Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 115
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 10068 (Part 1) : 2018 (First Revision) |
Press Working Die Sets (Plain Type) — Specification Part 1 Centre Post Rectangular Die Sets ( First Revision ) | 0 | ---- | Download | |
| 2 |
IS 10068 (Part 2) : 2018 Reviewed In : 2024 (First Revision) |
Press working die sets (Plain Type) - Specification: Part 2 centre post square die sets (First Revision) | 0 | Aug, 2024 | Download | |
| 3 |
IS 10068 (Part 3) : 1990 Reviewed In : 2022 |
Press working die sets - Plain type - Specification: Part 3 centre post round die sets | 0 | Apr, 2022 | Download | |
| 4 |
IS 10068 (Part 4) : 1997 Reviewed In : 2022 |
Press working die sets (Plain Type): Part 4 rear post rectangular die sets - Specification | 0 | Apr, 2022 | Download | |
| 5 |
IS 10068 (Part 5) : 1996 Reviewed In : 2022 |
Press working die sets (Plain Type): Part 5 rear post square die sets - Specification | 0 | Apr, 2022 | Download | |
| 6 |
IS 10068 (Part 6) : 1996 Reviewed In : 2022 |
Press working die sets (Plain Type): Part 6 rear post round die sets - Specification | 0 | Apr, 2022 | Download | |
| 7 |
IS 10644 : 1983 Reviewed In : 2021 |
Recommendation on preferred shut heights for mechanical presses | 1 | Mar, 2021 | Download | |
| 8 |
IS 10650 : 1983 Reviewed In : 2021 Reaffirmed but not taken up for revision |
Specification for pressure pins | 1 | Mar, 2021 | Download | |
| 9 |
IS 10731 : 2000 Reviewed In : 2021 (First Revision) |
Presses - Slide holes for locating the shanks - Dimensions (First Revision) | 0 | Mar, 2021 | Download | |
| 10 |
IS 11344 : 1985 Reviewed In : 2021 Reaffirmed but not taken up for revision |
Dimen - Sions for sintered carbide pellets used in heading dies | 0 | Mar, 2021 | Buy | |
| 11 |
IS 11372 : 1985 Reviewed In : 2021 |
Proforma for purchase specification and technical features for belt drop hammers | 1 | Mar, 2021 | Download | |
| 12 |
IS 11443 (Part 1) : 2016 Reviewed In : 2021 (Second Revision) |
Tools for pressing and moulding - Machined plates: Part 1 machined plates for press tools (Second Revision) | 0 | Mar, 2021 | Download | |
| 13 |
IS 11443 (Part 2) : 2003 Reviewed In : 2024 (First Revision) |
Tools for pressing and moulding - Machined plates: Part 2 machined plates for moulds (First Revision) | 0 | Aug, 2024 | Download | |
| 14 |
IS 11505 : 1986 Reviewed In : 2021 |
Recommendations on terminology of hardmetal heading diesISO title : hardmetal heading dies - Terminology) | 0 | Mar, 2021 | Download | |
| 15 |
IS 11524 : 1986 Reviewed In : 2021 |
Specification for carbide mandrels for tube drawing dies | 0 | Mar, 2021 | Download | |
| 16 |
IS 11684 : 1986 Reviewed In : 2021 Reaffirmed but not taken up for revision |
Test chart for spinning and planishing lathes | 0 | Mar, 2021 | Download | |
| 17 |
IS 11742 : 1986 Reviewed In : 2021 |
Test chart for die sets | 0 | Mar, 2021 | Download | |
| 18 |
IS 12852 : 1989 Reviewed In : 2021 |
Gap frame hydraulic presses up to 4000 KN - Recommendation on preferred capacities and dimensions | 1 | Mar, 2021 | Download | |
| 19 |
IS 12984 : 1990 Reviewed In : 2021 |
Proforma for puruchase specification for plate bending machines | 0 | Mar, 2021 | Download | |
| 20 |
IS 14497 : 1997 Reviewed In : 2024 |
Capacity rating and dimensions for trimming presses | 0 | Aug, 2024 | Download | |
