Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 15500 (Part 1 to 8) : 2004
Reviewed In : 2020

IS Title/आईएस शीर्षक : Deepwell handpumps, components and special tools - Specification (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : 1

Aspect/पक्ष : Others

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : April, 2020

Technical Department/तकनीकी विभाग : MED (Mechanical Engineering Department)

Technical Committee/तकनीकी समिति : MED 27 (Handpumps Sectional Committee)

Member Secretary/सदस्य सचिव : Ms. NEHA THAKUR (SCIENTIST-C)

Other Details

Gazette Document : 4

Click to download

Classification details for: IS 15500 : Part 1 to 8 : 2004

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 15500 (Part 1 to 8) : 2004
Reviewed In : 2020 :

1	IS 14962 (Part 3) : 2022 ISO 965-3: 2021	ISO general purpose metric screw threads - Tolerances: Part 3 deviations for constructional screw threads	PGD 37
2	IS 2932 : 2013 Reviewed In : 2023	Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification : Part 1 For domestic and decorative applcations (Fourth Revision)	CHD 20
3	IS 1161 : 2014 Reviewed In : 2024	Steel tubes for structural purposes - Specification (Fifth Revision)	MTD 19
4	IS 1239 (Part 1) : 2004 Reviewed In : 2024	Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)	MTD 19
5	IS 1239 (Part 2) : 2011 Reviewed In : 2021	Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)	MTD 19
6	IS 1363 (Part 1) : 2023 ISO 4016 : 2022	Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision )	PGD 37
7	IS 1363 (Part 3) : 2002 ISO 4034 Reviewed In : 2013	Hexagon Head Bolts, Screws and Nuts of Product Grade â€˜Câ€™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )	PGD 37
8	IS 1364 (Part 1) : 2023 ISO 4014 : 2022	Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision)	PGD 37
9	IS 1367 (Part 11) : 2020 ISO 4042 : 2018	Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision )	PGD 37
10	IS 1367 (Part 14/Sec 1) : 2023 ISO 3506-1 : 2020	Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision)	PGD 37
11	IS 1367 (Part 14/Sec 2) : 2023 ISO 3506-2 : 2020	Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision)	PGD 37
12	IS 1573 : 1986 Reviewed In : 2021	Specification for electroplated coatings of zinc on iron and steel (Second Revision)	MTD 24
13	IS 2030 : 1989 ISO 2236 Reviewed In : 2024	Box spanners - Specification (Second Revision)	PGD 34
14	IS 2062 : 2011 Reviewed In : 2021	Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)	MTD 4
15	IS 2074 : 1992	Ready Mixed Paint, Air Drying, Red Oxide Zinc Chrome, Priming	CHD 20
16	IS 210 : 2009 Reviewed In : 2020	Grey iron castings - Specification (Fifth Revision)	MTD 6
17	IS 2102 (Part 1) : 1993 ISO 2768-1-89 Reviewed In : 2024	General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision)	PGD 37
18	IS 2269 : 2006 ISO 4762 Reviewed In : 2021	Hexagon socket head cap screws (Fifth Revision)	PGD 37
19	IS 2403 : 2024 ISO 606	Short - Pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Third Revision)	PGD 33
20	IS 2500 (Part 1) : 2000 ISO 2859-1:1999 Reviewed In : 2021	Sampling procedures for inspection by attributes: Part 1 sampling schemes indexed by acceptance quality limit (AQL) for lot - By - Lot inspection (Third Revision)	MSD 3
21	IS 2629 : 1985 Reviewed In : 2021	Recommended practice for hot-dip galvanizing of iron and steel (First Revision)	MTD 24
22	IS 2643 : 2005 Reviewed In : 2021	Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision)	PGD 37
23	IS 2811 : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision	Recommendations for manual tungsten inert - Gas arc welding of austenitic stainless steel (First Revision)	MTD 11
24	IS 318 : 1981 Reviewed In : 2021	Specification for leaded tin bronze ingots and castings (Second Revision)	MTD 8
25	IS 3400 : 2021 ISO 37 : 2017	Methods of test for vulcanized rubber: Part 1 determination of tensile stress - Strain properties (Third Revision)	PCD 29
26	IS 3400 (Part 2) : 2023 ISO 48-2:2018	Methods of test for vulcanized rubber: Part 2 rubber, vulcanized or thermoplastic - Determination of hardness (Hardness Between 10 Irhd And 100 Irhd) (Fourth Revision)	PCD 29
27	IS 3400 (Part 22) : 1984 Reviewed In : 2019 Reaffirmed but not taken up for revision	Methods of test for vulcanized rubber: Part 22 chemical analysis	PCD 29
28	IS 3400 (Part 6) : 2018 ISO 1817 : 2015 Reviewed In : 2024	Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids (Fourth Revision)	PCD 29
29	IS 3428 : 2009 Reviewed In : 2019	Dimensions for relief grooves (Second Revision)	PGD 37
30	IS 407 : 1981 Reviewed In : 2021	Specification for brass tubes for general purposes (Third Revision)	MTD 8
31	IS 4454 (Part 1) : 2001 Reviewed In : 2021	Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)	MTD 4
32	IS 4695 (Part 1) : 2003 Reviewed In : 2021	General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision)	PGD 37
33	IS 4695 (Part 2) : 2003 Reviewed In : 2021	General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision)	PGD 37
34	IS 4740 : 1979 Reviewed In : 2023	Code of Practice for Packaging of Steel Tubes	TED 24
35	IS 4759 : 1996 Reviewed In : 2021	Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)	MTD 24
36	:
37	IS 5206 : 1983 Reviewed In : 2024	Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)	MTD 11
38	IS 549 : 2005 Reviewed In : 2021	Split pins - Specification (Third Revision)	PGD 37
39	IS 5517 : 1993 Reviewed In : 2024	Steels for hardening and tempering - Speicification (Second Revision)	MTD 16
40	IS 554 : 1999 ISO 7-1 Reviewed In : 2024	Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision)	PGD 37
41	IS 6455 : 2020	Single Row Deep Groove Ball Bearings — Specification ( First Revision )	PGD 13
42	IS 6603 : 2024	Stainless steel bars and flats - Specification (First Revision)	MTD 16
43	IS 6912 : 2005 Reviewed In : 2021	Copper and copper alloys forging stock and forging - Specification (Second Revision)	MTD 8
44	IS 7002 : 2018 ISO 7040 : 2012 Reviewed In : 2023	Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision)	PGD 37
45	IS 808 : 2021	Dimensions for hot rolled steel beam, column, channel and angle sections (Third Revision)	CED 7
46	IS 9550 : 2024	Bright steel bars - Specification (First Revision)	MTD 4
47	IS 9595 : 1996 Reviewed In : 2019 Reaffirmed but not taken up for revision	Metal - Arc welding of carbon and carbon manganese steels - Recommendations (Fifth Revision)	MTD 11
48	IS 9839 : 1981 Reviewed In : 2021	Specification for chromate conversion coatings on electroplated zinc and cadmium coatings	MTD 24
49	IS 1367 (Part 2) : 2002 ISO 4759-1 Reviewed In : 2023	Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision)	PGD 37
50	IS 3400 (Part 10) : 1977 Reviewed In : 2019	Methods of test for vulcanized rubbers: Part x compression set at constant strain (First Revision)	PCD 29

