982 (1 Revision) |
Specification for threaded taper pins: Part 1 with internal threads (First Revision) | 0 | Feb, 2021 | Download | |
| 92 | IS 3524 : Part 2 : 1982 (1 Revision) |
Specification for threaded taper pins: Part 2 with external threads (First Revision) | 0 | Feb, 2021 | Download | |
| 93 | IS 3640 : 1982 (1 Revision) |
Specification for hexagon fit bolts (First Revision) | 1 | Feb, 2021 | Download | |
| 94 | IS 3688 : 1990/ISO 775 (2 Revision) |
Power transmission - Shafts - Dimensions for cylindrical and 1/10 conical shaft ends (Second Revision) | 0 | Mar, 2018 | Buy | |
| 95 | IS 3726 : 2003 (2 Revision) |
Thumb screws - Specification (Second Revision) | 0 | Dec, 2019 | Download | |
| 96 | IS 3727 : 1966 |
Specification for wing screws | 0 | Feb, 2021 | Download | |
| 97 | IS 3757 : 1985 (2 Revision) |
Specification for high strength structural bolts (Second Revision) | 2 | Dec, 2019 | Download | |
| 98 | IS 3974 : 1967 |
Specification for bifurcated rivets for general purposes | 0 | Feb, 2021 | Download | |
| 99 | IS 4040 : 1998 (1 Revision) |
Fasteners - Solid drilled tubular and semi - Tubular rivets - Specification (First Revision) | 2 | Dec, 2019 | Download | |
| 100 | IS 4172 : 2005/ISO 885:2000 (1 Revision) |
General purpose bolts and screws - Metric series - Radii under the head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 101 | IS 4278 : 1988 (2 Revision) |
Specification for flexible shafts for speedometers and tachographs (Second Revision) | 1 | Jan, 2020 | Download | |
| 102 | IS 4499 : 1968 |
Dimensions for depth of holes for studs | 1 | Feb, 2021 | Download | |
| 103 | IS 4732 : 1968 |
Specification for rivets for shipbuilding | 0 | Feb, 2021 | Download | |
| 104 | IS 4762 : 2002 (1 Revision) |
FASTENERS — WORM DRIVE HOSE CLAMPS FOR GENERAL PURPOSES — SPECIFICATION ( Second Revision ) | 4 | Feb, 2021 | Download | |
| 105 | IS 530 : 1976 (2 Revision) |
Specification for solid - Woven impregnated hair belting for power transmission (Second Revision) | 0 | Mar, 2018 | Download | |
| 106 | IS 5368 : 1969 |
Specification for thin slotted and castle nuts (Dia Range 6 To 52 Mm) | 1 | Feb, 2021 | Download | |
| 107 | IS 5370 : 1969 |
Specification for plain washers with outside diameter 3 x inside diameter | 1 | Feb, 2021 | Download | |
| 108 | IS 5371 : 1982 (1 Revision) |
Specification for multi - Tooth lock washers (First Revision) | 0 | Feb, 2021 | Download | |
| 109 | IS 5372 : 1975 (1 Revision) |
Specification for taper washers for channels (ISMC) (First Revision) | 0 | Feb, 2021 | Download | |
| 110 | IS 5373 : 1969 |
Specification for square washers for wood fastenings | 1 | Feb, 2021 | Download | |
| 111 | IS 5374 : 1975 (1 Revision) |
Specification for taper washers for I - Beams (Ismb) (First Revision) | 0 | Feb, 2021 | Download | |
| 112 | IS 5554 : 1991 (1 Revision) |
Lock washers with lug - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 113 | IS 5556 : 1991 (1 Revision) |
Serratedlockwashers - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 114 | IS 5593 : 1980 (1 Revision) |
Specification for belt fasteners (Alligator Type) (First Revision) | 3 | Feb, 2021 | Download | |
| 115 | IS 5635 : 1983 (1 Revision) |
Specification for automotive V - Belt drives (First Revision) | 1 | Feb, 2021 | Download | |
| 116 | IS 5957 : 2003/ISO 1478:1999 (2 Revision) |
Screw threads for thread forming tapping screws dimensions (Second Revision) | 0 | Apr, 2023 | Buy | |
| 117 | IS 6094 : Part 1 : 2006/ISO 4026:2003 (3 Revision) |
Hexagon socket set screws: Part 1 with flat point (Third Revision) | 0 | Apr, 2024 | Buy | |
| 118 | IS 6094 : Part 2 : 2006/ISO 4027:2003 |
Hexagon socket set screws: Part 2 with cone point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 119 | IS 6094 : Part 3 : 2006/ISO 4028:2003 |
Hexagon socket set screws: Part 3 with dog point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 120 | IS 6094 : Part 4 : 2006/ISO 4029:2003 (3 Revision) |
Hexagon socket set screws: Part 4 with cup point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 121 | IS 6113 : 1970 |
Specification for aluminium fasteners for buildin - g purposes | 0 | Feb, 2021 | Download | |
| 122 | IS 6167 : 1971 |
Specification for thin parallel keys and keyways | 1 | Mar, 2018 | Download | |
| 123 | IS 6276 : 1971 |
Specification for flexible shafts used in concrete vibrators | 0 | Mar, 2018 | Download | |