| 21 |
IS 14757 : 2000 Reviewed In : 2021 |
RECOMMENDATIONS ON PREFERRED CAPACITIES AND DIMENSIONS FOR STRAIGHT-SIDED COLUMN TYPE AND FOUR PILLAR TYPE HYDRAULIC PRESSES | 0 | Mar, 2021 | Download | |
| 22 |
IS 14758 : 2000 Reviewed In : 2021 |
Forging machine tools - Glossary of terms | 0 | Mar, 2021 | Download | |
| 23 |
IS 14877 (Part 1) : 2000 Reviewed In : 2021 |
Hydraulic presses - Straight sided column/C - Frame type: Part 1 test chart for geometrical accuracy | 0 | Mar, 2021 | Download | |
| 24 |
IS 14877 (Part 2) : 2002 Reviewed In : 2024 |
Hydraulic presses - Straight sided column/C - Frame type: Part 2 test chart for technical (Performance) evaluation of presses and press brakes | 0 | Aug, 2024 | Download | |
| 25 |
IS 14878 : 2000 Reviewed In : 2021 |
Test chart for plate bending machines | 0 | Mar, 2021 | Download | |
| 26 |
IS 15300 : 2016 ISO 8695:2010 Reviewed In : 2021 ISO 8695:2010 (First Revision) |
Tools for pressing - Punches - Nomenclature and terminology (First Revision) | 0 | Dec, 2021 | Buy | |
| 27 |
IS 15318 : 2003 Reviewed In : 2024 |
Open front mechanical power presses - Vocabulary | 0 | Aug, 2024 | Download | |
| 28 |
IS 15424 (Part 1) : 2018 ISO 9182-1:2013 Reviewed In : 2023 ISO 9182-1:2013 (First Revision) |
Tools for Pressing - Guide Pillars - Part 1 Types (First Revision) | 0 | May, 2023 | Buy | |
| 29 |
IS 15424 (Part 2) : 2018 ISO 9182-2:2013 Reviewed In : 2023 ISO 9182-2:2013 (First Revision) |
Tools for pressing - Guide pillars: Part 2 type A, straight pillars (First Revision) | 0 | May, 2023 | Buy | |
| 30 |
IS 15424 (Part 3) : 2021 ISO 8000-61 : 2016 (Second Revision) |
Tools for pressing — Guide pillars: Part 3 Type B, end-locking pillars (Second Revision) | 0 | ---- | Buy | |
| 31 |
IS 15424 (Part 4) : 2022 ISO/TS 23565:2021 ISO/TS 23565:2021 (Second Revision) |
Tools for pressing — Guide pillars: Part 4 Type C, pillars with taper lead and bush (Second Revision) | 0 | ---- | Buy | |
| 32 |
IS 15424 (Part 5) : 2022 (Second Revision) |
Tools for pressing — Guide pillars: Part 5 Type D, end-locking pillars with flange (Second Revision) | 0 | ---- | Download | |
| 33 |
IS 15448 (Part 1) : 2018 ISO 9448-1:2013 Reviewed In : 2024 ISO 9448-1:2013 (First Revision) |
Tools for pressing - Guide bushes: Part 1 forms (First Revision) | 0 | Aug, 2024 | Buy | |
| 34 |
IS 15448 (Part 2) : 2017 ISO 9448-2 Reviewed In : 2024 ISO 9448-2 (First Revision) |
Tools for pressing - Guide bushes: Part 2 form A, gliding bushes, plain, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 35 |
IS 15448 (Part 3) : 2018 ISO 9448-3 Reviewed In : 2024 ISO 9448-3 (First Revision) |
Tools for pressing - Guide bushes: Part 3 form B, ball cage bushes, plain, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 36 |
IS 15448 (Part 4) : 2018 ISO 9448-4:1991 Reviewed In : 2024 ISO 9448-4:1991 (First Revision) |
Tools for pressing - Guide bushes: Part 4 form C, gliding bushes, headed, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 37 |
IS 15448 (Part 5) : 2018 ISO 9448-5 Reviewed In : 2024 ISO 9448-5 (First Revision) |
Tools for pressing - Guide bushes: Part 5 form D, ball cage bushes, headed, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 38 |
IS 15448 (Part 6) : 2018 ISO 9448-6 Reviewed In : 2023 ISO 9448-6 (First Revision) |
