Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Machine Tools-General )
Total Standards : 183
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10188 : 1982/ISO 2934 |
Dimensions for modular units for machine tool construction - Wing bases for columns | 1 | Jan, 2019 | Buy | |
| 2 | IS 10190 : 2018/ISO 1708:1989 (1 Revision) |
Acceptance conditions for general purpose parallel lathes - Testing of the accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 3 | IS 10352 : 2017/ISO 2407:1997 (2 Revision) |
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (Second Revision) | 0 | Mar, 2022 | Buy | |
| 4 | IS 10573 : 1983 |
Specification for oil sight glass for machine tools | 1 | Mar, 2022 | Download | |
| 5 | IS 10574 : 1983 |
Specification for clamp buttons to be used with parallel sided clamp plates | 1 | Mar, 2022 | Download | |
| 6 | IS 10575 : 1983/ISO 3371 |
Dimensions for modular units for machine tool construction - Rotary tables | 0 | Jan, 2019 | Buy | |
| 7 | IS 10576 : 1983/ISO 2769 |
Dimensions for modular units for machine tool construction - Wing bases for slide units | 0 | Jan, 2019 | Buy | |
| 8 | IS 10602 : 1983 |
Specification for floor plates | 1 | Mar, 2022 | Download | |
| 9 | IS 10882 : 1984 |
Specification for cam levers | 0 | Mar, 2022 | Download | |
| 10 | IS 10941 : 1984 |
Sizes for dovetail guideways for machine tools | 0 | Jan, 2019 | Download | |
| 11 | IS 10949 : 1984 |
Code of practice for painting procedure for machine tools | 0 | Jan, 2019 | Download | |
| 12 | IS 11016 : 1984 |
General safety requirements for machine tools and their operation | 0 | Jan, 2019 | Download | |
| 13 | IS 11107 : 1984 |
Dimensions for modular units for machine tool construction - Columns | 0 | Jan, 2019 | Download | |
| 14 | IS 11133 : 1984/ISO 5169 : 1977 |
Recommendations for symbols for lubrications appearing on machine tools | 0 | Jan, 2019 | Buy | |
| 15 | IS 11278 : 1985 |
Specification for jig feet with cylindrical shank | 0 | Mar, 2022 | Download | |
| 16 | IS 11325 : 1985 |
Specification for adjustable clamp support | 0 | Mar, 2022 | Download | |
| 17 | IS 11398 : 2018/ISO 6155 : 1998 |
Machine Tools — Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes — Testing of the Accuracy ( First Revision ) | 0 | ---- | Buy | |
| 18 | IS 11613 : 1986 |
Specification for renewable lock screw locating pins | 0 | Mar, 2022 | Download | |
| 19 | IS 11614 : 1986 |
Specification for renewable threaded locating pins | 0 | Mar, 2022 | Download | |
| 20 | IS 11648 : 1986 |
Nomenclature for modular machine tools | 0 | Jan, 2019 | Download | |
| 21 | IS 11831 : 1986 |
Specification for jig foot bolts | 0 | Mar, 2022 | Download | |
| 22 | IS 11843 : 1986 |
Specification for jig foot nuts | 0 | Mar, 2022 | Download | |
| 23 | IS 11846 : 1987/ISO 3476 |
Dimensions for modular units for machine tool construction - Tenon drive and flanges for mounting multi - Spindle heads | 0 | Jan, 2019 | Buy | |
| 24 | IS 11958 : Part 1 : 2018/ISO 3070-1:2007 (1 Revision) |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 1 machines with fixed column and movable table (First Revision) | 0 | May, 2023 | Buy | |
| 25 | IS 11958 : Part 2 : 2019/ISO 3070-2 : 2015 (1 Revision) |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 2 machines with movable column as long the X - Axis (Floor Type) (First Revision) | 0 | May, 2023 | Buy | |
| 26 | IS 12106 : 1987 |
Dimensions for modular units for machine tool construction - Spindle units | 0 | Jan, 2019 | Download | |
