Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 154
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 10216 : 1988 ISO 228-2 : 1987 Reviewed In : 2020 Reaffirmed but not taken up for revision ISO 228-2 : 1987 (First Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Verification by means of limit gauges (First Revision) | 0 | Jan, 2020 | Buy | |
| 2 |
IS 10275 : 1982 Reviewed In : 2022 |
Methods For Assessment of circularity Error From Polar Graphs Obtained By Using Stylus-Type Form-Measuring Instrument | 0 | Mar, 2022 | Download | |
| 3 |
IS 10649 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for ring gauges for drill chuck taper arbors of morse taper and jacob taper type | 0 | Feb, 2019 | Download | |
| 4 |
IS 10685 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200) | 0 | Feb, 2019 | Download | |
| 5 |
IS 11103 : 1984 Reviewed In : 2020 |
Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm) | 0 | Jan, 2020 | Download | |
| 6 |
IS 11498 : 2023 (First Revision) |
Geometrical Product Specifications GPS Dimensional Measuring Equipment: Dial Test Indicators Lever Type Design and Metrological Characteristics | 0 | ---- | Buy | |
| 7 |
IS 12257 (Part 1) : 1987 Reviewed In : 2022 |
Specification for pneumatic length measurement comparators: Part 1 general information on principles and methods | 1 | Mar, 2022 | Download | |
| 8 |
IS 12257 (Part 2) : 1992 Reviewed In : 2022 |
Pneumatic measurement: Part 2 design features of instruments working in high pressure range | 0 | Mar, 2022 | Download | |
| 9 |
IS 12257 (Part 3) : 1992 Reviewed In : 2022 |
Pneumatic measurement: Part 3 parameters of instruments working on high pressure | 0 | Mar, 2022 | Download | |
| 10 |
IS 12257 (Part 4) : 1992 Reviewed In : 2022 |
Pneumatic measurement - Specification: Part 4 general information and examples of application | 0 | Mar, 2022 | Download | |
| 11 |
IS 12257 (Part 5) : 1996 Reviewed In : 2022 |
Pneumatic measurement: Part 5 glossary of terms and definition | 0 | Mar, 2022 | Download | |
| 12 |
IS 12937 : 1990 Reviewed In : 2024 |
Engineering metrology - Methods of testing straightness, flatness and perpendicularity | 1 | Nov, 2024 | Download | |
| 13 |
IS 13907 : 1994 ISO 7863 : 1984 Reviewed In : 2020 ISO 7863 : 1984 |
Height setting micrometers and rising blocks - Specification | 0 | Jan, 2020 | Buy | |
| 14 |
IS 14271 : 1995 Reviewed In : 2020 |
Engineering metrology - Dial snap gauges - Specification | 0 | Jan, 2020 | Download | |
| 15 |
IS 15261 : 2002 ISO 3274 : 1996 Reviewed In : 2023 ISO 3274 : 1996 |
Geometrical product specifications (GPS) - surface texture : profile method - Nominal characteristics of contact (Stylus) instruments | 0 | Aug, 2023 | Buy | |
| 16 |
IS 15264 : 2002 ISO 8785 : 1998 Reviewed In : 2023 ISO 8785 : 1998 |
Geometrical product specification (GPS) - surface imperfections - Terms, definitions and parameters | 0 | Aug, 2023 | Buy | |
| 17 |
IS 15371 (Part 1) : 2023 (First Revision) |
Geometrical product specifications (GPS) � Inspection by measurement of workpieces and measuring equipment: Part 1 Decision rules for verifying conformity or nonconformity with specifications (First Revision) | 0 | ---- | Buy | |
| 18 |
IS 15371 (Part 2) : 2018 ISO 14253-2:2011 Reviewed In : 2023 ISO 14253-2:2011 (First Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 2 guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (First Revision) | 1 | Mar, 2023 | Buy | |
| 19 |