Tools for pressing - Guide bushes: Part 6 form E, gliding bushes, flanged, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 39 |
IS 15448 (Part 7) : 2018 ISO 9448-7:2013 Reviewed In : 2023 ISO 9448-7:2013 (First Revision) |
Tools for pressing - Guide bushes: Part 7 form F, ball cage bushes, flanged, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 40 |
IS 15448 (Part 8) : 2018 ISO 9448-8 Reviewed In : 2023 ISO 9448-8 (First Revision) |
Tools for pressing - Guide bushes: Part 8 form G, gliding bushes, stepped, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 41 |
IS 15448 (Part 9) : 2018 ISO 9448-9 Reviewed In : 2023 ISO 9448-9 (First Revision) |
Tools for pressing - Guide bushes: Part 9 form B, ball cage bushes, plain, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 42 |
IS 15448 (Part 10) : 2018 ISO 9448-10 Reviewed In : 2023 ISO 9448-10 (First Revision) |
Tools for pressing - Guide bushes: Part 10 form E, gliding bushes, flanged, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 43 |
IS 15448 (Part 11) : 2018 ISO 9448-11 Reviewed In : 2023 ISO 9448-11 (First Revision) |
Tools for pressing - Guide bushes: Part 11 form F, ball cage bushes, flanged, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 44 |
IS 15744 : 2007 Reviewed In : 2024 |
Angular Deflection for "C" Frame Mechanical Presses — Specification | 0 | Aug, 2024 | Download | |
| 45 |
IS 15745 : 2007 Reviewed In : 2024 |
Deflection for straight sided mechanical presses - Specification | 0 | Aug, 2024 | Download | |
| 46 |
IS 15746 : 2007 Reviewed In : 2024 |
ANGULAR DEFLECTION FOR ‘C’ FRAME HYDRAULIC PRESSES - SPECIFICATION | 0 | Aug, 2024 | Download | |
| 47 |
IS 15747 : 2007 Reviewed In : 2024 |
Angular deflection for straight sided hydraulic presses - Specification | 0 | Aug, 2024 | Download | |
| 48 |
IS 16727 : 2018 ISO 23480:2013 Reviewed In : 2023 ISO 23480:2013 |
Tools for Pressing — Sliding Plates | 0 | May, 2023 | Buy | |
| 49 |
IS 16728 : 2022 ISO/TR 16476:2016 (Second Revision) |
Tools for pressing � Cam driver plates (First Revision) | 0 | ---- | Buy | |
| 50 |
IS 16793 (Part 1) : 2019 ISO 11900-1:2007 Reviewed In : 2023 ISO 11900-1:2007 |
Tools for pressing - Ball - Lock punch retainers: Part 1 types A and B, rectangular and square for light duty | 0 | May, 2023 | Buy | |
| 51 |
IS 16793 (Part 2) : 2019 ISO 11900-2:2008 Reviewed In : 2023 ISO 11900-2:2008 |
Tools for pressing - Ball - Lock punch retainers: Part 2 types C and D, reduced for light duty | 0 | May, 2023 | Buy | |
| 52 |
IS 16793 (Part 3) : 2018 ISO 11900-3:2004 Reviewed In : 2023 ISO 11900-3:2004 |
Tools for pressing - Ball - Lock punch retainers: Part 3 type E, reduced for heavy duty | 0 | May, 2023 | Buy | |
| 53 |
IS 16794 (Part 1) : 2019 ISO 10242-1:2011 Reviewed In : 2023 ISO 10242-1:2011 |
Tools for pressing - Punch holder shanks: Part 1 type A | 0 | May, 2023 | Buy | |
| 54 |
IS 16794 (Part 2) : 2019 ISO 10242-2:2008 Reviewed In : 2023 ISO 10242-2:2008 |
Tools for pressing - Punch holder shanks: Part 2 type C | 0 | May, 2023 | Buy | |
| 55 |
IS 16794 (Part 3) : 2019 ISO 5621:1984 ISO 5621:1984 |
Tools for pressing Punch holder shanks Part 3 Type D | 0 | ---- | Buy | |
| 56 |
IS 16795 : 2018 ISO 11415:1997 Reviewed In : 2023 ISO 11415:1997 |
Tools for pressing - Die sets | 0 | May, 2023 | Buy | |
| 57 |
IS 16796 : 2022 (First Revision) |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding (First Revision) | 0 | ---- | Download | |
