Total Standards : 108
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS/ISO 20200 : 2015/ISO 20200:2015 (1 Revision) |
Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory - Scale test (First Revision) | 0 | ---- | Buy | |
| 2 | IS 13360 : Part 11 : Sec 1 : 1999/ISO 8295:1995 |
Plastics - Methods of testing part 11 special properties se&on 1 film and sheeting - Determination of coefficients of friction | 0 | Jul, 2020 | Buy | |
| 3 | IS 13360 : Part 5 : Sec 5 : 2017 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 5 determination of charpy impact properties - Non - Instrumented impact test (First Revision) | 0 | May, 2022 | Download | |
| 4 | IS/ISO 14853 : 2016/ISO 14853 (1 Revision) |
Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production | 0 | Mar, 2022 | Buy | |
| 5 | IS 13360 : Part 2 : Sec 11 : 2006/ISO 10724-2:1998 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 11 injection moulding offest specimens of thermosetting powder moulding compounds (Pmcs) - Small plates | 0 | Apr, 2021 | Buy | |
| 6 | IS 13360 : Part 8 : Sec 6 : 1997/ISO 2556:1974 |
Plastics - Methods of testing: Part 8 permanence/chemical properties section 6 determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method | 0 | Feb, 2018 | Buy | |
| 7 | IS 4669 : 1968 |
Methods of test for polyvinyl chloride resins | 1 | Feb, 2018 | Download | |
| 8 | IS 13360 : Part 6 : Sec 18 : 2013/ISO 75-3: 2004 (1 Revision) |
Plastics - Methods of testing: Part 6 thermal properties section 18 determination of temperature of deflection under load - High - Strength thermosetting laminates and long - Fibre - Reinforced plastics (First Revision) | 0 | Feb, 2023 | Buy | |
| 9 | IS 13360 : Part 8 : Sec 5 : 2019/ISO 177:2016 (1 Revision) |
Plastics — Methods of testing Part 8 Permanence / Chemical Properties Section 5 Determination of migration of plasticizers ( First Revision ) | 0 | ---- | Buy | |
| 10 | IS 13360 : Part 3 : Sec 9 : 1999 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 9 determination of moisture in plastics by coulometric regeneration of phosphorus pentoxide | 0 | Jul, 2020 | Download | |
| 11 | IS/ISO 16929 : 2019/ISO 16929: 2019 (2 Revision) |
Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test First Revision | 0 | ---- | Buy | |
| 12 | IS 13360 : Part 1 : 1992 |
Plastics - Methods of testing: Part 1 introduction | 0 | Feb, 2018 | Download | |
| 13 | IS 17863 : Part 4 : 2022/ISO 4892-4:2013 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 4 Open-Flame Carbon-Arc Lamps | 0 | ---- | Buy | |
| 14 | IS 13360 : Part 5 : Sec 2 : 2017/ISO 527-2 : 2012 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision) | 0 | May, 2022 | Buy | |
| 15 | IS/ISO 15985 : 2014/ISO 15985 : 2014 (1 Revision) |
Plastics - Determination of the ultimate anaerobic biodegradation under high - Solids anaerobic - Digestion conditions - Method by analysis of released biogas (First Revision) | 0 | May, 2023 | Buy | |
| 16 | IS 13360 : Part 11 : Sec 15 : 2022/ISO 12058-1 : 2018 (1 Revision) |
PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES Section 15 Determination of Viscosity using a Falling-Ball Viscometer Inclined-tube method | 0 | ---- | Buy | |
| 17 | IS 13360 : Part 6 : Sec 21 : 2023/ISO 871 : 2022 (1 Revision) |
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 21 DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE | 0 | ---- | Buy | |
| 18 | IS/ISO 14855 : PART 1 : 2000/ISO 14855-1:2012 (1 Revision) |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide: Part 1 general method (First Revision) | 0 | ---- | Buy | |
| 19 | IS 13360 : Part 3 : Sec 2 : 1997/ISO 60:1977 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 2 determination of apparent density of material that can be poured from a specified funnel | 0 | May, 2022 | Buy | |
