| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 3196 : Part 3 : 2012 |
Welded low carbon steel cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Part 3 methods of test (First Revision) |
MED 16 |
| 2 |
IS 13975 : 1994 |
Axial (End - To - End) compression strength of composite cans, tubes and cores - Method of test |
CHD 16 |
| 3 |
IS 13237 : 1991 |
Metallic foil - Tension testing |
MTD 3 |
| 4 |
IS 5245 : Part 2 : 2013 |
Methods for splicing of wire ropes: Part 2 wire rope sling legs with ferrule - Secured eye terminal (First Revision) |
MED 10 |
| 5 |
IS/ISO 1834 : 1999 |
Short link chain for lifting purposes - General conditions of acceptance |
MED 14 |
| 6 |
IS 12375 : Part 5 : 1998 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 5 : Determination of Resistance to Static Load of Head and Neck Region of Stemmed Femoral Components |
MHD 2 |
| 7 |
IS 12375 : Part 3 : 1993 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 3 : Determination of endurance properties of stemmed femorel components without application of torsion |
MHD 2 |
| 8 |
IS 16635 : 2017 |
Geosynthetics - Wide - Width tensile test |
TXD 30 |
| 9 |
IS 16774 : 2018 |
Flexible cellular polymeric materials - Determination of hardness (Indentation Technique) |
PCD 29 |
| 10 |
IS 13360 : Part 5 : Sec 1 : 2018 |
Plastics - Methods of testing: Part 5 mechanical properties section 1 determination of tensile properties - General requirements (First Revision) |
PCD 27 |
| 11 |
IS/ISO 3076 : 2012 |
Round steel short link chains for general lifting purposes - Medium tolerance sling chains for chain slings - Grade 8 (First Revision) |
MED 14 |
| 12 |
IS 15060 : 2018 |
Geosynthetics – Tensile test for joint seams by wide-width strip method (first revision) |
TXD 30 |
| 13 |
IS 15554 : 2018 |
Sintered metal materials, excluding hardmetals - Tensile test pieces (First Revision) |
MTD 25 |
| 14 |
IS 7016 : Part 5 : 2019 |
Methods of Test for Coated and Treated Fabrics: Part 5 Rubber - or Plastics - Coated Fabrics - Determination of Coating Adhesion (Third Revision) |
TXD 33 |
| 15 |
IS 8085 : Part 8 : 2019 |
Methods of Test for Footwear Part 8 Delamination Resistance of Uppers |
CHD 19 |
| 16 |
IS 1367 : Part 6 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
| 17 |
IS 17419 : 2020 |
Metallic Materials - Ductility Testing - High Speed Compression Test for Porous and Cellular Metals |
MTD 3 |
| 18 |
IS 1969 : Part 1 : 2018 |
Textiles – Tensile properties of fabrics – Part 1 Determination of maximum force and elongation at maximum force using the strip method (fourth revision) |
TXD 1 |
| 19 |
IS 1969 : PART 2 : 2018 |
Textiles – Tensile properties of fabrics – Part 2 Determination of maximum force using the grab method (fourth revision) |
TXD 1 |
| 20 |
IS/ISO 13935 : Part 1 : 2014 |
Textiles - Seam tensile properties of fabrics and made-up textile articles Part 1 Determination of maximum force to seam rupture using the strip method (first revision) |
TXD 1 |
| 21 |
IS/ISO 13935 : Part 2 : 2014 |
Textiles - Seam tensile properties of fabrics and made-up textile articles Part 2 Determination of maximum force to seam rupture using the grab method (first revision) |
TXD 1 |
| 22 |
IS 17369 : Part 1 : 2020 |
Geotextiles and geotextile-related products – Strength of internal structural junctions Part 1 Geocells |
TXD 30 |
| 23 |
IS 1608 : Part 2 : 2020 |
Metallic Materials - Tensile Testing Part 2 Method of Test at Elevated Temperature ( Fourth Revision ) |
MTD 3 |
| 24 |
IS 17465 : 2020 |
Protective Clothing - Mechanical Properties - Determination of Resistance to Puncture |
TXD 32 |
| 25 |
IS 3779 : 1994 |
Textiles - Sheeting cloth,cotton khadi,bleached |
TXD 8 |
| 26 |
IS 15658 : 2021 |
Concrete Paving Blocks - Specification ( First Revision ) |
CED 5 |
| 27 |
IS/ISO 12619 : Part 13 : 2017 |
ROAD VEHICLES COMPRESSED GASEOUS HYDROGEN CGH2 AND HYDROGEN NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS RIGID FUEL LINE IN STAINLESS STEEL |
TED 26 |
| 28 |
IS 17328 : Part 1 : 2021 |
Nuclear fuel technology - Determination of uranium : Part 1 Determination of uranium in solutions, uranium hexafluoride and solids - Iron (II) reduction/potassium dichromate oxidation titrimetric method |
CHD 30 |
| 29 |
IS 15537 : 2004 |
Injection equipment for medical use - Ampoules for injectables |
MHD 12 |
| 30 |
IS 15941 : 2021 |
Jewellery and precious metals Determination of palladium in palladium alloys ICP-OES method using an internal standard element |
MTD 10 |
| 31 |
IS/ISO 17268 : 2020 |
Gaseous Hydrogen Land Vehicle Refuelling Connection Devices |
TED 26 |
| 32 |
IS 17417 : Part 1 : 2020 |
Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 1 Testing Systems |
MTD 3 |
| 33 |
IS 1608 : Part 3 : 2018 |
Metallic materials - Tensile testing: Part 3 method of test at low temperature |
MTD 3 |
| 34 |
IS 1608 : Part 1 : 2018 |
Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision) |
MTD 3 |
| 35 |
IS 15756 : 2007 |
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent |
MTD 3 |
| 36 |
IS 1367 : Part 14 : Sec 1 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision) |
PGD 37 |
| 37 |
IS 1367 : Part 14 : Sec 2 : 2018 |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision) |
PGD 37 |
