Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Turning and saw cutting tools )
Total Standards : 101
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10140 : 1982 |
Specification for bandsaw blades for woodworking | 1 | Aug, 2024 | Download | |
| 2 | IS 10255 : 1982 |
Specification for tapered die-sinking cutters with parallel shanks | 0 | Aug, 2024 | Download | |
| 3 | IS 10412 : 1983 |
System of designation and marking of single point cutting tools with carbide tips | 1 | Aug, 2024 | Download | |
| 4 | IS 10591 : 1983 |
Specification for segmental saws for cold sawing | 1 | Aug, 2024 | Download | |
| 5 | IS 11127 : 1984 |
Specification for holders for knurling wheels | 0 | Jan, 2021 | Download | |
| 6 | IS 11143 : 1984 |
Specification for ground high speed steel tool bits | 1 | Aug, 2024 | Download | |
| 7 | IS 11351 : 2005 (1 Revision) |
Stub self-holding tapers -- Dimensions (first revision) | 0 | Jan, 2021 | Download | |
| 8 | IS 11441 : 1985 |
Dimensions for ground carbide rounds | 1 | Jan, 2021 | Download | |
| 9 | IS 11522 : Part 1 : 1986/ISO 3002-1 : 1982 |
Recommendations for basic quantities in cutting and grinding: Part 1 Geometry of the active part of cutting tools, general terms, reference systems, tool and working angles and chip breakers | 0 | Nov, 2018 | Buy | |
| 10 | IS 11741 : 1986 |
Specification for circular saws for wood working | 0 | Aug, 2024 | Download | |
| 11 | IS 11829 : 1986 |
Specification for miniature hand hacksaw blades | 0 | Aug, 2024 | Download | |
| 12 | IS 11835 : Part 1 : 2005 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 1 Dimensions of the driving system of tool shanks (first revision) | 0 | Jan, 2021 | Download | |
| 13 | IS 11835 : Part 2 : 2004/ISO 5414-2 : 2002 (1 Revision) |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 2 Connecting dimensions of chucks and designation (first revision) | 0 | Jan, 2021 | Buy | |
| 14 | IS 11938 : 1987 |
Specification for tool adaptors for numerically controlled machine tools (Tool rotating type) | 1 | Aug, 2024 | Download | |
| 15 | IS 11943 : Part 2 : 1987 |
Specification for hard metal burrs: Part 2 Cylindrical burrs (Type A) | 0 | Nov, 2018 | Download | |
| 16 | IS 11943 : Part 3 : 1987 |
Specification for hard metal burrs: Part 3 Cylindrical round -- (Ball - ) nose burrs (Type C) | 0 | Nov, 2018 | Download | |
| 17 | IS 11943 : Part 4 : 1987 |
Specification for hard metal burrs: Part 4 Spherical burrs (Type D) | 0 | Nov, 2018 | Download | |
| 18 | IS 11943 : Part 5 : 1987 |
Specification for hard metal burrs: Part 5 Oval burrs (Type E) | 0 | Nov, 2018 | Download | |
| 19 | IS 11943 : Part 6 : 1987 |
Specification for hard metal burrs: Part 6 Arch round - (Ball - ) nose burrs (Type F) | 0 | Nov, 2018 | Download | |
| 20 | IS 11943 : Part 7 : 1987 |
Specification for hard metal burrs: Part 7 Arch pointed nose burrs (Type G) | 0 | Nov, 2018 | Download | |
| 21 | IS 11943 : Part 8 : 1987 |
Specification for hard metal burrs: Part 8 Flame burrs (Type H) | 0 | Nov, 2018 | Download | |
| 22 | IS 11943 : Part 9 : 1987 |
Specification for hard metal burrs: Part 9 60° and 90° cone burrs (Type J and K) | 0 | Nov, 2018 | Download | |
| 23 | IS 11943 : Part 10 : 1987 |
Specification for hard metal burrs: Part 10 Conical round -- (Bal -l) nose burrs (Type L) | 0 | Aug, 2024 | Download | |
| 24 | IS 11943 : Part 11 : 1987 |
Specification for hard metal burrs: Part 11 Conical pointed -- Nose burrs (Type M) | 0 | Aug, 2024 | Download | |
| 25 | IS 11943 : Part 12 : 1987 |
Specification for hard metal burrs: Part 12 Inverted cone burrs (Type N) | 0 | Nov, 2018 | Download | |
