Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 228 : 1959
Reviewed In : 1997

IS Title/आईएस शीर्षक : Methods of chemical analysis of pig iron, cast iron and plain carbon and low alloy steel (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : N/A

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : 1997

Technical Department/तकनीकी विभाग : MTD (Metallurgical Engineering Department)

Technical Committee/तकनीकी समिति : MTD 07 (Ores and Feed Stock for Aluminium Industry, its Metals/ Alloys and Products Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : ASHISH WAKLE (SCIENTIST-C)

Other Details

Gazette Document : 0

Classification details for: IS 228 : 1959

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 228 : 1959
Reviewed In : 1997 :

Details could not be found.

International Standards Referred In IS 228 : 1959
Reviewed In : 1997

Standard contains no Cross Referenced International Standard.

IS 228 : 1959
Reviewed In : 1997 is Referred in following Indian Standards :

1	IS 1875 : 1992	Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)	MTD 4
2	IS 2004 : 1991	Carbon steel forgings for general engineering purposes - Specification (Third Revision)	MTD 16
3	IS 3930 : 1994	Flame and induction hardening steels - Specification (Second Revision)	MTD 16
4	IS 4397 : 1999	Cold - Rolled carbon steel strips for ball and roller bearing cages retainers - Specification (Second Revision)	MTD 4
5	IS 4882 : 1979	Specification for low carbon steel wire for rivets for use in bearing industry (First Revision)	MTD 4
6	IS 5489 : 1975	Specification for carburizing steels for use in bearing industry (First Revision)	MTD 16
7	IS 5517 : 1993	Steels for hardening and tempering - Speicification (Second Revision)	MTD 16
8	IS 5518 : 1996	Steels for die blocks for drop forging - Specification (Second Revision)	MTD 16
9	IS 4432 : 1988	Specification for case hardening steels (First Revision)	MTD 16
10	IS 5522 : 2014	Stainless steel sheets and strips for utensils - Specification (Third Revision)	MTD 16
11	IS 2750 : 1964	Specification for steel scaffoldings	CED 7
12	IS 3964 : 1980	Specifiacation for Light Rails (First Revision)	CED 7
13	IS 432 : Part 2 : 1982	Specification for Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire (Third Revision)	CED 54
14	IS 432 : Part 1 : 1982	Specification for Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars (Third revision)	CED 54
15	IS 3443 : 1980	SPecification for Crane Rail Sections (First Revision)	CED 7
16	IS 3529 : 1966	Specification for eyelet pliers	PGD 34
17	IS 3569 : 1966	Specification for burner pliers	PGD 34
18	IS 10748 : 2004	Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)	MTD 4
19	IS 13752 : 1993	Guidelines for reporting sequence of elements in steel and pig iron and mechanical properties in steels	MTD 4
20	IS 14491 : 1997	Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification	MTD 4
21	IS 15103 : 2002	Fire resistant steel - Specification	MTD 4
22	IS 15647 : 2006	Hot rolled steel narrow width strip for welded tubes and pipes	MTD 4
23	IS 15914 : 2011	High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification	MTD 4
24	IS 15911 : 2010	Structural steel (Ordinary Quality) - Specification	MTD 4
25	IS 15962 : 2012	Structural steels for buildings and structures with improved seismic resistance	MTD 4
26	IS 1990 : 2009	Steel rivet and stay bars for boilers (Second Revision)	MTD 4
27	IS 2062 : 2011	Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)	MTD 4
28	IS 280 : 2006	Mild steel wire for general engineering purposes (Fourth Revision)	MTD 4
29	IS 2830 : 2012	Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)	MTD 4
30	IS 2879 : 1998	Mild steel for metal arc welding electrodes - Specification (Third Revision)	MTD 4
31	IS 3195 : 1992	Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)	MTD 4
32	IS 3502 : 2009	Steel chequered plates (Third Revision)	MTD 4
33	IS 3885 : Part 1 : 1992	Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)	MTD 4
34	IS 3885 : Part 2 : 1992	Steel for the manufacture of laminated springs (Railway Rollingstock): Part 2 rib and groove sections (Second Revision)	MTD 4
35	IS 3975 : 1999	Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)	MTD 4
36	IS 4454 : Part 1 : 2001	Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)	MTD 4
37	IS 4454 : Part 2 : 2001	Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)	MTD 4
38	IS 4454 : Part 4 : 2001	Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)	MTD 16
39	IS 5872 : 1990	Cold rolled steel strips (Box Strappings) - Specification	MTD 4
40	IS 6240 : 2008	Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)	MTD 4
41	IS 8052 : 2006	Steel ingots,billets and blooms for the production of springs, rivets and screws for general engineering applications - Specification (Second Revision)	MTD 4
42	IS 8564 : 1977	Specification for steel wire for nipples for spokes	MTD 4