| 20 | IS 13360 : Part 9 : Sec 9 : 2001 |
Plastics - Methods of testing: Part 9 optical properties section 9 determination of yellow index of plastics | 0 | Download | ||
| 21 | IS 8543 : Part 1 : Sec 1 : 1978 |
Methods of testing plastics: Part 1 characterization of polymer structure and size section 1 determination of molecular mass from viscosity | 0 | Jul, 2020 | Download | |
| 22 | IS 13360 : Part 5 : Sec 8 : 2013/ISO 604 : 2002 |
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of compressive properties (First Revision) | 0 | Feb, 2023 | Buy | |
| 23 | IS/ISO 13360 : Part 4 : Sec 5 : 2016/ISO 11443 : 1995 |
Plastics - Methods of Testing part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers | 0 | Buy | ||
| 24 | IS 13360 : Part 5 : Sec 1 : 2021/ISO 527-1: 2019 (2 Revision) |
Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision | 0 | ---- | Buy | |
| 25 | IS 13360 : Part 8 : Sec 14 : 2018/ISO 4611 : 2010 (1 Revision) |
Plastics - Methods of testing: Part 8 performance/chemical properties section 14 determination of the effects of exposure to damp heat, water spray and salt mist (First Revision) | 0 | Jun, 2023 | Buy | |
| 26 | IS 13360 : Part 10 : Sec 7 : 2004/ISO 308:1994 |
Plastics - Methods of testing: Part 10 resin (ThermosettlNg Properties) section 7 phenol - Formaldehyde mouldings - Determination of acetone - Soluble matter (Apparent Resin Content Of Material In The Unmoulded State) | 0 | Jul, 2020 | Buy | |
| 27 | IS 13360 : Part 5 : Sec 25 : 2004/ISO 527-4:1997 |
Plastics - Methods of testing: Part 5 mechanical properties section 25 determination of tensile properties - Test conditions for isotropic and orthotropic fibre - Reinforced plastic composites | 0 | Jul, 2020 | Buy | |
| 28 | IS 13360 : Part 5 : Sec 3 : 2022/ISO 527-3 : 2018 (2 Revision) |
PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 3 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR FILMS AND SHEETS | 0 | ---- | Buy | |
| 29 | IS 13360 : Part 2 : Sec 10 : 2006/ISO 10724-1:1998 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 10 injection moulding of test specimens of thermosetting powder moulding compounds (Pmcs) - General principles and moulding of multipurpose test specimens | 0 | Apr, 2021 | Buy | |
| 30 | IS 13360 : Part 8 : Sec 13 : 2021/ISO 4582:2017 (2 Revision) |
Plastics Methods Of Testing Part 8 Permanence chemical Properties Section 13 Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass Natural Weathering or Laboratory Light Sources First Revision of IS 1 | 0 | ---- | Buy | |
| 31 | IS 2530 : 1963 |
Methods of test for polyethylene moulding materials and polyethylene compounds | 0 | Feb, 2018 | Download | |
| 32 | IS 13360 : Part 6 : Sec 10 : 2023/ISO 3146 : 2022 (2 Revision) |
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 10 DETERMINATION OF MELTING BEHAVIOUR MELTING TEMPERATURE OR MELTING RANGE OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING - MICROSCOPE METHODS | 0 | ---- | Buy | |
| 33 | IS 13360 : Part 6 : Sec 20 : 2019/ISO 4589-3:2017 (1 Revision) |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 20 Flammability by oxygen index ? Elevated temperature test ( First Revision ) | 0 | ---- | Buy | |
| 34 | IS 13360 : Part 3 : Sec 7 : 1999/ISO 1675:1985 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 7 liquid resins - Determination of density by the pyknometer method | 0 | Jul, 2020 | Buy | |
| 35 | IS 13360 : Part 11 : Sec 14 : 2006/ISO 11501:1995 |
Plastics - Methods of: Part 11 special properties testing section 14 film and sheeting - Determination of dimensional change on heating | 0 | Apr, 2021 | Buy | |
| 36 | IS 11022 : 1984 |
Methods of sampling and test for glues (bone, skin/fleshings and fish glues) | 0 | Jul, 2020 | Download | |
