Total Standards : 195
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 5658 : 1990 (1 Revision) |
Snipe nose pliers - Specification (First Revision) | 0 | Mar, 2021 | Buy | |
| 2 | IS 13093 : 2002 (1 Revision) |
Sheet metal body repair steel hammers - General requirements (First Revision) | 0 | Mar, 2021 | Download | |
| 3 | IS 7222 : 1974 |
Specification for engineers ratchet braces | 0 | Jun, 2019 | Download | |
| 4 | IS 3587 : 1986 (2 Revision) |
Specification for rasps (Second Revision) | 1 | Jun, 2019 | Download | |
| 5 | IS 11379 : 1985 |
Specification for wrenches for retaining screw for milling arbor | 0 | Mar, 2021 | Download | |
| 6 | IS 7381 : 1986/ISO 7381 (1 Revision) |
Specification for hand operated square drive socket wrenches (First Revision) | 0 | Jun, 2019 | Buy | |
| 7 | IS 6078 : 2017/ISO 5746 : 2004 (2 Revision) |
PLIERS AND NIPPERS ENGINEERS AND LINEMANS PLIERS DIMENSIONS AND TEST VALUES | 0 | ---- | Buy | |
| 8 | IS 13764 : 1993 |
Pliers and nippers for electronics - Single purpose pliers - Round nose pliers - Specification | 0 | Feb, 2020 | Buy | |
| 9 | IS 17756 : 2021/ISO 21982 : 2020 |
Hard coal and coke - Mechanical sampling : Part 8 methods of testing for bias (First Revision) | 0 | ---- | Buy | |
| 10 | IS 4378 : Part 1 : 2017/ISO 5749 (3 Revision) |
Pliers and nippers: Part 1 diagonal cutting nippers - Dimensions and tests values (Third Revision) | 0 | ---- | Buy | |
| 11 | IS 11941 : 1987 |
Specification For Hand Burnishers | 1 | Mar, 2021 | Download | |
| 12 | IS 7996 : 1976 |
Specification for driving squares for power socket wrenches | 2 | Jun, 2019 | Buy | |
| 13 | IS 846 : 1968 (1 Revision) |
Specification for Smith flatters (First Revision) | 0 | Mar, 2021 | Download | |
| 14 | IS 6375 : 1991 (1 Revision) |
Wood splitting wedges - Specification (First Revision) | 0 | Jun, 2019 | Download | |
| 15 | IS 2028 : 2004 (5 Revision) |
Open jaw wrenches (Spanners) - Specification (Fijih Revision) | 0 | Jun, 2019 | Buy | |
| 16 | IS 6864 : 1984 (1 Revision) |
Specification for metal marking punches (First Revision) | 0 | Mar, 2021 | Download | |
| 17 | IS 5006 : 1968 |
Specification for battery terminal pliers | 0 | Jun, 2019 | Download | |
| 18 | IS 12412 : 1988 |
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws | 0 | Mar, 2021 | Download | |
| 19 | IS 5167 : 1981/IS 5167 : 2003 (1 Revision) |
Specification for punched open - Jaw wrenches (Spanners) (First Revision) | 0 | Mar, 2021 | Buy | |
| 20 | IS 12577 : 1989 |
Sealing pliers - Specification | 0 | Feb, 2020 | Download | |
| 21 | IS 9064 : 1979 |
Specification for copper hammers | 0 | Mar, 2021 | Download | |
| 22 | IS 3082 : 2008/ISO 2936 : 2014 (3 Revision) |
Assembly tools for screws and nuts - hexagon socket screw keys (Third Revision) | 0 | Jun, 2019 | Buy | |
| 23 | IS 10860 : 1984 |
Carpenters' Wooden Bodied Bead Planes | 1 | Mar, 2021 | Download | |
| 24 | IS 7042 : 1973 |
Carpenters' Ratchet Brace | 2 | Mar, 2021 | Download | |
| 25 | IS 5991 : 1971 |
Specification for ballast rakes | 1 | Mar, 2021 | Download | |
| 26 | IS 13380 : 1992 |
Forestry tools - Hole punch, bow saw blades - Specification | 0 | Mar, 2021 | Download | |
| 27 | IS 12521 : 2018/ISO 6788 : 1997 (1 Revision) |
