|
1 |
IS 10035 : 1993 |
Bronze powder for metallic filters - Specification (First Revision) |
Product Specification |
------ |
|
2 |
IS 10047 : 1981 |
Methods of testing refractory ramming masses |
Methods of tests |
------ |
|
3 |
IS 10113 : 1982 |
Recommended practice for calibration of emulsion for photographic photometry |
------ |
------ |
|
4 |
IS 10138 : Part 1 : 1992 |
Macroscopic Method For Determination Of Non-metallic Inclusion Content In Wrought Steels Part 1 Blue Fracture Test Method |
------ |
------ |
|
5 |
IS 10138 : Part 2 : 1983 |
Macroscopic Methods for Determination of Non-metallic Inclusion Contents in Wrought Steels - Part 2 : Step Machined Test Method |
------ |
------ |
|
6 |
IS 10138 : Part 3 : 1983 |
Macroscopic Methods for Determination of Non-metallic Inclusion Content in Wrought Steels - Part 3 : Magnetic Particle Inspection Method |
------ |
------ |
|
7 |
IS 10175 : Part 1 : 1993 |
Mechanical testing of metals -Modified erichsen cupping test - sheet and strip Pt 1 Thickness upto 2 mm |
Methods of tests |
------ |
|
8 |
IS 10343 : 1982 |
Specification For Carbon and Low Alloy Steel Investment Casting for General Applications |
------ |
------ |
|
9 |
IS 10441 : 1991 |
Metallic powders - determination of apparent density - oscillating funnel method |
------ |
------ |
|
10 |
IS/ISO 10474 : 1991 |
Steel and steel products - Inspection documents |
Others |
------ |
|
11 |
IS 10588 : 1983 |
Tables of Brinell hardness values for use in test made on flat surfaces |
------ |
------ |
|
12 |
IS 10607 : 1983 |
Specification for refractories for cement rotary kilns |
Product Specification |
------ |
|
13 |
IS 10623 : 1983 |
Drop weight tear test on ferritic steels and line pipe |
Methods of tests |
------ |
|
14 |
IS 10723 : 1983 |
Aluminium silicon bronze rods and bars |
------ |
------ |
|
15 |
IS 10724 : 1990 |
Acceptance standards for magnetic particle inspection of steel castings - Specification (First Revision) |
Code of Practice |
------ |
|
16 |
IS 10787 : 1984 |
Hot-rolled micro-alloyed steel plate, sheet and strip for manufacture of low pressure liquifiable gas cylinders |
------ |
------ |
|
17 |
IS 1079 : 2009 |
Hot Rolled Carbon Steel Sheet and Strip |
Code of Practice |
------ |
|
18 |
IS 10793 : 1983 |
Classification of imperfections in metallic fusion welds, with explanations |
Terminology |
------ |
|
19 |
IS 10816 : 1984 |
Methods of sampling zinc and lead concentrates |
Code of Practice |
------ |
|
20 |
IS 10818 : 1984 |
Specification for chromite for metallurgical industry |
Product Specification |
------ |
|
21 |
IS 10842 : 1984 |
Evaluation procedure for Y-groove weld crackability test in structural stee |
Code of Practice |
------ |
|
22 |
IS 10927 : Part 1 : 1984 |
Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces - Part 1 : HV 5 to HV 100 |
------ |
------ |
|
23 |
IS 10927 : Part 2 : 1984 |
Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces - Part 2 : Hv 0.2 to Less Than Hv 5 |
------ |
------ |
|
24 |
IS 10927 : Part 3 : 1991 |
Tables of Vickers Hardness Values for use in Tests Made on Flat Surfaces - Part 3 : Less than HV 0.2 |
------ |
------ |
|
25 |
IS 11040 : 1984 |
Dimensions for wrought aluminium and aluminium alloys, welded tube |
------ |
------ |
|
26 |
IS 1110 : 1990 |
Ferrosilicon - Specification (Fourth Revision) |
Product Specification |
------ |
|
27 |
IS B1110 : 1990 |
Ferrosilicon (Bi-lingual) |
Product Specification |
------ |
|
28 |
IS 1111 : 1964 |
Spiegeleisen (Revised) |
------ |
------ |
|
29 |
IS 11110 : 1984 |
Specification for copper - Lead powder |
Product Specification |
------ |
|
30 |
IS 11169 : Part 1 : 1984 |
Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels |
Product Specification |
------ |
|
31 |
IS 1137 : 1990 |
Thicknesses of Sheet and Diameter of Wire |
------ |
------ |
|
32 |
IS 11371 : 1985 |
Method for macroetch test of wrought steel products |
Methods of tests |
------ |
|
33 |
IS 1138 : 1958 |
Sizes of metal strip, sheet brass (round square) flats and plate for structural and general engineering purpose |
------ |
------ |
|
34 |
IS 11452 : 1985 |
Method of testing air - Setting refractory mortars |
Methods of tests |
------ |
|
35 |
IS 1149 : 1982 |
High tensile steel rivet bars for structural purposes |
------ |
------ |
|
36 |
IS 11513 : 2011 |
HOT-ROLLED CARBON STEEL STRIP FOR COLD ROLLING PURPOSES SPECIFICATION |
Code of Practice |
------ |
|
37 |
IS 11518 : 1985 |
Method for determination of (The Magnetization) coercivity in hardmetals |
Methods of tests |
------ |
|
38 |
IS 11520 : 1985 |
Method for metallographic sample preparation of hardmetals |
Code of Practice |
------ |
|
39 |
IS 11627 : 1986 |
Method for determination of apparent density of metallic powders by scott volumeter |
Methods of tests |
------ |
|
40 |
IS 1181 : 1967 |
Qualifying Tests For Metal Arc Welders (engaged In Welding Structures Other Than Pipes) |
------ |
------ |
|
41 |
IS 11945 : 1987 |
Charge Chrome |
Others |
------ |
|
42 |
IS/ISO 11951 : 1995 |
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel |
Code of Practice |
------ |
|
43 |
IS 11959 : 1987 |
Method for metallographic determination of microstructure in hardmetals |
Methods of tests |
------ |
|
44 |
IS 11960 : 1987 |
Method for metallographic determination of apparent porosity and uncombined carbon in hard metals |
Methods of tests |
------ |
|
45 |
IS 11999 : 2007 |
Method for Determination of Plastic Strain Ratio 'r' for Steel Metals |
Methods of tests |
------ |
|
46 |
IS 12037 : 1987 |
Specification for macrographic examination of steel by sulphur print (Baumann Method) |
Methods of tests |
------ |
|
47 |
IS 12117 : 1996 |
Norms for classification of steel foundries for quality assurance (First Revision) |
Others |
------ |
|
48 |
IS 12216 : 1987 |
Tantalum Carbide Powder |
------ |
------ |
|
49 |
IS 12217 : 1987 |
Niobium Carbide Powder |
------ |
------ |
|
50 |
IS 1230 : 1979 |
Cast iron rainwater pipes and fittings |
------ |
------ |
|
51 |
IS 12313 : 1988 |
Specification for hot - Dip terne coated carbon steel sheets |
Product Specification |
------ |
|
52 |
IS 12444 : 1988 |
Copper Wire Rods for Electrical Applications — Specification ( First Revision ) |
Product Specification |
------ |
|
53 |
IS 12514 : 1988 |
Method for torsional stress fatigue testing |
Methods of tests |
------ |
|
54 |
IS 12539 : 1988 |
Determination of total carbon in hardmetals by gravimetric method |
Methods of tests |
------ |
|
55 |
IS 12548 : 1988 |
Determination of insoluble (Free) carbon in hardmetals by gravimetric methods |
Methods of tests |
------ |
|
56 |
IS 12570 : 1988 |
Method for determination of dimensional changes associated with compacting and sintering of metallic powders (Exclud - Ing Powders For Hardmetals) |
Methods of tests |
------ |
|
57 |
IS 1279 : 1958 |
Electrically Welded Mild Steel Boilers And Superheater Tubes For Design Steam Temperatures Not Exceeding 155 Degree Centigrade Or 850 Degree Centigrade |
------ |
------ |
|
58 |
IS 1284 : 1975 |
Specification for wrought aluminium alloy bolt and screw stock (for general engineering purposes) (Second Revision) |
Product Specification |
------ |
|
59 |
IS 12871 : 2011 |
Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content (First Revision) |
Code of Practice |
------ |
|
60 |
IS 12872 : 2011 |
Metallic materials - Calibration of extensometers used in uniaxial testing (First Revision) |
Methods of tests |
------ |
|
61 |
IS 13015 : 1991 |