43	IS 8565 : 1977	Specification for heald wire	MTD 4
44	IS 8566 : 1977	Specification for steel wire for reeds	MTD 4
45	IS 8917 : 1978	Specification for steel plates for galvanizing pots	MTD 4
46	IS 9485 : 1980	Specification for cold - Reduced and hot - Rolled carbon steel sheet for porcelain enamelling	MTD 4
47	IS 9476 : 1980	Specification for cold-rolled steel strips for carbon steel razor blades	MTD 4
48	IS 8952 : 1995	Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)	MTD 4
49	IS 8951 : 2001	Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)	MTD 4
50	IS 12308 : Part 1 : 1987	Methods for chemical analysis of cast iron and pig iron: Part 1 determination of total carbon by thermal conductivity method (For Carbon 1.00 To 4.50 Percent)	MTD 34
51	IS 12308 : Part 10 : 1991	Methods of chemical analysis of cast iron and pig iron: Part 10 determination of manganese (Up To 7.0 Percent) by arsenite (Volumetric) method	MTD 34
52	IS 12308 : Part 11 : 1991	Methods for chemical analysis of castir on and pigiron: Part 11 determination of total carbon by the direct combustion volumetric method (For Carbon 1.50 To 4.50 Percent)	MTD 34
53	IS 12308 : Part 12 : 1992	Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 12 Determination of copper by atomic absorption spectrometric method (for copper 0.01 to 0.5 percent)	MTD 34
54	IS 12308 : Part 14 : 1993	Methods of chemical analysis of cast iron and pig iron: Part 14 determination of titanium by hydrogen peroxide (Spectrophotometric) method (For Titanium Up To 0.25 Percent)	MTD 34
55	IS 12308 : Part 2 : 1987	Methods for chemical analysis of cast iron and pig iron: Part 2 determination of sulphur by iodimetric titration after combustion (For Sulphur 0.005 To 0.25 Percent)	MTD 34
56	IS 12308 : Part 3 : 1987	Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 3 Determination of manganese by periodic spectrophotometric method (for manganese 0.1 to 2.5 percent)	MTD 34
57	IS 12308 : Part 7 : 1991	Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 7 Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent)	MTD 34
58	IS 228 : Part 4 : 1987	Method for chemical analysis of steels: Part 4 determination of total carbon by gravimetric method (For Carbon R 0.1 Percent) (Third Revision)	MTD 34
59	IS 9321 : 1979	Specification for material for alloy cast iron valve seat inserts	MTD 6
60	IS 3355 : 1974	Specification for grey iron castings for elevated temperatures for non - Pressure containing parts (First Revision)	MTD 6
61	IS 5789 : 1993	Austenitic spheroidal graphite iron castings for pressure containing parts suitable for low - Temperature service - Specification (First Revision)	MTD 6
62	IS 1785 : Part 1 : 1983	Specification for Plain Hard - Drawn Steel Wire for Prestressed Concrete: Part 1 Cold Drawn Stress - Relieved Wire (Second Revision)	CED 54
63	IS 1785 : Part 2 : 1983	Specification for Plain Hard Drawn Steel Wire for Prestressed Concrete: Part 2 As-Drawn Wire (First Revision)	CED 54
64	IS 2090 : 1983	Specification for High Tensile Steel Bars Used in Prestressed Concrete (First Revision)	CED 54
65	IS 1278 : 1972	Specification for filler rods and wires for gas welding (Second Revision)	MTD 11
66	IS 15977 : 2013	Classification and acceptance tests for bare solid wire electrodes and wire flux combination for submerged arc welding of structrual steel - Specification	MTD 11
67	IS 6419 : 1996	Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)	MTD 11
68	IS 1161 : 2014	Steel tubes for structural purposes - Specification (Fifth Revision)	MTD 19
69	IS B3601 : 2006	Steel Tubes for Mechanical and General Engineering Purposes (Bi-lingual)	MTD 19
70	IS 12791 : 1989	High carbon chromium bearing steel tubes for the manufacture of bearing races - Specification	MTD 19
71	IS 1239 : Part 1 : 2004	Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)	MTD 19
72	IS 1239 : Part 2 : 2011	Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)	MTD 19
73	IS 3074 : 2013	Steel tubes for automotive purposes - Specification (Third Revision)	MTD 19
74	IS 3589 : 2001	Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)	MTD 19
75	IS 3601 : 2006	Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)	MTD 19
76	IS 4270 : 2001	Steel tubes used for water wells specification (Third Revision)	MTD 19
77	IS 4923 : 2017	Hollow steel sections for structural use - Specification (Third Revision)	MTD 19
78	IS 7806 : 1993	Martensitic steel and austenitic high alloy steel castings for high temperature corrosion services - Specification (Second Revision)	MTD 14
79	IS 7899 : 2006	Alloy steel castings suitable for pressure service - Specification (Third Revision)	MTD 14
80	IS 1030 : 1998	Carbon steel castings for general engineering purposes - Specification (Fifth Revision)	MTD 14
81	IS 10343 : 1999	Carbon and low alloy steel investment castings for general applications - Specification (Second Revision)	MTD 14