| 124 | IS 6580 : 1972 |
Specification for train lighting belt fasteners | 1 | Mar, 2018 | Download | |
| 125 | IS 6610 : 1972 |
Specification for heavy washers for steel structures | 0 | Feb, 2021 | Download | |
| 126 | IS 6623 : 2004 (2 Revision) |
High Strength Structural Nuts | 1 | Feb, 2021 | Download | |
| 127 | IS 6639 : 1972 |
Specification for hexagon bolts for steel structures | 5 | Feb, 2021 | Download | |
| 128 | IS 6649 : 1985 (1 Revision) |
Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision) | 1 | Feb, 2021 | Download | |
| 129 | IS 6687 : 2002 (1 Revision) |
Code of practice for selection, storage, installation and maintenance of conveyor belting (First Revision) | 0 | Mar, 2018 | Download | |
| 130 | IS 6688 : 2005/ISO 2339:1986 (1 Revision) |
Taper pins, unhardened (Second Revision) | 0 | Feb, 2021 | Buy | |
| 131 | IS 6689 : 2003/ISO 8734:1997 (1 Revision) |
Parallel pins of hardened steel and martensitic stainless steel (Dowel Pins) (First Revision) | 0 | Apr, 2024 | Buy | |
| 132 | IS 6730 : 1972 |
Specification for felt nails | 0 | Feb, 2021 | Download | |
| 133 | IS 6733 : 1972 |
Specification for wall and roofing nails | 1 | Feb, 2021 | Download | |
| 134 | IS 6734 : 1972 |
Specification for cut lath and lath nails | 0 | Feb, 2021 | Download | |
| 135 | IS 6735 : 1994 (1 Revision) |
Fasteners - Spring lock wasixers for screws with cylindrical heads - Specification (First Revision) | 1 | Dec, 2019 | Download | |
| 136 | IS 6736 : 1972 |
Specification for slotted raised countersunk head wood screws | 2 | Feb, 2021 | Download | |
| 137 | IS 6738 : 1972 |
Specification for panel pins and lost head nails | 1 | Feb, 2021 | Download | |
| 138 | IS 6739 : 1972 |
Slotted Round Head Wood Screws | 2 | Feb, 2021 | Download | |
| 139 | IS 6755 : 1980 (1 Revision) |
Specification for double coil helical spring washers (First Revision) | 0 | Feb, 2021 | Download | |
| 140 | IS 6760 : 1972 |
Specification for slotted countersunk head wood screws | 2 | Feb, 2021 | Download | |
| 141 | IS 6821 : 1973 |
Methods for sampllNg non - Threaded fasteners | 2 | Feb, 2021 | Download | |
| 142 | IS 6862 : 2005/ISO 2340 : 1986 (2 Revision) |
Clews pins without head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 143 | IS 6863 : 2005/ISO 2341:1986 (2 Revision) |
Clevis pins with head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 144 | IS 725 : 1961 |
Specification for copper wire nails (Revised) | 0 | Feb, 2021 | Download | |
| 145 | IS 7368 : 2005/ISO 8744:1997 (2 Revision) |
Grooved pins - Full - Length taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 146 | IS 7383 : 2005/ISO 8742:1997 (2 Revision) |
Grooved puns - One - Third - Length centre grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 147 | IS 7384 : 2005/ISO 8739:1997 (2 Revision) |
Grooved pins - Full - Length parallel grooved, with pilot (Second Revision) | 0 | Feb, 2021 | Buy | |
| 148 | IS 7385 : 2005/ISO 8745:1997 (2 Revision) |
Grooved pins - Half - Length taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 149 | IS 7386 : 2005/ISO 8741:1997 (2 Revision) |
Grooved pins - Half - Length reverse taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 150 | IS 7478 : 2011/ISO 4757 : 1983 (2 Revision) |
Cross recesses for screws (Second Revision) | 0 | Feb, 2021 | Buy | |
| 151 | IS 7923 : 1985 (1 Revision) |
Glossary of terms and definitions relating to drives using V - Belts and grooved pulleys (First Revision) | 0 | Feb, 2021 | Download | |
| 152 | IS 866 : 1957 |
Specification forTinmens Rivets | 0 | Feb, 2021 | Download | |
| 153 | IS 8777 : 2008/ISO 3410 (1 Revision) |
Agricultural machinery - Endless variable - Speed V - Belts and groove sections of corresponding pulleys (First Revision) | 0 | Feb, 2021 | Buy | |
| 154 | IS 9515 : 1980 |
Specification for link V - Belts | 0 | Feb, 2021 | Download | |
| 155 | IS 9619 : 1980 |
Identification code for shell type needle bearings (Including Sealed Bearing) | 0 | Jan, 2023 | Download | |
| 156 | IS 9804 : Part 1 : 2009/ISO 5296-1 |
Synchronous belt drivers - Belts: Part 1 pitch codes MXL, XL, l, H, XH and XXH - Metric and inch dimensions (First Revision) | 0 | Mar, 2018 | Buy | |
| 157 | IS 9804 : PART 2 : 2010/ISO 5296-2 (1 Revision) |
Synchronous Belt Drives - Belts Part 2 Pitch Codes MXL and XXL - Metric Dimensions | 0 | Mar, 2018 | Buy |