Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 208
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 10372 : 1982 Reviewed In : 2019 |
Specification for lock - Grip pliers | 0 | Jun, 2019 | Download | |
| 2 |
IS 10375 : 1982 Reviewed In : 2021 |
Specification for poker | 1 | Mar, 2021 | Download | |
| 3 |
IS 10826 : 1984 Reviewed In : 2021 |
Specification for pad saw | 1 | Mar, 2021 | Download | |
| 4 |
IS 10827 : 1984 Reviewed In : 2021 |
Specification for roving punches | 1 | Mar, 2021 | Download | |
| 5 |
IS 10838 : 1984 Reviewed In : 2021 |
Specification for nylon faced hammers | 1 | Mar, 2021 | Download | |
| 6 |
IS 10839 : 1984 Reviewed In : 2021 |
Jewellers' Saw | 1 | Mar, 2021 | Download | |
| 7 |
IS 10860 : 1984 Reviewed In : 2021 |
Carpenters' Wooden Bodied Bead Planes | 1 | Mar, 2021 | Download | |
| 8 |
IS 10883 : 1984 Reviewed In : 2021 |
Specification for single wheel type pipe cutters | 1 | Mar, 2021 | Download | |
| 9 |
IS 10886 : 1984 Reviewed In : 2021 |
Carpenters' Vice | 1 | Mar, 2021 | Download | |
| 10 |
IS 11250 : 1985 Reviewed In : 2021 |
Specification for bow saw frames | 0 | Mar, 2021 | Download | |
| 11 |
IS 11251 : 1985 Reviewed In : 2021 |
Specification for bow saw blades | 0 | Mar, 2021 | Download | |
| 12 |
IS 11379 : 1985 Reviewed In : 2021 |
Specification for wrenches for retaining screw for milling arbor | 0 | Mar, 2021 | Download | |
| 13 |
IS 11381 : 1985 Reviewed In : 2021 |
Specification for extractor cotter pin | 1 | Mar, 2021 | Download | |
| 14 |
IS 11458 : 1985 Reviewed In : 2021 |
Specification For Parallel Clamps | 1 | Mar, 2021 | Download | |
| 15 |
IS 11526 : 2013 Reviewed In : 2024 (First Revision) |
Pliers and nippers - Nomenclature (First Revision) | 0 | Aug, 2024 | Download | |
| 16 |
IS 11828 : 1987 Reviewed In : 2020 |
Specification for miniature hand hacksaw frames | 0 | Feb, 2020 | Download | |
| 17 |
IS 11847 : 1987 Reviewed In : 2020 |
Specification for spoke wrenches for bicycle and moped | 0 | Feb, 2020 | Download | |
| 18 |
IS 11848 : 1987 Reviewed In : 2020 |
Specification for crowfoot spanners | 0 | Feb, 2020 | Buy | |
| 19 |
IS 11874 : 1986 Reviewed In : 2024 |
Specification for . hexagonal socket offset wrenches | 0 | Aug, 2024 | Download | |
| 20 |
IS 11940 : 1987 Reviewed In : 2024 |
Specification for hide - Faced hammers | 0 | Aug, 2024 | Download | |
| 21 |
IS 11941 : 1987 Reviewed In : 2021 |
Specification For Hand Burnishers | 1 | Mar, 2021 | Download | |
| 22 |
IS 12127 : 1987 Reviewed In : 2021 |
Specification for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 23 |
IS 12128 : 1987 Reviewed In : 2021 |
Specification for reversible handles for cross cut saws | 0 | Mar, 2021 | Download | |
| 24 |
IS 12153 : 1987 Reviewed In : 2024 |
Specification for adapters for hexagonal insert bits for use with ratchet screw drivers | 0 | Aug, 2024 | Download | |
| 25 |
IS 12166 : 1987 Reviewed In : 2020 |
Specification for ratchet screwdrivers | 0 | Feb, 2020 | Download | |
| 26 |
IS 12167 : 1987 Reviewed In : 2020 |
Specification for spiral ratchet screw drivers | 0 | Feb, 2020 | Download | |
| 27 |
IS 12168 (Part 1) : 1987 Reviewed In : 2020 |
Specification for screwdriver bits for use with ratchet screwdrivers: Part 1 for slotted head screws | 0 | Feb, 2020 | Buy | |
| 28 |
IS 12168 (Part 2) : 1987 Reviewed In : 2020 |
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws | 0 | Feb, 2020 | Buy | |
| 29 |
IS 12403 : 1988 Reviewed In : 2020 |
Specification for spanners for conveyor belt - Fasteners | 0 | Feb, 2020 | Download | |
| 30 |
IS 12412 : 1988 Reviewed In : 2021 |