| 27 | IS 12242 : 1987 |
Specification for door hinges for machine tools | 0 | Mar, 2022 | Download | |
| 28 | IS 12250 : 1987 |
Specification for fixed clamp supports | 0 | Mar, 2022 | Download | |
| 29 | IS 12280 : 1988 |
Specification for tenon without counterbore | 0 | Jan, 2019 | Download | |
| 30 | IS 12281 : 1988 |
Mounting dimensions of machine tool doors with hinges | 0 | Jan, 2019 | Download | |
| 31 | IS 12295 : 2000/ISO 3875:2004 (1 Revision) |
Acceptance conditions for external cylindrical centreless grinding machines - Testing of the accuracy (First Revision) | 0 | Sep, 2018 | Buy | |
| 32 | IS 12296 : 1988 |
Test chart for thread rolling machines with cylindrical dies | 0 | Jan, 2019 | Download | |
| 33 | IS 12582 : 1989 |
Tommy screws with fixed bar Specification | 0 | Jan, 2019 | Download | |
| 34 | IS 12647 : 2021/ISO 19085-2 : 2017 (1 Revision) |
Solid Waste Management Collection Equipment Requirements and Guidelines | 0 | ---- | Buy | |
| 35 | IS 12850 : 1987/ISO 3610 : 1976 |
Modular units for machine tool construction - Support brackets | 0 | May, 2023 | Buy | |
| 36 | IS 12871 : 2022/ISO 16092-2 : 2019 (2 Revision) |
COPPER LEAD ZINC AND NICKEL CONCENTRATES SAMPLING PROCEDURES FOR DETERMINATION OF METAL AND MOISTURE CONTENT (Second Revision) | 0 | ---- | Buy | |
| 37 | IS/ISO 13041 : Part 3 : 2009/ISO 13041 : Part 3 : 2009 |
Test conditions for numerically controlled turning machines and turning centres: Part 3 geometric tests for machines with inverted vertical workholding spindles | 0 | Mar, 2022 | Buy | |
| 38 | IS/ISO 13041 : Part 4 : 2004/ISO 13041 : Part 4 : 2004 |
Test conditions for numerically controlled turning machines and turning centres: Part 4 accuracy and repeatability of positioning of linear and rotary axes | 0 | Mar, 2022 | Buy | |
| 39 | IS/ISO 13041 : Part 5 : 2015/ISO 13041-5 : 2015 (1 Revision) |
Test conditions for numerically controlled turning machines and turning centers: Part 5 accuracy of speeds and interpolations (First Revision) | 0 | Jun, 2017 | Buy | |
| 40 | IS/ISO 13041 : Part 6 : 2009/ISO 13041 : Part 6 : 2009 |
Test conditions for numerically controlled turning machines and turning centres: Part 6 accuracy of a finished test piece | 0 | Mar, 2022 | Buy | |
| 41 | IS/ISO 13041 : Part 7 : 2004/ISO 13041 : Part 7 : 2004 |
Test conditions for numerically controlled turning machines and turning centres: Part 7 evaluation of contouring performance in the coordinate planes | 0 | Mar, 2022 | Buy | |
| 42 | IS/ISO 13041 : Part 8 : 2004/ISO 13041-8:2004 |
Test conditions for numerically controlled turning machines and turning centres: Part 8 evaluation of thermal distortions | 0 | Mar, 2022 | Buy | |
| 43 | IS 13088 : 2021/ISO 19085-7 : 2019 (1 Revision) |
Technical product documentation — Representation of splines and serrations (First Revision) | 0 | ---- | Buy | |
| 44 | IS 13178 : 1991 |
Clamping studs for machine tools - Specification | 0 | Mar, 2022 | Download | |
| 45 | IS 13543 : 1992/ISO 2891 : 1997 |
Modular units for machine tool construction - Centre bases and columns | 0 | May, 2023 | Buy | |
| 46 | IS 13552 : 2019/ISO 1985 : 2015 (1 Revision) |
Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 47 | IS 13635 : 1993/ISO 2972 : 1979 |
Numerical control of machines - Symbols | 0 | May, 2023 | Buy | |
| 48 | IS 13929 : 2021/ISO 230-10 : 2016 (1 Revision) |
STAINLESS STEEL DECKING PLATES FOR CANE MUD FILTERS SPECIFICATION | 0 | ---- | Buy | |
