a) Standardization relating to automotive engines and transmission, components, stationary internal combustion engines for agriculture.
b) Co-ordination of work with ISO/ TC 22, ISO/ TC 22/ SC 34, ISO/ TC 70, ISO/ TC 70/ SC 7 and ISO/ TC 70/ SC 8
ISO TC-22 SC-34 (P): Propulsion, powertrain and powertrain fluids ; ISO TC-70 (P): Internal combustion engines ; ISO TC-70 SC-7 (P): Tests for lubricating oil filters ; ISO TC-70 SC-8 (P): Exhaust gas emission measurement ;
2
TED 4
Automotive Braking Systems, Vehicle Testing, Steering and performance Evaluation
a)Standardization of automotive braking systems, steering systems and their components, testing of vehicles as a whole for performance evaluation and road worthiness
b)Co-ordination of work with ISO/TC 22 and its Sub-committees
ISO TC-22 (P): Road Vehicles ; ISO TC-22 SC-33 (O): Vehicle dynamics, chassis components and driving automation systems testing ; ISO TC-22 SC-35 (P): Lighting and visibility ; ISO TC-22 SC-38 (P): Motorcycles and mopeds ; ISO TC-22 SC-39 (O): Ergonomics ;
3
TED 6
Automotive Body, Chassis and Accessories Sectional Committee
a)Standardization of chassis assembly, aerodynamics and ergonomic aspects of vehicles and the body, body fittings, seats, vehicle accessories and garage equipments etc. including Standardization relating to Automotive springs including engine rocker arm springs and suspension systems.
b)Co-ordination of work with relevant subcommittees of ISO/TC 22 and ISO/ TC 227
ISO TC-22 SC-35 (P): Lighting and visibility ; ISO TC-22 SC-38 (P): Motorcycles and impact testing ; ISO TC-22 (P): Road vehicles ; ISO TC-22 SC-40 (O): Specific aspects for light and heavy commercial vehicles, busses and trailers ;
Standardization of automotive tyres, tubes, rims and related
b)Co-ordination of work with ISO/TC 31 and its subcommittees
ISO TC-31 (P): Tyres, rims and valves ; ISO TC-31 SC-3 (P): Passenger car tyres and rims ; ISO TC-31 SC-4 (P): Truck and bus tyres and rims ; ISO TC-31 SC-5 (P): Agricultural tyres and rims ; ISO TC-31 SC-6 (O): Off-the-road tyres and rims ; ISO TC-31 SC-7 (P): Industrial tyres and rims ; ISO TC-31 SC-9 (P): Valves for tube and tubeless tyres ; ISO TC- (O): Vehicle dynamics, chassis components and driving automation systems testing ; ISO TC-31 SC-10 (P): Cycle, moped, motorcycle tyres and rims ; ISO TC-22 (P): Road vehicles ;
Standardization relating to electrical and optical equipments, instruments and their related components including electronics for automotive vehicles
b) Co-ordination of work with ISO/TC 22, ISO/ TC 22/ SC 31, ISO/ TC 22/ SC 32 and ISO/ TC 22/ SC 35
ISO TC-22 (P): Road vehicles ; ISO TC-22 SC-32 (P): Electrical and electronic components and general system aspects ; ISO TC-22 SC-35 (P): Lighting and visibility ; ISO TC-22 SC-41 (P): Specific aspects for gaseous fuels ;
Standardization of systems, accessories, fittings, test method, performance requirements of aircraft and space vehicles, aircraft electrical and allied equipment, air cargo handling and specialized ground handling equipment
b)Co-ordination of work with ISO/TC 20 & its sub-committees, ISO/TC 31/SC 8 and ISO/TC 192
ISO TC-192 (P): Gas turbines ; ISO TC-20 (P): Aircraft and space vehicles ; ISO TC-20 SC-1 (P): Aerospace electrical requirements ; ISO TC-20 SC-10 (P): Aerospace fluid systems and components ; ISO TC-20 SC-13 (P): Space data and information transfer systems ; ISO TC-20 SC-14 (P): Space systems and operations ; ISO TC-20 SC-4 (P): Aerospace fastener systems ; ISO TC-20 SC-6 (P): Standard atmosphere ; ISO TC-20 SC-8 (P): Aerospace terminology ; ISO TC-20 SC-9 (P): Air cargo and ground equipment ; ISO TC-31 (P): Tyre, Rims and Valves ;
a) Formulation of standards for bicycles, bicycle parts and accessories, glossary of terms, etc.
b) Co-ordination of work with ISO/ TC 149, ISO/ TC 149/ SC 1 and sub-committee ISO/ TC 31/ SC 10
ISO TC-149 (P): Cycles ; ISO TC-149 SC-1 (P): Cycles and major sub-assemblies ; ISO TC-31 SC-10 (P): Cycle, moped, motorcycle tyres and rims ; ISO TC-31 (P): Tyre, Rims and Valves ;
Standardization work relating to ships and their systems-accessories and fittings (other than main propulsive machinery) performance, testing, terminology, codes of practice, marine environment, ship management and quality assurance, off-shore
b)Co-ordination of work with ISO/TC 8 and its
relevant sub-committees.