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws | 0 | Mar, 2021 | Download | |
| 31 |
IS 12413 : 1988 Reviewed In : 2021 |
Specification for wooden jointer for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 32 |
IS 12453 : 1988 Reviewed In : 2020 |
Specification for nut drivers | 0 | Feb, 2020 | Download | |
| 33 |
IS 12470 : 1988 Reviewed In : 2020 |
Specification for square drive extension for hexagon insert bits for power socket wrenches | 0 | Feb, 2020 | Buy | |
| 34 |
IS 12476 : 1988 Reviewed In : 2020 |
Specification for hexagon drive extensions (Adaptors) for hexagon insert bits for power socket wrenches | 0 | Feb, 2020 | Download | |
| 35 |
IS 12480 : 1988 Reviewed In : 2020 |
Specification for spiral tapered screw extractors | 0 | Feb, 2020 | Download | |
| 36 |
IS 12481 : 1988 Reviewed In : 2020 |
Specification for hexagonal insert bits for hexagon socket head cap screws and hexagon socket set screws for power tools | 0 | Feb, 2020 | Download | |
| 37 |
IS 12515 : 1988 Reviewed In : 2021 |
Specification for wooden setting cat for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 38 |
IS 12521 : 2018 ISO 6788 : 1997 Reviewed In : 2024 ISO 6788 : 1997 (First Revision) |
Assembly tool for screws and nuts - Four - Way socket wrenches - Dimensions and torque test (First Revision) | 0 | Aug, 2024 | Buy | |
| 39 |
IS 12522 : 1988 Reviewed In : 2020 |
Specification for rubber mallets | 0 | Feb, 2020 | Download | |
| 40 |
IS 12577 : 1989 Reviewed In : 2024 |
Sealing pliers - Specification | 0 | Aug, 2024 | Download | |
| 41 |
IS 12578 : 1989 Reviewed In : 2021 |
Watch Maker's Hammer, Flat Face | 0 | Mar, 2021 | Download | |
| 42 |
IS 12858 : 1989 Reviewed In : 2021 |
Belt punches for conveyor belt fasteners (Plate type) - Specification | 0 | Mar, 2021 | Download | |
| 43 |
IS 12985 : 1990 Reviewed In : 2021 |
Nippers, end - Cutting - Toggle lever assisted - Specification | 0 | Mar, 2021 | Buy | |
| 44 |
IS 13040 : 1991 Reviewed In : 2021 |
Dolly blocks for use in steel body repairs - General requirements | 0 | Mar, 2021 | Download | |
| 45 |
IS 13093 : 2002 Reviewed In : 2021 (First Revision) |
Sheet metal body repair steel hammers - General requirements (First Revision) | 0 | Mar, 2021 | Download | |
| 46 |
IS 13189 : 1991 Reviewed In : 2024 |
Lead hammers - Specification | 0 | Aug, 2024 | Download | |
| 47 |
IS 13323 : 2018 ISO 9343 : 2004 Reviewed In : 2024 ISO 9343 : 2004 (First Revision) |
Pliers and nippers - Slip joint pliers - Dimensions and test values (First Revision) | 0 | Aug, 2024 | Buy | |
| 48 |
IS 13345 : 1992 Reviewed In : 2024 |
Carpenter’s Bevels - Specification | 0 | Aug, 2024 | Download | |
| 49 |
IS 13379 : 1992 Reviewed In : 2021 |
Forestry tools - Wooden setting cat, bow saw blades - Specification | 0 | Mar, 2021 | Download | |
| 50 |
IS 13380 : 1992 Reviewed In : 2021 |
Forestry tools - Hole punch, bow saw blades - Specification | 0 | Mar, 2021 | Download | |
| 51 |
IS 13610 : 2018 ISO 8979 : 2004 Reviewed In : 2024 ISO 8979 : 2004 (First Revision) |
Pliers and Nippers for Electronics - Nomenclature (First Revision) | 0 | Aug, 2024 | Buy | |
| 52 |
IS 13636 : 1993 Reviewed In : 2024 |
Pliers and nippers for electronics - Technical supply conditions | 0 | Aug, 2024 | Buy | |
| 53 |
IS 13761 : 1993 Reviewed In : 2024 |
Pliers and nippers for electronics - Single purpose nippers - End cutting nippers - Specification | 0 | Aug, 2024 | Buy | |
| 54 |
IS 13762 : 1993 Reviewed In : 2024 |
Pliers and nippers for electronics - Single purpose nippers - Diagonal cutting nippers - Specification | 0 | Aug, 2024 | Buy | |
| 55 |
IS 13763 : 1993 Reviewed In : 2024 |