| 49 | IS 13934 : 2018/ISO 4703:2001 (1 Revision) |
Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 50 | IS 13998 : 2021/3070-3 : 2007 (1 Revision) |
Multi-Point Diamond Impregnated Dressing Tools — Specification (First Revision of IS 13998 ) | 0 | ---- | Buy | |
| 51 | IS 14863 : 2018/ISO 5608 : 2012 (1 Revision) |
Turning and copying tool holders and cartridges for indexable inserts -- Designation (first revision) | 0 | Aug, 2024 | Buy | |
| 52 | IS 14893 : 2021/ISO 17916 : 2016 (1 Revision) |
Low strain non-destructive integrity testing of piles - Guidelines (first revision) | 0 | ---- | Buy | |
| 53 | IS 1493 : Part 7 : 2022/ISO 19085-6 : 2017 (2 Revision) |
Methods of chemical analysis of iron ores – Part 7 Determination of Lead Content — Flame Atomic Absorption Spectrometric Method (Second Revision) | 0 | ---- | Buy | |
| 54 | IS 15042 : Part 1 : 2021/ISO 6779 : 2019 (3 Revision) |
Financial Services - Personal Identification Number (PIN) Management and Security Part 1: Basic Principal and Requirements for Pins in Card Based Systems (Third Revision) | 0 | Mar, 2022 | Buy | |
| 55 | IS 15246 : 2002/ISO 9524 : 1993 |
Machine tools - Front faces of spindle holders for machining centres - Functional dimensions | 0 | May, 2023 | Buy | |
| 56 | IS 15247 : 2002/ISO 9270 : 1992 |
7/24 tapers for tool shanks for automatic changing - Tapers for spindle noses | 0 | Jan, 2019 | Buy | |
| 57 | IS 15248 : Part 1 : 2013/ISO 3442-1 : 2005 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 1 manually operated chucks with tongue and groove type jaws | 0 | May, 2023 | Buy | |
| 58 | IS 15248 : Part 2 : 2014/ISO 3442-2 : 2005 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 2 power - Operated chucks with tongue and groove type jaws | 0 | Mar, 2019 | Buy | |
| 59 | IS 15248 : Part 3 : 2014/ISO 3442-3 : 2007 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 3 power - Operated chucks with serrated jaws | 0 | Mar, 2019 | Buy | |
| 60 | IS 15250 : Part 3 : 2018/ISO 10791-3 : 1998 |
Test conditions for machining centres: Part 3 geometric tests for machines with integral indexable or continuous universal heads (Vertical Z - Axis) | 0 | May, 2023 | Buy | |
| 61 | IS 15250 : Part 4 : 2018/ISO 10791-4 : 1998 |
Test conditions for machining centres: Part 4 accuracy and repeatability of positioning of linear and rotary axes | 0 | May, 2023 | Buy | |
| 62 | IS 15250 : Part 5 : 2018/ISO 10791-5 : 1998 |
Test conditions for machining centres: Part 5 accuracy and repeatability of positioning of work - Holding pallets | 0 | May, 2023 | Buy | |
| 63 | IS 15250 : Part 6 : 2018/ISO 10791-6 : 2014 |
Test conditions for machining centres: Part 6 accuracy of speeds and interpolations | 0 | May, 2023 | Buy | |
| 64 | IS 15250 : Part 8 : 2018/ISO 10791-8 : 2001 |
Test conditions for machining centres: Part 8 evaluation of contouring performance in the three coordinate planes | 0 | May, 2023 | Buy | |
| 65 | IS 15250 : Part 9 : 2018/ISO 1985 : 2015 |
Test conditions for machining centres: Part 9 evaluation on the operating times of tool change and pallet change | 0 | May, 2023 | Buy | |
| 66 | IS 15299 : 2019/ISO 666 : 2012 (2 Revision) |
Machine tools - Mounting of grinding wheels by means of hub flanges (Second Revision) | 0 | Jun, 2023 | Buy | |
| 67 | IS 15649 : 2006 |
Machine tools chip bins for chip conveyor - Specification | 0 | May, 2023 | Download | |
| 68 | IS 15836 : Part 1 : 2008/ISO 15534-1 : 2000 |