Steel products - Macroetch testing, inspection and rating - Specification |
Methods of tests |
------ |
|
62 |
IS/ISO/TS 13278 : 2011 |
Nanotechnologies Determination of Elemental Impurities in Samples of Carbon Nanotubes Using Inductively Coupled Plasma Mass Spectrometry |
Code of Practice |
------ |
|
63 |
IS 1338 : 1959 |
Certified Samples for Metallurgical Analysis |
------ |
------ |
|
64 |
IS 1339 : 1992 |
Lead and Lead Alloys for Sheathing of Electric Cables |
------ |
------ |
|
65 |
IS 13452 : Part 2 : 1992 |
Chemical analysis of ferrochromtum: Part 2 determination of silicon in low carbon ferrochromium by gravimetric method |
Methods of tests |
------ |
|
66 |
IS 13452 : Part 3 : 1992 |
Chemical Analysis of Ferro Chromium - Part-3 Determination of Phosphorous in low carbon Ferro chromium by Spectrophotometric method . |
Methods of tests |
------ |
|
67 |
IS 13452 : Part 4 : 1992 |
Chemical analysis of ferrochromium: Part 4 determination of total sulphur in low carbon and high carbon ferrochromium by direct combustion method |
Methods of tests |
------ |
|
68 |
IS 13452 : Part 5 : 2003 |
Chemical analysis of ferrochromium: Part 5 determination of chromium in high carbon ferrochromium/chargechrome by dichromatetitration (First Revision) |
Methods of tests |
------ |
|
69 |
IS 13452 : Part 6 : 1997 |
Chemical analysis of ferrochromium: Part 6 determination of chromium in low carbon ferrochromium |
Methods of tests |
------ |
|
70 |
IS 13452 : Part 7 : 2003 |
Chemical analysis of ferrochromium: Part 7 determination of phosphorus in ferrocliRomium/ chargechrome by alkalimetric method |
Methods of tests |
------ |
|
71 |
IS 13502 : 1992 |
Pig iron - Specification |
Product Specification |
------ |
|
72 |
IS 1357 : 1984 |
Printing Type Metal Ingots |
------ |
------ |
|
73 |
IS 13751 : 1993 |
Tungsten for hard metal industry - Specification |
Product Specification |
------ |
|
74 |
IS 13782 : 1993 |
Permeable sintered metal materials - Determination of fluid perme ability |
Methods of tests |
------ |
|
75 |
IS 13838 : 1993 |
Mechanical Testing Of Metals - Determination Of Poisson's Rates |
Code of Practice |
------ |
|
76 |
IS 13840 : Part 1 : 1993 |
Chemical analysis of ferrotitanium: Part 1 determination of carbon by the direct combustion gravimetric method |
Methods of tests |
------ |
|
77 |
IS 13840 : Part 2 : 1993 |
Chemical analysis of ferrotitanium: Part 2 determination of silicon by gravimetric method |
Methods of tests |
------ |
|
78 |
IS 13840 : Part 3 : 1993 |
Chemical analysis of ferrotitanium: Part 3 determination of titanium by cupferron (Gravimetric) method |
Methods of tests |
------ |
|
79 |
IS 13840 : Part 4 : 1998 |
Chemical analysis of ferrotitanium: Part 4 determination of aluminium by cupferron (Gravimetric) method |
Methods of tests |
------ |
|
80 |
IS 13840 : Part 5 : 1998 |
Chemical analysis of ferrotitanium: Part 5 determination of sulphur by direct combustion method |
Methods of tests |
------ |
|
81 |
IS 13840 : Part 6 : 1998 |
Chemical analysis of ferrotitanium: Part 6 determination of titanium by X-ray fluorescence spectrometric method |
Methods of tests |
------ |
|
82 |
IS 1385 : 1968 |
Phosphor bronze rods and bars, sheet and strip and wire |
------ |
------ |
|
83 |
IS 13923 : 1993 |
Lead seal - Specification |
Product Specification |
------ |
|
84 |
IS 13954 : 2001 |
Double Cold-reduced Electrolytic Tinplate Sheet |
------ |
------ |
|
85 |
IS 13955 : 1994 |
Double Cold Reduced Electrolytic Tinplate Coil For Subsequent Cutting Into Sheets |
------ |
------ |
|
86 |
IS 13982 : 1994 |
Zinc Alloy for Hot Dip Coatings- Zinc-5 Percent Aluminium- Mischmetal Alloy |
------ |
------ |
|
87 |
IS 14191 : 1996 |
Corrosion of metals and alloys - Classification of corrosivity of atmospheres |
Code of Practice |
------ |
|
88 |
IS 14297 : 1995 |
Corrosion of metals and alloys - Determination of corrosion rate of standard specimens for the evaluation of corrosivity methods of |
Methods of tests |
------ |
|
89 |
IS 14322 : 1996 |
Corrosion of metals and alloys - Corrosivity of atmosphere - Measurement of pollution - Methods |
Methods of tests |
------ |
|
90 |
IS 14374 : 1996 |
Refractories for chimney - Recommendation |
------ |
------ |
|
91 |
IS 1442 : 1964 |
Specification for precast reinforced concrete street lighting poles (First Revision) |
------ |
------ |
|
92 |
IS 14491 : 1997 |
Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification |
Product Specification |
------ |
|
93 |
IS 14644 : Part 2 : 1998 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 2 determination of cobalt content |
Methods of tests |
------ |
|
94 |
IS 14644 : Part 3 : 1998 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 3 determination of chromium content |
Methods of tests |
------ |
|
95 |
IS 14644 : Part 4 : 1998 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 4 determination of copper content |
Methods of tests |
------ |
|
96 |
IS 14644 : Part 5 : 1998 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 5 determination of iron content |
Methods of tests |
------ |
|
97 |
IS 14644 : Part 6 : 1998 |
Nickel alloys - Flame atomic absorption spectrometric analysis - Method: Part 6 determination of manganese content |
Methods of tests |
------ |
|
98 |
IS 14718 : 1999 |
Impact Index for Hot Briquetted Iron (HBI) |
------ |
------ |
|
99 |
IS 14741 : 1999 |
Colours of gold alloys - Definition, range of colours and designation |
Terminology |
------ |
|
100 |
IS 1493 : Part 7 : 1993 |
Method of chemical analysis of iron ores: Part 7 determination of lead and/or zinc content - Flame atomic absorption spectrometric method (First Revision) |
Methods of tests |
------ |
|
101 |
IS 1499 : 1977 |
Method for charpy impact test (U - Notch) for metals (First Revision) |
Methods of tests |
------ |
|
102 |
IS 1500 : 2005 |
Method for Brinell Hardness Test for Metallic Materials |
Methods of tests |
------ |
|
103 |
IS 1500 : Part 2 : 2013 |
Matallic Materials - Brinell Hardness Test Part 2 Verification and Calibration Testing Machines |
Methods of tests |
------ |
|
104 |
IS 1501 : 2002 |
Method For Vickers Hardness Test for Metallic Materials |
Methods of tests |
------ |
|
105 |
IS 1513 : 1980 |
Specification for wooden pattern equipment for foundries (Second Revision) |
Product Specification |
------ |
|
106 |
IS 1521 : 1972 |
Method for tensile testing of steel wire |
------ |
------ |
|
107 |
IS 1522 : 1998 |
Fireclay blocks for glass tank furnace - Specification (Second Revision) |
Product Specification |
------ |
|
108 |
IS 1524 : 1968 |
Specification for refractory sleeves (First Revision) |
Product Specification |
------ |
|
109 |
IS 1525 : 1968 |
Ladle refractories for steel plants |
Product Specification |
------ |
|
110 |
IS 1528 : Part 8 : 1974 |
Methods of Sampling and Physical Tests for Refractory Materials - Part VIII : Determination of Apparent Porosity |
------ |
------ |
|
111 |
IS 1528 : Part 10 : 1974 |
Methods of sampling and physical tests for refractory materials: Part 10 determination of size of refractory bricks (First Revision) |
Methods of tests |
------ |
|
112 |
IS 1528 : Part 11 : 1993 |
Methods of sampling and physical tests for refractory materials: Part 11 determination of warpage (Second Revision) |
Methods of tests |
------ |
|
113 |
IS 1528 : Part 20 : 1993 |
Methods of sampling and physical tests for refractory materials - Part 20 : determination of modulus of rupture at elevated temperature |
Methods of tests |
------ |
|
114 |
IS 1529 : 1971 |
Specification for blast furnace refractories for steel plants |
