Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : IC Engine Components )
Total Standards : 111
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10000 : Part 1 : 1980 |
Methods of tests for internal combustion engines: Part 1 glossary of terms relating to test methods | 0 | Nov, 2020 | Download | |
| 2 | IS 10000 : Part 2 : 1980 |
Methods of tests for internal combustion engines Part 2 standar d reference conditions | 1 | Nov, 2020 | Download | |
| 3 | IS 10000 : Part 3 : 1980 |
Methods of tests for internal combustion engines: Part 3 measurements for testing - Units and limits of accuracy | 1 | Nov, 2020 | Download | |
| 4 | IS 10000 : Part 4 : 1980 |
Methods of tests for internal combustion engines: Part 4 declaration of power, efficiency, fuel consumption and lubricating oil consumption | 1 | Nov, 2020 | Download | |
| 5 | IS 10000 : Part 5 : 1980 |
Methods of tests for internal combustion engines: Part 5 preparation for tests and measurements for wear | 1 | Nov, 2020 | Download | |
| 6 | IS 10000 : Part 6 : 1980 |
Methods of tests for internal combustion engines: Part 6 recording of test results | 1 | Nov, 2020 | Download | |
| 7 | IS 10000 : Part 7 : 1980 |
Methods of tests for internal combustion, engines: Part 7 governing tests for constant speed engines and selection of engines for use with electrical generators | 2 | Nov, 2020 | Download | |
| 8 | IS 10000 : Part 8 : 1980 |
Methods of tests for internal combustion engines Part 8 performance tests | 1 | Nov, 2020 | Download | |
| 9 | IS 10000 : Part 9 : 1980 |
Methods of tests for internal combustion engines: Part 9 endurance tests | 0 | Nov, 2020 | Download | |
| 10 | IS 10000 : Part 10 : 1980 |
Methods of tests for internal combustion engines: Part 10 tests for smoke levels, limits and corrections for smoke levels for variable ,speed compression ignition engines | 0 | Nov, 2020 | Download | |
| 11 | IS 10000 : Part 11 : 1980 |
Methqds of tests for internal combustion engines: Part 11 information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufacturer along with the engine | 0 | Nov, 2020 | Download | |
| 12 | IS 10000 : Part 12 : 1980 |
Methods of tests for internal combustion engines: Part 12 specimen test certificates | 0 | Nov, 2020 | Download | |
| 13 | IS 10000 : Part 13 : 2002 |
Methods of tests for internal combustion engines: Part 13 recommendations on nature of tests required for functional changes in critical components | 1 | Dec, 2018 | Download | |
| 14 | IS H10001 : 1981 |
Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Up To 20 Kw) | 6 | Jul, 2021 | Buy | |
| 15 | IS 10105 : 1982 |
Specification for fittings for cylinder pressure indicators for internal combustion engines | 2 | Sep, 2019 | Download | |
| 16 | IS 10478 : 2018/ISO 6519:2015 (2 Revision) |
Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs (Second Revision) | 0 | ---- | Buy | |
| 17 | IS 10533 : 1983 |
Specification for valve guides for internal combustion engines | 0 | Sep, 2019 | Download | |
| 18 | IS 11170 : 1985 |
Specification for 1 performance requirements for constant speed compression ignition (Diesel) engines for agricultural purposes (Up To 20 KW) | 5 | Jul, 2021 | Buy | |
| 19 | IS 11509 : PART 1 : 2012/ISO 4548-1:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 1 differential pressure/flow characteristics (First Revision) | 0 | Dec, 2017 | Buy | |
| 20 | IS 11509 : PART 2 : 2012/ISO 4548-2:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 2 element by - Pass valve characteristics (First Revision) | 0 | Dec, 2017 | Buy | |
| 21 | IS 11509 : PART 3 : 2012/ISO 4548-3:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 3 resistance to high differential pressure and to elevated temperature (First Revision) | 0 | Dec, 2017 | Buy | |
