Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Environmental Testing Procedure for Electronic and Electrical Items )
Total Standards : 39
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS/ISO 11156 : 2011/IEC 60068-3-4:2023 |
Packaging Accessible Design General Requirements | 0 | ---- | Buy | |
| 2 | IS/ISO 11843 : Part 6 : 2019/IEC 60068-2-5:2018 (1 Revision) |
Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations (First Revision) | 0 | ---- | Buy | |
| 3 | IS 12343 : 2021/IEC 60068-2-17:2023 (2 Revision) |
Agricultural tractors - Operators seat technical requirements | 0 | ---- | Buy | |
| 4 | IS/ISO 14708 : Part 2 : 2019/IEC 60068-2-38:2021 (1 Revision) |
Implants for surgery Active implantable medical devices Part 2: Cardiac pacemakers First Revision | 0 | ---- | Buy | |
| 5 | IS 16197 : Part 7 : Sec 1 : 2018/IEC 62321-7: 2015 |
Determination of Certain Substances in Electrotechnical Products Part 7 Hexavalent Chromium Section 1 Presence of Hexavalent Chromium (Cr (VI)) in Colourless and Coloured Corrosion-Protected Coatings on Metals by the Colorimetric Method | 0 | Jun, 2023 | Buy | |
| 6 | IS 16197 : Part 7 : Sec 2 : 2020/IEC 62321-7-2:2017 |
Determination of Certain Substances in Electrotechnical Products Part 7 Hexavalent Chromium Section 2 Determination of hexavalent chromium ( Cr(VI) ) in polymers and electronics by colorimetric method | 0 | ---- | Buy | |
| 7 | IS 16197 : Part 8 : 2020/IEC 62321-8:2017 |
Determination of Certain Substances in Electrotechnical Products Part 8 Phthalates in Polymers by Gas Chromatography - Mass Spectrometry ( GC-MS ), Gas Chromatography - Mass Spectrometry Using a Pyrolyzer / Thermal Desorption Accessory ( Py-TD-GC-MS ) | 0 | ---- | Buy | |
| 8 | IS 16446 : 2021/IEC 60068-2-47:2005 (1 Revision) |
Systems and software engineering Systems and software Quality Requirements and Evaluation SQuaRE Quality measurement framework First Revision | 0 | ---- | Buy | |
| 9 | IS 17269 : 2021/IEC 60068-3-1:2023 (1 Revision) |
Identification Labelling and Marking of Pashmina Products (first revision of IS 17269) | 1 | ---- | Buy | |
| 10 | IS 17485 : Part 6 : 2021/IEC 60695-1-40: 2013 |
Measurement of water flow in closed conduits- Tracer Method Part 6 : Transit time method using non-radioactive tracers Adoption of ISO 2971-6:1977 | 0 | ---- | Buy | |
| 11 | IS 17797 : 2022 |
Health informatics Guidelines on data protection to facilitate Trans border flows of personal health data | 0 | ---- | Download | |
| 12 | IS 17840 : Part 1 : 2022/ISO 8362-1:2018 |
Cardiovascular Implants Cardiac Valve Prostheses Part 1 General Requirements | 0 | ---- | Buy | |
| 13 | IS 17848 : 2022/IEC 60068-2-30:2005 |
Confined Masonry For Earthquake Resistance Code of Practice | 0 | ---- | Buy | |
| 14 | IS 1891 : Part 1 : 2021/IEC 60068-2-14:2023 (5 Revision) |
CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision) | 0 | ---- | Buy | |
| 15 | IS/ISO/IEC 19086 : Part 2 : 2018/IEC 60068-2-2:2007 |
Information Technology Cloud Computing Service Level Agreement SLA Framework Part 2 : Metric Model | 0 | ---- | Buy | |
| 16 | IS/ISO 1997 : 2018/IEC 60068-2-18:2017 (1 Revision) |
Granulated cork and cork powder Classification properties and packing | 0 | ---- | Buy | |
| 17 | IS/ISO 20932 : Part 3 : 2018/IEC 60068-2-13:2021 |
Textiles - Determination of the elasticity of fabrics Part 3 Narrow fabrics | 0 | ---- | Buy | |
| 18 | IS 4840 : 2022 (3 Revision) |
Metallic powders Determination of flow rate by means of a calibrated funnel Hall flowmeter | 0 | ---- | Download | |
| 19 | IS/IEC 60580 : 2019/IEC 60068 -Part 2-1 : 2007 |
Medical electrical equipment Dose area product meters | 0 | ---- | Buy | |