Pliers and nippers for electronics - Single purpose nippers - Oblique cutting nippers - Specification | 0 | Aug, 2024 | Buy | |
| 56 |
IS 13764 : 1993 Reviewed In : 2024 |
Pliers and nippers for electronics - Single purpose pliers - Round nose pliers - Specification | 0 | Aug, 2024 | Buy | |
| 57 |
IS 13765 : 1993 Reviewed In : 2020 |
Pliers and nippers for electronics - Single purpose pliers - Flat nose pliers - Specification | 0 | Feb, 2020 | Buy | |
| 58 |
IS 13766 : 1993 Reviewed In : 2020 |
Pliers and nippers for electronics - Single purpose pliers - Snipe nose pliers - Specification | 0 | Feb, 2020 | Buy | |
| 59 |
IS 13887 : 1993 Reviewed In : 2020 |
Nippers - Lever assisted - Diagonal cutting - Specification | 0 | Feb, 2020 | Buy | |
| 60 |
IS 13888 : 1993 Reviewed In : 2020 |
Nippers - Lever assisted - End cutting - Specification | 0 | Feb, 2020 | Buy | |
| 61 |
IS 15385 : 2003 ISO 2726 : 1995 Reviewed In : 2021 ISO 2726 : 1995 |
Wood working tools - Metal - Bodied bench planes, plane cutters and cap irons | 0 | Mar, 2021 | Buy | |
| 62 |
IS 16486 : 2017 Reviewed In : 2024 |
Method for calibration and classification of torque measuring devices including torque wrench tester | 0 | Aug, 2024 | Download | |
| 63 |
IS 1759 : 1986 Reviewed In : 2024 (Second Revision) |
Specification for powrahs (Second Revision) | 2 | Aug, 2024 | Download | |
| 64 |
IS 17756 : 2021 ISO/IEC 11179-4: 2004 |
ASSEMBLY TOOLS FOR SCREWS AND NUTS RATCHETING WRENCHES TECHNICAL REQUIREMENTS | 0 | ---- | Buy | |
| 65 |
IS 1930 : 2003 ISO 2729 : 1995 Reviewed In : 2019 ISO 2729 : 1995 (Third Revision) |
Woodworking tools - Chisels and gouges (Third Revision) | 0 | Jun, 2019 | Buy | |
| 66 |
IS 1931 : 2000 Reviewed In : 2021 (Third Revision) |
ENGINEER’S FILES — SPECIFICATION ( Third Revision) | 1 | Mar, 2021 | Download | |
| 67 |
IS 2027 : 2023 (Fourth Revision) |
ASSEMBLY TOOLS FOR SCREWS AND NUTS WRENCH AND SOCKET OPENINGS TOLERANCES FOR GENERAL USE | 0 | ---- | Buy | |
| 68 |
IS 2028 : 2004 Reviewed In : 2019 (Fifth Revision) |
Open jaw wrenches (Spanners) - Specification (Fijih Revision) | 0 | Jun, 2019 | Buy | |
| 69 |
IS 2029 : 1998 Reviewed In : 2024 (Fourth Revision) |
Ring wrenches (Spanners) - Specification (Fourth Revision) | 1 | Aug, 2024 | Buy | |
| 70 |
IS 2030 : 1989 Reviewed In : 2024 (Second Revision) |
Box spanners - Specification (Second Revision) | 1 | Aug, 2024 | Buy | |
| 71 |
IS 2586 : 1986 Reviewed In : 2024 (Second Revision) |
Specification for bench vices (Second Revision) | 1 | Aug, 2024 | Download | |
| 72 |
IS 2587 : 1975 Reviewed In : 2024 (First Revision) |
Specification for pipe vices (Open Side Type And Fixed Sides Type) (First Revisicn) | 0 | Aug, 2024 | Download | |
| 73 |
IS 2588 : 1975 Reviewed In : 2019 (First Revision) |
Specification for Blacksmiths vice ( First Revision ) | 0 | Jun, 2019 | Download | |
| 74 |
IS 2615 (Part 1) : 2023 |
Pliers and nippers � Part 1 : General technical requirements | 0 | ---- | Buy | |
| 75 |
IS 2615 (Part 2) : 2023 |
Pliers and nippers � Part 2 : Methods of test | 0 | ---- | Buy | |
| 76 |
IS 273 : 1990 Reviewed In : 2019 (Fourth Revision) |
Picks and beaters - specification (Fourth Revision) | 1 | Jun, 2019 | Download | |
| 77 |
IS 274 (Part 12) : 1981 Reviewed In : 2019 (Third Revision) |
Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision) | 3 | Jun, 2019 | Download | |
| 78 |
IS 2852 : 1998 Reviewed In : 2019 (First Revision) |
CARPENTERS’ AUGERS - SPECIFICATION ( First Revision ) | 0 | Jun, 2019 | Download | |
| 79 |
IS 2989 : 1980 Reviewed In : 2019 (First Revision) |
Specification for keys for lathe chucks (First Revision) | 0 | Jun, 2019 | Download | |
| 80 |