| 37 | IS 17863 : Part 3 : 2022/ISO 4892-3:2016 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 3 Fluorescent UV Lamps | 0 | ---- | Buy | |
| 38 | IS 13360 : Part 5 : Sec 19 : 1999 |
Plastics - Methods of testing: Part 5 mechanical properties section 19 determination of resistance of plastic materials to abrasion | 0 | Jul, 2020 | Download | |
| 39 | IS/ISO 17556 : 2019/ISO 17556 : 2019 (2 Revision) |
Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Revision | 0 | ---- | Buy | |
| 40 | IS 13360 : Part 11 : Sec 13 : 2006/ISO 8570:1991 |
Plastics - Methods of testing: Part 11 special properties section 13 film and sheeting - Determination of cold - Crack temperature | 0 | Apr, 2021 | Buy | |
| 41 | IS 13360 : Part 6 : Sec 14 : 2004 |
Plastics - Methods of testing: Part 6 thermal properties section 14 standard test method for coefficient of linear thermal expansion of plastics between - 30°C and 30°C with a vitreous silica dilatometer | 0 | Jul, 2020 | Download | |
| 42 | IS 13360 : Part 9 : Sec 10 : 2018 |
Plastics - Methods of testing: Part 9 optical properties section 10 qualitative evaluation of the bleeding of colorants | 0 | Oct, 2023 | Download | |
| 43 | IS 13360 : Part 2 : Sec 9 : 2021/ISO 294-2: 2018 (1 Revision) |
PLASTICS - Methods of Testing: Part 2 Sampling and Preparation of Test Specimens Section 9 Injection Moulding of Test Specimens of Thermoplastic Materials - Small Tensile Bars First Revision | 0 | ---- | Buy | |
| 44 | IS 13360 : Part 9 : Sec 5 : 1999 |
Plastics - Methods of testing: Part 9 optical properties section 5 determination of haze and luminous transmittance of transparent plastics | 0 | Jul, 2020 | Download | |
| 45 | IS 8402 : 1987 (1 Revision) |
Methods of sampling and test for pressure sensitive adhesive tapes (First Revision) | 0 | Jul, 2020 | Download | |
| 46 | IS 13360 : Part 5 : Sec 4 : 2021/ISO 180 : 2019 (1 Revision) |
Plastics - Methods of Testing Part 5 : Mechanical Properties Sec 4 Determination of Izod Impact Strength | 0 | ---- | Buy | |
| 47 | IS 13360 : Part 3 : Sec 12 : 2016/ISO 1183-3 : 1999 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 12 determination of density of non - Cellular plastics - Gas pyknometer method | 0 | Apr, 2021 | Buy | |
| 48 | IS 13360 : Part 4 : Sec 4 : 1999 |
Plastics - Methods of testing: Part 4 rheological properties section 4 determination of properties of polymeric materials by means of a capillary rheometer | 0 | Jul, 2020 | Download | |
| 49 | IS/ISO 14855 : PART 2 : 2018/ISO 14855-2:2018 (1 Revision) |
DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS UNDER CONTROLLED COMPOSTING CONDITIONS METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE PART 2 GRAVIMETRIC MEASUREMENT OF CARBON DIOXIDE EVOLVED IN A LABORATORY-SCALE TEST Fi | 0 | ---- | Buy | |
| 50 | IS 13360 : Part 10 : Sec 6 : 2004/ISO 120:1977 |
Plastics - Methods of testing: Part 10 resin (Thermosetting Properties) section 6 phenol - Formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Calorimetric comparison method | 0 | Jul, 2020 | Buy | |
| 51 | IS 13360 : Part 5 : Sec 24 : 1999/ISO 7765-2:1995 |
Plastics - Methods of testing: Part 5 mechanical properties section 24 determination of impact resistance by the free - Failing dart method - Instrumented punctureTest | 0 | Jul, 2020 | Buy | |
| 52 | IS 13360 : Part 11 : Sec 7 : 2018/iso 6427 : 2013 (1 Revision) |
Plastics - Methods of testing: Part 11 special properties section 7 determination of matter extractable by organic solvents (Conventional Method) (First Revision) | 0 | Aug, 2023 | Buy | |
| 53 | IS 13360 : Part 2 : Sec 1 : 2016/ISO 293 : 2004 (1 Revision) |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 1 plastics - Compression moulding of test specimens of thermoplastic materials (First Revision) | 0 | Apr, 2021 | Buy | |
| 54 | IS 13360 : Part 6 : Sec 9 : 2001 |