Product Specification |
------ |
|
115 |
IS 15326 : Part 2 : 2017 |
Quality requirements for fusion welding of metallic materials: Part 2 comprehensive quality requirements (First Revision) |
Code of Practice |
------ |
|
116 |
IS 15326 : Part 3 : 2017 |
Quality requirements for fusion welding of metallic materials: Part 3 standard quality requirements (First Revision) |
Code of Practice |
------ |
|
117 |
IS 15326 : Part 4 : 2017 |
Quality requirements for fusion welding of metallic materials: Part 4 elementary quality requirements (First Revision) |
Code of Practice |
------ |
|
118 |
IS 15327 : 2018 |
Welding coordination - Tasks and responsibilities (First Revision) |
Code of Practice |
------ |
|
119 |
IS 1546 : 1960 |
Method for determination of arsenic in iron and steel |
------ |
------ |
|
120 |
IS 1550 : 1967 |
Copper sheet and strip for utensils and for general purposes |
------ |
------ |
|
121 |
IS 15574 : 2005 |
Sintered Metal Materials, excluding Hard metals - Unnotched Impact Test Piece |
Methods of tests |
------ |
|
122 |
IS 15728 : 2006 |
Welding - Friction welding of metallic materials |
Code of Practice |
------ |
|
123 |
IS 15756 : 2007 |
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent |
Methods of tests |
------ |
|
124 |
IS 15839 : 2009 |
Determination of ferrite content in austenitic stainless steel castings |
Methods of tests |
------ |
|
125 |
IS 1586 : 2000 |
Method for Rockwell Hardness Test for Metallic Material (Scales A-B-C-D-E-F-G-H-K 15N, 30N, 45N, 15T, 30T and 45T) |
Methods of tests |
------ |
|
126 |
IS 1586 : Part 3 : 2012 |
Metallic materials - Rockwell hardness test: Part 3 calibration of reference blocks (Scales, A, B, C, D, E, F, G, H, K, N, T) (Fourth Revision) |
Methods of tests |
------ |
|
127 |
IS 15895 : 2011 |
High Alumina Refractory Cement |
Code of Practice |
------ |
|
128 |
IS 15940 : 2011 |
Jewellery - Determination of platinum in platinum jewellery alloys - Inductively coupled plasma (ICP) solution - Spectrometric method using yttrium as internal standard element |
Methods of tests |
------ |
|
129 |
IS 15941 : 2011 |
Jewellery - Determination of palladium in palladium jewellery alloys - Inductively coupled plasma (ICP) solution - Spectrometric method using yttrium as internal standard element |
Methods of tests |
------ |
|
130 |
IS/ISO 15968 : 2000 |
Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI) |
Methods of tests |
------ |
|
131 |
IS 1599 : 2019 |
Metallic materials - Bend test (Fourth Revision) |
Methods of tests |
------ |
|
132 |
IS 16003 : 2012 |
Specification and qualification of welding procedures for metallic materials - General rules |
Code of Practice |
------ |
|
133 |
IS 1608 : 2005 |
Mechanical testing of metals - Tensile Testing |
Methods of tests |
------ |
|
134 |
IS 1608 : Part 1 : 2018 |
Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision) |
Methods of tests |
------ |
|
135 |
IS/ISO 16124 : 2004 |
Steel wire rod - Dimensions and tolerances |
Dimensions |
------ |
|
136 |
IS/ISO 16160 : 2005 |
Continuously hot - Rolled steel sheet products - Dimensional and shape tolerances |
Dimensions |
------ |
|
137 |
IS 16411 : 2017 |
Nanotechnologies - Characterization of single - Wall carbon nanotubes using thermogravimetric analysis |
Methods of tests |
------ |
|
138 |
IS 16412 : 2017 |
Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors |
Dimensions |
------ |
|
139 |
IS 16413 : 2017 |
Nanotechnologies - Characterization of single - Wall carbon nanotubes using near infrared photoluminescence spectroscopy |
Methods of tests |
------ |
|
140 |
IS 1655 : 1991 |
Metallic materials - Zinc alloys - Code of practice for manufacture of pressure die castings (Second Revision) |
Code of Practice |
------ |
|
141 |
IS 16586 : 2016 |
Magnetic materials - Methods of measurement of the magnetic properties of fe-based amorphous strip by means of a single sheet tester |
Methods of tests |
------ |
|
142 |
IS 1663 : 1972 |
Method for tensile testing of steel sheet and strip of thickness 0.5 mm to 3 mm |
------ |
------ |
|
143 |
IS 1663 : Part 2 : 1962 |
Tensile testing of steel sheet and strip: Part 2 Steel, sheet and strip of thickness above 3 mm |
------ |
------ |
|
144 |
IS 16681 : Part 1 : 2018 |
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume: Part 1 requirements for testing and marking of separation efficiency |
Safety Standard |
------ |
|
145 |
IS 16842 : 2018 |
Metallic materials - Fatigue testing - Fatigue crack growth method |
Methods of tests |
------ |
|
146 |
IS 16900 : 2019 |
Jewellery — Determination of Silver in 999‰ Silver Jewellery Alloys — Difference Method Using ICP-OES |
Methods of tests |
------ |
|
147 |
IS 16901 : 2019 |
Jewellery - Determination of precious metals in 99 % gold, platinum and palladium jewellery alloys - Difference method using ICP - OES |
Methods of tests |
------ |
|
148 |
IS 1692 : 1974 |
Method for simple bend testing of steel sheet and strip less than 3 mm thick |
------ |
------ |
|
149 |
IS 17003 : Part 6 : 2018 |
Nanotechnologies - Vocabulary: Part 6 Nano - Object characterization |
Terminology |
------ |
|
150 |
IS 17069 : 2019 |
Method for Determination of Thermal Conductivity of Dense as Well as Insulating Fired Refractories, Refractory Monolithics and Precast Prefired ( PCPF ) Shapes |
Methods of tests |
------ |
|
151 |
IS 17143 : 2019 |
Metallic materials - Torque - Controlled fatigue testing |
Methods of tests |
------ |
|
152 |
IS 17146 : Part 1 : 2019 |
Metallic materials - Sheet and strip - Determination of forming - Limit curves: Part 1 measurement and application of forming - Limit diagrams in the press shop |
Methods of tests |
------ |
|
153 |
IS 17146 : Part 2 : 2019 |
Metallic materials - Sheet and strip - Determination of forming - Limit curves: Part 2 determination of forming - Limit curves in the laboratory |
Methods of tests |
------ |
|
154 |
IS 17151 : 2019 |
Metallic materials - Unified method of test for the determination of quasistatic fracture toughness |
Methods of tests |
------ |
|
155 |
IS 1716 : 1985 |
Method for reverse bend test for metallic wire (Second Revision) |
Methods of tests |
------ |
|
156 |
IS 17415 : 2020 |
Metallic Materials - Torsion Test at Ambient Temperature |
Methods of tests |
------ |
|
157 |
IS 1752 : 1973 |
Specification for coal dust for use in cast iron foundry (Second Revision) |
Product Specification |
------ |
|
158 |
IS 1754 : 2002 |
Method for verification of vickers hardness testing machines (Third Revision) |
Methods of tests |
------ |
|
159 |
IS 1754 : Part 1 : 1986 |
Method for Verification of Vickers Hardness Testing Machines: Part I HV 0.2 to HV 100 |
------ |
------ |
|
160 |
IS 1754 : Part 2 : 1986 |
Method for Verification of Vickers Hardness Testing Machines: Part 2 Less than HV 0.2 |
------ |
------ |
|
161 |
IS 1756 : 1974 |
Methods of modified Erichsen cupping test for steel sheet and strip |
------ |
------ |
|
162 |
IS 1757 : PART 1 : 2014 |
Metallic Materials Charpy Pendulum Impact Test Part 1 Test Method |
Code of Practice |
------ |
|
163 |
IS 1772 : 1973 |
Specification for electroplated coatings of copper (First Revision) |
Product Specification |
------ |
|
164 |
IS 1789 : 1961 |
Method for brinell hardness test for grey cast iron |
------ |
------ |
|
165 |
IS 1790 : 1961 |
Method for brinell hardness test for light metals and their alloys |
------ |
------ |
|
166 |
IS 1810 : 1961 |
Method for vickers hardness test for light metals and their alloys |