| 22 | IS 11838 : 1986 |
Recommendations for measurement of quality characteristics of gudgeon pins | 1 | Jul, 2021 | Download | |
| 23 | IS 12025 : 1987 |
Recommendations for measurement of quality characteristics for pistons | 1 | Dec, 2017 | Download | |
| 24 | IS 12159 : 2018 (2 Revision) |
Method of evaluation of accuracy of parameters of steering geometry of automotive vehicles (Second Revision) | 0 | Jan, 2023 | Download | |
| 25 | IS 12352 : 1988 |
Specification for fuel injection pump mounting bolts | 0 | Sep, 2019 | Download | |
| 26 | IS 12404 : 1988 |
Specification for couplings for driving fuel injection pumps | 0 | Sep, 2019 | Download | |
| 27 | IS 12455 : 1988 |
Performance requirements of aircooled spark ignition automotive engines | 0 | Sep, 2019 | Download | |
| 28 | IS 12460 : 1988 |
Automotive vehicles - Transmission systems - Manual control sequence in automatic transmissions - Recommendations | 1 | Sep, 2019 | Download | |
| 29 | IS 12499 : 1988 |
Specification for two stage, 0.5 litre diesel fuel filters | 0 | Sep, 2019 | Download | |
| 30 | IS 12500 : 1988 |
Specification for 0.2 litre diesel fuel filters | 0 | Sep, 2019 | Download | |
| 31 | IS 12535 : Part 1 : 1988 |
Automotive vehicles - Transmission systems - Glossary: Part 1 general definitions | 0 | Sep, 2019 | Download | |
| 32 | IS 12535 : Part 2 : 1991 |
Automotive vehicles - Transmission systems - Glonssary: Part 2 universal joints and driveshafts | 0 | Jul, 2021 | Download | |
| 33 | IS 12535 : Part 3 : 1991 |
Automotive vehicles - Transmission systems - Glossary: Part 3 drive axles definitions | 0 | Jul, 2021 | Download | |
| 34 | IS 12587 : 1989 |
Automotive vehicles - Transmission system - Gear arrangement - Recommendations | 0 | Sep, 2019 | Download | |
| 35 | IS 12902 : 1990/ISO 7646:1986 |
Commercial vehicles and buses - Gearbox flanges - Type A | 0 | Jul, 2021 | Buy | |
| 36 | IS 12903 : 1990/ISO 7647:1986 |
Commercial vehicles and buses - Gearbox flanges - Type S | 0 | Jul, 2021 | Buy | |
| 37 | IS 12904 : 1990/ISO 7648:1987 |
Flywheel housings for reciprocating internal combustion engines - Nominal dimensions and tolerances | 0 | Jul, 2021 | Buy | |
| 38 | IS 12905 : 1990/ISO 7653:1985 |
Commercial Vehicles-couplings Between Power Take-offs (PTO's) and Ancillary Driven Units | 0 | Jul, 2021 | Buy | |
| 39 | IS 12972 : 1990/ISO 7707:1986 |
Commercial road vehicles - Connections for rear - Mounted power take - Offs (PTO) | 0 | Jul, 2021 | Buy | |
| 40 | IS 12973 : 1990/ISO 7804:1985 |
Commercial road vehicles - Side openings for truck power take - Offs (PTO) | 0 | Jul, 2021 | Buy | |
| 41 | IS 12978 : 2006/ISO 8667:1992 (1 Revision) |
Commercial vehicles and buses - Cross - Tooth gearbox flanges, type T (First Revision) | 0 | Nov, 2020 | Buy | |
| 42 | IS 12996 : 1990 |
Internal combustion engines radiator pressure caps - Specification | 0 | Sep, 2019 | Download | |
| 43 | IS 13016 : 1991 |
Internal combustion engines - Radiator drain cocks - Specification | 0 | Nov, 2020 | Download | |
| 44 | IS 13018 : 1990 |
Internal combustion of test for pressure engines - Method charged engines | 0 | Sep, 2019 | Download | |
| 45 | IS 13029 : 1991 |
Internal combustionengines - setting ignition timing in spark ignition engines - Code of practice | 0 | Nov, 2020 | Download | |
| 46 | IS 13050 : 1991 |
Internal combustion engines - Valve seat inserts - Specification | 0 | Nov, 2020 | Download | |
| 47 | IS 13051 : 1991 |
Internal combustion engines radiator fans - Specification | 0 | Nov, 2020 | Download | |
| 48 | IS 13052 : 1991 |
Internal combustion engines - Cylinder liners - Quality characteristics | 0 | Nov, 2020 | Download | |