IS 3082 : 2008 ISO 2936 : 2014 Reviewed In : 2024 ISO 2936 : 2014 (Third Revision) |
Assembly tools for screws and nuts - hexagon socket screw keys (Third Revision) | 0 | Aug, 2024 | Buy | |
| 81 |
IS 3152 : 1980 Reviewed In : 2019 (First Revision) |
Specification for needle files (First Revision) | 0 | Jun, 2019 | Download | |
| 82 |
IS/ISO 3318 : 2009 Reviewed In : 2019 ISO 3318 : 2016 |
Assembly tools for screws and nuts - Double - Headed open - Ended wrenches, double - Headed box wrenches and combination wrenches - Maximum widths of heads | 0 | Jun, 2019 | Buy | |
| 83 |
IS/ISO 3318 : 2016 (First Revision) |
Assembly tools for screws and nuts - Open-ended wrenches, box wrenches and combination wrenches - Maximum widths of heads ( first revision) | 0 | ---- | Buy | |
| 84 |
IS 3529 : 1966 Reviewed In : 2019 |
Specification for eyelet pliers | 0 | Jun, 2019 | Download | |
| 85 |
IS 3552 : 2023 (Third Revision) |
Pliers and nippers � Pliers for gripping and manipulating � Dimensions and test values (ISO 5745 : 2004 MOD) Third Revision | 0 | ---- | Buy | |
| 86 |
IS 3568 : 1990 ISO 5745 : 1982 Reviewed In : 2021 ISO 5745 : 1982 (First Revision) |
Round nose pliers - Specification (First Revision) | 0 | Mar, 2021 | Buy | |
| 87 |
IS 3569 : 1966 Reviewed In : 2019 |
Specification for burner pliers | 0 | Jun, 2019 | Download | |
| 88 |
IS 3587 : 1986 Reviewed In : 2019 (Second Revision) |
Specification for rasps (Second Revision) | 1 | Jun, 2019 | Download | |
| 89 |
IS 3650 : 1981 Reviewed In : 2022 (Second Revision) |
Specification for combination side cutting pliers (Second Revision) | 1 | Mar, 2022 | Download | |
| 90 |
IS 4003 (Part 1) : 1978 Reviewed In : 2021 (First Revision) |
Specification for pipe wrenches: Part 1 general purpose (First Revision) | 2 | Mar, 2021 | Download | |
| 91 |
IS 4003 (Part 1) : 2024 (Second Revision) |
Pipe Wrenches - Specification Part 1 General Purpose(Second revision) | 0 | ---- | Buy | |
| 92 |
IS 4003 (Part 2) : 1986 Reviewed In : 2019 (First Revision) |
Specification for pipe wrenches: Part 2 heavy duty (First Revision) | 2 | Jun, 2019 | Download | |
| 93 |
IS 4017 : 1992 Reviewed In : 2019 (First Revision) |
CARPENTERS SQUARES - SPECIFICATION ( First Revision ) | 0 | Jun, 2019 | Download | |
| 94 |
IS 402 : 1990 Reviewed In : 2019 (Third Revision) |
Cold chisels - Specification (Third Revision) | 1 | Jun, 2019 | Download | |
| 95 |
IS 4095 : 1991 Reviewed In : 2019 (Second Revision) |
Pincers - Specification (Second Revision) | 0 | Jun, 2019 | Download | |
| 96 |
IS 4123 : 1982 Reviewed In : 2021 (First Revision) |
Specification for chain pipe wrenches (First Revision) | 3 | Mar, 2021 | Download | |
| 97 |
IS 4123 : 2024 (Second Revision) |
CHAIN PIPE WRENCHES — SPECIFICATION (second revision) | 0 | ---- | Buy | |
| 98 |
IS 413 : 1974 Reviewed In : 2019 (Second Revision) |
Specification for round punches (Second Revision) | 1 | Jun, 2019 | Download | |
| 99 |
IS 4378 (Part 1) : 2017 ISO 5749 Reviewed In : 2024 ISO 5749 (Third Revision) |
Pliers and nippers: Part 1 diagonal cutting nippers - Dimensions and tests values (Third Revision) | 0 | Aug, 2024 | Buy | |
| 100 |
IS 4378 (Part 2) : 2018 ISO 5748 Reviewed In : 2024 ISO 5748 (Third Revision) |
Pliers and nippers: Part 2 end cutting nippers - Dimensions and test values (Third Revision) | 0 | Aug, 2024 | Buy | |
| 101 |
IS 4481 : 1988 Reviewed In : 2019 (First Revision) |
Specification for duck - Bill pliers (First Revision) | 0 | Jun, 2019 | Download | |
| 102 |
IS 4485 : 1968 Reviewed In : 2021 |
Specification for track spanners for railways | 1 | Jul, 2021 | Download | |
| 103 |
