|
1 |
IS 10175 : Part 1 : 1993 |
Mechanical testing of metals -Modified erichsen cupping test - sheet and strip Pt 1 Thickness upto 2 mm |
Methods of tests |
------ |
|
2 |
IS 10588 : 1983 |
Tables of Brinell hardness values for use in test made on flat surfaces |
------ |
------ |
|
3 |
IS 10623 : 1983 |
Drop weight tear test on ferritic steels and line pipe |
Methods of tests |
IS 10623 : 2023 |
|
4 |
IS 10927 : Part 1 : 1984 |
Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces - Part 1 : HV 5 to HV 100 |
------ |
------ |
|
5 |
IS 10927 : Part 2 : 1984 |
Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces - Part 2 : Hv 0.2 to Less Than Hv 5 |
------ |
------ |
|
6 |
IS 10927 : Part 3 : 1991 |
Tables of Vickers Hardness Values for use in Tests Made on Flat Surfaces - Part 3 : Less than HV 0.2 |
------ |
------ |
|
7 |
IS 11999 : 2007 |
Method for Determination of Plastic Strain Ratio 'r' for Steel Metals |
Methods of tests |
------ |
|
8 |
IS 12514 : 1988 |
Method for torsional stress fatigue testing |
Methods of tests |
Decided by Council |
|
9 |
IS 12872 : 2011 |
Metallic materials - Calibration of extensometers used in uniaxial testing (First Revision) |
Methods of tests |
------ |
|
10 |
IS 13838 : 1993 |
Mechanical Testing Of Metals - Determination Of Poisson's Rates |
Code of Practice |
IS 13838 : 2023 |
|
11 |
IS 1499 : 1977 |
Method for charpy impact test (U - Notch) for metals (First Revision) |
Methods of tests |
Decided by Council |
|
12 |
IS 1500 : 2005 |
Method for Brinell Hardness Test for Metallic Materials |
Methods of tests |
------ |
|
13 |
IS 1500 : Part 2 : 2013 |
Matallic Materials - Brinell Hardness Test Part 2 Verification and Calibration Testing Machines |
Methods of tests |
------ |
|
14 |
IS 1501 : 2002 |
Method For Vickers Hardness Test for Metallic Materials |
Methods of tests |
------ |
|
15 |
IS 1521 : 1972 |
Method for tensile testing of steel wire |
------ |
IS 1608 |
|
16 |
IS 15756 : 2007 |
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent |
Methods of tests |
IS 15756 : 2022/ISO 10275 : 2020 |
|
17 |
IS 1586 : 2000 |
Method for Rockwell Hardness Test for Metallic Material (Scales A-B-C-D-E-F-G-H-K 15N, 30N, 45N, 15T, 30T and 45T) |
Methods of tests |
------ |
|
18 |
IS 1586 : Part 3 : 2012 |
Metallic materials - Rockwell hardness test: Part 3 calibration of reference blocks (Scales, A, B, C, D, E, F, G, H, K, N, T) (Fourth Revision) |
Methods of tests |
------ |
|
19 |
IS 1599 : 2019 |
Metallic materials - Bend test (Fourth Revision) |
Methods of tests |
IS 1599 : 2023 |
|
20 |
IS 1608 : 2005 |
Mechanical testing of metals - Tensile Testing |
Methods of tests |
IS 1608 (Part 1) & (Part 3) |
|
21 |
IS 1608 : Part 1 : 2018 |
Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision) |
Methods of tests |
------ |
|
22 |
IS 1663 : 1972 |
Method for tensile testing of steel sheet and strip of thickness 0.5 mm to 3 mm |
------ |
IS 1608 |
|
23 |
IS 1663 : Part 2 : 1962 |
Tensile testing of steel sheet and strip: Part 2 Steel, sheet and strip of thickness above 3 mm |
------ |
------ |
|
24 |
IS 16842 : 2018 |
Metallic materials - Fatigue testing - Fatigue crack growth method |
Methods of tests |
------ |
|
25 |
IS 1692 : 1974 |
Method for simple bend testing of steel sheet and strip less than 3 mm thick |
------ |
IS 1599 |
|
26 |
IS 17143 : 2019 |
Metallic materials - Torque - Controlled fatigue testing |
Methods of tests |
IS 17143 : 2023/ISO 1352 : 2021 |
|
27 |
IS 17146 : Part 1 : 2019 |
Metallic materials - Sheet and strip - Determination of forming - Limit curves: Part 1 measurement and application of forming - Limit diagrams in the press shop |
Methods of tests |
IS 17146 (Part 1) : 2023/ISO 12004-1 : 2020 |
|
28 |
IS 17146 : Part 2 : 2019 |
Metallic materials - Sheet and strip - Determination of forming - Limit curves: Part 2 determination of forming - Limit curves in the laboratory |
