Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Milling & Gear Cutting Tools )
Total Standards : 98
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10293 : 1982 |
Dimensions for optional recess on morse taper shanks for tools | 0 | Nov, 2018 | Download | |
| 2 | IS 10465 : 1983 |
Specification for chain wheel rotary tooth form milling cutter | 1 | Nov, 2018 | Download | |
| 3 | IS 10514 : 1983 |
Specification for split taper socket for tools with parallel shank and driving tenon | 0 | Nov, 2018 | Download | |
| 4 | IS 10571 : 1983 |
Specification for split taper sockets for tools with parallel shank, driving square and driving tenon | 0 | Nov, 2018 | Download | |
| 5 | IS 10608 : 1998 (1 Revision) |
Spline hobs -- Straight sided specification (first revision) | 0 | Nov, 2018 | Download | |
| 6 | IS 11172 : Part 1 : 2018/ISO 10889-1 : 2004 (1 Revision) |
Tool holders with cylindrical shank: Part 1 Cylindrical shank, location bore -- Specification (first revision) | 0 | ---- | Buy | |
| 7 | IS 11523 : 1998/ISO 3365 : 1985 (1 Revision) |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 8 | IS 11677 : 2004/ISO 3364 : 2011 (1 Revision) |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions (first revision) | 0 | Jan, 2021 | Buy | |
| 9 | IS 12354 : 2002/ISO 6987: 1998 (1 Revision) |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 10 | IS 12536 : 1989 |
Small tools -- Disc type gear shaper cutters -- Specification | 0 | Nov, 2018 | Download | |
| 11 | IS 12537 : 1989 |
Small tools -- Shank type gear shaper cutter -- Specification | 0 | Nov, 2018 | Download | |
| 12 | IS 12538 : 1989 |
Small tools -- Shank type gear shaper cutter -- Specification | 0 | Nov, 2018 | Download | |
| 13 | IS 12716 : 2002 (1 Revision) |
End mills with indexable specification (first revision) | 0 | Nov, 2018 | Download | |
| 14 | IS 13167 : 1991 |
Side and face milling cutters with indexable inserts -- Specification | 0 | Nov, 2018 | Download | |
| 15 | IS 13244 : 1991 |
Half side and face cutters with indexable inserts -- Specification | 0 | Jan, 2021 | Download | |
| 16 | IS 13303 : 1992 |
Countersinks 60-degree, 90-degree and 120-degree with morse taper shank -- Specification | 0 | Nov, 2018 | Download | |
| 17 | IS 13304 : 1992 |
Countersinks 60°,90° and 120° with parallel shank -- Specification | 0 | Nov, 2018 | Download | |
| 18 | IS 14532 : 1998/ISO 3936 : 1993 |
Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions | 0 | Jun, 2023 | Buy | |
| 19 | IS 14585 : 1998 |
Spline hobs -- Involute sided -- Specification | 0 | Nov, 2018 | Download | |
| 20 | IS 14586 : 1998 |
Serration hobs -- Straight sided -- Specification | 0 | Nov, 2018 | Download | |
| 21 | IS 14867 : 2000/ISO 5611 : 1995 |
Cartridges, type A, for indexable inserts -- Dimensions | 0 | Jan, 2021 | Buy | |
| 22 | IS 14867 : Part 2 : 2019/ISO 5611-4 |
Cartridges, type A, for indexable inserts: Part 2 Style F | 0 | Jun, 2023 | Buy | |
| 23 | IS 14867 : Part 3 : 2019/ISO 5611-3 : 2015 |
Cartridges, type A, for indexable inserts: Part 3 Style G | 0 | Jun, 2023 | Buy | |
| 24 | IS 14867 : Part 4 : 2019/ISO 5611-4 |
Cartridges, type A, for indexable inserts: Part 4 Style J | 0 | Jun, 2023 | Buy | |
| 25 | IS 14867 : Part 5 : 2019/ISO 5611-5 : 2015 |
Cartridges, type A, for indexable inserts: Part 5 Style K | 0 | Jun, 2023 | Buy | |