ISO TC-8 (P): Ships and marine technology ; ISO TC-8 SC-11 (P): Intermodal and Short Sea Shipping ; ISO TC-8 SC-12 (P): Ships and marine technology - Large yachts ; ISO TC-8 SC-2 (O): Marine environment protection ; ISO TC-8 SC-3 (O): Piping and machinery ; ISO TC-8 SC-4 (O): Outfitting and deck machinery ;
a)Standardization of hull and deck fittings for inland vessels dredgers, tugs, hopper barges, launches, water barges and constructional practices, performance requirements, trials, machinery and equipments for fishings vessels and trawlers.
b)Co-ordination of work with ISO/TC 188 & ISO/TC 8 and its relevant sub-committees.
ISO TC-188 (O): Small craft ; ISO TC-8 SC-1 (P): Maritime safety ; ISO TC-8 SC-6 (O): Navigation and ship operations ; ISO TC-8 SC-7 (P): Inland navigation vessels ; ISO TC-8 SC-8 (P): Ship design ;
Standardization of all fittings for main propelling machinery, auxiliary machinery, testing procedures auxiliaries required for the operation of main propulsive machinery, marine internal combustion engine, heat exchanger and fittings; winches, windlasses and steering gears; machinery for dredgers, tugs and other small crafts. Buoyant apparatus; lifebuoy; distress signals and other life saving equipment lifeboats, life rafts and launching gear; equipment, systems and engineering for fire fighting, fire protection and detection etc; magnetic and gyro compasses and connected items; signalling equipment navigation lights and shapes; clinometer, navigational sextant, instruments for chart work etc; auto alarm; auto keying devices; direction finders; electronic equipment for marine navigation
b)Co-ordination of work with ISO/TC 8 and its relevant sub-committees.
IEC TC-80 (P): Maritime navigation and radiocommunication equipment and systems
;
11
TED 22
Transport Tractors, Trailers And Industrial Trucks
Standardization work of transport, industrial tractors trailers (including trailers for carrying rail and sea freight containers) and powered
industrial trucks, their attachments, related components and testing, safety code for operation and maintenance and other connected
b)Co-ordination of work with ISO/TC 22 and ISO/TC 110
ISO TC-110 (P): Industrial trucks ; ISO TC-110 SC-1 (P): General terminology ; ISO TC-110 SC-2 (P): Safety of powered industrial trucks ; ISO TC-22 SC-40 (O): Specific aspects for light and heavy commercial vehicles, busses and trailers ;
12
TED 24
Transport Packages, Packaging Codes and Pallets Sectional Committee
a)Standardization of Transport packages, their testing’s, intensities of tests and dimensional co-ordination with pallets and containers, freight containers, their components, pallets, safety and related handling Equipment. To prepare packaging codes for packaging of light engineering items and components.
b)Co-ordination of work with ISO/TC 122 and its sub-committees, ISO/TC 104 and ISO/TC 51
ISO TC-122 (P): Packaging ; ISO TC-122 SC-3 (P): Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122) ; ISO TC-122 SC-4 (P): Packaging and the environment ; ISO TC-51 (P): Pallets for unit load method of materials handling ;
13
TED 26
Automotive Vehicles Running on Non Conventional Energy Sources
a)Standardization of Fuel System Components for Automotive Vehicles using New and Renewable Energy Sources such as Compressed Natural Gas (CNG), Liquefied Petroleum Gas (LPG), Bio-Gas, Hydrogen/Methane Blends, Bio-diesel/diesel blends, alcohol (Ethanol/Methanol)-petrol blends Hydrogen, Fuel Cell and their installation requirements.
b)Liaison with Co-ordination of work with ISO/TC 22/SC 25.
ISO TC-22 (P): Road vehicles ; ISO TC-22 SC-41 (P): Specific aspects for gaseous fuels ; ISO TC-197 (P): Hydrogen technologies ;
a)Standardization of information, communication and control systems in the field of urban and rural surface transportation, including intermodal and multimodal aspects thereof, traveller information, traffic management, public transport, commercial transport, emergency services and commercial services in the intelligent transport systems
b)Co-ordination of work with ISO/TC 204 excluded in-vehicle transport information and control systems (ISO/TC 22) and ISO/TC 241
ISO TC-204 (P): Intelligent transport systems ; ISO TC-241 (P): Road traffic safety management systems ; ISO TC-22 (P): Road vehicles ; ISO TC-22 SC-31 (P): Data communication ;
a)Standardization in the field of passive safety crash protection systems and impact test procedures.
b)Co-ordination of work with relevant subcommittees of ISO/TC 22
ISO TC-22 SC-36 (P): Safety and impact testing ; ISO TC-22 (P): Road vehicles ;
17
TED 31
In service Vehicle Inspection, Certification and Garage Equipment Sectional Committee
ISO TC-104 (P): Freight containers ; ISO TC-104 SC-1 (P): General purpose containers ; ISO TC-104 SC-2 (P): Specific purpose containers ; ISO TC-104 SC-4 (P): Identification and communication ;
20
TED 34
Springs and Suspension Systems Sectional Committee