IS 4506 : 1989 Reviewed In : 2021 (First Revision) |
Hand tools - Fork & general purpose - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 104 |
IS 4508 : 1992 Reviewed In : 2024 (First Revision) |
Open ended slugging wrenches (Spanners) - specification (First Revision) | 2 | Aug, 2024 | Download | |
| 105 |
IS 4508 : 2024 (Second Revision) |
OPEN ENDED SLUGGING WRENCHES ( SPANNERS ) - SPECIFICATION ( Second Revision ) | 0 | ---- | Buy | |
| 106 |
IS 4509 : 2024 (Second Revision) |
RING SLUGGING WRENCHES (SPANNERS) — SPECIFICATION (second revision) | 0 | ---- | Buy | |
| 107 |
IS 4509 : 1992 Reviewed In : 2024 (First Revision) |
Ring slugging wrenches (Spanners) - specification (First Revision) | 2 | Aug, 2024 | Download | |
| 108 |
IS 4595 : 1969 Reviewed In : 2021 |
GENERAL REQUIREMENTS FOR NON-SPARKING TOOLS | 0 | Mar, 2021 | Download | |
| 109 |
IS 4806 : 1968 Reviewed In : 2021 |
Specification For Heat Coil Pliers | 0 | Mar, 2021 | Download | |
| 110 |
IS 4915 : 1968 Reviewed In : 2021 |
Specification for welders chipping hammer | 1 | Mar, 2021 | Download | |
| 111 |
IS 4915 : 2024 (First Revision) |
WELDERS CHIPPING HAMMER SPECIFICATION | 0 | ---- | Buy | |
| 112 |
IS 5006 : 1968 Reviewed In : 2019 |
Specification for battery terminal pliers | 0 | Jun, 2019 | Download | |
| 113 |
IS 5066 : 1969 Reviewed In : 2019 |
Specification for glass pliers | 0 | Jun, 2019 | Download | |
| 114 |
IS 5067 : 1969 Reviewed In : 2019 |
SpecificatfOn for fencing pliers | 0 | Jun, 2019 | Download | |
| 115 |
IS 5068 : 1969 Reviewed In : 2019 |
Specification for grab hook | 0 | Jun, 2019 | Download | |
| 116 |
IS 5087 : 1969 Reviewed In : 2021 |
Specification for wire stripping pliers | 1 | Mar, 2021 | Download | |
| 117 |
IS 5098 : 1969 Reviewed In : 2021 |
Specification for cross - Cut and rip saws | 0 | Mar, 2021 | Download | |
| 118 |
IS 510 : 1986 Reviewed In : 2019 (Third Revision) |
Specification for Blacksmiths anvil (Third Revision) | 0 | Jun, 2019 | Download | |
| 119 |
IS 5122 : 1969 Reviewed In : 2019 |
Specification for tyre levers | 0 | Jun, 2019 | Download | |
| 120 |
IS 5123 : 1969 Reviewed In : 2021 |
Specification for tenon and dovetail saws | 0 | Mar, 2021 | Download | |
| 121 |
IS 5167 : 1981 IS 5167 : 2003 Reviewed In : 2021 IS 5167 : 2003 (First Revision) |
Specification for punched open - Jaw wrenches (Spanners) (First Revision) | 0 | Mar, 2021 | Buy | |
| 122 |
IS 5169 : 1986 Reviewed In : 2019 (First Revision) |
Specification for hacksaw frames (First Revision) | 0 | Jun, 2019 | Download | |
| 123 |
IS 5200 : 1998 Reviewed In : 2019 (First Revision) |
Bolt clippers - Specification (First Revision) | 0 | Jun, 2019 | Download | |
| 124 |
IS 552 : 1965 Reviewed In : 2019 |
Specification for smith bits (Revised) | 0 | Jun, 2019 | Download | |
| 125 |
IS 5657 : 1970 Reviewed In : 2021 |
Specification for jim crows | 1 | Mar, 2021 | Download | |
| 126 |
IS 5658 : 1990 Reviewed In : 2021 (First Revision) |
Snipe nose pliers - Specification (First Revision) | 0 | Mar, 2021 | Buy | |
| 127 |
IS 5663 : 1970 Reviewed In : 2021 |
Specification for Brick and Mason | 0 | Mar, 2021 | Download | |
| 128 |
IS 5684 : 1970 Reviewed In : 2021 |
Specification for pipe vices (Chain Type) | 1 | Mar, 2021 | Download | |
| 129 |
IS 5697 : 1970 Reviewed In : 2021 |
Specification for ripping chisels | 1 | Mar, 2021 | Download | |
| 130 |
IS 5991 : 1971 Reviewed In : 2021 |
Specification for ballast rakes | 1 | Mar, 2021 | Download | |
| 131 |
IS 5995 : 1971 Reviewed In : 2021 |
Specification for pipe grip pliers | 1 | Mar, 2021 | Download | |
| 132 |
IS 6000 : 1971 Reviewed In : 2021 |