Assembly tool for screws and nuts - Four - Way socket wrenches - Dimensions and torque test (First Revision) | 0 | ---- | Buy | |
| 28 | IS 4017 : 1992 (1 Revision) |
CARPENTERS SQUARES - SPECIFICATION ( First Revision ) | 0 | Jun, 2019 | Download | |
| 29 | IS 11828 : 1987 |
Specification for miniature hand hacksaw frames | 0 | Feb, 2020 | Download | |
| 30 | IS 7975 : Part 2 : 2018 (2 Revision) |
Assembly tools for screws and nuts - Driving parts for hand - Operated square drive socket wrenches: Part 2 dimensions and tests (Second Revision) | 0 | ---- | Buy | |
| 31 | IS 842 : 1968 (1 Revision) |
Smith's Swages | 2 | Jun, 2019 | Download | |
| 32 | IS 6129 : 1971 |
Specification for square box wrenches (Spanners) | 0 | Jun, 2019 | Download | |
| 33 | IS 13888 : 1993 |
Nippers - Lever assisted - End cutting - Specification | 0 | Feb, 2020 | Buy | |
| 34 | IS 6843 : 1984 (1 Revision) |
Technical Supply Condition For Pipe Cutters (First Revision) | 0 | Mar, 2021 | Download | |
| 35 | IS 4508 : 1992 (1 Revision) |
Open ended slugging wrenches (Spanners) - specification (First Revision) | 2 | Jun, 2019 | Download | |
| 36 | IS 12166 : 1987 |
Specification for ratchet screwdrivers | 0 | Feb, 2020 | Download | |
| 37 | IS 12476 : 1988 |
Specification for hexagon drive extensions (Adaptors) for hexagon insert bits for power socket wrenches | 0 | Feb, 2020 | Download | |
| 38 | IS 8670 : 1977 |
Specification for screwdrivers for hexagon insert bits | 0 | Jun, 2019 | Download | |
| 39 | IS 663 : 1980 (2 Revision) |
Specification for adzes (Second Revision) | 0 | Jun, 2019 | Download | |
| 40 | IS 2587 : 1975 (1 Revision) |
Specification for pipe vices (Open Side Type And Fixed Sides Type) (First Revisicn) | 0 | Jun, 2019 | Download | |
| 41 | IS 10375 : 1982 |
Specification for poker | 1 | Mar, 2021 | Download | |
| 42 | IS 6892 : 1973 |
Specification for Blacksmiths bick iron | 0 | Mar, 2021 | Download | |
| 43 | IS 5087 : 1969 |
Specification for wire stripping pliers | 1 | Mar, 2021 | Download | |
| 44 | IS 5657 : 1970 |
Specification for jim crows | 1 | Mar, 2021 | Download | |
| 45 | IS 13040 : 1991 |
Dolly blocks for use in steel body repairs - General requirements | 0 | Mar, 2021 | Download | |
| 46 | IS 274 : Part 1 and 2 : 1981 (3 Revision) |
Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision) | 3 | Jun, 2019 | Download | |
| 47 | IS 3569 : 1966 |
Specification for burner pliers | 0 | Jun, 2019 | Download | |
| 48 | IS 11251 : 1985 |
Specification for bow saw blades | 0 | Mar, 2021 | Download | |
| 49 | IS 7214 : 1974/ISO 1174 |
Specification for driving squares for hand socket wrenches | 1 | Jun, 2019 | Buy | |
| 50 | IS 6007 : 1971 |
Specification for pipe vices (Hinged Type) | 0 | Mar, 2021 | Download | |
| 51 | IS 13763 : 1993 |
Pliers and nippers for electronics - Single purpose nippers - Oblique cutting nippers - Specification | 0 | Feb, 2020 | Buy | |
| 52 | IS 16486 : 2017 |
Method for calibration and classification of torque measuring devices including torque wrench tester | 0 | ---- | Download | |
| 53 | IS 413 : 1974 (2 Revision) |
Specification for round punches (Second Revision) | 1 | Jun, 2019 | Download | |
| 54 | IS 11940 : 1987 |
Specification for hide - Faced hammers | 0 | Feb, 2020 | Download | |