| 58 |
IS 16799 : 2018 ISO 8977:2003 Reviewed In : 2023 ISO 8977:2003 |
Tools for pressing - Matrixes | 0 | May, 2023 | Buy | |
| 59 |
IS 16800 (Part 1) : 2018 ISO 9183-1:2008 Reviewed In : 2023 ISO 9183-1:2008 |
Tools for pressing - Wear plates for press dies: Part 1 type A | 0 | May, 2023 | Buy | |
| 60 |
IS 16800 (Part 2) : 2018 ISO 9183-2:2008 ISO 9183-2:2008 |
Tools for pressing - Wear plates for press dies: Part 2 type B | 0 | ---- | Buy | |
| 61 |
IS 16924 : 2018 ISO 6751:2011 Reviewed In : 2023 ISO 6751:2011 |
Tools for Moulding -Ejector Pins with Cylindrical Head | 0 | May, 2023 | Buy | |
| 62 |
IS 16925 : 2018 ISO 8017 : 2007 Reviewed In : 2023 ISO 8017 : 2007 |
Tools for Moulding - Guide Pillars, Straight and Shouldered, and Locating Guide Pillars, Shouldered | 0 | May, 2023 | Buy | |
| 63 |
IS 16926 : 2018 ISO 8018:2007 Reviewed In : 2023 ISO 8018:2007 |
Tools for Moulding -Guide Bushes, Headed, and Locating Guide Bushes, Headed | 0 | May, 2023 | Buy | |
| 64 |
IS 16927 : 2023 ISO 16073-3:2019 ISO 16073-3:2019 (First Revision) |
Tools for Moulding Angle Pins | 0 | ---- | Buy | |
| 65 |
IS 16928 : 2022 (First Revision) |
Tools for moulding � Ejector sleeves with cylindrical head � Basic series for general purposes (First Revision) | 0 | ---- | Download | |
| 66 |
IS 16929 : 2018 ISO 8406 : 2008 Reviewed In : 2023 ISO 8406 : 2008 |
Tools for Moulding - Mould Bases - Round Locating Elements and Spacers | 0 | May, 2023 | Buy | |
| 67 |
IS 16930 : 2018 ISO 8693 : 2011 Reviewed In : 2023 ISO 8693 : 2011 |
Tools for Moulding - Flat Ejector Pins | 0 | May, 2023 | Buy | |
| 68 |
IS 16931 : 2018 ISO 8694 : 2011 Reviewed In : 2023 ISO 8694 : 2011 |
Tools for Moulding - Shouldered Ejector Pins | 0 | May, 2023 | Buy | |
| 69 |
IS 16932 : 2018 ISO 9449 : 2007 Reviewed In : 2023 ISO 9449 : 2007 |
Tools for Moulding - Centring Sleeves | 0 | May, 2023 | Buy | |
| 70 |
IS 16933 : 2018 ISO 10072:2004 Reviewed In : 2023 ISO 10072:2004 |
Tools for Moulding - Sprue Bushes - Dimensions | 0 | May, 2023 | Buy | |
| 71 |
IS 16934 : 2018 ISO 10073 : 2008 Reviewed In : 2023 ISO 10073 : 2008 |
Tools for Moulding - Support Pillars | 0 | May, 2023 | Buy | |
| 72 |
IS 16935 (Part 1) : 2018 ISO 10907-1:2008 Reviewed In : 2023 ISO 10907-1:2008 |
Tools for Moulding - Locating Rings Part 1 Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium Moulds (Type A and B) | 0 | May, 2023 | Buy | |
| 73 |
IS 16935 (Part 2) : 2018 ISO 10907-2 : 2007 Reviewed In : 2023 ISO 10907-2 : 2007 |
Tools for Moulding - Locating Rings Part 2 Locating Rings for Mounting with Thermal Insulating Sheets in Small or Medium Moulds (Types C and D) | 0 | May, 2023 | Buy | |
| 74 |
IS 17219 (Part 1) : 2019 ISO 11901-1:2003 Reviewed In : 2023 ISO 11901-1:2003 |
Tools for Pressing — Gas Springs Part 1 General Specifications | 0 | May, 2023 | Buy | |
| 75 |
IS 17219 (Part 2) : 2023 (First Revision) |
Tools for pressing Gas springs Part 2: Specification of Accessories | 0 | ---- | Buy | |
| 76 |
IS 17219 (Part 3) : 2022 ISO 24393 : 2008 ISO 24393 : 2008 (Second Revision) |
Tools for pressing Gas springs Part 3: Gas spring with increased spring force and compact built height | 0 | ---- | Buy | |
| 77 |
IS 17219 (Part 4) : 2023 (First Revision) |
