Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 1865 : 1991
Reviewed In : 2020

IS Title/आईएस शीर्षक : Iron castings with spheroidal or nodular graphite - Specification (Third Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Not Equivalent

Number of Revisions/पुनरीक्षणों की संख्या : 3

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : February, 2020

Technical Department/तकनीकी विभाग : MTD (Metallurgical Engineering Department)

Technical Committee/तकनीकी समिति : MTD 06 (Pig iron and Cast iron Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. AJAY KUMAR SONI (SCIENTIST-C)

Summary/सारांश

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 0

License : 4

Click to view

Product Manual & SIT : 0

Laboratory : 2

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 1865 : 1991
Reviewed In : 2020 :

1	IS 1387 : 1993 Reviewed In : 2024	General requirements for the supply of metallurgical materials (Second Revision)	MTD 4
2	IS 1500 : 2005 IS 1500(Part 1):2013 / ISO 6506-1:2005 Reviewed In : 2010	Method for Brinell Hardness Test for Metallic Materials	MTD 3
3	IS 1608 : 2005 IS 1608:2005 / ISO 6892:1998 Reviewed In : 2017	Mechanical testing of metals - Tensile Testing	MTD 3
4	IS 1757 (Part 1) : 2020 ISO 148-1 : 2016 Reviewed In : 2020	Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )	MTD 3
5	IS 7754 (Part 2) : 2024 ISO/TR 945-2 : 2011	Method for designation of the microstructure of graphite in cast iron	MTD 22
6	IS 8350 : 1977 Reviewed In : 2020 Reaffirmed but not taken up for revision	Deviations for untoleranced dimensions of spheroidal or nodular graphite iron castings	MTD 6

International Standards Referred In IS 1865 : 1991
Reviewed In : 2020

Standard contains no Cross Referenced International Standard.

IS 1865 : 1991
Reviewed In : 2020 is Referred in following Indian Standards :

1	IS 4502 : 1999	Machine vices - Specification (First Revision)	PGD 35
2	IS 16176 : 2014	Ratchet pipe threader for taper pipe threads (R - Series) -- Specification	PGD 32
3	IS 3938 : 1983	Specification for electric wire rope hoists (Second Revision)	MED 14
4	IS 14846 : 2000	Sluice valve for water works purposes (50 To 1200 mm size) - Specification	CED 3
5	IS 5312 : Part 1 : 2004	Swing check type reflux (non-return) valves for water works purposes - Specification: Part 1 Single door pattern (second revision)	CED 3
6	IS 5312 : Part 2 : 2013	Swing Check Type Reflux (Non-Return) Valves for Water Works Purpose - Specification Part 2 : Multi-Door Pattern	CED 3
7	IS 9338 : 2013	Cast iron/S.G. Iron/Cast Steel screw-down stop valves for water works purposes - Specification (second revision)	CED 3
8	IS 6547 : 2015	Electric chain hoists - Specification (First Revision)	MED 14
9	IS 13308 : 1992	Lifting appliances - Sheaves - Technical supply condition	MED 14
10	IS 15190 : Part 1 : 2002	Acetylene pipelines - Code of practice: Part 1 for pressures up to 155 kPa (G)	MED 16
11	IS 13065 : 1991	Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements	MED 7
12	IS 5500 : Part 2 : 2004	Vibratory roller - General requirements: Part 2 self - Propelled single drum (Third Revision)	MED 7
13	IS 5500 : Part 1 : 2004	Vibratory roller - General requirements: Part 1 self - Propelled tandem drum (Second Revision)	MED 7
14	IS 2361 : 2002	Bulldog grips - Specification (Third Revision)	MED 10
15	IS 10299 : 1982	Specification for cast iron saddle pieces for service connection from asbestos cement pressure pipes	MTD 6
16	IS 1865 : 1991	Iron castings with spheroidal or nodular graphite - Specification (Third Revision)	MTD 6
17	IS 7925 : 1976	Specification for low alloy types of abrasion - Resistant iron castings	MTD 6
18	IS 3005 : Part 1 : 1979	Specification for grey cast iron ingot moulds, stools and slag ladles: Part 1 bottom stools for large size ingot moulds weighing 8 tonnes and higher (First Revision)	MTD 6
19	IS 3005 : Part 2 : 1979	Specification for grey cast iron ingot moulds, stools and slag ladles: Part 2 grey cast iron ingot moulds of mass more than eight tonnes (First Revision)	MTD 6
20	IS 3005 : Part 3 : 1982	Specification for grey cast iron ingot moulds, stools and slag laddles: Part 3 grey cast iron ingot moulds of mass more than one tonne and up to eight tonnes (First Revision)	MTD 6
21	IS 13655 : 1993	Guidelines for heat treatment of cast iron	MTD 22
22	IS 2486 : Part 1 : 1993	Metal fittings of insulators for overhead power lines with nominal voltage greater than 1 000 V - Specification: Part 1 general requirements and tests (Second Revision)	ETD 6
23	IS 14347 : 1996	Plummer block housings - Specification	PGD 13
24	IS 13197 : 1991	Grooved pipe couplings - Specification	MTD 19
25	IS 16045 : 2013	Copper alloy screw - Down stop valves and stop and check valves for marine application - Specification	TED 17
26	IS 15998 : 2013	Cast iron, spheroidal/nodular cast iron and cast steel screw - Down stop valves and stop and check valves for marine applications - Specification	TED 17
27	IS 6141 : 1971	Specification for ships single sheave blocks without becket	TED 17
28	IS 6140 : 1971	Specification for ships snatch blocks	TED 17
29	IS 6142 : 1971	Specification for ships single sheave blocks with becket	TED 17
30	IS 3894 : 1978	Specification for comb foundation mill (First Revision)	FAD 3
31	IS 13095 : 2020	Butterfly Valves for General Purposes ( First Revision )	MED 17
32	IS 9192 : 1979	Specification for flameproof hand - Held rotary electric drilling machine for use in mines	MED 8
33	IS 15905 : 2011	Hubless centrifugally cast (Spun) iron pipes, fittings and accessories - Spigot series - Specification	MTD 6
34	IS 4123 : 1982	Specification for chain pipe wrenches (First Revision)	PGD 34
35	IS 4003 : Part 1 : 1978	Specification for pipe wrenches: Part 1 general purpose (First Revision)	PGD 34
36	IS 6143 : 1971	Specification for sheaves used with ships blocks	TED 17

Classification Details

Group	:	Metals, Alloys and Metal Products (including Steel Products)
Sub Group	:	Foundry and cast iron products
Sub Sub Group	:	Pig Iron, CI Moulds, rolls & valves
Aspect	:	Product Specification
Certification	:	Voluntary Certification
Relevant Ministries	:	Ministry of Commerce and Industry - Department for Promotion of Industry and Internal Trade (DPIIT)
Sustainable development Goals :
Short Commom Man's Title	:	Iron castings with spheroidal or nodular graphite
ITC-HS Code	:
Degree of Equivalence	:	Not Equivalent
Identical/Equivalent International Standard(s)	:	ISO 1083:2018
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
2	Licensees email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 1865 : 1991

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 0

License : 4

Product Manual & SIT : 0

Laboratory : 2

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 1865 : 1991

List of Expired or Cancelled Licenses under IS : IS 1865 : 1991

List of laboratories for : IS 1865 : 1991

List of Amendement(s) for : IS 1865 : 1991

List of Gazette Document(s) for : IS 1865 : 1991

List of Corigenda Document(s) for : IS 1865 : 1991

List of Product Manuals & SIT