| 55 | IS 7993 : 1988 (1 Revision) |
Specification for power operated square drive socket wrenches (Impact) (First Revision) | 0 | Jun, 2019 | Buy | |
| 56 | IS 845 : 1974 (1 Revision) |
Specification for swage blocks and stands (Firsf Revision) | 0 | Jun, 2019 | Download | |
| 57 | IS 6374 : 1971 |
Specification for hexagonal box wrenches (Spanners) | 0 | Mar, 2021 | Download | |
| 58 | IS 1931 : 2000 (3 Revision) |
ENGINEER’S FILES — SPECIFICATION ( Third Revision) | 1 | Mar, 2021 | Download | |
| 59 | IS 6861 : 1973 |
Specification for engineers scrapers | 0 | Mar, 2021 | Download | |
| 60 | IS 4915 : 1968 |
Specification for welders chipping hammer | 1 | Mar, 2021 | Download | |
| 61 | IS 12403 : 1988 |
Specification for spanners for conveyor belt - Fasteners | 0 | Feb, 2020 | Download | |
| 62 | IS 5123 : 1969 |
Specification for tenon and dovetail saws | 0 | Mar, 2021 | Download | |
| 63 | IS 12522 : 1988 |
Specification for rubber mallets | 0 | Feb, 2020 | Download | |
| 64 | IS 9063 : 1986 (1 Revision) |
Specification for hook spanners (First Revision) | 0 | Jun, 2019 | Download | |
| 65 | IS 2989 : 1980 (1 Revision) |
Specification for keys for lathe chucks (First Revision) | 0 | Jun, 2019 | Download | |
| 66 | IS 10839 : 1984 |
Jewellers' Saw | 1 | Mar, 2021 | Download | |
| 67 | IS 7041 : 1973 |
Specification for carpenters plain brace | 1 | Mar, 2021 | Download | |
| 68 | IS 5697 : 1970 |
Specification for ripping chisels | 1 | Mar, 2021 | Download | |
| 69 | IS 13379 : 1992 |
Forestry tools - Wooden setting cat, bow saw blades - Specification | 0 | Mar, 2021 | Download | |
| 70 | IS 13323 : 2018/ISO 9343 : 2004 (1 Revision) |
Pliers and nippers - Slip joint pliers - Dimensions and test values (First Revision) | 0 | ---- | Buy | |
| 71 | IS 4003 : Part 2 : 1986 (1 Revision) |
Specification for pipe wrenches: Part 2 heavy duty (First Revision) | 2 | Jun, 2019 | Download | |
| 72 | IS 11526 : 2013 (1 Revision) |
Pliers and nippers - Nomenclature (First Revision) | 0 | Feb, 2020 | Download | |
| 73 | IS 7958 : 1976 |
Specification for hand vices | 0 | Jun, 2019 | Download | |
| 74 | IS 841 : 1983 (2 Revision) |
Specification for steel hammers (Second Revision) | 3 | Mar, 2021 | Download | |
| 75 | IS 6118 : 2017/ISO 8976 : 2004 (2 Revision) |
Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (Second Revision) | 0 | ---- | Buy | |
| 76 | IS 13887 : 1993 |
Nippers - Lever assisted - Diagonal cutting - Specification | 0 | Feb, 2020 | Buy | |
| 77 | IS 6841 : 1973 |
Specification for wrecking bars | 0 | Mar, 2021 | Download | |
| 78 | IS 4506 : 1989 (1 Revision) |
Hand tools - Fork & general purpose - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 79 | IS 12153 : 1987 |
Specification for adapters for hexagonal insert bits for use with ratchet screw drivers | 0 | Feb, 2020 | Download | |
| 80 | IS 12470 : 1988 |
Specification for square drive extension for hexagon insert bits for power socket wrenches | 0 | Feb, 2020 | Buy | |
| 81 | IS 8669 : 2014/ISO 1173 : 2001 (2 Revision) |
Assembly tools for screws and nuts - Drive ends for hand - And machine - Operated screwdriver bits and connecting parts - Dimensions, torque testing (Second Revision) | 0 | Jun, 2019 | Buy | |
| 82 | IS 6546 : 1989 (1 Revision) |