------ |
------ |
|
167 |
IS 1816 : 1979 |
Method for tensile test for light metals and their alloys |
------ |
------ |
|
168 |
IS 1828 : Part 1 : 2015 |
Metallic materials - Verification of static uniaxial testing machines: Part 1 tension/compression testing machines - Verification and calibration of the force - Measuring system (Fourth Revision) |
Methods of tests |
------ |
|
169 |
IS 1841 : 1978 |
EC grade aluminium rod produced by rolling |
------ |
------ |
|
170 |
IS 1847 : 1961 |
Specification for fanlight pivots |
------ |
------ |
|
171 |
IS 1870 : 1965 |
Comparison of Indian and overseas standards for wrought steels for general engineering purposes |
Others |
------ |
|
172 |
IS 1894 : 1972 |
Criteria for earthquake resistant design of structures (Fourth Revision) |
------ |
------ |
|
173 |
IS 1914 : Part 1 to 4 : 1982 |
Carbon Steel Boiler Tubes and Superheater Tubes |
------ |
------ |
|
174 |
IS 192 : 1956 |
Silver Solder |
------ |
------ |
|
175 |
IS 194 : 1950 |
Recommendations for refractories for railways |
------ |
------ |
|
176 |
IS 1956 : Part 5 : 1976 |
Glossary of terms relating to iron and steel: Part V bright steel bar and steel wire (First Revision) |
Terminology |
------ |
|
177 |
IS 1972 : 1989 |
Copper plate, sheet and strip for industrial purposes |
------ |
------ |
|
178 |
IS 1977 : 1996 |
Low Tensile Structural Steels |
------ |
------ |
|
179 |
IS 1978 : 1982 |
Line Pipe |
------ |
------ |
|
180 |
IS 1979 : 1985 |
High Test Line Pipe |
------ |
------ |
|
181 |
IS 1993 : 2006 |
Cold-reduced Electrolytic Tinplate |
Methods of tests |
------ |
|
182 |
SP 2 : 1982 |
Comparison of Indian and Overseas Basic Sizes for Sheet and Wire |
------ |
------ |
|
183 |
IS 20 : 1977 |
Cast Aluminium and Aluminium Alloys for Manufacture of Utensils |
------ |
------ |
|
184 |
IS 2017 : 1967 |
Methods of chemical analysis of metallic manganese |
Methods of tests |
------ |
|
185 |
IS 2040 : 1962 |
Steel Bars For Staus |
------ |
------ |
|
186 |
IS 2045 : 1962 |
Natural silimanite blocks for glass melting tanks furnaces |
------ |
------ |
|
187 |
IS 2073 : 1970 |
Carbon steel black bars for production of machined parts for general engineering purposes |
------ |
------ |
|
188 |
IS 2078 : 1979 |
Method for tensile testing of grey cast iron |
------ |
------ |
|
189 |
IS 2107 : 1977 |
Whiteheart malleable iron castings |
------ |
------ |
|
190 |
IS 2108 : 1977 |
Blackheart Malleable Iron Castings |
------ |
------ |
|
191 |
IS 22 : 1950 |
98 Percent aluminium notched bars and ingots for remelting purposes (tentative) |
------ |
------ |
|
192 |
IS 223 : 1950 |
Tensile Testing Of Metals (ferrous) |
------ |
------ |
|
193 |
IS 224 : 1979 |
Foundry pig iron for general purposes |
------ |
------ |
|
194 |
IS 2246 : 1963 |
Methods of sampling of fluorspar (Flourite) |
Code of Practice |
------ |
|
195 |
IS 225 : 1969 |
Pig iron (charcoal) |
------ |
------ |
|
196 |
IS 226 : 1975 |
Structural steel (Standard quality) |
------ |
------ |
|
197 |
IS 227 : 1954 |
Malleable iron castings |
------ |
------ |
|
198 |
IS 2278 : 1963 |
Fine gold bar, sheet, wire, granules and token (LAGDI or MOHUR) |
------ |
------ |
|
199 |
IS 228 : 1959 |
Methods of chemical analysis of pig iron, cast iron and plain carbon and low alloy steel |
------ |
------ |
|
200 |
IS 228 : Part 20 : 2003 |
Methods for chemical analysis of steels: Part 20 determination of carbon and sulphur by infra red absorption method (For Carbon 0.005 To 2 Percent And Sulphur 0.001 To 0.35 Percent) (Second Revision) |
Methods of tests |
------ |
|
201 |
IS 2281 : 2005 |
Method for Verification of Brinell Hardness Testing Machines |
Methods of tests |
------ |
|
202 |
IS 2313 : 1963 |
Phosphor Copper Ingot |
------ |
------ |
|
203 |
IS 2330 : 2011 |
Metallic materials - Tube - Flanging test (Second Revision) |
Methods of tests |
------ |
|
204 |
IS 2348 : 1963 |
Method for drift expanding test on copper and copper alloy tubes |
------ |
------ |
|
205 |
IS 2371 : 1973 |
Solid drawn copper alloy tubes for condensers, evaporators, heaters and cooler tubes using saline hard water |
------ |
------ |
|
206 |
IS 2391 : 1970 |
Specification for foundry nickel (First Revision) |
Product Specification |
------ |
|
207 |
IS 24 : 1956 |
Brazing Solder |
------ |
------ |
|
208 |
IS 2450 : 1963 |
Recommended practice for plating on aluminium and its alloys |
Code of Practice |
------ |
|
209 |
IS 2456 : 1963 |
Brass Strip For Pen Nibs |
------ |
------ |
|
210 |
IS 2484 : 1979 |
Dimensions for steel tubes for bicycle purposes |
------ |
------ |
|
211 |
IS 2517 : 1963 |
Bright bars for threaded components |
------ |
------ |
|
212 |
IS 2549 : 1994 |
Code of classification of processed ferrous scrap (First Revision) |
Others |
------ |
|
213 |
IS 2598 : 1966 |
Safety code for industrial radiographic practice |
------ |
------ |
|
214 |
IS 26 : 1992 |
Tin ingot - Specification (Fourth Revision) |
Product Specification |
------ |
|
215 |
IS 2605 : 1985 |
Specification for zinc anodes for electroplating (First Revision) |
Product Specification |
------ |
|
216 |
IS 2640 : 1977 |
Pearlitic Malleable Iron Castings |
------ |
------ |
|
217 |
IS 2654 : 1977 |
Method for tensile testing of copper and copper alloys |
------ |
------ |
|
218 |
IS 2655 : 1964 |
Method for tensile testing of copper and copper alloy tubes |
------ |
------ |
|
219 |
IS 2656 : 1964 |
Method for tensile testing of copper and copper alloy wires |
------ |
------ |
|
220 |
IS 2657 : 1964 |
Method for tensile testing of aluminium and aluminium alloy tube |
------ |
------ |
|
221 |
IS 2658 : 1964 |
Method for tensile testing for aluminium and aluminium alloy wire |
------ |
------ |
|
222 |
IS 2680 : 1964 |
Filler rods and wire for inert gas tungsten arc welding |
------ |
------ |
|
223 |
IS 2756 : 1965 |
Method for estimating the average grain size of wrought copper and copper base alloys |
------ |
------ |
|
224 |
IS 277 : 2003 |
Galvanized Steel Sheets (Plain and Corrugated) |
Methods of tests |
------ |
|
225 |
IS 2782 : 1964 |
Specification for primary nickel |
Product Specification |
------ |
|
226 |
IS 2841 : 1978 |
Pig iron for special purposes |
------ |
------ |
|
227 |
IS 2842 : 1980 |
Basic pig iron for steel marking purposes |
------ |
------ |
|
228 |
IS 2853 : 1964 |
Methods of determining austenitic grain size in steel |
------ |
------ |
|
229 |
IS 2866 : 1968 |
Method for Vickers hardness test for copper and copper alloys |
------ |
------ |
|
230 |
IS 29 : 1950 |
Aluminium sheet and coils for aircraft purpose |
------ |
------ |
|
231 |
IS 2983 : 1971 |
Recommended practice for hot tinning of brassware |
------ |
------ |
|
232 |
IS 30 : 1953 |
Aluminium coated high-tensile aluminium alloy sheets and coils for aircraft purposes |
------ |
------ |
|
233 |
IS 3012 : 1985 |
Chrome Manganese — Specifications ( First Revision ) |
Product Specification |
------ |
|
234 |
IS 3021 : 1975 |
Bentonite for use in foundries |
------ |
------ |
|
235 |
IS 3024 : 2006 |
Grain orinted electrical steel sheets and strips |
Product Specification |
------ |
|
236 |
IS 3039 : 1988 |
Specification for structural steel for construction of hulls of ships (Second Revision) |
Product Specification |
------ |
|
237 |
IS 3054 : 1965 |
Method for Brinell hardness test for copper and copper alloys |
------ |
------ |
|
238 |
IS 3057 : 1965 |
Copper sheets for photo process engravings |
------ |
------ |
|
239 |
IS 31 : 1950 |
Aluminium manganese alloy sheets and coils |
------ |