Ergonomic design for the safety of machinery: Part 1 principles for determining the dimensions required for openings for whole - Body access into machinery | 0 | Jun, 2023 | Buy | |
| 69 | IS 15836 : Part 2 : 2008/ISO 15534-2 : 2000 |
Ergonomic design for the safety of machinery: Part 2 principles for determining the dimensions required for access openings | 0 | May, 2021 | Buy | |
| 70 | IS 15836 : Part 3 : 2008/ISO 15534-3 ; 2000 |
Ergonomic design for the safety of machinery: Part 3 anthropometric data | 0 | May, 2021 | Buy | |
| 71 | IS 16816 : 2019/ISO 13854:2017 |
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | 0 | Aug, 2023 | Buy | |
| 72 | IS/ISO 1701-1 : 2004/ISO 1701-1 : 2004 |
Test conditions for milling machines with table of variable height - Testing of the accuracy: Part 1 machines with horizontal spindle | 0 | Mar, 2021 | Buy | |
| 73 | IS/ISO 1701 : Part 2 : 2004/ISO 1701-2 : 2004 |
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy Part 2 Machines with Vertical Spindle | 0 | Mar, 2019 | Buy | |
| 74 | IS 17246 : 2019/ISO 3190 : 1975 |
Test Conditions for Turret and Single Spindle Co-ordinate Drilling Machines with Vertical Spindle — Testing of the Accuracy | 0 | May, 2023 | Buy | |
| 75 | IS 17247 : Part 1 : 2019/ISO 3686-1 : 2000 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle — Testing of the Accuracy Part 1 Single Column Type Machines | 0 | May, 2023 | Buy | |
| 76 | IS 17247 : Part 2 : 2019/ISO 3686-2:2000 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle — Testing of the Accuracy Part 2 Portal Type Machines with Moving Table | 0 | May, 2023 | Buy | |
| 77 | IS 17248 : 2019/ISO 8956 : 1986 |
Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes — Testing of the Accuracy | 0 | May, 2023 | Buy | |
| 78 | IS 17249 : Part 1 : 2019/ISO 11090-1:2014 |
Test Conditions for Die Sinking Electro-Discharge Machine ( Die Sinking EDM ) — Testing of the Accuracy Part 1 Single-Column Machines ( Cross-slide Table Type and Fixed-Table Type ) | 0 | May, 2023 | Buy | |
| 79 | IS 17250 : 2019/ISO 14137 : 2015 |
Test Conditions for Wire Electrical- Discharge Machines ( Wire EDM ) — Testing of the Accuracy | 0 | May, 2023 | Buy | |
| 80 | IS 17251 : Part 1 : 2019/ISO 14955-1 : 2017 |
Machine Tools — Environmental Evaluation of Machine Tools Part 1 Design Methodology for Energy-Efficient Machine Tools | 0 | May, 2023 | Buy | |
| 81 | IS 17251 : Part 2 : 2019/ISO 14995-2:2017 |
Machine Tools - Environmental Evaluation of Machine Tools Part 2 Methods for Measuring Energy Supplied to Machine Tools and Machine Tool Components | 0 | May, 2023 | Buy | |
| 82 | IS 17252 : Part 1 : 2019/ISO 15616-1 : 2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 1 General Principles, Acceptance Conditions | 0 | May, 2023 | Buy | |
| 83 | IS 17252 : Part 2 : 2019/ISO 15616-2:2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 2 Measurement of Static and Dynamic Accuracy | 0 | May, 2023 | Buy | |
| 84 | IS 17252 : Part 3 : 2020/ISO 15616-3 : 2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 3 Calibration of Instruments for Measurement of Gas Flow and Pressure | 0 | ---- | Buy | |
| 85 | IS 17252 : Part 4 : 2020/ISO 15616-4:2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 4 Machines with 2-D Moving Optics | 0 | ---- | Buy | |
| 86 | IS 17254 : 2019/ISO 16093 : 2017 |
Machine Tools — Safety — Sawing Machines for Cold Metal | 0 | May, 2023 | Buy | |
| 87 | IS 17255 : 2019/ISO 16907 : 2015 |
Machine Tools — Numerical Compensation of Geometric Errors | 0 | May, 2023 | Buy | |