Methods of tests |
IS 17146(Part 2):2022 |
|
29 |
IS 17151 : 2019 |
Metallic materials - Unified method of test for the determination of quasistatic fracture toughness |
Methods of tests |
IS 17151 : 2023 |
|
30 |
IS 1716 : 1985 |
Method for reverse bend test for metallic wire (Second Revision) |
Methods of tests |
IS 1716:2023 |
|
31 |
IS 17415 : 2020 |
Metallic Materials - Torsion Test at Ambient Temperature |
Methods of tests |
IS 17415 : 2023 |
|
32 |
IS 1754 : 2002 |
Method for verification of vickers hardness testing machines (Third Revision) |
Methods of tests |
Decided by council |
|
33 |
IS 1754 : Part 1 : 1986 |
Method for Verification of Vickers Hardness Testing Machines: Part I HV 0.2 to HV 100 |
------ |
------ |
|
34 |
IS 1754 : Part 2 : 1986 |
Method for Verification of Vickers Hardness Testing Machines: Part 2 Less than HV 0.2 |
------ |
------ |
|
35 |
IS 1756 : 1974 |
Methods of modified Erichsen cupping test for steel sheet and strip |
------ |
IS 10175 |
|
36 |
IS 1757 : PART 1 : 2014 |
Metallic Materials Charpy Pendulum Impact Test Part 1 Test Method |
Code of Practice |
|
|
37 |
IS 1789 : 1961 |
Method for brinell hardness test for grey cast iron |
------ |
IS 1500 |
|
38 |
IS 1790 : 1961 |
Method for brinell hardness test for light metals and their alloys |
------ |
IS 1500 |
|
39 |
IS 1810 : 1961 |
Method for vickers hardness test for light metals and their alloys |
------ |
------ |
|
40 |
IS 1816 : 1979 |
Method for tensile test for light metals and their alloys |
------ |
IS 1608 |
|
41 |
IS 1828 : Part 1 : 2015 |
Metallic materials - Verification of static uniaxial testing machines: Part 1 tension/compression testing machines - Verification and calibration of the force - Measuring system (Fourth Revision) |
Methods of tests |
|
|
42 |
IS 1894 : 1972 |
Criteria for earthquake resistant design of structures (Fourth Revision) |
------ |
IS 1608 and IS 6018 |
|
43 |
IS 2078 : 1979 |
Method for tensile testing of grey cast iron |
------ |
IS 1608 |
|
44 |
IS 223 : 1950 |
Tensile Testing Of Metals (ferrous) |
------ |
------ |
|
45 |
IS 2281 : 2005 |
Method for Verification of Brinell Hardness Testing Machines |
Methods of tests |
------ |
|
46 |
IS 2330 : 2011 |
Metallic materials - Tube - Flanging test (Second Revision) |
Methods of tests |
------ |
|
47 |
IS 2348 : 1963 |
Method for drift expanding test on copper and copper alloy tubes |
------ |
IS 2335 |
|
48 |
IS 2654 : 1977 |
Method for tensile testing of copper and copper alloys |
------ |
IS 1608 |
|
49 |
IS 2655 : 1964 |
Method for tensile testing of copper and copper alloy tubes |
------ |
IS 1608 |
|
50 |
IS 2656 : 1964 |
Method for tensile testing of copper and copper alloy wires |
------ |
IS 1608 |
|
51 |
IS 2657 : 1964 |
Method for tensile testing of aluminium and aluminium alloy tube |
------ |
IS 1608 |
|
52 |
IS 2658 : 1964 |
Method for tensile testing for aluminium and aluminium alloy wire |
------ |
IS 1608 |
|
53 |
IS 2866 : 1968 |
Method for Vickers hardness test for copper and copper alloys |
------ |
IS 1501 : Part 1 |
|
54 |
IS 3054 : 1965 |
Method for Brinell hardness test for copper and copper alloys |
------ |
IS 1500 |
|
55 |
IS 3260 : 1965 |
Method For Bend Test For Copper And Copper Alloys |
------ |
IS 1599 |
|
56 |
IS 3388 : 1965 |
Method for wrapping test for copper and copper alloy wire |
------ |
IS 1755 |
|
57 |
IS 3408 : 1965 |
Method for non-interrupted creep testing of steel at elevated temperature |
------ |
IS 3407 : Part 1 |
|
58 |
IS 3409 : 1965 |
Method for creep stress rupture testing of steel of elevated temperature |
------ |
IS 3407 : Part 2 |
|
59 |
IS 3754 : 1988 |
Method for calibration of standardized blocks to be used for Rockwell hardness testing machines(Scales A-B-C-D-E-F-G-H-K) |
------ |
IS 1586 |