Plastics - Methods of testing: Part 6 thermal properties section 9 determination of density of smoke from the burning or decomposition of plastics | 0 | Download | ||
| 55 | IS 2221 : 1962 |
Methods of test for aminoplastic moulding materials | 1 | Jul, 2020 | Download | |
| 56 | IS 13360 : Part 6 : Sec 19 : 2019/ISO 4589-2:2017 (1 Revision) |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 19 Flammability by oxygen index ? Ambient temperature test ( First Revision ) | 0 | ---- | Buy | |
| 57 | IS 13360 : Part 3 : Sec 6 : 2000/ISO 4591:1992 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 6 film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll by gravimetric techniques (Gravimetric Thickness) | 0 | Apr, 2021 | Buy | |
| 58 | IS/ISO 14852 : 2021/ISO 14852 : 2021 (1 Revision) |
Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Analysis of Evolved Carbon Dioxide First Revision | 0 | ---- | Buy | |
| 59 | IS 13360 : Part 3 : Sec 5 : 2013/ISO 2577 : 2007 (1 Revision) |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 5 thermosetting moulding materials - Determination of shrinkage (First Revision) | 0 | Feb, 2023 | Buy | |
| 60 | IS 17863 : Part 2 : 2022/ISO 4892-2:2013 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 2 Xenon-Arc Lamps | 0 | ---- | Buy | |
| 61 | IS 13360 : Part 5 : Sec 14 : 2001 |
Plastics - Methods of testing: Part 5 mechanical properties section 14 determination of indentation hardness of rigid plastic by means of barcol impressor | 0 | Download | ||
| 62 | IS 13360 : Part 8 : Sec 11 : 2018/ISO 22088-2:2006 (1 Revision) |
Plastics - Methods of testing: Part 8 performance/chemical properties section 11 determination of environmental stress cracking (Esc) - Constant - Tensile load method (First Revision) | 0 | Jun, 2023 | Buy | |
| 63 | IS 13360 : Part 11 : Sec 11 : 1999/ISO 3219:1993 |
Plastics - Methods of testing: Part 11 special properties section 11 polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate | 0 | Jul, 2020 | Buy | |
| 64 | IS 13360 : Part 6 : Sec 11 : 2004/ISO 974:2000 |
Plastics - Methods of testing: Part 6 thermal properties section 11 determination of the brittleness temperature by impact | 0 | Jul, 2020 | Buy | |
| 65 | IS 13360 : Part 5 : Sec 10 : 2018/ISO 6383-1:2015 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 10 determination of tear resistance of plastics films and sheeting - Trouser tear method (First Revision) | 0 | Sep, 2023 | Buy | |
| 66 | IS 13360 : Part 2 : Sec 7 : 2021/ISO 294-3 (3 Revision) |
Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 7 Injection moulding of test specimens of thermoplastic materials - Small plates Third Revision | 0 | ---- | Buy | |
| 67 | IS 13360 : Part 9 : Sec 1 : 2004/ISO 489:1999 |
Plastics - Methods of testing: Part 9 optical properties section 1 determination of refractive index | 0 | Jul, 2020 | Buy | |
| 68 | IS 7437 : 1974 |
Methods of sampling and test for vegetable adhesives | 0 | Jul, 2020 | Download | |
| 69 | IS 13360 : Part 5 : Sec 11 : 2013/ISO 868 : 2003 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 11 determination of indentation hardness by means of durometer (Shore Hardness) (First Revision) | 0 | Feb, 2023 | Buy | |
| 70 | IS 13360 : Part 3 : Sec 11 : 2021/ISO 1183-2: 2019 (1 Revision) |
Plastics Methods of Testing: Part 3 Physical and Dimensional Properties Section 11 Determination of Density of Non-cellular Plastics Density Gradient Column Method First Revision | 0 | ---- | Buy | |
| 71 | IS 13360 : Part 4 : Sec 2 : 1999 |
Plastics - Methods of testing: Part 4 theological properties section 2 cup flow of phenolic and alkyd moulding materials | 0 | Jul, 2020 | Download | |
| 72 | IS 8543 : Part 13 : Sec 1 : 1977 |
Methods of testing plastics: Part 13 tests for specific products section 1 buttons (Thermosetting) | 0 | Jul, 2020 | Download | |
