Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 6603 : 2024

IS Title/आईएस शीर्षक : Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â€” Specification (Second Revision)

Superseding IS/सुपरसीडिंग आईएस : IS 6603 : 2001, IS 6527 : 1995

Degree of Equivalence/समतुल्यता स्तर : Not Equivalent

Number of Revisions/पुनरीक्षणों की संख्या : 2

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : No reaffirmation

Technical Department/तकनीकी विभाग : MTD (Metallurgical Engineering Department)

Technical Committee/तकनीकी समिति : MTD 16 (Alloy Steels and Forging Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. RAM SAI KUMAR GEDELA (SCIENTIST-C)

Summary/सारांश

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 6

Click to download

License : 17

Click to view

Product Manual & SIT : 0

Laboratory : 2

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 6603 : 2024
:

1	IS 228 (Part 1) : 1987 Reviewed In : 2023	Methods for chemical analysis ofsteels: Part 1 determination ofcarbon by volumetric method (For Carbon 0.05to 2.50 Percent) (Third Revision)	MTD 34
2	IS 919 (Part 1) : 2014 ISO 286-1 : 2010 Reviewed In : 2024	Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision)	PGD 20
3	IS 1500 (Part 1) : 2019 ISO 6506-3 : 2014 Reviewed In : 2024	Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)	MTD 3
4	IS 1501 (Part 1) : 2020 ISO 6507-1 : 2018	Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision )	MTD 3
5	IS 1586 (Part 1) : 2018 Reviewed In : 2023	Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision)	MTD 3
6	IS 1599 : 2023 ISO 7438 : 2020	Metallic materials - Bend test (Fourth Revision)	MTD 3
7	IS 18215 : 2023	Metallic materials - Tensile testing - Part 1 : Method of test at room temperature	MTD 3
8	IS 1608 (Part 2) : 2020 ISO 6892-2 : 2018	Metallic Materials - Tensile Testing Part 2 Method of Test at Elevated Temperature ( Fourth Revision )	MTD 3
9	IS 1757 (Part 1) : 2020 ISO 148-1 : 2016 Reviewed In : 2020	Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )	MTD 3
10	IS 1762 (Part 1) : 1974 Reviewed In : 2024	Code for designation of steels: Part 1 based on letter symbols (First Revision)	MTD 4
11	IS 1956 (Part 3) : 2019 Reviewed In : 2024	Glossary of terms relating to iron and steel: Part 3 long products (Including Bars, Rods, Sections And Wires) (Second Revision)	MTD 4
12	IS 3711 : 2020 ISO 377 : 2017	Steel and Steel Products — Location and Preparation of Samples and Test Pieces for Mechanical Testing ( Third Revision )	MTD 3
13	IS 17895 : 2023 ISO 1942:2020	General technical delivery requirements for steel and steel products	MTD 4
14	IS/ISO/IEC 30118-5 : 2021 ISO/IEC 30118-5:2021	Steel And Steel Products â€” Inspection--Documents	MTD 4
15	IS/ISO 14284 : 1996 Reviewed In : 2021	Steel and iron - Sampling and preparation of samples for the determination of chemical composition	MTD 4
16	IS 10461 (Part 1) : 1994 Reviewed In : 2021	Resistance to inter - Granular corrosion of austenitic stainless steels - Method for determination - Part 1 : corrosion test in nitric acid medium by measurement of loss in mass (Huey Test) (First Revision)	MTD 24

International Standards Referred In IS 6603 : 2024

1	ISO 3651 : 2 : 1998

IS 6603 : 2024
is Referred in following Indian Standards :