Specification for rail tongs for railways | 0 | Mar, 2021 | Download | |
| 133 |
IS 6002 : 1992 Reviewed In : 2019 (First Revision) |
Tommy bars for box spanners - Specification (First Revision) | 0 | Jun, 2019 | Download | |
| 134 |
IS 6007 : 1971 Reviewed In : 2021 |
Specification for pipe vices (Hinged Type) | 0 | Mar, 2021 | Download | |
| 135 |
IS 6078 : 2017 Reviewed In : 2024 ISO TR 23244 : 2020 (Second Revision) |
PLIERS AND NIPPERS ENGINEERS AND LINEMANS PLIERS DIMENSIONS AND TEST VALUES | 0 | Aug, 2024 | Buy | |
| 136 |
IS 6086 : 2016 ISO 5747 : 1995 Reviewed In : 2021 ISO 5747 : 1995 (Second Revision) |
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values (Second Revision) | 0 | Mar, 2021 | Buy | |
| 137 |
IS 6087 : 1971 Reviewed In : 2021 |
Specification for metal cutting shears | 0 | Mar, 2021 | Download | |
| 138 |
IS 6118 : 2017 ISO 8976 : 2004 Reviewed In : 2024 ISO 8976 : 2004 (Second Revision) |
Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (Second Revision) | 0 | Aug, 2024 | Buy | |
| 139 |
IS 6129 : 1971 Reviewed In : 2019 |
Specification for square box wrenches (Spanners) | 0 | Jun, 2019 | Download | |
| 140 |
IS 6130 : 1989 Reviewed In : 2019 (First Revision) |
Single square socket tee wrenches (Spanners) - Specification | 0 | Jun, 2019 | Download | |
| 141 |
IS 6131 : 1980 Reviewed In : 2024 (First Revision) |
Technical requirements for, hand operated wrenches (Spanners) and sockets (First Revision) | 1 | Aug, 2024 | Buy | |
| 142 |
IS 6149 : 1984 Reviewed In : 2021 (First Revision) |
Specification for single - Ended open - Jaw adjustable wrenches (First Revision) | 2 | Mar, 2021 | Download | |
| 143 |
IS 6293 : 2023 ISO 8102-20:2022 ISO 8102-20:2022 (Fourth Revision) |
Assembly tools for screws and nuts Nomenclature Fourth Revision | 0 | ---- | Buy | |
| 144 |
IS 6374 : 1971 Reviewed In : 2021 |
Specification for hexagonal box wrenches (Spanners) | 0 | Mar, 2021 | Download | |
| 145 |
IS 6375 : 1991 Reviewed In : 2019 (First Revision) |
Wood splitting wedges - Specification (First Revision) | 0 | Jun, 2019 | Download | |
| 146 |
IS 6379 : 1989 Reviewed In : 2021 (First Revision) |
Single ended ring wrenches (Spanners) - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 147 |
IS 6389 : 1998 Reviewed In : 2019 (First Revision) |
Combination wrenches with equal openings - Specification (Second Revision) | 1 | Jun, 2019 | Buy | |
| 148 |
IS 6546 : 1989 Reviewed In : 2021 (First Revision) |
Claw hammers - Specification (First Revision) | 1 | Mar, 2021 | Download | |
| 149 |
IS 663 : 1980 Reviewed In : 2019 (Second Revision) |
Specification for adzes (Second Revision) | 0 | Jun, 2019 | Download | |
| 150 |
IS/ISO 6789-1 : 2017 Reviewed In : 2024 |
Assembly tools for screws and nuts Hand torque tools Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance | 0 | Aug, 2024 | Buy | |
| 151 |
IS/ISO 6789-2 : 2017 ISO 19007:2018 Reviewed In : 2024 ISO 19007:2018 |
Assembly tools for screws and nuts Hand torque tools Part 2: Requirements for calibration and determination of measurement uncertainty | 0 | Aug, 2024 | Buy | |
| 152 |
IS 6835 : 1973 Reviewed In : 2021 |
Specification for drifts | 0 | Mar, 2021 | Buy | |
| 153 |
IS 6836 : 1973 Reviewed In : 2021 |
Specification for hand snaps and set - Ups for solid rivets | 1 | Mar, 2021 | Download | |
| 154 |
IS 6837 : 1973 Reviewed In : 2019 |
Specification for three wheel type pipe cutter | 1 | Jun, 2019 | Download | |
| 155 |
IS 6841 : 1973 Reviewed In : 2021 |
Specification for wrecking bars | 0 | Mar, 2021 | Download | |
| 156 |
IS 6843 : 1984 Reviewed In : 2021 (First Revision) |
Technical Supply Condition For Pipe Cutters (First Revision) | 0 | Mar, 2021 | Download | |
