Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 72
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 11537 : 1985 Reviewed In : 2017 Reaffirmed but not taken up for revision |
Specification for centrifugal switch for single - Phase induction motors | 0 | Download | ||
| 2 |
IS 12065 : 1987 Reviewed In : 2019 |
Permissible limits of noise levels for rotating electrical machines | 1 | Mar, 2019 | Buy | |
| 3 |
IS 12075 : 2008 Reviewed In : 2018 (First Revision) |
Mechanical vibration of rotating electrical machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity (First Revision) | 0 | Jul, 2018 | Buy | |
| 4 |
IS 12075 : 2024 (Second Revision) |
Mechanical Vibration of Rotating Electrical Machines with Shaft Heights 56 mm and Higher —Measurement, Evaluation and Limits of Vibration Severity (IEC 60034-14 : 2018, MOD) (Second Revision) | 0 | ---- | Buy | |
| 5 |
IS 1231 : 2019 Reviewed In : 2024 (Fourth Revision) |
Dimensions and Output Series of Foot Mounted Induction Motors — Frame Numbers 56 to 315 L ( Fourth Revision ) | 0 | Jun, 2024 | Buy | |
| 6 |
IS 12615 : 2018 (Third Revision) |
Line Operated Three Phase a.c. Motors ( IE CODE ) “Efficiency Classes and Performance Specification” ( Third Revision ) | 2 | ---- | Buy | |
| 7 |
IS 12642 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Brush - Holders for slip rings group R, type RA - Specification | 0 | Mar, 2019 | Buy | |
| 8 |
IS 12998 : 2024 |
Acoustics Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines | 0 | ---- | Buy | |
| 9 |
IS 13364 (Part 1) : 1992 Reviewed In : 2024 |
Ac generators driven by reciprocating internal combustion engines - Specification: Part 1 alternators rated up to 20 kVa | 0 | Aug, 2024 | Buy | |
| 10 |
IS 13364 (Part 2) : 1992 Reviewed In : 2024 |
Ac generators driven by reciprocating internal combustion engines - Specification: Part 2 alternators rated above 20 kVa and up to 1250 kVa | 1 | Aug, 2024 | Buy | |
| 11 |
IS 13466 : 1992 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Brushes for electrical machines - Specification | 0 | Buy | ||
| 12 |
IS 13525 : 1992 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Flexible conductors for carbon brushes - Specification | 0 | Buy | ||
| 13 |
IS 13529 : 2021 ISO/IEC 30136:2018 (First Revision) |
ROTATING ELECTRICAL MACHINES PART 26 EFFECTS OF UNBALANCED VOLTAGES ON THE PERFORMANCE OF THREE-PHASE CAGE INDUCTION MOTORS | 0 | ---- | Buy | |
| 14 |
IS 13555 : 1993 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Guide for selection and appltcation of 3 - Phase AC induction motors for different types of driven equipment | 0 | Mar, 2019 | Download | |
| 15 |
IS 13584 : 1993 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Brush materials for electrical machinery - Specification | 0 | Mar, 2019 | Buy | |
| 16 |
IS 13586 : 2023 (First Revision) |
Carbon Brushes Brush Holders Commutators and Slip-Rings Definitions and Nomenclature | 0 | ---- | Buy | |
| 17 |
IS 13937 (Part 1) : 1994 ISO 7574/1 Reviewed In : 2022 ISO 7574/1 |
Statistical methods of determining and verifying stated noise emission values of machinery and equipment: Part 1 general considerations and definitions | 0 | Nov, 2022 | Buy | |
| 18 |
IS 13937 (Part 2) : 1994 ISO 7574/2 Reviewed In : 2024 ISO 7574/2 |