1	IS 5290 : 1993	Landing valves - Specification (Third Revision)	CED 22
2	IS 13385 : 1992	Specification for Fire Extinguisher 50 Litre Capacity Wheel Mounted Water Type (gas Cartridge)	CED 22
3	IS 13386 : 1992	Specification for Fire Extinguisher 50 Litre Capacity , Mechanical Foam Type	CED 22
4	IS 14951 : 2001	Fire extinguisher - 135 litres capacity mechanical foam type - Specification	CED 22
5	IS 909 : 1992	Underground fire hydrant, sluice valve type - Specification (Third Revision)	CED 22
6	IS 5829 : 1982	Specification for sound, uterine (First Revision)	MHD 3
7	IS 942 : 1982	Functional requirements for 275 1/min portable pump set for fire fighting (Second Revision)	CED 22
8	IS 943 : 1979	Functional Requirements for 680-1/Min Trailer Pump For Fire Brigade Use (Second Revision)	CED 22
9	IS 4928 : 1986	Specification for delivery valve for centrifugal fire pump outlets (First Revision)	CED 22
10	IS 3642 : Part 1 : 1990	Surgical instruments - Specification: Part 1 non - Cutting, articulated instruments (Second Revision)	MHD 1
11	IS 5131 : 2002	Dividing Breeching with Control for Fire Brigade Use -Specification (Second Revision)	CED 22
12	IS 779 : 1994	Water meters (Domestic Type) - Specification (Sixth Revision)	CED 3
13	IS 7501 : 1974	Specification for speculum, rectal, kellys pattern	MHD 1
14	IS 7502 : 1974	Clamp, Intestine, Kocher's Pattern	MHD 1
15	IS 7507 : 1974	Specification for forceps, stone, bladder	MHD 1
16	IS 7521 : 1974	Dissector, Kocher's Pattern	MHD 1
17	IS 7522 : 1975	Retractor, Abdominal, Morris' Pattern	MHD 1
18	IS 7628 : 1975	Clamp, Stomach, Moynihan's Pattern	MHD 1
19	IS 7665 : 1975	Clamp, Intestine, Crushing, Lever Action, Payr's Pattern	MHD 1
20	IS 7892 : 1975	Specification for Retractor, double and single, blunt hooks	MHD 1
21	IS 7912 : 1975	Scoop, Stanley Boyd's Pattern	MHD 1
22	IS 7994 : 1976	Needle Holder, Barron's Pattern	MHD 1
23	IS 8031 : 1976	Dissector, Watson Cheyne's Pattern	MHD 1
24	IS 8253 : 1976	Lever, Bone, Bristow's Pattern	MHD 1
25	IS 8340 : 1977	Needle, Aneurism, Syme's Pattern	MHD 1
26	IS 8341 : 1977	Retractor, Goitre, Joll's Pattern	MHD 1
27	IS 8372 : 1977	Retractor, Alae, Kilner's Pattern	MHD 1
28	IS 8377 : 1977	Bougie, Lister's and Clutton's Patterns	MHD 1
29	IS 8424 : 1977	Specification for Gag, Mouth, Lane’s Pattern	MHD 1
30	IS 950 : 2012	Functional requirements for water tender, type B for fire brigade use (Third Revision)	CED 22
31	IS 8583 : 1991	Surgical instruments - Gall duct dilators, Bake's pattern	MHD 1
32	IS 8853 : 1978	Specification for retractor, cheek	MHD 1
33	IS 6957 : 1973	Specification for curette, blunt, uterine	MHD 3
34	IS 6959 : 1973	Specification for scissors, embryotomy, curved on flat	MHD 3
35	IS 7100 : 1973	Hook, Decapitation, Jardine's Pattern	MHD 3
36	IS 6067 : 1983	Functional Requirements for Water Tender Type `X' for Fire Brigade Use (First Revision)	CED 22
37	IS 7116 : 1973	Specification for forceps, midwifery, short	MHD 3
38	IS 7117 : 1973	Specification for scissors, umbilical cord	MHD 3
39	IS 7432 : 1974	Clamp, Myomectomy, Bonney's Pattern	MHD 3
40	IS 7480 : 1974	Perforator, Simpson's Pattern	MHD 3
41	IS 7484 : 1974	Retractor, Vaginal, Purandare's Pattern	MHD 3
42	IS 7725 : 1975	Hook, IUCD, Shirodkar's Pattern	MHD 3
43	IS 7736 : 1975	Specification for screw, myoma	MHD 3
44	IS 7737 : 1975	Specification for forceps, punch, cervical biopsy	MHD 3
45	IS 7981 : Part 1 : 1976	Instruments, Tuboplasty - Part I : Occluder, Cervical, Shirodkar's Pattern	MHD 3
46	IS 7981 : Part 2 : 1976	Specification For Instruments. Tuboplasty - Part II : Cannula, Shirodkar's Pattern	MHD 3
47	IS 7981 : Part 3 : 1976	Instruments, Tuboplasty - Part III : Guide, Shirodkar's Pattern	MHD 3
48	IS 7981 : Part 4 : 1976	Instruments, Tuboplasty - Part IV : Probe, Single Ended, Shirodkar's Pattern	MHD 3
49	IS 7981 : Part 5 : 1976	Instruments, Tuboplasty - Part V : Probe, Double-Ended, Shirodkar's Pattern	MHD 3
50	IS 8313 : 1977	Specification for cannula, flexible, karman type	MHD 3
51	IS 8342 : 1977	Forceps, Midwifery, Modified Kedarnath Das's Pattern, with Axis Traction	MHD 3
52	IS 8458 : 1977	Manipulators, Uterine, Dr Purandare's Pattern	MHD 3
53	IS 9756 : 1981	Specification for cups, vacuum extraction	MHD 3
54	IS 10156 : 1982	Specification for cannula, intra - Uterine, hysterosalpingography	MHD 3
55	IS 12270 : 1988	Cannula, Spackmann's Pattern	MHD 3