82	IS 11709 : 2007	Technical delivery conditions for investment castings of steel (Second Revision)	MTD 14
83	IS 11758 : 1994	Precipitation hardening stainless steel castings - Specification (First Revision)	MTD 14
84	IS 6079 : 1989	Low alloy cast steel grinding media - Specification (Second Revision)	MTD 14
85	IS 12968 : 1991	Steel castings for crankshafts for marine engines - Specification	MTD 14
86	IS 13505 : 1992	Centrifugally cast high alloy steel and nickel base tubing for pressure application at high temperature - Specification	MTD 14
87	IS 4491 : 1994	Steel castings of high magnetic permeability - Specification (Third Revision)	MTD 14
88	IS 4896 : 1992	One percent chromium steel castings for resistance to abrasion - Specification (Second Revision)	MTD 14
89	IS 4899 : 2006	Ferritic and martensitic steel castings for use at low temperature - Specification (Third Revision)	MTD 14
90	IS 276 : 2000	Austenitic - Manganese steel castings - Specification (First Revision)	MTD 14
91	IS 2856 : 1999	Carbon steel castings for pressure containing parts suitable for fusion welding - Specification (Fourth Revision)	MTD 14
92	IS 3444 : 1999	Corrosion resistant high alloy steel and nickel base castings for general applications - Specification (Third Revision)	MTD 14
93	IS 3038 : 2006	Martensitic stainless steel and alloy steel castings for pressure containing parts suitable for high temperature service - Specification (Fourth Revision)	MTD 14
94	IS 2986 : 1990	Steel castings for marine engines and boilers - Specifcication (Second Revision)	MTD 14
95	IS 2985 : 1990	Steel Castings for Ship's Structure	MTD 14
96	IS 2644 : 1994	High strength steel castings for general engineering and structural purposes - Specification (Fourth Revision)	MTD 14
97	IS 2707 : 1996	Carbon steel castings for surface hardening - Specification (Fourth Revision)	MTD 14
98	IS 2708 : 1993	1.5 percent manganese steel castings for general engineering purposes - Specification (Third Revision)	MTD 14
99	IS 12549 : 1988	Specification for iron nickel cobalt sealing alloy	MTD 16
100	IS 12836 : 1989	36 - Nickel iron soft magnetic rods - Specification	MTD 16
101	IS 12881 : 1990	36 - Nickel iron soft magnetic strips - Specification	MTD 16
102	IS 12882 : 1990	48 - Nickel iron soft magnetic strip - Specification	MTD 16
103	IS 13352 : 1992	Stock for forgings produced from continuously cast blooms, billets and slabs - Specification	MTD 16
104	IS 14698 : 1999	Carbon and low alloy steel billets, blooms, slabs and bars for manufacture of shell bodies and proof shots used in defence services - Specification	MTD 16
105	IS 6527 : 1995	Stainless steel wire rods - Specification (First Revision)	MTD 16
106	IS 6528 : 1995	Stainless steel wire - Specification (First Revision)	MTD 16
107	IS 6529 : 1996	Stainless steel blooms, billets and slabs for forging - Specification (First Revision)	MTD 16
108	IS 6911 : 2017	Stainless steel plate, sheet and strip - Specification (Second Revision)	MTD 16
109	IS 15997 : 2012	Low nickel austenitic stainless steel plate, sheet, and strip for utensils and kitchen appliances - Specification	MTD 16
110	IS 16651 : 2017	High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification	CED 54
111	IS 10774 : 1993	Corrosion resistant high alloy steel and nickel base investment castings for general application - Specification (First Revision)	MTD 14
112	IS 6647 : 1972	Specification for drill pipes for use in oil or natural gas wells	MTD 19
113	IS 5433 : 1969	Specification for oil well steel casing pipes and couplings	MTD 19
114	IS 2611 : 1964	Specification for carbon chromium molybdenum steel forgings for high temperature service	MTD 16
115	IS 6286 : 1971	Specification for seamless and welded steel pipes for sub - Zero temperature service	MTD 19
116	IS/ISO 18825 : Part 1 : 2016	Textiles Clothing Digital fittings Part 1: Vocabulary and terminology used forthe virtual human body	TXD 20
117	IS 17676 : Part 1 : 2021	Guidelines for the management of assets of water supply and wastewater systems Part 1:Drinking water distribution networks	EED 4
118	IS 17677 : 2021	Guidelines for Health Risk Assessment and Management for Non-Potable Water Reuse	EED 2
119	IS 4824 : 2006	Bead wire for tyres - Specification (Second Revision)	MTD 4

Classification Details

Group	:	N/A
Sub Group	:	N/A
Sub Sub Group	:	N/A
Aspect	:
ITC-HS Code	:	N/A
Degree of Equivalence	:
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 228 : 1959

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 0

Classification details for: IS 228 : 1959

Cross Reference Details

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 228 : 1959

List of Expired or Cancelled Licenses under IS : IS 228 : 1959

List of laboratories for : IS 228 : 1959

List of Amendement(s) for : IS 228 : 1959

List of Gazette Document(s) for : IS 228 : 1959

List of Corigenda Document(s) for : IS 228 : 1959

List of Product Manuals & SIT