Statistical methods of determining and verifying stated noise emission values of machinery and equipment: Part 2 methods for stated values for individual machines | 0 | Aug, 2024 | Buy | |
| 19 |
IS 13937 (Part 3) : 1994 ISO 7574/3 Reviewed In : 2022 ISO 7574/3 |
Statistical methods for determining and verifying stated noise emission values of machinery and equipment: Part 3 simple (Transition) method for stated values for batches of machines | 0 | Nov, 2022 | Buy | |
| 20 |
IS 13937 (Part 4) : 1994 ISO 7574/4 Reviewed In : 2022 ISO 7574/4 |
Statistical methods of determining and verifying stated noise emission values of machinery and equipment: Part 4 methods for stated values for batches of machines | 0 | Nov, 2022 | Buy | |
| 21 |
IS 14195 : 1994 IECPub 1015: 1990 z Reviewed In : 2024 IECPub 1015: 1990 z |
Brush - Holders for electrical machines - Guide to the measurement of the static thurst applied to brushes | 0 | Jun, 2024 | Buy | |
| 22 |
IS 14196 : 1994 IEC Pub 560 : 1977 Reviewed In : 2023 IEC Pub 560 : 1977 |
Definitions and terminology of brush holders for electrical machines | 0 | Mar, 2023 | Buy | |
| 23 |
IS 14197 : 2023 (First Revision) |
Hydraulic Turbines Storage Pumps and Pump-Turbines - Model Acceptance Tests | 0 | ---- | Buy | |
| 24 |
IS 14376 : 1996 Reviewed In : 2017 Reaffirmed but not taken up for revision |
Brush holders for electrical machines - Specification | 0 | Buy | ||
| 25 |
IS 14377 : 1996 Reviewed In : 2017 |
Specification for three - Phase induction motors for fans used in air - Conditioning and ventilation | 0 | Buy | ||
| 26 |
IS 14569 : 1999 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Commutators for electrical machines - Specification | 0 | Download | ||
| 27 |
IS 14578 : 1999 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Three - Phase induction motors for use in nuclear power plants - Specification | 1 | Mar, 2019 | Download | |
| 28 |
IS 14582 : 2021 ISO/IEC 39794-1:2019 (First Revision) |
Single-phase small ac electric motors for centrifugal pumps for agricultural applications | 0 | ---- | Buy | |
| 29 |
IS 14889 : 2000 Reviewed In : 2015 Reaffirmed but not taken up for revision |
Copper tamping powder for carbon brushes - Specification | 0 | Dec, 2015 | Download | |
| 30 |
IS 15429 : 2004 Reviewed In : 2019 |
Storage, installation and maintenance of DC motors - Code of practice | 0 | Download | ||
| 31 |
IS 15880 : 2009 IEC 60034-17 Reviewed In : 2019 IEC 60034-17 |
Three phase cage induction motors when fed from IGBT converters - Application guide | 0 | Buy | ||
| 32 |
IS 15881 : 2009 Reviewed In : 2019 |
Three phase cage induction motors specifically designed for IGBT converter supply - Specification | 0 | Jun, 2019 | Download | |
| 33 |
IS 15999 (Part 7) : 2024 (Second Revision) |
ROTATING ELECTRICAL MACHINES Part 7: Classification of types of construction mounting arrangements and terminal box position (IM Code) (Second Revision) | 0 | ---- | Buy | |
| 34 |
IS 15999 (Part 1) : 2021 ISO 26262-10:2018 (First Revision) |
Rotating electrical machines - Part 1 : Rating and performance | 0 | ---- | Buy | |
| 35 |
IS 15999 (Part 2/Sec 1) : 2023 (First Revision) |
Rotating Electrical Machines Part 2-1: Standard Methods for Determining Losses and Efficiency from Tests Excluding Machines for Traction Vehicles | 0 | ---- | Buy | |
| 36 |
IS 15999 (Part 3) : 2023 (First Revision) |
ROTATING ELECTRICAL MACHINES Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators first revision | 0 | ---- | Buy | |