------ |
|
240 |
IS 3168 : 1981 |
Specification for brass strip and foil for deep drawing (First Revision) |
Product Specification |
------ |
|
241 |
IS/ISO 3183 : 2007 |
Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems (Amalgamating IS1978:1982 and IS1979:1985) |
Code of Practice |
------ |
|
242 |
IS/ISO 3183 : 2012 |
Petroleum and Natural Gas Industries — Steel Pipe for Pipeline Transportation Systems ( First Revision ) |
Product Specification |
------ |
|
243 |
IS 3260 : 1965 |
Method For Bend Test For Copper And Copper Alloys |
------ |
------ |
|
244 |
IS 3285 : 1965 |
Copper Strip For Electrical Purposes Withdrawn Or Rolled Edged (above 150 Mm Width) |
------ |
------ |
|
245 |
IS 3332 : 1965 |
Nickel silver strip and foil for telecommunication purposes |
------ |
------ |
|
246 |
IS 3388 : 1965 |
Method for wrapping test for copper and copper alloy wire |
------ |
------ |
|
247 |
IS 3408 : 1965 |
Method for non-interrupted creep testing of steel at elevated temperature |
------ |
------ |
|
248 |
IS 3409 : 1965 |
Method for creep stress rupture testing of steel of elevated temperature |
------ |
------ |
|
249 |
IS 3422 : 1966 |
Code of practice for packaging of steel and steel products for export purposes |
------ |
------ |
|
250 |
IS 3424 : 1985 |
Stainless Steel Table Utensils |
------ |
------ |
|
251 |
IS 3435 : 1968 |
99 percent secondary aluminium notched bars and ingots for remelting for aircraft purposes |
------ |
------ |
|
252 |
IS 3486 : 1966 |
Cast Iron Spigot And Socket Drain Pipes |
------ |
------ |
|
253 |
IS 3487 : 1994 |
Copper-cold Rolled Strip And Foil For Gaskets, Washers And Eyelets |
------ |
------ |
|
254 |
IS 3488 : 1980 |
Brass Bars, Rods And Sections Suitable For Forging |
------ |
------ |
|
255 |
IS 3503 : 1966 |
Steel for marine boilers, pressure vessels and welded machinery structures |
------ |
------ |
|
256 |
IS 3531 : 1997 |
Glossary of terms relating to corrosion of metals (Second Revision) |
Terminology |
------ |
|
257 |
IS 3541 : 1981 |
Code of practice for manufacture of 23.3 and lower carat gold alloys |
------ |
------ |
|
258 |
IS 3600 : Part 1 : 1985 |
Method of testing fusion welded joints and weld metal in steel: Part 1 cruciform fillet weld tensile test (Second RwCslan |
Methods of tests |
------ |
|
259 |
IS 3600 : Part 2 : 1985 |
Method of testing fusion welded joints and weld metal in steel: Part 2 beam impact (Charpy V - Notch) test (Second Revision) |
Methods of tests |
------ |
|
260 |
IS 3600 : Part 6 : 1983 |
Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 6 Transverse side bend test on butt welds |
Methods of tests |
------ |
|
261 |
IS 3600 : Part 7 : 1985 |
Method of testing fusion welded joints and weld metal in steel: Part 7 longitudinal root and face bend test on butt welds (Second Revision) |
Methods of tests |
------ |
|
262 |
IS 3600 : Part 9 : 1985 |
Method of testing fusion welded joints and weld metal in steel: Part 9 macro and micro examination |
Methods of tests |
------ |
|
263 |
IS 3609 : 1966 |
Chrome Molybdenum Steel, Seamless, Boiler And Superheater Tubes |
------ |
------ |
|
264 |
IS 3613 : 1974 |
Acceptance tests for wire flux combination for submerged arc welding |
Methods of tests |
------ |
|
265 |
IS 3656 : 1968 |
Code of recommended practice for mechanical polishing of metals for electroplating |
Code of Practice |
------ |
|
266 |
IS 3666 : 1966 |
Tests for foundry core oils |
------ |
------ |
|
267 |
IS 3684 : 1966 |
Metals for casting moveable types |
------ |
------ |
|
268 |
SP 37 : Part 3 : 1987 |
Handbook for refractories: Part 3 refractories for cement kiln system |
Others |
------ |
|
269 |
IS 3703 : 2004 |
Recommended practice for magnetic particle flaw detection (Second Revision) |
Methods of tests |
------ |
|
270 |
IS 3717 : 1977 |
Specification for refined secondary lead (First Revision) |
Product Specification |
------ |
|
271 |
IS 373 : 1952 |
Manganese Ore Metallurgical Grade (tentative) |
------ |
------ |
|
272 |
IS 3747 : 1982 |
Hot rolled steel plates and sheets for flanging and pressing |
------ |
------ |
|
273 |
IS 3748 : 1990 |
Tool and die steels - Specification (Second Revision) |
Product Specification |
------ |
|
274 |
IS 3749 : 1978 |
Tool and die steels for cold work |
------ |
------ |
|
275 |
IS 3754 : 1988 |
Method for calibration of standardized blocks to be used for Rockwell hardness testing machines(Scales A-B-C-D-E-F-G-H-K) |
------ |
------ |
|
276 |
IS 3766 : 1977 |
Method for calibration of pendulum impact testing machines for testing metals (First Revision) |
Code of Practice |
------ |
|
277 |
IS 3803 : Part 1 : 1989 |
Steel - Conversion of elongation values: Part 1 carbon and low alloy steels (Second Revision) |
Dimensions |
------ |
|
278 |
IS 3803 : Part 2 : 1989 |
Steel - Conversion of elongation values: Part 2 austenitic steels (Second Revision) |
Dimensions |
------ |
|
279 |
IS 3804 : 1988 |
Method for calibration of Rockwell hardness testing machines (Scales A-B-C-D-E-F-G-H-K) |
------ |
------ |
|
280 |
IS 3835 : 1966 |
Aluminized Steel Core Wire For Aluminium Conductors (acsr) |
------ |
------ |
|
281 |
IS 3848 : 1981 |
Method for end quench test for hardenability of steel (First Revision) |
Methods of tests |
------ |
|
282 |
IS 3896 : Part 1 : 1978 |
Comparison of Indian and Overseas Standards for Iron Castings - Part I : Grey Iron Castings |
Terminology |
------ |
|
283 |
IS 3896 : Part 2 : 1985 |
Comparison of Indian and Overseas Standards for Iron Castings - Part 2 : Spheroidal or Nodular Graphite Iron Castings |
Terminology |
------ |
|
284 |
IS 3945 : 1966 |
Steel for naval purposes |
------ |
------ |
|
285 |
IS 3989 : 1984 |
Centrifugally cast (spun) iron spigot and socket soil,waste, ventilation and rainwater pipes, fittings, and accessories |
Methods of tests |
------ |
|
286 |
IS 4030 : 1973 |
Cold rolled carbon steel strip for general engineering purposes |
------ |
------ |
|
287 |
IS 4077 : 1967 |
Copper-nickel Shot |
------ |
------ |
|
288 |
IS 4132 : 2005 |
Method for calibration of standardized blocks to be used for Brinell hardness teing machines |
Code of Practice |
------ |
|
289 |
IS 4133 : 2002 |
Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines |
Methods of tests |
------ |
|
290 |
IS 4133 : Part 1 : 1986 |
Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines - Part 1 : HV 0.2 to HV 100 |
Code of Practice |
------ |
|
291 |
IS 4140 : 1978 |
Demolition of buildings - Code of safety (Second Revision) |
------ |
------ |
|
292 |
IS 4156 : 1967 |
Methods for sampling of barytes |
Code of Practice |
------ |
|
293 |
IS 4163 : 2004 |
Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams (Third Revision) |
Methods of tests |
------ |
|
294 |
IS 4168 : 1967 |
Method for wrapping test of aluminium and aluminium alloy wire |
------ |
------ |
|
295 |
IS 4176 : 1967 |
Method for simple torsion test of aluminium and aluminium alloy wire |
------ |
------ |
|
296 |
IS 4177 : 1967 |
Method for flattening test of aluminium and aluminium alloy tubes |
------ |
------ |
|
297 |
IS 4225 : 2004 |
Recommended practice for straight beam ultrasonic testing of steel plates (Second Revision) |
Methods of tests |
------ |
|
298 |
IS 429 : 1954 |
Methods for testing weight and uniformity of coatings on galvanized iron and steel wires and steel sheets |
------ |
------ |
|
299 |
IS 4310 : 1967 |
Weldable Steel Pipe Fittings For Marine Purposes |
------ |
------ |
|
300 |
IS 4331 : Part 1 : 1980 |