IS 15371 (Part 3) : 2018 ISO 14253-3 : 2011 Reviewed In : 2023 ISO 14253-3 : 2011 (First Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 3 guidelines for achieving agreements on measurement uncertainty statements (First Revision) | 0 | Mar, 2023 | Buy | |
| 20 |
IS 15371 (Part 4) : 2018 ISO/TS 14253-4 ; 2010 Reviewed In : 2023 ISO/TS 14253-4 ; 2010 |
Geometrical Product Specifications (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment Part 4 Background on functional Limits and Specification Limits in Decision Rules | 0 | Mar, 2023 | Buy | |
| 21 |
IS 15371 (Part 5) : 2023 |
Geometrical product specifications (GPS) � Inspection by measurement of workpieces and measuring equipment: Part 5 Uncertainty in verification testing of indicating measuring instruments | 0 | ---- | Buy | |
| 22 |
IS 15371 (Part 6) : 2018 14253-6 : 2012 Reviewed In : 2023 14253-6 : 2012 |
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment Part 6 Generalized Decision Rules for the Acceptance and Rejection of Instruments and Workpieces | 0 | Mar, 2023 | Buy | |
| 23 |
IS 15373 : 2003 ISO 4291 : 1985 Reviewed In : 2023 ISO 4291 : 1985 |
Method for the assessment of departure from roundness - Measurement of variations in radius | 0 | Aug, 2023 | Buy | |
| 24 |
IS 15374 : 2003 ISO 4292 : 1985 Reviewed In : 2019 ISO 4292 : 1985 |
Methods for the assessment of departure from roundness - Measurement by twoand three - Point methods | 0 | Feb, 2019 | Buy | |
| 25 |
IS 15421 (Part 1) : 2003 ISO 13565-1 : 1996 Reviewed In : 2023 ISO 13565-1 : 1996 |
Geometrical product specifications (GPS) - Surface texture: profile method - surfaces having stratified functional properties: Part 1 filtering and general measurement conditions | 0 | Aug, 2023 | Buy | |
| 26 |
IS 15422 : 2003 ISO 12085 : 1996 Reviewed In : 2023 ISO 12085 : 1996 |
Geoivietrical product specifications (GPS) - Surface texture: profile method - motif parameters | 0 | Aug, 2023 | Buy | |
| 27 |
IS 15423 (Part 1) : 2003 ISO 5436-1 : 2000 Reviewed In : 2023 ISO 5436-1 : 2000 |
Geometrical product specifications (GPS) - Surface texture: profile method measurement standards: Part 1 material measures | 0 | Aug, 2023 | Buy | |
| 28 |
IS 15423 (Part 2) : 2024 (First Revision) |
Geometrical Product Specifications (GPS)— Surface Texture — Profile Method — Measurement Standards: Part 2 Software Measurement Standards (first revision) | 0 | ---- | Buy | |
| 29 |
IS 15423 (Part 2) : 2003 ISO 5436-2:2012 Reviewed In : 2019 ISO 5436-2:2012 |
Geometrical product specifications (GPS) - Surface texture: profile method; measurement standards Part 2 software measurement standards | 0 | Feb, 2019 | Buy | |
| 30 |
IS 15635 (Part 1) : 2006 ISO 10360-1 : 2000 Reviewed In : 2022 ISO 10360-1 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 1 vocabulary | 0 | Mar, 2022 | Buy | |
| 31 |
IS 15635 (Part 2) : 2014 ISO 10360-2 : 2009 Reviewed In : 2021 ISO 10360-2 : 2009 (First Revision) |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 2 CMMs used for measuring linear dimensions (First Revision) | 0 | Mar, 2021 | Buy | |
| 32 |
IS 15635 (Part 3) : 2006 ISO 10360-3 : 2000 Reviewed In : 2022 ISO 10360-3 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 3 CMMs with the axis of a rotary table as the fourth axis | 0 | Mar, 2022 | Buy | |
| 33 |
IS 15635 (Part 5) : 2024 (Second Revision) |
