Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 2004 : 1991
Reviewed In : 2023

IS Title/आईएस शीर्षक : Carbon steel forgings for general engineering purposes - Specification (Third Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 3

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : March, 2023

Technical Department/तकनीकी विभाग : MTD (Metallurgical Engineering Department)

Technical Committee/तकनीकी समिति : MTD 16 (Alloy Steels and Forging Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. RAM SAI KUMAR GEDELA (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 1

Click to download

Laboratory : 1

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 2004 : 1991
Reviewed In : 2023 :

1	IS 228 : 1959 Reviewed In : 1997	Methods of chemical analysis of pig iron, cast iron and plain carbon and low alloy steel	MTD 7
2	IS 1387 : 1993 Reviewed In : 2024	General requirements for the supply of metallurgical materials (Second Revision)	MTD 4
3	IS 1599 : 2023 ISO 7438 : 2020	Metallic materials - Bend test (Fourth Revision)	MTD 3
4	IS 1608 : 2005 IS 1608:2005 / ISO 6892:1998 Reviewed In : 2017	Mechanical testing of metals - Tensile Testing	MTD 3
5	IS 1762 (Part 1) : 1974 Reviewed In : 2024	Code for designation of steels: Part 1 based on letter symbols (First Revision)	MTD 4
6	IS 1875 : 1992 Reviewed In : 2021	Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)	MTD 4
7	IS 1956 (Part 6) : 1976 Reviewed In : 2023	Glossary of terms relating to iron and steel: Part 6 forging (Including Drop Forging) (First Revision)	MTD 16
8	IS 3469 (Part 13) : 1974 Reviewed In : 2023	Tolerances for closed die steel forgings (First Revision)	MTD 16

International Standards Referred In IS 2004 : 1991
Reviewed In : 2023

Standard contains no Cross Referenced International Standard.

IS 2004 : 1991
Reviewed In : 2023 is Referred in following Indian Standards :