| 73 | IS 13360 : Part 10 : Sec 5 : 2004/ISO 119:1977 |
Plastics - Methods of testing: Part 10 resin (Thermoseiting Properties) section 5 phenol - Formaldehyde mouldings - Determination of free phenols - Iodometric method | 0 | Jul, 2020 | Buy | |
| 74 | IS 13360 : Part 5 : Sec 23 : 1996/ISO 6383-2:1983 |
Plastics - Methods of testing: Part 5 mechanical properties section 23 determination of tear resistance of plastics film and sheeting - Elmendorf method | 0 | Feb, 2023 | Buy | |
| 75 | IS 13360 : Part 8 : Sec 4 : 2018 (1 Revision) |
Plastics - Methods of testing: Part 8 permanece/chemical properties section 4 determination of loss of plasticizers - Activated carbon method (First Revision) | 0 | May, 2023 | Download | |
| 76 | IS 13360 : Part 11 : Sec 5 : 2001/ISO 2115:1996 |
Plastics - Methods of testing: Part 11 special properties - Section 5 determination of white point temperature and minimum film - Forming temperature | 0 | Apr, 2021 | Buy | |
| 77 | IS 13360 : Part 6 : Sec 23 : 2006/ISO 9773:1998 |
Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source | 1 | Dec, 2022 | Buy | |
| 78 | IS 13360 : Part 6 : Sec 6 : 2019/ISO 4589-1:2017 (2 Revision) |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 6 Flammability by oxygen index ? General requirements ( Second Revision ) | 0 | ---- | Buy | |
| 79 | IS 13360 : Part 3 : Sec 4 : 1995/ISO 171:1980 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 4 determination of bulk factor of moulding materials | 1 | Feb, 2018 | Buy | |
| 80 | IS 1998 : 1962 |
Methods of test for thermosetting synthetic resin bonded laminated sheets | 1 | Feb, 2018 | Download | |
| 81 | IS 9845 : 1998 (2 Revision) |
Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision) | 0 | Jul, 2020 | Download | |
| 82 | IS 13360 : Part 2 : Sec 5 : 2018/ISO 3167:2014 (2 Revision) |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 5 multipurpose test specimens (Second Revision) | 0 | Mar, 2023 | Buy | |
| 83 | IS 17863 : Part 1 : 2022/ISO 4892-1: 2016 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 1 General Guidance | 0 | ---- | Buy | |
| 84 | IS 13360 : Part 5 : Sec 13 : 1992 |
Plastics - Methods of testing: Part 5 mechanical properties section 13 determination of rockwell hardness | 0 | Feb, 2023 | Download | |
| 85 | IS 13360 : Part 8 : Sec 8 : 2021/ISO 3451-1:2019 (2 Revision) |
Plastics Methods of testing Part 8 Permanencechemical properties Section 8 Determination of Ash General Methods First Revision | 0 | ---- | Buy | |
| 86 | IS 13360 : Part 11 : Sec 10 : 2022/ISO 2555 : 2018 (1 Revision) |
PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 10 RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS DETERMINATION OF APPARENT VISCOSITY USING A SINGULAR CYLINDER TYPE ROTATIONAL VISCOMETER METHOD | 0 | ---- | Buy | |
| 87 | IS 13360 : Part 5 : Sec 6 : 1999/ISO 7765-1:1988 |
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of impact resistance by the free - Falling dart method - Staircase methods | 0 | Jul, 2020 | Buy | |
| 88 | IS 13360 : Part 8 : Sec 3 : 2018/ISO 175:2010 (1 Revision) |
Plastics - Methods of testing: Part 8 permanence / chemical properties section 3 determination of the effects of the immersion in liquid chemicals (First Revision) | 0 | Sep, 2023 | Buy | |
| 89 | IS 13360 : Part 2 : Sec 4 : 2021/ISO 2818: 2018 (1 Revision) |
Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 4 Preparation of test specimens by machining Second Revision | 0 | ---- | Buy | |
| 90 | IS 13360 : Part 8 : Sec 9 : 2022/ISO 22088-3 : 2006 (1 Revision) |
PLASTICS - METHODS OF TESTING PART 8 PERMANENCECHEMICAL PROPERTIES SECTION 9 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BENT STRIP METHOD | 0 | ---- | Buy | |
| 91 | IS 7188 : 1974 |