56	IS 12271 : 1988	Specification for laproscopic trocar and cannula	MHD 3
57	IS 12717 : 1989	Fire fighting equipment - High capacity portable pump set (1100 - 1600 L/min) - Functional requirements	CED 22
58	IS 12822 : 1989	Surgical Instruments - Forceps Intestinal Mayo-Robson's Pattern	MHD 1
59	IS 12841 : Part 1 : 1989	Surgical Instruments - Needle Holders - Part 1 : Mathieu's Pattern	MHD 1
60	IS 12841 : Part 2 : 1989	Surgical Instruments - Needle Holders - Part 2 : With Carbide Inserts, Stratte's Pattern	MHD 1
61	IS 12841 : Part 3 : 1989	Surgical Instruments - Needle Holders - Part 3 : Heaney's Pattern	MHD 1
62	IS 12841 : Part 4 : 1989	Surgical Instruments - Needle Holders - Part 4 : with Carbide Inserts, Debakey's Pattern	MHD 1
63	IS 13169 : 1991	Ent surgery instruments head mirror - Specification	MHD 4
64	IS 10272 : 1982	Specification for draffin suspension apparatus	MHD 4
65	IS 12901 : 1990	ENT surgery instruments - Laryngeal fine grasping forceps, crocodile jaws, straight - Specification	MHD 4
66	IS 12911 : 1990	ENT surgery instruments - Laryngeal forceps, oval cup - Specification	MHD 4
67	IS 10088 : 1981	Specification for retractor, dental	MHD 8
68	IS 10309 : 1982	Specification for key, torquing, edgewise	MHD 8
69	IS 10353 : 1982	Pliers, McKellops' Type, Dental	MHD 8
70	IS 10828 : 1984	Pliers, Band Contouring, Dental Johnson's Pattern	MHD 8
71	IS 10836 : Part 1 : 1984	Pliers, Loop Bending, Dental, Tweed's Pattern - Part 1 : Fixed Beak, Type 1	MHD 8
72	IS 7282 : 1975	Chisel, Labyrinth, Straight, Lake's Pattern	MHD 4
73	IS 7710 : 1975	Snare, Tonsil, Eve's Pattern	MHD 4
74	IS 7711 : 1975	Curette, Adenoid, Beckmann's Pattern	MHD 4
75	IS 7712 : 1975	Curette, Adenoid, St. Clair Thomson's Pattern	MHD 4
76	IS 7713 : 1975	Retractor, Light Model, Weislander's Pattern	MHD 4
77	IS 8093 : 1976	Curette, Ballance's pattern	MHD 4
78	IS 11317 : 1985	Specification for shears, laboratory, straight, dental	MHD 8
79	IS 11394 : 1985	Specification for pliers, distal end cutting, with safety hold, dental	MHD 8
80	IS 12507 : 1988	General requirements for dental pliers	MHD 8
81	IS 8191 : 1976	Retractor, Pillar, Anterior and Tonsil Enucleator, Mollison's Pattern	MHD 4
82	IS 8315 : 1977	Forceps, Redressing, Asch's Pattern	MHD 4
83	IS 8327 : 1977	Forceps, Nodule, Vocal, Chevalier Jackson's Pattern	MHD 4
84	IS 8343 : 1977	Forceps, Biopsy, Peterson's Pattern	MHD 4
85	IS 8344 : 1977	Snare, Aural, Glegg's Pattern	MHD 4
86	IS 8734 : 1978	Forceps, Cutting and Removing Large Specimens, Chevalier Jackson's Pattern	MHD 4
87	IS 8743 : 1994	ENT surgery instruments - Forceps, direct bronchoscopy, with alligator jaws and tenaculum points, Irwin Moore's pattern	MHD 4
88	IS 8838 : 1978	Specification for forceps, cup, straight, microlaryngeal surgery	MHD 4
89	IS 8839 : 1978	Specification for forceps,cup upwards, microlaryngeal surgery	MHD 4
90	IS 8840 : 1978	Specification for scissors, microlaryngeal surgery	MHD 4
91	IS 9014 : 1979	Specification for Raspatory fine, curved right, Zoellner's Pattern	MHD 4
92	IS 9015 : 1979	Raspatory, Fine, Curved Left, Zoellner's Pattern	MHD 4
93	IS 9016 : 1979	Needle, Fine, Spear Pointed, Curved Right, Zoellner's Pattern	MHD 4
94	IS 9017 : 1979	Needle, Fine, Spear Pointed, Curved Left, Zoellner's Pattern	MHD 4
95	IS 9060 : 1979	Hook, Small, Zoellner's Pattern	MHD 4
96	IS 9558 : 1980	Specification for gauge, depth, ptfe (Teflon) piston	MHD 4
97	IS 9718 : 1981	Specification for jig, cutting, ptfe piston	MHD 4
98	IS 4622 : 2020	Recommendations for Structural Design of Fixed-Wheel Gates ( Fourth Revision )	WRD 12
99	IS 4623 : 2000	Recommendations for structural design of radial gates (Third Revision)	WRD 12
100	IS 944 : 1979	Functional requirements of 1800-1/min trailer pump for fire brigade use (Second Revision)	CED 22
101	IS 8314 : 1977	Forceps, Midwifery, Modified Kedarnath Das' Pattern, without Axis Traction	MHD 3
102	IS 10045 : 1981	Specification For Punch, Lacrymal Bone, Beyer's Pattern	MHD 5
103	IS 10058 : 1985	Specification For Forceps, Fixation, Graefe's Pattern (Modified) (First Revision)	MHD 5
104	IS 10389 : 1983	Specification For Fixation Hook, Eye, Guthrie's Pattern	MHD 5
105	IS 10390 : 1983	Specification for muscle hook	MHD 5
106	IS 10408 : 1983	Specification For Spatula, Eye, Green's Pattern	MHD 5
107	IS 11244 : 1985	Specification for trephine, bone lacrimal with handle	MHD 5