| 26 | IS 14867 : Part 6 : 2019/ISO 5611-6 : 2015 |
Cartridges, type A, for indexable inserts: Part 6 Style l | 0 | Jun, 2023 | Buy | |
| 27 | IS 14867 : Part 7 : 2019/ISO 5611-7 : 2015 |
Cartridges, type A, for indexable inserts: Part 7 Style R | 0 | Jun, 2023 | Buy | |
| 28 | IS 14867 : Part 8 : 2019/ISO 5611-8 : 2015 |
Cartridges, type A, for indexable inserts: Part 8 Style S | 0 | Jun, 2023 | Buy | |
| 29 | IS 14867 : Part 10 : 2019/ISO 5611-10 : 2015 |
Cartridges, type A, for indexable inserts: Part 10 Style U | 0 | Jun, 2023 | Buy | |
| 30 | IS 14867 : Part 11 : 2019/ISO 5611-11 : 2015 |
Cartridges, type A, for indexable inserts: Part 11 Style W | 0 | Jun, 2023 | Buy | |
| 31 | IS 14867 : Part 12 : 2019/ISO 5611-12 : 2015 |
Cartridges, type A, for indexable inserts: Part 12 Style Y | 0 | Jun, 2023 | Buy | |
| 32 | IS 15067 : 2001 |
End mills with brazed helical hard metal tips -- Dimensions | 0 | Nov, 2018 | Download | |
| 33 | IS 16136 : 2013 |
Solid carbide end mills with continuous parallel shank -- Specification | 0 | Nov, 2018 | Download | |
| 34 | IS 16435 : 2017 |
Solid carbide end mills with stepped parallel shank -- Specification | 0 | ---- | Download | |
| 35 | IS 16992 : Part 1 : 2018/ISO 13399-1 : 2006 |
Cutting tool data representation and exchange: Part 1 Overview, fundamental principles and general information model | 0 | Jun, 2023 | Buy | |
| 36 | IS 17024 : Part 2 : 2018/ISO 8688-2 : 1989 |
Tool life testing in milling: Part 2 End milling | 0 | Jun, 2023 | Buy | |
| 37 | IS 17025 : 2018/ISO 15641 : 2001 |
Milling cutters for high speed machining -- Safety requirements | 0 | Jun, 2023 | Buy | |
| 38 | IS 17026 : 2018/ISO 22037 : 2007 |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions | 0 | Jun, 2023 | Buy | |
| 39 | IS 17028 : 2018/ISO 15917 : 2012 |
Solid ball -- Nosed end mills with cylindrical shanks, made of carbide and ceramic materials | 0 | Jun, 2023 | Buy | |
| 40 | IS 17047 : Part 1 : 2018/ISO 8688-1 : 1989 |
Tool life testing in milling: Part 1 Face milling | 0 | Jun, 2023 | Buy | |
| 41 | IS 1850 : 1961 |
Dimensions for shank diameters and driving squares for rotating tools | 1 | Nov, 2018 | Download | |
| 42 | IS 2340 : 1972 (1 Revision) |
Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision) | 2 | Jan, 2021 | Download | |
| 43 | IS 2668 : 2004/ISO 3337 : 2000 (1 Revision) |
T-slot cutters with cylindrical shanks and with morse taper shanks having tapped hole (second revision) | 1 | Jan, 2021 | Buy | |
| 44 | IS 2669 : 1971 (1 Revision) |
Specification for woodruff keyslot milling cutters with parallel shank (first revision) | 1 | Nov, 2018 | Download | |
| 45 | IS 2670 : 1991 |
Thread milling cutter shell type specification (first revision) | 0 | Nov, 2018 | Download | |
| 46 | IS 2671 : 1964 |
Specification for interlocked milling cutters | 0 | Nov, 2018 | Download | |
| 47 | IS 5360 : 1969 |
Dimensions for driving tenons | 0 | Nov, 2018 | Download | |
| 48 | IS 5568 : 1978 (1 Revision) |
Dimensions for tenons and cross -- Slots with taper bore 1 : 30 (first revision) | 1 | Jun, 2023 | Download | |
| 49 | IS 5693 : 1988 (1 Revision) |
Specification for countersinks 90°, with parallel shanks and solid pilots (first revision) | 1 | Nov, 2018 | Download | |