| 157 |
IS 6844 : 1984 Reviewed In : 2021 (First Revision) |
Specification - For wood and leather marking punches (First Revision) | 1 | Mar, 2021 | Download | |
| 158 |
IS 6845 : 1973 Reviewed In : 2021 |
Specification for wire basket for screening ballast | 0 | Mar, 2021 | Download | |
| 159 |
IS 6860 : 1973 Reviewed In : 2021 |
Specification for pin punches | 1 | Mar, 2021 | Download | |
| 160 |
IS 6861 : 1973 Reviewed In : 2021 |
Specification for engineers scrapers | 0 | Mar, 2021 | Download | |
| 161 |
IS 6864 : 1984 Reviewed In : 2021 (First Revision) |
Specification for metal marking punches (First Revision) | 0 | Mar, 2021 | Download | |
| 162 |
IS 6881 : 1973 Reviewed In : 2021 |
Specification for link type pipe cutters | 0 | Mar, 2021 | Download | |
| 163 |
IS 6883 : 1973 Reviewed In : 2021 |
Specification for ballast screen | 0 | Mar, 2021 | Download | |
| 164 |
IS 6891 : 1973 Reviewed In : 2021 |
Carpenters' Auger Bits | 1 | Mar, 2021 | Download | |
| 165 |
IS 6892 : 1973 Reviewed In : 2021 |
Specification for Blacksmiths bick iron | 0 | Mar, 2021 | Download | |
| 166 |
IS 703 : 1999 Reviewed In : 2021 (Second Revision) |
Axes - Specification (Second Revision) | 2 | Mar, 2021 | Download | |
| 167 |
IS 704 : 1984 Reviewed In : 2021 (Second Revision) |
Specification for crow - Bars and claw - Bars (Second Revision) | 2 | Mar, 2021 | Download | |
| 168 |
IS 7040 : 1973 Reviewed In : 2021 |
Specification for Smiths anvil cutters | 0 | Mar, 2021 | Download | |
| 169 |
IS 7041 : 1973 Reviewed In : 2021 |
Specification for carpenters plain brace | 1 | Mar, 2021 | Download | |
| 170 |
IS 7042 : 1973 Reviewed In : 2021 |
Carpenters' Ratchet Brace | 2 | Mar, 2021 | Download | |
| 171 |
IS 7077 : 1973 Reviewed In : 2021 |
Specification for bending bars | 0 | Mar, 2021 | Download | |
| 172 |
IS 7125 : 1974 Reviewed In : 2019 |
Technical supply conditions for carpenters' braces | 0 | Jun, 2019 | Download | |
| 173 |
IS 7177 : 1974 Reviewed In : 2021 (First Revision) |
Specification for centre punches | 0 | Mar, 2021 | Download | |
| 174 |
IS 7214 : 1974 ISO 1174 Reviewed In : 2019 ISO 1174 |
Specification for driving squares for hand socket wrenches | 1 | Jun, 2019 | Buy | |
| 175 |
IS 7222 : 1974 Reviewed In : 2019 |
Specification for engineers ratchet braces | 0 | Jun, 2019 | Download | |
| 176 |
IS 7381 : 1986 ISO 7381 Reviewed In : 2024 ISO 7381 (First Revision) |
Specification for hand operated square drive socket wrenches (First Revision) | 0 | Aug, 2024 | Buy | |
| 177 |
IS 7663 : 1975 Reviewed In : 2019 |
Specification for box spanners for rail screws | 1 | Jun, 2019 | Download | |
| 178 |
IS 7939 : 1976 Reviewed In : 2019 |
Specification for flare nut wrench, double ended, flat | 0 | Jun, 2019 | Download | |
| 179 |
IS 7958 : 1976 Reviewed In : 2019 |
Specification for hand vices | 0 | Jun, 2019 | Download | |
| 180 |
IS 7975 (Part 1) : 1976 Reviewed In : 2019 |
Specification for driving parts for hand - Operated square drive socket wrenches: Part 1 technical supply conditions | 0 | Jun, 2019 | Buy | |
| 181 |
IS 7975 (Part 2) : 2018 Reviewed In : 2024 (Second Revision) |
Assembly tools for screws and nuts - Driving parts for hand - Operated square drive socket wrenches: Part 2 dimensions and tests (Second Revision) | 0 | Aug, 2024 | Buy | |
| 182 |
IS 7989 : 1976 Reviewed In : 2019 |
Specification for pliers for internal circlips | 0 | Jun, 2019 | Download | |
| 183 |
IS 7990 : 1976 Reviewed In : 2019 |
Specification for pliers for external circlips | 0 | Jun, 2019 | Download | |
| 184 |
IS 7991 : 2016 ISO 3316 : 2012 Reviewed In : 2021 ISO 3316 : 2012 (Second Revision) |