108	IS 4569 : Part 1 : 1985	Specification for scissors, eye: Part 1 corneal (Second Revision)	MHD 5
109	IS 4569 : Part 2 : 1985	Specification for scissors, eye: Part 2 conjuctival, blunt and sharp - Point scissors (Second Revision)	MHD 5
110	IS 4569 : Part 3 : 1985	Specification for scissors, eye: part 3 scissors, tenotomy (Second Revision)	MHD 5
111	IS 4569 : Part 4 : 1985	Specification For Scissors, Eye Part 4 Scissors,Enucleation (Second Revision)	MHD 5
112	IS 4569 : Part 5 : 1985	Specification For Scissors, Eye Part 5 Scissors, Spring Action, Vanna's Pattern (Modified) (Second Revision)	MHD 5
113	IS 4569 : Part 6 : 1985	Specification For Scissors, Eye Part 6 Scissors, Iris (Second Revision)	MHD 5
114	IS 5157 : 1981	Specification for forceps, eye, Iris (First Revision)	MHD 5
115	IS 6420 : 1989	Eye Surgery Instruments - Retractor, Eye Lachrymal Sac, Muller's Pattern (Modified) - Specification (First Revision)	MHD 5
116	IS 7734 : 1975	Specification For Forceps, Eys, Peripheral Iridectomy, Traquair's Pattern	MHD 5
117	IS 7758 : 1975	Specification For Curette, Eye, Evacuation, Moorfield's Pattern	MHD 5
118	IS 7762 : 1975	Specification for hook, eyelid	MHD 5
119	IS 7767 : 1975	Specification For Spatula, Eye, Cyclodialysis, Sinclair's Pattern	MHD 5
120	IS 7786 : 1975	Specification For Retractor, Eyelid, Desmarre's Pattern	MHD 5
121	IS 8106 : 1976	Specification For Needle Holder, Eye, Kalt's Pattern	MHD 5
122	IS 8109 : 1976	Specification For Needle Holder, Eye, Castroviejo's Pattern	MHD 5
123	IS 8181 : 1976	Specification for repositor, Iris	MHD 5
124	IS 8771 : 1985	Specification For Needle Holder, Eye, Scissors And Forceps Combined, Castroviejo's Pattern (Modified) (First Revision)	MHD 5
125	IS 8772 : 1985	Specification For Needle Holder, Eye, Barraquer's Pattern (Modified) (First Revision)	MHD 5
126	IS 8773 : 1985	Specification For Dissector, Lacrimal Sac, Lang's Pattern (Modified) (First Revision)	MHD 5
127	IS 8810 : 1985	Specification For Rougine For Lacrimal Sac, Rollet's Pattern (Modified) (First Revision)	MHD 5
128	IS 9061 : 1989	Eye Surgery Instruments - Dilators, Punctum, Wilder's Pattern (Modified) - Specification (First Revision)	MHD 5
129	IS 9134 : 1987	Specification For Trephine, Corneal, Castroviejo's Pattern (Modified) (First Revision)	MHD 5
130	IS 9329 : 1987	Specification For Speculum, Eye, Clark's Pattern (Modified) (First Revision)	MHD 5
131	IS 14845 : 2000	Resilient seated cast iron air relief valves for water works purposes - Specification	CED 3
132	IS 9378 : 1987	Specification For Speculum, Eye, Castroviejo's Pattern (Modified) (First Revision)	MHD 5
133	IS 9688 : 1992	Eye surgery instruments - Hooks, strabismus - Specification ( first revision)	MHD 5
134	IS 9983 : 1981	Specification for wire vectis and lens expressor, eye	MHD 5
135	IS 6436 : 1989	Thoracic Surgery Instruments - Rib Spreader, Finochietto's Pattern, Adult Size	MHD 6
136	IS 2963 : 2013	Copper Alloy Waste Fittings and Waste Plug for Wash Basin and Sinks - Specification (second revision) (amalgamating IS 3311)	CED 3
137	IS 6777 : 1989	Thoracic and cardiovascular surgery instruments - Forceps, dissecting, lung - Specification (First Revision)	MHD 6
138	IS 4038 : 1986	Specification for foot valves for water works purposes (second revision)	CED 3
139	IS 7367 : 1987	Clamps, Coarctation, Potts' Pattern, Straight and Angular	MHD 6
140	IS 5312 : Part 1 : 2004	Swing check type reflux (non-return) valves for water works purposes - Specification: Part 1 Single door pattern (second revision)	CED 3
141	IS 7399 : 1987	Knife, Sternum, Lebsche's Pattern	MHD 6
142	IS 7971 : 1987	Tourniquet, Cardiovascular Rumel-Belmont's Pattern	MHD 6
143	IS 5312 : Part 2 : 2013	Swing Check Type Reflux (Non-Return) Valves for Water Works Purpose - Specification Part 2 : Multi-Door Pattern	CED 3
144	IS 9338 : 2013	Cast iron/S.G. Iron/Cast Steel screw-down stop valves for water works purposes - Specification (second revision)	CED 3
145	IS 8345 : 1994	Cardiovascular surgery instruments - Clamps, bulldog, cross action type - Specification (First Revision)	MHD 6
146	IS 8409 : 1991	Cardiovascular Surgery Instruments - Dilator, Valve, Tubb's Mitral Pattern	MHD 6
147	IS 9928 : 1981	Clamp, Aortic, DeBakey's Pattern (Spoon Shaped angled Jaw)	MHD 6
148	IS 10172 : 1982	Specification for burs and perforators for drill brace	MHD 7
