Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 2102 (Part 1) : 1993
ISO 2768-1-89
Reviewed In : 2024

IS Title/आईएस शीर्षक : General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 3

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Dimensions

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : April, 2024

Technical Department/तकनीकी विभाग : PGD (Production and General Engineering Department)

Technical Committee/तकनीकी समिति : PGD 37 (General Engineering and Fasteners Standards Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. MONARCH JOSHI (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 2102 (Part 1) : 1993
ISO 2768-1-89
Reviewed In : 2024 :

Details could not be found.

International Standards Referred In IS 2102 (Part 1) : 1993
ISO 2768-1-89
Reviewed In : 2024

1	ISO 2768 : 1 : 1989
2	ISO 8015 : 1985

IS 2102 (Part 1) : 1993
ISO 2768-1-89
Reviewed In : 2024 is Referred in following Indian Standards :

1	IS 927 : 1981	Specification for fire hooks (Second Revision)	CED 22
2	IS 902 : 1992	Suction hose couplings for fire fighting purposes - Specification (Third Revision)	CED 22
3	IS 907 : 1984	Specification for suction strainers, cylindrical type for fire fighting purposes (Second Revision)	CED 22
4	IS 5714 : 1981	Specification for hydrant stand - Pipe for fire fighting (First Revision)	CED 22
5	IS 8090 : 1976	Specification for couplings, branch pipe, nozzle used in hose reel tubing for fire fighting (First Revision)	CED 22
6	IS 15841 : 2009	Snowboard - Boots - Interface with ski-binding	PGD 27
7	IS 9459 : 1980	Specification for apparatus for use in Measurement of Length change of hardened Cement Paste, Mortar and Concrete	CED 2
8	IS 7664 : 2005	Guide pillar for press tool die sets - Specification (Second Revision)	PGD 4
9	IS 8127 : 2005	Guide bushes for press tool die sets - Specification (Second Revision)	PGD 4
10	IS 10650 : 1983	Specification for pressure pins	PGD 4
11	IS 12665 : Part 2 : 1989	Press Working Tools - Shanks:part 2 Shanks to Suit Rivetting	PGD 4
12	IS 12665 : Part 3 : 1989	Press Working Tools - Shanks:part 3 Shanks with Screwed Shaft	PGD 4
13	IS 12665 : Part 4 : 1989	Press working tools - shanks:Part 4 Shanks with neck and collar	PGD 4
14	IS 12665 : Part 5 : 1996	Press working tools - Shanks Part 5 Shanks with square flanges	PGD 4
15	IS 12665 : Part 6 : 1996	Press Working Tools - Shanks - Part 6 : Shanks with Rectangular Flanges	PGD 4
16	IS 12665 : Part 7 : 1996	Press Working Tools - Shanks - Part 7 : Shanks with Screwed Shaft and Collar	PGD 4
17	IS 14497 : 1997	Capacity rating and dimensions for trimming presses	PGD 4
18	IS 13078 : 1991	Pneumatic hose couplings - Specification	PGD 8
19	IS 8711 : 2002	Gap frame open front mechanical presses - Capacity ratings and dimensions (First Revision)	PGD 4
20	IS 9266 : Part 4 : 1990	Press working die sets (Boss Type) - Specieication: Part 4 centre post reverse rectangular die sets	PGD 4
21	IS 10068 : Part 3 : 1990	Press working die sets - Plain type - Specification: Part 3 centre post round die sets	PGD 4
22	IS 10068 : Part 4 : 1997	Press working die sets (Plain Type): Part 4 rear post rectangular die sets - Specification	PGD 4
23	IS 10068 : Part 5 : 1996	Press working die sets (Plain Type): Part 5 rear post square die sets - Specification	PGD 4
24	IS 10068 : Part 6 : 1996	Press working die sets (Plain Type): Part 6 rear post round die sets - Specification	PGD 4
25	IS 10731 : 2000	Presses - Slide holes for locating the shanks - Dimensions (First Revision)	PGD 4
26	IS 2804 : 1998	Palm grips - Specification (First Revision)	PGD 35
27	IS 2805 : 1964	Dimensions for ball grips	PGD 35
28	IS 2890 : 1983	Specification for taper handles for machine tools (First Revision)	PGD 35
29	IS 2904 : 1998	Ball handles	PGD 35
30	IS 2909 : 1998	Star grips - Specification (First Revision)	PGD 35
31	IS 2975 : 1998	Control levers with ball grip	PGD 35
32	IS 2990 : 1986	Specification for tenons (First Revision)	PGD 35
33	IS 4279 : 1984	Goose Neck Clamps	PGD 35
34	IS 4291 : 1996	C - Washers - Specification (First Revision)	PGD 35