Geometrical product specification (GPS)-- Acceptance and reverification tests for coordinate measuring systems CMS: Part 5 CMMs using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (second revision) | 0 | ---- | Buy | |
| 34 |
IS 15635 (Part 6) : 2006 ISO 10360-6 : 2001 Reviewed In : 2021 ISO 10360-6 : 2001 |
Geometrical product specifications (GPS) - acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 estimation of errors in computing gaussian associated features | 1 | Mar, 2021 | Buy | |
| 35 |
IS 15635 (Part 7) : 2019 ISO 10360-7 Reviewed In : 2023 ISO 10360-7 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 7 CMMs equipped with imaging probing systems | 0 | Aug, 2023 | Buy | |
| 36 |
IS 15635 (Part 8) : 2019 ISO 10360-8 Reviewed In : 2023 ISO 10360-8 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 8 CMMs equipped with optical distance sensors | 0 | Aug, 2023 | Buy | |
| 37 |
IS 15635 (Part 9) : 2019 ISO 10360-9 Reviewed In : 2023 ISO 10360-9 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 9 CMMs with multiple probing systems | 0 | Aug, 2023 | Buy | |
| 38 |
IS 15635 (Part 10) : 2023 |
Geometrical product specifications (GPS) � Acceptance and reverification tests for coordinate measuring systems (CMS): Part 10 Laser trackers | 0 | ---- | Buy | |
| 39 |
IS 15635 (Part 12) : 2023 |
Geometrical product specifications (GPS) � Acceptance and reverification tests for coordinate measuring systems (CMS): Part 12 Articulated arm coordinate measurement machines (CMM) | 0 | ---- | Buy | |
| 40 |
IS 15759 : 2023 (First Revision) |
Geometrical Product Specifications (GPS) � Surface Texture: Profile Method � Calibration of Contact (Stylus) Instruments | 0 | ---- | Buy | |
| 41 |
IS 16224 (Part 1) : 2014 ISO 12780-1 : 2011 Reviewed In : 2024 ISO 12780-1 : 2011 |
Geometrical Product Specifications (GPS) - Straightness Part 1 Vocabulary and Parameters of Straightness | 0 | Jul, 2024 | Buy | |
| 42 |
IS 16224 (Part 2) : 2014 ISO 12780-2 : 2011 Reviewed In : 2024 ISO 12780-2 : 2011 |
Geometrical product specifications (GPS) - Straightness: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 43 |
IS 16225 (Part 1) : 2014 ISO 12180-1 : 2011 Reviewed In : 2024 ISO 12180-1 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 1 vocabulary and parameters of cylindrical form | 0 | Jul, 2024 | Buy | |
| 44 |
IS 16225 (Part 2) : 2014 ISO 12180-2 : 2011 Reviewed In : 2024 ISO 12180-2 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 45 |
IS 16226 (Part 1) : 2014 ISO 12181-1 : 2011 Reviewed In : 2024 ISO 12181-1 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 1 vocabulary and parameters of roundness | 0 | Jul, 2024 | Buy | |
| 46 |
IS 16226 (Part 2) : 2014 ISO 12181-2 : 2011 Reviewed In : 2024 ISO 12181-2 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 47 |
IS 16294 (Part 2) : 2016 ISO 12781-2:2011 Reviewed In : 2021 ISO 12781-2:2011 |
Geometrical product specifications (GPS) - Flatness: Part 2 specification operators | 0 | Mar, 2021 | Buy | |
| 48 |
IS 16300 : 2014 ISO/TR 16015 : 2003 Reviewed In : 2024 ISO/TR 16015 : 2003 |
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence | 0 | Jul, 2024 | Buy | |
| 49 |
IS 16491 (Part 1) : 2016 ISO 13385-1:2019 Reviewed In : 2021 ISO 13385-1:2019 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics | 0 | Mar, 2021 | Buy | |
| 50 |
IS 16491 (Part 1) : 2024 (First Revision) |
Geometrical product specifications (GPS) � Dimensional measuring equipment: Part 1 Design and metrological characteristics of callipers (First Revision) | 0 | ---- | Buy | |