Tools for Pressing Gas Springs Part 4 Gas Springs with Increased Spring Force and Same Built Height | 0 | ---- | Buy | |
| 78 |
IS 17220 : 2019 ISO 11903:2008 Reviewed In : 2023 ISO 11903:2008 |
Tools for Pressing — Guide Pillar Mountings | 0 | May, 2023 | Buy | |
| 79 |
IS 17221 : 2022 ISO 8000-64 : 2022 (First Revision) |
Tools for moulding — Components of compression and injection moulds and die casting dies — List of equivalent terms and symbols ( First Revision ) | 0 | ---- | Buy | |
| 80 |
IS 17222 : 2019 ISO 15600:2000 Reviewed In : 2023 ISO 15600:2000 |
Tools for Moulding — Thermal Insulating Sheets for Injection Moulds | 0 | May, 2023 | Buy | |
| 81 |
IS 17223 : 2019 ISO 16366:2008 Reviewed In : 2023 ISO 16366:2008 |
Tools for Pressing — L-Shaped Guides | 0 | May, 2023 | Buy | |
| 82 |
IS 17224 : 2019 ISO 16367:2008 Reviewed In : 2023 ISO 16367:2008 |
Tools for Pressing — Guide plates — U- and V-blocks | 0 | May, 2023 | Buy | |
| 83 |
IS 17225 : 2019 ISO 16915:2003 Reviewed In : 2023 ISO 16915:2003 |
Tools for Moulding — Sprue Pullers | 0 | May, 2023 | Buy | |
| 84 |
IS 17226 : 2019 ISO 16916:2016 Reviewed In : 2023 ISO 16916:2016 |
Tools for Moulding — Tool Specification Sheet for Injection Moulds | 0 | May, 2023 | Buy | |
| 85 |
IS 17227 : 2019 ISO 18084:2011 Reviewed In : 2023 ISO 18084:2011 |
Press Tools for Tablets — Punches and Dies | 0 | May, 2023 | Buy | |
| 86 |
IS 17228 : 2019 ISO 24233:2008 Reviewed In : 2023 ISO 24233:2008 |
Tools for Moulding — Tool Specification Sheet for Diecasting Dies | 0 | May, 2023 | Buy | |
| 87 |
IS 17229 : 2019 ISO 28238:2010 Reviewed In : 2023 ISO 28238:2010 |
Compression and Injection Moulds — Components for Gating Systems | 0 | May, 2023 | Buy | |
| 88 |
IS 17277 (Part 1) : 2019 ISO 16092-1:2017 Reviewed In : 2023 ISO 16092-1:2017 |
Machine Tools Safety — Presses Part 1 General Safety Requirements | 0 | May, 2023 | Buy | |
| 89 |
IS 17277 (Part 2) : 2023 |
Machine Tools Safety Presses Part 2 Safety Requirement for Mechanical Presses | 0 | ---- | Buy | |
| 90 |
IS 17277 (Part 3) : 2021 |
Machine tools safety -- Presses -- Part 3: Safety requirements for hydraulic presses Adoption of ISO 16092-3:2017 ICS 2508001 | 0 | ---- | Download | |
| 91 |
IS 17277 (Part 4) : 2023 |
Machine Tools Safety Presses Part 4 Safety Requirements for Pneumatic Presses | 0 | ---- | Buy | |
| 92 |
IS 2515 : 1978 Reviewed In : 2021 Reaffirmed but not taken up for revision (First Revision) |
Test chart for guillotine shears (First Revision) | 0 | Mar, 2021 | Download | |
| 93 |
IS 4296 (Part 1) : 2016 ISO 6752 : 2008 Reviewed In : 2021 ISO 6752 : 2008 (Second Revision) |
Tools for pressing: Part 1 round punches with 60 degrees conical head and straight shank (Second Revision) | 0 | Mar, 2021 | Buy | |
| 94 |
IS 4296 (Part 2) : 2024 (Second Revision) |
Tools for Pressing Punches Part 2 Punches with Cylindrical Head and Straight or Reduced Shank (second revision) | 0 | ---- | Buy | |
| 95 |
IS 4296 (Part 2) : 2015 Reviewed In : 2021 (First Revision) |
Tools for pressing: Part 2 punches with cylindrical head and straight or reduced shank (First Revision) | 0 | Mar, 2021 | Download | |
| 96 |
IS 4296 (Part 3) : 2015 ISO 9181 : 2007 Reviewed In : 2021 ISO 9181 : 2007 (Second Revision) |
Tools for pressing: Part 3 round punches with 60 degree conical head and reduced shank (Second Revision) | 0 | Mar, 2021 | Buy | |
| 97 |