Comparison of Indian and overseas standards for steel castings: Part 1 Steel castings for general engineering purposes |
------ |
------ |
|
301 |
IS 4369 : 1967 |
Steel Bars For Forgings |
------ |
------ |
|
302 |
IS 4409 : 1973 |
Specification for ferronickel (First Revision) |
Product Specification |
------ |
|
303 |
IS 4430 : 1979 |
Specification for mould steels (First Revision) |
Product Specification |
------ |
|
304 |
IS 4454 : Part 3 : 1975 |
Part 3 Oil hardened and tempered steel wiresalloyed |
------ |
------ |
|
305 |
IS 4476 : 1975 |
Crane-suspended hand-operated geared ladles for steel foundries |
------ |
------ |
|
306 |
IS 4516 : 1968 |
Elliptical Mild Steel Tubes |
------ |
------ |
|
307 |
IS 4598 : 1968 |
Method for simple bend test for aluminium and aluminium alloy sheet and strip of thickness between 0.2 mm and 7 mm |
------ |
------ |
|
308 |
IS 4599 : 1968 |
Method For Drift Expanding Test On Aluminium And Aluminium Alloy Tubes |
------ |
------ |
|
309 |
IS 4713 : 1968 |
Method for determination of lower yield stress, proof stress and proving test for steel at elevated temperatures |
------ |
------ |
|
310 |
IS 4748 : 2009 |
Steels - Micrographic determination of the apparent grain size (Second Revision) |
Methods of tests |
------ |
|
311 |
IS 4801 : 1980 |
Specification for chemically - Bonded magnesite - Chrome refractories for roof lining (First Revision) |
Product Specification |
------ |
|
312 |
IS 4824 : 2006 |
Bead wire for tyres - Specification (Second Revision) |
Product Specification |
------ |
|
313 |
IS 4826 : 1979 |
Specification for hot - Dipped galvanized coatings on round steel wires (First Revision) |
Process Specification |
------ |
|
314 |
IS 4827 : 1983 |
Electroplated coatings of nickel and chromium on copper and copper alloys |
------ |
------ |
|
315 |
IS 4828 : 1983 |
Specification for ventilator chains |
------ |
------ |
|
316 |
IS 4840 : 2006 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall Flowmeter) (Second Revision) |
Methods of tests |
------ |
|
317 |
IS 4841 : 1982 |
Method for determination of density of sintered metallic materials (First Revision) |
Methods of tests |
------ |
|
318 |
IS 4843 : 1968 |
Code for designation of ferrous castings |
Code of Practice |
------ |
|
319 |
IS 4848 : 1981 |
Method for determination of apparent density of free flowing powders for powder metallurgical purposes (First Revision) |
Methods of tests |
------ |
|
320 |
IS 485 : 1954 |
Methods of sampling and testing of refractory materials (tentative) |
------ |
------ |
|
321 |
IS 4855 : 1968 |
Bright steel bars for machining |
------ |
------ |
|
322 |
IS 4901 : 1968 |
Code Of Practice Forgings |
------ |
------ |
|
323 |
IS 4922 : 1968 |
Seamless steel tubes (suitable for welding) for aircraft purposes |
------ |
------ |
|
324 |
IS 4923 : 1997 |
Hollow steel sections for structural use - Specification |
Methods of tests |
------ |
|
325 |
IS 4942 : 1983 |
Electroplated coatings of nickel and chromium on aluminium and aluminium alloys |
------ |
------ |
|
326 |
IS 497 : 1953 |
Tensile testing of metals (non-ferrous) |
------ |
------ |
|
327 |
IS 4972 : 1968 |
Specification for resistance spot - Welding electrodes |
Product Specification |
------ |
|
328 |
IS 5020 : 1969 |
Hematite Pig Iron |
------ |
------ |
|
329 |
IS 5021 : 1969 |
Acid-resisting High-silica Pig Iron |
------ |
------ |
|
330 |
IS 503 : 1963 |
Alloy Austenitic Manganese Steel Castings |
------ |
------ |
|
331 |
IS 5071 : 1969 |
Method for flattening test for copper and copper alloy tubes of circular section |
------ |
------ |
|
332 |
IS 5072 : 1988 |
Method for Rockwell Superficial Hardness Test (scale 15n, 30n, 45n, 15t, 30t and 45t) |
------ |
------ |
|
333 |
IS 5073 : 1988 |
Method for verification of Rockwell superficial hardness testing machines (Scales 15N,30N,45N, 15T,30T and 45T) |
------ |
------ |
|
334 |
IS 5074 : 1969 |
Method of axial load fatigue testing of steel |
Methods of tests |
------ |
|
335 |
IS 5075 : 1985 |
Method of rotating bar bending fatigue testing of metals (First Revision) |
Methods of tests |
------ |
|
336 |
IS 5076 : 1988 |
Method for calibration of standardized blocks to be used for rockwell superficial hardness testing machines (Scales 15N,30N,45N,15T,30T and 45T) |
------ |
------ |
|
337 |
IS 511 : 1962 |
Tamarind kernel powder for uing of weight, thickness and uniformity of coating on galvanised articles other than wires and sheets |
------ |
------ |
|
338 |
IS 513 : 2008 |
Cold reduced low carbon steel sheets and strips |
Methods of tests |
------ |
|
339 |
IS 5239 : 1969 |
Wire rod for the manufacture of aluminized steel core wire for aluminium conductors |
------ |
------ |
|
340 |
IS 5243 : 1969 |
Tin Coated Finish For Cooking Utensils |
------ |
------ |
|
341 |
IS 5272 : 1969 |
Carbon steel sheets for integral coaches |
------ |
------ |
|
342 |
IS 5274 : 1969 |
Recommended practice for hot dip tinning of plain carbon steels |
------ |
------ |
|
343 |
IS 5320 : 1969 |
Fine Silver Ingot |
------ |
------ |
|
344 |
IS 5358 : 1969 |
Hot Dip Galvanized Coatings On Fasteners |
------ |
------ |
|
345 |
IS 5432 : 1982 |
Glossary of terms relating to powder metallurgy (First Revision) |
Terminology |
------ |
|
346 |
IS 5461 : 1984 |
Method for sieve analysis of metal powders (First Revision) |
Methods of tests |
------ |
|
347 |
IS 5462 : 1969 |
Colour code for identification of covered electrodes and metal arc welding |
------ |
------ |
|
348 |
IS 5483 : 1969 |
Method for determination of specific gravity of iron ores, pellets and sinters |
------ |
------ |
|
349 |
IS 5489 : 1975 |
Specification for carburizing steels for use in bearing industry (First Revision) |
Product Specification |
------ |
|
350 |
IS 5494 : 1969 |
Leaded brass sheets and strips for use in manufacture of tubewell strainers |
------ |
------ |
|
351 |
IS 5619 : 1970 |
Recommendations for fatigue testing of metals |
------ |
------ |
|
352 |
IS 5633 : 1973 |
Vanadium Pentoxide — Specification (First Revision) |
Product Specification |
------ |
|
353 |
IS 5644 : Part 4 : 2018 |
Metallic powders - Determination of oxygen content by reduction methods: Part 4 total oxygen by reduction - Extraction (Fourth Revision) |
Methods of tests |
------ |
|
354 |
IS 5824 : 1970 |
Specification for lancets for use in foundries |
Product Specification |
------ |
|
355 |
IS 5842 : 1986 |
Method for measuring bulk density of iron oxides: lump ores, sinter and pellets (First Revision) |
Methods of tests |
------ |
|
356 |
IS 5843 : 1970 |
Method of measuring the bulk density of iron ore and iron ore agglomerates including sinters in a large container (applicable for size over 40mm) |
------ |
------ |
|
357 |
IS 5850 : 1970 |
Specification for star (Triangular) cutters for use in foundries |
Product Specification |
------ |
|
358 |
IS 5856 : 2017 |
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (Second Revision) |
Others |
------ |
|
359 |
IS 5902 : 1970 |
Aluminium and aluminium alloy rivet stock for cold forged rivets for aircraft purposes (SEE IS 8513, IS 8514, IS 8515, IS 8956, IS 8937 and 9387) |
------ |
------ |
|
360 |
IS 5909 : 1970 |
Aluminium and aluminium manganese alloy sheet and strip for aircraft purposes |
------ |
------ |
|
361 |
IS 5929 : 1970 |
Inspection and testing procedure for circular steel tubes for aircraft purposes |
------ |
------ |
|
362 |
IS 597 : 1978 |
Pack-rolled tinplate and pack rolled black plate |
------ |
------ |
|
363 |
IS 5986 : 2011 |
Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes |
Product Specification |
------ |
|
364 |
IS 5988 : 1970 |
Specification for spring dowel sleeves (Light And Heavy Patterns) for use in foundries |
Product Specification |
------ |
|
365 |
IS 5993 : 1970 |
Aluminized steel wire for telegraph and telephone purposes |
------ |
------ |
|
366 |
IS 6009 : 1970 |
Method for evaluation of results of accelerated corrosion test |
Methods of tests |
------ |
|
367 |
IS 6010 : 1971 |
Recommended practice for photographic processing in spectrochemical analysis |
------ |
------ |
|
368 |
IS 6011 : 1970 |
Carbon steel tubes for use on board ships for pressure services |
------ |
------ |
|
369 |
IS 6013 : 1970 |
Specification for trowels for use in foundries |
Product Specification |
------ |
|
370 |
IS 6163 : 1978 |
Centrifugaly cast (spun) iron low pressure pipes for water, gas and sewage |
------ |
------ |
|
371 |
IS 6170 : 1971 |
Specification for platinum crucible and lid |
Product Specification |
------ |
|
372 |
IS 6227 : 1971 |
Code of practice for use of metal arc welding in tubular structure |
------ |
------ |
|
373 |
IS 6253 : 1971 |
Method for simple torsion testing of copper and copper alloy wire |
------ |
------ |
|
374 |
IS 6331 : 1987 |
Automotive Grey Iron Castings |
------ |
------ |
|
375 |
IS 6392 : 1971 |
Specification for steel pipe flanges |
Product Specification |
------ |
|
376 |
IS 6416 : 1988 |
Methods for measuring case depth of steel (First Revision) |
Methods of tests |
------ |
|
377 |
IS 648 : 2006 |
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification (Fifth Revision) |
Product Specification |
------ |
|
378 |
IS 6520 : 1972 |
Method for the determination of K-values of a tensile testing system |
------ |
------ |
|
379 |
IS 6560 : 1996 |
Molybdenum and chromium-molybdenum low alloy steel welding rods and bare electrodes for gas shielded arc welding |
Others |
------ |
|
380 |
IS 6727 : 1972 |
Specification for fireclay checker - Bricks for open - Hearth furnace |
Product Specification |
------ |
|
381 |
IS 6788 : 1973 |
Specification for chromite sand for use in foundries |
Product Specification |
------ |
|
382 |
IS 6878 : 1973 |
Method of reverse bend testing of copper and copper alloy wire |
------ |
------ |
|
383 |
IS 6885 : 1973 |
Method for Knoop hardness testing of metals |
------ |
------ |
|
384 |
IS 6901 : 2009 |
Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar |
Safety Standard |
------ |
|
385 |
IS 6911 : 1992 |
Stainless steel plate, sheet and strip |
System Standard |
------ |
|
386 |
IS 6914 : 1978 |
Cast billets ingots and continuously cast billets for rolling into structural steel (standard quality) |
------ |
------ |
|
387 |
IS 6915 : 1978 |
Cast billet ingots and continuously cast billets for rolling into structural steel : oartdinary quality |
------ |
------ |
|
388 |
IS 7 : 1980 |
Moderate Heat Duty Fireclay Refractories Group B |
------ |
------ |
|
389 |
IS 7094 : 1984 |
Aluminium and aluminium alloy welded tube for general engineering purposes |
------ |
------ |
|
390 |
IS 7095 : 1973 |
Method for verification of Knoop hardness testing machines |
------ |
------ |
|
391 |
IS 7097 : 1973 |
Method for Calibration of Standardized Blocks for Verification of Knoop Hardness Testing Machines |
------ |
------ |
|
392 |
IS 727 : 1964 |
Hard drawn carbon steel wire for springs for general engineering purposes (revised) |
------ |
------ |
|
393 |
IS 7270 : 1974 |
Bright Bars (standard Quality) |
------ |
------ |
|
394 |
IS 7271 : 1974 |
Bright Bars (ordinary/commerical Quality) |
------ |
------ |
|
395 |
IS 728 : 1956 |
Methods for determining of weight, thickness and uniformity of coating on galvanised articles other than wires and sheets |
------ |
------ |
|
396 |
IS 7280 : 1974 |
Bare wire electrodes for submerged arc welding of structural steels |
Product Specification |
------ |
|
397 |
IS 7281 : 1974 |
Code of practice for immersed ultrasonic testing by the reflection method using pulse longitudinal waves |
------ |
------ |
|
398 |
IS 7291 : 1981 |
Specification for high speed tool steels (First Revision) |
Product Specification |
------ |
|
399 |
IS 735 : 1956 |
Wrought aluminium and aluminium alloys forging stock (for general engineering purposes) |
------ |
------ |
|
400 |
IS 7438 : 1985 |
Method of test for acid - Insoluble content in iron, copper, tin and bronze powders (First Revision) |
Methods of tests |
------ |
|
401 |
IS/ISO 7452 : 2002 |
Hot-Rolled structural steel plates - tolerances on dimensions and shape |
Product Specification |
------ |
|
402 |
IS 7494 : 1981 |
Specification for steel for valves for internal combustion engines (First Revision) |
Product Specification |
------ |
|
403 |
IS 7754 : 1975 |
Method for designation of the microstructure of graphite in cast iron |
Code of Practice |
------ |
|
404 |
IS 7904 : 1995 |
High Carbon Steel Wire Rods |
Code of Practice |
------ |
|
405 |
IS/ISO/TS 80004 : Part 1 : 2010 |
Nanotechnologies - Vocabulary: Part 1 core terms |
Terminology |
------ |
|
406 |
IS/ISO/TS 80004 : Part 3 : 2010 |
Nanotechnologies - Vocabulary: Part 3 Carbon Nano - Objects |
Terminology |
------ |
|
407 |
IS/ISO/TS 80004 : Part 8 : 2013 |
Nanotechnologies - Vocabulary: Part 8 nanomanufacturing process |
Terminology |
------ |
|
408 |
IS 8051 : 1976 |
Steel ingots and billets for the production of volute, helical and laminated springs for automotive suspension |
------ |
------ |
|
409 |
IS 8053 : 1976 |
Steel Ingots and Billets for the Production of Steel Wire for the Manufacture of Wood Screws |
------ |
------ |
|
410 |
IS 8054 : 1976 |
Steel ingots and billets for production of laminated springs (railway rolling stock) |
------ |
------ |
|
411 |
IS 8055 : 1976 |
Steel ingots and billets for the production of spring washers |
------ |
------ |
|
412 |
IS 8056 : 1976 |
Steel ingots and billets for the production of hard drawn steel wire for upholstry springs |
------ |
------ |
|
413 |
IS 8057 : 1976 |
Steel ingots and billets for the production of wire rod for the manufacture of machine screws : bart cold heading process |
------ |
------ |
|
414 |
IS 8062 : Part 1 : 1976 |
Code of practice for cathodic protection of steel structures,Part 1 Genral Princples |
------ |
------ |
|
415 |
IS 813 : 1986 |
Scheme Of Symbols For Welding |
Code of Practice |
------ |
|
416 |
IS 815 : 1974 |
Classification coding of covered electrodes for metal arc welding of structural steels |
------ |
------ |
|
417 |
IS 823 : 1964 |
Code of procedure for manual metal arc welding of mild steel |
------ |
------ |
|
418 |
IS 8285 : 1976 |
Method for tensile test of copper and copper alloy rolled flat product (thickness less than 2.5 mm) |
------ |
------ |
|
419 |
IS 8500 : 1991 |
Structural Steel - Microalloyed (Medium and High Strength Qualities) |
------ |
------ |
|
420 |
IS 8631 : 1977 |
Specification for copper base alloys for marine propellers |
Product Specification |
------ |
|
421 |
IS 8632 : 1977 |
Method for identification of test piece axes |
Code of Practice |
------ |
|
422 |
IS 8795 : 1978 |
Method for determining case depth of carburized steel by fracture test |
Methods of tests |
------ |
|
423 |
IS 8800 : 1997 |
Technical delivery conditions for steel castings (Excluding Investment Castings) (Third Revision) |
Product Specification |
------ |
|
424 |
IS 8844 : 1978 |
Guidelines for marking purity of gold on gold articles/ornaments |
------ |
------ |
|
425 |
IS 8859 : 1978 |
Specification for cast copper tuyere |