Claw hammers - Specification (First Revision) | 1 | Mar, 2021 | Download | |
| 83 | IS 2586 : 1986 (2 Revision) |
Specification for bench vices (Second Revision) | 1 | Jun, 2019 | Download | |
| 84 | IS 10372 : 1982 |
Specification for lock - Grip pliers | 0 | Jun, 2019 | Download | |
| 85 | IS 6891 : 1973 |
Carpenters' Auger Bits | 1 | Mar, 2021 | Download | |
| 86 | IS 5068 : 1969 |
Specification for grab hook | 0 | Jun, 2019 | Download | |
| 87 | IS 552 : 1965 |
Specification for smith bits (Revised) | 0 | Jun, 2019 | Download | |
| 88 | IS 12985 : 1990 |
Nippers, end - Cutting - Toggle lever assisted - Specification | 0 | Mar, 2021 | Buy | |
| 89 | IS 9193 : 1988 (1 Revision) |
Specification for bearing pullers (First Revision) | 0 | Jun, 2019 | Download | |
| 90 | IS 3568 : 1990/ISO 5745 : 1982 (1 Revision) |
Round nose pliers - Specification (First Revision) | 0 | Mar, 2021 | Buy | |
| 91 | IS 11250 : 1985 |
Specification for bow saw frames | 0 | Mar, 2021 | Download | |
| 92 | IS 7177 : 1974 (1 Revision) |
Specification for centre punches | 0 | Mar, 2021 | Download | |
| 93 | IS 6002 : 1992 (1 Revision) |
Tommy bars for box spanners - Specification (First Revision) | 0 | Jun, 2019 | Download | |
| 94 | IS 13762 : 1993 |
Pliers and nippers for electronics - Single purpose nippers - Diagonal cutting nippers - Specification | 0 | Feb, 2020 | Buy | |
| 95 | IS/ISO 3318 : 2009/ISO 3318 : 2009 |
Assembly tools for screws and nuts - Double - Headed open - Ended wrenches, double - Headed box wrenches and combination wrenches - Maximum widths of heads | 0 | Jun, 2019 | Buy | |
| 96 | IS 4123 : 1982 (1 Revision) |
Specification for chain pipe wrenches (First Revision) | 3 | Mar, 2021 | Download | |
| 97 | IS 11874 : 1986 |
Specification for . hexagonal socket offset wrenches | 0 | Feb, 2020 | Download | |
| 98 | IS 7991 : 2016/ISO 3316 : 2012 (2 Revision) |
Attachment for hand operated square drive socket wrenches - Specification (Second Revision) | 0 | Mar, 2021 | Buy | |
| 99 | IS 844 : Part 3 : 1979 (2 Revision) |
Specification for screw drivers: Part 3 dimensions for screw drivers for recessed head screws (Second Revision) | 1 | Mar, 2021 | Download | |
| 100 | IS 6149 : 1984 (1 Revision) |
Specification for single - Ended open - Jaw adjustable wrenches (First Revision) | 2 | Mar, 2021 | Download | |
| 101 | IS 1930 : 2003/ISO 2729 : 1995 (3 Revision) |
Woodworking tools - Chisels and gouges (Third Revision) | 0 | Jun, 2019 | Buy | |
| 102 | IS 6860 : 1973 |
Specification for pin punches | 1 | Mar, 2021 | Download | |
| 103 | IS 4806 : 1968 |
Specification For Heat Coil Pliers | 0 | Mar, 2021 | Download | |
| 104 | IS 12168 : Part 2 : 1987 |
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws | 0 | Feb, 2020 | Buy | |
| 105 | IS 5122 : 1969 |
Specification for tyre levers | 0 | Jun, 2019 | Download | |
| 106 | IS 12515 : 1988 |
Specification for wooden setting cat for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 107 | IS 8673 : 1977 |
Specification for Farrier | 0 | Jun, 2019 | Download | |
| 108 | IS 2852 : 1998 (1 Revision) |
CARPENTERS’ AUGERS - SPECIFICATION ( First Revision ) | 0 | Jun, 2019 | Download | |
| 109 | IS 10838 : 1984 |
Specification for nylon faced hammers | 1 | Mar, 2021 | Download | |