35	IS 4292 : 1984	Strap Clamps	PGD 35
36	IS 4293 : 1984	U-type Clamps	PGD 35
37	IS 4295 : 1983	Specification for locking dogs (Catches) with springs (First Revision)	PGD 35
38	IS 4297 : 1996	Spherical washers and conical seats - Specification (First Revision)	PGD 35
39	IS 4298 : 2009	Swing C- Washers - Specification (Second Revision)	PGD 35
40	IS 4299 : 1982	Specification for jig feet (First Revision)	PGD 35
41	IS 5091 : 1969	Dimensions For Circular Base Plates	PGD 35
42	IS 5092 : 1969	Dimensions for square and rectangular base plates	PGD 35
43	IS 5093 : 1996	Locating pins (Round) - Specification (First Revision)	PGD 35
44	IS 5097 : 1969	Dimensions for diamond locating studs	PGD 35
45	IS 5998 : 1984	Parallel Sided Clamp Plates	PGD 35
46	IS 5999 : 1999	Swing Latches	PGD 35
47	IS 6080 : 1985	Specification for double ended clamps (First Revision)	PGD 35
48	IS 6081 : 1985	Specification for plain clamps (First Revision)	PGD 35
49	IS 6082 : 1985	Specification for slotted clamps (First Revision)	PGD 35
50	IS 6090 : 1984	Specification for cam operated clamps (First Revision)	PGD 35
51	IS 6238 : 1971	Specification for spring collets	PGD 35
52	IS 6336 : 1989	Screws for thrust pads (Fixtures) - Specification (First Revision)	PGD 35
53	IS 6440 : 1997	Quick action drilling jigs - Specification (First Revision)	PGD 35
54	IS 7824 : 1995	Quick change drill chucks, collets and floating reamer holders Specification (First Revision)	PGD 35
55	IS 12250 : 1987	Specification for fixed clamp supports	PGD 35
56	IS 12525 : 1989	Snap Rings	PGD 35
57	IS 12582 : 1989	Tommy screws with fixed bar Specification	PGD 35
58	IS 10574 : 1983	Specification for clamp buttons to be used with parallel sided clamp plates	PGD 35
59	IS 10602 : 1983	Specification for floor plates	PGD 35
60	IS 10882 : 1984	Specification for cam levers	PGD 35
61	IS 11278 : 1985	Specification for jig feet with cylindrical shank	PGD 35
62	IS 11325 : 1985	Specification for adjustable clamp support	PGD 35
63	IS 11613 : 1986	Specification for renewable lock screw locating pins	PGD 35
64	IS 11831 : 1986	Specification for jig foot bolts	PGD 35
65	IS 12106 : 1987	Dimensions for modular units for machine tool construction - Spindle units	PGD 35
66	IS 12280 : 1988	Specification for tenon without counterbore	PGD 35
67	IS 14693 : 1999	2 - Jaw and 3 - Jaw power operated wedge type chucks - Specification	PGD 35
68	IS 14694 : 1999	2-Jaw and 3-Jaw Power Operated High Speed Lathe Chucks With Through Bore - Specification	PGD 35
69	IS 10078 : 1982	Specification for Jolting apparatus used for testing Cement	CED 2
70	IS 1715 : 2002	Self-holding tapers -- Dimensions (third revision)	PGD 32
71	IS 6682 : 1991	Morse taper extension sockets -- Specification (first revision)	PGD 32
72	IS 6702 : 1991	Morse taper reduction sleeves specification (first revision)	PGD 32
73	IS 8405 : 2005	Thread rolling cylindrical dies -- Specification (first revision)	PGD 32
74	IS 8611 : 1988	Technical supply conditions for milling arbors and accessories (First Revision)	PGD 32
75	IS 10514 : 1983	Specification for split taper socket for tools with parallel shank and driving tenon	PGD 32
76	IS 10571 : 1983	Specification for split taper sockets for tools with parallel shank, driving square and driving tenon	PGD 32
77	IS 11172 : Part 2 : 1985	Recommendations for tool shanks for numerically controlled machine tools (Tool Stationary Type): Part 2 prismatic shank	PGD 32
78	IS 11351 : 2005	Stub self-holding tapers -- Dimensions (first revision)	PGD 32
79	IS 11938 : 1987	Specification for tool adaptors for numerically controlled machine tools (Tool rotating type)	PGD 32
80	IS 11949 : 1987	Specification for turret sockets	PGD 32
81	IS 11950 : 1987	Specification for tool adaptors for numerically controlled machine tools (Tool stationary type)	PGD 32
82	IS 12320 : 1988	Technical supply conditions for circular screwing dies	PGD 32
83	IS 12321 : 1988	Specification for circular screwing dies for ISO metric threads	PGD 32
84	IS 12536 : 1989	Small tools -- Disc type gear shaper cutters -- Specification	PGD 32