| 51 |
IS 16491 (Part 2) : 2016 ISO 13385-2 Reviewed In : 2021 ISO 13385-2 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics | 0 | Mar, 2021 | Buy | |
| 52 |
IS 16748 : 2018 ISO 13102 : 2012 Reviewed In : 2023 ISO 13102 : 2012 |
Geometrical Product Specifications (GPS)-Dimensional Measuring Equipment Electronic Digital-Indicator Gauge-Design and Metrological Characteristics | 0 | Mar, 2023 | Buy | |
| 53 |
IS 18164 : 2023 |
Geometrical product specifications (GPS) � General concepts and requirements for GPS measuring equipment | 0 | ---- | Buy | |
| 54 |
IS 18180 (Part 1) : 2023 |
Geometrical product specifications (GPS) � General concepts: Part 1 Model for geometrical specification and verification | 0 | ---- | Buy | |
| 55 |
IS 18180 (Part 2) : 2023 |
Geometrical product specifications (GPS) � General concepts: Part 2 Basic tenets, specifications, operators, uncertainties and ambiguities | 0 | ---- | Buy | |
| 56 |
IS 18180 (Part 3) : 2023 |
Geometrical product specifications (GPS) � General concepts: Part 3 Toleranced features | 0 | ---- | Buy | |
| 57 |
IS 18180 (Part 4) : 2023 |
Geometrical product specifications (GPS) � Basic concepts: Part 4 Geometrical characteristics for quantifying GPS deviations | 0 | ---- | Buy | |
| 58 |
IS 18229 (Part 1) : 2023 |
Geometrical product specifications (GPS) � Dimensional tolerancing: Part 1 Linear sizes | 0 | ---- | Buy | |
| 59 |
IS 18229 (Part 2) : 2023 |
Geometrical product specifications (GPS) � Dimensional tolerancing: Part 2 Dimensions other than linear or angular sizes | 0 | ---- | Buy | |
| 60 |
IS 18229 (Part 3) : 2023 |
Geometrical product specifications (GPS) � Dimensional tolerancing: Part 3 Angular sizes | 0 | ---- | Buy | |
| 61 |
IS 18231 : 2023 |
Geometrical product specification (GPS) � Tolerancing of moveable assemblies | 0 | ---- | Buy | |
| 62 |
IS 18332 : 2023 |
Geometrical product specifications (GPS) � Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems | 0 | ---- | Buy | |
| 63 |
IS 18430 (Part 1) : 2023 |
Geometrical product specifications GPS Filtration: Part 1 Overview and basic concepts | 0 | ---- | Buy | |
| 64 |
IS 18430 (Part 20) : 2023 |
Geometrical product specifications GPS Filtration: Part 20 Linear profile filters: Basic concepts | 0 | ---- | Buy | |
| 65 |
IS 18430 (Part 21) : 2023 |
Geometrical product specifications GPS Filtration: Part 21 Linear profile filters: Gaussian filters | 0 | ---- | Buy | |
| 66 |
IS 18430 (Part 22) : 2024 |
Geometrical product specifications GPS Filtration: Part 22 Linear profile filters: Spline filters | 0 | ---- | Buy | |
| 67 |
IS 18430 (Part 28) : 2024 |
Geometrical product specifications GPS Filtration : Part 28 Profile filters: End effects | 0 | ---- | Buy | |
| 68 |
IS 18430 (Part 29) : 2024 |
Geometrical product specifications GPS Filtration : Part 29 Linear profile filters: wavelets | 0 | ---- | Buy | |
| 69 |
IS 18430 (Part 30) : 2024 |
Geometrical product specifications (GPS) -- Filtration :Part 30 Robust profile filters: Basic concepts | 0 | ---- | Buy | |
| 70 |
IS 18430 (Part 31) : 2023 |
Geometrical product specifications GPS Filtration: Part 31 Robust profile filters: Gaussian regression filters | 0 | ---- | Buy | |
| 71 |
IS 18430 (Part 40) : 2024 |
Geometrical product specifications (GPS) -- Filtration : Part 40 Morphological profile filters: Basic concepts | 0 | ---- | Buy | |
| 72 |
IS 18430 (Part 41) : 2024 |
