Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 58
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 12448 (Part 2/Sec 1) : 1988 Reviewed In : 2019 |
Basic testing procedures and measuring methods for electrotechnical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 1 general examination | 0 | Jun, 2019 | Buy | |
| 2 |
IS 12448 (Part 5/Sec 1) : 1989 Reviewed In : 2016 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 1 impact tests (Free Components) | 0 | Jun, 2016 | Buy | |
| 3 |
IS 12448 (Part 5/Sec 2) : 1989 Reviewed In : 2016 |
Basic testing procedure and measuring methods for electromechanical components: Part 5 (Fixed For Electronic Equipment Impact Tests (Free Components), static load tests components), endurance tests and overload tests .: Sec 2 static load tests (Fixed Components) | 0 | Jun, 2016 | Buy | |
| 4 |
IS 12448 (Part 5/Sec 3) : 1989 Reviewed In : 2016 |
Basic testing measuring standard procedures and methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 3 endurance tests | 0 | Jun, 2016 | Buy | |
| 5 |
IS 12448 (Part 5/Sec 4) : 1989 Reviewed In : 2016 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 4 overload tests | 0 | Jun, 2016 | Buy | |
| 6 |
IS 12448 (Part 9) : 1992 Reviewed In : 2016 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment:Part 9 Cable-clamping tests, explosion hazard tests,chemical resistance tests,fire hazard tests of | 0 | Jun, 2016 | Buy | |
| 7 |
IS 13984 (Part 1) : 1995 Reviewed In : 2022 |
Link and Test Connectors:Part 1 Test Schedule and Requirements | 0 | Dec, 2022 | Buy | |
| 8 |
IS 13984 (Part 2/Sec 1) : 1994 Reviewed In : 2022 |
Link and test connectors specification: part 2 socket for conventional wiring: Sec 1 two - Way socket link and test connector | 0 | Jun, 2022 | Buy | |
| 9 |
IS 13984 (Part 2/Sec 2) : 1994 Reviewed In : 2022 |
Link and test connectors specification: Part 2 socket for conventiqnal wiring: Sec 2 three - Way socket link and test connector | 0 | Jul, 2022 | Buy | |
| 10 |
IS 13984 (Part 2/Sec 3) : 1994 Reviewed In : 2022 |
Link and test connectors - Specification: Part 2 socket for conventional wiring: Sec 3 four - Way socket link and test connector | 0 | Apr, 2022 | Buy | |
| 11 |
IS 13984 (Part 2/Sec 4) : 1995 Reviewed In : 2022 |
Link and test connectors - Specificaiton: Part 2 socket for conventional wiring: Sec 4 six - Way socket link and test connector | 0 | Nov, 2022 | Buy | |
| 12 |
IS 13984 (Part 3/Sec 1) : 1995 Reviewed In : 2022 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 1 two - Way flat mounting socket link and test connector | 0 | Oct, 2022 | Buy | |
| 13 |
IS 13984 (Part 3/Sec 2) : 1995 Reviewed In : 2022 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 2 two - Way upright mounting socket link and test connector | 0 | Oct, 2022 | Buy | |
| 14 |
IS 13984 (Part 3/Sec 3) : 1995 Reviewed In : 2022 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 3 three - Way socket link and test connector | 0 | Oct, 2022 | Buy | |
| 15 |
IS 13984 (Part 3/Sec 4) : 1995 Reviewed In : 2022 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 4 four - Way socket link and test connector | 0 | Oct, 2022 | Buy | |
| 16 |
IS 13984 (Part 3/Sec 5) : 1995 Reviewed In : 2022 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 5 six - Way socket link and test connector | 0 | Nov, 2022 | Buy | |
| 17 |
IS 13984 (Part 4/Sec 1) : 1995 Reviewed In : 2022 |
Ltnk and test connectors specification: Part 4 U - Link plug: Sec 1 U - Link polarized | 0 | Jun, 2022 | Buy | |
| 18 |
IS 13984 (Part 4/Sec 2) : 1995 Reviewed In : 2022 |
LlNk and test connectors specification: Part 4 u - Link plug: Sec 2 u - Link non - Polarized | 0 | Jul, 2022 | Buy | |
| 19 |
IS 13984 (Part 4/Sec 3) : 1995 Reviewed In : 2022 |
LlNk and test connectors specification: Part 4 u - Link plug: Sec 3 double u - Link plug polarized | 0 | Jul, 2022 | Buy | |
| 20 |
IS 13984 (Part 5/Sec 1) : 1995 Reviewed In : 2022 |
Link and test connectors specification: Part 5 cord plug: Sec 1 polarized | 0 | Jun, 2022 | Buy | |
| 21 |
IS 3544 : 1966 Reviewed In : 2019 (First Revision) |
General requirements and tests for tag strips (First Revision) | 0 | Feb, 2019 | Download | |
| 22 |
IS/IEC 60068-2-42 : 2003 |