85	IS 12537 : 1989	Small tools -- Shank type gear shaper cutter -- Specification	PGD 32
86	IS 12538 : 1989	Small tools -- Shank type gear shaper cutter -- Specification	PGD 32
87	IS 13303 : 1992	Countersinks 60-degree, 90-degree and 120-degree with morse taper shank -- Specification	PGD 32
88	IS 13304 : 1992	Countersinks 60Â°,90Â° and 120Â° with parallel shank -- Specification	PGD 32
89	IS 16059 : 2013	Solid carbide parallel shank twist drills jobber series -- Specification	PGD 32
90	IS 16060 : 2013	Solid carbide parallel shank twist drills stub series -- Specification	PGD 32
91	IS 10070 : 1982	Specification for machine for Abrasion testing of Coarse Aggregates	CED 2
92	IS 10058 : 1985	Specification For Forceps, Fixation, Graefe's Pattern (Modified) (First Revision)	MHD 5
93	IS 14895 : 2000	Ophthalmic instruments - Spuds, foreign body - Waltons sizes 1 and 1.5 mm wide, stainless steel - Specification	MHD 5
94	IS 4569 : Part 1 : 1985	Specification for scissors, eye: Part 1 corneal (Second Revision)	MHD 5
95	IS 5512 : 1983	Specification for Flow Table for use in Tests of Hydraulic Cements and Pozzolanic Materials (First Revision)	CED 2
96	IS 4790 : 1989	Eye Surgery Instruments -Knife, Corneal Splitting, Lang's And Tooke's Pattern (Modified) Specification (Second Revision)	MHD 5
97	IS 6420 : 1989	Eye Surgery Instruments - Retractor, Eye Lachrymal Sac, Muller's Pattern (Modified) - Specification (First Revision)	MHD 5
98	IS 666 : Part 1 : 1972	Specification for jig bushes: Part 1 headed and headless jig bushes (Second Revision)	PGD 35
99	IS 2289 : 1976	Specification for 60° dead centres for lathes (First Revision)	PGD 35
100	IS 3793 : 1966	Specification for live centres	PGD 35
101	IS 5936 : 1981	Specification for arbors with morse taper shanks for shell tools (first revision)	PGD 32
102	IS 6710 : 1977	Specification for centre drills type R (first revision)	PGD 32
103	IS 8842 : 1978	Specification for high speed steel butt - Welded single point planing tools	PGD 32
104	IS 8918 : 1978	Dimensions for spindle noses for adjustable adaptors	PGD 32
105	IS 8771 : 1985	Specification For Needle Holder, Eye, Scissors And Forceps Combined, Castroviejo's Pattern (Modified) (First Revision)	MHD 5
106	IS 9061 : 1989	Eye Surgery Instruments - Dilators, Punctum, Wilder's Pattern (Modified) - Specification (First Revision)	MHD 5
107	IS 9062 : 1987	Specification For Probes, Lacrimal, Bowman's Pattern (Modified) (First Revision)	MHD 5
108	IS 9134 : 1987	Specification For Trephine, Corneal, Castroviejo's Pattern (Modified) (First Revision)	MHD 5
109	IS 9329 : 1987	Specification For Speculum, Eye, Clark's Pattern (Modified) (First Revision)	MHD 5
110	IS 9378 : 1987	Specification For Speculum, Eye, Castroviejo's Pattern (Modified) (First Revision)	MHD 5
111	IS 7707 : 1975	Specification for bolster plates for gap frame presses with die cushion	PGD 4
112	IS 666 : Part 2 : 1972	Specification for jig bushes: Part 2 renewable drill bushes (Second Revision)	PGD 35
113	IS 13308 : 1992	Lifting appliances - Sheaves - Technical supply condition	MED 14
114	IS 8737 : 2017	Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision)	MED 16
115	IS 11346 : 2002	Tests for agricultural and water supply pumps - Code of acceptance (First Revision)	MED 20
116	IS 2852 : 1998	CARPENTERS’ AUGERS - SPECIFICATION ( First Revision )	PGD 34
117	IS 15947 : PART 2 : 2012	Concrete delivery pipelines: Part 2 general requirements for pipeline accessories	MED 18
118	IS 13825 : 1993	Household sewing machines - Arm shaft front bush - Specification	MED 29
119	IS 13120 : 1991	Household sewing machines - Flywheel bush - Specification	MED 29
120	IS 12798 : 1989	Household sewing machines - Flywheels - Specification	MED 29
121	IS 4188 : 1996	Household sewing machines - Oscillating shaft - Specification (First Revision)	MED 29
122	IS 9065 : 1979	Specification for aluminium hammers	PGD 34
123	IS 10883 : 1984	Specification for single wheel type pipe cutters	PGD 34
124	IS 3375 : 1991	Household sewing machines - Bobbin case - Specification (Second Revision)	MED 29