| 49 | IS 13090 : 2018 |
Automotive vehicles - Commercial vehicles - Clutch housings - Dimensions (First Revision) | 0 | ---- | Buy | |
| 50 | IS 13476 : 2006 (1 Revision) |
Automotive vehicles - Mechanical steering gear - Methods of test (First Revision) | 0 | Sep, 2022 | Download | |
| 51 | IS 13686 : 1993 |
Internal combustion engines radiators - Methods of test | 0 | Jan, 2019 | Download | |
| 52 | IS 13687 : 1993 |
Internal combustion engines - Radiators - Heat dissipation performance - Method of test | 0 | Jan, 2019 | Download | |
| 53 | IS 13824 : 1993 |
Internal combustion engines - Method of verification of emission of crankcase gases for vehicles powered with four stroke spark ignition engines | 0 | Jan, 2019 | Download | |
| 54 | IS 14273 : 1999 |
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles fitted with compression ignition engines - Method of measurement | 0 | Jan, 2019 | Download | |
| 55 | IS 14382 : 2014 (1 Revision) |
Automotive vehicles - Speed limitation devices - Specification (First Revision) | 0 | Sep, 2019 | Download | |
| 56 | IS 14511 : Part 1 : 2007/ISO 8984-1:1993 (1 Revision) |
Diesel engines - Testing of fuel injectors: Part 1 hand - Lever - Operated testing and setting apparatus (First Revision) | 0 | Dec, 2017 | Buy | |
| 57 | IS 14511 : Part 2 : 2007/ISO 8984-2:1993 (1 Revision) |
Diesel engines - Testing of fuel injectors: Part 2 test methods (First Revision) | 0 | Dec, 2017 | Buy | |
| 58 | IS 14553 : 2008 (1 Revision) |
Automotive vehicles - Apparatus for the measurement of opacity (Smoke) of exhaust gas from vehicles equipped with compression ignition engines - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 59 | IS 14554 : 1998 |
Automotive vehicles - Exhaustemissions - Apparatus for the measurement of carbon monoxide concentration from vehicles equipped with spark ignition engines at idling - Specification | 0 | Dec, 2017 | Download | |
| 60 | IS 14599 : 1999 |
Automotive vehicles - Performance requirements (Measurement Of Power, SFC, Opacity) of positive and compression ignition engines - Method of test | 0 | Sep, 2019 | Download | |
| 61 | IS 14600 : 1999 |
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles equipped with internal combustion engines - Method of measurement | 0 | Sep, 2019 | Download | |
| 62 | IS 1543 : 1964 |
Specification for single cylinder fuel injection pumps (Revised) | 1 | Mar, 2023 | Download | |
| 63 | IS 16057 : 2013 |
Lpg operated internal combustion engines - Safety and performance requirements - Specification | 0 | Aug, 2018 | Download | |
| 64 | IS 16367 : 2017 |
Road vehicles - Liquefied petroleum gas (LPG) specific equipment - Gas injector | 0 | ---- | Download | |
| 65 | IS 17019 : 2018 |
Gear / gerotor oil pump for motorcycle / scooter / moped - Specification | 0 | ---- | Download | |
| 66 | IS 17747 : 2021 |
Spices and Condiments — Nutmeg (Without Shell), Whole and Ground — Specification | 0 | ---- | Download | |
| 67 | IS 2765 : 1982 (1 Revision) |
Specification for radiator hose (First Revision) | 1 | Nov, 2020 | Download | |
| 68 | IS 3169 : 1991 (1 Revision) |
Internal combustion engines - Two stage, one litre, diesel fuel filters (First Revision) | 1 | Nov, 2020 | Download | |
| 69 | IS 3170 : Part 1 : 2006/ISO 2697:1999 (2 Revision) |
Internal Combustion Engines - Fuel Injection Nozzles Part 1 Injection Nozzles - Size `S' | 0 | Nov, 2020 | Buy | |
| 70 | IS 3170 : Part 2 : 2006/ISO 4010:1998 (1 Revision) |
Internal combustion engines - Fuel injection nozzles: Part 2 calibrating nozzle, delay pintle type (First Revision) | 0 | Nov, 2020 | Buy | |
| 71 | IS 3171 : Part 1 : 1997/ISO 2699:1994 (1 Revision) |