| 110 | IS 7040 : 1973 |
Specification for Smiths anvil cutters | 0 | Mar, 2021 | Download | |
| 111 | IS 5684 : 1970 |
Specification for pipe vices (Chain Type) | 1 | Mar, 2021 | Download | |
| 112 | IS 13345 : 1992 |
Carpenter’s Bevels - Specification | 0 | Feb, 2020 | Download | |
| 113 | IS 844 : Part 1 : 1979 (2 Revision) |
Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn) | 0 | Mar, 2021 | Buy | |
| 114 | IS 4003 : Part 1 : 1978 (1 Revision) |
Specification for pipe wrenches: Part 1 general purpose (First Revision) | 2 | Mar, 2021 | Download | |
| 115 | IS 11458 : 1985 |
Specification For Parallel Clamps | 1 | Mar, 2021 | Download | |
| 116 | IS 7939 : 1976 |
Specification for flare nut wrench, double ended, flat | 0 | Jun, 2019 | Download | |
| 117 | IS 8202 : 1999 (1 Revision) |
Carpenter's Wooden Bodies Planes | 0 | Mar, 2021 | Download | |
| 118 | IS 6087 : 1971 |
Specification for metal cutting shears | 0 | Mar, 2021 | Download | |
| 119 | IS 13766 : 1993 |
Pliers and nippers for electronics - Single purpose pliers - Snipe nose pliers - Specification | 0 | Feb, 2020 | Buy | |
| 120 | IS 6837 : 1973 |
Specification for three wheel type pipe cutter | 1 | Jun, 2019 | Download | |
| 121 | IS 4485 : 1968 |
Specification for track spanners for railways | 1 | Jul, 2021 | Download | |
| 122 | IS 12128 : 1987 |
Specification for reversible handles for cross cut saws | 0 | Mar, 2021 | Download | |
| 123 | IS 12453 : 1988 |
Specification for nut drivers | 0 | Feb, 2020 | Download | |
| 124 | IS 8668 : 1984/ISO 2352 : 1982 (1 Revision) |
Dimensions for spiral ratchet screw driver shanks (First Revision) | 0 | Mar, 2021 | Buy | |
| 125 | IS 6389 : 1998 (1 Revision) |
Combination wrenches with equal openings - Specification (Second Revision) | 1 | Jun, 2019 | Buy | |
| 126 | IS 2030 : 1989 (2 Revision) |
Box spanners - Specification (Second Revision) | 1 | Jun, 2019 | Buy | |
| 127 | IS 6883 : 1973 |
Specification for ballast screen | 0 | Mar, 2021 | Download | |
| 128 | IS 5067 : 1969 |
SpecificatfOn for fencing pliers | 0 | Jun, 2019 | Download | |
| 129 | IS 5200 : 1998 (1 Revision) |
Bolt clippers - Specification (First Revision) | 0 | Jun, 2019 | Download | |
| 130 | IS 12858 : 1989 |
Belt punches for conveyor belt fasteners (Plate type) - Specification | 0 | Mar, 2021 | Download | |
| 131 | IS 9181 : 1988 (1 Revision) |
Specification for C - Clamps (First Revision) | 0 | Jun, 2019 | Download | |
| 132 | IS 3529 : 1966 |
Specification for eyelet pliers | 0 | Jun, 2019 | Download | |
| 133 | IS 10886 : 1984 |
Carpenters' Vice | 1 | Mar, 2021 | Download | |
| 134 | IS 7125 : 1974 |
Technical supply conditions for carpenters' braces | 0 | Jun, 2019 | Download | |
| 135 | IS 6000 : 1971 |
Specification for rail tongs for railways | 0 | Mar, 2021 | Download | |
| 136 | IS 13761 : 1993 |
Pliers and nippers for electronics - Single purpose nippers - End cutting nippers - Specification | 0 | Feb, 2020 | Buy | |
| 137 | IS 4378 : Part 2 : 2018/ISO 5748 (3 Revision) |
Pliers and nippers: Part 2 end cutting nippers - Dimensions and test values (Third Revision) | 0 | ---- | Buy | |
| 138 | IS 4095 : 1991 (2 Revision) |
Pincers - Specification (Second Revision) | 0 | Jun, 2019 | Download | |
| 139 | IS 11848 : 1987 |