| 20 | IS/IEC 60603 : Part 4 : 1987/IEC 60068-2-6 : 2007 |
Connectors for frequencies below 3 MHz for use with printed boards Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm ( 0.075 in )centres and staggered terminations at that same spacing | 0 | Sep, 2024 | Buy | |
| 21 | IS/IEC 60695 : Part 10 : Sec 2 : 2014/IEC 60695-10-2 |
Fire hazard testing: Part 10 Abnormal heat: Sec 2 ball pressure test method | 0 | May, 2022 | Buy | |
| 22 | IS/IEC 60695 : Part 11 : Sec 5 : 2016/IEC 60695-11-5:2016 |
Fire Hazard Testing Part 11 Test Flames Section 5 Needle - Flame test method - Apparatus, confirmatory test arrangement and guidance ( First Revision ) | 0 | Dec, 2023 | Buy | |
| 23 | IS/IEC 60695 : Part 11 : Sec 10 : 2013/IEC 60695-11-10 |
Fire hazard testing: Part 11 test flames :: Sec 10 50 w horizontal and vertical flame test methods | 0 | May, 2022 | Buy | |
| 24 | IS 6100 : 2021/IEC 60068-2-65: 2013 (2 Revision) |
SPECIFICATION FOR SODIUM TRIPOLYPHOSPHATE ANHYDROUS TECHNICALSecond Revision of IS 6100 | 0 | ---- | Buy | |
| 25 | IS/IEC 61196 : Part 1 : SEC 200 : 2005/IEC 61196-1-200(05) |
Coaxial communication cables: Part 1 - 200 environmental test methods - General requirements | 0 | Apr, 2021 | Buy | |
| 26 | IS/IEC 62817 : 2017/IEC 60721-3-7: 1995 |
Photovoltaic System - Design Qualification of Solar Trackers | 0 | ---- | Buy | |
| 27 | IS 745 : 2021/IEC 60068-2-68:1994 (4 Revision) |
Textiles Handloom cotton bed sheets Specification | 0 | ---- | Buy | |
| 28 | IS 9000 : Part 4 : 2020/IEC 60068-2-78 : 2012 (2 Revision) |
Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision ) | 0 | Dec, 2023 | Buy | |
| 29 | IS 9000 : Part 7 : Sec 1 : 2018/IEC 60068-2-27: 2008 (2 Revision) |
Basic environmental testing procedures for electronic and electrical items: Part 7 impact test: Sec 1 shock (Test Ea) (Second Revision) | 0 | Nov, 2021 | Buy | |
| 30 | IS 9000 : Part 7 : Sec 3 : 2019/IEC 60068-2-31 : 2008 |
Environmental testing: Part 7 tests :: Sec 3 test Ec: rough handling shocks, primarily for equipment - Types specimens (First Revision) | 0 | Jan, 2022 | Buy | |
| 31 | IS 9000 : Part 7 : Sec 7 : 2020/IEC 60068-2-75:2014 (1 Revision) |
Environmental Testing Part 7 Tests Section 7 Test Eh: Hammer tests ( First Revision ) | 0 | Dec, 2023 | Buy | |
| 32 | IS 9000 : Part 11 : 1983 |
Basic environmental testing procedures for electronic and electrical items: Part 11 salt mist test | 0 | Oct, 2019 | Download | |
| 33 | IS 9000 : Part 19 : Sec 1 to 5 : 1986 (1 Revision) |
Basic environmental testing procedures for electronic and electrical items: Part 19 test u: robustness of terminations and integral mounting devices (First Revision) | 0 | Oct, 2022 | Download | |
| 34 | IS 9000 : Part 22 : 1983 |
Basic environmental testing procedures for electronic and electrical items: Part 22 fine mist test | 0 | Oct, 2019 | Download | |
| 35 | IS 9001 : Part 19 : 2006 |
Guidance for environmental testing: Part 19 salt mist test | 0 | Oct, 2019 | Download | |
| 36 | IS 9001 : PART 20 : 2010/IEC 60068-3-11: 2007 |
Guidance for environmental testing: Part 20 calculation of uncertainty of conditions in climatic test chambers | 0 | Oct, 2022 | Buy | |
| 37 | IS 9401 : Part 19 : 2022/IEC 60068-2-7:1983 (1 Revision) |
Method of measurement of works in river valley projects Dams and appurtenant structures Part 19 Electro Mechnical Works | 0 | Buy | ||
| 38 | IS 9873 : Part 6 : 2021/IEC 60695-1-11:2014 (1 Revision) |
Safety of Toys Part 6 Determination of Certain Pthalate Esters in Toys and Childrens Products | 0 | ---- | Buy | |
| 39 | IS 9989 : 1981 |
Assessment of noise with respect to community response | 0 | Jul, 2023 | Buy |