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 1 : Flange Mounted Fuel Injectors Size `S' Types 2, 3, 4, 5 and 6 | 0 | Jul, 2021 | Buy | |
| 72 | IS 3171 : Part 2 : 2006/ISO 7026:1997 (1 Revision) |
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 2 : Screw-in Injection Nozzle Holders, Types 20, 21, 21.1 and 27 for Pintle Nozzle Size `S', Type B | 0 | Feb, 2021 | Buy | |
| 73 | IS 3171 : Part 3 : 1997/ISO 7030:1987 |
Internal combustion engines - Fuel injection nozzle holders: Part 3 screw mounted injection nozzle holders, types 12,13,14,15,16,17,18 and 19 | 0 | Jul, 2021 | Buy | |
| 74 | IS 3172 : 1997 (2 Revision) |
Internal combustion engines - Fuel injection equipment - Single and double ended pipe unions (Single And Double Ended Banjo) - Specification (Second Revision) | 1 | Jul, 2021 | Download | |
| 75 | IS 3173 : 1965 |
Specification for high pressure connections for fuel injection equipment for diesel engines | 0 | Mar, 2022 | Download | |
| 76 | IS 3174 : 1974 (1 Revision) |
Specification for pipe union bolt (First Revision) | 0 | Mar, 2023 | Download | |
| 77 | IS 3175 : 2013 (2 Revision) |
Internal combustion engine - Sealing washers for pipe unions - Specification (Second Revision) | 0 | May, 2018 | Download | |
| 78 | IS 3351 : 2006/ISO 4020:2001 (2 Revision) |
Road vehicles - Fuel filters for diesel . engines - Test methods (Second Revision) | 0 | Nov, 2020 | Buy | |
| 79 | IS 3649 : 2018 (1 Revision) |
Automotive vehicles - Clutch facing for automotive transmission - Specification (First Revision) | 0 | ---- | Download | |
| 80 | IS 5791 : 2006/ISO 6621-3:2000 (3 Revision) |
Internal combustion engines - Piston rings - Material specifications (Third Revision) | 0 | Nov, 2020 | Buy | |
| 81 | IS/ISO 6621 : Part 1 : 2018/ISO 6621-1:2018 (1 Revision) |
Internal Combustion Engines — Piston Rings Part 1 Vocabulary ( First Revision ) | 0 | ---- | Buy | |
| 82 | IS 6740 : 1985 (1 Revision) |
Specification for gudgeon pins for internal combustion engines (First Revision) | 1 | Nov, 2020 | Download | |
| 83 | IS 6750 : 1985 (1 Revision) |
Specification for cylinder liners for internal combustion engines (First Revision) | 1 | Nov, 2020 | Download | |
| 84 | IS 7449 : Part 1 : 1974 |
Glossary of terms for IC engines: Part 1 fuel injection equipment | 0 | Sep, 2019 | Download | |
| 85 | IS 7451 : Part 2 : 2006/ISO 1204:1990 (1 Revision) |
Reciprocating internal combustion engines: Part 2 designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right - Hand and left - Hand in - Line engines and locations on an engine (First Revision) | 0 | Jul, 2021 | Buy | |
| 86 | IS 7451 : Part 6 : 2007/ISO 2261:1994 (1 Revision) |
Reciprocating internal combustion engines: Part 6 hand - Operated control devices - Standard direction of motion (First Revision) | 0 | Mar, 2017 | Buy | |
| 87 | IS 7611 : 1993 (1 Revision) |
Internal combustion engines radiators - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 88 | IS 7657 : Part 1 : 1975 |
Specification for starter ring gears for internal combustion engines: Part 1 gears for inertia and solenoid pre - Engaged starters | 1 | Mar, 2023 | Download | |
| 89 | IS 7657 : Part 2 : 1975 |
Specification for starter ring gears for internal combustion engines: Part 2 gears for axial and coaxial starters | 0 | Sep, 2019 | Download | |
| 90 | IS 810 : 1991 (2 Revision) |
Internal combustion engines - Engine valves - Specification (Second Revision) | 0 | Nov, 2020 | Download | |
| 91 | IS 8118 : 2008 (3 Revision) |
Automotive vehicles - Opacity (Smoke) of exhuast gas from vehicles equipped with compression ignition engines operating under free acceleration - Method of measurement (Third Revision) | 0 | Jan, 2019 | Download | |