| 88 | IS 17256 : Part 1 : 2019/ISO 17243-1 : 2014 |
Machine Tool Spindles — Evaluation of Machine Tool Spindle Vibrations by Measurements on Spindle Housing Part 1 Spindles with Rolling Element Bearings and Integral Drives Operating at Speeds Between 600 min-1 and 30 000 min-1 | 0 | May, 2023 | Buy | |
| 89 | IS 17256 : Part 2 : 2019/ISO 17243-2 : 2017 |
Machine Tool Spindles — Evaluation of Spindle Vibrations by Measurements on non-rotating parts Part 2 Direct-Driven Spindles and Belt-Driven Spindles with Rolling Element Bearings Operating at Speeds Between 600 r / min and 30 000 r / min | 0 | May, 2023 | Buy | |
| 90 | IS 17258 : 2019/ISO 23125 : 2015 |
Machine Tools — Safety — Turning Machines | 0 | May, 2023 | Buy | |
| 91 | IS 17259 : 2020/ISO 28881 : 2013 |
Machine Tools — Safety — Electro-Discharge Machines | 0 | ---- | Buy | |
| 92 | IS 17277 : Part 1 : 2019/ ISO 16092-1:2017 |
Machine Tools Safety — Presses Part 1 General Safety Requirements | 0 | May, 2023 | Buy | |
| 93 | IS 17739 : 2022/ISO 16092-4 : 2019 |
RAW COIR PITH- SPECIFICATIONS | 0 | ---- | Buy | |
| 94 | IS/ISO/IEC 18033 : Part 1 : 2021/ISO/TS 19837:2018 (1 Revision) |
Information security Encryption algorithms Part 1: General First Revision | 0 | ---- | Buy | |
| 95 | IS/ISO 1984 : Part 2 : 2011/ISO 1984 : Part 2 : 2011 |
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy: Part 2 machines with vertical spindle | 0 | Mar, 2022 | Buy | |
| 96 | IS 2013 : 1995 (3 Revision) |
T - Slots - Dimensions and spacings (Third Revision) | 0 | Mar, 2022 | Download | |
| 97 | IS 2014 : 1996 (2 Revision) |
T - Bolts - Specification (Second Revision) | 0 | Mar, 2022 | Download | |
| 98 | IS 2015 : 1977 (1 Revision) |
Specification for t - Nuts (First Revision) | 1 | Mar, 2022 | Download | |
| 99 | IS 2063 : Part 1 : 2016/ISO 230-1:2012 |
Test code for machine tools: Part 1 geometric accuracy of machines operating under No - Load or quasi - Static conditions (Third Revision) | 0 | Mar, 2022 | Buy | |
| 100 | IS 2063 : Part 2 : 2016/ISO 230-2:2014 (3 Revision) |
Test code for machine tools: Part 2 determination of accuracy and repeatability of positioning of numerically controlled axes (First Revision) | 0 | Mar, 2021 | Buy | |
| 101 | IS 2063 : Part 5 : 2016/ISO 230-5 : 2000 |
Test code for machine tools: Part 5 determination of the noise emission | 0 | Mar, 2021 | Buy | |
| 102 | IS 2063 : Part 6 : 2016/ISO 230-6 : 2002 |
Test code for machine tools: Part 6 determination of positioning accuracy on body and face diagonals (Diagonal Displacement Tests) | 0 | Mar, 2021 | Buy | |
| 103 | IS 2063 : Part 8 : 2016/ISO/TR 230-8:2010 |
Test code for machine tools: Part 8 vibrations | 0 | Mar, 2021 | Buy | |
| 104 | IS 2063 : Part 9 : 2016/ISO/TR 230-9:2005 |
Test code for machine tools: Part 9 estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations | 0 | Mar, 2021 | Buy | |
| 105 | IS 207 : 1964 (1 Revision) |
Specification for gate and shutter hooks and eyes (Revised) | 2 | Feb, 2021 | Download | |
| 106 | IS 2161 : 1996 (1 Revision) |
Coolant pumps for general purpose machine tools - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 107 | IS 2182 : 2018/ISO 369:2009 (2 Revision) |
Machine tools - Symbols for indications appearing on machine tools (Second Revision) | 0 | May, 2023 | Buy | |
| 108 | IS 2218 : 1999/ISO 229 : 1973 (1 Revision) |
Speeds and feeds for machine tools (First Revision) | 0 | Sep, 2018 | Buy | |