Geometrical product specifications (GPS) Filtration : Part 41 Morphological profile filters: Disk and horizontal line-segment filters | 0 | ---- | Buy | |
| 73 |
IS 18430 (Part 49) : 2024 |
Geometrical Product Specifications (GPS)-- Filtration : Part 49 Morphological profile filters: Scale space techniques | 0 | ---- | Buy | |
| 74 |
IS 18430 (Part 60) : 2024 |
Geometrical product specification GPS Filtration : Part 60 Linear areal filters Basic concepts | 0 | ---- | Buy | |
| 75 |
IS 18430 (Part 61) : 2024 |
Geometrical product specification (GPS)-- Filtration : Part 61 Linear areal filters -- Gaussian filters | 0 | ---- | Buy | |
| 76 |
IS 18430 (Part 62) : 2024 |
Geometrical product specifications (GPS) -- Filtration : Part 62 Linear areal filters: spline filters | 0 | ---- | Buy | |
| 77 |
IS 18430 (Part 71) : 2024 |
Geometrical product specifications (GPS)-- Filtration : Part 71 Robust areal filters: Gaussian regression filters | 0 | ---- | Buy | |
| 78 |
IS 18430 (Part 85) : 2024 |
Geometrical product specifications (GPS) -- Filtration : Part 85 Morphological areal filters: Segmentation | 0 | ---- | Buy | |
| 79 |
IS 18431 (Part 73) : 2023 |
Geometrical product specifications GPS Surface texture: Areal: Part 73 Terms and definitions for surface defects on material measures | 0 | ---- | Buy | |
| 80 |
IS 18432 (Part 2) : 2023 |
Geometrical product specifications (GPS) � Surface texture: Profile: Part 2 Terms, definitions and surface texture parameters | 0 | ---- | Buy | |
| 81 |
IS 18432 (Part 3) : 2023 |
Geometrical product specifications GPS Surface texture: Profile: Part 3 Specification operators | 0 | ---- | Buy | |
| 82 |
SP 19 : 1980 Reviewed In : 2021 |
Guidelines for classification of quality of scraped surfaces | 0 | Mar, 2021 | Download | |
| 83 |
IS 2092 : 1983 Reviewed In : 2019 (First Revision) |
Specification for plunger type dial gauges (First Revision) | 1 | Feb, 2019 | Buy | |
| 84 |
IS 2103 : 1980 Reviewed In : 2022 (Second Revision) |
SPECIFICATION FOR ENGINEER - SQUARES ( Second Revision ) | 0 | Mar, 2022 | Download | |
| 85 |
IS 2220 : 1990 Reviewed In : 2020 Reaffirmed but not taken up for revision (First Revision) |
Engineering metrology - Steel straightedges - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 86 |
IS 2251 : 1986 Reviewed In : 2022 (First Revision) |
Specification for plug and ring gauges for self holding tapers (First Revision) | 0 | Mar, 2022 | Download | |
| 87 |
IS 2285 : 2003 ISO 8512-1 : 1990 Reviewed In : 2024 ISO 8512-1 : 1990 (Third Revision) |
Engineering metrology - Measuring equipment - Cast iron surface plates - Specification (Third Revision) | 0 | Jul, 2024 | Buy | |
| 88 |
IS 2334 : 2001 ISO 1502 : 1996 Reviewed In : 2023 ISO 1502 : 1996 (Second Revision) |
ISO general purpose metric screw threads - Gauges and gauging (Second Revision) | 0 | Aug, 2023 | Buy | |
| 89 |
IS 2554 : 1971 Reviewed In : 2020 Reaffirmed but not taken up for revision (First Revision) |
Specification for cast iron angle plates (First Revision) | 1 | Jan, 2020 | Download | |
| 90 |
IS 2921 : 2016 ISO 13225 Reviewed In : 2021 ISO 13225 (Second Revision) |
Geometrical product specifications (GPS) - Dimensional measuring equipment; height gauges - Design and metrological characteristics (Second Revision) | 0 | Mar, 2021 | Buy | |
| 91 |
IS 2949 : 1992 Reviewed In : 2022 (Second Revision) |
Engineering metrology - Plain V - Blocks for inspection purposes - Specification (Second Revision) | 0 | Mar, 2022 | Download | |
| 92 |