| 92 | IS/ISO 8178 : Part 7 : 2015/ISO 8178-7:2015 (1 Revision) |
Reciprocating internal combustion engine - Exhaust emission measurement: Part 7 engine family determination (First Revision) | 0 | Nov, 2020 | Buy | |
| 93 | IS 8422 : Part 1 : 1977 |
Specification for piston rings for IC engines: Part 1 plain compression rings from 30 up to 200 mm nominal diameter R - Rings | 0 | Sep, 2019 | Download | |
| 94 | IS 8422 : Part 2 : 1977 |
Specification for piston rings for IC engines: Part 2 taper faced compression rings from 30 up to 200 mm nominal diameter M - Rings | 0 | Sep, 2019 | Download | |
| 95 | IS 8422 : Part 3 : 1977 |
Specification for piston rings for IC engines: Part 3 keystone rings from 82 up to 200 mm nominal diameter T - Rings 15 | 0 | Sep, 2019 | Download | |
| 96 | IS 8422 : Part 4 : 1977 |
Specification for piston rings for IC engines: Part 4 napier oil scraper rings from 30 up to 200 mm nominal diameter N - Rings | 0 | Sep, 2019 | Download | |
| 97 | IS 8422 : Part 5 : 1977 |
Specification for piston rings for IC engines: Part 5 stepped oil scraper rings from 30 up to 200 mm nominal diameter Z - Rings | 0 | Sep, 2019 | Download | |
| 98 | IS 8422 : Part 6 : 1977 |
Specification for piston rings for IC engines: Part 6 slotted oil control rings from 50 up to 200 mm nominal diameter S - Rings | 0 | Sep, 2019 | Download | |
| 99 | IS 8422 : Part 7 : 1977 |
Specification for piston rings for IC engines: Part 7 double bevelled slotted oil control rings from 50 up to 200 mm nominal diameter G - Rings | 0 | Sep, 2019 | Download | |
| 100 | IS 8422 : Part 8 : 1977 |
Specification for piston rings for IC engines: Part 8 narrow land slotted oil control rings from 50 up to 200 mm nominal diameter D - Rings | 0 | Sep, 2019 | Download | |
| 101 | IS 8503 : 1986 (1 Revision) |
Technical supply conditions for aluminium alloy pistons for internal combustion engines (First Revision) | 1 | Nov, 2020 | Download | |
| 102 | IS/ISO 8528 : Part 4 : 2005/ISO 8528-4:2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 4 controlgear and switchgear | 0 | Sep, 2019 | Buy | |
| 103 | IS/ISO 8528 : Part 6 : 2005/ISO 8528-6:2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 6 test methods | 0 | Sep, 2019 | Buy | |
| 104 | IS/ISO 8528 : PART 10 : 1998/ISO 8528-10 : 1998 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets: Part 10 Measurement of Airborne Noise by the Enveloping Surface Method | 0 | Sep, 2019 | Buy | |
| 105 | IS/ISO 8528 : PART 12 : 1997/ISO 8528-12:1997 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 12 emergency power supply to safety services | 0 | Sep, 2019 | Buy | |
| 106 | IS 9057 : 1998 (2 Revision) |
Automotive vehicles - Exhaust emissions - Carbon monoxide concentration at idling for vehicles equipped with spark ignition engines - Method of measurement (Second Revision) | 0 | Dec, 2017 | Download | |
| 107 | IS 9262 : 1979 |
Recommendations for gear positions for road vehicles | 0 | Nov, 2020 | Download | |
| 108 | IS 9418 : 1980 |
Dimensions for mounting flanges for in - Line fuel injection pumps for multi - Cylinder compressiom ignition engines | 0 | Nov, 2020 | Download | |
| 109 | IS 9420 : Part 1 : 1988 (1 Revision) |
Specification for feed pumps for diesel fuel injection equipment: Part 1 external dimensions(First Revision) | 0 | Sep, 2019 | Download | |
| 110 | IS 9420 : Part 2 : 1988 |
Specification for feed pumps for diesel fuel injection equipment: Part 2 types of drives | 0 | Sep, 2019 | Download | |
| 111 | IS 9465 : 1980 |
Mounting dimensions for in - Line injection pump assemblies for fuel injection equipment for multi - Cylinder compression ignition engines | 1 | Nov, 2020 | Download |