| 26 | IS 11949 : 1987 |
Specification for turret sockets | 0 | Aug, 2024 | Download | |
| 27 | IS 11950 : 1987 |
Specification for tool adaptors for numerically controlled machine tools (Tool stationary type) | 0 | Aug, 2024 | Download | |
| 28 | IS 12319 : 1988 |
Circular screwing dies -- General table of dimensions | 0 | Aug, 2024 | Download | |
| 29 | IS 12321 : 1988 |
Specification for circular screwing dies for ISO metric threads | 0 | Aug, 2024 | Download | |
| 30 | IS 12322 : 1988 |
Specification for circular screwing dies for taper pipe threads, R - Series | 0 | Aug, 2024 | Download | |
| 31 | IS 12324 : 1988 |
Specification for hexagonal die nuts | 0 | Aug, 2024 | Download | |
| 32 | IS 12325 : 1988 |
Specification for circular screwing dies for ISO metric conduit pipe threads | 1 | Aug, 2024 | Download | |
| 33 | IS 12728 : 1989 |
Carbide tips for dead centres -- Specification | 1 | Aug, 2024 | Download | |
| 34 | IS 13741 : Part 1 : 1993 |
Carbide tips: Part 1 Carbide tips for single point tools -- Specification | 1 | Aug, 2024 | Download | |
| 35 | IS 13741 : Part 2 : 1993 |
Carbide tips: Part 2 Carbide tips for single point tools for light cutting operations -- Specification | 0 | Aug, 2024 | Download | |
| 36 | IS 13741 : Part 3 : 1993 |
Carbide tips: Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification | 0 | Nov, 2018 | Download | |
| 37 | IS 13741 : Part 4 : 1993 |
Carbide tips: Part 4 Carbide tips for multi point tools -- Specification | 0 | Aug, 2024 | Download | |
| 38 | IS 13741 : Part 5 : 1993 |
Carbide tips: Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification | 1 | Nov, 2018 | Download | |
| 39 | IS 13741 : Part 6 : 1993 |
Carbide tips: Part 6 Carbide tips for single point threading tools -- Specification | 0 | Nov, 2018 | Download | |
| 40 | IS 13741 : Part 7 : 1993 |
Carbide tips: Part 7 Carbide tips for single point round nose turning tools -- Speciification | 0 | Nov, 2018 | Download | |
| 41 | IS 13742 : Part 1 : 1993 |
Carbide tipped single point tools ISO series: Part 1 Straight turning tool (ISO 1 ) -- Specification | 0 | Aug, 2024 | Download | |
| 42 | IS 13742 : Part 2 : 1993 |
Carbide tipped single point tools -- ISO series: Part 2 Cranked turning and facing tool (ISO 2) -- Specification | 1 | Dec, 2019 | Download | |
| 43 | IS 13742 : Part 3 : 1993 |
Carbide tipped single point tools -- ISO series: Part 3 Cranked finishing tool (ISO 3) -- Specification | 0 | Aug, 2024 | Download | |
| 44 | IS 13742 : Part 4 : 1993 |
Carbide tipped single point tools -- ISO series: Part 4 Broad turning tool (ISO 4) -- Specification | 0 | Aug, 2024 | Download | |
| 45 | IS 13742 : Part 5 : 1993 |
Carbide tips: Part 5 Carbide tips twist drills with point angle 115 degree -- Specification | 0 | Aug, 2024 | Download | |
| 46 | IS 13742 : Part 6 : 1993 |
Carbide tipped single point tool ISO series: Part 6 Cranked turning tool (ISO 6) -- Specification | 0 | Aug, 2024 | Download | |
| 47 | IS 13742 : Part 7 : 1993 |
Carbide tipped single point tools ISO series: Part 7 Parting off tool (ISO 7) -- Specification | 0 | Aug, 2024 | Download | |
| 48 | IS 13742 : Part 8 : 1993 |
Carbide tipped single point tools -- ISO series: Part 8 boring tool (ISO 8) -- Specification | 1 | Aug, 2024 | Download | |
| 49 | IS 13742 : Part 9 : 1993 |
Carbide tipped single point tools -- ISO series: Part 9 Boring and facing tool (ISO 9) -- Specification | 1 | Aug, 2024 | Download | |
| 50 | IS 13743 : Part 1 to 10 : 1997 |
Carbide tipped single point tools -- Ind series -- Specification | 0 | Aug, 2024 | Download | |
| 51 | IS 13744 : Part 1 to 8 : 1995 |