149	IS 8334 : 1977	Rongeur, Cranial, Dahlgren's Pattern	MHD 7
150	IS 8695 : 1978	Forceps, Dressing, Bayonet Shape, Cushing's Pattern	MHD 7
151	IS 15083 : 2001	Water swivel for use with diamond core drilling - Requirements	MED 21
152	IS 12225 : 1997	Centrifugal jet pump - Specification (First Revision)	MED 20
153	IS 15275 : 2003	Padlocks - Specification	MED 33
154	IS 14561 : 2014	Fire resisting (Insulating) filing cabinets - Specification (Second Revision)	MED 24
155	IS 8418 : 1999	Pumps - Centrifugal self priming - Specification (First Revision)	MED 20
156	IS 5600 : 2002	Pumps - Sewage and drainage - Specification (First Revision)	MED 20
157	IS 15879 : 2009	Breathing air compressor package - Specification	MED 22
158	IS 13718 : Part 2 : 1993	Horology -- Watch straps: Part 2 Stainless steel -- Specification	PGD 23
159	IS 10605 : 1989	Steel globe valves (Flanged And Butt Welded Ends) for petroleum, petrochemical and allied industries - Specification (First Revision)	MED 17
160	IS 11196 : 1985	Specification for equipment for determination of liquid limit of soils cone penetration met - Hod	CED 43
161	IS 12175 : 1987	Specification for rapid moisture meter for rapid determination of water content for soil	CED 43
162	IS 3888 : 1987	Specification for spatula, stainless steel, dental (First Revision)	MHD 8
163	IS 3890 : Part 1 : 1986	Specification for instruments, plastic filling, dental: Part 1 designation numbers 1, 3, 4, 5 and 6 (First Revision)	MHD 8
164	IS 4319 : Part 2 : 1986	Specification for pliers, stretching and contouring, dental: Part 2 pliers, contouring (First Revision)	MHD 8
165	IS 4975 : 1986	Specification for elevators, dental, No. 1, 2 and 3 (First Revision)	MHD 8
166	IS 4976 : 1987	Specification for forceps extraction, dental, upper anteriors, No. 1 and 2 (First Revision)	MHD 8
167	IS 5179 : 1986	Specification for pluggers, root canal, dental, No. PLG 1, 2 and 3 (First Revision)	MHD 8
168	IS 5576 : 1985	Specification for carriers, amalgam, dental, No. 1 and 2 (First Revision)	MHD 8
169	IS 5582 : 1986	Specification for mandrels, dental, No. 1, 2 and 3 (First Revision)	MHD 8
170	IS 5794 : 1986	Specification - For pliers, pin - Roughening and bending, dental (First Revision)	MHD 8
171	IS 6866 : 1986	Specification for forceps, extraction, dental, upper wisdom tooth (First Revision)	MHD 8
172	IS 6868 : 1991	Dental instruments - Dental extraction forceps - Specification (First Revision)	MHD 8
173	IS 6870 : 1986	Specification for pliers, loop bending, dental (First Revision)	MHD 8
174	IS 7335 : 1974	Specification for pliers, closing loop, nance type, dental	MHD 8
175	IS 7340 : 1974	Specification for pliers, pin and ligature cutting, dental	MHD 8
176	IS 7474 : 1986	Specification for pliers, collar, dental (First Revision)	MHD 8
177	IS 7627 : 1975	Gag, Mouth, Mason's Pattern	MHD 8
178	IS 7676 : 1975	Specification for chisel, osseous, dental	MHD 8
179	IS 7780 : 1975	Specification for pliers, ligature forming, dental	MHD 8
180	IS 7781 : 1975	Specification for pliers, angle ribbon arch with groove, dental	MHD 8
181	IS 7833 : 1975	Specification for knives, Gingivectomy, Dental	MHD 8
182	IS 8044 : 1976	Specification for forceps, extraction, dental, lower molar, children	MHD 8
183	IS 8045 : 1976	Specification for forceps, extraction, dental, lower incisors and canines, children	MHD 8
184	IS 8046 : 1976	Specification for forceps, extraction, dental, upper incisors and canines, children	MHD 8
185	IS 8047 : 1976	Specification for forceps, extraction, dental, upper molar, children	MHD 8
186	IS 8207 : 1976	Specification for forceps, rongeur, dental	MHD 8
187	IS 8283 : 1976	Specification for tweezers, soldering	MHD 8
188	IS 8284 : 1976	Pusher, Band, Dental, Mershon's Pattern	MHD 8
189	IS 8287 : 1986	Specification for pliers, band stretching and contouring, parrot beak, dental (First Revision)	MHD 8
190	IS 8527 : 1977	Specification for tweezers, extraction, dental	MHD 8
191	IS 9699 : 1981	Specification for chisel, dental, large	MHD 8
192	IS 9774 : 1981	Specification for pliers, bracket opening, dental	MHD 8
193	IS 2486 : Part 1 : 1993	Metal fittings of insulators for overhead power lines with nominal voltage greater than 1 000 V - Specification: Part 1 general requirements and tests (Second Revision)	ETD 6
194	IS 10110 : 1982	Specification for table spoon terminal device for artificial limbs	MHD 9