125	IS 1295 : 1990	Household sewing machines - Needle bar - Specification (Second Revision)	MED 29
126	IS 12128 : 1987	Specification for reversible handles for cross cut saws	PGD 34
127	IS 12515 : 1988	Specification for wooden setting cat for two - Men cross cut saws	PGD 34
128	IS 12577 : 1989	Sealing pliers - Specification	PGD 34
129	IS 6680 : 1992	Railway carriagefans - Specification (First Revision)	ETD 32
130	IS 15513 : Part 3 : 2004	Textile machinery and accessories – Heald frames – Part 3 Guides for heald frames	TXD 14
131	IS 15513 : Part 1 : 2004	Textile machinery and accessories – Heald frames – Part 1 Heald-carrying rod fixed to the frame stave by rod support – Coordinated dimensions	TXD 14
132	IS 15513 : Part 2 : 2004	Textile machinery and accessories – Heald frames – Part 2 Heald-carrying road fixed directly on the frame stave – Coordinated dimensions	TXD 14
133	IS 10074 : 1982	Specification for compaction mould assembly for light and heavy compaction test for soils	CED 43
134	IS 10077 : 1982	Specification for equipment for determination of shrinkage factors	CED 43
135	IS 10589 : 1983	Specification for equipment for subsurface sounding of soils	CED 43
136	IS 10837 : 1984	Moulds And Accessories For Determination Of Density Index (relative Density) Of Cohesionless Soils	CED 43
137	IS 11196 : 1985	Specification for equipment for determination of liquid limit of soils cone penetration met - Hod	CED 43
138	IS 12175 : 1987	Specification for rapid moisture meter for rapid determination of water content for soil	CED 43
139	IS 9259 : 1979	Specification for liquid limit apparatus for soils	CED 43
140	IS 9198 : 1979	Specification for compaction rammer for soil testing	CED 43
141	IS 11593 : 1986	Shear Box (large) For Testing Of Soils	CED 43
142	IS 11229 : 1985	Specification for shear box for testing of soils	CED 43
143	IS 11209 : 1985	Specification for mould assembly for determination of permeability of soils	CED 43
144	IS 9669 : 1980	Specification for cbr moulds and its accessories	CED 43
145	IS 9640 : 1980	Specification for split spoon sampler	CED 43
146	IS 14285 : 1995	Transmission devices - Flexible couplings - Tyre type - Specification	PGD 33
147	IS 12287 : 1988	Specification for consolidometer for determination of consolidation properties	CED 43
148	IS 12979 : 1990	Mould for determination of linear shrinkage - Specification	CED 43
149	IS 13468 : 1992	Apparatus for Determination of Dry Density of Soil by Core Cutter Method-	CED 43
150	IS 15100 : 2018	Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision)	MED 16
151	IS 2102 : Part 2 : 1993	General tolerances: Part 2 geometrical tolerances for features without individual tolerance indications	PGD 37
152	IS 2540 : 2008	Dimensions for threaded centre holes (First Revision)	PGD 37
153	IS 3406 : Part 2 : 2014	Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision)	PGD 37
154	IS 10509 : 1983	Specification for dead spindles used on jute spinning frames	TXD 14
155	IS 14761 : 2000	Link type thread take up lever sub assembly for industrial sewing machines - Specification	MED 29
156	IS/ISO 13985 : 2006	Liquid hydrogen - Land vehicle fuel tanks	MED 16
157	IS 13379 : 1992	Forestry tools - Wooden setting cat, bow saw blades - Specification	PGD 34
158	IS 13380 : 1992	Forestry tools - Hole punch, bow saw blades - Specification	PGD 34
159	IS 13628 : 1992	Textile machinery - Squeezing rollers for textile finishing machines - Specification	TXD 14
160	IS 5240 : 1969	SpeclFication for cast skew bollards	TED 17
161	IS 14146 : 1994	Raw optical glass - Resistance to attack by aqueous alkaline phosphate - Containing detergent solutions at 50°C - Testing and classification	PGD 39
162	IS 12676 : 1989	Oil impregnated paper insulated condenser bushings - Dimensions and requirements	ETD 6
163	IS 15137 : 2002	Metal connecting lugs for porcelain transformer bushings - Specification	ETD 6
164	IS 3347 : Part 8 : Sec 2 : 1992	Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 : 52 kV bushings: Sec 2 metal parts	ETD 6
165	IS 14347 : 1996	Plummer block housings - Specification	PGD 13