Specification for crowfoot spanners | 0 | Feb, 2020 | Buy | |
| 140 | IS 7990 : 1976 |
Specification for pliers for external circlips | 0 | Jun, 2019 | Download | |
| 141 | IS 844 : Part 2 : 1979 (2 Revision) |
Specification for screwdrivers: Part 2 dimensions (Second Revision) | 0 | Mar, 2021 | Download | |
| 142 | IS 6131 : 1980 (1 Revision) |
Technical requirements for, hand operated wrenches (Spanners) and sockets (First Revision) | 1 | Jun, 2019 | Buy | |
| 143 | IS 1759 : 1986 (2 Revision) |
Specification for powrahs (Second Revision) | 2 | Jun, 2019 | Download | |
| 144 | IS 6845 : 1973 |
Specification for wire basket for screening ballast | 0 | Mar, 2021 | Download | |
| 145 | IS 4595 : 1969 |
GENERAL REQUIREMENTS FOR NON-SPARKING TOOLS | 0 | Mar, 2021 | Download | |
| 146 | IS 12168 : Part 1 : 1987 |
Specification for screwdriver bits for use with ratchet screwdrivers: Part 1 for slotted head screws | 0 | Feb, 2020 | Buy | |
| 147 | IS 510 : 1986 (3 Revision) |
Specification for Blacksmiths anvil (Third Revision) | 0 | Jun, 2019 | Download | |
| 148 | IS 12481 : 1988 |
Specification for hexagonal insert bits for hexagon socket head cap screws and hexagon socket set screws for power tools | 0 | Feb, 2020 | Download | |
| 149 | IS 8672 : 1989 (1 Revision) |
Pliers - Flat nose without cutter, short - Specification (First Revision) | 0 | Jun, 2019 | Buy | |
| 150 | IS 6836 : 1973 |
Specification for hand snaps and set - Ups for solid rivets | 1 | Mar, 2021 | Download | |
| 151 | IS 273 : 1990 (4 Revision) |
Picks and beaters - specification (Fourth Revision) | 1 | Jun, 2019 | Download | |
| 152 | IS 10827 : 1984 |
Specification for roving punches | 1 | Mar, 2021 | Download | |
| 153 | IS 704 : 1984 (2 Revision) |
Specification for crow - Bars and claw - Bars (Second Revision) | 2 | Mar, 2021 | Download | |
| 154 | IS 5663 : 1970 |
Specification for Brick and Mason | 0 | Mar, 2021 | Download | |
| 155 | IS 13189 : 1991 |
Lead hammers - Specification | 0 | Feb, 2020 | Download | |
| 156 | IS 7975 : Part 1 : 1976 |
Specification for driving parts for hand - Operated square drive socket wrenches: Part 1 technical supply conditions | 0 | Jun, 2019 | Buy | |
| 157 | IS 3650 : 1981 (2 Revision) |
Specification for combination side cutting pliers (Second Revision) | 1 | Mar, 2022 | Download | |
| 158 | IS 11381 : 1985 |
Specification for extractor cotter pin | 1 | Mar, 2021 | Download | |
| 159 | IS 7663 : 1975 |
Specification for box spanners for rail screws | 1 | Jun, 2019 | Download | |
| 160 | IS 6086 : 2016/ISO 5747 : 1995 (2 Revision) |
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values (Second Revision) | 0 | Mar, 2021 | Buy | |
| 161 | IS 13765 : 1993 |
Pliers and nippers for electronics - Single purpose pliers - Flat nose pliers - Specification | 0 | Feb, 2020 | Buy | |
| 162 | IS 4481 : 1988 (1 Revision) |
Specification for duck - Bill pliers (First Revision) | 0 | Jun, 2019 | Download | |
| 163 | IS 12127 : 1987 |
Specification for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 164 | IS 8177 : 1976 |
Specification for pin vices | 0 | Jun, 2019 | Download | |
| 165 | IS 12413 : 1988 |
Specification for wooden jointer for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 166 | IS 847 : 1968 (1 Revision) |