195	IS 10111 : 1982	Specification for table fork terminal device for artificial limbs	MHD 9
196	IS 10926 : 1984	Specification for tweezer terminal device for artificial limbs	MHD 9
197	IS 14762 : 1999	Fishing vessels - Selection of propeller shafts for mechanized fishing boats - Guidelines	TED 18
198	IS 11313 : 2007	Hydraulic Power Sprayers - Specification (First Revision)	FAD 11
199	IS 7625 : 1975	Gag, Mouth, Doyen's Pattern	MHD 11
200	IS 7885 : 1985	Spray, Macintosh's Pattern	MHD 11
201	IS 8312 : 1977	Forceps, Introducing, Endotracheal Tube, Magill's Pattern	MHD 11
202	IS 7858 : 1991	Surgical microscope - Specification (First Revision)	MHD 1
203	IS 7531 : 1990	Surgical instruments - Corrosion resistance of stainless steel surgical instruments - Methods of tests (First Revision)	MHD 1
204	IS 6976 : 1973	Specification for awl, kuntscher, diamond pointed	MHD 2
205	IS 7055 : 1973	Specification for drivers, kuntscher, nail, orthopaedic	MHD 2
206	IS 7105 : Part 1 : 1973	Specification for extractor for kuntscher nail Part 1 handle type	MHD 2
207	IS 7105 : Part 2 : 1986	Specification for extractor for kuntscher nail: Part 2 striker type	MHD 2
208	IS 7106 : 1973	Specification for extractor, staple, orthopaedic	MHD 2
209	IS 7107 : 1973	Specification for punch, staple, orthopaedic	MHD 2
210	IS 7108 : 1973	Specification for hammer for kuntscher nail extractor	MHD 2
211	IS 7109 : 1973	Specification for starter, staple, orthopaedic	MHD 2
212	IS 7111 : 1973	Specification for inserter, staple, orthopaedic	MHD 2
213	IS 7435 : 1974	Rongeur, Ruskin's Pattern	MHD 2
214	IS 7442 : 1974	Forceps, Bone Cutting, Straight and Angular, Liston's Pattern	MHD 2
215	IS 7629 : 1975	Specification for bender, plate, orthopaedic	MHD 2
216	IS 7818 : 1975	Specification for broach, moore type, for hip prosthesis	MHD 2
217	IS 7846 : 1975	Specification for extractor for Hip Prosthesis	MHD 2
218	IS 8326 : 1977	Starter, Smith Peterson Nail, Orthopedic	MHD 2
219	IS 8608 : 1977	Specification for countersinks, pilot type, for orthopaedic use	MHD 2
220	IS 8922 : 1978	Specification for depth gauge for orthopaedic use	MHD 2
221	IS 16045 : 2013	Copper alloy screw - Down stop valves and stop and check valves for marine application - Specification	TED 17
222	IS 15998 : 2013	Cast iron, spheroidal/nodular cast iron and cast steel screw - Down stop valves and stop and check valves for marine applications - Specification	TED 17
223	IS 14798 : 2000	Aerospace - Self - Locking, fixed, single - Lug anchor nuts with counterbore, classification 1100 mpa/235 degree C - Specification	TED 14
224	IS 14799 : 2000	Aerospace - Nuts, anchor, self - Locking, floating two - Lug, with counterbore with mj threads, coated or uncoated, classification 1100 mpa/235"C, 1100 mpa/315"C and 1 100 mpal425"C - Specification	TED 14
225	IS 14824 : 2000	Aerospace - Self - Locking, fixed, single - Lug anchor nuts, reduced series, with counterbore, with MJ threads, strength classification 1100 mpa/235° C - Specification	TED 14
226	IS 10009 : 1981	Specification For Breaker And Holder, Razor Blade, Barraquer's Pattern	MHD 5
227	IS 6779 : 1989	Thoracic Surgery Instruments - Forceps, Dissecting and Ligature, Mixter's Pattern - Specification (First Revision)	MHD 6
228	IS 3624 : 1987	Specification for pressure and vacuum gauges (Second Revision)	ETD 18
229	IS 9079 : 2018	Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision)	MED 20
230	IS 8034 : 2018	Submersible pumpsets - Specification (Third Revision)	MED 20
231	IS 6595 : Part 1 : 2018	Horizontal centrifugal pumps for clear, cold water - Specification: Part 1 agricultural and rural water supply purposes (Fourth Revision)	MED 20
232	IS 8472 : 2019	Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision)	MED 20
233	IS 9516 : 1980	Specification for heat resisting steels	MTD 16
234	IS 13095 : 2020	Butterfly Valves for General Purposes ( First Revision )	MED 17
235	IS 15500 : Part 1 to 8 : 2004	Deepwell handpumps, components and special tools - Specification	MED 27
236	IS 16323 : 2017	SHIPS AND MARINE TECHNOLOGY - MARINE MAGNETIC COMPASSES, BINNACLES AND AZIMUTH READING DEVICES	TED 19
237	IS/ISO/IEC 20547 : Part 3 : 2020	Information technology Big data reference architecture Part 3: Reference architecture	LITD 30
238	IS/ISO 12812 : Part 1 : 2017	Core banking- Mobile financial services- Part 1: General framework	SSD 3