166	IS 11154 : Part 2 : 1994	Nameplates -- Dimensions: Part 2 Circular nameplates (First Revision)	PGD 24
167	IS 11154 : Part 3 : 1994	Nameplates -- Dimensions: Part 3 Triangular nameplates (First Revision)	PGD 24
168	IS 11154 : Part 4 : 1994	Nameplates -- Dimensions: Part 4 Elliptical and segmental nameplates (First Revision)	PGD 24
169	IS 3510 : 1990	Engineering Metrology - Toolmaker Flats - Specification ( First Revision )	PGD 25
170	IS 4241 : 1990	Engineering metrology - Engineer Parallels - Specification ( First Revision )	PGD 25
171	IS 9475 : 1986	Specification for plug and ring gauges for self release 7/24 tapers (First Revision)	PGD 25
172	IS 13337 : 1992	Straight reducer coupling body for oil hydraulic system - Specification	PGD 36
173	IS 7411 : Part 2 : 1974	Ships' Intermediate Shafts (Integral Flange) - Part II : For Sea-going Vessels	TED 19
174	IS 4358 : 1996	Specification for Sickles (First Revision)	FAD 11
175	IS 6813 : 2000	Sowing equipment - Seed - Cum - Fertilizer drill - Specification (Second Revision)	FAD 11
176	IS 14646 : 1999	Shipbuilding - Mooring buoy - Specification	TED 18
177	IS 5269 : 1987	Specification for access hatches for inland vessels (First Revision)	TED 18
178	IS 12163 : 1987	Specification for Cant Hook	FAD 11
179	IS 12409 : 1988	Specification for Garden Sword	FAD 11
180	IS 12627 : 1989	Forestry Tools - Loop Handles Two Men Cross Cut Saws - Specification	FAD 11
181	IS 12651 : 1989	Forestry Tools - Setting Anvil for Raker Toothed Two Men Cross Cut Saws - Specification	FAD 11
182	IS 12696 : 1989	Forestry Tools - Setting Pliers, Bow Saw Blade - Specification	FAD 11
183	IS 12697 : 1989	Forestry Tools - Setting Hammer Raker Toothed Two Men Cross Cut Saws - Specification	FAD 11
184	IS 12698 : 1989	Forestry Tools - Tree Marking Digit Set - Specification	FAD 11
185	IS 12703 : 1989	Forestry Tools - Tree Marking Hammers - Specification	FAD 11
186	IS 12704 : 1989	Forestry Tools - Wooden Jointer For Bow Saw Blade - Specification	FAD 11
187	IS 13151 : 1991	Forestry Tools - Two Men Log Tongs - Specification	FAD 11
188	IS 13373 : 1992	Horticultural Equipment - Grass Shear - Specification	FAD 11
189	IS 13374 : 1992	Forestry Tools - Handsappie, Nursery (Kutla) - Specification	FAD 11
190	IS 13376 : 1992	Forestry Tools - Debarking Spud - Specification	FAD 11
191	IS 13377 : 1992	Forestry Tools - Shrub Cutting Knife - Specification	FAD 11
192	IS 13378 : 1992	Forestry Tools - Felling Lever - Specification	FAD 11
193	IS 13821 : 1993	Forestry Tools - Wooden Filing Vice - Specification	FAD 11
194	IS 14523 : 1998	Forestry Tools - Dibbling Board - Specification	FAD 11
195	IS 14524 : 1998	Forestry Tools - Dibble Iron - Specification	FAD 11
196	IS 14525 : 1998	Forestry Tools - Seed Plucker - Specification	FAD 11
197	IS 14526 : 1998	Forestry tools - Plant carrier - Specification	FAD 11
198	IS 14540 : 1998	Intercultivation Equipment - Hand Hoes - Specification	FAD 11
199	IS 14541 : 1998	Forestry and Plantation Tools - Hoes and Forks - Specification	FAD 11
200	IS 12164 : 1987	Specification for Log Tongs	FAD 11
201	IS 8614 : 1993	Milling Arbors with Self-release 7/24 Taper	PGD 32
202	IS 13485 : Part 1 : 1992	Forestry Tools - Stalk Puller - Specification Part 1 Light Duty	FAD 11
203	IS 13485 : Part 2 : 1998	Forestry Tools - Stalk Puller - Specification : Part 2 Heavy Duty	FAD 11
204	IS/ISO 7388 : Part 1 : 2007	Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF	PGD 32
205	IS/ISO 7388 : Part 2 : 2007	Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF	PGD 32
206	IS/ISO 7388 : Part 3 : 2007	Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF	PGD 32
207	IS 5095 : 1998	End locating plugs	PGD 35
208	IS 5224 : 1993	Qilseeds Milling Machinery - Oil Expellers Single Barrel - Specification (Second Revision)	FAD 13
209	IS 15542 : 2005	Power - Operated Chaff Cutter - Safety Requirements	FAD 20
210	IS 2340 : 1972	Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision)	PGD 32
211	IS 5096 : 1969	Dimensions for round locating studs	PGD 35