| 50 | IS 5698 : 1970 |
Specification for rotary form - relieved gear cutters for spur and helical gears | 3 | Nov, 2018 | Download | |
| 51 | IS 5703 : 1988 (1 Revision) |
Specification for countersinks 90° with morse taper shanks and detachable pilots (first revision) | 0 | Nov, 2018 | Download | |
| 52 | IS 5704 : 1988 (1 Revision) |
Specification for counterbores with parallel shanks and solid pilots (first revision) | 0 | Nov, 2018 | Download | |
| 53 | IS 5705 : 1988 (1 Revision) |
Specification for detachable pilots for use with counterbores and countersink 90 degree (first revision) | 2 | Nov, 2018 | Download | |
| 54 | IS 5710 : 1988 (1 Revision) |
Specification for counterbores with morse taper shanks and detachable pilots (first revision) | 0 | Nov, 2018 | Download | |
| 55 | IS 5927 : 1981 (1 Revision) |
Specification for reduction sleeves 7/24 tapers to morse tapers (first revision) | 0 | Nov, 2018 | Download | |
| 56 | IS 5936 : 1981 (1 Revision) |
Specification for arbors with morse taper shanks for shell tools (first revision) | 0 | Nov, 2018 | Download | |
| 57 | IS 5989 : 1998 (2 Revision) |
Hole mills -- Specification (second revision) | 0 | Nov, 2018 | Download | |
| 58 | IS 6255 : 2013 (3 Revision) |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks (third revision) | 0 | Nov, 2018 | Download | |
| 59 | IS 6256 : 1995 (1 Revision) |
Shell end single angle milling cutters -- Specification (first revision) | 0 | Jan, 2021 | Download | |
| 60 | IS 6257 : 1982 (1 Revision) |
Specification for shell end mills (first revision) | 0 | Nov, 2018 | Download | |
| 61 | IS 6285 : 1971 |
Dimensions for interchangeability of milling cutters and milling arbors with key drive | 1 | Nov, 2018 | Download | |
| 62 | IS 6308 : 1982 (1 Revision) |
Specification for side and face milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 63 | IS 6309 : 1982 (1 Revision) |
Specification for cylindrical milling cutters (first revision) | 1 | Nov, 2018 | Download | |
| 64 | IS 6310 : 1971 |
Dimensions for interchangeability of milling cutters and milling arbors with tenon drive | 1 | Nov, 2018 | Download | |
| 65 | IS 6314 : 1982 (1 Revision) |
Specification for single corner rounding milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 66 | IS 6322 : 1982 (1 Revision) |
Specification for concave milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 67 | IS 6323 : 1982 (1 Revision) |
Specification for convex milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 68 | IS 6324 : 1971 |
Specification for single angle milling cutters | 0 | Nov, 2018 | Download | |
| 69 | IS 6325 : 1971 |
Specification for double angle milling cutters | 0 | Nov, 2018 | Download | |
| 70 | IS 6326 : 1996 (1 Revision) |
Equal angle milling cutters -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 71 | IS 6353 : 2014 (2 Revision) |
End mills with parallel shank -- Specification (second revision) | 0 | Dec, 2019 | Download | |
| 72 | IS 6355 : 1982 (1 Revision) |
Specification for keyway milling cutters (first revision) | 1 | Nov, 2018 | Download | |
| 73 | IS/ISO 6462 : 2011/ISO 6462 : 2011 (1 Revision) |
Face milling cutters with indexable inserts -- Dimensions | 0 | Dec, 2019 | Buy | |
| 74 | IS 6550 : 1992 (1 Revision) |
