Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 2102 (Part 2) : 1993
ISO 2768-2-89
Reviewed In : 2019

IS Title/आईएस शीर्षक : General tolerances: Part 2 geometrical tolerances for features without individual tolerance indications (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : IS 17894 : 2022

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 2

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Dimensions

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : December, 2019

Technical Department/तकनीकी विभाग : PGD (Production and General Engineering Department)

Technical Committee/तकनीकी समिति : PGD 37 (General Engineering and Fasteners Standards Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. MONARCH JOSHI (SCIENTIST-C)

Other Details

Gazette Document : 1

Click to download

Classification details for: IS 2102 : Part 2 : 1993

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 2102 (Part 2) : 1993
ISO 2768-2-89
Reviewed In : 2019 :

1	IS 8000 (Part 1) : 2019 ISO 1101 : 2017 Reviewed In : 2023	Geometrical product specifications (GPS) -- Geometrical tolerancing: Part 1 Tolerances of form, orientation, location and run-out (Second Revision)	PGD 24
2	IS 2102 (Part 1) : 1993 ISO 2768-1-89 Reviewed In : 2024	General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision)	PGD 37
3	IS 12160 : 2015 ISO 8015 : 2011 Reviewed In : 2021	Geometrical product specifications (GPS) -- Fundamentals --Concepts, principles and rules (First Revision)	PGD 24

International Standards Referred In IS 2102 (Part 2) : 1993
ISO 2768-2-89
Reviewed In : 2019

1	ISO 2768 : 2 : 1989
2	ISO 1101 : 1983
3	ISO 2768 : 1 : 1989
4	ISO 5459 : 1981
5	ISO 8015 : 1985

IS 2102 (Part 2) : 1993
ISO 2768-2-89
Reviewed In : 2019 is Referred in following Indian Standards :