Carbide tipped single point planing tools -- specification | 1 | Jan, 2021 | Download | |
| 52 | IS 13776 : 1993/ISO 1080 : 1975 |
Machine tools morse taper shanks -- Cotter slots taper keys | 0 | Jun, 2023 | Buy | |
| 53 | IS 15091 : Part 1 : 2002/ISO 9361-1 : 2014 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 1 Dimensions of inserts without fixing hole | 0 | Nov, 2018 | Buy | |
| 54 | IS 15091 : Part 2 : 2004/ISO 9361-2:2011 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 2 dimensions of inserts with cylindrical fixing hole | 0 | Jan, 2021 | Buy | |
| 55 | IS 15094 : 2002/ISO 10910 : 1995 |
Classification and designation of approximate chip control zones for indexable inserts with chip breakers | 0 | Jun, 2023 | Buy | |
| 56 | IS 15144 : 2002 |
Indexable hardmetal (Carbide) inserts with rounded corners with partly cylindrical fixing hole -- Dimensions of inserts with 7° normal clearance for light alloy and plastic components turning | 0 | Aug, 2024 | Download | |
| 57 | IS 15762 : 2007/ISO 5413 : 1993 |
Machine tools -- Positive drive of morse tapers | 0 | Sep, 2017 | Buy | |
| 58 | IS 15777 : 2008 |
Selection of hacksaw tooth for metal cutting -- Recommendations | 0 | Aug, 2024 | Download | |
| 59 | IS B15777 : 2008 |
Selection of Hacksaw Tooth for Metal Cutting – Recommendations | 0 | Aug, 2024 | Download | |
| 60 | IS 16637 : Part 1 : 2018/ISO 5610-1:2010 |
Tool holders with rectangular shank for indexable inserts: Part 1 General survey, correlation and determination of dimensions | 0 | Jun, 2023 | Buy | |
| 61 | IS 16637 : Part 2 : 2018/ISO 5610-2 : 2010 |
Tool holders with rectangular shank for indexable inserts: Part 2 Style A | 0 | Jun, 2023 | Buy | |
| 62 | IS 16637 : Part 4 : 2018/ISO 5610-4:2010 |
Tool holders with rectangular shank for indexable inserts: Part 4 Style D | 0 | Jun, 2023 | Buy | |
| 63 | IS 16637 : Part 5 : 2018/ISO 5610-5:2010 |
Tool holders with rectangular shank for indexable inserts: Part 5 Style F | 0 | Jun, 2023 | Buy | |
| 64 | IS 16637 : Part 6 : 2018/ISO 5610-6:2010 |
Tool holders with rectangular shank for indexable inserts: Part 6 Style G | 0 | Jun, 2023 | Buy | |
| 65 | IS 16637 : Part 7 : 2018/ISO 5610-7:2010 |
Tool holders with rectangular shank for indexable inserts: Part 7 Style J | 0 | Jun, 2023 | Buy | |
| 66 | IS 16637 : Part 8 : 2018/ISO 5610-8:2010 |
Tool holders with rectangular shank for indexable inserts: Part 8 Style K | 0 | Jun, 2023 | Buy | |
| 67 | IS 16637 : Part 9 : 2018/ISO 5610-9:2010 |
Tool holders with rectangular shank for indexable inserts: Part 9 Style l | 0 | Jun, 2023 | Buy | |
| 68 | IS 16637 : Part 10 : 2018/ISO 5610-10:2010 |
Tool Holders with rectangular shank for Indexable Inserts: Part 10 Style N | 0 | Jun, 2023 | Buy | |
| 69 | IS 16637 : Part 11 : 2018/ISO 5610-11:2010 |
Tool holders with rectangular shank for indexable inserts: Part 11 Style R | 0 | Jun, 2023 | Buy | |
| 70 | IS 16637 : Part 12 : 2018/ISO 5610-12:2010 |
Tool holders with rectangular shank for indexable inserts: Part 12 Style S | 0 | Jun, 2023 | Buy | |
| 71 | IS 16637 : Part 13 : 2018/ISO 5610-13:2010 |
Tool holders with rectangular shank for indexable inserts: Part 13 Style T | 0 | Aug, 2024 | Buy | |
| 72 | IS 16637 : Part 14 : 2018/ISO 5610-14:2010 |
Tool holders with rectangular shank for indexable inserts: Part 14 Style H | 0 | Jun, 2023 | Buy | |
| 73 | IS 16637 : Part 15 : 2018/ISO 5610-15:2010 |
Tool holders with rectangular shank for indexable inserts: Part 15 Style V | 0 | Jun, 2023 | Buy | |
| 74 | IS 1715 : 2002 (3 Revision) |
Self-holding tapers -- Dimensions (third revision) | 0 | Aug, 2024 | Download | |