| 109 | IS 2219 : 1962 |
Feeds for machine tools | 1 | Mar, 2021 | Download | |
| 110 | IS 2367 : 1981 (1 Revision) |
Test chart for box type vertical drilling machines (First Revision) | 0 | Jan, 2019 | Download | |
| 111 | IS 2368 : 2018/ISO 2433:1999 (3 Revision) |
Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy (Third Revision) | 0 | May, 2023 | Buy | |
| 112 | IS 2534 : 1999 (1 Revision) |
Carbide tipped dead centres - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 113 | IS 2582 : Part 1 : 2015/ISO 702 -1 : 2009 (3 Revision) |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 1 conical connection (Third Revision) | 0 | Mar, 2021 | Buy | |
| 114 | IS 2582 : Part 2 : 2016/ISO 702 -2 : 2007 (3 Revision) |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 2 camlock type (Third Revision) | 0 | Mar, 2021 | Buy | |
| 115 | IS 2582 : Part 4 : 2016/ISO 702 -4 : 2004 |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 4 cylindrical connection | 0 | Mar, 2021 | Buy | |
| 116 | IS 2804 : 1998 (1 Revision) |
Palm grips - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 117 | IS 2805 : 1964 |
Dimensions for ball grips | 1 | Mar, 2022 | Download | |
| 118 | IS 2890 : 1983 (1 Revision) |
Specification for taper handles for machine tools (First Revision) | 0 | Mar, 2022 | Download | |
| 119 | IS 2909 : 1998 (1 Revision) |
Star grips - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 120 | IS 2987 : 1992/ISO 447 : 1984 (2 Revision) |
Direction of operation of controls for machine tools - Recommendations (Second Revision) | 0 | May, 2023 | Buy | |
| 121 | IS 2990 : 1986 (1 Revision) |
Specification for tenons (First Revision) | 0 | Mar, 2022 | Download | |
| 122 | IS 2995 : 1988 (1 Revision) |
Specification for set collars (First Revision) | 0 | Jan, 2019 | Download | |
| 123 | IS 3025 : Part 72 : 2022/ISO 19085-3 : 2017 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 72 Determination of Perfluorooctanesulfonate (PFOS) and Perfluorooctanoate (PFOA) | 0 | ---- | Buy | |
| 124 | IS 3025 : Part 73 : 2021/ISO 19085-10 : 2018 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 73 Instrument Based Method for Determination of Total Organic Carbon (TOC), Dissolved Organic Carbon (DOC), Total Bound Nitrogen (TNb) and Dissolved Bound Nitrogen (DNb) | 0 | ---- | Buy | |
| 125 | IS 3048 : 1965 |
Dimensions for handwheels | 0 | Mar, 2022 | Download | |
| 126 | IS 3075 : Part 1 : 1986 (1 Revision) |
Specification for circlips: Part 1 for shafts (First Revision) | 2 | Mar, 2022 | Download | |
| 127 | IS 3075 : Part 2 : 1986 (1 Revision) |
Specification for circlips: Part 2 for bores (First Revision) | 1 | Mar, 2022 | Download | |
| 128 | IS 3075 : Part 3 : 1986 (1 Revision) |
Specification for circlips: Part 3 type e for shafts (First Revision) | 1 | Mar, 2022 | Download | |
| 129 | IS 3793 : 1966 |
Specification for live centres | 1 | Jan, 2019 | Download | |
| 130 | IS/ISO 4043 : 2016/ISO 2772 : 2019 |
SIMULTANEOUS INTERPRETING - MOBILE BOOTHS - REQUIREMENTS | 0 | ---- | Buy | |
| 131 | IS 4291 : 1996 (1 Revision) |
C - Washers - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 132 | IS 4294 : 2018 (2 Revision) |
Jig buttons - Specification (Second Revision) | 0 | May, 2023 | Download | |
| 133 | IS 4295 : 1983 (1 Revision) |
Specification for locking dogs (Catches) with springs (First Revision) | 2 | Mar, 2022 | Download | |
| 134 | IS 4297 : 1996 (1 Revision) |