Specification for Smith Fullers (First Revision) | 0 | Mar, 2021 | Download | |
| 167 | IS 6379 : 1989 (1 Revision) |
Single ended ring wrenches (Spanners) - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 168 | IS 2029 : 1998 (4 Revision) |
Ring wrenches (Spanners) - Specification (Fourth Revision) | 1 | Jun, 2019 | Buy | |
| 169 | IS 6881 : 1973 |
Specification for link type pipe cutters | 0 | Mar, 2021 | Download | |
| 170 | IS 5066 : 1969 |
Specification for glass pliers | 0 | Jun, 2019 | Download | |
| 171 | IS 5169 : 1986 (1 Revision) |
Specification for hacksaw frames (First Revision) | 0 | Jun, 2019 | Download | |
| 172 | IS 12578 : 1989 |
Watch Maker's Hammer, Flat Face | 0 | Mar, 2021 | Download | |
| 173 | IS 9065 : 1979 |
Specification for aluminium hammers | 1 | Mar, 2021 | Download | |
| 174 | IS 3152 : 1980 (1 Revision) |
Specification for needle files (First Revision) | 0 | Jun, 2019 | Download | |
| 175 | IS 10883 : 1984 |
Specification for single wheel type pipe cutters | 1 | Mar, 2021 | Download | |
| 176 | IS 7077 : 1973 |
Specification for bending bars | 0 | Mar, 2021 | Download | |
| 177 | IS 5995 : 1971 |
Specification for pipe grip pliers | 1 | Mar, 2021 | Download | |
| 178 | IS 13636 : 1993 |
Pliers and nippers for electronics - Technical supply conditions | 0 | Feb, 2020 | Buy | |
| 179 | IS 13610 : 2018/ISO 8979 : 2004 (1 Revision) |
Pliers and Nippers for Electronics - Nomenclature (First Revision) | 0 | ---- | Buy | |
| 180 | IS 402 : 1990 (3 Revision) |
Cold chisels - Specification (Third Revision) | 1 | Jun, 2019 | Download | |
| 181 | IS 11847 : 1987 |
Specification for spoke wrenches for bicycle and moped | 0 | Feb, 2020 | Download | |
| 182 | IS 7989 : 1976 |
Specification for pliers for internal circlips | 0 | Jun, 2019 | Download | |
| 183 | IS 843 : 1968 (1 Revision) |
SPECIFICATION FOR SMITH’S TONGS (First Revision) | 0 | Jun, 2019 | Download | |
| 184 | IS 6130 : 1989 (1 Revision) |
Single square socket tee wrenches (Spanners) - Specification | 0 | Jun, 2019 | Download | |
| 185 | IS 15385 : 2003/ISO 2726 : 1995 |
Wood working tools - Metal - Bodied bench planes, plane cutters and cap irons | 0 | Mar, 2021 | Buy | |
| 186 | IS 6844 : 1984 (1 Revision) |
Specification - For wood and leather marking punches (First Revision) | 1 | Mar, 2021 | Download | |
| 187 | IS 4509 : 1992 (1 Revision) |
Ring slugging wrenches (Spanners) - specification (First Revision) | 2 | Jun, 2019 | Download | |
| 188 | IS 12167 : 1987 |
Specification for spiral ratchet screw drivers | 0 | Feb, 2020 | Download | |
| 189 | IS 5098 : 1969 |
Specification for cross - Cut and rip saws | 0 | Mar, 2021 | Download | |
| 190 | IS 12480 : 1988 |
Specification for spiral tapered screw extractors | 0 | Feb, 2020 | Download | |
| 191 | IS 8671 : 1977 |
Specification for nail puller | 0 | Jun, 2019 | Download | |
| 192 | IS 6835 : 1973 |
Specification for drifts | 0 | Mar, 2021 | Buy | |
| 193 | IS 2588 : 1975 (1 Revision) |
Specification for Blacksmiths vice ( First Revision ) | 0 | Jun, 2019 | Download | |
| 194 | IS 10826 : 1984 |
Specification for pad saw | 1 | Mar, 2021 | Download | |
| 195 | IS 703 : 1999 (2 Revision) |
Axes - Specification (Second Revision) | 2 | Mar, 2021 | Download |