| 75 | IS 1983 : 2004/ISO 241 : 1994 (2 Revision) |
Shank for turning and planing tools -- Shapes and dimensions of the section (second revision) | 0 | Jan, 2021 | Buy | |
| 76 | IS 2428 : 2007/ISO 513 : 2004 (2 Revision) |
Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application (second revision) | 0 | Sep, 2017 | Buy | |
| 77 | IS 2594 : 2003 (2 Revision) |
Hacksaw blades -- Specification (second revision) | 0 | Aug, 2024 | Download | |
| 78 | IS 3019 : 1973 (1 Revision) |
Specification for high speed steel butt -- Welded single point turning tools (first revision) | 3 | Aug, 2024 | Download | |
| 79 | IS 4022 : 1996/ISO 883 : 1985 (2 Revision) |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions (second revision) | 0 | Jan, 2021 | Buy | |
| 80 | IS 4914 : 1983 (1 Revision) |
Specification for tap wrenches adjustable (first revision) | 4 | Aug, 2024 | Download | |
| 81 | IS 5030 : Part 2 : 2016/ISO 4875-2 : 2006 (2 Revision) |
Metal cutting band saw blades: Part 2 Characteristics and dimensions (second revision) | 0 | Jan, 2021 | Buy | |
| 82 | IS 5030 : Part 3 : 2005 (1 Revision) |
Metal cutting bandsaw blade -- Specification: Part 3 Dimensions and other requirements (second revision) | 1 | Jan, 2021 | Download | |
| 83 | IS 5031 : 1992 (2 Revision) |
Saws -- Metal slitting -- Specification (second revision) | 0 | Aug, 2024 | Download | |
| 84 | IS 5362 : 1969 |
Specification for twist drills, parallel shanks, stub series, left hand cutting tor automatics | 1 | Aug, 2024 | Download | |
| 85 | IS 5364 : 1969 |
Specification for twist drills for taper pin holes with taper 1 : 50 | 0 | Aug, 2024 | Download | |
| 86 | IS 5365 : 1991 (2 Revision) |
Core drills, parallel shanks -- Specification (second revision ) | 0 | Nov, 2018 | Download | |
| 87 | IS 5366 : 1978 (1 Revision) |
Specification for core drills, morse taper shanks (first revision) | 2 | Aug, 2024 | Download | |
| 88 | IS 5444 : 1978 (1 Revision) |
Specification for parallel hand reamers with parallel shanks (first revision) | 2 | Nov, 2018 | Download | |
| 89 | IS 5445 : 1978 (1 Revision) |
Specification for long fluted machine reamers with morse taper shanks (first revision) | 2 | Nov, 2018 | Download | |
| 90 | IS 6776 : 1980 (1 Revision) |
Specification for knurling wheels (first revision) | 1 | Aug, 2024 | Download | |
| 91 | IS 7262 : 1996 (1 Revision) |
Turning mandrels - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 92 | IS/ISO 7388 : Part 1 : 2007/ISO 7388-1 : 2007 |
Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF | 0 | Jun, 2023 | Buy | |
| 93 | IS/ISO 7388 : Part 2 : 2007/ISO 7388 : Part 2 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF | 0 | Jun, 2023 | Buy | |
| 94 | IS/ISO 7388 : Part 3 : 2007/ISO 7388-3 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF | 0 | Nov, 2018 | Buy | |
| 95 | IS 7773 : 1975 |
Holding dimensions for broaching tools | 0 | Aug, 2024 | Download | |
| 96 | IS 7778 : Part 7 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision) | 0 | Aug, 2024 | Download | |
| 97 | IS 7778 : Part 8 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 8 Saws (first revision) | 0 | Aug, 2024 | Download | |
| 98 | IS 7778 : Part 9 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision) | 0 | Aug, 2024 | Download | |
| 99 | IS 7778 : Part 10 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision) | 0 | Aug, 2024 | Download | |
| 100 | IS 7778 : Part 11 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision) | 0 | Aug, 2024 | Download | |
| 101 | IS 8842 : 1978 |
Specification for high speed steel butt - Welded single point planing tools | 1 | Aug, 2024 | Download |