International Standards Referred In IS 15500 (Part 1 to 8) : 2004
Reviewed In : 2020

Standard contains no Cross Referenced International Standard.

IS 15500 (Part 1 to 8) : 2004
Reviewed In : 2020 is Referred in following Indian Standards :

1	IS 12732 : 1989	Deepwell handpump - Nomenclature identification and packaging of components	MED 27
2	IS/IEC 60721 : Part 3 : Sec 3 : 2019	Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 3 Stationary use at weatherprotected locations	LITD 1

Classification Details

Group	:	Pumps, Engines and Compressors
Sub Group	:	Pumps, Compressors and Components
Sub Sub Group	:	Handpumps
Aspect	:	Others
Certification	:	Not Certifiable
Relevant Ministries	:	Ministry of Drinking Water and Sanitation
Sustainable development Goals :
Short Commom Man's Title	:	Deepwell Handpump
ITC-HS Code	:
Degree of Equivalence	:	Indigenous
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 15500 : Part 1 to 8 : 2004

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 4

Classification details for: IS 15500 : Part 1 to 8 : 2004

Cross Reference Details

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 15500 : Part 1 to 8 : 2004

List of Expired or Cancelled Licenses under IS : IS 15500 : Part 1 to 8 : 2004

List of laboratories for : IS 15500 : Part 1 to 8 : 2004

List of Amendement(s) for : IS 15500 : Part 1 to 8 : 2004

List of Gazette Document(s) for : IS 15500 : Part 1 to 8 : 2004

List of Corigenda Document(s) for : IS 15500 : Part 1 to 8 : 2004

List of Product Manuals & SIT