212	IS 13016 : 1991	Internal combustion engines - Radiator drain cocks - Specification	TED 2
213	IS 3280 : 1966	Dimensions for mushroom ventilators with adjustable head - Welded type	TED 17
214	IS 3281 : 1966	Dimensions for mushroom ventilators with fixed head - Welded type	TED 17
215	IS 3282 : 1966	Dimensions for mushroom ventilators with adjustable head - Cast iron type	TED 17
216	IS 3283 : 1966	Dimensions for mushroom ventilators with adjustable head - Cast iron type with provision for passage of light	TED 17
217	IS 2577 : Part 5 : 2018	Road Vehicles - Fuse Links Part 5 Links with Axial Terminals (Strip Fuse-links) Types SF30 and SF51 and Test Fixtures (Third Revision)	TED 11
218	IS 9796 : 1981	Specification for non - Weathertight steel doors	TED 17
219	IS 4374 : 1980	Specification for mild steel fabricated vertical bollards with and without lugs (First Revision)	TED 17
220	IS 4010 : 1967	Specification for sounding pipes	TED 17
221	IS 5625 : 1970	Specification for cast cruciform bollards	TED 17
222	IS 5858 : Part 1 : 1970	Accessories to Mechanical Ventilation Systems on Board Ships - Part I : Non-return Valves	TED 17
223	IS 5858 : Part 3 : 1970	Specification for accessories to mechanical ventilation systems on board ships: Part 3 control dampers	TED 17
224	IS 5858 : Part 2 : 1970	Specification for accessories to mechanical ventilation systems on board ships: Part 2 smoke protecting flap valves	TED 17
225	IS 5875 : 1970	Specification for open - Deck scuppers	TED 17
226	IS 5876 : 2008	Shipbuilding - Hopper Scuppers( Bi-lingual)	TED 17
227	IS 5876 : 2008	Shipbuilding - Hopper scuppers (First Revision)	TED 17
228	IS 5976 : 1971	Specification for ships punkah - Louvres	TED 17
229	IS 6141 : 1971	Specification for ships single sheave blocks without becket	TED 17
230	IS 6140 : 1971	Specification for ships snatch blocks	TED 17
231	IS 6148 : 1971	Specification for head fittings and round nuts used with ships blocks	TED 17
232	IS 6143 : 1971	Specification for sheaves used with ships blocks	TED 17
233	IS 6142 : 1971	Specification for ships single sheave blocks with becket	TED 17
234	IS 6204 : 1971	Specification for cast open roller fairleads	TED 17
235	IS 6195 : 1971	Specification for cast open chocks	TED 17
236	IS 6277 : 1971	Specification for cast mud box	TED 17
237	IS 6636 : 1972	Specification for hood for air pipes of ships piping systems	TED 17
238	IS 12670 : 1989	Veterinary - Pump stomach specification	MHD 13
239	IS 12652 : 1989	Forestry Tools - Raker Adjuster - Cum - Setting Iron For Two Men Cross Cut Saws - Specification	FAD 11
240	IS 302 : Part 2 : Sec 35 : 2017	Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)	ETD 32
241	IS 11172 : Part 1 : 2018	Tool holders with cylindrical shank: Part 1 Cylindrical shank, location bore -- Specification (first revision)	PGD 32
242	IS 16800 : Part 1 : 2018	Tools for pressing - Wear plates for press dies: Part 1 type A	PGD 4
243	IS 4294 : 2018	Jig buttons - Specification (Second Revision)	PGD 35
244	IS 13251 : 2019	Hydraulic fluid power ? mounting dimensions for accessories for single rod cylinders, 16 mpa (160 Bar) medium and 25 mpa (250 Bar) series (First Revision)	PGD 36
245	IS 15299 : 2019	Machine tools - Mounting of grinding wheels by means of hub flanges (Second Revision)	PGD 9
246	IS 11139 : 2019	Adjusters for control cables for moped - Specification (First Revision)	TED 2
247	IS/ISO 3795 : 1989	Road Vehicles and Tractors and Machinery for Agriculture and Forestry - Determination of Burning Behaviour of Interior Materials	MED 7
248	IS 17207 : Part 1 : 2019	Clamping Flanges for Superabrasive Cutting-off Wheels Part 1 Natural Stone	PGD 9
249	IS 17207 : Part 2 : 2019	Clamping Flanges for Superabrasive Cutting-off Wheels Part 2 Building and Construction	PGD 9
250	IS 17219 : Part 1 : 2019	Tools for Pressing â€” Gas Springs Part 1 General Specifications	PGD 4
251	IS 17223 : 2019	Tools for Pressing â€” L-Shaped Guides	PGD 4
252	IS 17224 : 2019	Tools for Pressing â€” Guide plates â€” U- and V-blocks	PGD 4
253	IS 17225 : 2019	Tools for Moulding â€” Sprue Pullers	PGD 4