| 37 |
IS 15999 (Part 4/Sec 1) : 2023 |
ROTATING ELECTRICAL MACHINES Part 4 Electrically excited synchronous machine quantities Section 1 Test methods first revision | 0 | ---- | Buy | |
| 38 |
IS 15999 (Part 15) : 2017 IEC 60034-15 : 2009 Reviewed In : 2024 IEC 60034-15 : 2009 |
Rotating Electrical Machines Part 15 Impulse Voltage Withstand Levels of Form-Wound Stator Coils for Rotating ac Machines | 0 | Jun, 2024 | Buy | |
| 39 |
IS 15999 (Part 18/Sec 41) : 2018 IEC 60034-18-41: 201 IEC 60034-18-41: 201 |
Rotating electrical machines: Part 18 partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters Sec 41 qualification and quality control tests | 0 | ---- | Buy | |
| 40 |
IS 15999 (Part 18/Sec 42) : 2018 IEc 60034-18-42 : 20 IEc 60034-18-42 : 20 |
Rotating Electrical Machines Part 18 Partial Discharge Free Electrical Insulation Systems (Type I) Used in Rotating Electrical Machines Fed From Voltage Converters Section 41 Qualification and quality control tests | 0 | ---- | Buy | |
| 41 |
IS 15999 (Part 20/Sec 1) : 2023 |
Rotating Electrical Machines Part 20-1: Control Motors Stepping Motors | 0 | ---- | Buy | |
| 42 |
IS 15999 (Part 26) : 2016 IEC 60034-26 : 2006 Reviewed In : 2024 IEC 60034-26 : 2006 |
Rotating Electrical Machines Part 26 Effects of Unbalanced Voltages on the Performance of Three-Phase Cage Induction Motors | 0 | Jun, 2024 | Buy | |
| 43 |
IS 2223 : 1983 Reviewed In : 2017 (First Revision) |
Dimensions of flange mounted AC induction motors | 2 | Buy | ||
| 44 |
IS 2254 : 1985 Reviewed In : 2017 (Second Revision) |
Dimensions of vertical shaft motors for pumps (Second Revision) | 0 | Buy | ||
| 45 |
IS 2972 (Part 1) : 1979 Reviewed In : 2017 Reaffirmed but not taken up for revision (First Revision) |
Specification for textile motors: Part 1 loom motors (First Revision) | 2 | Download | ||
| 46 |
IS 2972 (Part 2) : 1979 Reviewed In : 2017 Reaffirmed but not taken up for revision (First Revision) |
Specification for textile motors: Part 2 card motors (First Revision) | 1 | Download | ||
| 47 |
IS 4029 : 2010 Reviewed In : 2016 (First Revision) |
Guide for testing three phase induction motors (First Revision) | 0 | Mar, 2016 | Download | |
| 48 |
IS 4665 (Part 1) : 2023 (Second Revision) |
Hand-Held Motor-Operated Electric Tools Safety Part 1: General requirements Second Revision | 0 | ---- | Buy | |
| 49 |
IS 4665 (Part 2/Sec 1) : 2023 |
Hand-Held Motor-Operated Electric Tools Safety Part 2 Particular requirements Section 1 drills and impact drills | 0 | ---- | Buy | |
| 50 |
IS 4665 (Part 2/Sec 2) : 2023 |
Hand-held motor-operated electric tools - Safety - Part 2 Particular requirements Section 2 screwdrivers and impact wrenches | 0 | ---- | Buy | |
| 51 |
IS 4665 (Part 2/Sec 3) : 2023 |
Hand-held motor-operated electric tools - Safety Part 2 Particular requirements Section 3 grinders polishers and disk-type sanders | 0 | ---- | Buy | |
| 52 |
IS 4665 (Part 2/Sec 5) : 2023 |
Hand-Held Motor-Operated Electric Tools Safety Part 2 Particular Requirements Section 5 Circular Saws | 0 | ---- | Buy | |
| 53 |
IS 4665 (Part 2/Sec 6) : 2023 |
Hand-Held Motor-Operated Electric Tools - Safety Part 2 Particular Requirements Section 6 Hammers | 0 | ---- | Buy | |
| 54 |
IS 4665 (Part 2/Sec 7) : 2023 |