IS 2966 : 1964 Reviewed In : 2019 |
Specification for internal micrometers (Including Stick Micrometers) | 1 | Feb, 2019 | Download | |
| 93 |
IS 2967 : 1983 Reviewed In : 2019 (First Revision) |
Specification for external micrometer (First Revision) | 0 | Feb, 2019 | Buy | |
| 94 |
IS 2984 : 2003 ISO 3650 : 1998 Reviewed In : 2019 ISO 3650 : 1998 (Second Revision) |
Slip gauges - Specification [ISO title : geometrical product specifications (GPS) - length standards : gauge blocks] (Second Revision) | 0 | Feb, 2019 | Buy | |
| 95 |
IS 3073 : 1967 Reviewed In : 2021 |
Assessment of surface roughness | 4 | Mar, 2021 | Download | |
| 96 |
IS 3179 : 1990 Reviewed In : 2020 (Second Revision) |
Engineering metrology - Feeler gauges (second revision) | 0 | Jan, 2020 | Download | |
| 97 |
IS 3179 : 2024 (Third Revision) |
Feeler Gauges — Specification (third revision) | 0 | ---- | Buy | |
| 98 |
IS 3455 : 1971 Reviewed In : 2020 (First Revision) |
Gauging practice for plain workpieces (First Revision) | 4 | Jan, 2020 | Buy | |
| 99 |
IS 3455 (Part 1) : 1985 Reviewed In : 2020 (First Revision) |
Gauging practice for plain workpieces: Part 1 inspection of plain workpieces with indicative measuring instruments | 1 | Jan, 2020 | Buy | |
| 100 |
IS 3485 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision (Second Revision) |
Specification for plain and master setting ring gauges (Size Range From 1 Up To And Including 315 Mm) (Second Revision) | 1 | Feb, 2019 | Download | |
| 101 |
IS 3510 : 1990 Reviewed In : 2020 (First Revision) |
Engineering Metrology - Toolmaker Flats - Specification ( First Revision ) | 0 | Jan, 2020 | Download | |
| 102 |
IS 3512 : 1966 Reviewed In : 2019 |
Specification for Toolmakers Straightedges | 1 | Feb, 2019 | Download | |
| 103 |
IS 4210 : 1967 Reviewed In : 2024 |
Specification for strip feeler gauges for electrical purposes | 1 | Nov, 2024 | Download | |
| 104 |
IS 4211 : 1993 Reviewed In : 2019 (First Revision) |
Gauges - Thread pitch gauges for ISO metric screw threads (Pitch Range 0.4 To 6 Mm) - Specification (First Revision) | 0 | Feb, 2019 | Download | |
| 105 |
IS 4239 : 2023 (Second Revision) |
Bevel protractors -- Specification (second revision) | 0 | ---- | Buy | |
| 106 |
IS 4241 : 1990 Reviewed In : 2020 Reaffirmed but not taken up for revision (First Revision) |
Engineering metrology - Engineer Parallels - Specification ( First Revision ) | 0 | Jan, 2020 | Download | |
| 107 |
IS 4349 : 1987 Reviewed In : 2024 (First Revision) |
Specification for cylindrical setting masters (First Revision) | 0 | Nov, 2024 | Download | |
| 108 |
IS 4440 : 1996 Reviewed In : 2019 Reaffirmed but not taken up for revision (First Revision) |
Engineering metrology - Precision equipment - Slip gauge accessories (First Revision) | 0 | Feb, 2019 | Download | |
| 109 |
IS 4492 : 1968 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for welded V - Blocks (Diameter Range 300 To 2000 Mm) | 1 | Feb, 2019 | Download | |
| 110 |
IS 4563 : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision (First Revision) |
Specification for block squares (First Revision) | 0 | Feb, 2019 | Download | |
| 111 |
IS 4960 : 1968 Reviewed In : 2020 |
Specification for universal and elongated type V - Blocks | 0 | Jan, 2020 | Download | |
| 112 |
IS 4966 (Part 1) : 1969 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauges for serrations: Part 1 for gauging external serrations | 0 | Feb, 2019 | Download | |
| 113 |