Environmental testing - Part 2 Tests Section 42 Test Kc: Sulphur dioxide test for contacts and connections | 0 | ---- | Buy | |
| 23 |
IS/IEC 60068-2-43 : 2003 |
Environmental testing Part 2: Tests Test Kd Section 43: Hydrogen sulphide test for contacts and connections | 0 | ---- | Buy | |
| 24 |
IS/IEC 60130-9 : 2011 14443-2:2020 |
Connectors for frequencies below 3 MHz Part 9: Circular connectors for radio and associated sound equipment | 0 | ---- | Buy | |
| 25 |
IS/IEC 60297-3-100 : 2008 ISO/IEC 15693-1:2018 |
Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6 mm 19 in series Part 3-100: Basic dimensions of front panels subracks chassis racks and cabinets | 0 | ---- | Buy | |
| 26 |
IS/IEC 60297-3-101 : 2004 |
Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6 mm 19 in series Part 3-101: Subracks and associated plug-in units | 0 | ---- | Download | |
| 27 |
IS/IEC 60297-3-105 : 2008 |
Mechanical structures for electronic equipment Part 3 Dimensions of mechanical structures of the 482 6 mm 19 in series Section 105: Dimensions and design aspects for 1U high chassis | 0 | ---- | Buy | |
| 28 |
IS/IEC 60512-1 : 2018 |
Connectors for electrical and electronic equipment Tests and measurements Part 1: Generic specification | 0 | ---- | Buy | |
| 29 |
IS/IEC 60512-1-1 : 2002 |
Connectors for Electronic Equipment Tests and Measurements Part 1: General examination Section 1: Test 1a: Visual examination | 0 | ---- | Buy | |
| 30 |
IS/IEC 60512-1-2 : 2002 |
Connectors for Electronic Equipment Tests and Measurements Part 1: General Examination Section 2: Test 1b: Examination of Dimension and Mass | 0 | ---- | Buy | |
| 31 |
IS/IEC 60603-1 : 1991 ISO 16472:2006 ISO 16472:2006 |
Connectors for frequencies below 3 MHz for use with printed boards Part 1: Generic specification General requirements and guide for the preparation of detail specifications, with assessed quality | 0 | ---- | Buy | |
| 32 |
IS/IEC 60603-2 : 1995 |
Connectors for frequencies below 3 MHz for use with printed boards – Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features | 0 | ---- | Download | |
| 33 |
IS/IEC 60603-3 : 1987 |
Connectors for frequencies below 3 MHz for use with printed boards Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm(0.100 in)centres and staggered terminations at that same spacing | 1 | ---- | Download | |
| 34 |
IS/IEC 60603-4 : 1987 |
Connectors for frequencies below 3 MHz for use with printed boards Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm ( 0.075 in )centres and staggered terminations at that same spacing | 0 | ---- | Buy | |
| 35 |
IS/IEC 60603-5 : 1987 |
Connectors for frequencies below 3 MHz for use with printed boards Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing | 0 | ---- | Buy | |
| 36 |
IS/IEC 60603-6 : 1987 ISO 12642-2:2006 ISO 12642-2:2006 |
Connectors for frequencies below 3 MHz for use with printed boards Part 6: Edge-socket connectors and printed-board connectors with 2.54 mm (0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm (0.063 in) nominal thickness | 0 | ---- | Buy | |
| 37 |
IS/IEC 60603-8 : 1990 |
Connectors for frequencies below 3 MHz for use with printed boards Part 8: Two-part connectors for printed boards for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm | 0 | ---- | Download | |
| 38 |
IS/IEC 60603-11 : 1992 |
Connectors for frequencies below 3 MHz for use with printed boards Part 11: Detail specification for concentric connectors dimensions for free connectors and fixed connectors | 0 | ---- | Download | |
| 39 |
IS/IEC 60603-12 : 1992 |
Connectors for frequencies below 3 MHz for use with printed boards Part 12: Detail specification for dimensions general requirements and tests for a range of sockets designed for use with integrated circuits | 0 | ---- | Download | |
| 40 |
IS/IEC 60603-13 : 1995 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality for printed boards for basic grid of 2.54 mm(0.1 in) with free connectors for non-accessible insulation displacement terminations (ID) | 0 | ---- | Download | |
| 41 |
IS/IEC 60603-14 : 1998 ISO 15681-Part1: 2003 ISO 15681-Part1: 2003 |
Connectors for frequencies below 3 MHz for use with printed boards Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio video and audio-visual equipment | 0 | ---- | Buy | |
| 42 |