Attachment for hand operated square drive socket wrenches - Specification (Second Revision) | 0 | Mar, 2021 | Buy | |
| 185 |
IS 7993 : 1988 Reviewed In : 2019 (First Revision) |
Specification for power operated square drive socket wrenches (Impact) (First Revision) | 0 | Jun, 2019 | Buy | |
| 186 |
IS 7996 : 1976 Reviewed In : 2019 |
Specification for driving squares for power socket wrenches | 2 | Jun, 2019 | Buy | |
| 187 |
IS 8177 : 1976 Reviewed In : 2019 |
Specification for pin vices | 0 | Jun, 2019 | Download | |
| 188 |
IS 8202 : 1999 Reviewed In : 2021 (First Revision) |
Carpenter's Wooden Bodies Planes | 0 | Mar, 2021 | Download | |
| 189 |
IS 841 : 1983 Reviewed In : 2021 (Second Revision) |
Specification for steel hammers (Second Revision) | 3 | Mar, 2021 | Download | |
| 190 |
IS 842 : 1968 Reviewed In : 2019 (First Revision) |
Smith's Swages | 2 | Jun, 2019 | Download | |
| 191 |
IS 843 : 1968 Reviewed In : 2019 (First Revision) |
SPECIFICATION FOR SMITH’S TONGS (First Revision) | 0 | Jun, 2019 | Download | |
| 192 |
IS 844 (Part 1) : 1979 Reviewed In : 2021 (Second Revision) |
Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn) | 0 | Mar, 2021 | Buy | |
| 193 |
IS 844 (Part 2) : 1979 Reviewed In : 2021 (Second Revision) |
Specification for screwdrivers: Part 2 dimensions (Second Revision) | 0 | Mar, 2021 | Download | |
| 194 |
IS 844 (Part 3) : 1979 Reviewed In : 2021 (Second Revision) |
Specification for screw drivers: Part 3 dimensions for screw drivers for recessed head screws (Second Revision) | 1 | Mar, 2021 | Download | |
| 195 |
IS 845 : 1974 Reviewed In : 2019 (First Revision) |
Specification for swage blocks and stands (Firsf Revision) | 0 | Jun, 2019 | Download | |
| 196 |
IS 846 : 1968 Reviewed In : 2021 (First Revision) |
Specification for Smith flatters (First Revision) | 0 | Mar, 2021 | Download | |
| 197 |
IS 847 : 1968 Reviewed In : 2021 (First Revision) |
Specification for Smith Fullers (First Revision) | 0 | Mar, 2021 | Download | |
| 198 |
IS 8668 : 1984 ISO 2352 : 1982 Reviewed In : 2021 ISO 2352 : 1982 (First Revision) |
Dimensions for spiral ratchet screw driver shanks (First Revision) | 0 | Mar, 2021 | Buy | |
| 199 |
IS 8669 : 2014 ISO 1173 : 2001 Reviewed In : 2024 ISO 1173 : 2001 (Second Revision) |
Assembly tools for screws and nuts - Drive ends for hand - And machine - Operated screwdriver bits and connecting parts - Dimensions, torque testing (Second Revision) | 0 | Aug, 2024 | Buy | |
| 200 |
IS 8670 : 1977 Reviewed In : 2019 |
Specification for screwdrivers for hexagon insert bits | 0 | Jun, 2019 | Download | |
| 201 |
IS 8671 : 1977 Reviewed In : 2019 |
Specification for nail puller | 0 | Jun, 2019 | Download | |
| 202 |
IS 8672 : 1989 Reviewed In : 2019 (First Revision) |
Pliers - Flat nose without cutter, short - Specification (First Revision) | 0 | Jun, 2019 | Buy | |
| 203 |
IS 8673 : 1977 Reviewed In : 2019 |
Specification for Farrier | 0 | Jun, 2019 | Download | |
| 204 |
IS 9063 : 1986 Reviewed In : 2019 (First Revision) |
Specification for hook spanners (First Revision) | 0 | Jun, 2019 | Download | |
| 205 |
IS 9064 : 1979 Reviewed In : 2021 |
Specification for copper hammers | 0 | Mar, 2021 | Download | |
| 206 |
IS 9065 : 1979 Reviewed In : 2021 |
Specification for aluminium hammers | 1 | Mar, 2021 | Download | |
| 207 |
IS 9181 : 1988 Reviewed In : 2019 (First Revision) |
Specification for C - Clamps (First Revision) | 0 | Jun, 2019 | Download | |
| 208 |
IS 9193 : 1988 Reviewed In : 2019 (First Revision) |
Specification for bearing pullers (First Revision) | 0 | Jun, 2019 | Download |