1	IS 666 : Part 2 : 1972	Specification for jig bushes: Part 2 renewable drill bushes (Second Revision)	PGD 35
2	IS 1715 : 2002	Self-holding tapers -- Dimensions (third revision)	PGD 32
3	IS 5936 : 1981	Specification for arbors with morse taper shanks for shell tools (first revision)	PGD 32
4	IS 6710 : 1977	Specification for centre drills type R (first revision)	PGD 32
5	IS 8842 : 1978	Specification for high speed steel butt - Welded single point planing tools	PGD 32
6	IS 8918 : 1978	Dimensions for spindle noses for adjustable adaptors	PGD 32
7	IS 7707 : 1975	Specification for bolster plates for gap frame presses with die cushion	PGD 4
8	IS 666 : Part 1 : 1972	Specification for jig bushes: Part 1 headed and headless jig bushes (Second Revision)	PGD 35
9	IS 2289 : 1976	Specification for 60° dead centres for lathes (First Revision)	PGD 35
10	IS 11346 : 2002	Tests for agricultural and water supply pumps - Code of acceptance (First Revision)	MED 20
11	IS 9065 : 1979	Specification for aluminium hammers	PGD 34
12	IS 12577 : 1989	Sealing pliers - Specification	PGD 34
13	IS 3406 : Part 2 : 2014	Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision)	PGD 37
14	IS 5240 : 1969	SpeclFication for cast skew bollards	TED 17
15	IS 11103 : 1984	Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm)	PGD 25
16	IS 7411 : Part 2 : 1974	Ships' Intermediate Shafts (Integral Flange) - Part II : For Sea-going Vessels	TED 19
17	IS 5269 : 1987	Specification for access hatches for inland vessels (First Revision)	TED 18
18	IS/ISO 7388 : Part 1 : 2007	Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF	PGD 32
19	IS/ISO 7388 : Part 2 : 2007	Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF	PGD 32
20	IS/ISO 7388 : Part 3 : 2007	Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF	PGD 32
21	IS 3280 : 1966	Dimensions for mushroom ventilators with adjustable head - Welded type	TED 17
22	IS 3281 : 1966	Dimensions for mushroom ventilators with fixed head - Welded type	TED 17
23	IS 3282 : 1966	Dimensions for mushroom ventilators with adjustable head - Cast iron type	TED 17
24	IS 3283 : 1966	Dimensions for mushroom ventilators with adjustable head - Cast iron type with provision for passage of light	TED 17
25	IS 9796 : 1981	Specification for non - Weathertight steel doors	TED 17
26	IS 4374 : 1980	Specification for mild steel fabricated vertical bollards with and without lugs (First Revision)	TED 17
27	IS 4010 : 1967	Specification for sounding pipes	TED 17
28	IS 5625 : 1970	Specification for cast cruciform bollards	TED 17
29	IS 5858 : Part 1 : 1970	Accessories to Mechanical Ventilation Systems on Board Ships - Part I : Non-return Valves	TED 17
30	IS 5858 : Part 3 : 1970	Specification for accessories to mechanical ventilation systems on board ships: Part 3 control dampers	TED 17
31	IS 5858 : Part 2 : 1970	Specification for accessories to mechanical ventilation systems on board ships: Part 2 smoke protecting flap valves	TED 17
32	IS 5875 : 1970	Specification for open - Deck scuppers	TED 17
33	IS 5976 : 1971	Specification for ships punkah - Louvres	TED 17
34	IS 6141 : 1971	Specification for ships single sheave blocks without becket	TED 17
35	IS 6140 : 1971	Specification for ships snatch blocks	TED 17
36	IS 6148 : 1971	Specification for head fittings and round nuts used with ships blocks	TED 17
37	IS 6143 : 1971	Specification for sheaves used with ships blocks	TED 17
38	IS 6142 : 1971	Specification for ships single sheave blocks with becket	TED 17
39	IS 6204 : 1971	Specification for cast open roller fairleads	TED 17
40	IS 6195 : 1971	Specification for cast open chocks	TED 17
41	IS 6277 : 1971	Specification for cast mud box	TED 17
42	IS 6636 : 1972	Specification for hood for air pipes of ships piping systems	TED 17
43	IS 13251 : 2019	Hydraulic fluid power ? mounting dimensions for accessories for single rod cylinders, 16 mpa (160 Bar) medium and 25 mpa (250 Bar) series (First Revision)	PGD 36
44	IS/ISO 10821 : 2005	Industrial Sewing Machines - Safety Requirements for Sewing Machines, Units and Systems	MED 29
45	IS 5402 : Part 1 : 2021	Microbiology of the food chain - Horizontal method for the enumeration of microorganisms- Part 1: Colony count at 30 C by the pour plate technique	FAD 31
46	IS 5712 : 1970	Specification for slickers for leather industry	CHD 17
47	IS 6482 : 1971	Specification for tampers and rammers for use in foundries	MTD 14
48	IS 3291 : 1968	Specification for thread take up cams for sewing machines for household purposes (First Revision)	MED 29

Classification Details

Group	:	Gases, Gas Cylinders , Machine tools and other mechanical products
Sub Group	:	Measuring and related equipments
Sub Sub Group	:	Metrological instrument
Aspect	:	Dimensions
Certification	:	None
Relevant Ministries	:
Sustainable development Goals :
Short Commom Man's Title	:	General tolerances Part 2 Geometrical tolerances for features without individual tolerance indicatio
ITC-HS Code	:	741533
Degree of Equivalence	:	Identical under dual numbering
Identical/Equivalent International Standard(s)	:	ISO 2768-2 : 1989
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 2102 : Part 2 : 1993

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 1

Classification details for: IS 2102 : Part 2 : 1993

Cross Reference Details

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 2102 : Part 2 : 1993

List of Expired or Cancelled Licenses under IS : IS 2102 : Part 2 : 1993

List of laboratories for : IS 2102 : Part 2 : 1993

List of Amendement(s) for : IS 2102 : Part 2 : 1993

List of Gazette Document(s) for : IS 2102 : Part 2 : 1993

List of Corigenda Document(s) for : IS 2102 : Part 2 : 1993

List of Product Manuals & SIT