IS/IEC 60915 : 2006 ISO 17442-2:2020 ISO 17442-2:2020 |
Capacitors and resistors for use in electronic equipment Preferred dimensions of shaft ends bushes and for the mounting of single-hole bush-mounted shaft-operated electronic components | 0 | ---- | Buy | |
| 43 |
IS/IEC 60917-1 : 2019 |
Modular order for the development of mechanical structures for electrical and electronic equipment practices Part 1: Generic standard | 0 | ---- | Buy | |
| 44 |
IS/IEC 61020-1 : 2019 ISO 14708-7:2019 ISO 14708-7:2019 |
Electromechanical switches for use in electrical and electronic equipment Part 1: Generic specification | 0 | ---- | Buy | |
| 45 |
IS/IEC 61076-1 : 2019 ISO 23897:2020 |
Connectors for electronic equipment Product requirements Part 1: Generic specification | 0 | ---- | Buy | |
| 46 |
IS/IEC 61076-4-100 : 2001 63042-201 |
Connectors for electronic equipment Part 4-100: Printed board connectors with assessed quality Detail specification for two-part connector modules having a grid of 2.5 mm for printed boards and backplanes | 0 | ---- | Buy | |
| 47 |
IS/IEC 61076-4-101 : 2001 14443-4:2018 |
Connectors for electronic equipment Part 4-101: Printed board connectors with assessed quality Detail specification for two-part connector modules having a basic grid of 2.0 mm for printed boards and backplanes in accordance with IEC 60917 | 0 | ---- | Buy | |
| 48 |
IS/IEC 61076-4-102 : 1997 ISO 10322-2: 2016 ISO 10322-2: 2016 |
Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications – Part 4: Printed board connectors – Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 | 0 | ---- | Buy | |
| 49 |
IS/IEC 61076-4-103 : 1999 ISO 3630-1:2019 ISO 3630-1:2019 |
Connectors for use in dc low-frequency analogue and digital high speed data applications Part 4-103: Printed board connectors with assessed quality Detail specification for two-part connectors with shielding and a basic grid of 2.5 mm | 0 | ---- | Buy | |
| 50 |
IS/IEC 61076-4-104 : 1999 ISO/TR 13014 : 2012 ISO/TR 13014 : 2012 |
Connectors for use in d.c., low frequency analogue and digital high speed data applications – Part 4-104: Printed board connectors with assessed quality – Detail specification for two-part modular connectors, basic grid of 2.0 mm, with terminations on a multiple grid of 0.5 mm | 0 | ---- | Buy | |
| 51 |
IS/IEC 61076-4-105 : 1995 IEC 60050-725:1994 IEC 60050-725:1994 |
Connectors with assessed quality for use in dc low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry | 0 | ---- | Buy | |
| 52 |
IS/IEC 61076-4-107 : 2001 ISO 18611-1:2014 ISO 18611-1:2014 |
Connectors for electronic equipment – Part 4-107: Printed board connectors with assessed quality – Detail specification for shielded two-part connectors having a basic grid of 2.0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations | 0 | ---- | Buy | |
| 53 |
IS/IEC 61076-4-108 : 2002 |
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality -Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2.5 mm in accordance with IEC 60917-1 | 0 | ---- | Download | |
| 54 |
IS/IEC 61076-4-110 : 2001 |
Connectors for electronic equipment- Part 4-110: Printed board connectors with assessed quality Detail specification for latched cable connector system having a basic grid of 2.0 mm including full shielding and latching function | 0 | ---- | Download | |
| 55 |
IS/IEC 61076-4-113 : 2002 ISO 14502-1:2005 ISO 14502-1:2005 |
Connectors for electronic equipment – Printed board connectors – Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2.54 mm for printed boards and backplanes in bus applications | 0 | ---- | Buy | |
| 56 |
IS/IEC 61076-4-115 : 2003 ISO/TR 10929 : 2012 ISO/TR 10929 : 2012 |
Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment | 0 | ---- | Buy | |
| 57 |
IS/IEC 61076-4-116 : 2015 ISO 22776 : 2004 ISO 22776 : 2004 |
Connectors for electronic equipment Product requirements Part 4-116: Printed board connectors Detail specification for a high-speed two-part connector with integrated shielding function | 0 | ---- | Buy | |
| 58 |
IS/QC 960201-4-1 : 2005 Reviewed In : 2019 IECQC 960201 : Part 4 : Sec 1 : 2005 |
Electromechanical switches for use in electronic equipment: Part 4: Secal specification for lever (Toggle) switches: Sec 1 blank detail specification | 0 | Jun, 2019 | Buy |