Safety of Hand-Held Motor-Operated Electric Tools Part 2 Particular Requirements Section 7 Spray Guns for Non-Flammable Liquids | 0 | ---- | Buy | |
| 55 |
IS 4758 : 1968 Reviewed In : 2017 |
Methods of measurement of noise emitted by machines | 0 | Buy | ||
| 56 |
IS 5422 : 1996 Reviewed In : 2017 (First Revision) |
Turbine type generators - Specification (First Revision) | 0 | Buy | ||
| 57 |
IS/IEC 60034-5 : 2000 Reviewed In : 2018 IEC 60034 : PART 5 |
Rotating electrical machines: Part 5 degrees of protection provided by the integral design of rotating electrical machines (IP Code) - Classification | 0 | May, 2018 | Buy | |
| 58 |
IS/IEC 60034-8 : 2014 Reviewed In : 2024 IEC 60034-8: 2014 (First Revision) |
Rotating Electrical Machines Part 8 Terminal Markings and Direction of Rotation ( Third Revision ) | 0 | Jun, 2024 | Buy | |
| 59 |
IS/IEC 60034-27-4 : 2018 Reviewed In : 2024 IEC 60034-27-4 |
Rotating Electrical Machines Part 27 Winding Insulation of Rotating Electrical Machines Section 4 Measurement of insulation resistance and polarization index | 0 | Jun, 2024 | Buy | |
| 60 |
IS 6362 : 1995 IEC Pub 34-6 : 1991 zy Reviewed In : 2022 IEC Pub 34-6 : 1991 zy (First Revision) |
Designation of methods of cooling of rotating electrical machines (First Revision) | 0 | Nov, 2022 | Buy | |
| 61 |
IS 7538 : 1996 Reviewed In : 2017 (First Revision) |
Three - Phase squirrel cage induction motors for centrifugal pumps for agricultural application - Specification (First Revision) | 3 | Download | ||
| 62 |
IS 7572 : 1974 Reviewed In : 2017 |
Guide for testing single - Phase AC and universal motors | 0 | Buy | ||
| 63 |
IS 8151 : 1976 Reviewed In : 2017 |
Specification for single - Speed three - Phase induction motors for driving lifts | 2 | Download | ||
| 64 |
IS 8151 : 2024 (First Revision) |
Single-Speed Three-Phase Induction Motors for Driving Lifts - Specification (First Revision) | 0 | ---- | Buy | |
| 65 |
IS 8223 : 1999 IEC 60072-2 (1990) Reviewed In : 2022 IEC 60072-2 (1990) (First Revision) |
Dimensions and output series for rotating electrical machines (First Revision) | 0 | Nov, 2022 | Buy | |
| 66 |
IS 8789 : 2021 ISO/IEC TS 23167 : 2020 (Second Revision) |
Values of performance characteristics for three-phase induction motors with degree of protection 2X | 0 | ---- | Buy | |
| 67 |
IS 900 : 2019 Reviewed In : 2024 (Third Revision) |
Code of Practice for Storage, Installation and Maintenance of Induction Motors ( Third Revision ) | 0 | Jun, 2024 | Download | |
| 68 |
IS 9283 : 2024 (Third Revision) |
LINE OPERATED A.C. MOTORS FOR SUBMERSIBLE PUMPSETS - SPECIFICATION (THIRD REVISION) | 0 | ---- | Buy | |
| 69 |
IS 9283 : 2013 Reviewed In : 2018 (Second Revision) |
Motors for submersible pumpsets - Specification (Second Revision) | 0 | May, 2018 | Download | |
| 70 |
IS 9320 : 1979 Reviewed In : 2017 |
Guide for testing direct - Current (DC) machines | 1 | Mar, 2017 | Buy | |
| 71 |
IS 9919 : 1999 Reviewed In : 2018 Reaffirmed but not taken up for revision (First Revision) |
Guide for selection and use of carbon brushes in electrical rotating machines (First Revision) | 0 | Feb, 2018 | Download | |
| 72 |
IS 996 : 2009 IEC 34-1 (1969 BS 170: 1962 JIS 4203-1973 BS 1608 : 1966 Reviewed In : 2019 IEC 34-1 (1969 BS 170: 1962 JIS 4203-1973 BS 1608 : 1966 (Third Revision) |
Single phase a.c. induction motors for general purpose (Third Revision) | 2 | Buy |