|
60 |
IS 3766 : 1977 |
Method for calibration of pendulum impact testing machines for testing metals (First Revision) |
Code of Practice |
Decided by Council |
|
61 |
IS 3803 : Part 1 : 1989 |
Steel - Conversion of elongation values: Part 1 carbon and low alloy steels (Second Revision) |
Dimensions |
IS 3803(Part 1):2023 |
|
62 |
IS 3803 : Part 2 : 1989 |
Steel - Conversion of elongation values: Part 2 austenitic steels (Second Revision) |
Dimensions |
IS 3803(Part 2):2023 |
|
63 |
IS 3804 : 1988 |
Method for calibration of Rockwell hardness testing machines (Scales A-B-C-D-E-F-G-H-K) |
------ |
IS 1586 |
|
64 |
IS 4132 : 2005 |
Method for calibration of standardized blocks to be used for Brinell hardness teing machines |
Code of Practice |
------ |
|
65 |
IS 4133 : 2002 |
Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines |
Methods of tests |
------ |
|
66 |
IS 4133 : Part 1 : 1986 |
Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines - Part 1 : HV 0.2 to HV 100 |
Code of Practice |
------ |
|
67 |
IS 4168 : 1967 |
Method for wrapping test of aluminium and aluminium alloy wire |
------ |
IS 1717 |
|
68 |
IS 4176 : 1967 |
Method for simple torsion test of aluminium and aluminium alloy wire |
------ |
IS 1717 |
|
69 |
IS 4177 : 1967 |
Method for flattening test of aluminium and aluminium alloy tubes |
------ |
IS 2328 |
|
70 |
IS 4598 : 1968 |
Method for simple bend test for aluminium and aluminium alloy sheet and strip of thickness between 0.2 mm and 7 mm |
------ |
IS 1599 |
|
71 |
IS 4599 : 1968 |
Method For Drift Expanding Test On Aluminium And Aluminium Alloy Tubes |
------ |
IS 2335 |
|
72 |
IS 4713 : 1968 |
Method for determination of lower yield stress, proof stress and proving test for steel at elevated temperatures |
------ |
IS 1608 |
|
73 |
IS 497 : 1953 |
Tensile testing of metals (non-ferrous) |
------ |
------ |
|
74 |
IS 5071 : 1969 |
Method for flattening test for copper and copper alloy tubes of circular section |
------ |
IS 2328 |
|
75 |
IS 5072 : 1988 |
Method for Rockwell Superficial Hardness Test (scale 15n, 30n, 45n, 15t, 30t and 45t) |
------ |
IS 1586 |
|
76 |
IS 5073 : 1988 |
Method for verification of Rockwell superficial hardness testing machines (Scales 15N,30N,45N, 15T,30T and 45T) |
------ |
IS 1586 |
|
77 |
IS 5074 : 1969 |
Method of axial load fatigue testing of steel |
Methods of tests |
IS 5074:2023/ISO 1099:2020 |
|
78 |
IS 5075 : 1985 |
Method of rotating bar bending fatigue testing of metals (First Revision) |
Methods of tests |
IS 5075:2023 |
|
79 |
IS 5076 : 1988 |
Method for calibration of standardized blocks to be used for rockwell superficial hardness testing machines (Scales 15N,30N,45N,15T,30T and 45T) |
------ |
IS 1586 |
|
80 |
IS 5619 : 1970 |
Recommendations for fatigue testing of metals |
------ |
------ |
|
81 |
IS 6253 : 1971 |
Method for simple torsion testing of copper and copper alloy wire |
------ |
IS 1717 |
|
82 |
IS 6520 : 1972 |
Method for the determination of K-values of a tensile testing system |
------ |
------ |
|
83 |
IS 6878 : 1973 |
Method of reverse bend testing of copper and copper alloy wire |
------ |
IS 1716 |
|
84 |
IS 6885 : 1973 |
Method for Knoop hardness testing of metals |
------ |
6885 PART 1 TO 4 : 2011 |
|
85 |
IS 7095 : 1973 |
Method for verification of Knoop hardness testing machines |
------ |
------ |
|
86 |
IS 7097 : 1973 |
Method for Calibration of Standardized Blocks for Verification of Knoop Hardness Testing Machines |
------ |
------ |
|
87 |
IS 8285 : 1976 |
Method for tensile test of copper and copper alloy rolled flat product (thickness less than 2.5 mm) |
------ |
IS 1608 |
|
88 |
IS 8632 : 1977 |
Method for identification of test piece axes |
Code of Practice |
------ |
|
89 |
IS 9258 : 1979 |
Method for vickers micro-hardness testing of metals |
------ |
IS 1501 : Part 3 |
