Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 919 (Part 1) : 2014
ISO 286-1 : 2010
Reviewed In : 2024

IS Title/आईएस शीर्षक : Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : 1

Aspect/पक्ष : Dimensions

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : April, 2024

Technical Department/तकनीकी विभाग : PGD (Production and General Engineering Department)

Technical Committee/तकनीकी समिति : PGD 37 (General Engineering and Fasteners Standards Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. MONARCH JOSHI (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 1

Click to download

Gazette Document : 1

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 919 (Part 1) : 2014
ISO 286-1 : 2010
Reviewed In : 2024 :

Details could not be found.

International Standards Referred In IS 919 (Part 1) : 2014
ISO 286-1 : 2010
Reviewed In : 2024

1	ISO 14405 : 1 : 2010
2	ISO 14660 : 1 : 1999
3	ISO 14660 : 2 : 1999
4	ISO 286 : 0 : 0 0

IS 919 (Part 1) : 2014
ISO 286-1 : 2010
Reviewed In : 2024 is Referred in following Indian Standards :

1	IS 800 : 2007	General construction in steel - Code of practice (Third Revision)	CED 7
2	IS 3382 : 1965	Specification for stainless steel milk pipes and - Fittings	FAD 33
3	IS 4623 : 2000	Recommendations for structural design of radial gates (Third Revision)	WRD 12
4	IS 8711 : 2002	Gap frame open front mechanical presses - Capacity ratings and dimensions (First Revision)	PGD 4
5	IS 5443 : 1994	High speed steel reamers - Technical supply conditions (Second Revision)	PGD 32
6	IS 10923 : 1994	Carbide tipped and solid carbide reamers - Technical supply conditions (First Revision)	PGD 32
7	IS 10102 : 1982	Technical supply conditions for rivets	PGD 37
8	IS 1691 : 1980	Specification for cast iron and mild steel flat pulleys (Second Revision)	PGD 40
9	IS 14393 : 1996	Shipbuilding - Derrick boom heel fittings - Main dimensions	TED 17
10	IS 13584 : 1993	Brush materials for electrical machinery - Specification	ETD 15
11	IS 14418 : 1996	Bulk handling equipment - Ship loader - Rail mounted - Design, manufacture and erection - Code of practice	MED 7
12	IS 14417 : 1996	Bulk handling equipment - Single boom slewable stacker - Rail mounted - Design, manufacture and erection - Code of practice	MED 7
13	IS 14416 : 1996	Bulk handling equipment - Boom type bucket wheel reclaimer - Rail mounted - Design, manufacture and erection - Code of practice	MED 7
14	IS 13082 : Part 1 : 1991	Bulk handling equipment - Ship unloader - Gantry mounted grab type - Code of practice for design, manufacture and erection:: Part 1 mechanical and structural requirements	MED 7
15	IS 13360 : Part 2 : Sec 1 : 2016	Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 1 plastics - Compression moulding of test specimens of thermoplastic materials (First Revision)	PCD 27
16	IS 13096 : 2000	Fasteners - Hexagon nuts with specified proof load values - Fine pitch thread - Mechanical properties (First Revision)	PGD 37
17	IS/IEC 61757 : PART 1 : 1998	Fibre optic sensors: Part 1 generic specification	LITD 11
18	IS 1367 : Part 2 : 2002	Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision)	PGD 37
19	IS 6834 : Part 2 : 1976	Specification for conveyor chains, chain - Wheels and attachments: Part 2 chain - Wheels	MED 6
20	IS 4888 : Part 1 : 2002	Textile machinery and accessories – Cones for cross winding Part 1Dimensions, tolerances and designation of cones with half angle of the cone 30 30' (third revision)	TXD 14
21	IS 4888 : Part 2 : 2002	Textile machinery and accessories – Cones for cross winding Part 2 Dimensions, tolerances and designation of cones with half angle of the cone 40 20' (third revision)	TXD 14
22	IS 4888 : Part 3 : 2002	Textile machinery and accessories – Cones for cross winding Part 3 Dimensions, tolerances and designation of cones with half angle of the cone 50 57' (third revision)	TXD 14