Methods of test for cellulose acetate flakes | 0 | Jul, 2020 | Download | |
| 92 | IS 13360 : Part 6 : Sec 3 : 2022/ISO 75-1 : 2020 (3 Revision) |
PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD | 0 | ---- | Buy | |
| 93 | IS 13360 : Part 3 : Sec 10 : 2021/ISO 1183-1: 2019 (1 Revision) |
Plastics Methods of Testing Part: 3 Physical and Dimensional Properties Section 10 Determination of Density of Non-cellular Plastics Immersion Method Liquid Pyknometer Method and Titration Method First Revision | 0 | ---- | Buy | |
| 94 | IS 13360 : Part 4 : Sec 1 : 2000/ISO 1133:1997 (1 Revision) |
Plastics - Methods of testing: Part 4 rheological properties section 1 determination of the melt mass - Flow rate (Mfj3)And the melt volume - Flow rate (Mvr) of thermoplastics (First Revision) | 0 | Feb, 2018 | Buy | |
| 95 | IS 13360 : Part 4 : Sec 3 : 2004 |
Plastics - Methods of testing: Part 4 rhelogical properties section 3 determination of spiral flow of low - Pressure thermosetting moulding compounds | 0 | Jul, 2020 | Download | |
| 96 | IS 13360 : Part 10 : Sec 4 : 2001 |
Plastics - Methods of testing: Part 10 thermosetting properties section 4 determination of gel time and peak exothermic temperature of reacting thermosetting resins | 0 | Apr, 2021 | Buy | |
| 97 | IS 17864 : 2022/ISO 9370: 2017 |
Plastics Instrumental Determination of Radiant Exposure in Weathering Tests General Guidance and Basic Test Method | 0 | ---- | Buy | |
| 98 | IS 13360 : Part 5 : Sec 22 : 2017 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 22 determination of resistance to wear by abrasive wheels (First Revision) | 0 | May, 2022 | Download | |
| 99 | IS 13360 : Part 6 : Sec 1 : 2018/ISO 306:2013 (2 Revision) |
Plastics - Methods of testing : Part 6 thermal properties, Section 1 determination of vicat softening temperature of thermoplastic materials (Second Revision) | 0 | ---- | Buy | |
| 100 | IS 13360 : Part 11 : Sec 4 : 1999 |
Plastics - Methods of testing: Part 11 special properties section 4 determination of gel count of plastics film | 0 | Jul, 2020 | Buy | |
| 101 | IS 13360 : Part 6 : Sec 22 : 2006/ISO 2575:1993 |
Plastics - Methods of testing: Part 6 thermal properties section 22 determination of time - Temperature limits after prolonged exposure to heat | 0 | Apr, 2021 | Buy | |
| 102 | IS 13360 : Part 2 : Sec 3 : 2019/ISO 294-1:2017 (1 Revision) |
Plastics ? Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 3 Injection moulding of test specimens of thermoplastic materials - General principles and moulding of multipurpose and bar test specimens ( First Revision ) | 0 | ---- | Buy | |
| 103 | IS 13360 : Part 3 : Sec 3 : 1997/ISO 61:1976 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 3 determination of apparent density of moulding material that cannot be poured from a specified funnel | 0 | May, 2022 | Buy | |
| 104 | IS 13360 : Part 6 : Sec 17 : 2017/ISO 75-2 :2013 (2 Revision) |
Plastics - Methods of testing: Part 6 thermal properties section 17 determination of temperature of deflection under load - Plastics and ebonite (Second Revision) | 0 | May, 2022 | Buy | |
| 105 | IS 867 : 1963 |
Methods of test for phenolic moulding materials (Revised) | 0 | Feb, 2018 | Download | |
| 106 | IS 13360 : Part 2 : Sec 2 : 2013/ISO 295 : 2004 (1 Revision) |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 2 compression moulding of test specimens of thermosetting materials (First Revision) | 0 | Feb, 2023 | Buy | |
| 107 | IS 13360 : Part 5 : Sec 27 : 2022/ISO 8256: 2004 |
Plastics — Methods of Testing Part 5 Mechanical Properties Section 27 Determination of tensile-impact strength | 0 | ---- | Buy | |
| 108 | IS 13360 : Part 5 : Sec 12 : 2017 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 12 determination of hardness - Ball indentation method (First Revision) | 0 | May, 2022 | Download |