Thread milling cutter with parallel shank -- Specification (first revision) | 1 | Nov, 2018 | Download | |
| 75 | IS 6551 : 1992 (1 Revision) |
Thread milling cutters with morse taper shanks -- Specification (first revision) | 3 | Nov, 2018 | Download | |
| 76 | IS 6681 : 1972 |
Dimensions for self-release 7/24 tapers for spindle noses for milling machines | 2 | Nov, 2018 | Download | |
| 77 | IS 6682 : 1991 (1 Revision) |
Morse taper extension sockets -- Specification (first revision) | 1 | Nov, 2018 | Download | |
| 78 | IS 6702 : 1991 (1 Revision) |
Morse taper reduction sleeves specification (first revision) | 2 | Nov, 2018 | Download | |
| 79 | IS 7778 : Part 3 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision) | 0 | Nov, 2018 | Download | |
| 80 | IS 7778 : Part 5 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 5 Milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 81 | IS 7778 : Part 6 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision) | 0 | Nov, 2018 | Download | |
| 82 | IS 8407 : 2010 (1 Revision) |
Acceptance conditions for gear hobbing machines - Testing of the accuracy (First Revision) | 0 | May, 2023 | Download | |
| 83 | IS 8614 : Part 1 : 2013/ISO 839-1 : 2006 (2 Revision) |
Milling machine arbors with 7/24 tapers: Part 1 Dimensions and designation (second revision) | 0 | Jun, 2023 | Buy | |
| 84 | IS 8616 : 1993 (1 Revision) |
Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 85 | IS 8618 : 1977 |
Specification for spacing collars for milling arbors | 1 | Nov, 2018 | Download | |
| 86 | IS 8619 : 1977 |
Specification for bearing collars for milling arbors | 1 | Nov, 2018 | Download | |
| 87 | IS 8620 : 1993 (1 Revision) |
Clamping nuts for milling arbors specification (first revision) | 0 | Jun, 2023 | Download | |
| 88 | IS 8621 : 1977 |
Specification for retaining screw for milling arbors | 1 | Nov, 2018 | Download | |
| 89 | IS 8692 : Part 1 : 2004/ISO 3338-1 : 1996 (1 Revision) |
Cylindrical shanks for milling cutters: Part 1 Dimensional characteristics of plain cylindrical shanks (first revision) | 0 | Jan, 2021 | Buy | |
| 90 | IS 8692 Part 2 : 2013/ISO3338-2 : 2007 (2 Revision) |
Cylindrical shanks for milling cutters: Part 2 Dimensional characteristics of flatted cylindrical shanks(first revision) | 0 | Nov, 2018 | Buy | |
| 91 | IS 8692 : Part 3 : 2007/ISO 3338-3 : 1996 |
Cylindrical shanks for milling cutters: Part 3 Dimensional characteristics of threaded shanks | 0 | Jun, 2023 | Buy | |
| 92 | IS 8732 : 2003/ISO 2490 : 1996 (1 Revision) |
Single -- Start solid (Monobloc) gear nobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 93 | IS 8733 : 1978 |
Tolerances for single start gear hobs | 0 | Mar, 2023 | Download | |
| 94 | IS 8918 : 1978 |
Dimensions for spindle noses for adjustable adaptors | 0 | Nov, 2018 | Download | |
| 95 | IS 9323 : 1991 (1 Revision) |
Carbide tipped end mills with parallel shanks -- specification (first revision) | 1 | Nov, 2018 | Download | |
| 96 | IS 9324 : 1991 (1 Revision) |
Carbide tipped end mlls with morse taper shanks -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 97 | IS 9326 : 1996 (1 Revision) |
Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 98 | IS 9897 : 2013/ISO 1832 : 2004 (3 Revision) |
Indexable inserts for cutting tools -- Designation (third revision) | 0 | Nov, 2018 | Buy |