23	IS 11465 : 1985	Technical supply conditions for reciprocating air compressors for power upto 25 kW for general purpose and industrial applications	MED 22
24	IS 14761 : 2000	Link type thread take up lever sub assembly for industrial sewing machines - Specification	MED 29
25	IS 12673 : Part 1 : 2014	Textiles â€” Determination of the Abrasion Resistance of Fabrics by the Martindale Method Part 1 Martindale Abrasion Testing Apparatus (first revision)	TXD 1
26	IS 8841 : 1978	Recommendations for limits and flTs for sizes above 3 i50 mm up to io 000 mm	PGD 37
27	IS 919 : Part 2 : 2014	Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision)	PGD 37
28	IS 11164 : 1992	Photography - Front Lens Barrels Up To 127 Mm Dimensions Important To The Connection Of Auxiliaries	MED 32
29	IS 15383 : 2003	Textile machinery and accessories – Cones for cross winding – Dimensions, tolerances and designation of cones with half angle 40 2’ for winding for dyeing purposes	TXD 14
30	IS 14640 : Part 1 : 1998	Graphic technology - Register systems for photographic materials, foils and paper: Part 1 three - Pin systems	MED 25
31	IS 3980 : 1982	Specification for porous metal powder oil -- Impregnated bearings (First Revision)	PGD 13
32	IS 13547 : Part 1 : 2010	Manipulating industrial robots -- Mechanical interfaces: Part 1 Plates (second revision)	PGD 18
33	IS 13547 : PART 2 : 2010	Manipulating industrial robots -- Mechanical interfaces: Part 2 Shafts (first revision)	PGD 18
34	IS 12160 : 2015	Geometrical product specifications (GPS) -- Fundamentals --Concepts, principles and rules (First Revision)	PGD 24
35	IS 14271 : 1995	Engineering metrology - Dial snap gauges - Specification	PGD 25
36	IS 3455 : 1971	Gauging practice for plain workpieces (First Revision)	PGD 25
37	IS 4966 : Part 1 : 1969	Specification for gauges for serrations: Part 1 for gauging external serrations	PGD 25
38	IS 4966 : Part 2 : 1969	Specification for gauges for serrations: Part 2 for gauging internal serrations	PGD 25
39	IS 6137 : 1983	Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision)	PGD 25
40	IS 6244 : 1980	Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision)	PGD 25
41	IS 7018 : Part 2 : 1983	Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision)	PGD 25
42	IS 10187 : 2013	Hydraulic fluid power - Four - Port directional control valves - Mounting surfaces (Second Revision)	PGD 36
43	IS 7411 : Part 2 : 1974	Ships' Intermediate Shafts (Integral Flange) - Part II : For Sea-going Vessels	TED 19
44	IS 15432 : 2003	Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications	PGD 36
45	IS/ISO 7425 : PART 2 : 1989	Hydraulic fluid power - Housings for elastomer - Energized, plastic - Faced seals - Dimensions and tolerances: Part 2 rod seal housings	PGD 36
46	IS 1850 : 1961	Dimensions for shank diameters and driving squares for rotating tools	PGD 32
47	IS 3688 : 1990	Power transmission - Shafts - Dimensions for cylindrical and 1/10 conical shaft ends (Second Revision)	PGD 33
48	IS 4696 : Part 4 : 2005	Dimensions for metric buttress threads: Part 4 tolerancing system (Second Revision)	PGD 37
49	IS 5803 : 1970	Specification for twist drill used in orthopaedic surgery	MHD 2
50	IS 13090 : 2018	Automotive vehicles - Commercial vehicles - Clutch housings - Dimensions (First Revision)	TED 2
51	IS 6982 : 1973	Specification for gauge for intramedullary nails	MHD 2
52	IS 14824 : 2000	Aerospace - Self - Locking, fixed, single - Lug anchor nuts, reduced series, with counterbore, with MJ threads, strength classification 1100 mpa/235° C - Specification	TED 14
53	IS/IEC 60876 : Part 1 : 2014	Fibre optic interconnecting devices and pass4e components - Fibre optic spatial switches: Part 1 generic specification (First Revision)	LITD 11
54	IS/IEC 60875 : Part 1 : 2015	Fibre optic interconnecting devices and pass4e components - Non - Wavelength - Select4e fibre optic branching devices: Part 1 generic specification	LITD 11
55	IS 17239 : 2019	Safety Requirements for Drives Used for Ropeway Installation for Passenger Transportation	MED 6