IS 4966 (Part 2) : 1969 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauges for serrations: Part 2 for gauging internal serrations | 0 | Feb, 2019 | Download | |
| 114 |
IS 5268 (Part 1) : 1991 Reviewed In : 2022 (First Revision) |
Engineering metrology - Straightedges: Part 1 cast iron straightedges (bow shaped or camel back type and 1-Section or parallel type) (First Revision) | 1 | Mar, 2022 | Download | |
| 115 |
IS 5273 : 1969 Reviewed In : 2019 |
Specification for radius gauges | 2 | Feb, 2019 | Download | |
| 116 |
IS 5359 : 1987 Reviewed In : 2019 (First Revision) |
Specification for sine bars (First Revision) | 0 | Feb, 2019 | Download | |
| 117 |
IS 5388 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision (Second Revision) |
Specification for hexagon handles for plain and threaded plug gauges (Second Revision) | 1 | Feb, 2019 | Download | |
| 118 |
IS 5440 : 1969 Reviewed In : 2020 |
Specification for optical flats | 1 | Jan, 2020 | Download | |
| 119 |
IS 5939 : 1970 Reviewed In : 2022 |
Specification for single angle sine tables | 0 | Mar, 2022 | Download | |
| 120 |
IS 5943 : 1970 Reviewed In : 2022 |
Specification for compound angle sine tables | 0 | Mar, 2022 | Download | |
| 121 |
IS 5979 : 1981 Reviewed In : 2022 (First Revision) |
Specification for sine centres (First Revision) | 0 | Mar, 2022 | Download | |
| 122 |
IS 5980 : 1978 Reviewed In : 2020 Reaffirmed but not taken up for revision (First Revision) |
Specification for bench centres (Firsf Revision) | 0 | Jan, 2020 | Download | |
| 123 |
IS 6137 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision (Second Revision) |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision) | 0 | Feb, 2019 | Download | |
| 124 |
IS 6150 : 1971 Reviewed In : 2019 |
Specification for ISO metric screw thread measuring prisms | 1 | Feb, 2019 | Download | |
| 125 |
IS 6231 : 1971 Reviewed In : 2019 |
Specification for prismatic angle gauges | 0 | Feb, 2019 | Download | |
| 126 |
IS 6232 : 1971 Reviewed In : 2019 |
Specification for cast iron box angle plates | 1 | Feb, 2019 | Download | |
| 127 |
IS 6244 : 1980 Reviewed In : 2022 (First Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision) | 1 | Mar, 2022 | Download | |
| 128 |
IS 6246 : 1980 Reviewed In : 2022 (First Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 120 Up To And Including 250 mm) (First Revision) | 1 | Mar, 2022 | Download | |
| 129 |
IS 6311 : 1978 Reviewed In : 2020 (First Revision) |
Specification for ISO metric screwthread measuring cylinders (First Revision) | 1 | Jan, 2020 | Download | |
| 130 |
IS 6952 : 1990 Reviewed In : 2022 (First Revision) |
Engineering metrology - Cylindrical squares - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 131 |
IS 6973 : 1973 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for precision angle plates | 0 | Jan, 2020 | Download | |
| 132 |
IS 6985 : 1973 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for precision box angle plates | 0 | Jan, 2020 | Download | |
| 133 |
IS 6987 : 1973 Reviewed In : 2020 |
Specification for steel precision polygons | 0 | Jan, 2020 | Download | |
| 134 |
IS 7014 : 1973 Reviewed In : 2020 |
Specification for length bars | 1 | Jan, 2020 | Download | |
| 135 |
IS 7018 (Part 1) : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision (First Revision) |
Technical supply conditions for gauges: part 1 general (First Revision) | 0 | Feb, 2019 | Download | |
| 136 |