254	IS 17227 : 2019	Press Tools for Tablets â€” Punches and Dies	PGD 4
255	IS 1231 : 2019	Dimensions and Output Series of Foot Mounted Induction Motors — Frame Numbers 56 to 315 L ( Fourth Revision )	ETD 15
256	IS 11154 : Part 1 : 1994	Nameplates -- Dimensions: Part 1 Square and rectangular nameplates (First Revision)	PGD 24
257	IS 5094 : 1969	Dimensions for diamond locating pins	PGD 35
258	IS 16933 : 2018	Tools for Moulding - Sprue Bushes - Dimensions	PGD 4
259	IS 16727 : 2018	Tools for Pressing â€” Sliding Plates	PGD 4
260	IS/ISO 10821 : 2005	Industrial Sewing Machines - Safety Requirements for Sewing Machines, Units and Systems	MED 29
261	IS 9000 : Part 7 : Sec 7 : 2020	Environmental Testing Part 7 Tests Section 7 Test Eh: Hammer tests ( First Revision )	LITD 1
262	IS 904 : 1983	Specification for 2 - Way and 4 - Way suction collecting heads for fire fighting purposes (Second Revision)	CED 22
263	IS 15500 : Part 1 to 8 : 2004	Deepwell handpumps, components and special tools - Specification	MED 27
264	IS 6799 : 1987	Specification for padlocks, bicycle (First Revision)	MED 33
265	IS 5402 : Part 1 : 2021	Microbiology of the food chain - Horizontal method for the enumeration of microorganisms- Part 1: Colony count at 30 C by the pour plate technique	FAD 31
266	IS 16323 : 2017	SHIPS AND MARINE TECHNOLOGY - MARINE MAGNETIC COMPASSES, BINNACLES AND AZIMUTH READING DEVICES	TED 19
267	IS 10086 : 1982	Specificaton for moulds for use in tests of cement and concrete	CED 2
268	IS/ISO 8528 : Part 2 : 2018	Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines	TED 2
269	IS 16728 : 2018	Tools for pressing - Cam driver plates	PGD 4
270	IS 8035 : 1999	Handpump - Shallow well - Specification (First Revision)	MED 27
271	IS 17219 : Part 3 : 2019	Tools for Pressing â€” Gas Springs Part 3 Gas Spring with Increased Spring Force and Compact Built Height	PGD 4
272	IS 15625 : 2005	Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes	PGD 13
273	IS 16927 : 2018	Tools for Moulding - Angle Pins	PGD 4
274	IS 17219 : Part 4 : 2019	Tools for Pressing â€” Gas Springs Part 4 Gas Springs with Increased Spring Force and Same Built Height	PGD 4
275	IS 9282 : 2021	Wire Ropes and Strands for Suspension Bridges - Specification (Second Revision)	MED 10
276	IS 17219 : Part 2 : 2019	Tools for Pressing â€” Gas Springs Part 2 Specification of Accessories	PGD 4
277	IS 10598 : 1997	Textile machinery – Guide rollers for dyeing and finishing machinery – Specification (first revision)	TXD 14
278	IS 2531 : 1979	Specification for crank shaft for cotton looms (first revision)	TXD 14
279	IS 5712 : 1970	Specification for slickers for leather industry	CHD 17
280	IS 835 : 1978	Specification for bottom shaft for cotton looms (first revision)	TXD 14
281	IS 8137 : 1976	Specification for springs for plain calico looms	TXD 14
282	IS 8139 : 1976	Specification for picking cone and bolt for looms	TXD 14
283	IS 14927 : Part 1 : 2001	Cable trunking and ducting systems for electrical installations: Part 1 general requirements	ETD 14
284	IS 6482 : 1971	Specification for tampers and rammers for use in foundries	MTD 14
285	IS 3291 : 1968	Specification for thread take up cams for sewing machines for household purposes (First Revision)	MED 29
286	IS 12486 : 1988	Specification for meat inspection table	FAD 18
287	IS 12487 : 1988	Specification for offal handling table for small animals	FAD 18
288	IS 8859 : 1978	Specification for cast copper tuyere	MTD 8
289	IS 6254 : 1971	Specification for side weft forks and grates for non-automatic looms	TXD 14
290	IS 5232 : 1990	Eye Surgery Instruments - Forceps, Eye, Cilia, Beer's Pattern (Modified) - Specification (Second Revision)	MHD 5
291	IS 5668 : 1989	Eye surgery instruments - Forceps, eye, dissecting, serrated, fine specification (First Revision)	MHD 5
292	IS 9626 : 1990	Eye Surgery Instruments - Calipers Castroviejo's Pattern (Modified) Specification (First Revision)	MHD 5
293	IS 906 : 1988	Specification for revolving branch pipe for fire fighting (Third Revision)	CED 22
294	IS 7898 : 2001	Manually - Operated Chaff Cutter - Specification (Second Revision)	FAD 20