56	IS 11027 : Part 1 : 2019	Rolling Bearing â€” Tolerances Part 1 Terms and Definitions ( First Revision )	PGD 13
57	IS 17204 : 2019	Precision Superabrasives â€” Limit Deviations and Run-out Tolerances for Grinding Wheels with Diamond or Cubic Boron Nitride	PGD 9
58	IS 1757 Part 1 : 2020	Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )	MTD 3
59	IS/ISO 8239 : 1987	Sewing Machine Needles - Fitting Dimensions - Tolerances and Combinations	MED 29
60	IS/ISO 10821 : 2005	Industrial Sewing Machines - Safety Requirements for Sewing Machines, Units and Systems	MED 29
61	IS/IEC 60874 : Part 1 : 2011	Fibre Optic Interconnecting Devices and Passive Components â€” Connectors for Optical Fibres and Cables Part 1 Generic Specification	LITD 11
62	IS 15480 : Part 1 : 2018	Fibre optic interconnecting devices and pass4e components - Fibre optic pass4e power control devices: Part 1 generic specification (First Revision)	LITD 11
63	IS 5894 : 2005	Rubber Hose for Sand Blasting	PCD 13
64	IS 15657 : 2006	Centrifugal pumps for petroleum, petrochemical and natural gas industries	MED 20
65	IS/ISO 13942 : 2000	Bonded abrasive products - Limit deviations and run - Out tolerances	PGD 9
66	IS 746 : 2021	Textiles Handloom cotton blankets grey or coloured Specification	TXD 8
67	IS 13413 : Part 1 : 1992	Designation for cores and assemblies for transformers and inductors for use in telecommunication and electronic equipment: Part 1 laminated cores	LITD 24
68	IS 1856 : 2021	Steel wire ropes for haulage purposes - Specification Fourth Revision	MED 10
69	IS 10086 : 2021	Moulds for Use in Tests of Cement, Concrete and Pozzolana (First Revision)	CED 2
70	IS 10714 : Part 1 : 2006	Technical drawings - General principles of presentation: Part 1 introduction and index	PGD 24
71	IS 12258 : 1987	Technical supply condition for air screw compressors (Oil Flooded) for general purpose and industrial applications	MED 22
72	IS 2531 : 1979	Specification for crank shaft for cotton looms (first revision)	TXD 14
73	IS 835 : 1978	Specification for bottom shaft for cotton looms (first revision)	TXD 14
74	IS 7494 : 1981	Specification for steel for valves for internal combustion engines (First Revision)	MTD 16
75	IS 5824 : 1970	Specification for lancets for use in foundries	MTD 14
76	IS 6013 : 1970	Specification for trowels for use in foundries	MTD 14
77	IS 5850 : 1970	Specification for star (Triangular) cutters for use in foundries	MTD 14
78	IS 16619 : Part 1 : 2018	Live working - Voltage detectors: Part 1 capacitive type to be used for voltages exceeding 1 kV a.c.	ETD 36
79	IS 5841 : 1970	Specification for fluted core cleaners for use in foundries	MTD 14
80	IS 6603 : 2001	Stainless steel bars and flats - Specification (First Revision)	MTD 16
81	IS 3665 : 1966	Dimensions for involute sided splines	PGD 33

Classification Details

Group	:	Gases, Gas Cylinders , Machine tools and other mechanical products
Sub Group	:	Measuring and related equipments
Sub Sub Group	:	Metrological instrument
Aspect	:	Dimensions
Certification	:	None
Relevant Ministries	:
Sustainable development Goals :
Short Commom Man's Title	:	ISO Systems of limits and fits Part 1 Bases of tolerance, deviations and fits
ITC-HS Code	:	741533
Degree of Equivalence	:	Identical under dual numbering
Identical/Equivalent International Standard(s)	:	ISO 286-1 : 2010
Harmonized with	:	ISO

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 919 : Part 1 : 2014

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 1

Gazette Document : 1

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 919 : Part 1 : 2014

List of Expired or Cancelled Licenses under IS : IS 919 : Part 1 : 2014

List of laboratories for : IS 919 : Part 1 : 2014

List of Amendement(s) for : IS 919 : Part 1 : 2014

List of Gazette Document(s) for : IS 919 : Part 1 : 2014

List of Corigenda Document(s) for : IS 919 : Part 1 : 2014

List of Product Manuals & SIT