IS 7018 (Part 2) : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision (First Revision) |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision) | 0 | Feb, 2019 | Download | |
| 137 |
IS 7018 (Part 3) : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision (First Revision) |
Technical supply conditions for gauges: Part 3 assembly and identification of screw plug gauges for ISO metric screw threads (Size Range Form M1 Upto And Including M200) (First Revision) | 1 | Feb, 2019 | Download | |
| 138 |
IS 7327 : 2003 ISO 8512-2 : 1990 Reviewed In : 2023 ISO 8512-2 : 1990 (Second Revision) |
Engineering metrology - Measuring equipment - Granite surface plates - Specification (Second Revision) | 0 | Aug, 2023 | Buy | |
| 139 |
IS 7599 (Part 1) : 1975 Reviewed In : 2022 |
General requirements for engineer's comparators with stands:Part I engineer's comparators | 0 | Mar, 2022 | Download | |
| 140 |
IS 7599 (Part 2) : 1975 Reviewed In : 2022 |
General Requirements for Engineer's Comparators With Stand - Part II : Comparator Standard | 0 | Mar, 2022 | Download | |
| 141 |
IS 7604 : 1975 Reviewed In : 2022 |
Specification for length bar accessories | 0 | Mar, 2022 | Download | |
| 142 |
IS 7606 : 1982 Reviewed In : 2022 (First Revision) |
Specification for plain adjustable snap gauges (First Revision) | 0 | Mar, 2022 | Download | |
| 143 |
IS 7859 : 1975 Reviewed In : 2020 |
Gauge allowances and manufacturing tolerances for plain gauges for inside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
| 144 |
IS 7876 : 1975 Reviewed In : 2020 |
Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
| 145 |
IS 8023 : 1991 Reviewed In : 2020 (First Revision) |
Gauges - Single ended progressive type plate snap gauges (Up to 160 mm) - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 146 |
IS 8823 : 1978 Reviewed In : 2020 |
Specification for triangular straightedges | 0 | Jan, 2020 | Download | |
| 147 |
IS 8999 : 2003 ISO 7-2 : 2000 Reviewed In : 2023 ISO 7-2 : 2000 (First Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Verification by means of limit gauges (First Revision) | 0 | Aug, 2023 | Buy | |
| 148 |
IS 9475 : 1986 Reviewed In : 2022 (First Revision) |
Specification for plug and ring gauges for self release 7/24 tapers (First Revision) | 0 | Mar, 2022 | Download | |
| 149 |
IS 9483 : 1993 Reviewed In : 2020 (First Revision) |
Measuring instruments - Micrometer heads - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 150 |
IS 9529 : 1980 Reviewed In : 2022 |
Specification for taper plug gauges and taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members | 0 | Mar, 2022 | Download | |
| 151 |
IS 9608 : 1985 Reviewed In : 2020 (First Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size range above M40 up to and Including M120) (First Revision) | 0 | Jan, 2020 | Download | |
| 152 |
IS 9610 : 1985 Reviewed In : 2020 (First Revision) |
Specification for go and no go screw ring gauges for ISO metric screw threads (Size range from M1 up to and including M100) (First Revision) | 0 | Jan, 2020 | Download | |
| 153 |
IS 9631 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision (First Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range From M1 up to and Including M40) (First Revision) | 1 | Feb, 2019 | Download | |
| 154 |
IS/ISO/IEC GUIDE 99 : 2007 Reviewed In : 2022 |
International vocabulary of metrology � Basic and general concepts and associated terms (VIM) | 0 | Mar, 2022 | Buy |