Product Specification |
------ |
|
426 |
IS 8876 : 1978 |
Method for dete - Rmination of residue on chlorination of tungsten metal powder |
Methods of tests |
------ |
|
427 |
IS 8910 : 2010 |
General technical delivery requirements for steel and steel products (First Revision) |
Others |
------ |
|
428 |
IS 9025 : 1993 |
Single Cold-reduced Tinplate and Single Cold-reduced Blackplate - Electrolytic Tinplate Coil and Blackplate Coil for Subsequent Cutting into Sheet For |
------ |
------ |
|
429 |
IS 9175 : Part 1 : 1979 |
Rationalized steels for the automobile and ancillary industry: Part 1 chemical composition |
Product Specification |
------ |
|
430 |
IS 9175 : Part 2 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 2 15c8 grade steel |
Product Specification |
------ |
|
431 |
IS 9175 : Part 3 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 3 25c8 grade steel |
Product Specification |
------ |
|
432 |
IS 9175 : Part 4 : 1985 |
Specification for rationaljzed steels for automobile and ancillary industry, mechanical and physical properties: Part 4 30c8 grade steel |
Product Specification |
------ |
|
433 |
IS 9175 : Part 5 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 5 35c8 grade steel |
Product Specification |
------ |
|
434 |
IS 9175 : Part 6 : 1986 |
Specification for rationalized steels for the automobile and ancillary industry: Part 6 mechanical and physical properties of 4oc8 grade steel |
Product Specification |
------ |
|
435 |
IS 9175 : Part 7 : 1986 |
Specification for rationalized steels for the automobile and ancillary industry: Part 7 mechanical and physical properties of 45c8 grade steel |
Product Specification |
------ |
|
436 |
IS 9175 : Part 8 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 8 55c8 grade steel |
Product Specification |
------ |
|
437 |
IS 9175 : Part 9 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 9 11c10s25 grade steel |
Product Specification |
------ |
|
438 |
IS 9175 : Part 10 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 10 14c14s14 grade steel |
Product Specification |
------ |
|
439 |
IS 9175 : Part 11 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 11 25c12s14 grade steel |
Product Specification |
------ |
|
440 |
IS 9175 : Part 12 : 1988 |
Specification for rationalized steels for the automobile and ancillary industry: Part 12 mechanical and physical properties of 35 mn6mo3s15 |
Product Specification |
------ |
|
441 |
IS 9175 : Part 13 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 13 mechanical and physical properties of 40c15s12 grade steel |
Product Specification |
------ |
|
442 |
IS 9175 : Part 15 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 15 mechanical and physical properties of 37c15 grade steel |
Product Specification |
------ |
|
443 |
IS 9175 : Part 16 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 16 mechanical and physical properties of 35mn6mo3 grade steel |
Product Specification |
------ |
|
444 |
IS 9175 : Part 17 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 17 mechanical and physical properties of 35mn6mo4 grade steel |
Product Specification |
------ |
|
445 |
IS 9175 : Part 18 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 18 mechanical and physical properties of 15cr3 grade steel |
Product Specification |
------ |
|
446 |
IS 9175 : Part 19 : 1986 |
Rationalized steels for the automobile and ancillary industry: Part 19 mechanical and physical properties of 16mn5cr4 grade steel |
Product Specification |
------ |
|
447 |
IS 9175 : Part 20 : 1986 |
Rationalized steels for the automobile and ancillary industry: Part 20 mechanical and physical properties of 20mnCr5 grade steel |
Product Specification |
------ |
|
448 |
IS 9175 : Part 21 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 21 mechanical and physical properties of 40cr4 grade steel |
Product Specification |
------ |
|
449 |
IS 9175 : Part 22 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 22 mechanical and physical properties of 40cr4mo3 grade steel |
Product Specification |
------ |
|
450 |
IS 9175 : Part 23 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 23 mechanical and physical properties of 25cr13mo6 grade steel |
Product Specification |
------ |
|
451 |
IS 9175 : Part 24 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 24 mechanical and physical properties of, 35ni5cr2 grade steel |
Product Specification |
------ |
|
452 |
IS 9175 : Part 25 : 1987 |
Secification for rationalized steels for the automobile and ancillary industry: Part 25 mechanical and physical properties of 15ni5cr4mol grade steel |
Product Specification |
------ |
|
453 |
IS 9175 : Part 26 : 1986 |
Rationalized steels for the automobile and ancillary industry: Part 26 mechanical and physical properties of 16ni3cr2 grade steel |
Product Specification |
------ |
|
454 |
IS 9175 : Part 27 : 1987 |
Specificaton for rationalized steels for the automobile and ancillary industry: Part 27 mechanical and physical properties of 15ni7cr4mo2 grade steel |
Product Specification |
------ |
|
455 |
IS 9175 : Part 28 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 28 mechanical and physical properties of 40ni6cr4mo3 grade steel |
Product Specification |
------ |
|
456 |
IS 9175 : Part 29 : 1987 |
Rationalized steels for the automobile and ancillary industry: Part 29 mechanical and physicl properties of of 40ni10cr3mo6 grade steel |
Product Specification |
------ |
|
457 |
IS 9175 : Part 30 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 30 mechanical and physical properties of 20ni7crMo2 grade steel |
Product Specification |
------ |
|
458 |
IS 9175 : Part 31 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 31 mechanical and physical properties:of 20ni7mo2 grade steel |
Product Specification |
------ |
|
459 |
IS 9175 : Part 32 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 32 mechanical and physical properties of 2onicrmo2 grade steel |
Product Specification |
------ |
|
460 |
IS 9175 : Part 33 : 1988 |
Specification for rationalized - steels for the automobile and ancillary industry: Part 33 mechanical and physical properties of 42cr6v10 grade steel |
Product Specification |
------ |
|
461 |
IS 9175 : Part 34 : 1986 |
Rationalized steels for the automobile and ancillary industry: Part 34 mechanical and physical properties of 14crNi6 grade steel |
Product Specification |
------ |
|
462 |
IS 9258 : 1979 |
Method for vickers micro-hardness testing of metals |
------ |
------ |
|
463 |
IS 9346 : 1979 |
Recommended practice for certification of NDT personnel for ultrasonic examination |
------ |
------ |
|
464 |
IS 9467 : 1980 |
Steel ingots and billets for production of rivet bars for structural purposes |
------ |
------ |
|
465 |
IS 9468 : 1980 |
Steel ingots and billets for production of mild steel rivet bars for ship building |
------ |
------ |
|
466 |
IS 9477 : 1980 |
Specification for apparatus for aggregate impact value (Second Revision) |
------ |
------ |
|
467 |
IS 9565 : 1995 |
Acceptance standards for ultrasonic inspection of steel castings - Specification (Second Revision) |
Code of Practice |
------ |
|
468 |
IS 961 : 1975 |
Structural steel (high tensile) |
------ |
------ |
|
469 |
IS 964 : 1956 |
Methods for chemical analysis of silver solder |
Methods of tests |
------ |
|
470 |
IS 9731 : 1980 |
Steel castings for general engineering purposes |
------ |
------ |
|
471 |
IS 9959 : 1981 |
Guidelines for iron ore sinters for iron making in blast furnaces |
Product Specification |
------ |