239	IS 15934 : Part 4 : 2021	Liquid Crystal and Solid State Display Devices Part 4 Liquid Crystal Display Modules and Cells Essential Ratings and Characteristics	LITD 4
240	IS 15934 : Part 4 : Sec 1 : 2021	Liquid Crystal Display Devices Part 4 Matrix Colour LCD Modules Section 1 Essential ratings and characteristics	LITD 4
241	IS 4768 : 1981	Specification for stainless steel buckets (First Revision)	MED 33
242	IS 13036 : 1991	Textiles – Apparatus for testing colour fastness of textile materials to washing, laundering and dry-cleaning – Specification	TXD 5
243	IS 17675 : Part 4 : 2021	Guidelines for Treated Wastewater Use for Irrigation Projects Part 4 Monitoring	EED 2
244	IS/ISO 20932 : Part 1 : 2018	Textiles - Determination of the elasticity of fabrics Part 1 Strip tests	TXD 1
245	IS/IEC 60721 : Part 3 : Sec 3 : 2019	Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 3 Stationary use at weatherprotected locations	LITD 1
246	IS 11228 : 1985	Recommendations for design of screw hoists for hydraulic gates	WRD 12
247	IS 9410 : Part 1 : 1980	Specification for silver clip set: Part 1 forceps, clip cutting and forming	MHD 7
248	IS 9410 : Part 2 : 1980	Specification for silver clip set: Part 2 forceps, clip applying	MHD 7
249	IS 9410 : Part 3 : 1981	Specification for silver clip set: Part 3 rack, clip	MHD 7
250	IS 9903 : 1981	Specification for brace, skull	MHD 7
251	IS 9904 : 1981	Specification for hooks, dural	MHD 7
252	IS 9041 : 1979	Specification for elevator, periosteal	MHD 7
253	IS 9074 : 1979	Specification for raney clips and clip applicator	MHD 7
254	IS 8380 : 1977	Rongeur, Double-Action, Olivecrona's Pattern	MHD 7
255	IS 9072 : 1979	Specification for rongeur, pituitary	MHD 7
256	IS 8799 : 1978	Specification for rongeur, kerrison	MHD 7
257	IS 13180 : 1991	Neurosurgical instruments - Scoville trephine - Specification	MHD 7
258	IS 2347 : 2017	Domestic pressure cooker - Specification (Sixth Revision)	MED 33
259	IS 8176 : 1976	Dissectors, Penfield's Pattern	MHD 7
260	IS 8926 : 1978	Bone Skid, Murphy Lane's Pattern	MHD 2
261	IS 9265 : 1979	Clamp, Compression, Muller's Pattern	MHD 2
262	IS 9914 : 1981	Calipers, Ice Tong, Cone's Pattern	MHD 7
263	IS 10174 : 1982	Tongs, skull Traction, Crutchfield's Pattern	MHD 7
264	IS 13141 : 1991	Neurosurgical Instruments-Leksell's Rongeur	MHD 7
265	IS 17885 : Part 1 : 2022	Automation systems and integration Digital twin framework for manufacturing Part 1: Overview and general principles	PGD 18
266	IS 11631 : 1985	Specification for gambrels for sheep and goats	FAD 18
267	IS 5232 : 1990	Eye Surgery Instruments - Forceps, Eye, Cilia, Beer's Pattern (Modified) - Specification (Second Revision)	MHD 5
268	IS 5668 : 1989	Eye surgery instruments - Forceps, eye, dissecting, serrated, fine specification (First Revision)	MHD 5
269	IS 9058 : 1979	Knife, Upward Cutting, Zoellner's Pattern	MHD 4
270	IS 9059 : 1979	Knife, Downward Cutting, Zoellner's Pattern	MHD 4
271	IS 9479 : 1980	Specification for Hook, Fenestra, 25°, 45° and 90° Angle Ear, Shea's Pattern	MHD 4
272	IS 9480 : 1980	Elevators, Left and Right, Ear, Shea's Pattern	MHD 4
273	IS 10344 : 1982	Specification for gag frame, davis - Boyle, and tongue plates	MHD 4
274	IS 10725 : 1983	Specification for knife, myringotomy	MHD 4
275	IS 10726 : 1983	Specification for knife, meatal skin incision	MHD 4
276	IS 10846 : 1984	Speculum, Nasal, Killian's Pattern	MHD 4
277	IS 3807 : 2000	Ent surgery instruments - Forceps, dressing, aural and nasal - Specification (First Revision)	MHD 4
278	IS 8129 : 1976	Forceps, Tonsil Artery, Curved, Scott's Pattern	MHD 4
279	IS 9526 : 1980	Specification for scissors, stapedectomy, crocodile jaw	MHD 4
280	IS 9544 : 1980	Specification for forceps, stapedectomy, round cup, elongated cup and oval cup jaws	MHD 4
281	IS 9564 : 1980	Specification for forceps, stapedectomy, serrated, smooth and Mc Gee wire closing jaws	MHD 4
282	IS 9984 : 1981	Specification for cannula, air injection, eye	MHD 5
283	IS 10848 : 1984	Specification For Irrigator Anterior Chamber, Eye, Bishop Harmann's Pattern	MHD 5
284	IS 181 : 2022	Textiles ÃƒÂ¢Ã¢â€šÂ¬Ã¢â‚¬Å“ Leopard Cloth ÃƒÂ¢Ã¢â€šÂ¬Ã¢â‚¬Å“ Specification (third revision)	TXD 31
285	IS 181 : 2022	Textiles ÃƒÂ¢Ã¢â€šÂ¬Ã¢â‚¬Å“ Leopard Cloth ÃƒÂ¢Ã¢â€šÂ¬Ã¢â‚¬Å“ Specification (third revision)	TXD 31