IS 4592 : 2002 ISO 6899 : 1984 Reviewed In : 2023 ISO 6899 : 1984 (First Revision) |
Acceptance conditions of open mechanical front power presses - Testing of accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 98 |
IS 4593 : 1968 Reviewed In : 2021 |
Test chart for straight - Sided presses | 0 | Mar, 2021 | Download | |
| 99 |
IS 4918 : 1981 Reviewed In : 2024 (First Revision) |
Specification for hard metal (Carbide) wire, bar and tube drawing dies (First Revision ] | 0 | Aug, 2024 | Buy | |
| 100 |
IS 6652 (Part 1) : 1986 Reviewed In : 2021 (First Revision) |
Glossary of terms relating to metal forming machines and tools part 1 metal forming tools (First Revision) | 0 | Mar, 2021 | Download | |
| 101 |
IS 6652 (Part 2) : 1986 Reviewed In : 2021 (First Revision) |
Glossary of terms relating to metal forming machines and tools: Part 2 metal forming machines relating to sheet metal (First Revision ) | 0 | Mar, 2021 | Download | |
| 102 |
IS 6652 (Part 3) : 1986 Reviewed In : 2022 (First Revision) |
Glossary of terms relating to metal for - Ming machines and tools: Part 3 metal forming technology and operations relating to sheet metal ( first revision ) | 0 | Apr, 2022 | Download | |
| 103 |
IS 7468 : 1974 Reviewed In : 2021 |
Recommendation on preferred strokes for mechanical and hydraulic presses | 1 | Mar, 2021 | Download | |
| 104 |
IS 7469 : 1974 Reviewed In : 2024 |
Recommendation on preferred capacities for mechanical and hydraulic presses | 0 | Aug, 2024 | Download | |
| 105 |
IS 7664 : 2005 Reviewed In : 2021 (First Revision) |
Guide pillar for press tool die sets - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 106 |
IS 7706 : 1975 Reviewed In : 2021 |
Specification for bolster plates for gap frame presses without die cushion | 0 | Mar, 2021 | Download | |
| 107 |
IS 7707 : 1975 Reviewed In : 2021 |
Specification for bolster plates for gap frame presses with die cushion | 0 | Mar, 2021 | Download | |
| 108 |
IS 8064 : 2002 Reviewed In : 2024 (Second Revision) |
Method of designation of mechanical and hydraulic presses (Second Revision) | 0 | Aug, 2024 | Download | |
| 109 |
IS 8127 : 2005 Reviewed In : 2021 (Second Revision) |
Guide bushes for press tool die sets - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 110 |
IS 8711 : 2002 Reviewed In : 2024 (First Revision) |
Gap frame open front mechanical presses - Capacity ratings and dimensions (First Revision) | 0 | Aug, 2024 | Buy | |
| 111 |
IS 9266 (Part 1) : 2017 Reviewed In : 2024 (First Revision) |
Press working die sets (Boss Type) - Specification: Part 1 centre post rectangular die sets (First Revision) | 0 | Aug, 2024 | Download | |
| 112 |
IS 9266 (Part 2) : 2019 (First Revision) |
Press working die sets (Boss Type) - Specification: Part 2 centre post square die sets (First Revision) | 0 | ---- | Download | |
| 113 |
IS 9266 (Part 3) : 2019 (First Revision) |
Press working die sets (Boss Type) - Specification: Part 3 centre post round die sets (First Revision) | 0 | ---- | Download | |
| 114 |
IS 9266 (Part 4) : 1990 Reviewed In : 2022 |
Press working die sets (Boss Type) - Specieication: Part 4 centre post reverse rectangular die sets | 0 | Apr, 2022 | Download | |
| 115 |
IS 9888 : 1981 Reviewed In : 2024 |
Dimensions for sintered pellets of hard metal (Carbide) for wire, bar and tube drawing dies | 0 | Aug, 2024 | Buy |