Spherical washers and conical seats - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 135 | IS 4298 : 2009 (2 Revision) |
Swing C- Washers - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 136 | IS 4299 : 1982 (1 Revision) |
Specification for jig feet (First Revision) | 0 | Mar, 2022 | Download | |
| 137 | IS 4502 : 1999 (1 Revision) |
Machine vices - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 138 | IS 4816 : 1987 (2 Revision) |
Specification for permanent - Magnetic chucks (Second Revision) | 0 | Mar, 2022 | Download | |
| 139 | IS 4921 : 1968 |
Specification for extension bars | 0 | Aug, 2024 | Download | |
| 140 | IS 5030 : Part 1 : 2017/ISO 4875-1 : 2006 (2 Revision) |
Metal cutting band saw blades: Part 1 Vocabulary (second revision) | 0 | ---- | Buy | |
| 141 | IS 5093 : 1996 (1 Revision) |
Locating pins (Round) - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 142 | IS 5094 : 1969 |
Dimensions for diamond locating pins | 0 | Mar, 2022 | Download | |
| 143 | IS 516 : Part 2 : Sec 3 : 2022/ISO 19085-4 : 2018 (1 Revision) |
Hardened Concrete - Methods of Test: Part 2 Properties of Hardened Concrete other than Strength: Section 3 Oxygen Permeability Index ( First Revision ) | 0 | ---- | Buy | |
| 144 | IS 516 : Part 5 : Sec 2 : 2021/ISO 16092-3 : 2017 |
Hardened concrete - Methods of test Part 5 Non-destructive testing: Section 2 Half-cell potentials of uncoated reinforcing steel in concrete (first revision) | 0 | ---- | Buy | |
| 145 | IS/ISO 5170 : 1977/ISO 5170 : 1977 |
Machine tools - Lubrication systems | 0 | May, 2023 | Buy | |
| 146 | IS/ISO 5609 : Part 3 : 2012/ISO 1984-1 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 3 Style K | 0 | Mar, 2022 | Buy | |
| 147 | IS 5919 : 2018/ISO 2238 : 2011 (2 Revision) |
Machine bridge reamers (second revision) | 0 | ---- | Buy | |
| 148 | IS/IEC 60068 : Part 1 : 2013/ISO 239: 1999 |
Environmental Testing Part 1 General and Guidance | 0 | ---- | Buy | |
| 149 | IS 6080 : 1985 (1 Revision) |
Specification for double ended clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 150 | IS 6081 : 1985 (1 Revision) |
Specification for plain clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 151 | IS 6082 : 1985 (1 Revision) |
Specification for slotted clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 152 | IS 6090 : 1984 (1 Revision) |
Specification for cam operated clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 153 | IS 6105 : 1971 |
Specification for feed fingers | 0 | Mar, 2022 | Download | |
| 154 | IS/IEC 61196 : Part 1 : Sec 1 : 2007/ISO 19085-5 : 2017 |
Coaxial communication cables Part 1 Coaxial cables Section 1 Capability approval | 0 | ---- | Buy | |
| 155 | IS 6197 : 2019/ISO 3655 : 1986 (1 Revision) |
Test chart for vertical boring and turning mills with table diameter up to 1600 mm (First Revision) | 0 | May, 2023 | Buy | |
| 156 | IS 6238 : 1971 |
Specification for spring collets | 2 | Mar, 2022 | Download | |
| 157 | IS 6335 : 1971 |
Specification for knurled thumb nuts (Fixtures) | 1 | Mar, 2022 | Download | |
| 158 | IS 6336 : 1989 (1 Revision) |
Screws for thrust pads (Fixtures) - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 159 | IS 6337 : 1989 (1 Revision) |
Thrust - Pads (Fixtures) - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 160 | IS 6338 : 1989 (1 Revision) |
Clamping screws (Fixtures) - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 161 | IS 6440 : 1997 (1 Revision) |
Quick action drilling jigs - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 162 | IS/ISO 6480 : 1983/ISO 6480 : 1983 |