295	IS 3093 : 1981	Specification for Dah, Jungle Cutting (First Revision)	FAD 11
296	IS 11459 : 1985	Specification for Power - Operated Chaff Cutter	FAD 20
297	IS 10937 : 1984	Specification for nose ring and key, bull	MHD 13
298	IS 10938 : 1984	Specification for searcher, double edged with handle and sheath	MHD 13
299	IS 12329 : 1988	Specification for self - Centring bone holding forceps	MHD 13
300	IS 12344 : 1988	Specification for reduction forceps	MHD 13
301	IS 15327 : 2022	Welding coordination - Tasks and responsibilities (Second Revision)	MTD 11
302	IS 10953 : 1984	Specification for catheter uterine, single channel (Nelson Type)	MHD 13
303	IS 10683 : 1983	Specification for Khurpi	FAD 11
304	IS 1297 : 1991	Household sewing machines presser bar - Specification (Third Revision)	MED 29
305	IS 4296 : Part 2 : 2015	Tools for pressing: Part 2 punches with cylindrical head and straight or reduced shank (First Revision)	PGD 4
306	IS 12245 : 1988	Specification for dilators, teat (Hudson)	MHD 13
307	IS 17924 : 2022	Determination of Pesticide Residue in Herbal Materials	AYD 1
308	IS 14106 : 2018	Direct action hand pumps - Specification (First Revision)	MED 27
309	IS 6366 : 1971	Specification for sprue plugs for use in foundries	MTD 14
310	IS 8692 Part 2 : 2013	Cylindrical shanks for milling cutters: Part 2 Dimensional characteristics of flatted cylindrical shanks(first revision)	PGD 32
311	IS 15483 : Part 2 : 2004	Optics and optical instruments - Ancillary devices for geodetic instruments: Part 2 tripods	PGD 39
312	IS 5457 : 2022	SIZES OF FOLDERS AND FILES SPECIFICATION	CHD 15
313	IS 6225 : 1971	Ship's Oval Eye Plates	TED 17
314	IS 5220 : 1969	Specification for forged horn cleats	TED 17
315	IS 3941 : 1966	Specification for cabin ventilators	TED 17
316	IS 18057 : Part 1 : 2023	Woodworking machines Safety Part 1: Common requirements	PGD 35
317	IS 6088 : 1988	Specification for oil - To - Water heat exchangers for transformers (First Revision)	MED 17
318	IS 302 : Part 1 : 2008	Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)	ETD 32
319	IS 6203 : 1971	Specification For Ship's Round Eye Plates	TED 17
320	IS 3817 : 1991	Household sewing machines - Arm shaft - Specification (First Revision)	MED 29
321	IS 8534 : Part 1 : 2017	Mine tub couplings and drawbars for use in mines: Part 1 specification	MED 8
322	IS 8442 : 2008	Stand post type water and foam monitor for fire fighting - Specification (First Revision)	CED 22
323	IS 12300 : 1988	Valve fittings for refrigerant cylinders - Specification	MED 16
324	IS 3745 : 2006	Yoke type valve connections for small medical gas cylinders - Specification (Second Revision)	MED 16
325	IS 8776 : 1988	Specification for valve fittings for use with liquefied petroleum gas (LPG) cylinders up to and including 5 - Litre water capacity (First Revision)	MED 16
326	IS 10645 : Part 7 : 2023	Statistical methods in process management Capability and performance Part 7: Capability of measurement processes	MSD 3

Classification Details

Group	:	Gases, Gas Cylinders , Machine tools and other mechanical products
Sub Group	:	Measuring and related equipments
Sub Sub Group	:	Metrological instrument
Aspect	:	Dimensions
Certification	:	None
Relevant Ministries	:
Sustainable development Goals :
Short Commom Man's Title	:	General tolerances Part 1 Tolerances for linear and angular dimensions without individual tolerance
ITC-HS Code	:	N/A
Degree of Equivalence	:	Identical under dual numbering
Identical/Equivalent International Standard(s)	:	ISO 2768-1 : 1989
Harmonized with	:	ISO

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 2102 : Part 1 : 1993

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 2102 : Part 1 : 1993

List of Expired or Cancelled Licenses under IS : IS 2102 : Part 1 : 1993

List of laboratories for : IS 2102 : Part 1 : 1993

List of Amendement(s) for : IS 2102 : Part 1 : 1993

List of Gazette Document(s) for : IS 2102 : Part 1 : 1993

List of Corigenda Document(s) for : IS 2102 : Part 1 : 1993

List of Product Manuals & SIT