286	IS 9555 : 1999	Rice Polisher - Specification (Second Revision)	FAD 20
287	IS 11620 : 1986	Code of practice for fluid bed dryer	MED 17
288	IS 7346 : 1987	Raspatories, Rib, Semb's Pattern	MHD 6
289	IS 7382 : 1987	Shears, Rib, Price Thomas' Pattern	MHD 6
290	IS 10937 : 1984	Specification for nose ring and key, bull	MHD 13
291	IS 10938 : 1984	Specification for searcher, double edged with handle and sheath	MHD 13
292	IS 10955 : 1984	Specification for gimlet for trephine	MHD 13
293	IS 11566 : 1986	Specification for valve retractors	MHD 6
294	IS 12329 : 1988	Specification for self - Centring bone holding forceps	MHD 13
295	IS 12344 : 1988	Specification for reduction forceps	MHD 13
296	IS 7379 : 1987	Clamps, Patent Ductus, Potts' Pattern, Straight and Angular	MHD 6
297	IS 7972 : 1987	Scissors, Dissecting, Metzenbaum's Pattern	MHD 6
298	IS 10677 : 1983	Specification for rongeur, intervertebral disk	MHD 7
299	IS 6395 : 1989	Thoracic Surgery Instruments - Clamps, Auricle, Crafoord's Pattern	MHD 6
300	IS 6442 : 1989	Thoracic Surgery Instruments - Shears, Rib, Tudor Edward's Pattern for Posterior End of Ribs - Specification(First Revision)	MHD 6
301	IS 6466 : 1989	Thoracic and cardiovascular surgery instruments - Needle holders - Specification (First Revision)	MHD 6
302	IS 6467 : 1989	Thoracic Surgery Instruments - Periosteotome, Rib, Alexander's Pattern	MHD 6
303	IS 6468 : 1989	Thoracic Surgery Instruments - Trocar, Empyema, Nelson's Pattern	MHD 6
304	IS 6778 : 1989	Thoracic Surgery Instruments - Forceps, Lung, Duval's Pattern	MHD 6
305	IS 6778 : 1989	Thoracic Surgery Instruments - Forceps, Lung, Duval's Pattern	MHD 6
306	IS 6780 : 1989	Thoracic Surgery Instruments - Forceps, Artery, Robert's Pattern, Curved on Flat	MHD 6
307	IS 7355 : 1987	Spreader, Rib, Tuffier's Pattern, Adult Size	MHD 6
308	IS 7434 : 1987	Retractor, Scapula, Tudor Edward's Pattern	MHD 6
309	IS 8549 : 1991	Cardiovascular surgery instruments - Angled scissors, potts smith pattern - Specification (First Revision)	MHD 6
310	IS 9950 : 1981	Specification for clamp, vascular, wister pattern	MHD 6
311	IS 9951 : 1981	Specification for scissors, blunt end, nelson pattern	MHD 6
312	IS 9987 : 1981	Clamps, Multipurpose, De-bakey's Pattern	MHD 6
313	IS 9408 : 1986	Specification for retractor, self retaining (First Revision)	MHD 7
314	IS 10765 : 1983	Forceps, Dissecting, Toothed and Bayonet Shaped, Cushing's Pattern	MHD 7
315	IS 12245 : 1988	Specification for dilators, teat (Hudson)	MHD 13
316	IS 14106 : 2018	Direct action hand pumps - Specification (First Revision)	MED 27
317	IS 3887 : 1978	General requirements for cutting type dental instruments (First Revision)	MHD 8
318	IS 10183 : 1982	Specification for retractor, deep, self - Retaining, laminectomy	MHD 7
319	IS 10568 : 1983	Specification for knife, teat, McLean	MHD 13
320	IS 6595 : Part 2 : 1993	Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply) - Specification (Second Revision)	MED 20
321	IS 9003 : 1978	Specification for acrylizer (Curing Unit)	MHD 8
322	IS 8442 : 2008	Stand post type water and foam monitor for fire fighting - Specification (First Revision)	CED 22
323	IS 8251 : 1976	Specification for commercial cooking ranges including grillers for use with liquefied petroleum gases	MED 23

Classification Details

Group	:	Metals, Alloys and Metal Products (including Steel Products)
Sub Group	:	Steel and Steel Castings, Wires, Ropes, Pipes , Tubes and other products
Sub Sub Group	:	Hot rolled steel sheet & plates
Aspect	:	Product Specification
Certification	:	Voluntary Certification
Relevant Ministries	:
Sustainable development Goals :
Short Commom Man's Title	:	Stainless steel bars and flats
ITC-HS Code	:
Degree of Equivalence	:	Not Equivalent
Identical/Equivalent International Standard(s)	:	ISO I6143-2
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
2	Licensees email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 6603 : 2024

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 6

License : 17

Product Manual & SIT : 0

Laboratory : 2

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 6603 : 2024

List of Expired or Cancelled Licenses under IS : IS 6603 : 2024

List of laboratories for : IS 6603 : 2024

List of Amendement(s) for : IS 6603 : 2024

List of Gazette Document(s) for : IS 6603 : 2024

List of Corigenda Document(s) for : IS 6603 : 2024

List of Product Manuals & SIT