Conditions of acceptance for horizontal internal broaching machines - Testing of the accuracy | 0 | Jan, 2019 | Buy | |
| 163 | IS 7192 : 2022/ ISO 19085-8 : 2017 (1 Revision) |
Citrus Fruits - Guide for Storage (First Revision) | 0 | ---- | Buy | |
| 164 | IS 7249 : 1993/ISO 7568 : 1986 (1 Revision) |
Woodworking machines - Thickness planing machines with rotary cutterblock of one - Side dressing - Nomenclature and acceptance conditions (First Revision) | 0 | Jan, 2019 | Buy | |
| 165 | IS 7286 : 1991/ISO 7950 (1 Revision) |
Test chart for woodworking single chain mortising machines (First Revision) | 0 | Jan, 2019 | Buy | |
| 166 | IS 7289 : 1992/ISO 7569 (1 Revision) |
Test chart for woodworking planing machines for two, three or four - Side dressing (First Revision) | 0 | Jan, 2019 | Buy | |
| 167 | IS 7294 : 1990 (1 Revision) |
Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions First Revision | 0 | Jan, 2019 | Download | |
| 168 | IS 7296 : 1992/ISO 7570 (1 Revision) |
Test chart for woodworking surface planing and thicknessing machines (First Revision) | 0 | Jan, 2019 | Buy | |
| 169 | IS 8107 : 1993/ISO 7948 : 1987 (1 Revision) |
Woodworking machines - Routing machines - Nomenclature and acceptance conditions (First Revision) | 0 | Jan, 2019 | Buy | |
| 170 | IS 8165 : 2010/ISO 5734 : 1986 |
Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 171 | IS 8198 : Part 5 : 2022/ISO 19085-9 : 2019 (2 Revision) |
CODE OF PRACTICE FOR STEEL CYLINDERS FOR COMPRESSED GASES PART 5: LIQUEFIED PETROLEUM GAS LPG | 0 | ---- | Buy | |
| 172 | IS/ISO 8525 : 2008/ISO 8525:2008 |
Airborne noise emitted by machine tools - Operating conditions for metal - Cutting machines | 0 | ---- | Buy | |
| 173 | IS/ISO 8636 : PART 1 : 2000/ISO 8636-1:1987 (1 Revision) |
Machine tools - Test conditions for bridge - Type milling machines - Testing of the accuracy: Part 1 fixed bridge (Portal - Type) machines (First Revision) | 0 | May, 2023 | Buy | |
| 174 | IS/ISO 8636 : Part 2 : 2007/ISO 8636-2 : 2007 |
Machine Tools — Test Conditions for Bridge-Type Milling Machines — Testing of the Accuracy Part 2 Travelling Bridge (Gantry-Type) Machines | 0 | ---- | Buy | |
| 175 | IS 8710 : 1978 |
Specification for electromagnetic chucks | 1 | Mar, 2022 | Download | |
| 176 | IS 8964 : 1999 (1 Revision) |
Safety conditions for woodworking machines - Recommendations (First Revision) | 0 | Jan, 2019 | Download | |
| 177 | IS 9068 : 2021/ISO 6481 : 2019 (1 Revision) |
Textiles - Quantitative chemical analysis - General principles of testing (First Revision) | 0 | ---- | Buy | |
| 178 | IS 9200 : 2021/ISO 18217 : 2015 (2 Revision) |
METHODS OF DISPOSAL OF UNSERVICEABLE COMPRESSED GAS CYLINDERS CODE OF PRACTICE | 0 | ---- | Buy | |
| 179 | IS 9303 : 2021/ISO 19085-1 : 2017 (1 Revision) |
Guide for cold storage of Table Grapes (First Revision) | 0 | ---- | Buy | |
| 180 | IS 9474 : 1980 |
Specification for principles of mechanical guarding of machinery | 1 | Jan, 2019 | Download | |
| 181 | IS 9722 : 1981/ISO 2562 |
Dimensions for modular units for machine tool construction - Slide units | 0 | Jan, 2019 | Buy | |
| 182 | IS 9723 : 1981/ISO 2912 |
Dimensions for modular units for machine tool construction - Multi - Spindle heads - Casing and input drive shaft dimensions | 0 | Jan, 2019 | Buy | |
| 183 | IS 9737 : 1981/ISO 2727 |
Dimensions for modular units for machine tool construction - Headstocks | 0 | Jan, 2019 | Buy |