1	IS 927 : 1981	Specification for fire hooks (Second Revision)	CED 22
2	IS 15811 : 2008	Long - Range water - Cum - Foam monitor with self - Inducting, aspirating and non - Aspirating jetand spray/fog nozzle for fire fighting - Specification	CED 22
3	IS 5486 : 1985	Specification for quick release knife (First Revision)	CED 22
4	IS 10490 : 1983	Specification for breech loading shot guns, single and double barrel	PGD 28
5	IS 10491 : 1983	Specification for muzzle loading shot guns, single and double barrel	PGD 28
6	IS 14422 : 1997	Arms and ammunition - Rifle 5.5 mm (0.22), bolt operated - Specification	PGD 28
7	IS 4622 : 2020	Recommendations for Structural Design of Fixed-Wheel Gates ( Fourth Revision )	WRD 12
8	IS 6938 : 2005	Design of rope drum and chain hoists for hydraulic gates - Code of practice (Second Revision)	WRD 12
9	IS 7332 : Part 1 : 1991	Spherical valves for hydropower stations and systems: Part 1 criteria for structural and hydraulic design (Fl"rsl Revision)	WRD 12
10	IS 10096 :Part 1 : Sec 2 : 2014	Recommendations for inspection, testing and maintenance of radial gates and rope drum hoists: Part 1 inspection, testing and assembly at the manufacturing stage: Sec 2 rope drum hoists (First Revision)	WRD 12
11	IS 10210 : 1993	CrlTeria for design of hydraulic hoists for gates (First Revision)	WRD 12
12	IS 4623 : 2000	Recommendations for structural design of radial gates (Third Revision)	WRD 12
13	IS 7326 : Part 1 : 1992	Penstock and turbine inlet butterfly valves for hydropower stations and systems: Part 1 criteria for structural and hydraulic design (First Revision)	WRD 12
14	IS 3938 : 1983	Specification for electric wire rope hoists (Second Revision)	MED 14
15	IS 6547 : 2015	Electric chain hoists - Specification (First Revision)	MED 14
16	IS 13308 : 1992	Lifting appliances - Sheaves - Technical supply condition	MED 14
17	IS 13065 : 1991	Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements	MED 7
18	IS 11745 : 1986	Technical supply conditions for positive displacement pumps - Reciprocating	MED 20
19	IS 10962 : 1984	Technical Supply Conditions For Reciprocating Air Compressor Above 60 Kw	MED 22
20	IS 15947 : PART 2 : 2012	Concrete delivery pipelines: Part 2 general requirements for pipeline accessories	MED 18
21	IS 13404 : 2012	Power trowel - General requirements (First Revision)	MED 18
22	IS 5500 : Part 2 : 2004	Vibratory roller - General requirements: Part 2 self - Propelled single drum (Third Revision)	MED 7
23	IS 5500 : Part 1 : 2004	Vibratory roller - General requirements: Part 1 self - Propelled tandem drum (Second Revision)	MED 7
24	IS 2361 : 2002	Bulldog grips - Specification (Third Revision)	MED 10
25	IS 13187 : 1991	Road tankers for light petroleum products - Specification	MED 17
26	IS 10605 : 1989	Steel globe valves (Flanged And Butt Welded Ends) for petroleum, petrochemical and allied industries - Specification (First Revision)	MED 17
27	IS 4503 : 1967	Specification for shell and tube type heat exchangers	MED 1
28	IS 2825 : 1969	Code for unfired pressure vessels	MED 1
29	IS 5604 : 1984	Specification for hand - Operated universal gearless pulling and lifting machines (First Revision)	MED 14
30	IS 2486 : Part 1 : 1993	Metal fittings of insulators for overhead power lines with nominal voltage greater than 1 000 V - Specification: Part 1 general requirements and tests (Second Revision)	ETD 6
31	IS 6802 : 1986	Specification for prosthetic hip joint (First Revision)	MHD 9
32	IS 6812 : 2003	Knee joint, uniaxial for below knee prostheses - Specification (Second Revision)	MHD 9
33	IS 4475 : Part 3 : 1989	Foundry - Crane suspended ladlesspecification: Part 3 straight/taper sided ladles 0.25 to 3.0 tonnes for S. G. iron foundries (Second Revision)	MTD 14
34	IS 3510 : 1990	Engineering Metrology - Toolmaker Flats - Specification ( First Revision )	PGD 25
35	IS 5386 : 1969	General purpose Ship's Davit	TED 19
36	IS 5130 : 1969	Specification for drums fitted to cargo and mooring winches	TED 19
37	IS 6024 : 1983	Specification for Guards for Harvesting Machines (First Revision)	FAD 11
38	IS 10233 : 1982	Specification for Tractor - Operated Disc Ploughs	FAD 11
39	IS 12651 : 1989	Forestry Tools - Setting Anvil for Raker Toothed Two Men Cross Cut Saws - Specification	FAD 11
40	IS 14540 : 1998	Intercultivation Equipment - Hand Hoes - Specification	FAD 11
41	IS 5858 : Part 3 : 1970	Specification for accessories to mechanical ventilation systems on board ships: Part 3 control dampers	TED 17
42	IS 6277 : 1971	Specification for cast mud box	TED 17
43	IS B9813 : 2002	Tractor - Operated Blade Terracer - Specification (First Revision)	FAD 11
44	IS 6392 : 2020	Steel Pipes Flanges — Specification ( First Revision )	MTD 19
45	IS 13095 : 2020	Butterfly Valves for General Purposes ( First Revision )	MED 17
46	IS 5501 : 1969	Specification for pneumatic tyred roller	MED 18
47	IS 15475 : Part 3 : 2004	Code of recommended practice for amusement rides safety: Part 3 design, manufacture and erection	MED 6
48	IS 11228 : 1985	Recommendations for design of screw hoists for hydraulic gates	WRD 12
49	IS 5502 : 1988	General requirements for smooth - Wheeled diesel road roller (Second Revision)	MED 7
50	IS 10459 : 1983	Specification for general purpose plug valves	MED 17
51	IS 4509 : 1992	Ring slugging wrenches (Spanners) - specification (First Revision)	PGD 34
52	IS 4508 : 1992	Open ended slugging wrenches (Spanners) - specification (First Revision)	PGD 34

Classification Details

Group	:	Metals, Alloys and Metal Products (including Steel Products)
Sub Group	:	Alloy steels and forgings
Sub Sub Group	:	Forgings
Aspect	:	Product Specification
Certification	:	Voluntary Certification
Relevant Ministries	:	Ministry of Commerce and Industry - Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Steel
Sustainable development Goals :
Short Commom Man's Title	:	Carbon steel forgings for general engineering purposes
ITC-HS Code	:
Degree of Equivalence	:	Indigenous
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 2004 : 1991

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 1

Laboratory : 1

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 2004 : 1991

List of Expired or Cancelled Licenses under IS : IS 2004 : 1991

List of laboratories for : IS 2004 : 1991

List of Amendement(s) for : IS 2004 : 1991

List of Gazette Document(s) for : IS 2004 : 1991

List of Corigenda Document(s) for : IS 2004 : 1991

List of Product Manuals & SIT